Sodium-ion Batteries Research Articles

Microfluidic Synthesis of Multifunctional Micro-/Nanomaterials from Process Intensification: Structural Engineering to High Electrochemical Energy Storage.

Multifunctional micro-/nanomaterials featuring functional superiority and high value-added physicochemical nature have received immense attention in electrochemical energy storage. Microfluidic synthesis has become an emergent technology for massively producing multifunctional micro-/nanomaterials with tunable microstructure and morphology due to its rapid mass/heat transfer and precise fluid controllability. In this review, the latest progresses and achievements in microfluidic-synthesized multifunctional micro-/nanomaterials are summarized via reaction process intensification, multifunctional micro-/nanostructural engineering and electrochemical energy storage applications. The reaction process intensification mechanisms of various micro-/nanomaterials, including quantum dots (QDs), metal materials, conducting polymers, metallic oxides, polyanionic compounds, metal-organic frameworks (MOFs) and two-dimensional (2D) materials, are discussed. Especially, the multifunctional structural engineering principles of as-fabricated micro-/nanomaterials, such as vertically aligned structure, heterostructure, core-shell structure, and tunable microsphere, are introduced. Subsequently, the electrochemical energy storage application of as-prepared multifunctional micro-/nanomaterials is clarified in supercapacitors, lithium-ion batteries, sodium-ion batteries, all-vanadium redox flow batteries, and dielectric capacitors. Finally, the current problems and future forecasts are illustrated.

Unlocking the Na-Storage Behavior in Hard Carbon Anode by Mass Spectrometry.

Hard carbon (HC) is a promising anode candidate for Na-ion batteries (NIBs) because of its excellent Na-storage performance, abundance, and low cost. However, a precise understanding of its Na-storage behavior remains elusive. Herein, based on the D2O/H2SO4-based TMS results collected on charged/discharged state HC electrodes, detailed Na-storage mechanisms (the Na-storage states and active sites in different voltage regions), specific SEI dynamic evolution process (formation, rupture, regeneration and loss), and irreversible capacity contribution (dead Na0, NaH, etc.) were elucidated. Moreover, by employing the online electrochemical mass spectrometry (OEMS) to monitor the gassing behavior of HC-Na half-cell during the overdischarging process, a surprising rehydrogen evolution reaction (re-HER) process at around 0.02 V vs Na+/Na was identified, indicating the occurrence of Na-plating above 0 V vs Na+/Na. Additionally, the typical fluorine ethylene carbonate (FEC) additive was demonstrated to reduce the accumulation of dead Na0 and inhibit the re-HER process triggered by plated Na.

Ribbon-Ordered Superlattice Enables Reversible Anion Redox and Stable High-Voltage Na-Ion Battery Cathodes.

High-voltage layered oxide cathodes attract great attention for sodium-ion batteries (SIBs) due to the potential high energy density, but high voltage usually leads to rapid capacity decay. Herein, a stable high-voltage NaLi0.1Ni0.35Mn0.3Ti0.25O2 cathode with a ribbon-ordered superlattice is reported, and the intrinsic coupling mechanism between structure evolution and the anion redox reaction (ARR) is revealed. Li introduction constructs a special Li-O-Na configuration activating reversible nonbonded O 2p (|O2p)-type ARR and regulates the structure evolution way, enabling the reversible Li ions out-of-layer migration instead of the irreversible transition metal ions out-of-layer migration. The reversible structure evolution enhances the reversibility of the bonded O 2p (O2p)-type ARR and inhibits the generation of oxygen dimers, thus suppressing the irreversible molecular oxygen (O2)-type ARR. After the structure regulation, the structure evolution becomes reversible, |O2p-type ARR is activated, O2p-type ARR becomes stable, and O2-type ARR is inhibited, which largely suppresses the capacity degradation and voltage decay. The discharge capacity is increased from 154 to 168 mA h g-1, the capacity retention after 200 cycles significantly increases from 35 to 84%, and the voltage retention increases from 78 to 93%. This study presents some guidance for the design of high-voltage, O3-type oxide cathodes for high-performance SIBs.

Air-Stable High-Entropy Layered Oxide Cathode with Enhanced Cycling Stability for Sodium-Ion Batteries.

O3-type layered oxides have been extensively studied as cathode materials for sodium-ion batteries due to their high reversible capacity and high initial sodium content, but they suffer from complex phase transitions and an unstable structure during sodium intercalation/deintercalation. Herein, we synthesize a high-entropy O3-type layered transition metal oxide, NaNi0.3Cu0.05Fe0.1Mn0.3Mg0.05Ti0.2O2 (NCFMMT), by simultaneously doping Cu, Mg, and Ti into its transition metal layers, which greatly increase structural entropy, thereby reducing formation energy and enhancing structural stability. The high-entropy NCFMMT cathode exhibits significantly improved cycling stability (capacity retention of 81.4% at 1C after 250 cycles and 86.8% at 5C after 500 cycles) compared to pristine NaNi0.3Fe0.4Mn0.3O2 (71% after 100 cycles at 1C), as well as remarkable air stability. Finally, the NCFMMT//hard carbon full-cell batteries deliver a high initial capacity of 103 mAh g-1 at 1C, with 83.8 mAh g-1 maintained after 300 cycles (capacity retention of 81.4%).

Design and Synthesis of Sb-doped CuS@C Hollow Nanocubes as Efficient Anode Materials for Sodium-Ion Battery.

CuShave received widespread attention for application as anode materials in sodium-ion batteries due to their potent capabilities and eco-friendly properties. However, it is a challenge to achieve a high rate capability and long cycle stability owing to the heterogeneous transfer of sodium ions during charge-discharge, the interior poor electron conductivity and repeated volumetric expansion of copper sulfide. In this study, Sb-doped CuS hollow nanocubes coated with carbon shells (Sb-CuS@C) was designed and constructed as anode nanomaterials in sodium ion batteries. Thanks to the intrinsic good electron conductivity and chemical stability of carbon shells, Sb-CuS@C possesses a higher overall electron transfer as anode material, avoids agglomeration and structural destruction during the cycling. As a result, the synthesized Sb-CuS@C achieved an excellent reversible capacity of 595 mA h g-1 after 100 cycles at 0.5 A g-1 and a good rate capability of 340 mA h g-1 at a higher 10 A g-1. DFT calculations clarify that the uniformly doped Sb would act as active sodiophilic nucleation sites to help adsorbing Na+ during discharging and leading uniform sodium deposition. This work provides a new insight into the structural and componential modification for common transition-metal sulfides towards application as anode materials in SIB.

Regulation on reacting solvent engineering for scalable synthesis of Na3(VOPO4)2F@carbon nanotubes microsphere cathodes towards high-power and long-lifespan Na-ion batteries

Na3(VOPO4)2F (NVOPF) has emerged as a promising cathode candidate for commercial Na-ion batteries, ascribed to its elevated theoretical energy density and robust structure during the extraction/insertion of two Na+ ions. However, the intrinsic poor electronic conductivity and unscalable materials-preparation technologies make it unexpected to stand out in large-scale energy storage systems. In this study, a spray-drying process technology is implemented to synthesize Na3(VOPO4)2F@carbon nanotubes (NVOPF@CNTs) composite through the reduction of V5+ driven by methanol at room temperature, in which the shortened Na-ion transfer path and the rapid electron mobility are facilitated by the CNTs. The resulting NVOPF@CNTs electrode exhibits exceptional capabilities, including a high discharge capacity (122.1 mA h g−1 at 1 C= 120 mA h g−1), outstanding rate performance (103.1 mA h g−1 at 100 C), and an extended lifespan (71.8 % capacity retention after 6000 cycles at 20 C). Additionally, the Na3(VOPO4)2F//NaTi2(PO4)3 full battery system demonstrates impressive high-power output capabilities (93.3 mA h g−1, 20 C), versatile current switching adaptability, and robust cycling performance (75.3 % of 98.5 mA h g−1 for the initial capacity after 3000 cycles). The study underscores the potential of improving the preparation of vanadium-based phosphate materials to enhance the practical application of Na-ion batteries.

Dual-gradient Concentration Distribution in Sb-Cu Alloy Nanoarrays for Robust Sodium-ionStorage.

Alloy-type materials are attractive for anodes in sodium-ion batteries (SIBs) owing to their high theoretical capacities and overall performance. However, the accumulation of stress/strain during repeated cycling results in electrode pulverization, leading to rapid capacity decay and eventual disintegration, thus hindering their practical applications. Herein, we report a 3D coral-like Sb-Cu alloy nanoarray with gradient distribution of both elements. The array features a Sb-rich bottom and a Cu-rich top with increasing Sb and decreasing Cu concentrations from top to bottom. The former is the active component that provides the high capacity, whereas the latter serves as an inert additive that acts against volume variation. The gradual transition in composition within the electrode introduces a ladder-type volume expansion effect, facilitating a smooth distribution and effective release of stress, thereby ensuring the wanted mechanical stability and structural integrity. The as-developed nanoarray affords a high reversible capacity (460 mAh g-1 at 0.5 C), stable cycling (89% retention over 120 cycles at 1.0 C), and superior rate capability (354 mAh g-1 at 10 C). The concentration dual-gradient strategy paves a new pathway of designing alloy-type materials for SIBs.

Polyaniline-Coated Na3V2(PO4)2F3 Cathode Enables Fast Sodium Ion Diffusion and Structural Stability in Rechargeable Batteries.

Na3V2(PO4)2F3 (NVPF), a typical sodium superionic conductor (NASICON) type structure, has attracted much interest as a potential positive electrode in sodium-ion battery. However, the inherently poor electronic conductivity of phosphates compromises the electrochemical properties of this material. Here, we develop a general strategy to improve the electrochemical performance by preparing a new composite material "polyaniline (PANI)@NVPF" using a Pickering emulsion method. The X-ray diffraction and Raman results indicated a successful PANI coating without affecting the NASICON-type structure of NVPF, and they enhanced the interfacial bonding between the two components. Also, thermogravimetric analysis and scanning electron microscopy analyses revealed that the PANI content influenced the thermal stability and morphology of the nanocomposites. As a result, the sodium test cells exhibited multielectron reactions and a better rate performance for PANI@NVPF nanocomposites as compared to NVPF. Specifically, 2%PANI@NVPF maintained 70% of its initial capacity at 5C. Ex-situ electron paramagnetic resonance revealed the existence of mixed valence states of vanadium (V4+/V3+) in both discharge and charge processes. Consequently, the successful PANI coating into the sodium superionic conductor framework improved the sodium diffusion channels with a measurable increase of diffusion coefficients with cycling (ca. 3.25 × 10-11 cm2 s-1). Therefore, PANI@NVPF nanocomposites are promising cathode candidates for high-rate sodium-ion battery applications.

Suppressed O3–P3 phase transition of Cu/Fe/Mn-based layered oxides as cathode materials for high performance sodium-ion batteries

O3-type Cu/Fe/Mn-based layered oxides are regarded as promising cathode materials for sodium-ion batteries due to the abundance of elements in the Earth's crust and the imperative for large-scale energy storage. However, these materials still encounter some challenges, including low capacity and insufficient rate performance. In this study, Al-doped, cobalt-free, and nickel-free Na0.9Cu0.18Fe0.3Mn0.52-xAlxO2 (x = 0, 0.03, 0.05, 0.08) are successfully synthesized by using the solid-state method to introduce non-electrochemically active elements to stabilize the crystal structure and enhance the electrochemical performance. The impact of Al-doping is comprehensively analyzed by using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), galvanostatic intermittent titration technique (GITT), and electrochemical impedance spectroscopy (EIS). Al-doping effectively enhances the diffusion coefficient of Na+, reduces the Jahn-Teller effect caused by Mn3+ and mitigates the transition from O3 to P3 phase. Finally, it stops the partial phase transitions from O3 to P3, which can be found in pristine oxide without Al-doping during charge-discharge cycling. Notably, the Na0.9Cu0.18Fe0.3Mn0.47Al0.05O2 electrode exhibits a reversible capacity of 123.89 mAh g−1 at 0.1 C, a capacity retention rate of 91.1 % after 200 cycles at 1 C, and a discharge capacity of 66.36 mAh g−1 at a high rate of 5 C.

Unveiling the impact of stabilization pretreatment on sodium storage performance in hard carbon

Stabilization pretreatment coupled with molecular cross-linking is commonly used to modify starch, aiming to obtain starch-based hard carbon materials with appropriate spherical particle sizes. Nevertheless, the impact of the intermediate stabilization process on its sodium storage performance remains unclear. Herein, a hard carbon material with no surface open pores, low specific surface area and abundant internal closed pores with thinner pore walls is successfully synthesized and exhibits significantly improved initial Coulombic efficiency and plateau capacity through a simple low-temperature pretreatment strategy, using renewable and cost-effective soluble starch as the raw material. Additionally, research indicates that an appropriate degree of disorder or defectiveness is conducive to forming a larger quantity of closed pores with thinner pore walls. Both excessively low and high defect levels are detrimental to the formation of closed pores. This work will encourage researchers to further focus on the impact of defectiveness on closed pores, which will promote the development of high-energy practical sodium-ion batteries.

Understanding the Sodium Storage Behavior of Closed Pores/Carbonyl Groups in Hard Carbon.

Hard carbon (HC) is a promising anode material for sodium-ion batteries. However, the intrinsic relationship between the closed pores/surface groups and sodium storage performance has been unclear, leading to difficulties in targeted regulation. In this study, renewable tannin extracts were used as raw materials to prepare HC anodes with abundant tunable closed pores and carbonyl groups through a pyrolytic modulation strategy. Combining ex situ characterizations reveals that closed pores and carbonyl groups are regulated by the pyrolytic process. Further, it is demonstrated that the plateau region is mainly contributed by the closed pores; highly stable fluorine-rich solid electrolyte interphase compositions are produced through carbonyl-induced interfacial catalysis. The optimized HC anode displays good cycling stability, exhibiting a high reversible capacity (360.96 mAh g-1) at 30 mA g-1 and capacity retention of up to 94% after 500 cycles at 1 A g-1. Moreover, the full battery assembled with Na3V2(PO4)3/C demonstrates a stable cycling performance. These findings provide a fresh knowledge of the structural design of high-performance HC anode materials and the mechanism of sodium storage in HC.

Comprehensive evaluation of the impact of ionic liquid incorporation on the optical properties, Urbach energy, thin film morphology, and surface roughness of poly(vinyl chloride) based on ionic materials

Abstract A newly synthesis composite thin films of poly(vinyl chloride) has been refinement with ionic liquid, where PVC dissolved in THF with various concentrations of IL by casting method to form the composite thin films, without any reaction and IL dangles within PVC matrix. The thin films were examined by the diffusive reflectance device under the wavelength range (238–1300 nm). The XRD, EDX, and AFM techniques were utilized to discover the structure of the PVC matrix after additive IL. The XRD analysis illustrated the amorphous structure of the films, while the EDS analysis illustrated the main composition of pure PVC and composite PVC/IL. The optical properties and optical parameters were studied. The reflectance, extinction factor, transmittance, and imaginary dielectric constant declined, the absorption value was between (80–89 %), and the refractive index, real dielectric constant, and optical conductivity were increased. The indirect energy gap declined from 4.2 eV to 2.2 eV and the direct energy gap declined from 3.7 eV to 2.6 eV. The Urbach energy was increased from 2.09 eV to 15.45 eV revealing an increase in the disorders of electrons. The E d increased from 23.42 eV to 70.68 eV and E o increased from 7.00 eV to 10.88 eV. AFM analysis illustrated the roughness of the films increased after additive IL to the PVC Matrix from 1.08 nm to 4.45 nm and the root mean square of the particles ranged from 1.57 nm to 5.56 nm. The PVC composite thin films are utilized in solar cell and sodium-ion battery applications.

Overview of Inorganic Electrolytes for All-Solid-State Sodium Batteries.

All-solid-state sodium batteries (AS3B) emerged as a strong contender in the global electrochemical energy storage market as a replacement for current lithium-ion batteries (LIB) owing to their high abundance, low cost, high safety, high energy density, and long calendar life. Inorganic electrolytes (IEs) are highly preferred over the conventional liquid and solid polymer electrolytes for sodium-ion batteries (SIBs) due to their high ionic conductivity (∼10-2-10-4 S cm-1), wide potential window (∼5 V), and overall better battery performances. This review discusses the bird's eye view of the recent progress in inorganic electrolytes such as Na-β"-alumina, NASICON, sulfides, antipervoskites, borohydride-type electrolytes, etc. for AS3Bs. Current state-of-the-art inorganic electrolytes in correlation with their ionic conduction mechanism present challenges and interfacial characteristics that have been critically reviewed in this review. The current challenges associated with the present battery configuration are overlooked, and also the chemical and electrochemical stabilities are emphasized. The substantial solution based on ongoing electrolyte development and promising modification strategies are also suggested.

Boosting energy storage via the strong interaction between Cu2O clusters and carbon rich framework

Metal oxides have attracted tremendous attention because of their easy fabrication, high reversible voltage, and decent electrochemical capacity in lithium ion batteries. However, the conversion of their structure and the low electric conductivity always lead to a high polarization and poor cyclic stability. Herein, the strong interaction between Cu2O and porous carbon-rich framework is constructed through an in-situ synthesis method. Benefit from the synergistic effect derived from this interaction, the confined size and the high reversibility in chemical reaction of Cu2O are realized. In the hybrid system, the conjugated carbon skeleton with acetylene bond plays crucial role not only in building strong interactions, but also in interconnecting numerous Cu2O clusters for the transport of charge and storing of ions in a homogeneous solid. Hence, the composite material of porous carbon-rich material and Cu2O electrode delivers a decent capacity of 804 and 305 mAh g–1 in lithium and sodium ion batteries, respectively. These results suggest the great potential of such carbon framework/metal oxides composite material applied for high performance battery.

Electronic modification of NaCrO2 via Ni2+ substitution as efficient cathode for sodium-ion batteries

The feature of high theoretical capacity, long thermal stability, and low-cost fabrication offers the layered transition metal oxide NaCrO2 as an excellent candidate for sodium-ion batteries. Here, we show an effective method for electronic modulation of NaCrO2 by partial substitution of Cr3+ with low-valent Ni2+ to produce NaCr0.95Ni0.05O2 as an efficient cathode for these batteries. We found that Ni2+ substitution plays a critical role in the ionic character of transition metal-oxygen bonds, which increases the interlayer separation and thus improves sodium-ion diffusion kinetics. Furthermore, Ni2+ substitution reduces the deterioration of NaCrO2 throughout charge-discharge processes and thus boosts the cycle performance of the materials. The resultant NaCr0.95Ni0.05O2 cathode displays a remarkable rate performance with specific capacities of 91.2 mAh g-1 at 50 C and a high retention (~80%) of the initial capacity after cycling for 1,000 cycles at 10 C.

Engineering multiple heterogeneous Co/CoSe/MoSe2 embedded in carbon nanofibers with Co/Mo–Se–C bonding towards high performance sodium ion capacitors

MoSe2, as a representative two-dimensional transition selenide with a broad interlayer distance of 0.65 nm and a high theoretical capacity of 422 mAh g−1, is considered an optimal anode material for sodium-ion batteries (SIBs). However, its unsatisfactory electrical conduction and structural instability often lead to severe capacity decay during cycling, hindering its large-scale application in SIBs. To overcome these challenges, coupling heterostructures has been identified as an effective solution. The establishment of multiple heterointerfaces can minimize interface diffusion resistance, significantly enhancing ion and electron delivery dynamics compared to a single component. In this work, multiple heterogeneous Co/CoSe/MoSe2 uniformly distributed in carbon nanofibers (CNF) via Co/Mo–Se–C bonding are successfully synthesized using electrospinning and subsequent calcination. Importantly, the Co/CoSe and Co/MoSe2 heterointerfaces can greatly accelerate charge transfer and improve Na + adsorption capability compared to the CoSe/MoSe2 heterostructure, as corroborated by theoretical calculations. Given the high rate performance of Co/CoSe/MoSe2@CNF as an anode in SIBs (267.9 mAh g−1 at 5 A g−1), a rocking-chair sodium-ion capacitor (SIC) incorporating a Co/CoSe/MoSe2@CNF anode and a Na3V2(PO4)3 cathode is proposed, delivering high energy densities of 199.1 Wh kg−1 at 180 W kg−1 and 126.8 Wh kg−1 at 3280 W kg−1.

Engineering interleaved large and small Na4MnV(PO4)3@NC microspheres cathode towards high performance sodium ion batteries

The booming consumption of energy storage devices spontaneously accelerates the urgent development of robust cathode materials for sodium-ion batteries (SIBs). In view of this, the sodium superionic conductor Na4MnV(PO4)3 (NMVP), with considerable energy density of 425 Wh kg−1, has become the focus in SIB research. Despite this, the performance of NMVP is substantially compromised by Jahn-Teller distortion of Mn3+ ions in conjunction with inherently limited electronic conductivity. In order to address this limitation, this study introduces a series of N-doped carbon (NC) coated NMVP materials with interleaved large and small microsphere morphology. Of particular note, the optimized NMVP-NC2 shows the most excellent performance, maintaining a capacity of 65.7 mAh g−1 at 5C over 500 cycles. A full cell configuration employing an NMVP-NC2 cathode and a commercial hard carbon (HC) anode manifests commendable circular stability with a capacity of 80.7 mAh g−1 underneath 100 cycles at 1C, with an impressive 95.3 % capacity preservation. This distinctive architecture imparts the materials with a high tap density and a relatively low surface area, which is beneficial to the industrial employment. In addition, density functional theory (DFT) calculations indicate that the NC regulation significantly narrows the NMVP's bandgap and facilitates electron transfer, thereby accelerating electron/ion transport kinetics. The NC coating approach combined with large-scale spray drying tactic in this work offers a clear strategy to industrialize NMVP cathode towards high-performance SIBs.

Hybrid of sub-1 nm single-dispersed polyoxometalate and reduced graphene oxide as advanced anodes for durable sodium-ion batteries

Polyoxometalates (POMs) are widely thought as promising choices for sodium-ion batteries (SIBs) because of their refined molecular structures and excellent reversible multielectron charge-discharge behaviors. Nevertheless, the POMs anion clusters could dissolve in the electrolyte when attacked by solvent molecules, thus reducing active sites and affecting the actual performance of these POMs-based electrodes. Herein, we report the development of a new type of electrode system that produces single-dispersed POMs molecular cluster/polydopamine/reduced graphene oxide composites ({PMo12}/PDA@rGO) through a self-assembly method. PDA acts as the role of “killing two birds with one stone”. It not only works as the linker to promote the formation of stable and uniform monodisperse {PMo12} clusters on the rGO surface, but also prevents the POMs from desorbing and dissolving upon deep cycling test. As a consequence, when used as the anode material for SIBs, the obtained {PMo12}/PDA@rGO exhibits an admirable long-term cycling performance, for instance, it holds a high Na-storage capacity of 277.5 mAh g−1 with an average Coulomb efficiency up to 99.89 % over 2000 cycles at 1 A g−1. This work offers versatile possibilities for designing POMs-based composites and provides new insight into developing single dispersed POMs for advanced SIBs.

Electrochemical Behaviors and Doping Rules of NaRhO2 Cathode Materials for Sodium-Ion Batteries.

Sodium-ion batteries (SIBs) have great advantages for energy storage and conversion due to their low cost and large storage capacity. Currently, NaRhO2 is used as an electrode material for sodium-ion batteries. Doping first- and second-row transition metals has been carried out to comprehensively assess NaRhO2 as a cathode material. The geometric and electronic structures and electrochemical and doping behaviors of NaRhO2 cathode materials for SIBs have been investigated using density functional theory calculations. The results show that the bond lengths of Rh-O in NaRhO2 decrease during sodium deintercalation. The band gap of NaRhO2 with sodium extraction gradually reduces. The density of states of NaxRhO2 shows that the interaction between the Rh-4d and O-2p orbitals increases and the orbitals shift toward the right. The average intercalation voltage of NaxRhO2 cathode material increased from 2.7 to 3.9 eV. After doping with first- and second-row transition metal elements from Sc to Zn and Y to Cd, the changes in the band gaps of the doped NaRhO2 materials exhibit a W-type rule. In contrast, their magnetic moments show a reverse W-type rule. These findings on the pristine and doped NaRhO2 can provide theoretical guidance for the preparation of novel electrode materials suitable for sodium-ion batteries.

Iron-cobalt phosphide/nitrogen-doped carbon composite derived from prussian blue analogues as anode materials for sodium-ion batteries

Transition metal phosphides (TMPs) are recognized as attractive substitutes for lithium/sodium storage owing to their notable capacity and outstanding safety features. However, they face significant challenges in applications, particularly poor cycling stability and rapid capacity decay. In this study, we report a simple strategy utilizing dopamine-coated Prussian blue analogues as precursors to prepare bimetallic iron‑cobalt phosphide/nitrogen-doped carbon (Fe1-xCoxP/NC) composite materials via a one-step carbothermal phosphorization process. Benefiting from their nanostructured advantages and electronic interactions between Fe and Co sites, Fe0.17Co0.83P/NC, prepared by adjusting and optimizing the ion ratio, exhibits excellent rate capability and cycling performance as an anode material for sodium-ion batteries. It achieves a high specific capacity of 505.6 mAh g−1 at 0.5 A g−1. Even after 1000 cycles at a high current of 1 A g−1, the reversible specific capacity remains at 413.6 mAh g−1. Ex-situ XRD studies confirm that Fe0.17Co0.83P/NC stores Na+ via a conversion mechanism, where the crystalline CoP phase transforms into Na3P phase during the discharging process.