Soft Tissue Thickness Research Articles

Poster 324: Complications following Quadriceps Tendon Anterior Cruciate Ligament Reconstruction in Pediatric Patients: A Case Series

Objectives: The purpose of this study was to analyze the rate and type of complications and subsequent procedures encountered with soft tissue quadriceps tendon autograft (QTA) for anterior cruciate ligament reconstruction (ACLR) in pediatric patients ≤ 18 years old. Methods: After institutional review board approval, operative records of all pediatric patients ≤ 18 years old who underwent ACLR from June 2015 to December 2021 were retrospectively reviewed. A consecutive series of patients who underwent ACLR with a QTA with minimum 6 month-follow up were included in the study. Skeletally immature patients underwent an all-epiphyseal (AE) technique while patients nearing skeletal maturity or that were skeletally mature underwent a complete transphyseal (CT) procedure. All patients underwent ACLR by utilizing a full thickness soft tissue QTA without a bone plug. Additionally, patients who were determined to be at high risk of re-tear underwent a concomitant a lateral extra-articular tenodesis (LET) with a modified Lemaire technique. Preoperative demographic information, surgical details, associated diagnosis, and subsequent injuries and complications were collected. Complications associated with the quadriceps tendon harvest site and use of QTA including removal of non-absorbable sutures from the autograft donor site, quadriceps tendon rupture, and the subsequent development of a superior patellar osteochondritis dissecans lesions (OCD) were reported. Results: A total of 143 pediatric patients ≤ 18 years old underwent an ACLR with a soft tissue QTA during the study period. Of the 143 eligible patients, 137 patients had minimum 6-month follow-up and were included in the study. After 3 attempted contacts, six patients (4%) were deemed lost to follow-up and excluded from the study. The mean age was 14.8±1.6 (range 11-18 years) and 60% were male. The average follow-up time was of 2.0 ± 1.1 years (range 0.5-4.9 years). Of the 137 patients included in the study, 11 (8%) had a subsequent complication associated with the use a of a QTA. Baseline demographic characteristics of this cohort are summarized in (Table 1). Of the 11 patients with QTA related complications, 8 (6%) had a subsequent procedure to remove non- absorbable sutures used for the donor site closure. When we first began to perform QTA ACLR, non- absorbable sutures were used to close the donor site defect. We encountered a subset of patients that developed persistent donor site irritation and pain associated to the use of such sutures, and consequently changed our technique to use absorbable sutures. Interestingly, 2 (1%) patients developed OCD-like lesions in the superior aspect of the patella 1.2 ± 0.8 years on average following surgery (Fig 1). We speculate that the QTA harvest could have compromised the vasculature of the patella, thus resulting in the development of OCD and subsequent chondromalacia. Finally, 2 (1%) patients had quadriceps tendon ruptures following QTA ACLR. The first patient aged 16, slipped and fell onto a hyperflexed left knee 6 weeks after QTA ACLR and sustained a small boney avulsion injury of the superior pole of the patella. During repair, cultures were taken, and rare Staphylococcus aureus were identified. The patient was placed on Keflex for 4 weeks, however 2 weeks after finishing treatment they presented with sudden limited range of motion, increased pain, and a yellow appearing scab. An ultrasound guided aspirated was positive for Staphylococcus aureus, and the patient subsequently underwent an infection and debridement procedure. The second patient, aged 14, sustained a non-contact injury while playing football 7 months post- operatively prior to being cleared to return to sports. They sustained a complete tear of the distal quadriceps tendon, adjacent to the donor site. Of note, 1 patient underwent a concomitant removal of non-absorbable sutures and patellar chondromalacia debridement and is thus represented twice. In addition, 5 (4%) patients had a graft failure and underwent subsequent revision ACLR, 6 (4%) had a second meniscus related surgery, 8 (6%) had a subsequent lysis of adhesions procedure and 13 (9%) underwent ACLR for injuries sustained on the contralateral knee. Conclusions: In this study, we report complications encountered with soft tissue QTA for ACLR. The complication rate for quadriceps tendon graft harvest was 8%. However, given that the removal of non- absorbable sutures from the donor site was caused by the surgical technique used, the revised complication rate for quadriceps tendon graft harvest was 3%. To the authors’ knowledge, this is the first study to raise the suspicion that quadriceps tendon graft harvest could lead to the development of super patellar OCD as this occurred in two patients from this cohort. Although the use of a QTA has recently gained popularity due to its high return to sports and low graft failure rate, surgeons must be aware of the complications and risk associated with quadriceps tendon graft harvest. [Table: see text]

Do facial soft tissue thicknesses change after surgeries correcting dental malocclusions? An intra- and inter-patient statistical analysis on soft-tissue thicknesses in BSSO + LFI surgeries.

The aim of this study was to analyse changes in facial soft tissue thickness (FSTT) after corrective surgeries for dental malocclusion. The correlation between body mass index (BMI) and sex of patients and their FSTT before undergoing surgery was analysed. Cone beam computed tomography of seventeen patients that underwent Le Fort I osteotomy in combination with bilateral sagittal split osteotomy were collected. Hard and soft tissue landmarks were selected basing on the interventions. FSTT were computed, and measurements from pre- to post-operative were compared. The relationship between FSTT, sex, and BMI was investigated. Considering the comparison between pre- and post-operative measurements, any significant difference emerged (p > .05). The Pearson's correlation coefficient computed between BMI and the FSTT (pre-operative) showed a correlation in normal-weight patients; the region-specific analysis highlighted a stronger correlation for specific landmarks. Higher median values emerged for women than for men; the subset-based analysis showed that women presented higher values in the malar region, while men presented higher values in the nasal region. The considered surgeries did not affect the FSTT of the patients; differences related to BMI and sex were found. A collection of FSTT mean values was provided for twenty landmarks of pre- and post-operative of female and male subjects. This exploratory analysis gave insights on the behaviour of STT after maxillofacial surgeries that can be applied in the development of predictive methodologies for soft tissue displacements and to study modifications in the facial aspect of the patients.

A computerized facial approximation method for Homo sapiens based on facial soft tissue thickness depths and geometric morphometrics.

Facial approximation (FA) provides a promising means of generating the possible facial appearance of a deceased person. It facilitates exploration of the evolutionary forces driving anatomical changes in ancestral humans and can capture public attention. Despite the recent progress made toward improving the performance of FA methods, a limited understanding of detailed quantitative craniofacial relationships between facial bone and soft tissue morphology may hinder their accuracy, and hence subjective experience and artistic interpretation are required. In this study, we explored craniofacial relationships among human populations based upon average facial soft tissue thickness depths (FSTDs) and covariations between hard and soft tissues of the nose and mouth using geometric morphometrics. Furthermore, we proposed a computerized method to assign the learned craniofacial relationships to generate a probable facial appearance of Homo sapiens, reducing human intervention. A smaller resemblance comparison (an average Procrustes distance was 0.0258 and an average Euclidean distance was 1.79 mm) between approximated and actual faces and a greater recognition rate (91.67%) tested by a face pool indicated that average dense FSTDs contributed to raising the accuracy of approximated faces. Results of partial least squares (PLS) analysis showed that nasal and oral hard tissues have an effect on their soft tissues separately. However, relatively weaker RV correlations (<0.4) and greater approximation errors suggested that we need to be cautious about the accuracy of the approximated nose and mouth soft tissue shapes from bony structures. Overall, the proposed method can facilitate investigations of craniofacial relationships and potentially improve the reliability of the approximated faces for use in numerous applications in forensic science, archaeology, and anthropology.

Maxillary labial peri-implant hard and soft tissue alteration observed on cross-sectional dimension: a 2-year prospective observational study

ObjectivesTo evaluate how peri-implant hard and soft tissue height (BH, MH) alter after final prostheses placement related to labial hard and soft tissue thickness (BW, MW).Materials and methodsForty-five platform-switched implants were classified into four groups according to BW and MW: type 1 (thick BW and thick MW), type 2 (thick BW and thin MW), type 3 (thin BW and thick MW), type 4 (thin BW and thin MW). Tissue resorption was evaluated on cone-beam CT images taken at final prostheses placement, at 1-year follow-up, and at 2-year follow-up. Kruskal–Wallis test and post hoc Mann–Whitney test were applied; significance was set to 0.05.ResultsBH resorption was 0.13 ± 0.12 mm in type 1, 0.26 ± 0.17 mm in type 2, 0.09 ± 0.09 mm in type 3, 0.94 ± 0.19 mm in type 4. Differences between type 1 and 4, type 2 and 4, and type 3 and 4 were statistically significant (p < 0.001, p = 0.005, p < 0.001, respectively). MH resorption was 0.10 ± 0.09 mm in type 1, 0.36 ± 0.16 mm in type 2, 0.12 ± 0.12 mm in Type 3, 0.79 ± 0.23 mm in type 4. Differences between type 1 and 2, type 1 and 4, type 2 and 3, type 2 and 4 and type 3 and 4 were statistically significant (p < 0.001).ConclusionsSignificantly less BH/MH resorption occurs around implants with thick BW/MW than those with thin BW/MW in 2 years. Implants with thick peri-implant soft tissue resulted in significantly less tissue resorption in second year after final prostheses placement.

The relationship between biological parameters and facial soft tissue thickness measured by ultrasound and its forensic implications.

Facial soft tissue thickness (FSTT) data are currently widely used in forensic and medical science. In the forensic sciences, they form the basis for craniofacial reconstruction and identification methods. Since there are few FSTT data in the Slovak population, this study aims to enrich the data in well-defined age categories, taking into account differences between sexes and body mass index (BMI). The sample consisted of 127 participants aged 17 to 86 years from Slovakia. In addition to biological sex and age information, stature and body weight were recorded to calculate BMI. Subsequently, 17 facial anthropometric landmarks were used to measure FSTT using a noninvasive General Electric LOGIQe R7 ultrasound device. The mean values of FSTT were greater in the mouth region in males and in the zygomatic and eye regions in females. Differences between males and females, regardless of sex and BMI, were significant only at two landmarks. When BMI and age were taken into account, there were differences in 12 of 17 landmarks. Linear regression results showed the strongest correlation of most landmarks with BMI, followed by age and sex. When the FSTT was estimated in association with sex/age/BMI, landmarks in the zygomatic, mandibular, and frontal regions were the best regressors. The results of the present study demonstrate that B-mode ultrasound measurements of FSTT can be used in facial reconstruction as a function of BMI, age, and sex of the subject. Furthermore, the present regression equations can help practitioners in the forensic/medical field to calculate individual tissue thickness.

The feasibility of ultrasonography for the measurement of periodontal and peri-implant phenotype: A systematic review and meta-analysis.

Screening ultrasonography was proposed for monitoring periodontal soft tissues in the early 1960s, owing to its nonionizing, real-time, and cost-effective properties. Studies have provided convincing preliminary evidence for the use of ultrasound (US) in implant dentistry. To assess the feasibility of ultrasonography (US) for measuring the buccal thickness of periodontal and peri-implant tissues. The secondary objective was to evaluate the reliability of US measurements compared to classic techniques, such as CBCT and directly measurements. An electronic literature search was conducted by three independent reviewers through February 2023. The inclusion criteria were articles investigating at least five patients/cadavers with US measurements in periodontal or peri-implant buccal tissues. Compliance with methodological reporting standards and risk of bias was assessed using EULAR and QUADAS-C tools, respectively. Random-effects meta-analysis was conducted, using Bland-Altman analysis. Certainty of the evidence was assessed using GRADE. The final selection included 12 studies examining 458 patients and 13 cadavers, with a total of 226 implants, 1958 teeth and 60 edentulous sites. The body of evidence was assessed as partially compliant with methodological reporting standards for US studies and had an unclear to high risk of bias. Meta-analysis of five comparative studies showed no evidence of clinically significant bias between US and direct measurements (very low certainty), and between US and CBCT (very low certainty) for soft-tissue thickness. Likewise, for bone thickness, there is no evidence of clinically significant bias between US and CBCT (low certainty). Compared to the CBCT and direct measurements, ultrasonography might be a reliable approach for monitoring on periodontal and peri-implant phenotype. However, there is uncertainty about estimates of the actual effect, so further standardized and larger sample size of clinical research is needed.

Evaluation of soft tissue chin thickness and lip thickness in different mandibular divergence patterns in Maratwada population-A cephalometric study

To evaluate the soft tissue chin thickness using different points on lateral cephalogram. To evaluate the lip thickness using different points on lateral cephalogram. To find correlation between soft tissue thickness and lip thickness in different mandibular divergence patterns.: The sample size consisted of 120 lateral cephalogram of subjects who had not undergone orthodontic treatment. Lateral cephalogram of 120 subjects was divided under 3 groups based on mandibular divergence into low angle, medium angle and high angle cases. The changes observed in three groups were assessed using the ANOVA test and Posthoc Bonferroni test.120 samples were collected according to the inclusion and exclusion criteria and cephalometric analysis was done. The correlation of the Mandibular Divergence and the soft tissue upper lip thicknessis statistically significant with a test value of 3.378 and a p value of 0.037. The correlation of the Mandibular Divergence and the soft tissue lower lip thickness is not statistically significant. The correlation of Mandibular divergence and soft tissue chin thickness at anterior part pog-pog is not statistically significant. The correlation of Mandibular divergence and soft tissue chin thickness at Angle of the chin Gn-Gn is statistically significant. The correlation of Mandibular divergence and soft tissue chin thickness at Inferior part Me-Me is not statistically significant.Soft tissue chin thickness was not uniform at all levels of chin.

Determination of Palatal Soft Tissue Thickness and Safe Zone for Palatal Soft Tissue Harvest Using CBCT: A Retrospective Study.

Our decision to conduct this study was motivated by the dearth of knowledge on geographical variations in the thickness of the palatal masticatory mucosa. The aim of the present study is to comprehensively analyze the palatal mucosal thickness and indicate the safety zone for palatal soft tissue harvesting using cone beam computed tomography (CBCT). Material and Methods. As this was a retrospective analysis of cases previously reported to the hospital, written consent was not acquired. The analysis was carried out on 30 CBCT images. Two examiners evaluated the images separately to avoid bias. Measurements were done from the midportion of the cementoenamel junction (CEJ) to the midpalatal suture in a horizontal line. Measurements were recorded from the maxillary canine, first premolar, second premolar, first molar, and second molar and were marked in axial and coronal sections at distances of 3, 6, and 9 mm from the CEJ. The relationship between palate soft tissue thickness in relation to each tooth, palatal vault angle, teeth, and the greater palatine grove was evaluated. Differences in the palatal mucosal thickness according to age, gender, and tooth site were evaluated. Categorical data were presented as frequencies and percentages. Numerical data are presented as mean and standard deviation values. They are explored for normality using Shapiro-Wilk's test. Data are normally distributed and are analyzed using one-way ANOVA followed by Tukey's post hoc test for independent variables and paired t-test for repeated measures. The significance level is set at p ≤ 0.05 for all tests. Statistical analysis is performed with R statistical analysis software version 4.1.3 for Windows. For sex and nationality, there was no significant association (p > 0.05), while for age, cases 35 years and older had significantly higher mucosal thickness than cases younger than 35 years old (p < 0.001). For all teeth, the association was statistically significant (p < 0.001). For the canine and first premolar, cases with deep angles had significantly higher mean values than those with moderate angles (p < 0.001). For other teeth, cases with deep angles had significantly higher mean values than other angles (p < 0.001). Palatal mucosal thickness varied significantly from the canine to the second molar; the most appropriate site for graft harvesting is the canine to second premolar area which is 9-12 mm from the midpalatal suture aspect and is considered a safe zone for harvesting palatal graft.

Radiographic marginal bone level evaluation around two different tissue-level implant systems: a one-year prospective study.

Marginal bone loss, is a frequently reported variable in the evaluation of dental implants. The primary objective of this study was to evaluate radiographic marginal bone level changes around the two different tissue-level implant systems placed adjacently in the posterior maxilla or mandible. The influence of implant macro-geometry and vertical soft tissue thickness on marginal bone loss were also evaluated. Seven patients were included in the study and a total of 18 implants were analyzed. Each patient received two different implants placed adjacently in the maxilla or the mandible. The implants used in our study were either Straumann® SP cylindrical implants or JD Octa® tapered implants. During the surgery, vertical soft-tissue thickness was measured with a periodontal probe placed on the top of the bony crest and in the center of the future implant site. Healing abutments were then seated. Three months following implant placement, impressions were taken, and screw-retained metal ceramic prostheses were delivered. Standardized intraoral radiographs were taken immediately after implant placement and one year following implant loading in order to assess marginal bone level changes. Results showed a mean marginal bone loss of 0.55±0.5 mm for Straumann® SP implants and 0.39±0.49 mm for JD Octa® implants after one year of loading and the difference was not statistically significant between the two systems. A statistically significant correlation was found between soft tissue thickness and marginal bone loss; in sites with thin mucosal tissues (≤2 mm), there was significantly greater bone loss compared to sites with thick, soft tissues (> 2 mm) in both implants. Radiographic marginal bone loss was not statistically different between the two implant systems at the one-year examination period. Moreover, vertical soft tissue thickness influenced marginal bone loss regardless of the implant system used.

Determination of fetal weight by ultrasonographic evaluation of fetal mid-thigh soft-tissue thickness in late third trimester

Background: Estimation of fetal weight is of utmost importance in the planning and management of uneventful labor. This study was done to compare the estimated fetal weight determined by Hadlock’s method and Scioscia’s formula (using femur length and mid-thigh soft-tissue thickness [MTSTT]) to the actual birth weight (ABW). Aims and Objectives: The objectives of this study were as follows: (1) To estimate fetal weight by Hadlock’s method and ultrasonographic evaluation of fetal MTSTT in late third trimester. (2) To correlate fetal weight derived by Hadlock’s method and ultrasonographic evaluation of fetal MTSTT with ABW. Materials and Methods: The study was conducted during the period November 2022–January 2023, at Sri Devaraj Urs Medical College, Tamaka, Kolar. Seventy-six pregnant ladies at term (between 37 and 40 weeks) were included in the study. Results: This study assessed validity of Hadlock formulae and Scioscia’s formulae for detecting fetal weight. For detection of fetal weight by Hadlock’s method, area under curve (AUC) was 0.961 and according to Scioscia’s formulae, AUC was 0.965. This study showed good agreement between fetal weight derived by Hadlock formulae and actual fetal weight (Kappa value – 0.725). There was also good agreement between fetal weight derived by Scioscia’s formulae and actual fetal weight (Kappa value – 0.745). Conclusion: The fetal weight derived by Scioscia’s formula was comparable to the actual fetal weight allowing us to rely on Scioscia’s formulae to detect fetal weight. Calculating fetal weight by measurement of fetal MTSTT serves as an additional tool for estimation of fetal weight along with the existing parameters, thereby increasing the likelihood for accurate fetal weight estimation.

Lateral Cephalometric Analysis of Nasal Morphology in Patients Visiting Nishtar Institute of Dentistry

Nasal morphology is the keystone of facial aesthetics. Being the most prominent part of the face, the shape and position of the nose greatly influence the facial profile and nasal soft tissue thickness also plays a vital role in orthodontic diagnosis and treatment planning. Objective: To evaluate the soft tissue nasal morphology in individuals presenting with different skeletal patterns such as skeletal class 1 and skeletal class 2 jaw relationship. Methods: It was Comparative Cross-sectional study conducted in Orthodontics Department of Nishtar Institute of Dentistry for the period of six months (5th Mar 2020 to 6th Jun 2021). Study sample consisted of Lateral cephalometric radiographs of 65 subjects. Age range of sampled subjects was 19-26 years (mean age 20.93). The sample was divided into two groups on basis of the Skeletal jaw relationship as class-1 and class-2. An Independent t-test was applied for evaluation of the difference in lateral nasal morphology between both groups. Results: Notable differences were found between skeletal class 1 and skeletal class 2 groups for the prominence of the mandible and Linear distance between soft tissue Pogonion and Pronasale. Considerable differences in measurements of nasal depth, nasofrontal angle, nasal tip projection angle, nasofacial angle and nasomental angle were found. Conclusions: It is concluded that nasal morphology was greatly influenced by not only the underlying skeletal jaw relationship yet other factors e.g., dentition along with soft tissue thickness were also responsible for nasal morphology differences among various skeletal patterns. Gender dimorphism also exists for various nasal features.

Hard and soft tissue healing around teeth prepared with the biologically oriented preparation technique and restored with provisional crowns: An in vivo experimental investigation.

To evaluate the hard and soft tissues healing around teeth prepared with the biologically oriented preparation technique (BOPT) versus the chamfer technique versus non-prepared teeth. Thirty-two teeth in eight beagle dogs were randomly prepared with the BOPT (test = 16) or chamfer (control = 16) techniques and covered with polymethylmethacrylate crowns as provisional restorations. Sixteen negative controls (non-prepared teeth) were also used for comparison. Histological description and histomorphometrical measurements of the periodontal tissues were collected at 4 and 12 weeks in 7 out of 8 dogs, including the soft tissue height and thickness, and the horizontal and vertical bone dimensions. When compared with negative controls, test and control preparation techniques exhibited a more apical location of the free gingival margin with respect to the cement-enamel junction (∆ = 1.1 mm for both groups at 4 weeks (p < .05), 0.99 mm for the test group (p = .043) and 0.20 mm for control group (p = 1.000) at 12 weeks). There were no significant differences between test and control groups with respect to vertical and horizontal histometric measurements. The BOPT and chamfer tooth preparation protocols induced similar qualitative and quantitative changes in the healing of the supra-crestal soft tissue complex, when compared with non-prepared teeth. Despite the limited amount of power, it appeared that differences between the tested preparation techniques were not statistically significant.

Longitudinal Study to Assess the Reliability and Predictive Validity of Ultrasound Measurements in Tracking Fetal Growth and Development Throughout Pregnancy

The utilization of ultrasound in obstetrics is extremely common due to its accurate fetal imaging capabilities. By early identifying anomalies such intrauterine growth restrictions and macrosomia, ultrasonography scanning during pregnancy primarily aims to reduce the risk of obstetric problems. Fetal weight is currently estimated using morphometric formulas. They employ fundamental biometric variables. Hadlock's formula, which is used for estimation of fetal weight, has 20 percent error rate, though. Due to this particular cause, the researchers from all around world had already searching for the additional sonographic characteristics having a stronger predictive value that correlate with fetal weight. According to recent scientific studies, assessing fetal weight can benefit from using novel parameters of sonograph such measurements of the thickness of soft tissue. The fetus's body can be measured in a number of locations, including upper arm, the thigh, abdomen, and the subscapular region. Diverse measurements have varying degrees of connection with some other anthropometric &amp; sonographic factors, including body mass &amp; gestational age. Numerous research using novel formulas for calculating fetal weight have been produced in response to the reports. For measuring fetal weight, measurements other than those including soft tissue, including such those lean and adipose tissue or utilising 3D ultrasonography are acquired. For the purpose of sonographic pregnancy assessment, ultrasound examination of the thicknesses of subcutaneous tissue in the several body regions might evidence to become reliable indicator of the fetal weight. Keywords: Pregnancy, postpartum hypoglycaemia, foetus, Intra-uterine, pregnancy ultrasound

A prospective case series on the efficacy of a cross-linked collagen matrix to increase buccal soft tissue thickness at large edentulous gaps: One-year results.

The objective of this study is to assess profilometric changes following soft tissue augmentation with a cross-linked porcine-derived collagen matrix (CMX) at large edentulous gaps of at least two units. Systemically healthy, nonsmoking patients with a large edentulous gap of at least two units demonstrating a horizontal soft tissue defect, were enrolled in a prospective case series. Soft tissue augmentation was performed in a one-stage approach with a 6 mm thick CMX at the time of implant placement. The primary outcome was the change in buccal soft tissue profile (BSP) at a mesial, central, and distal area of interest (AOI) up to 1 year when compared to the preoperative situation based on superimposed digital surface models. Secondary outcomes included the horizontal dimension of the soft tissue defect, complications, and marginal bone loss (MBL). Fifteen patients (eight females; mean age 58.73 years) were enrolled and 13 could be re-assessed at 1-year follow-up. The mean linear increase in BSP at 1 year was 0.66 mm (98.3% CI: 0.37-0.94), 0.80 mm (98.3% CI: 0.39-1.22), and 0.69 mm (98.3% CI: 0.32-1.06) at the mesial, central, and distal AOI, respectively. Substantial shrinkage of about 75% was observed in all areas between augmentation and 1-year follow-up. Even though 11 of 13 sites were fully augmented immediately postoperative, a soft tissue defect recurred in all sites at 1-year follow-up with a mean deficit of 2.30 mm. Altogether, 25% of the original soft tissue defect was eliminated by soft tissue augmentation. CMX was safe since no postoperative complications occurred and MBL was limited (0.70 mm). CMX is efficacious for horizontal soft tissue augmentation at large edentulous gaps. However, considerable graft resorption may be expected, and the clinical relevance of the augmentation may be questionable since all patients demonstrated a recurring and considerable soft tissue defect 1 year after surgery.

575 Single-stage Trilaminar Skin Reconstruction Following Full-Thickness Burn Injury

Abstract Introduction Complex burns are highly morbid injuries that can cause severe disfigurement and can be devastating to one’s quality of life and psychosocial well-being. Currently, there are no simple, single-stage procedures available for extensive or multifocal burns to address full-thickness trilaminar defects. Our team has previously demonstrated the viability of an adipose-first reconstruction to address hypodermal defects. In this study, we demonstrate the efficacy of a combined adipose plus finely minced skin to achieve a single-stage trilaminar skin reconstruction. Methods Full-thickness burns were created on female Yorkshire swine. After 48-hours, escharectomies were performed to the level of fascia. The wounds were layered with adipose harvested from female Yorkshire swine. In one group, autologous split-thickness skin grafts were cut into pixel size (0.3x0.3 mm) grafts and layered on top of the adipose. Pigs were maintained for 4-weeks with weekly photography, ultrasound, followed by endpoint histology and tension measurements. Results At the end of the 4-week period, adipose combined with pixel graft demonstrated improved epithelialization and less contracture (p&amp;lt; 0.01). Thickness and mobility measurements were consistent in both groups. This findings were similar to our previous approaches using adipose following surgical debridement. Tissue pliability in the pixel grafting group was maintained to a high degree. Cross sections were performed which showed the persistence of fat graft at the base of the wounds. Conclusions Immediate, single-stage trilaminar reconstruction of full-thickness complex burns reduces contracture, mitigates adhesion, and restores normal soft-tissue thickness, therefore, presenting a paradigm changing approach in the current practice of burn injuries to the mobile surfaces. Applicability of Research to Practice Our results support the therapeutic potential of adipose-based soft-tissue reconstruction of burns to both enhance hypodermal augmentation and mitigate fibrotic complications including contracture and adhesions. Our data suggest that this approach is compatible with the standard of care skin grafting, and in fact provides improved epidermal thickness and pliability.

Facial Soft Tissue Thickness Values for Romanian Adult Population

Introduction: Forensic identification practice requires a multitude of methods for positive identification, among which the facial reconstruction occupies a high place. For this to be done in the best way possible, it is mandatory that each population have their own database regarding soft tissue thickness. Objective: The present research is focused on creating such a database for the Romanian adult population and on exploring the statistical distribution and correlation of craniometric landmarks, overall, and in groups defined according to sex and weight categories. This might provide support in estimating the values of missing landmarks or other variables (e.g., age, sex) for unidentified bodies. Methods: Twelve craniometric landmarks were measured on 100 cadavers less than 24 h after death. Results and discussions: Of the 12 anatomical landmarks, only one appears to manifest statistically significant differences between sexes, and seven landmarks appear to vary significantly among the weight categories. Additionally, some evidence of interpopulation differences in the average soft tissue thicknesses were observed by the comparison of these data with similar studies from Caucasian groups with different geographic origin. Additionally, correlations between facial landmarks were examined, overall and between sexes.

Accurate gingival segmentation from 3D images with artificial intelligence: an animal pilot study

BackgroundGingival phenotype plays an important role in dental diagnosis and treatment planning. Traditionally, determining the gingival phenotype is done by manual probing of the gingival soft tissues, an invasive and time-consuming procedure. This study aims to evaluate the feasibility and accuracy of an alternatively novel, non-invasive technology based on the precise 3-dimension (3D) soft tissue reconstruction from intraoral scanning and cone beam computed tomography (CBCT) to predict the gingival biotype.MethodsAs a proof-of-concept, Yorkshire pig mandibles were scanned, and the CBCT data were fed into a deep-learning model to reconstruct the teeth and surrounding bone structure in 3D. By overlaying the CBCT scan with the intraoral scans, an accurate superposition was created and used for virtual measurements of the soft tissue thickness. Meanwhile, gingival thicknesses were also measured by a periodontal probe and digital caliper on the buccal and lingual sides at 3 mm apical to the gingival margin of the posterior teeth and compared with the virtual assessment at the same location. The data obtained from virtual and clinical measurements were compared by Wilcoxon matched-pairs signed-rank analysis, while their correlation was determined by Pearson’s r value. The Mann–Whitney U test was used for intergroup comparisons of the amount of difference.ResultsAmong 108 investigated locations, the clinical and virtual measurements are strongly positively correlated (r = 0.9656, P < 0.0001), and only clinically insignificant differences (0.066 ± 0.223 mm) were observed between the two assessments. There is no difference in the agreement between the virtual and clinical measurements on sexually matured samples (0.087 ± 0.240 mm) and pre-pubertal samples (0.033 ± 0.195 mm). Noticeably, there is a greater agreement between the virtual and clinical measurements at the buccal sites (0.019 ± 0.233 mm) than at the lingual sites (0.116 ± 0.215 mm).ConclusionIn summary, the artificial intelligence-based virtual measurement proposed in this work provides an innovative technique potentially for accurately measuring soft tissue thickness using clinical routine 3D imaging systems, which will aid clinicians in generating a more comprehensive diagnosis with less invasive procedures and, in turn, optimize the treatment plans with more predictable outcomes.

Accuracy of robot-assisted stereotactic MRI-guided laser ablation in children with epilepsy.

Robot-assisted (RA) stereotactic MRI-guided laser ablation has been reported to be a safe and effective technique for the treatment of epileptogenic foci in children and adults. In this study the authors aimed to assess the accuracy of RA stereotactic MRI-guided laser fiber placement in children and to identify factors that might increase the risk of misplacement. A retrospective single-institution review of all children from 2019 to 2022 who underwent RA stereotactic MRI-guided laser ablation for epilepsy was undertaken. Placement error was calculated at the target by measuring the Euclidean distance between the implanted laser fiber position and the preoperatively planned position. Collected data included age at surgery, sex, pathology, date of robot calibration, number of catheters, entry position, entry angle, extracranial soft-tissue thickness, bone thickness, and intracranial catheter length. A systematic review of the literature was also performed using Ovid Medline, Ovid Embase, and the Cochrane Central Register of Controlled Trials. In 28 children with epilepsy, the authors assessed 35 RA stereotactic MRI-guided laser ablation fiber placements. Twenty (71.4%) children had undergone ablation for hypothalamic hamartoma, 7 children (25.0%) for presumed insular focal cortical dysplasia, and 1 patient (3.6%) for periventricular nodular heterotopia. Nineteen children were male (67.9.%) and 9 were female (32.1%). The median age at the time of the procedure was 7.67 years (IQR 4.58-12.26 years). The median target point localization error (TPLE) was 1.27 mm (IQR 0.76-1.71 mm). The median offset error between the planned and actual trajectories was 1.04° (IQR 0.73°-1.46°). Patient age, sex, pathology and the time interval between date of surgery and robot calibration, entry position, entry angle, soft-tissue thickness, bone thickness, and intracranial length were not associated with the placement accuracy of the implanted laser fibers. However, the number of catheters placed did correlate with the offset angle error on univariate analysis (ρ = 0.387, p = 0.022). There were no immediate surgical complications. Meta-analysis indicated that the overall pooled mean TPLE was 1.46 mm (95% CI -0.58 to 3.49 mm). RA stereotactic MRI-guided laser ablation for epilepsy in children is highly accurate. These data will aid surgical planning.

USG guided indices as a tool for prediction of difficult airway in obese: an observational study

Background: Now a days, Ultrasound has been the gold standard and an invaluable tool in the field of regional anaesthesia, especially for upper limb and truncal blocks where general anesthesia is associated with high risk and also in patients posted for general anesthesia with anticipated difficult airway. Recently, few studies have published the importance of Ultrasound in the evaluation of airway and related procedures. Aim of this study is to evaluate the use of USG guided indices for prediction of difficult airway in obese patients and correlating them with clinical parameters. Methods: This study was a prospective observational study done in a tertiary health care center, Government General hospital, Kakinada over a duration of two months from August 2022 to September 2022. Eight Ultrasound parameters like tongue thickness, skin to hyoid distance, pre-epiglottic space, skin to midpoint of vocal cords, skin to thyroid isthmus, anterior soft tissue thickness at suprasternal notch, hyomental distance and thyromental distance were correlated with clinical evaluation (Cormacke-lehane grading) in this study and conclusions were drawn. Results: Out of 30 cases studied, 20 (70%) were predicted to be difficult with Ultrasound airway examination and 16 (53.3%) were found to have difficulty in intubation clinically. Conclusions: The following USG indices like pre-epiglottic space, Skin to midpoint of vocal cords, Anterior soft tissue thickness at Suprasternal notch, Hyomental distance in mid-extended position and thyromental distance were found to be clinically correlated to predict difficult airway and intubation in obese patients.

Structural equation modelling to estimate facial soft tissue thickness parameters based on ethnicity, gender and body mass index: a secondary study on an Iranian dataset.

According to theanthropological importance of soft facial tissue thickness parameters, we aimed to find the association of these parameters with Lur and Arab ethnicities, gender and body mass index (BMI). Structural equation modeling (SEM) was used. As a secondary analysis, SEM was performed on a dataset of 100 participants. The participants were from Lur and Arab populations of Ahvaz province, Iran, from those who referred for magnetic resonance imaging (MRI) due to headache. Multivariate regression illustrated that mental eminence (ME), chain-lip fold (CLF) and end of nasals (END) could not be predicted by the independent variables (p > 0.05). Right masseteric region (RMST) had the maximum predictability with R2 = 0.365, followed by middle philtrum (MID) with R2 = 0.358 (p < 0.001). With respect to our criterion to enter SEM, i.e. existing at least two significant covariates at significance level of 0.05, among staying parameters, only parameters of nasion (NA), MID, superior lip (SL), RMST and left masseteric region (LMST) remained. Among these cases, MID was the only parameter that its three covariates illustrated significant association. MID parameter can be predicted by gender, BMI and Arab ethnicity. By carrying out such studies and creating database, such information can be used in plastic surgery, corpse identification, and facial reconstructionsoftware in archeology.