A 225m long full-scale testing lane was constructed at a local road in Australia to evaluate the performance of the flexible pavements over a weak soft subgrade. The pavements were reinforced with three types of geosynthetic products: High-density polyethylene (HDPE) geogrid, HDPE geocomposite and fibreglass geocomposite. The road was divided into 15 sections with different configurations such as the thickness of the base course, reinforcement types and locations, and base course materials. A series of in-situ tests were conducted on each section to compare the behaviour of the pavement structures, such as the moduli of the subgrade, base course and asphalt layer. The comparison shows that there is a large variation in the properties of the structures and great uncertainties in determining the properties even within the sections with the same configuration. When the base course is weaker, the FWD tests may be able to detect the effect of the reinforcements below the asphalt seal layer. Smaller plates are recommended when determining the modulus of thinner base course layers using FWD or LWD tests to minimize the influences from the subgrade.