SO2 Capture Research Articles

Enhancing SO2 Sensing Performance of a Fuel Cell-Type Sensor with N-Doped Cu/CNT Aerogel Electrode and COF/Nafion Electrolyte.

Sulfur dioxide (SO2) is a common environmental pollutant with significant hazards. However, sensors for SO2 real-time monitoring at room temperature often face problems such as a poor response and sluggish recovery. In this work, a fuel cell-type gas sensor based on nitrogen-doped carbon nanotube (CNT) aerogels loaded with Cu particle electrode material and COF/Nafion composite electrolyte was developed, which exhibited excellent SO2 sensitivity and fast response/recovery. The aerogel scaffold provided a high specific surface area and high electrical conductivity, and Cu particles provided good catalytic activity to SO2. In addition, N doping further enhanced the SO2 capture capability and conductivity of the electrode material. For electrolyte construction, covalent organic framework (COF) nanosheets were synthesized by a bottom-up approach and blended with Nafion to prepare the COF/Nafion membrane; the composite membrane showed higher proton conductivity. Owing to these advantages, the fuel cell-type sensor exhibited an outstanding response of -3008.5 nA to 50 ppm of SO2 with a rapid response time (35 s) and recovery time (77 s). Moreover, the rigid nanochannels of COF nanosheets improved the water retention properties of the electrolyte; this will help to simplify the structure of fuel cell-type sensors and provide a significant stimulus for their miniaturization. Based on the great sensing performance, a fuel cell-type SO2 sensor is integrated into a portable detector and evaluated in the context of dynamic environmental monitoring. The results show that the fuel cell-type sensor with the carefully designed electrode and electrolyte will have great potential in environmental monitoring and safety assurance.

Enhanced SO2 and CO2 synergistic capture with reduced NH3 emissions using multi-stage solvent circulation process

NH3-based SO2 and CO2 synergistic capture technology shows promise in reducing the costs associated with current flue gas desulfurization and CO2 capture systems. However, it faces challenges such as NH3 slip and high energy consumption. In this study, we proposed an advanced Multi-Stage Solvent Circulation (MSC) process that incorporates a desulfurization-washing solution circulation, which involved partitioned absorption according to different functions of SO2 capture, CO2 capture, and NH3 emission control. The experimental results demonstrated that using desulfurization solution in place of water for washing reduced the NH3 emissions from the absorber and desorber by 10.6 % and 7.9 %, respectively. Additionally, the recovered NH3 enhanced SO2 capture, resulting in a 61.8 % decrease in SO2 emission concentration. A pilot-plant trial model for SO2 and CO2 synergistic capture was further developed using Aspen Plus. The impact of operational time and parameters on capture efficiency and energy consumption were analyzed. Under typical flue gas conditions, the process achieved SO2 capture efficiency of > 99 %, regeneration energy consumption of 2.42 GJ/t CO2, NH3 emissions of < 5 ppm. This study presents a novel approach for designing a SO2 and CO2 synergistic capture system, which has the potential to facilitate the economic and effective implementation of post-combustion flue gas pollutant control management and carbon emission reduction.

Engineering Nanoporous Polyaminal Networks for Superior SO2 Capture and Selectivity.

Designing adsorbent materials with high SO2 adsorption capacities and selectivity remains a significant challenge in flue gas desulfurization. This work focuses on developing two nitrogen-rich nanoporous polyaminal networks (NPANs), which demonstrate promising capabilities for SO2 adsorption and separation. Two nitrogen-rich nanoporous polyaminal networks, NPAN-5 and NPAN-6, were synthesized via a one-pot method using thiophene-2,5-dicarbaldehyde and furan-2,5-dicarbaldehyde with 1,4-bis(2,4-diamino-1,3,5-triazine)-benzene, respectively. The Brunauer-Emmett-Teller (BET) specific surface areas of NPANs range from 838 to 956 m2·g-1. At 298 K and pressures of 0.1 and 1.0 bar, NPAN-5, featuring thiophene units, demonstrates a SO2 adsorption uptake of 5.14 and 9.63 mmol·g-1, respectively, surpassing many previously reported materials. Furthermore, at room temperature, NPAN-6, containing furan moieties, exhibits unprecedented selectivity for SO2 over CO2 and N2, with ratios reaching up to 78 and 9321, respectively. Dynamic breakthrough experiments reveal that NPANs effectively separate SO2 from a ternary gas mixture comprising SO2, CO2, and N2 at concentrations of 0.2, 10, and 89.8%, respectively. Notably, NPAN-6 achieves a prolonged SO2 retention time of 218 min·g-1 and a saturation adsorption uptake of 0.42 mmol·g-1. The remarkable SO2 adsorption capacities and selectivities demonstrated by these nitrogen-rich nanoporous polyaminal networks underscore their potential to revolutionize industrial flue gas desulfurization.

Porphyrin-based schiff-base and aminal nitrogen-rich porous organic polymers for capture of SO2 and CO2

Due to its serious hazards to human health and the environment, the deep removal of sulfur dioxide (SO2) has been of great significance. Thus, it is critical to develop high efficient SO2 capture and sequestration materials in gas purification process. Herein, we reported two novel prophyrin-based nitrogen-rich porous organic polymers (POPs), PrPOA-BP and PrPSN-BP, constructed through the simple catalyst-free condensation reaction. Owing to the strong affinity to SO2 from the conjugate-electron macrocycles structure of prophyrin and nitrogen-rich porous networks, also the high porous structure, these two POPs demonstrated excellent SO2 capture and separation performance with the adsorption uptakes up to 18.2 mmol g−1 (273 K, 1 bar), 13.3 mmol g−1 (298 K, 1 bar), 1.68 mmol g−1 (298 K, 0.01 bar). This very competitive performance has far exceeded most of the prior reported nanoporous materials. Meanwhile, the IAST selectivities of SO2/CO2 (10/90, v/v) could reach 107.8 and 72.0 at 273 and 298 K, 1 bar. This study represents a new type prophyrin-based POPs materials and confirms the intrinsic potential for high efficiency SO2 capture and sequestration.

Study on combustion characteristics of crustacean biomass derived fuel coupled with in-situ capture of SO2 based on pulsed microwave radiation

Crustacean waste has great potential as fossil fuel substitution and efficient desulfurization to reduce pollutant emissions, but high moisture and poor quality restrict broad-scale utilization. This study used microwave radiation on crayfish shell to investigate the combustion characteristics and desulfurization effect in different atmospheres/pulse microwave cycle. Meanwhile, the structure evolution mechanism and molecular reaction pathways were revealed. The results show that crayfish shell derived fuel has a pleasurable combustion performance and sulfur fixation ability after microwave radiation in flue gas. The heat release of derived fuel increased by 29.9 % after five microwave cycle in flue gas, and activation energy decreased by 3.7 %. By contrast, the heat release increased by 17.4 % after five microwave cycle in inert gas, and activation energy increased by 39.3 %. Subsequently, the effect of microwave cycle times in flue gas on crayfish shell combustion and desulfurization performance was studied. The results show that the heat release of derived fuel gradually increases with microwave cycle. After seven microwave cycle, the derived fuel heat release and SO2 removal efficiency increased by 34.9 % and 44.4 %, respectively. The results establish the foundation for expanding the utilization pathway of crustacean waste and realizing the low-carbon energy transition.

Simultaneous capture of trace benzene and SO2 in a robust Ni(II)-pyrazolate framework

Benzene and SO2, coexisting as hazardous air pollutants in some cases, such as in coke oven emissions, have led to detrimental health and environmental effects. Physisorbents offer promise in capturing benzene and SO2, while their performance compromises at low concentration. Particularly, the simultaneous capture of trace benzene and SO2 under humid conditions is attractive but challenging. Here, we address this issue by constructing a robust pyrazolate metal-organic framework (MOF) sorbent featuring rich accessible Ni(II) sites with low affinity to water and good stability. This material achieves a high benzene uptake of 5.08 mmol g–1 at 10 Pa, surpassing previous benchmarks. More importantly, it exhibits an adsorption capacity of ~0.51 mmol g–1 for 10 ppm benzene and ~1.21 mmol g–1 for 250 ppm SO2 under 30% relative humidity. This work demonstrates that a pioneering MOF enables simultaneous capture of trace benzene and SO2, highlighting the potential of physisorbents for industrial effluent remediation, even in the presence of moisture.

Highly Selective SO2 Capture by Triazine-Functionalized Triphenylamine-Based Nanoporous Organic Polymers.

The emissions of sulfur dioxide (SO2) from combustion exhaust gases pose significant risks to public health and the environment due to their harmful effects. Therefore, the development of highly efficient adsorbent polymers capable of capturing SO2 with high capacity and selectivity has emerged as a critical challenge in recent years. However, existing polymers often exhibit poor SO2/CO2 and SO2/N2 selectivity. Herein, we report two triazine-functionalized triphenylamine-based nanoporous organic polymers (ANOP-6 and ANOP-7) that demonstrate both good SO2 uptake and high SO2/CO2 and SO2/N2 selectivity. These polymers were synthesized through cost-effective Friedel-Crafts reactions using cyanuric chloride, 3,6-diphenylaminecarbazole, and 2,2',7,7'-tetrakis(diphenylamino)-9,9'-spirobifluorene. The resultant ANOPs are composed of triazine and triphenylamine units and feature an ultramicroporous structure. Remarkably, ANOPs exhibit impressive adsorption capacities for SO2, with uptakes of approximately 3.31-3.72 mmol·g-1 at 0.1 bar, increasing to 9.52-9.94 mmol·g-1 at 1 bar. The static adsorption isotherms effectively illustrate the ability of ANOPs to separate SO2 from SO2/CO2 and SO2/N2 mixtures. At 298 K and 1 bar, ANOP-6 shows outstanding selectivity toward SO2/CO2 (248) and SO2/N2 (13146), surpassing all previously reported triazine-based nanoporous organic polymers. Additionally, dynamic breakthrough tests demonstrate the superior separation properties of ANOPs for SO2 from an SO2/CO2/N2 mixture. ANOPs exhibit a breakthrough time of 73.1 min·g-1 and a saturated SO2 capacity of 0.53 mmol·g-1. These results highlight the exceptional adsorption properties of ANOPs for SO2, indicating their promising potential for the highly efficient capture of SO2 from flue gas.

Highly selective separation of sulfur dioxide in a triphenylamine-based nanoporous organic polymer

The urgent need for effective SO2 capture materials has driven research into the development of novel nanoporous organic polymers (NOPs). Herein, we developed a triphenylamine-based nanoporous organic polymer, designated as ANOP-5, through the self-condensation of an AB2 triphenylamine monomer. The adsorption/separation properties of SO2 and CO2 are comparatively evaluated through the investigation of static gas adsorption isotherms. At 273 K and 100 kPa, ANOP-5 displays a high SO2 adsorption capacity of 399 cm3 g−1 and a high selectivity of 388 for SO2/CO2, with a molar ratio of SO2 to CO2 at 10/90. The exceptional performance of desulfurization is attributed to the strong interaction between ANOP-5 and SO2, in addition to the ultramicroporous structure. These findings are further supported by the dispersion-corrected density functional theory calculations. This study contributes valuable insights into the design and preparation of NOPs with high gas adsorption properties, particularly for addressing environmental pollution challenges related to SO2 emissions.

Porous Organic Polymers for Efficient and Selective SO2 Capture from CO2-rich Flue Gas.

The quest for effective technologies to reduce SO2 pollution is crucial due to its adverse effects on the environment and human health. Markedly, removing a ppm level of SO2 from CO2-containing waste gas is a persistent challenge, and current technologies suffer from low SO2/CO2 selectivity and energy-intensive regeneration processes. Here using the molecular building blocks approach and theoretical calculation, we constructed two porous organic polymers (POPs) encompassing pocket-like structures with exposed imidazole groups, promoting preferential interactions with SO2 from CO2-containing streams. Markedly, the evaluated POPs offer outstanding SO2/CO2 selectivity, high SO2 capacity, and an easy regeneration process, making it one of the best materials for SO2 capture. To gain better structural insights into the notable SO2 selectivity of the POPs, we used dynamic nuclear polarization NMR spectroscopy (DNP) and molecular modelling to probe the interactions between SO2 and POP adsorbents. The newly developed materials are poised to offer an energy-efficient and environment-friendly SO2 separation process while we are obliged to use fossil fuels for our energy needs.

Porous Organic Polymers for Efficient and Selective SO2 Capture from CO2‐rich Flue Gas

AbstractThe quest for effective technologies to reduce SO2 pollution is crucial due to its adverse effects on the environment and human health. Markedly, removing a ppm level of SO2 from CO2‐containing waste gas is a persistent challenge, and current technologies suffer from low SO2/CO2 selectivity and energy‐intensive regeneration processes. Here using the molecular building blocks approach and theoretical calculation, we constructed two porous organic polymers (POPs) encompassing pocket‐like structures with exposed imidazole groups, promoting preferential interactions with SO2 from CO2‐containing streams. Markedly, the evaluated POPs offer outstanding SO2/CO2 selectivity, high SO2 capacity, and an easy regeneration process, making it one of the best materials for SO2 capture. To gain better structural insights into the notable SO2 selectivity of the POPs, we used dynamic nuclear polarization NMR spectroscopy (DNP) and molecular modelling to probe the interactions between SO2 and POP adsorbents. The newly developed materials are poised to offer an energy‐efficient and environment‐friendly SO2 separation process while we are obliged to use fossil fuels for our energy needs.

Mild Strategy for the Preparation of Alkyl Sulfonyl Fluorides from Alkyl Bromides and Alcohols Using Photoredox Catalysis and Flow Chemistry.

Facile access to sp3-rich scaffolds containing a sulfonyl fluoride group is still limited. Herein, we describe a mild and scalable strategy for the preparation of alkyl sulfonyl fluorides from readily available alkyl bromides and alcohols using photoredox catalysis. This approach is based on halogen atom transfer (XAT), followed by SO2 capture and fluorination. The method features mild conditions enabling fast access to high-value derivatives and has been scaled up to 5 g using a continuous stirred tank reactor cascade.

Boosting SO2/CO2 separation with self-enhanced SO2 adsorption in a microporous metal-organic framework

Sulfur dioxide (SO2) stands out as a significant air pollutant, possessing the capacity to present considerable risks to human health. Governments worldwide have implemented strict regulations on emissions from industries. Separating SO2 and CO2 is essential for compliance with environmental standards, avoiding penalties, and promoting sustainable practices. Herein, we report a microporous metal–organic framework, CPL-11, which demonstrates a self-enhanced SO2 adsorption mechanism, significantly improving SO2/CO2 separation efficiency. Under the conditions of 0.1 bar and 298 K, CPL-11 exhibits an impressive SO2 adsorption capacity of 4.46 mmol g−1. Furthermore, at 1 bar and 298 K, CPL-11 exhibits a remarkable IAST selectivity for SO2/CO2, reaching a value of 132. This noteworthy enhancement in adsorption capacity and selectivity underscores the potential of CPL-11 as an effective material for addressing challenges related to SO2 capture and separation in gas mixtures. Theoretical calculations reveal that the outstanding performance of CPL-11 can be attributed to the synergistic interplay of host–guest interactions and guest–guest interactions. This unique mechanism holds promise for advancing the field of gas separation technology and contributing to a cleaner and healthier environment.

High-Performance Porous Organic Polymers for Environmental Remediation of Toxic Gases.

Sulfur dioxide (SO2) is a harmful acidic gas generated from power plants and fossil fuel combustion and represents a significant health risk and threat to the environment. Benzimidazole-linked polymers (BILPs) have emerged as a promising class of porous solid adsorbents for toxic gases because of their chemical and thermal stability as well as the chemical nature of the imidazole moiety. The performance of BILPs in SO2 capture was examined by synergistic experimental and theoretical studies. BILPs exhibit a significantly high SO2 uptake of up to 8.5 mmol g-1 at 298 K and 1.0 bar. The density functional theory (DFT) calculations predict that this high SO2 uptake is due to the dipole-dipole interactions between SO2 and the functionalized polymer frames through O2S(δ+)···N(δ-)-imine and O═S═O(δ-)···H(δ+)-aryl and intermolecular attraction between SO2 molecules (O═S═O(δ-)···S(δ+)O2). Moderate isosteric heats of adsorption (Qst ≈ 38 kJ mol-1) obtained from experimental SO2 uptake studies are well supported by the DFT calculations (≈40 kJ mol-1), which suggests physisorption processes enabling rapid adsorbent regeneration for reuse. Repeated adsorption experiments with almost identical SO2 uptake confirm the easy regeneration and robustness of BILPs. Moreover, BILPs possess very high SO2 adsorption selectivity at low concentration over carbon dioxide (CO2), methane (CH4), and nitrogen (N2): SO2/CO2, 19-24; SO2/CH4, 118-113; SO2/N2, 600-674. This study highlights the potential of BILPs in the desulfurization of flue gas or other gas mixtures through capturing trace levels of SO2.

Theoretical study on the capture of toxic gases by ionic liquids encapsulated in assembled belt[14[pyridine

In the current study, self-assembled belt[14]pyridine (BP) encapsulated IL (tetramethylammonium chloride (TMACl)) is theoretically explored to capture greenhouse gases (GHGs) at B3LYP-D3/6-311G(d,p) level of theory. The encapsulation of TMACl in assembled belt[14]pyridine is thermodynamically feasible as revealed through high interaction energy value of −50.7 kcal/mol. Moreover, the results of capturing of gas molecules (SO2, CO2, CO and CH4) show that attractive forces involved in capturing of gases are strong van der Waals forces i.e., London dispersion forces and electrostatic interactions. The synergic effect of self-assembled belts and ionic liquid results in significantly high interaction energy values ranging from −7.88 to −25.92 kcal/mol for capturing of gas molecules. Furthermore, the interaction between BP-TMACl and gas molecules is studied in detail through natural bond orbital (NBO) analysis. NBO results show the charge transfer between the fragments (BP-TMACl and gases) which is further validated through EDD analysis. The charge shifts towards all of the captured gas molecules but the most prominent change in NBO charges is shown by captured SO2. The successful charge transfer indicates better interaction in the designed systems. Additionally, the type and strength of interactions involved in the process of encapsulation is studied through quantum theory of atoms in molecules (QTAIM) and noncovalent interactions (NCI) analysis. NCI analysis clearly shows that gases are captured by BP-TMACl complex through strong van der Waals forces. However, in capturing of SO2, strong electrostatic attractive forces are also involved. The nature of attractive forces is confirmed through QTAIM analysis. Furthermore, the relation between recovery time and desorption energy of captured gas molecules has been studied. The strongest absorption for SO2 results in prolonged recovery time for it (as compared to the other gas molecules). AIMD analysis is performed to find the dynamical stability of assembled-belts before and after loading ionic liquids along with gases to be captured. These results reveal that assembled-belts are suitable for encapsulation of ionic liquids along with capturing of gases. Overall, the best results are shown for SO2 capture. The study intends to deliver valuable information on the important progress in the environmental-remediation field and we hope our work is going to inspire more investigators to provide novel research on such challenging tasks.

Facilely tuning the morphologies of tertiary amine-functionalized SBA-15 for optimizing selective SO2 capture

The amine-based materials pose high potential for the adsorption of sulfur dioxide (SO2). This work is aimed at modulating the morphologies of SBA-15 adsorbents by controlling the precursor self-assembly processes, for the sake of optimizing the utilization efficiency of amine species in the polytertiary amine (PTA)-functionalized SBA-15. It results that worm-like SBA-15 (WLS) material shows a better particle aspect ratio and well-defined pore structure, which helps to optimize the adsorption sites invoked by the preferable dispersion and exposure of PTA, thus amplifying the chemisorption of SO2 on the adsorbent. Consequently, the functionalized WLS-PTA adsorbent exhibits remarkable SO2 adsorption performance (15.43 mmol/g), exceptionally high selectivities of SO2/N2 (27522) and SO2/CO2 (652). Surprisingly, the desulfurization capacity can be further enhanced by the positive effect of the water vapor co-fed. It is unveiled that the whole SO2 adsorption process mainly follows the dual site Langmuir-Freundlich isotherm model and Bangham model. This work sheds light on the design of polymer-solid composite adsorbents for selective capture of SO2.

Mathematical modelling of a semi-dry SO2 scrubber based on a Lagrangian-Eulerian approach

Semi-dry desulfurization is an efficient means of SO2 removal from the effluent gases from electrolysis cells in aluminum smelters. These gases are at low temperature and contain low concentrations of SO2, as opposed to thermal power plants. The removal is carried out by injecting powdered alkaline sorbent, hydrated lime (solid particles), into the SO2-containing gas (gas phase) in the presence of humidity. The reaction is controlled by the adsorption of SO2 onto the surface of lime. This study involves the mathematical modelling of a lab-scale scrubber using a Lagrangian-Eulerian approach in order to analyze the desulfurization efficiency. The model was validated based on experimental data. A parametric study was carried out to investigate the effects of particle size, sorbent amount, and relative humidity (RH) on the desulfurization efficiency. The results show that the particle size is the most important parameter; as the particle size decreases, the desulfurization efficiency increases. However, using finer particles may increase the process cost. The loss in SO2 capture efficiency due to the use of coarser particle size could be compensated by increasing the relative humidity (RH) of the gas, another key parameter of the process.

Fabrication of metal oxides-based adsorbents for SO2 capture with equimolar adsorption

A series of novel porous metal oxides (MO, M = Mg, Ca, Ba, Mn and Zn) adsorbents were synthesized through simple thermal treatment of the corresponding metal sulfite for the remotion of sulfur dioxide (SO2). The obtained MO adsorbents were characterized by various techniques including scanning electron microscopy (SEM), thermal gravimetric analyzer (TGA), X-ray diffraction (XRD) and nitrogen adsorption studies. The results show that the SO2 adsorption capacity of manganese oxide (MnO) is much higher than that of other MO. And due to its highly dispersed and large specific surface area, especially its well-developed pore structure, equimolar adsorption of SO2 can be achieved for the first time among similar SO2 adsorbents. In addition, different sources of MnO were explored and it was found that the MnO obtained from the decomposition of MnSO3 had the highest SO2 adsorption capacity. Adsorption kinetic studies show that the reaction between MnO and SO2 conforms to the pseudo-second-order kinetic equation. Furthermore, it was found through seven-cycle experiments that the adsorption amount tended to stabilize in each of the following cycles, except for the first high temperature, which led to changes in the adsorbent and a decrease in cycling performance. This strategy has three advantages: one-step preparation at low temperatures, equimolar adsorption of SO2 as well as good reusability and selectivity.

Iron-catalyzed fluoroalkylative alkylsulfonylation of alkenes via radical-anion relay

Transition metal-catalyzed reductive difunctionalization of alkenes with alkyl halides is a powerful method for upgrading commodity chemicals into densely functionalized molecules. However, super stoichiometric amounts of metal reductant and the requirement of installing a directing group into alkenes to suppress the inherent β-H elimination bring great limitations to this type of reaction. We demonstrate herein that the difunctionalization of alkenes with two different alkyl halides is accessible via a radical-anion relay with Na2S2O4 as both reductant and sulfone-source. The Na2S2O4 together with the electron-shuttle catalyst is crucial to divert the mechanistic pathway toward the formation of alkyl sulfone anion instead of the previously reported alkylmetal intermediates. Mechanistic studies allow the identification of carbon-centered alkyl radical and sulfur-centered alkyl sulfone radical, which are in equilibrium via capture or extrusion of SO2 and could be converted to alkyl sulfone anion accelerated by iron electron-shuttle catalysis, leading to the observed high chemoselectivity.

Deep learning and big data mining for Metal–Organic frameworks with high performance for simultaneous desulfurization and carbon capture

Carbon capture and desulfurization of flue gases are crucial for the achievement of carbon neutrality and sustainable development. In this work, the “one-step” adsorption technology with high-performance metal–organic frameworks (MOFs) was proposed to simultaneously capture the SO2 and CO2. Four machine learning algorithms were used to predict the performance indicators (NCO2+SO2, SCO2+SO2/N2, and TSN) of MOFs, with Multi-Layer Perceptron Regression (MLPR) showing better performance (R2 = 0.93). To address sparse data of MOF chemical descriptors, we introduced the Deep Factorization Machines (DeepFM) model, outperforming MLPR with a higher R2 of 0.95. Then, sensitivity analysis was employed to find that the adsorption heat and porosity were the key factors for SO2 and CO2 capture performance of MOF, while the influence of open alkali metal sites also stood out. Furthermore, we established a kinetic model to batch simulate the breakthrough curves of TOP 1000 MOFs to investigate their dynamic adsorption separation performance for SO2/CO2/N2. The TOP 20 MOFs screened by the dynamic performance highly overlap with those screened by the static performance, with 76 % containing open alkali metal sites. This integrated approach of computational screening, machine learning, and dynamic analysis significantly advances the development of efficient MOF adsorbents for flue gas treatment.

Photoredox-Catalyzed Preparation of Sulfones Using Bis-Piperidine Sulfur Dioxide - An Underutilized Reagent for SO2 Transfer.

Sulfonyl groups are widely observed in biologically relevant molecules and consequently, SO2 capture is an increasingly attractive method to prepare these sulfonyl-containing compounds given the range of SO2 -surrogates now available as alternatives to using the neat gas. This, along with the advent of photoredox catalysis, has enabled mild radical capture of SO2 to emerge as an effective route to sulfonyl compounds. Here we report a photoredox-catalyzed cross-electrophile sulfonylation of aryl and alkyl bromides making use of a previously under-used amine-SO2 surrogate; bis(piperidine) sulfur dioxide (PIPSO). A broad selection of alkyl and aryl bromides were photocatalytically converted to their corresponding sulfinates and then trapped with various electrophiles in a one-pot multistep procedure to prepare sulfones and sulfonamides.