Smart Grid Distribution System Research Articles

Correction to: Performance analysis of smart grid distribution system using global EV charging station as smart load based on automatic variac transformer

Correction to: Performance analysis of smart grid distribution system using global EV charging station as smart load based on automatic variac transformer

Techno-economic evaluation of meshed distribution network planning with load growth and expansion with multiple assets across multiple planning horizons

The smart grid paradigm has ushered in an era where modern distribution systems are expected to be both robust and interconnected in topology. This paper presents a techno-economic-based sustainable planning (TESP) strategy, which can be used as a planning framework for linked distribution systems, seeking to discover a realistic solution among competing criteria of diverse genres. In this comparative analysis-based study, three voltage stability assessment indices—VSA_A, VSA_B, and VSA_W—and a loss minimization condition (LMC)-based framework are used in the initial stage to achieve optimal distributed generation (DG)-based asset optimization for siting, followed by sizing. The respective techniques are evaluated across two variants of multiple load growth horizons spread across 10 years. The suggested TESP technique is tested on two variants of a mesh-configured microgrid (MCMG) with varied load growth scenarios. One variant considers a 65-bus MG with a fixed load growth of 2.7% across two load growth horizons. The other variant considers a 75-bus MG with varied load growth across four load growth horizons, encapsulating an expansion-based planning perspective. The numerical results of the suggested TESP approach in a comparative study demonstrate its effectiveness, and it can be used by researchers and planning engineers as a planning framework for interconnected distribution tools across multiple planning horizons. The proposed study would contribute to enhancing the robustness and interconnectivity of smart grid distribution systems. This dual focus could lead to more cost-effective and reliable power distribution systems.

Self-triggered distributed filtering for sensor networks with topology switching via a multi-step ahead approach

In this paper, self-triggered filtering is developed for a class of distributed filtering networks (DFNs) with topology switching. To save unnecessary transmission and computation effort, a self-triggering policy (STP) is developed to avoid monitoring and judgments at every sampling moment, and it simultaneously decides when to get measurements and release the latest estimation to neighbor nodes. Specifically, the STP can predict the next trigger interval according to the local information and the neighbors’ latest data at the triggering moment. However, under STP, a DFN will subject to asynchronous communication due to each filter triggering independently. Moreover, STP and DFN topology switching do contaminate the estimation accuracy. To deal with these challenges, a co-design of STP and distributed filters are developed to achieve good filtering performance with less design conservatism via a multi-step ahead approach. Finally, a numerical example and a smart grid distribution system are presented to demonstrate the effectiveness and applicability of the developed approach.

Bi-Level Multi-Objective Planning Model of Solar PV - Battery Storage-Based Ders in Smart Grid Distribution System

The Bi-level Multi-Objective Planning Model of Solar PV-Battery Storage-Based DERS in Smart Grid Distribution System is a research paper that proposes a planning model for the implementation of distributed energy resources (DERs) in a smart grid distribution system. The model is designed to optimize the deployment of solar PV and battery storage systems in the grid, while taking into account various technical, economic, and environmental factors. The proposed planning model is based on a bi-level multi-objective optimization approach, which considers both the objectives of the utility and the objectives of the DER owners. The upper-level objective is to minimize the total cost of energy supply to the grid, while the lower-level objective is to maximize the revenue of the DER owners. The model is implemented using a genetic algorithm, which is used to search for the optimal solution.
 The model is also capable of considering the uncertainties associated with solar PV and battery storage systems, such as weather conditions and battery degradation. The results of the study show that the proposed planning model can effectively optimize the deployment of solar PV and battery storage systems in a smart grid distribution system. The model is also shown to be robust to various uncertainties associated with DERs, such as weather conditions and battery degradation. Overall, the proposed planning model provides a valuable tool for the implementation of distributed energy resources in a smart grid distribution system. By optimizing the deployment of DERs, the model can help to reduce the cost of energy supply, while also improving the reliability and environmental performance of the grid.
 This project describes the multi objective battery sizing and storage system for grid connected system using renewable energy solar and wind system.

Bi-Level Multi-Objective Planning Model of Solar PV-Battery Storage-Based DERs in Smart Grid Distribution System

This paper presents a novel bi-level multi-objective model for planning solar PV-battery storage (PV-BS) based DERs in Smart grid distribution system (SGDS). The planning of Solar PV and battery storage (BS) in the distribution system presents severe complexities for the system planner due to their inherent attributes. The detailed analysis considering all three planning aspects, namely technical, economics, and environmental, is presented, assisting in the efficient and reliable planning operation. The four test cases are formulated based upon the life cycle cost, unserved energy, penetration level, and social welfare. The <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">level-1</i> proceeds with evaluating the DERs sizing along with penetration level and serves as an input to <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">level-2</i> for computing the optimal placement for DERs. The proposed model is implemented on the IEEE-33 bus distribution system and solved using Butterfly-PSO (BF-PSO) algorithm. The detailed parametric and sensitivity analysis presented may aid the system planners in terms of planning preview. The simulation results validate the effectiveness of the proposed work by showing significant improvement in bus voltage profiles (up to 4%) and reduction in total power losses (up to 45%). The highest penetration level is observed for Case 2 (70%), which also corresponds to the highest LCC (k <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\$ $ </tex-math></inline-formula> 147094) and thus results in the lowest emission cost (k <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\$ $ </tex-math></inline-formula> 4920).

Electric Vehicles to Grid V2g Investigation and Enhancement of Smart Grid Distribution Systems Considering Geographical Representation

Electric Vehicles to Grid V2g Investigation and Enhancement of Smart Grid Distribution Systems Considering Geographical Representation

Smart grid and nuclear power plant security by integrating cryptographic hardware chip

Present electric grids are advanced to integrate smart grids, distributed resources, high-speed sensing and control, and other advanced metering technologies. Cybersecurity is one of the challenges of the smart grid and nuclear plant digital system. It affects the advanced metering infrastructure (AMI), for grid data communication and controls the information in real-time. The research article is emphasized solving the nuclear and smart grid hardware security issues with the integration of field programmable gate array (FPGA), and implementing the latest Time Authenticated Cryptographic Identity Transmission (TACIT) cryptographic algorithm in the chip. The cryptographic-based encryption and decryption approach can be used for a smart grid distribution system embedding with FPGA hardware. The chip design is carried in Xilinx ISE 14.7 and synthesized on Virtex-5 FPGA hardware. The state of the art of work is that the algorithm is implemented on FPGA hardware that provides the scalable design with different key sizes, and its integration enhances the grid hardware security and switching. It has been reported by similar state-of-the-art approaches, that the algorithm was limited in software, not implemented in a hardware chip. The main finding of the research work is that the design predicts the utilization of hardware parameters such as slices, LUTs, flip-flops, memory, input/output blocks, and timing information for Virtex-5 FPGA synthesis before the chip fabrication. The information is extracted for 8-bit to 128-bit key and grid data with initial parameters. TACIT security chip supports 400 MHz frequency for 128-bit key. The research work is an effort to provide the solution for the industries working towards embedded hardware security for the smart grid, power plants, and nuclear applications.

FDIPP: False Data Injection Prevention Protocol for Smart Grid Distribution Systems.

In this paper, a false data injection prevention protocol (FDIPP) for smart grid distribution systems is proposed. The protocol is designed to work over a novel hierarchical communication network architecture that matches the distribution system hierarchy and its vast number of entities. The proposed protocol guarantees both system and data integrity via preventing packet injection, duplication, alteration, and rogue node access. Therefore, it prevents service disruption or damaging power network assets due to drawing the wrong conclusions about the current operating status of the power grid. Moreover, the impact of the FDIPP protocol on communication network performance is studied using intensive computer simulations. The simulation study shows that the proposed communication architecture is scalable and meets the packet delay requirements of inter-substation communication as mandated by IEC 61850-90-1 with a minimal packet loss while the security overhead of FDIPP is taken into account.

Temperature impact assessment on multi-objective DGs and SCBs placement in distorted radial distribution systems

In smart grid distribution systems, the applications of Shunt Capacitor Banks (SCBs) and Distributed Generations (DGs) are widely known and installed for system loss reduction, voltage stability improvement of system buses, and to free up the system loading. However, the installation of SCBs and DGs in distribution systems with distorted waveforms will increase the harmonic distortion level if they are not placed at appropriate locations. In this paper, a Multiobjective Grey Wolf Optimizer (MOGWO) is proposed to find the optimal size and locations of SCBs and DGs simultaneously with regard to the impact of ambient temperature on distorted distribution systems. Electric utilities will be able to reduce system active losses, enhance the voltage stability for system buses, release the section loading, and reduce the total harmonic distortion level. Fuzzy set theory is utilized to choose the optimum compromise solution from the Pareto front solutions of the MOGWO method. The proposed method is applied to IEEE 69-bus and real data taken from the Saudi Electricity Company (SEC). The results show a higher capability in finding optimum solutions for SCBs and DGs placement in distorted Radial Distribution Systems (RDSs) compared to conventional methods.

Research on operation control of low-voltage MTDC system in a cyber-physical environment

Cyber-physical system is becoming a new feature and hot topic in the development of smart grid and DC power distribution system. Based on the standardized cyber-physical modeling and communication system — IEC 61850, this paper establishes the operation control architecture of the low-voltage multi-terminal DC (LV-MTDC) system. The coordinated operation control strategies including power electronic transformer (PET), voltage source converter (VSC) is proposed. Then a cyber-physical model of the system based on IEC 61850 is built, according to the application requirements of operation control in the LV-MTDC system. On this basis, the implementation method of system operation control based on IEC 61850 is proposed, including the software/hardware design of intelligent electronic device (IED), dispatching operation and uninterrupted power supply. The simulation environment is further built to verify the system operation control technology, and the test platform is used to carry out the actual tests. The research results show that the operation control technology for the LV-MTDC system proposed in this paper is feasible, which can guarantee the rapid and accurate information exchange of control commands and settings, and thus effectively realize the operation control of the LV-MTDC system under complex conditions.

Economic and environmental aspects of Smart Grid technologies implementation in Ukraine

Interruptions in electricity supply may have a series of failures that can affect banking, telecommunications, traffic, and safety sectors. Due to the two-way interactive abilities, Smart Grid allows consumers to automatically redirect on failure, or shut down of the equipment. Smart Grid technologies are the costly ones; however, due to the mitigation of possible problems, they are economically sound. Smart grids can't operate without smart meters, which may easily transmit real-time power consumption data to energy data centers, helping the consumer to make effective decisions about how much energy to use and at what time of day. Smart Grid meters do allow the consumer to track and reduce energy consumption bills during peak hours and increase the corresponding consumption during minimum hours. At a higher level of management (e.g., on the level of separate region or country), the Smart Grid distribution system operators have the opportunity to increase the reliability of power supply primarily by detecting or preventing emergencies. Ukraine's energy system is currently outdated and cannot withstand current loads. High levels of wear of the main and auxiliary equipment of the power system and uneven load distribution in the network often lead to emergencies and power outages. The Smart Grid achievements and energy sustainability are also related to the energy trilemma, which consists of key core dimensions– Energy Security, Energy Equity, and Environmental Sustainability. To be competitive in the world energy market, the country has to organize efficiently the cooperation of public/private actors, governments, economic and social agents, environmental issues, and individual consumer behaviors. Ukraine gained 61 positions out of 128 countries in a list in 2019 on the energy trilemma index. In general, Ukraine has a higher than average energy security position and lower than average energy equity, and environmental sustainability positions. Given the fact that the number of renewable energy sources is measured in hundreds and thousands, network management is complicated and requires a Smart Grid rapid response. Keywords: economic development, Smart Grid, electricity supply, economic and environmental efficiency.

High-Penetration Grid-Tied Photovoltaics: Analysis of Power Quality and Feeder Voltage Profile

More People are Turning to Photovoltaic (PV) technology to supply energy needs as concerns rise about greenhouse gases. Thus, installed PV capacity across the smart grid distribution systems has been rising. However, the high penetration of PVs could affect the operation and planning of distribution networks. To evaluate the impact of PVs connected to the grid, a case study on power quality and voltage profile was conducted using a 1.1-MW ac gridconnected PV power plant in Miami, Florida. As part of the power quality analysis, total harmonic distortion (THD) was explored, and high-power and high-energy ramp rate analyses were made.

Automatic fault isolation and restoration of distribution system using JADE based Multi-Agents

This paper proposes a solution for automatic service restoration along with automatic fault location and isolation of the faulty sections in feeder in a power distribution system. A Java agent development environment-based multiagent system (MAS) is proposed to solve the problem of automatic service restoration in smart grid distribution systems. The agent-based solution development is discussed in detail and the MAS application to solve power restoration problem is elaborated in this paper. A study is done on a modified IEEE 33 bus system and the solution is implemented in the Velachery substation of the Tamilnadu electricity board. The results prove that fast and effective fault location, isolation and service restoration is achieved using the proposed solution.

Heterogeneous Wireless Networks for Smart Grid Distribution Systems: Advantages and Limitations.

Supporting a conventional power grid with advanced communication capabilities is a cornerstone to transferring it to a smart grid. A reliable communication infrastructure with a high throughput can lay the foundation towards the ultimate objective of a fully automated power grid with self-healing capabilities. In order to realize this objective, the communication infrastructure of a power distribution network needs to be extended to cover all substations including medium/low voltage ones. This shall enable information exchange among substations for a variety of system automation purposes with a low latency that suits time critical applications. This paper proposes the integration of two heterogeneous wireless technologies (such as WiFi and cellular 3G/4G) to provide reliable and fast communication among primary and secondary distribution substations. This integration allows the transmission of different data packets (not packet replicas) over two radio interfaces, making these interfaces act like a one data pipe. Thus, the paper investigates the applicability and effectiveness of employing heterogeneous wireless networks (HWNs) in achieving the desired reliability and timeliness requirements of future smart grids. We study the performance of HWNs in a realistic scenario under different data transfer loads and packet loss ratios. Our findings reveal that HWNs can be a viable data transfer option for smart grids.

An Impedance-Based Method for Distribution System Monitoring

This paper presents a new approach in monitoring of a power distribution system. It uses the bus voltage and injected current to extract the apparent impedance seen from the measuring unit location. Then the apparent impedance variation is used for the monitoring of different electrical quantities of the feeder such as feeder power factor, and the minimum and maximum of active and reactive power flow. This paper also presents the mathematics for defining the monitoring zone on the R-X plane to detect those parameters variations. The proposed method was tested with the unbalanced distribution system feeder loading, distributed and lumped model of solar, and wind power generations. OpenDSS and MATLAB are used to test the effectiveness of the method with the IEEE 8500 node test feeder. The dynamic performance of the proposed method is studied for online monitoring of the reactive power capability requirement of a Canadian utility for a wind farm integrated to the system. The results show that the monitoring method based on the apparent impedance has a good capability to detect different operation conditions. In addition, the simplicity of the proposed method allows easy application of it in smart grid and traditional distribution system.

Fault Diagnosis of Smart Grid Distribution System by Using Smart Sensors and Symlet Wavelet Function

In today's era of smart grid system scenario, the fault diagnosis is of utmost important task. Present distribution networks change drastically due to expansion and inclusion of large number of distributed generation units into power system at distribution level. To face the challenges of modernized girds, conventional fault diagnosis methodologies require drastic change by making use of advanced infrastructure and technologies. This will be helpful to achieve automation in fault diagnosis tasks, improved power quality, reliability, resilience and self healing property of the power system. This paper proposes the use of smart sensors and advanced communication technology that will be available in future smart grids to carry out automated fault diagnosis tasks using signal processing techniques. Methods of using Standard deviation features of fault transient signal and a fault location factors are proposed. Performance of various scaling levels, features and components of fault transient current signals extracted using the latest non conventional Symlet mother wavelet function are evaluated and compared. The attempt is made to select optimal features and components of fault transient currents to improve the performance of present limited types of available fault locators. The tests are taken on standard model of smart grid distribution system but can be applied for fault diagnosis of any other power equipment. Results show adequate accuracy to extend the use of proposed method for real time applications.

Relay coordination analysis and protection solutions for smart grid distribution systems

Growing complexity of conventional power grids and their management, increasing power demand and energy quality expectations considering grid reliability, and efficiency and security concerns have triggered the evolution of smart grids. This is an expected result of implementing new technologies in existing grids, including renewable sources such as wind turbines and photovoltaic modules. With implementation of such new elements to the system, the protection concept should be considered by system regulators. In order to analyze protection problems, simulation-based analysis should be carried out before high-cost experimental studies. In this study, a simulation-based evaluation for a smart gridbased distribution system is performed. System simulations are realized considering different fault cases and optimum operating conditions are obtained. A ring grid is designed including a generator and a wind turbine as sources and variable loads as consumers. Several points in the grid are selected as fault locations, and the condition of connecting distributed generation plants to the grid is evaluated in the MATLAB/Simulink environment. This study presents an analysis about the possibility of forming a grid with high reliability and efficiency under fault conditions.

Technologies used in Smart Grid to implement Power Distribution System

&lt;span style="line-height: 107%; font-family: 'Arial',sans-serif; font-size: 9pt; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA;" lang="EN-US"&gt;Recently, the debate has been going on about the role of power plus distribution systems, its technologies for future smart grids in power systems. The emerging of new technologies in smart grid and power distribution systems provide a significant change in terms of reduction the commercial and technical losses, improve the rationalization of electricity tariff. The new technologies in smart grid systems have different capabilities to increase the technological efficiency in power distribution systems. These new technologies are the foreseeable solution to address the power system issues. This paper gives a brief detail of new technologies in smart grid systems for its power distribution systems, benefits and recent challenges. The paper provides a brief detail for new researchers and engineers about new technologies in smart grid systems and how to change traditional distribution systems into new smart systems.&lt;/span&gt;

A Study on the Agent (Protective Device)-based Fault Determination and Separation Methodology for Smart Grid Distribution System

This paper proposes a new fault isolation methodology for a smart protective device which plays an agent role on the smart grid distribution system with the distributed generation. It, by itself, determines accurately whether its protection zone is fault or not, identifies the fault zone and separates the fault zone through the exchange of fault information such as the current information and the voltage information with other protective devices using bi-directional communication capabilities on the smart grid distribution system. The heuristic rules are obtained from the structure and electrical characteristics determined according to the location of the fault and DG (Distributed Generation) when faults such as single-phase ground fault, phase-to-phase short fault and three-phase short fault occur on the smart grid distribution system with DG.

A Survey on Smart Grid Distributed Power Flow: IEC61850, IEC 61499 and Intelligent Controls

A Recent concept of distribution infrastructure plays a vital role in the efficient utilization of energy. To avoid global warming and greenhouse gas emission, carbon based power plant should be replaced with distributed renewable energy (DRE) such as wind, solar etc. Renewable energy resources can be integrated to grid by intelligent electronic devices (IED). This paper deals with the novel automation architecture that supports power distribution systems to avoid power blackout and also it briefs the major requirement of the smart grid distribution system needed for a competitive world. International standard IEC 61850 and IEC 61499 provides a solution for substation automation through intelligent logical nodes (ILNs) which enhances interoperability and configurability.Later an open source platform is used for enhancing the communication that automatically generates the data model and communication nodes for intelligent electronic devices.However for future requirements in smart grid, the addition of new functions as well as the adaptation of function for IEDs is necessary. A concept of reconfigurable software architecture is introduced for integrating distributed and renewable energy resources. Such interfaces and services provide adaptation of the functional structure and contribute efficient Smart Grid system. This survey summarizes the communication infrastructure of smart energy system.