Soft-sediment Deformation Structures Research Articles

Small-Scale Soft-Sediment Deformation Structures in the Cross-Bedded Coconino Sandstone (Permian; Arizona, United States); Possible Evidence for Seismic Influence

The Permian Coconino Sandstone of northern Arizona contains numerous small-scale, soft-sediment deformation structures (SSDSs). These novel structures may be indicators of paleoenvironment or sedimentary processes. These SSD are generally shallow and occur on the surfaces of cross-beds, in contrast to convoluted bedding up to tens of meters thick commonly observed in some other eolian sandstones. These differences in structures imply differences in the processes that formed the Coconino Sandstone, or differences in the underlying depositional conditions. These SSDSs occur in outcrops at the Grand Canyon, and farther south in quarries near the towns of Seligman and Ash Fork. Size, orientation, structure, sedimentary context, clay content, and porosity of the structures are described. The SSDSs occur as small folds and ridges on the paleo lee side of otherwise undisturbed cross-beds. Some are associated with small rotated sandstone blocks within the cross-beds. The structures are exposed on bedding plane surfaces and in cross-section on vertical quarry walls. A few SSDSs up to a meter thick also occur in the Coconino Sandstone, but the others are only up to a few cm thick, 2–10 cm wide, and 20 cm to 10 m long. Evidence is presented that liquidization (as fluidization or liquefaction) may have been involved in producing these features, implying a high water content in scattered locations at time of deformation, but this process also requires some stressor to trigger the deformation. Seismic events may provide a triggering mechanism. The Coconino Sandstone SSDSs represent unusual or previously overlooked small-scale features related to individual foreset surfaces.

Diversity of deformation structures in varves of the Weichselian Pyrzyce Basin (NW Poland)

Within the sediments of the Pyrzyce Ice-dammed Lake (Polish Lowlands), a number of soft-sediment deformation structures (SSDS) in varve series were distinguished. The unique morphology of the ice-dammed lake—the occurrence of level IV overload and the presence of dead ice in the central zone (Lake Miedwie) and the marginal reservoir—had a decisive impact on the formation and nature of sedimentary structures. Dead ice melting and loss of support could be the cause of plastic deformation. The highest intensity deformation in layered sediments of both plastic and rigid types was observed in the marginal (highest) part of the reservoir. Their formation is associated with the melting of rooted lumps of dead ice in sub-aquatic conditions. The exception is deformation resulting from desiccation under subaerial conditions. The genesis of the deformation observed in rhythmically-layered varves is associated with the last stage of functioning and disappearance of the reservoir during the recession of an ice sheet of the Pomeranian phase of the Weichselian glaciation. These studies detail the current state of knowledge on the processes and factors responsible for the formation of soft structures occurring in glaciolimnic basin.

Soft-sediment deformation structures in a lacustrine depositional context: An example from the Eocene Dongying Depression in the Bohai Bay Basin, East China

The study documents soft-sediment deformation structures (SSDSs) in the lacustrine Dongying Depression, a Paleogene synrift basin located in the southeastern corner of the Bohai Bay Basin, East China. The focus of this study is the lower part of the upper 4th member of the Eocene Shahejie Formation (Es4U), characterized by littoral to sublittoral deposits in the southwestern Dongying Depression. Nine lithofacies are grouped into the upper shoreface facies associations (FA1-1), lower shoreface facies associations (FA1-2), and sublittoral facies associations (FA2). Fine-grained calcareous sandstone was mainly deposited in FA1-1, with thinly alternating calcareous mudstone and siltstone or sandstone in FA1-2, while deposition in FA2 was dominated by mudstone, containing sediment gravity flow deposits. The SSDSs widely encountered in the lower Es4U can be classified into seven categories: (1) load structures, (2) water-escape structures, (3) folds and convolute lamination, (4) sediment-injection structures, (5) microfaults, (6) autoclastic breccias, and (7) slumps. Detailed observations of SSDSs from cores indicate liquefaction and fluidization as the main deformation mechanisms in the sands and muds. Moreover, rupturing of cohesive deposits also contributes to the soft-sediment deformation. The types and morphologies of the SSDSs are closely related to the rheologies of the sediments (e.g., the sand content), influenced by the facies that determine the lithologies and stratigraphic stacking patterns. Except for some deformation structures related to subaqueous sediment gravity flows (e.g., muddy debrite flows and slumps), most SSDSs are ascribed to rift-related seismicity due to the activity of the adjacent synsedimentary faults when the Dongying Depression underwent quick subsidence during the Eocene.

Processes and evolution of the Pleistocene coastal sedimentary succession of Es Codolar (Southern Eivissa, Balearic Islands, Western Mediterranean): insights from soft-sediment deformation structures

We analyze the evolution of the undeformed Middle to Late Pleistocene deposits of Es Codolar (Southern Eivissa, Western Mediterranean). The outcrop records a succession characterized by the alternation of aeolian, colluvial and alluvial fan deposits and palaeosols that result in a complex stratigraphic architecture. In this area, aeolian beds, colluvial deposits and palaeosols are exposed along sea-cliffs for almost 500 m, allowing detailed descriptions both of the general sedimentological and geomorphological features of the Middle to Late Pleistocene deposits. Several different types of soft-sediment deformation structures are described (load-casts structures, injection structures, water-scape structures, rizoconcretions), which will help us in the understanding of the climatic evolution and the syn- post-depositional processes. In this way, main processes triggering the formation of these structures seem to be sea level changes together with a wetter environment during warmer climatic episodes.

Synsedimentary deformation structures within the Paleoproterozoic Espanola Formation, Huronian Supergroup, Canada: Implications for basin tectonism and paleodepositional conditions

The Espanola Formation represents part of the lower Huronian Supergroup (2.45–2.2 Ga), which is interpreted to have been deposited in a restricted, fault-bound, intracontinental rift basin during Early Proterozoic episodes of crustal stretching and contemporaneous faulting along the southern margin of the Archean Superior Province. Field examination of Espanola Formation outcrops exposed north of Elliot Lake, Ontario, Canada, revealed widespread synsedimentary deformation structures, which can be broadly grouped into three main categories: (1) forceful-injection structures, (2) slump structures, and (3) soft-sediment deformation structures. Examples of these structures include clastic dykes, large-scale slump structures, intraformational conglomerate, load casts, ball-and-pillow structures, convolute laminae, and dish-and-pillar structures. Most of the reported deformation structures are restricted to discrete stratigraphic horizons, are laterally continuous on an outcrop scale, are abundant and widespread across the studied region and are confined between undisturbed strata of similar lithology. These characteristics strongly indicate an origin by liquefaction and fluidization mechanisms that were triggered by syndepositional rift-related seismic activity, inferred to have been induced by movement along bounding normal faults during subsidence of the lower Huronian basin. Autogenic triggers such as overloading by rapid sedimentation, slump emplacement, inverse density gradient, gravity-driven sediment transport and mobilization, and storm waves may have also locally contributed to the development of the reported soft-sediment deformation structures.

Soft-sediment deformation structures (slumps) triggered by tectonic activity in the Upper Triassic carbonate succession of Tataouin Basin (south-eastern Tunisia)

Soft-sediment deformation structure crops out in the Upper Triassic carbonate succession of Messaoudi Formation in the north eastern of Tataouine basin (south eastern Tunisia). The deformed interval is about 10 m thick and tack place between shallow-water limestone and stromatolitic bed. Soft-sediment deformation structures (slump), supareted by undeformed beds include boudins, pinch-and-swell structure, and normal faults and folded structures. Observations and measurements of the deformed structure and bed thickness of hinges and limbs indicate that all the deformed structures are related to slump structure, which affects unconsolidated sediment in the local paleo-slope. The internal mechanisms are ruled out due to the absence of features (high sediment rate, traction feature, chemical process). The slump was triggered by external mechanisms; tectonic effects related to the reactivation of EW faults during the opening movements of the paleotethys. These tectonic events generat a moderat seismic activity wich affected unconsolidated sediment.

Slumping as a record of regional tectonics and palaeoslope changes in the Satpura Basin, central India

Abstract Soft-sediment deformation structures play an important role in interpreting regional tectonics and basin evolution during slumping events. The Satpura Basin is interpreted as pull-apart with a monoclinal northerly palaeoslope throughout its evolution. The basin formed as a result of sinistral strike-slip faulting, induced by the ENE–WSW-trending Son-Narmada South fault in the north and the Tapti North fault in the south. We have analysed the slump folds within the basalmost Talchir Formation and related these to regional tectonics and palaeoslope changes in the Satpura Basin. The glaciofluvial strata of the Talchir Formation, exposed in the southern part of the Satpura Basin, record intricacies of folds created during slumping. Several fold styles can be distinguished, within alternations of competent sandstone and incompetent shale layers, some of which indicate buckling. Upright folds, resulting from pure shear, underwent rotation of their axial planes and fold axes during simple shear-dominated progressive deformation when the slump moved downslope. The soft-sediment deformation structures that we have studied show refolding patterns that closely resemble comparable folds known from lithified rocks. These layers with refolded structures are overlain by unde-formed sediments, which proves that they are the product of a single ongoing slumping process, rather than of successive deformation events. Our analysis of their fold axes and axial planes, together with fold vergences and thrust directions within the slumps, suggests a mean slumping direction towards the southwest. Analyses of slump folds and their relationship with regional tectonics have allowed us to reinterpret basin evolution history. The southwesterly trending palaeoslope of the basin suggest that the slope of the basin was not uniform throughout its evolution. At the opening, the oblique slip fault, which trended NE–SW, generated due to movement along the ENE–WSW basin bounding faults, was more active and triggered slumping event within the Talchir deposits in the basin. With progressive overlapping of the basin-bounding faults, the Satpura Basin gradually tilted towards the north.

Lacustrine Slope-Related Soft-Sediment Deformation Structures in the Cretaceous Gyeokpori Formation, Buan Area, SW Korea, and Volcanism-Induced Seismic Shocks as Their Possible Trigger

The Gyeokpori Formation in the Buan volcanic area primarily contains siliciclastic rocks interbedded with volcanoclastics. These sediments are characterized by a variety of soft-sediment deformation structures (SSDS). The SSDS in the Gyeokpori Formation are embedded in poorly sorted conglomerates; slump folds are also present in the formation. The deformation mechanisms and triggers causing the deformation are not yet clear. In the present study, the trigger of the SSDS in the Gyeokpori Formation was investigated using facies analysis. This included evaluation of the reworking process of both cohesive and non-cohesive sediments. The analysis indicates that the SSDS are directly or indirectly associated with the alternation of conglomerates and mud layers with clasts. These layers underwent non-cohesive and cohesive deformation, respectively, which promoted SSDS formation. The slump folds were controlled by the extent of cohesive and non-cohesive deformation experienced by the sediment layers in the slope environment. The SSDS deformation style and morphology differ, particularly in the case of reworking by slump activity. This study contributes to the understanding of lacustrine slope-related soft-sediment deformation structures.

Seismically triggered soft-sediment deformation structures in Tashkorgan lacustrine sediments, northeastern Pamir, China

Soft-sediment deformation structures (SSDSs) are widely developed in the lacustrine sediments of paleo-dammed lakes in tectonically active regions and contain a wealth of information on regional fault activity. In this study, multiple SSDSs (load structures, small-scale slump structures, droplets, diapir and pillow structures, silty-clay pillars and large-scale slump structures) were identified in the strata of the Late Pleistocene lacustrine sediments in the Tashkorgan River drainage in northeastern Pamir. The deformation mechanisms of the SSDSs were related to the liquefaction, fluidization and thixotropic behaviors. The regional tectonic settings and SSDS features point toward a trigger mechanism with seismic activities and indicate that the seismogenic faults were possibly related to the southern part of the Kongur Shan extensional system. Accelerator mass spectrometry (AMS) radiocarbon dating data showed that the SSDSs in the Tashkorgan lacustrine sediments formed 30,221-29,932 cal BP and 25,825-25,317 cal BP. The results of this study improve our understanding of fault activity and geodynamic processes in northeastern Pamir during the Late Pleistocene.

Aseismic and seismic impact on development of soft-sediment deformation structures in deep-marine sand-shaly Crocker fan in Sabah, NW Borneo

Soft-sediment deformation structures are present within the deep-marine fan of the West Crocker Formation, Sabah Basin, NW Borneo. Focus of this study is to highlight the impact of seismic and aseismic activities on the development of these structures and their distribution in deep-marine fan. Twenty-nine types of deformation structures were identified during the study of twelve exposed sections. These structures were grouped into five categories: i) water-escape structures, ii) sole marks, iii) clastic intrusions, iv) deformed laminations, and v) syn-depositional brittle and ductile deformation structures. The sediment deformation is interpreted to be caused either by aseismic processes like slope failure, gravity collapse, sediment overloading, density gradient, seismic induced mechanisms such as earthquakes, tectonic uplift, or combined effect of seismic and aseismic events. These structures are classified based on type of features developed during semi-consolidated phase of rock deposition. The seismite structures i.e., clastic intrusions, deformed laminations, and syn-depositional structures are correlated with active collisional tectonics during the Late Paleogene times in the Sabah Basin. In the present work, a generalized conceptual model has also been proposed for the development of soft-sediment deformation structures in a submarine fan environment. Dewatering structurers and rapid sedimentation features are associated with inner fan, load and flame structures are present within middle fan, while contorted layers, slumps and mass-transport deposits are linked with distal fan settings.

Soft-sediment deformation in the Sergipe-Alagoas Basin, Brazil: Implications for paleoseismicity in intraplate areas

Several studies have cited soft-sediment deformation as evidence of fault reactivation and paleoseismicity in intraplate coastal settings. However, a consensus has not been reached on the extent of paleoseismic activity in several regions and the link with continental-scale faults. This research aims to determine the origin of the deformation in soft-sediments, both in the Neogene Barreiras Formation and in Pleistocene sediments of the Sergipe-Alagoas Basin, on the continental margin of northeastern Brazil. The region shows a historical record since 1808 of earthquakes with maximum modified Mercalli intensity of VII and a 40-year instrumental record of events with maximum body-wave magnitude (mb) of 5.2. The brevity of these records leads to large uncertainties in estimates of fault slip rate, recurrence, and seismic hazard. Geologic studies of seismically induced soft-sediment deformation structures and their relationship to seismically active faults offer the opportunity to reduce these uncertainties. We present detailed descriptions of the deformation structures with emphasis on morphology, ductile or brittle character, size, and distribution of the features. In addition, we integrate geologic data with seismic reflection data, thus allowing for correlation between the normal faults at the seismic scale and the soft-sediment deformation structures at the outcrop scale. Faults associated with seismites at the outcrop scale exhibit the same strike/dip and kinematics and are spatially related to the major faults identified at the seismic-section scale. Regarding ductile features, the most remarkable are convoluted folds associated with a deformed muddy layer, giant sinking structures, and complex folds. Concerning brittle structures, the most striking are clastic dikes, mixed layers, autoclastic breccias, and fault breccias. The alternating records in the Neogene sediments indicate clustered seismic activity, combined with tectonic quiescence periods. In Pleistocene sediments, the size, frequency, lateral continuity, and spatial distribution of tens of kilometers of the deformation structures indicate a period of frequent earthquakes with body-wave magnitudes equal to or greater than 6. The recognition of seismic activity and brittle reactivation of preexisting faults during the Neogene-Quaternary has far-reaching implications for seismic hazards in intraplate settings.

Liquefaction and re-liquefaction of sediments induced by uneven loading and glacigenic earthquakes: Implications of results from the Latvian Baltic Sea coast

Seven internally-deformed layers were recognised in the shallow marine bay sediments deposited during mid Marine Isotope Stage 2 along the Latvian Baltic Sea coast bluff at Baltmuiža. Detailed sedimentological analyses of these deformed layers indicate that liquefaction was responsible for the development of soft-sediment deformation structures (SSDS) including injection structures, load casts, flame structures and pseudonodules. Traces of both initial liquefaction and re-liquefaction were recognised within at least four of the seven layers with SSDS (two different generations of pseudonodules and injection structures, clastic injection pipes, disrupted load casts). This is a unique finding, as it is difficult to re-liquefy sediment affected by previous liquefaction due to the increased packing of grains and decreased hydration after initial liquefaction. Furthermore, all layers with SSDS are characterised by eroded tops, which indicate that deformation took place when these layers were at the contemporary surface of sedimentation. We suggest that the initial liquefaction of fluidised coastal sediments was caused by various triggers (uneven loading, glacigenic earthquake), while the re-liquefaction could be related to a single trigger of mid-Late Weichselian glacigenic earthquakes at the front of the advancing last Fennoscandian Ice Sheet. Our results show that despite compaction after liquefaction, sediment re-liquefaction caused by an allogenic trigger is still possible under favourable conditions, i.e., sediment anisotropy, cyclic loading, and preserved high water saturation. Our findings are also the first to demonstrate the sedimentological imprints of re-liquefaction.

U-Pb Age Dating and Geochemistry of Soft-Sediment Deformation Structure-Bearing Late Cretaceous Volcano-Sedimentary Basins in the SW Korean Peninsula and Their Tectonic Implications

Cretaceous volcano-sedimentary basins and successions in the Korean Peninsula are located along NE-SW- and NNE-SSW-trending sinistral strike–slip fault systems. Soft-sediment deformation structures (SSDS) of lacustrine sedimentary strata occur in the Wido, Buan, and Haenam areas of the southwestern Korean Peninsula. In this study, systematic geological, geochronological, and geochemical investigations of the volcanic-sedimentary successions were conducted to constrain the origin and timing of SSDS-bearing lacustrine strata. The SSDS-bearing strata is conformably underlain and overlain by volcanic rocks, and it contains much volcaniclastic sediment and is interbedded with tuffs. The studied SSDSs were interpreted to have formed by ground shaking during syndepositional earthquakes. U-Pb zircon ages of volcanic and volcaniclastic rocks within the studied volcano-sedimentary successions were ca. 87–84 Ma, indicating that active volcanism was concurrent with lacustrine sedimentation. Geochemical characteristics indicate that these mostly rhyolitic rocks are similar to subduction-related calc-alkaline volcanic rocks from an active continental margin. This suggests that the SSDSs in the study area were formed by earthquakes related to proximal volcanic activity due to the oblique subduction of the Paleo-Pacific Plate during the Late Cretaceous.

Fluid conduits formed along burrows of giant bivalves at a cold seep site, Sounthern Taiwan

At a Pliocene methane seep site in Taiwan characterized by numerous tubular carbonate bodies and bivalves, a half meter-long dolomitic concretion containing a lucinid bivalve Anodontia goliath reveals the impact of chemosymbiotic bivalves on fluid migration through shallow sediments. The concretion consists of a cortex encasing a central channel filled with sparite and varying amounts of brecciated material derived from the channel walls. The studied bivalve is preserved with the hinge upward. When restored to life position, the central channel is connected to the anterior side of the bivalve. In the lower longer segment, the channel is connected to the posterior sector of the bivalve. The channels are interpreted as the anterior tube for supply of respiration water and the posterior tube for mining sulphide generated in the sulfate-methane transition zone of the sediment. The dolomitic cortex surrounding the central channel is characterized by δ13C values as low as −29‰ VPDB, indicating that the rate of anaerobic oxidation of methane was enhanced around the conduit. At the base of the central channel, upward soft sediment deformation structures likely resulted from the dragging effect when fluid migrated out of the sediment and entered the channel. Brecciation of the channel walls indicates pulsating seepage during the incipient stages of cementation. The burrow, thus, acted as a highly permeable conduit channeling upstreaming methane-charged fluid for a substantial period of time. Therefore, burrows can be efficient in pre-determining the formation of fluid conduits at seep sites, having potentially a large impact on fluid mixing and diagenetic reaction rates in sediments, and ultimately the amount of methane released. The reported bivalve with its conserved burrow fossilized as seep carbonate concertion provides direct evidence that fluid conduits form along animal burrows.

What controls the remobilization and deformation of surficial sediment by seismic shaking? Linking lacustrine slope stratigraphy to great earthquakes in South-Central Chile.

Remobilization and deformation of surficial subaqueous slope sediments create turbidites and soft sediment deformation structures, which are common features in many depositional records. Palaeoseismic studies have used seismically‐induced turbidites and soft sediment deformation structures preserved in sedimentary sequences to reconstruct recurrence patterns and – in some cases – allow quantifying rupture location and magnitude of past earthquakes. However, current understanding of earthquake‐triggered remobilization and deformation lacks studies targeting where these processes take place, the subaqueous slope and involving direct comparison of sedimentary fingerprint with well‐documented historical earthquakes. This study investigates the sedimentary imprint of six megathrust earthquakes with varying rupture characteristics in 17 slope sediment cores from two Chilean lakes, Riñihue and Calafquén, and evaluates how it links to seismic intensity, peak ground acceleration, bracketed duration and slope angle. Centimetre‐scale stratigraphic gaps ranging from ca 1 to 20 cm – caused by remobilization of surficial slope sediment – were identified using high‐resolution multi‐proxy core correlation of slope to basin cores, and six types of soft sediment deformation structures ranging from ca 1 to 25 cm thickness using high‐resolution three‐dimensional X‐ray computed tomography data. Stratigraphic gaps occur on slope angles of ≥2.3°, whereas deformation already occurs from slope angle 0.2°. The thickness of both stratigraphic gaps and soft sediment deformation structures increases with slope angle, suggesting that increased gravitational shear stress promotes both surficial remobilization and deformation. Seismic shaking is the dominant trigger for surficial remobilization and deformation at the studied lakes. Total remobilization depth correlates best with bracketed duration and is highest in both lakes for the strongest earthquakes (M w ca 9.5). In lake Riñihue, soft sediment deformation structure thickness and type correlate best with peak ground acceleration providing the first field‐based evidence of progressive soft sediment deformation structure development with increasing peak ground acceleration for soft sediment deformation structures caused by Kelvin‐Helmholtz instability. The authors propose that long duration and low frequency content of seismic shaking favours surficial remobilization, whereas ground motion amplitude controls Kelvin‐Helmholtz instability‐related soft sediment deformation structure development.

Scratching the discs: evaluating alternative hypotheses for the origin of the Ediacaran discoidal structures from the Cerro Negro Formation, La Providencia Group, Argentina

AbstractIn the Ediacaran marine succession of the Cerro Negro Formation (Tandilia System, NE Argentina), abundant microbially induced sedimentary structures indicate general conditions of substrate biostabilization. Numerous discoidal structures in this succession were previously interpreted as moulds of soft-tissue holdfasts of sessile organisms, within the form genus Aspidella. In this study, we performed a detailed re-analysis of some of these features and discuss two alternative hypotheses to explain their genesis: (1) as the result of soft-sediment deformation and fluid injection structures; and (2) as structures of active animal–sediment interaction (i.e. trace fossils). We show that the dome-shaped discs are internally laminated, with a cylindrical to a funnel-shaped vertical tube at their central region. The presence of these downwards vertical extensions and other intricate internal arrangements cannot be explained under the taphonomic spectrum of discoidal fossils, but shows striking similarities to Intrites-like structures and other sand-volcano-like pseudofossils (e.g. Astropolithon). However, some structures are hard to distinguish from vertical dwelling burrows with funnel-shaped apertures and thick-lined walls, commonly produced by suspension- and detritus-feeding invertebrates (e.g. Skolithos isp., Monocraterion isp. and, less likely, Rosselia isp.). Since reliable age constraints are unavailable, and further investigation concerning other palaeobiological indicators is needed, the most parsimonious hypothesis is that of a structure derived from fluid-escape processes. Our study demonstrates the importance of detailed investigation on discoidal structures in either upper Ediacaran or lower Cambrian strata.

Seismically-Induced Soft Sediment Deformation Structures In and Around Chamoli, Garhwal Himalaya, India

Soft-sediment deformation structures were identified along Nandakini River valley near Chamoli village of Garhwal Lesser Himalaya. The deformation, in each outcrop, is restricted to a single stratigraphic layer bounded by undeformed flat-lying layers, eliminating the influence of slope failure. The structures are multiple liquefaction features like sand dikes, flame structures, pear-drop disturbance and downward warping of beds. The preferred interpretation is that the deformations resulted from earthquake-induced liquefaction and their existence adjacent to the Nandaprayag Fault can be related to episodic seismicity that occurred along this fault. However, more data and dating technique is needed to constrain the timing and distance to the causative seismic source. It is possible that more than one earthquake has effected the deformations.

Dinos among the dunes: Dinoturbation in the Pirambóia Formation (Paraná Basin), São Paulo State and comments on cross-section tracks

Soft-sediment deformation structures are conspicuous features found in both ancient and modern, shallowly buried, loose, and water-saturated sediments related to diverse depositional environments. Numerous triggering mechanisms can induce their development, including seismicity, glaciotectonics, overload, and bioturbation. The presence of soft-sediment deformation in the Jurassic fluvial-eolian Pirambóia Formation has been known for a long time and was usually associated with seismic-induced triggers. Recently described synsedimentary structures in wet interdune deposits from the lower part of this unit, close to its type area in São Paulo State, southeastern Brazil, are now interpreted as true cross-section tracks produced by large tetrapods based on examples from the literature and morphological analyzes. Based on their age, size, and comparisons with dinosaur tracks described in Jurassic lithostratigraphic units from Paraná Basin in Brazil (Guará Formation) and Waterberg Basin (Etjo Formation), we suggest here, for the first time, that some of those deformational structures were produced by dinosaurs. Furthermore, the cross-section tracks from the Pirambóia Formation in São Paulo State exceed in size the tracks with therapsid affinity described in the Permian-Triassic unit in southern Brazil, hindering their full correlation. This finding may potentially represent the oldest evidence of the presence of dinosaurs in the São Paulo State territory, expanding our knowledge of the poorly known Jurassic tetrapod fauna of Brazil. Additionally, these cross-section tracks reinforce the possible correlation, at least in part, of the Pirambóia Formation in its northern occurrence (near to its type area) with the Jurassic Guará Formation from southern Brazil.

Soft-sediment deformation structures (SSDS) in the Ediacaran and lower Cambrian succession of the Aksu area, NW Tarim Basin, and their implications

The Tarim Basin, the largest continental and marine superimposed basin in the northwestern part of China, is typically viewed as a stable and uninterrupted sequence during the Ediacaran-Cambrian transition. Undeformed strata, thick shallow marine sediments and thin deep marine sediments characterize the basin. In this study, we identify various types of soft-sediment deformation structures (SSDS) and an unconformity at four localities in the Aksu area, NW Tarim Basin. SSDSs include large-scale load structures, plastic intrusions and extrusions, load casts and pillow structures, liquefied breccias, ground fissures and lateral liquefaction, boudinage-like SSDSs, mound and sag structures, slumps, and small syn-sedimentary faults. The deformed layers are sandwiched between undeformed sedimentary rocks. Deformation features are found in the (a) lower Cambrian Yuertusi Formation consisting of interbedded thin black shale and phosphorite chert layers, thick-bedded shallow gray dolomite and silicate layers; (b) upper Ediacaran Qigebulak Formation composed of dark gray to gray dolomite and grayish green mudstone layers; (c) in the brown sandstone layers of the lower Ediacaran Sugaitebulak Formation. These units contain fluvial-lacustrine, nearshore, carbonate platform, shelf, and bathyal sedimentary environments. The SSDSs and more detailed stratigraphy indicate a dynamic setting that includes the heretofore unrecognized unconformities, a sub-stratigraphic sequence interface and high magnitude seismic events. The SSDS were produced during rifting, short sub-aerial exposure and frequent seismic disturbances. Combined on the carbon and oxygen isotope records, gamma radiations and the concentrations of main and trace elements, the differences between the SSDS layers and the undeformed layers are preliminary analyzed. We propose that this sequence not reflect a stable tectonic-sedimentary environment during the Ediacaran-Cambrian transition. Therefore, these units provide a unique glimpse into paleo-tectonic activity and paleo-ecological-environmental variation in the Tarim Basin during the late period of Rodinia breakup and the assembly of Gondwana.

ОТРАЖЕНИЕ ПАЛЕОСЕЙСМИЧЕСКИХ СОБЫТИЙ В ПОЗДНЕПЛЕЙСТОЦЕН-ГОЛОЦЕНОВЫХ ОТЛОЖЕНИЯХ ТЕРРАС ОЗЕРА ИМАНДРА (КОЛЬСКИЙ РЕГИОН)

Soft-sediment deformation structures have been indentified in glaciolacustrine deposits of the terrace complexes of the Lake Imandra (Kola Region, NE of the Fennoscandian Shield). According to the paleoseismological criteria, we found that these deformation structures were induced by strong earthquakes. These earthquakes led to the occurrence of secondary deformations of various morphology and sizes in the sandy-sandy sediments, forming a single complex consisting of intensely deformed and destructed deposits and associated clastic dikes and cracks. Among the plastic deformations, the phenomena of liquefaction, boudinage structures, flame structures, irregular convolute stratifications, diapir-like structures and synsedimentary folds are developed. Among brittle deformations, cracks and micro-fractures and dykes, predominate. The spatial and stratigraphic distributions of soft-sediment deformation structures were used to infer about the activation of faults during the Late Glacial and Postglacial period of the sub-latitudinal and north-western strike directions that limit the different-scale blocks of the earth’s crust. According to radiocarbon analysis data and paleogeographic reconstructions, the formation of soft-sediment deformations took place at the end of the Young Dryas – the beginning of the Preboreal period between 12900–11500 cal yr BP, and later, in the Preboreal period – beginning of the Boreal period between 11500– 9900 cal yr BP. It was this period that was accompanied by increased seismic activity not only in the Kola region, but also in the whole of Fennoscandia.