Snow Water Equivalent Retrieval Research Articles

GlobSnow v3.0 Northern Hemisphere snow water equivalent dataset

We describe the Northern Hemisphere terrestrial snow water equivalent (SWE) time series covering 1979–2018, containing daily, monthly and monthly bias-corrected SWE estimates. The GlobSnow v3.0 SWE dataset combines satellite-based passive microwave radiometer data (Nimbus-7 SMMR, DMSP SSM/I and DMSP SSMIS) with ground based synoptic snow depth observations using bayesian data assimilation, incorporating the HUT Snow Emission model. The original GlobSnow SWE retrieval methodology has been further developed and is presented in its current form in this publication. The described GlobSnow v3.0 monthly bias-corrected dataset was applied to provide continental scale estimates on the annual maximum snow mass and its trend during the period 1980 to 2018.

Snow Water Equivalent Retrieval Using Active and Passive Microwave Observations

AbstractThis paper implements a newly developed combined active and passive algorithm for the retrieval of snow water equivalent (SWE) by using three‐channel active and two‐channel passive observations. First, passive microwave observations at 19 and 37 GHz are used to determine the scattering albedo of snow. An a priori scattering albedo is obtained by averaging over time series observations. Second, 13.3 GHz is introduced to formulate a three‐channel (9.6, 13.3, and 17.2 GHz) radar algorithm which reduces effects of background scattering from the snow‐soil interface, and improves SWE retrieval. In the algorithm, the bicontinuous dense media radiative transfer (DMRT‐Bic) is used to compute look‐up tables (LUTs) of both radar backscatter and radiometer brightness temperatures (TBs) of the snowpack. To accelerate the retrieval, a parameterized model is derived from LUT by regression training, which links backscatter to the scattering albedo at 9.6 GHz or 13.3 GHz and to SWE. The volume scattering of snow is obtained by subtracting the background scattering from radar observations. SWE is then retrieved through a cost function that is guided by the a priori scattering albedo obtained from the passive microwave observations. The proposed algorithm, along with the active‐only version, is evaluated against the Finnish Nordic Snow Radar Experiment (NoSREx) data set measured in 2009–2013. The combined active‐passive algorithm achieves root mean square errors (RSME) less than 27 mm and correlation coefficients above 0.68 for 2009–2010, RMSE less than 21 mm and correlation above 0.85 for 2010–2011, and RMSE less than 40 mm and correlation above 0.38 for 2012–2013.

Impact of dynamic snow density on GlobSnow snow water equivalent retrieval accuracy

Abstract. Snow water equivalent (SWE) is an important variable in describing global seasonal snow cover. Traditionally, SWE has been measured manually at snow transects or using observations from weather stations. However, these measurements have a poor spatial coverage, and a good alternative to in situ measurements is to use spaceborne passive microwave observations, which can provide global coverage at daily timescales. The reliability and accuracy of SWE estimates made using spaceborne microwave radiometer data can be improved by assimilating radiometer observations with weather station snow depth observations as done in the GlobSnow SWE retrieval methodology. However, one possible source of uncertainty in the GlobSnow SWE retrieval approach is the constant snow density used in modelling emission of snow. In this paper, three versions of spatially and temporally varying snow density fields were implemented using snow transect data from Eurasia and Canada and automated snow observations from the United States. Snow density fields were used to post-process the baseline GlobSnow v.3.0 SWE product. Decadal snow density information, i.e. fields where snow density for each day of the year was taken as the mean calculated for the corresponding day over 10 years, was found to produce the best results. Overall, post-processing GlobSnow SWE retrieval with dynamic snow density information improved overestimation of small SWE values and underestimation of large SWE values, though underestimation of SWE values larger than 175 mm was still significant.

Evaluation and blending of ATMS and AMSR2 snow water equivalent retrievals over the conterminous United States

This study first compares two different passive microwave snow water equivalent (SWE) retrievals, namely the retrieval from the Suomi National Polar-orbiting Partnership (S-NPP) Advanced Technology Microwave Sounder (ATMS) and that from the Global Change Observation Mission – Water (GCOM-W1) Advanced Microwave Scanning Radiometer 2 (AMSR2); it further creates an optimal blending mechanism that merges the two retrievals with in situ observations from the Snow Telemetry (SNOTEL) and Cooperative Observer Program (COOP) networks. The assessments of the two products are done over conterminous United States (CONUS) for the snow seasons (November–June) of the water years 2017–2019 using in situ data and the SNOw Data Assimilation System (SNODAS) SWE analysis. Both satellite products tend to underestimate SWE. Between the two, AMSR2 retrieval outperforms in terms of correlation with observations and depth of saturation, but it exhibits a distinctive, seasonally varying bias that is not seen in ATMS retrieval. The negative bias over the early snow season, as further analysis indicates, most likely stems from AMSR2 retrieval's use of a high frequency channel (i.e., 89 GHz) for shallow snow detection, while the impact of differing assumptions of snow density is marginal. The blending scheme, developed on the basis of the validation experiment, features a histogram-based bias correction as a supplement to optimal interpolation. Cross-validation suggests that interpolated station product without the satellite background broadly underperforms the blended in situ-satellite product, confirming the utility of the satellite retrievals. Furthermore, the a priori bias correction mechanism is shown to be effective in mitigating large fluctuations in bias. Finally, the bias-corrected, blended in situ-satellite product performs comparably or even favorably against SNODAS over many parts of the CONUS, with important implications for joint use of satellite and in situ observations for hydrological monitoring and forecasting.

Considerations for Ku-Band Radar Retrieval of Snow Water Equivalent at Mid-Latitude Ontario Agricultural Sites

Mid-latitude snow is understudied compared to snow in the northern high latitudes despite its importance as a source of freshwater to this economically significant region. The mid-latitudes provide opportunity to understand the influence on SWE retrievals of ice and vegetation, conditions which may encroach the north with a warming climate. Successful retrieval of SWE and snow depth was demonstrated using the Microwave Emission Model of Layered Snowpacks, adapted for backscattering (MEMLS3&a) with multi-angle Ku-band UWScat snow observations (VV polarization), of agricultural fields in Maryhill and Englehart, Ontario. A single-layer parameterization provided best results for Maryhill (RMSE of 21.9 mm SWE) while a dual-layer parameterization provided best results for Englehart (RMSE of 24.6 mm). Accounting for soil effects using a soil-subtraction method improved RMSE by up to 6.3 mm SWE. Retrievals were repeated with in situ snow depths improving accuracy at both sites (RMSE = 12.0 and 10.9 mm SWE for Maryhill and Englehart, respectively). Observations containing ice lenses and partially buried vegetation yielded a retrieval accuracy of RMSE = 60.4 mm which improved with in situ snow depths (RMSE = 21.1 mm SWE). These results compared favorably with the often-cited accuracy requirement of RMSE = 30 mm SWE.

Validation of remotely sensed estimates of snow water equivalent using multiple reference datasets from the middle and high latitudes of China

A key variable describing the mass of seasonal snow cover is snow water equivalent (SWE), which plays an important role in hydrological applications, weather forecasting and land surface process simulations. In this paper, the accuracy of an SWE product, GlobSnow-2, which combines microwave satellite data and in situ measurements, is assessed using three reference evaluation datasets north of 35°N in China. The GlobSnow-2 estimates are also compared with stand-alone satellite products (AMSR2, Chang and FY-3D SWE). The overall unbiased root mean square error (RMSE) and bias of the GlobSnow-2 SWE product validated with three reference datasets are 17.4 mm and 11.2 mm, respectively, which outperforms the AMSR2 SWE (39.3 mm and 37.3 mm, respectively) and Chang SWE (57.5 mm and 46.2 mm, respectively) products. The FY-3D SWE product performs better than the GlobSnow-2 estimate for shallow snow (SWE < 50 mm) and tends to underestimate snow cover, particularly when SWE exceeds 80 mm. A retrieval sensitivity analysis against land cover types shows that the highest SWE uncertainties for GlobSnow-2 are exhibited in grassland (unbiased RMSE, 27.8 mm), and the most serious overestimation occurs in forested areas (bias, 23.6 mm). The GlobSnow-2 performances at various elevations show an increasing bias trend, ranging from 5 to 61 mm with increasing elevation. The GlobSnow-2 estimate analyses under different snow regimes show that the GlobSnow-2 SWE product performs best in taiga snow, with high uncertainties (unbiased RMSE, 28.3 mm) in prairie snow and serious overestimations (bias, 23.2 mm) for alpine snow. The results of this study demonstrate that the GlobSnow-2 assimilation approach tends to overestimate SWE in China. One of the major reasons that overestimations occur is that the GlobSnow-2 SWE retrieval scheme utilizes a fixed density of 240 kg/m3, which is larger than the average value derived from ground measurements for China (180 kg/m3), which undoubtedly contributes to the observed SWE overestimation. Another reason is that forest effects on satellite signals remain challenging for SWE estimations in the GlobSnow-2 assimilation system. The retrieval errors in prairie and alpine are also higher than others due to the snowpack stratigraphy and complex topography. The GlobSnow-2 SWE product performance is evaluated over China in this study, and the major factors that affect the assimilation scheme accuracy are determined. These results will provide a reference to improve the GlobSnow-2 SWE product in future work.

A Novel Approach for the Snow Water Equivalent Retrieval Using X-Band Polarimetric Synthetic Aperture Radar Data

In this article, an algorithm for snow depth (SD) and snow water equivalent (SWE) retrieval is proposed based on a polarimetric synthetic aperture radar (SAR) decomposition model and field measured snow data. The field campaigns were conducted at the Dhundi observatory (in the Indian Himalaya) in January 2016 and 2018. The field-measured data are used here to build a linear regression between wetness ( w) and the imaginary part of the snow permittivity ( ε <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">''</sup> ), and the validation of retrieved SD and SWE. The snow density ( ρ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">s</sub> ) and w are calculated with a generalized volume parameter derived using a theoretical model and SAR data (coherency matrix). These snow parameters and the field-based regression relating w and ε <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">''</sup> are eventually used for the SD and SWE retrieval. Three TerraSAR-X scenes of the quad-polarization X-band data acquired in January 2016 are used to study the effect of the snow conditions on the accuracy of the proposed algorithm. The mean absolute error (MAE), root-mean-square error (RMSE), and index of agreement (IOA) for SD are 4.84 cm, 5.12 cm, and 0.71, respectively. On the other hand, for SWE, it is 1.42 cm, 1.53 cm, and 0.71, respectively.

Evaluating the Preconditions of Two Remote Sensing SWE Retrieval Algorithms over the US

A large amount of fresh water resources are stored in the snowpack, which is the primary source of water for streamflow in many places at middle-to-high latitude areas. Therefore, snow water equivalent (SWE) is a key parameter in the water cycle. Active and passive microwave remote sensing methods have been used to retrieve SWE due to relatively poor resolution of current in situ interpolated maps with good accuracy. However, estimation of SWE has proved challenging, despite several decades of efforts to develop retrieval approaches. Active sensors provide higher-resolution observations. Two recent promising retrieval algorithms using active data are dual frequency dual polarization backscattered power and differential interferometry. These retrieval algorithms have some restrictions on snow characteristics, the environment, and instrument properties. The restrictions limit the snow that is suitable for the specific retrieval algorithm. In order to better understand how much of the snowpack satisfies the precondition of these retrieval approaches, we use a 4 km gridded snowpack product over the contiguous US for years 1997 and 2015. We use a simple scattering model to simulate the scattering characteristics of snow. The snow property maps, simulated scattering characteristics of snow, and environmental conditions are used to filter the suitable snow for each retrieval algorithm. We show that snow wetness and vegetation coverage are the two main limiting conditions for these retrieval algorithms. We show that 39% and 44% of the grid-points with snow satisfy the preconditions of dual polarization dual frequency retrieval algorithms at 13.5 GHz (one of the recommended frequencies for this algorithm in the literature) in 1997 and 2015, respectively. The most important limiting factors for dual polarization dual frequency retrieval method are dryness of snow, penetration depth, and vegetation-free constraints. The backscattered power in dual polarization dual frequency method is more sensitive to snow density and grain radius rather than to snow depth. We also show that 55% and 53% of the grid-points with snow satisfy the precondition of differential interferometry retrieval algorithms at 1 GHz (one of the recommended frequencies for this algorithm in the literature) in 1997 and 2015, respectively. The most important precondition-limiting factors for differential interferometry are dryness of snow and vegetation-free constraints. The differential interferometry phase retrieval algorithm is equally sensitive to snow height and snow density variations and is independent of snow grain radius.

Retrieval of Snow Depth and Snow Water Equivalent Using Dual Polarization SAR Data

This paper deals with the retrieval of snow depth (SD) and snow water equivalent (SWE) using dual-polarization (HH-VV) synthetic aperture radar (SAR) data. The effect of different snowpack conditions on the SD and SWE inversion accuracy was demonstrated by using three TerraSAR-X acquisitions. The algorithm is based on the relationship between the SD, the co-polar phase difference (CPD), and particle anisotropy. The Dhundi observatory in the Indian Himalaya was selected as a validation test site where a field campaign was conducted for ground truth measurements in January 2016. Using the field measured values of the snow parameters, the particle anisotropy has been optimized and provided as an input to the SD retrieval algorithm. A spatially variable snow density ( ρ s ) was used for the estimation of the SWE, and a temporal resolution of 90 m was achieved in the inversion process. When the retrieval accuracy was tested for different snowpack conditions, it was found that the proposed algorithm shows good accuracy for recrystallized dry snowpack without distinct layering and low wetness (w). The statistical indices, namely, the root mean square error (RMSE), the mean absolute difference (MAD), and percentage error (PE), were used for the accuracy assessment. The algorithm was able to retrieve SD with an average MAE and RMSE of 6.83 cm and 7.88 cm, respectively. The average MAE and RMSE values for SWE were 17.32 mm and 21.41 mm, respectively. The best case PE in the SD and the SWE retrieval were 8.22 cm and 18.85 mm, respectively.

Simulating the Influence of Temperature on Microwave Transmissivity of Trees During Winter Observed by Spaceborne Microwave Radiometery

Forest transmissivity is a key parameter for understanding spaceborne and airborne observations of the Earth's land surface because not only does it influences the proportion of subcanopy upwelling microwave emission penetrating through the forest canopy, it also controls the forest thermal emission. In frozen winter conditions, our previous study has indicated that observed microwave transmissivity of trees is also strongly influenced by temperature. This follow-on study uses ground-based radiometer observations, advanced microwave scanning radiometer 2 (AMSR2) observations, and model simulation to evaluate how this temperature-transmissivity relationship affects spaceborne passive microwave (PM) snow observations. A model is developed to simulate the relationship between tree transmissivity and air temperature. The R2 of the model is 0.85 (0.81) with a root mean square error (RMSE) of 0.03 (0.03) at the 18.7 (36.5) GHz channels, respectively. We find that this temperature-transmissivity relationship has a significant influence on the Tb of the tree, which influences both ground-based radiometer and spaceborne AMSR2 observations. The influence of the temperature-transmissivity relationship on upwelling ground emission is frequency dependent, demonstrating that the findings have implications for frequency difference based approaches for PM snow depth and snow water equivalent retrievals which observe snow-covered landscapes, including boreal forests, at air temperatures below freezing. This effect should therefore be accounted for in frequency difference or ratio approaches of snow accumulation retrievals.

Effect of snow microstructure variability on Ku-band radar snow water equivalent retrievals

Abstract. Spatial variability in snowpack properties negatively impacts our capacity to make direct measurements of snow water equivalent (SWE) using satellites. A comprehensive data set of snow microstructure (94 profiles at 36 sites) and snow layer thickness (9000 vertical profiles across nine trenches) collected over two winters at Trail Valley Creek, NWT, Canada, was applied in synthetic radiative transfer experiments. This allowed for robust assessment of the impact of estimation accuracy of unknown snow microstructural characteristics on the viability of SWE retrievals. Depth hoar layer thickness varied over the shortest horizontal distances, controlled by subnivean vegetation and topography, while variability in total snowpack thickness approximated that of wind slab layers. Mean horizontal correlation lengths of layer thickness were less than a metre for all layers. Depth hoar was consistently ∼30 % of total depth, and with increasing total depth the proportion of wind slab increased at the expense of the decreasing surface snow layer. Distinct differences were evident between distributions of layer properties; a single median value represented density and specific surface area (SSA) of each layer well. Spatial variability in microstructure of depth hoar layers dominated SWE retrieval errors. A depth hoar SSA estimate of around 7 % under the median value was needed to accurately retrieve SWE. In shallow snowpacks &lt;0.6 m, depth hoar SSA estimates of ±5 %–10 % around the optimal retrieval SSA allowed SWE retrievals within a tolerance of ±30 mm. Where snowpacks were deeper than ∼30 cm, accurate values of representative SSA for depth hoar became critical as retrieval errors were exceeded if the median depth hoar SSA was applied.

Inter-Sensor Calibration between HY-2B and AMSR2 Passive Microwave Data in Land Surface and First Result for Snow Water Equivalent Retrieval.

The self-designed HaiYang-2B (HY-2B) satellite was launched on 24 October 2018 in China at 22:57 UT in a 99.34° inclination sun-synchronous orbit. The Scanning Microwave Radiometer (SMR) on the core observatory has the capability to provide near-real-time multi-channel brightness temperature (Tb) observations, which are designed mainly for improving the level of marine forecasting and monitoring, serving the development and utilization of marine resources. After internal calibration and ocean calibration, the first effort to retrieve land surface snow parameters was performed in this study, which obtained extremely low accuracy both in snow extent and snow mass. Accordingly, land inter-sensor calibration was carried out between SMR and the Advanced Microwave Scanning Radiometer 2 (AMSR2) in order to broaden the research and application of SMR data on the Earth’s land surface. Finally, we evaluated the consistency of the snow extent and snow mass derived from the initial and land-calibrated SMR data. The results indicated that a systematic SMR cold deviation whose magnitude depends on the channel is present for all the compared channels. After intercalibration, the conformity of the snow extent and snow mass were substantially improved compared to before; the relative bias of the snow extent and snow mass decreased from −49.97% to 2.97% and from −51.71% to 3.01%, respectively.

Retrieval of Snow Water Equivalent, Liquid Water Content, and Snow Height of Dry and Wet Snow by Combining GPS Signal Attenuation and Time Delay

AbstractFor numerous hydrological applications, information on snow water equivalent (SWE) and snow liquid water content (LWC) are fundamental. In situ data are much needed for the validation of model and remote sensing products; however, they are often scarce, invasive, expensive, or labor‐intense. We developed a novel nondestructive approach based on Global Positioning System (GPS) signals to derive SWE, snow height (HS), and LWC simultaneously using one sensor setup only. We installed two low‐cost GPS sensors at the high‐alpine site Weissfluhjoch (Switzerland) and processed data for three entire winter seasons between October 2015 and July 2018. One antenna was mounted on a pole, being permanently snow‐free; the other one was placed on the ground and hence seasonally covered by snow. While SWE can be derived by exploiting GPS carrier phases for dry‐snow conditions, the GPS signals are increasingly delayed and attenuated under wet snow. Therefore, we combined carrier phase and signal strength information, dielectric models, and simple snow densification approaches to jointly derive SWE, HS, and LWC. The agreement with the validation measurements was very good, even for large values of SWE (&gt;1,000 mm) and HS (&gt; 3 m). Regarding SWE, the agreement (root‐mean‐square error (RMSE); coefficient of determination (R2)) for dry snow (41 mm; 0.99) was very high and slightly better than for wet snow (73 mm; 0.93). Regarding HS, the agreement was even better and almost equally good for dry (0.13 m; 0.98) and wet snow (0.14 m; 0.95). The approach presented is suited to establish sensor networks that may improve the spatial and temporal resolution of snow data in remote areas.

Quantifying Snow Mass Mission Concept Trade-Offs Using an Observing System Simulation Experiment

AbstractBecause of its location, Canada is particularly affected by snow processes and their impact on the atmosphere and hydrosphere. Yet, snow mass observations that are ongoing, global, frequent (1–5 days), and at high enough spatial resolution (kilometer scale) for assimilation within operational prediction systems are presently not available. Recently, Environment and Climate Change Canada (ECCC) partnered with the Canadian Space Agency (CSA) to initiate a radar-focused snow mission concept study to define spaceborne technological solutions to this observational gap. In this context, an Observing System Simulation Experiment (OSSE) was performed to determine the impact of sensor configuration, snow water equivalent (SWE) retrieval performance, and snow wet/dry state on snow analyses from the Canadian Land Data Assimilation System (CaLDAS). The synthetic experiment shows that snow analyses are strongly sensitive to revisit frequency since more frequent assimilation leads to a more constrained land surface model. The greatest reduction in spatial (temporal) bias is from a 1-day revisit frequency with a 91% (93%) improvement. Temporal standard deviation of the error (STDE) is mostly reduced by a greater retrieval accuracy with a 65% improvement, while a 1-day revisit reduces the temporal STDE by 66%. The inability to detect SWE under wet snow conditions is particularly impactful during the spring meltdown, with an increase in spatial RMSE of up to 50 mm. Wet snow does not affect the domain-wide annual maximum SWE nor the timing of end-of-season snowmelt timing in this case, indicating that radar measurements, although uncertain during melting events, are very useful in adding skill to snow analyses.

Observations of a Coniferous Forest at 9.6 and 17.2 GHz: Implications for SWE Retrievals

UWScat, a ground-based Ku- and X-band scatterometer, was used to compare forested and non-forested landscapes in a terrestrial snow accumulation environment as part of the NASA SnowEx17 field campaign. Field observations from Trail Valley Creek, Northwest Territories; Tobermory, Ontario; and the Canadian Snow and Ice Experiment (CASIX) campaign in Churchill, Manitoba, were also included. Limited sensitivity to snow was observed at 9.6 GHz, while the forest canopy attenuated the signal from sub-canopy snow at 17.2 GHz. Forested landscapes were distinguishable using the volume scattering component of the Freeman–Durden three-component decomposition model by applying a threshold in which values ≥50% indicated forested landscape. It is suggested that the volume scattering component of the decomposition can be used in current snow water equivalent (SWE) retrieval algorithms in place of the forest cover fraction (FF), which is an optical surrogate for microwave scattering and relies on ancillary data. The performance of the volume scattering component of the decomposition was similar to that of FF when used in a retrieval scheme. The primary benefit of this method is that it provides a current, real-time estimate of the forest state, it automatically accounts for the incidence angle and canopy structure, and it provides coincident information on the forest canopy without the use of ancillary data or modeling, which is especially important in remote regions. Additionally, it enables the estimation of forest canopy transmissivity without ancillary data. This study also demonstrates the use of these frequencies in a forest canopy application, and the use of the Freeman–Durden three-component decomposition on scatterometer observations in a terrestrial snow accumulation environment.

Forward and Inverse Radar Modeling of Terrestrial Snow Using SnowSAR Data

In this paper, we develop a radar snow water equivalent (SWE) retrieval algorithm based on a parameterized forward model of bicontinuous dense media radiative transfer (Bic-DMRT). The algorithm is based on retrieving the absorption loss of the snowpack which is directly proportional to the SWE. In the algorithm, Bic-DMRT is first applied to generate a lookup table (LUT) of snowpack backscattering at X- and Ku-band. Regression training is applied to the LUT to transform the dual-frequency backscatter into functions of two parameters: the scattering albedo at X-band and SWE. The background scattering is subtracted from the SnowSAR data to give the volume scattering of snow. Classification of SnowSAR data is applied to provide a priori information. Based on the obtained volume scattering and the priori information, a cost function is established to find SWE. Performance of the retrieval algorithm was tested using three sets of airborne SnowSAR data acquired over mixed areas in Finland and open tundra landscape in Canada. It is shown that the retrieval algorithm has a root-mean-square error below 30 mm of SWE and a correlation coefficient above 0.64.

Estimating snow-cover trends from space

Extensive evidence reveals that Earth’s snow cover is declining, but our ability to monitor trends in mountain regions is limited. New satellite missions with robust snow water equivalent retrievals are needed to fill this gap.

The influence of snow microstructure on dual-frequency radar measurements in a tundra environment

Recent advancement in the understanding of snow-microwave interactions has helped to isolate the considerable potential for radar-based retrieval of snow water equivalent (SWE). There are however, few datasets available to address spatial uncertainties, such as the influence of snow microstructure, at scales relevant to space-borne application. In this study we introduce measurements from SnowSAR, an airborne, dual-frequency (9.6 and 17.2 GHz) synthetic aperture radar (SAR), to evaluate high resolution (10 m) backscatter within a snow-covered tundra basin. Coincident in situ surveys at two sites characterize a generally thin snowpack (50 cm) interspersed with deeper drift features. Structure of the snowpack is found to be predominantly wind slab (65%) with smaller proportions of depth hoar underlain (35%). Objective estimates of snow microstructure (exponential correlation length; lex), show the slab layers to be 2.8 times smaller than the basal depth hoar. In situ measurements are used to parametrize the Microwave Emission Model of Layered Snowpacks (MEMLS3&a) and compare against collocated SnowSAR backscatter. The evaluation shows a scaling factor (ϕ) between 1.37 and 1.08, when applied to input of lex, minimizes MEMLS root mean squared error to <1.1 dB. Model sensitivity experiments demonstrate contrasting contributions from wind slab and depth hoar components, where wind rounded microstructures are identified as a strong control on observed backscatter. Weak sensitivity of SnowSAR to spatial variations in SWE is explained by the smaller contributing microstructures of the wind slab.

A &lt;inline-formula&gt; &lt;tex-math notation="LaTeX"&gt;$K_{{u}}$ &lt;/tex-math&gt; &lt;/inline-formula&gt;-Band CMOS FMCW Radar Transceiver for Snowpack Remote Sensing

This paper presents a $K_{u}$ -band (14–16 GHz) CMOS frequency-modulated continuous-wave (FMCW) radar transceiver developed to measure dry-snow depth for water management purposes and to aid in retrieval of snow water equivalent. An on-chip direct digital frequency synthesizer and digital-to-analog converter digitally generates a chirping waveform which then drives a ring oscillator-based $K_{u}$ -Band phase-locked loop to provide the final $K_{u}$ -band FMCW signal. Employing a ring oscillator as opposed to a tuned inductor-based oscillator (LC-VCO) allows the radar to achieve wide chirp bandwidth resulting in a higher axial resolution (7.5 cm), which is needed to accurately quantify the snowpack profile. The demonstrated radar chip is fabricated in a 65-nm CMOS process. The chip consumes 252.4 mW of power under 1.1-V supply, making its payload requirements suitable for observations from a small unmanned aerial vehicle.

Retrieval of Effective Correlation Length and Snow Water Equivalent from Radar and Passive Microwave Measurements

Current methods for retrieving SWE (snow water equivalent) from space rely on passive microwave sensors. Observations are limited by poor spatial resolution, ambiguities related to separation of snow microstructural properties from the total snow mass, and signal saturation when snow is deep (~&gt;80 cm). The use of SAR (Synthetic Aperture Radar) at suitable frequencies has been suggested as a potential observation method to overcome the coarse resolution of passive microwave sensors. Nevertheless, suitable sensors operating from space are, up to now, unavailable. Active microwave retrievals suffer, however, from the same difficulties as the passive case in separating impacts of scattering efficiency from those of snow mass. In this study, we explore the potential of applying active (radar) and passive (radiometer) microwave observations in tandem, by using a dataset of co-incident tower-based active and passive microwave observations and detailed in situ data from a test site in Northern Finland. The dataset spans four winter seasons with daily coverage. In order to quantify the temporal variability of snow microstructure, we derive an effective correlation length for the snowpack (treated as a single layer), which matches the simulated microwave response of a semi-empirical radiative transfer model to observations. This effective parameter is derived from radiometer and radar observations at different frequencies and frequency combinations (10.2, 13.3 and 16.7 GHz for radar; 10.65, 18.7 and 37 GHz for radiometer). Under dry snow conditions, correlations are found between the effective correlation length retrieved from active and passive measurements. Consequently, the derived effective correlation length from passive microwave observations is applied to parameterize the retrieval of SWE using radar, improving retrieval skill compared to a case with no prior knowledge of snow-scattering efficiency. The same concept can be applied to future radar satellite mission concepts focused on retrieving SWE, exploiting existing methods for retrieval of snow microstructural parameters, as employed within the ESA (European Space Agency) GlobSnow SWE product. Using radar alone, a seasonally optimized value of effective correlation length to parameterize retrievals of SWE was sufficient to provide an accuracy of &lt;25 mm (unbiased) Root-Mean Square Error using certain frequency combinations. A temporally dynamic value, derived from e.g., physical snow models, is necessary to further improve retrieval skill, in particular for snow regimes with larger temporal variability in snow microstructure and a more pronounced layered structure.