Soil Moisture And Ocean Salinity Level Research Articles

About the Optimal Grid for SMOS Level 1C and Level 2 Products

Remotely sensed measurements acquired by the European Space Agency's Soil Moisture and Ocean Salinity (SMOS) satellite are processed in a uniform equal-area grid, the Icosahedral Snyder Equal Area (ISEA) 4H9. Brightness temperature measurements are projected onto that grid (the so-called Level 1C), as well as sea surface salinity and soil moisture estimates (Level 2). The ISEA grid has been chosen for its characteristics of equal area and almost uniform intercell spacing. Nevertheless, when considering the SMOS viewing geometry, the measurement footprint size, and the processing applied to those measurements, this choice may be revisited. With this objective, the ISEA 4H9 grid is compared to other equal-area grids with different sizes and orientations with respect to the satellite track. The best configuration resulted to be a 25-km-width grid symmetrical with respect to satellite track. This grid appeared to be better suited for improving SMOS Level 2 retrieval algorithms as well as to serve as input for higher level data production, since it best accounts for the instrument's viewing geometry and substantially reduces the correlation between adjacent grid cells.

Performance evaluation of WRF-Noah Land surface model estimated soil moisture for hydrological application: Synergistic evaluation using SMOS retrieved soil moisture

Summary This study explores the performance of soil moisture data from the global European Centre for Medium Range Weather Forecasts (ECMWF) ERA interim reanalysis datasets using the Weather Research and Forecasting (WRF) mesoscale numerical weather model coupled with the Noah Land surface model for hydrological applications. For evaluating the performance of WRF for soil moisture estimation, three domains are taken into account. The domain with best performance is used for estimating the soil moisture deficit (SMD). Further, several approaches are presented in this study to evaluate the efficiency of WRF simulated soil moisture for SMD estimation and compared against Soil Moisture and Ocean Salinity (SMOS) downscaled and non-downscaled soil moisture. In this study, the first approach is based on the empirical relationship between WRF soil moisture and the SMD on a continuous time series basis, while the second approach is focused on the vegetation cover impact on SMD retrieval, depicted in terms of growing and non-growing seasons. The linear growing and non-growing seasonal model in combination performs well with the NSE = 0.79, RMSE = 0.011 m; Bias = 0.24 m, in comparison to linear model (NSE = 0.70, RMSE = 0.013 m; Bias = 0.01 m). The performance obtained using WRF soil moisture is comparable to SMOS level 2 product but lower than the downscaled SMOS datasets. The results indicate that methodologies could be useful for modelers working in the field of soil moisture information system and SMD estimation at a catchment scale. The study could be useful for ungauged basins that pose a challenge to hydrological modeling due to unavailability of datasets for proper model calibration and validation.

Towards a long-term dataset of ELBARA-II measurements assisting SMOS level-3 land product and algorithm validation at the Valencia Anchor Station

La misión de SMOS (Soil Moisture and Ocean Salinity) se lanzó el 2 de Noviembre de 2009 con el objetivo de proporcionar datos de humedad del suelo y salinidad del mar. La principal actividad de la conocida como Valencia Anchor Station (VAS) es asistir en la validación a largo plazo de productos de suelo de SMOS. El presente estudio se centra en una validación de datos de nivel 3 de SMOS en la VAS con medidas in situ tomadas en el periodo 2010-2012. El radiómetro Elbara-II está situado dentro de los confines de la VAS, observando un campo de viñedos que se considera representativo de una gran proporción de un área de 50×50 km, suficiente para cubrir un footprint de SMOS. Las temperaturas de brillo (TB) adquiridas por ELBARA-II se compararon con las observadas por SMOS en las mismas fechas y horas. También se utilizó la inversión del modelo L-MEB con el fin de obtener humedades de suelo (SM) que, posteriormente, se compararon con datos de nivel 3 de SMOS. Se ha encontrado una buena correlación entre ambas series de TB, con mejoras año tras año, achacable fundamentalmente a la disminución de precipitaciones en el periodo objeto de estudio y a la mitigación de las interferencias por radiofrecuencia en banda L. La mayor homogeneidad del footprint del radiómetro ELBARA-II frente al de SMOS explica la mayor variabilidad de sus TB. Los periodos de precipitación más intensa (primavera y otoño) también son de mayor SM, lo que corrobora la consistencia de los resultados de SM simulados a través de las observaciones del radiómetro. Sin embargo, se debe resaltar una subestimación por parte de SMOS de los valores de SM respecto a los obtenidos por ELBARA-II, presumiblemente debido a la influencia que la pequeña fracción de suelo no destinado al cultivo de la vid tiene sobre SMOS. Las estimaciones por parte de SMOS en órbita descendente (6 p.m.) resultaron de mayor calidad (mayor correlación y menores RMSE y bias) que en órbita ascendente (6 a.m., momento de mayor humedad de suelo).

Assessment of SMOS soil moisture retrieval parameters using tau–omega algorithms for soil moisture deficit estimation

Soil Moisture and Ocean Salinity (SMOS) is the latest mission which provides flow of coarse resolution soil moisture data for land applications. However, the efficient retrieval of soil moisture for hydrological applications depends on optimally choosing the soil and vegetation parameters. The first stage of this work involves the evaluation of SMOS Level 2 products and then several approaches for soil moisture retrieval from SMOS brightness temperature are performed to estimate Soil Moisture Deficit (SMD). The most widely applied algorithm i.e. Single channel algorithm (SCA), based on tau-omega is used in this study for the soil moisture retrieval. In tau-omega, the soil moisture is retrieved using the Horizontal (H) polarisation following Hallikainen dielectric model, roughness parameters, Fresnel's equation and estimated Vegetation Optical Depth (tau). The roughness parameters are empirically calibrated using the numerical optimization techniques. Further to explore the improvement in retrieval models, modifications have been incorporated in the algorithms with respect to the sources of the parameters, which include effective temperatures derived from the European Center for Medium-Range Weather Forecasts (ECMWF) downscaled using the Weather Research and Forecasting (WRF)-NOAH Land Surface Model and Moderate Resolution Imaging Spectroradiometer (MODIS) land surface temperature (LST) while the s is derived from MODIS Leaf Area Index (LAI). All the evaluations are performed against SMD, which is estimated using the Probability Distributed Model following a careful calibration and validation integrated with sensitivity and uncertainty analysis. The performance obtained after all those changes indicate that SCA-H using WRF-NOAH LSM downscaled ECMWF LST produces an improved performance for SMD estimation at a catchment scale.

Evaluation of Model Parameter Convergence when Using Data Assimilation for Soil Moisture Estimation

Abstract Data assimilation (DA) methods are commonly used for finding a compromise between imperfect observations and uncertain model predictions. The estimation of model states and parameters has been widely recognized, but the convergence of estimated parameters has not been thoroughly investigated. The distribution of model state and parameter values is closely linked to convergence, which in turn impacts the ultimate estimation accuracy of DA methods. This demonstration study examines the robustness and convergence of model parameters for the ensemble Kalman filter (EnKF) and the evolutionary data assimilation (EDA) in the context of the Soil Moisture and Ocean Salinity (SMOS) soil moisture assimilation into the Joint UK Land Environment Simulator in the Yanco area in southeast Australia. The results show high soil moisture estimation accuracy for the EnKF and EDA methods when compared with the open loop estimates during evaluation and validation stages. The level of convergence was quantified for each model parameter in the EDA approach to illustrate its potential in the retrieval of variables that were not directly observed. The EDA was found to have a higher estimation accuracy than the EnKF when its updated members were evaluated against the SMOS level 2 soil moisture. However, the EnKF and EDA estimations are comparable when their forward soil moisture estimates were validated against SMOS soil moisture outside the assimilation time period. This suggests that parameter convergence does not significantly influence soil moisture estimation accuracy for the EnKF. However, the EDA has the advantage of simultaneously determining the convergence of model parameters while providing comparably higher accuracy for soil moisture estimates.

Radiometric Performance of SMOS Full Polarimetric Imaging

This work has been conducted in the framework of several projects devoted to assess the performance of the Soil Moisture and Ocean Salinity (SMOS) mission full-pol measurement mode. Since its launch in November 2009, SMOS is producing dual-polarization brightness temperature synthesized images that are yielding a high scientific return. However, these images are affected by a non-negligible spatial amplitude error, the so-called spatial bias (SB), that degrades geophysical parameter retrieval. This effect is particularly detrimental in SMOS polarimetric images where spatial bias is masking the polarimetric physical signature to a large extend. This paper presents a method to mitigate SMOS spatial bias by taking into account the co- and cross-polar antenna patterns in the image reconstruction algorithm through the, so called, full-pol G-matrix (FPG). The method is validated by producing spatial bias maps out of the comparison between SMOS full-pol images and an accurate polarimetric brightness temperature model of the ocean. This model has been provided to SMOS ESLs (Expert Support Laboratories) by LOCEAN (Laboratoire d'Oceanographie et du Climat, France) as a test bench to validate and improve SMOS Level 1 (L1) data. Finally, a radiometric performance summary table comparing spatial bias and radiometric sensitivity between this new FPG approach and SMOS current co-polar G-matrix approach (CPG) is provided. This paper presents the best quality SMOS polarimetric images, which may lead a breakthrough in the science returns of the mission.

SMOS soil moisture data validation in the Aurajoki watershed, Finland

Soil Moisture and Ocean Salinity (SMOS) level 2 soil moisture observations were validated by the soil moisture simulations of the Watershed Simulation and Forecasting System (WSFS) in the Aurajoki watershed located in Southwest Finland. The validation period included summer seasons 2010–2012. A new 2-layer soil moisture model was developed to simulate soil moisture in two layers, 10 cm thick surface layer and 80 cm thick sub-surface layer, due to low penetration depth of the satellite observations. Both layers of the model were divided into six classes of soil types to characterize the soil properties of the study catchment. The soil parameters for different soil types were estimated using the soil moisture observation network and other model parameters were calibrated against discharge observations. The WSFS with the 2-layer soil moisture model was found appropriate in reproducing observed discharges in the test site. Despite slight dry bias, the SMOS observations were consistent with the simulated surface soil moisture content, giving Nash–Sutcliffe efficiency coefficient of 0.77 and root-mean-square deviation of 0.076. The analysis of the SMOS level 2 data presents promising results for the satellite observations to be used as an indicator of the filling of the soil moisture storage in the WSFS.

Spatial distribution and possible sources of SMOS errors at the global scale

SMOS (Soil Moisture and Ocean Salinity) data have now been available for over two years and, as part of the validation process, comparing this new dataset to already existing global datasets of soil moisture is possible. In this study, SMOS soil moisture product was evaluated globally by using the triple collocation method. This statistical method is based on the comparison of three datasets and produces global error maps by statistically inter-comparing their variations. Only the variable part of the errors are considered here, the bias errors are not treated by triple collocation. This method was applied to the following datasets: SMOS Level 2 product, two soil moisture products derived from AMSR-E (Advanced Microwave Scanning Radiometer)–LPRM (Land Parameter Retrieval Model) and NSIDC (National Snow and Ice Data Center), ASCAT (Advanced Scatterometer) and ECMWF (European Center for Medium range Weather Forecasting). The resulting errors are not absolute since they depend on the choice of the datasets. However this study showed that the spatial structure of the SMOS was independent of the combination and pointed out the same areas where SMOS performed well and where it did not. This global SMOS error map was then linked to other global parameters such as soil texture, RFI (Radio Frequency Interference) occurrence probabilities and land cover in order to identify their influences in the SMOS error. Globally the presence of forest in the field of view of the radiometer seemed to have the greatest influence on SMOS error (56.8%) whereas RFI represented 1.7% according to the analysis of variance from a multiple linear regression model. These percentages were not identical for all the continents and some discrepancies in the proportion of the influence were highlighted: soil texture was the main influence over Europe whereas RFI had the largest influence over Asia.

Preliminary SMOS Salinity Measurements and Validation in the Indian Ocean

Global sea surface salinity (SSS) measurements retrieved from the European Space Agency's Soil Moisture and Ocean Salinity (SMOS) mission are the first highest resolution salinity data available from space. There are many challenges to measuring salinity from space and obtaining a targeted accuracy of 0.1 psu. Comparisons of Level 2 (L2) SMOS SSS data with the 1/12 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">°</sup> high resolution HYbrid Coordinate Ocean Model (HYCOM) simulations of SSS reveal large differences. These differences are minimized for an extent during the creation of Level 3 (L3) SMOS data through spatial and temporal averaging. Depending on the retrieval algorithm used, there are differences between ascending and descending passes with data collected during the descending pass exhibiting a bias toward lower SSS. It is challenging to process SMOS SSS data in the northern Indian Ocean due to radio frequency interference and large seasonal variability due to monsoonal circulation. Comparisons of SMOS L3 data with Argo float SSS and HYCOM SSS indicate the lowest discrepancies in SSS for these data sets occur in the southern tropical Indian Ocean and the largest differences between the compared salinity products are noticed in the Arabian Sea and Bay of Bengal with an erratic root mean square error in the latter region. Higher errors in SSS occurred in coastal areas compared to the open ocean. The accuracy of SMOS salinity measurements is increasing with the maturity of the data and new algorithms.

Validating SMOS Ocean Surface Salinity in the Atlantic With Argo and Operational Ocean Model Data

This paper provides an assessment of synoptic measurements of sea surface salinity (SSS) from the European Space Agency Soil Moisture and Ocean Salinity (SMOS) satellite. Due to the complex nature of the response of L-band signals to SSS, SMOS provides three values of SSS at each grid point from three different forward models. To meet oceanographic requirements for SSS retrieval accuracy, SMOS Level 2 SSS products are averaged over time and space. This paper reports on validation studies in the Atlantic based on monthly Level 3 products on a 1°×1° grid for September 2010. Outside coastal regions, large-scale SSS patterns from SMOS are in general agreement with climatology, Argo, and ocean model output. During September 2010, SSS from descending passes provides reasonable quantitative estimates, while SSS from ascending passes overestimates SSS by over 1 practical salinity unit (psu). The daily mean difference in SSS between ascending and descending passes varies during August-December 2010, reaching a maximum in September. Differences in SMOS SSS from the three models are an order of magnitude smaller than differences between ascending and descending passes. Gridded SMOS SSS data are compared against output from the U.K. Met Office Forecasting Ocean Assimilation Model (FOAM)-Nucleus for European Modelling of the Ocean (NEMO). Basic checks confirm that SSS from FOAM-NEMO is unbiased against Argo and that FOAM-NEMO SSS is a useful independent data source to validate and rapidly identify departures in SMOS SSS. Over the whole Atlantic, SMOS SSS variability against FOAM-NEMO is around 0.9 psu, decreasing to 0.5 psu over the subtropical North Atlantic.

Soil Salinity Impacts on L-Band Remote Sensing of Soil Moisture

The recently launched Soil Moisture and Ocean Salinity (SMOS) satellite is providing soil moisture observations at continental scales by measuring L-band microwave radiation emitted from the land surface. While its retrieval algorithms will correct for factors such as vegetation and surface roughness, it will not correct for soil salinity. This letter tests the assumption that soil salinity will have a negligible impact on L-band brightness temperature (Tb) at SMOS scales using field data; airborne Tb observations were collected in a saline groundwater discharge area near Nilpinna Station, South Australia. At the 500-m scale, the airborne observations of Tb could not be reproduced using the baseline algorithm of the SMOS Level 2 retrieval scheme, without accounting for soil salinity in the model. The analysis in this letter shows that soil moisture retrieval errors of at least 0.04 m3 m-3 (i.e., the entire SMOS error budget) will occur due to salinity alone in SMOS footprints with saline coverage as low as 25% (possibly even much less). Consequently, fractional salinity coverage cannot be considered a negligible factor by microwave soil moisture satellite missions.

A proposed extension to the soil moisture and ocean salinity level 2 algorithm for mixed forest and moderate vegetation pixels

The Soil Moisture and Ocean Salinity (SMOS) mission, launched in November 2009, provides global maps of soil moisture and ocean salinity by measuring the L-band (1.4 GHz) emission of the Earth's surface with a spatial resolution of 40–50 km. Uncertainty in the retrieval of soil moisture over large heterogeneous areas such as SMOS pixels is expected, due to the non-linearity of the relationship between soil moisture and the microwave emission. The current baseline soil moisture retrieval algorithm adopted by SMOS and implemented in the SMOS Level 2 (SMOS L2) processor partially accounts for the sub-pixel heterogeneity of the land surface, by modelling the individual contributions of different pixel fractions to the overall pixel emission. This retrieval approach is tested in this study using airborne L-band data over an area the size of a SMOS pixel characterised by a mix Eucalypt forest and moderate vegetation types (grassland and crops), with the objective of assessing its ability to correct for the soil moisture retrieval error induced by the land surface heterogeneity. A preliminary analysis using a traditional uniform pixel retrieval approach shows that the sub-pixel heterogeneity of land cover type causes significant errors in soil moisture retrieval (7.7%v/v RMSE, 2%v/v bias) in pixels characterised by a significant amount of forest (40–60%). Although the retrieval approach adopted by SMOS partially reduces this error, it is affected by errors beyond the SMOS target accuracy, presenting in particular a strong dry bias when a fraction of the pixel is occupied by forest (4.1%v/v RMSE, −3.1%v/v bias). An extension to the SMOS approach is proposed that accounts for the heterogeneity of vegetation optical depth within the SMOS pixel. The proposed approach is shown to significantly reduce the error in retrieved soil moisture (2.8%v/v RMSE, −0.3%v/v bias) in pixels characterised by a critical amount of forest (40–60%), at the limited cost of only a crude estimate of the optical depth of the forested area (better than 35% uncertainty). This study makes use of an unprecedented data set of airborne L-band observations and ground supporting data from the National Airborne Field Experiment 2005 (NAFE'05), which allowed accurate characterisation of the land surface heterogeneity over an area equivalent in size to a SMOS pixel.

The SMOS L3 Mapping Algorithm for Sea Surface Salinity

The Soil Moisture and Ocean Salinity (SMOS) mission launched in November 2009 will provide, for the first time, satellite observations of sea surface salinity (SSS). At level 3 (L3) of the SMOS processing chain, the large amount of SSS data obtained by the satellite will be summarized in gridded products with the aim of synthesizing the information and reducing the error of individual SSS observations. In this paper, we present the algorithm adopted by the CP34 SMOS processing center to generate the SMOS L3 products and discuss the choices adopted. The algorithm is based on optimal statistical interpolation. This method needs the following: 1) the prescription of a background field; 2) a prefiltering procedure to reduce the data set size; 3) the definition of a suitable correlation model; and 4) the characterization of the observational error statistics. For the present initial stage, a monthly climatology is chosen as the best background field. The spatiotemporal correlations between the departures from the climatology are described using a bivariate Gaussian function. The correlation model parameters are obtained by fitting the function to the realistic ocean model data. The sensitivity experiments show that an accurate correlation model that permits local variations in the correlation parameters is the best option. The observational error statistics (bias, variance, and correlation) are addressed from the results of the SMOS level-2 processor simulator. Finally, several sensitivity experiments show that a bad prescription of observational errors in the L3 algorithm does result in a dramatic impact on the generation of L3 products.

Sea surface salinity retrievals from HUT-2D L-band radiometric measurements

The interest of the scientific community in global climate has been constantly increasing in the last years. Much effort has been devoted to better understand the water cycle and its role in global climate regulation. This is one of the objectives of the European Space Agency (ESA) Soil Moisture and Ocean Salinity (SMOS) mission, approved in May 1999 and successfully launched in November 2nd 2009. Collecting brightness temperature measurements by means of a new type of instrument, a synthetic aperture radiometer operating at L-Band (MIRAS: Microwave Imaging Radiometer by Aperture Synthesis), the SMOS mission will provide regular and global maps of sea surface salinity ( SSS) and soil moisture ( SM), two key parameters to describe the water cycle. Synthetic aperture brightness temperatures have been simulated since the early 90s, during the MIRAS technological studies, and both SSS and SM retrievals have been tested with simulated data first, and later with real data to assess and improve the instrument performance. Nevertheless, except for the processing of the data collected by the SMOSillo (MIRAS Demonstrator) on June 20th, 2006, Duffo et al. (2007) and Camps et al. (2008b), these outcomes have never been validated using sea surface brightness temperatures coming from a real synthetic aperture radiometer. The aim of this study is thus to test some of the techniques proposed in previous years to improve the SSS retrieval, in particular only Level 2 techniques (i.e. converting calibrated and geo-located brightness temperature into SSS maps) will be investigated. To do so, brightness temperatures resulting from the SMOS Salinity Demonstrator Campaign held in August 2007 will be used. In that campaign the Helsinki University of Technology-2 Dimensional (HUT-2D) radiometer flown over both over land and sea. The part of the campaign conducted over the sea consisted of two series of flights over a very fresh water plume characterized by a strong SSS gradient (from 0 to 4 psu) in the Gulf of Finland. In-situ auxiliary data was collected simultaneously with the radiometer measurements. The positive outcomes in these very challenging conditions (due to the very low brightness temperature sensitivity to SSS, the lack of accurate models of the sea water dielectric constant at low SSS (Klein & Swift (1977)), and the weak radiometric sensitivity of the HUT-2D radiometer) demonstrate the importance of data pre- and post-processing to improve the results. Removing both brightness temperature biases and salinity retrieval biases and further averaging of the results, permits estimating SSS with an rms error on the order of 1 psu, which is comparable to the SMOS Level 2 expected accuracy.

Accuracy of SMOS Level 3 SSS Products Related to Observational Errors

The Soil Moisture and Ocean Salinity (SMOS) mission will provide, for the first time, satellite observations of sea surface salinity (SSS). The satellite will acquire a large amount of data but with a high observational noise. At level 3 (L3) of the SMOS processing chain, the information will be summarized in gridded products with the aim of synthesizing the information and reducing the error of individual SSS observations. The technique chosen to generate the maps is optimal statistical interpolation (OI). The goal of this paper is to quantify the impact of the observational error on the accuracy of L3 gridded products. The accuracy of the products is estimated using the OI error formulation, which has been extended to include the convolution with a normal error filter. For a given observational error, we estimate the minimum scales that can be resolved with a prescribed accuracy (at the expense of losing the variance associated with shorter scales). Conversely, for a prescribed accuracy and spatio-temporal resolution of L3 products, we estimate the maximum observational error that will allow the fulfillment of the requirements. Results indicate that a maximum SSS error of about 0.8 (1.1) psu would be enough to obtain an accuracy of 0.1 psu for L3 products with a resolution of 100 km/30 day (200 km/10 day). The statistical errors produced by the OI formulation are compared with the errors obtained for several case studies in order to assess their robustness.

Earth-Viewing L-Band Radiometer Sensing of Sea Surface Scattered Celestial Sky Radiation—Part II: Application to SMOS

We examine how the rough sea surface scattering of L-band celestial sky radiation might affect the measurements of the future European Space Agency Soil Moisture and Ocean Salinity (SMOS) mission. For this purpose, we combined data from several surveys to build a comprehensive all-sky L-band celestial sky brightness temperature map for the SMOS mission that includes the continuum radiation and the hydrogen line emission rescaled for the SMOS bandwidth. We also constructed a separate map of strong and very localized sources that may exhibit L-band brightness temperatures exceeding 1000 K. Scattering by the roughened ocean surface of radiation from even the strongest localized sources is found to reduce the contributions from these localized strong sources to negligible levels, and rough surface scattering solutions may be obtained with a map much coarser than the original continuum maps. In rough ocean surface conditions, the contribution of the scattered celestial noise to the reconstructed brightness temperatures is not significantly modified by the synthetic antenna weighting function, which makes integration over the synthetic beam unnecessary. The contamination of the reconstructed brightness temperatures by celestial noise exhibits a strong annual cycle with the largest contamination occurring in the descending swaths in September and October, when the specular projection of the field of view is aligned with the Galactic equator. Ocean surface roughness may alter the contamination by over 0.1 K in 30% of the SMOS measurements. Given this potentially large impact of surface roughness, an operational method is proposed to account for it in the SMOS level 2 sea surface salinity algorithm.

Calibration of the L-MEB Model Over a Coniferous and a Deciduous Forest

In this paper, the L-band Microwave Emission of the Biosphere (L-MEB) model used in the Soil Moisture and Ocean Salinity (SMOS) Level 2 Soil Moisture algorithm is calibrated using L-band (1.4 GHz) microwave measurements over a coniferous (pine) and a deciduous (mixed/beech) forest. This resulted in working values of the main canopy parameters optical depth (tau), single scattering albedo (omega), and structural parameters tt(H) and tt(V), besides the soil roughness parameters H R and N R. Using these calibrated values in the forward model resulted in a root mean-square error in brightness temperatures from 2.8 to 3.8 K, depending on data set and polarization. Furthermore, the relationship between canopy optical depth and leaf area index is investigated for the deciduous site. Finally, a sensitivity study is conducted for the focus parameters, temperature, soil moisture, and precipitation. The results found in this paper will be integrated in the operational SMOS Level 2 Soil Moisture algorithm and used in future inversions of the L-MEB model, for soil moisture retrievals over heterogeneous, partly forested areas.

L-band Microwave Emission of the Biosphere (L-MEB) Model: Description and calibration against experimental data sets over crop fields

In the near future, the SMOS (Soil Moisture and Ocean Salinity) mission will provide global maps of surface soil moisture (SM). The SMOS baseline payload is an L-band (1.4 GHz) two dimensional interferometric microwave radiometer which will provide multi-angular and dual-polarization observations. In the framework of the ground segment activities for the SMOS mission an operational SMOS Level 2 Soil Moisture algorithm was developed. The principle of the algorithm is to exploit multi-angular data in order to retrieve simultaneously several surface parameters including soil moisture and vegetation characteristics. The algorithm uses an iterative approach, minimizing a cost function computed from the differences between measured and modelled brightness temperature ( T B) data, for all available incidence angles. In the algorithm, the selected forward model is the so-called L-MEB (L-band Microwave Emission of the Biosphere) model which was the result of an extensive review of the current knowledge of the microwave emission of various land covers. This model is a key element in the SMOS L2 algorithm and could be used in future assimilation studies. There is thus a strong need for a reference study, describing the model and its implementation. In order to address these needs a detailed description of soil and vegetation modelling in L-MEB is given in this study. In a second step, the use of L-MEB in soil moisture retrievals is evaluated for several experimental data sets over agricultural crops. Calibrations of the soil and vegetation L-MEB parameters are investigated for corn, soybean and wheat. Over the different experiments, very consistent results are obtained for each vegetation type in terms of calibration and soil moisture retrievals.

Performance of sea surface salinity and soil moisture retrieval algorithms with different auxiliary datasets in 2-D L-band aperture synthesis interferometric radiometers

The Soil Moisture and Ocean Salinity (SMOS) Earth Explorer Opportunity Mission was selected in May 1999 by the European Space Agency Earth Observation Programme Board to provide global and frequent soil moisture (SM) and sea surface salinity (SSS) maps. SMOS' single payload is the Microwave Imaging Radiometer by Aperture Synthesis (MIRAS) sensor, an L-band two-dimensional aperture synthesis interferometric radiometer with multiangular and polarimetric imaging capabilities. The definition of the SMOS Level 2 Processor requires the selection of the optimum operation mode (dual-polarization or full-polarimetric) for each application, the specification of the required auxiliary data, and the optimum retrieval algorithms. Using the SMOS simulator and based on the experience gained in previous works, this paper presents a study of the SM and SSS retrieval capabilities over homogeneous pixels, in the two modes of operation with different auxiliary data. It is found that SSS retrievals using the first Stokes parameter measured in the dual-polarization mode perform somewhat worse than using the vertical (T/sub vv/) and horizontal (T/sub hh/) brightness temperatures measured in the full-polarimetric mode, and the performance degrades for cold waters due to the lower sensitivity of the brightness temperature to SSS at low sea surface temperature (SST). Due to the larger angular variation of T/sub hh/ and T/sub vv/, SM retrievals using T/sub hh/ and T/sub vv/ measured in the full-polarimetric mode exhibit a significant better performance over bare soils than over vegetation-covered soils. Over vegetation-covered soils vegetation parameters (opacity and albedo) can be inferred over a 550-km swath width in the full-polarimetric mode. However, since the first Stokes parameter is independent of both geometric and Faraday rotations, it is very robust in the presence of instrumental and geophysical errors. In the SSS retrieval problem and in the SM retrieval problem (with T/sub hh/ and T/sub vv/ measured in the full-polarimetric mode), the performance of the retrieval algorithms tested is not significantly altered if the model parameters are not exactly known, but are left as adjustable parameters in the optimization process.