Small Width Research Articles

0.2-mm-Step Verification of the Dual Gaussian Distribution Model with Large Sample Size for Predicting Tap Success Rates

The Dual Gaussian Distribution Model can be utilized for predicting the success rates of tapping targets. However, previous studies have shown that the prediction error increases to as much as 10 points, where "points" represent the percentage difference between the observed and predicted values of the tap success rate, particularly for a small target width W such as 2 mm. We hypothesize that this could be due to the experimental designs with sparse W levels performed by few participants, rather than the model itself. Our experiment involving horizontal and vertical bar targets with W = 2-8 mm (step: 0.2 mm) performed by more than 180 participants showed that the maximum prediction errors were relatively small: 2.769 and 3.185 points, respectively. Furthermore, the correlation between W and the prediction error was statistically small (Pearson's |r| < 0.2), and W was not a significant contributor to changing prediction errors (p>0.05). As these results do not support the concerns that the Dual Gaussian Distribution Model has an issue when used with small targets, the development of applications and refined models is encouraged to continue.

Solvent mediated synthesis of multicolor narrow bandwidth emissive carbon quantum dots and their potential in white light emitting diodes

The development of efficient and environmentally sustainable materials for white light-emitting diodes (WLEDs) is of paramount importance in the field of lighting technology. In this study, we present a solvent-modulated synthesis approach for the fabrication of multicolor narrow-bandwidth emissive carbon quantum dots (CQDs) as a promising solution for constructing WLEDs. The synthesis method involves the controlled reaction of organic precursors in different solvent environments, leading to the formation of CQDs with distinct emission wavelengths with a relatively small full width at half maximum, ranging from 28 to 42 nm. Moreover, these synthesized multicolor CQDs demonstrate a remarkably high fluorescence quantum yield of up to 65%, indicating their potential for constructing efficient WLED when incorporated in polymer matrix and coated on the surface of blue light-emitting diode (LED).

Pentaquark molecular states with hidden bottom and double strangeness

We investigate the meson-baryon interaction in coupled channels with the quantum numbers of the pentaquarks Pbss\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$P_{bss}$$\\end{document} and Pbsss\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$P_{bsss}$$\\end{document}. The interaction is derived from an extension of the local hidden gauge approach to the heavy quark sector, which has demonstrated accurate results compared to experiments involving Ωb\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\Omega _{b}$$\\end{document}, Ξb\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\Xi _{b}$$\\end{document} states, and pentaquarks Pc\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$P_{c}$$\\end{document} and Pcs\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$P_{cs}$$\\end{document}. In our study, we identify several molecular states with small decay widths within the chosen set of coupled channels. The spin-parity (JP\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$J^P$$\\end{document}) of these states is as follows: JP=12-\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$J^P={\\frac{1}{2}}^-$$\\end{document} for pseudoscalar-baryon (12+\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\\frac{1}{2}}^+$$\\end{document}) coupled channels, JP=32-\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$J^P={\\frac{3}{2}}^-$$\\end{document} for pseudoscalar-baryon (32+\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\\frac{3}{2}}^+$$\\end{document}) coupled channels, JP=12-\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$J^P={\\frac{1}{2}}^-$$\\end{document} and 32-\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\\frac{3}{2}}^-$$\\end{document} for vector-baryon (12+\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\\frac{1}{2}}^+$$\\end{document}) coupled channels, and JP=12-\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$J^P={\\frac{1}{2}}^-$$\\end{document}, 32-\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\\frac{3}{2}}^-$$\\end{document}, 52-\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\\frac{5}{2}}^-$$\\end{document} for vector-baryon (32+\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\\frac{3}{2}}^+$$\\end{document}) coupled channels. We search for the poles of these states and evaluate their couplings to the different channels.

Thouless pumping and trapping of two-component gap solitons

We study Thouless pumping and arresting of gap solitons in a two-component Bose gas loaded into an optical superlattice. We show that, depending on the atomic interactions and chemical potentials, the two solitons can be simultaneously pumped or trapped, but we also identify regimes where one soliton is pumped and the other arrested. These behaviors can be understood by considering an effective model of the system based on a variational approach, which reveals that the soliton width is a suitable qualifier for the observed behaviors: solitons with a larger width get transported, while solitons with a smaller width get trapped. Since these widths can be controlled by tuning interactions, it should be possible to observe all behaviors experimentally. Published by the American Physical Society 2024

Optimization of small coal pillar width and control measures in gob-side entry excavation of thick coal seams

This study introduces an innovative optimized bolting support system specifically tailored for gob-side entry excavation in thick coal seams at a coal mine in southwestern Shandong, China. Employing theoretical analysis, numerical simulation, and field measurements, the research focuses on examining the failure characteristics of surrounding rock during gob-side entry excavation. The key innovation lies in the development of a 5-meter optimal coal pillar width, ensuring balanced stress distribution and structural integrity. Additionally, a lag time of at least 46 days between gob-side entry excavation and the upper working face retreat is recommended to mitigate roof subsidence and surrounding rock deformation. The optimized bolting support system, featuring increased bolt pretension, utilization of high-strength steel strips, and reinforcement of weak points, effectively reduces deformation of the roadway surrounding rock, meeting support requirements for normal production. This novel approach successfully addresses the support challenges in thick coal seam gob-side entry excavation, enhancing mining safety and resource recovery rates.

High-quality VO2 thin films sputter-deposited on borosilicate glass substrates for modulating solar transmission and thermal emission

M1-phase VO2 exhibits a reversible phase transition between the insulating and metallic states at T = ∼341 K, and VO2-based smart windows have been extensively studied. The smart window application requires the growth of high-quality VO2 films with a large resistivity change and small hysteresis width (ΔT) on glass substrates using a scalable deposition method such as sputtering. However, the polymorphic nature of VO2 makes it challenging to obtain high-quality VO2 films on ordinary window glasses (borosilicate and soda-lime glasses). Thus far, VO2 films sputtered on glass substrates have exhibited resistivity changes of 1.5–2 orders of magnitude and ΔT = 3–19 °C. In this study, we show that high-quality VO2 films with a resistivity change of 2.5−3.0 orders of magnitude and ΔT = 2 °C can be grown on borosilicate glass substrates via radio-frequency sputtering followed by thermal annealing. The simultaneous achievement of such a large resistivity change and small hysteresis width is highly encouraging not only for smart windows but also for other applications. With respect to the modulation of solar transmission and thermal emission with temperature, the performance levels of the produced VO2 films were 70−75 % of those expected from pure M1-phase VO2 films.

On-Chip Thermoelectric Devices Based on Standard Silicon Processing.

The strong reduction of thermal conductivity with respect to bulk silicon makes nanostructured silicon one of the best materials for highly efficient direct conversion of heat into electrical power and vice-versa. The widespread technologies for the integration of silicon devices can be used to define on-chip micro thermoelectric generators (scavengers); similar structures could also be used for precise and well-localized cooling through the reverse process of heat pumping. However, the road to the fabrication of integrated thermal energy scavengers or cooler, based on silicon, is still very long. In this work, the design and the fabrication process of on-chip thermoelectric devices based on a large number of interconnected monocrystalline silicon nanobeams, very tall (>1 µm) and thin (less than 200 nanometers), arranged in large areas combs is shown. The small width of the nanobeams gives a reduced thermal conductivity, and the height perpendicular to the substrate allows the definition of a highly dense collection of nanostructures. The total cross-sectionis far broader than that of other nanostructures, a characteristic that guarantees both mechanical stability and larger deliverable power per unit area.

Monitoring river discharge from space: An optimization approach with uncertainty quantification for small ungauged rivers

The number of in-situ stations measuring river discharge, one of the Essential Climate Variables (ECV), is declining steadily, and numerous basins have never been gauged. With the aim of improving data availability worldwide, we propose an easily applicable and transferable approach to estimate reach-scale discharge solely using remote sensing data that is suitable for filling gaps in the in-situ network. We combine 20 years of satellite altimetry observations with high-resolution satellite imagery via a hypsometric function to observe large portions of the reach-scale bathymetry. The high-resolution satellite images, which are classified using deep learning image segmentation, allow for detecting small rivers (narrower than 100m) and can capture small width variations. The unobserved part of the bathymetry is estimated using an empirical width-to-depth function. Combined with precise satellite-derived slope measurements, river discharge is calculated at multiple consecutive cross-sections within the reach. The unknown roughness coefficient is optimized by minimizing the discharge differences between the cross-sections. The approach requires minimal input and approximate boundary conditions based on expert knowledge but is not dependent on calibration. We provide realistic uncertainties, which are crucial for data assimilation, by accounting for errors and uncertainties in the different input quantities. The approach is applied globally to 27 river sections with a median normalized root mean square error of 12% and a Nash–Sutcliffe model efficiency of 0.560. On average, the 90% uncertainty range includes 91% of the in-situ measurements.

The Si-doped BCC-based high-entropy alloy to overcome soft magnetic–mechanical properties trade-off via coherent B2 nanoprecipitates

The trade-off between magnetic property and mechanical property usually occurs in traditional soft magnetic materials (SMMs) because the strengthening strategy (e.g. precipitation hardening) can worsen soft magnetic properties through the hindrance of magnetic domain wall motion. This dilemma is overcome in current work by developing the FeCoNiAlSi0.01 (Fe24.94Co24.94Ni24.94Al24.94Si0.24 in at.%) high-entropy alloy (HEA) (termed as Si0.24 HEA) with excellent soft magnetic performance and attractive mechanical property through coherent B2 nanoprecipitates (6 nm) distributed in body-centered-cubic (BCC) matrix. The atom probe tomography (APT) result shows that the B2 nanoprecipitates have similar composition to the BCC matrix. The Si0.24 HEA shows small width of domain branching and low anisotropy constant leading to the optimum alternating current (AC) soft magnetic properties. The respective total loss (AC Ps), the coercivity (AC Hc), and the eddy current loss (Pe) at 950 Hz of the Si0.24 HEA are 21.20 W/kg, 230 A/m, and 16.25 W/kg, which is reduced by 45 %, 44 %, and 48 % compared with the FeCoNiAl (Si-free HEA). The Si0.24 HEA shows good mechanical property with the yield strength of 987 MPa and engineering strain of 30 %, which is 12 % and 1.3 times higher than that of the Si-free HEA. Moreover, the current studied HEAs exhibit high saturation magnetization (Ms = 108–115 Am2/kg) and Curie temperature (TC = 1053–1097 K, larger than TC of Fe (1043 K)), which indicates their perspective high-temperature applications as novel SMMs for the need of modern power electronics and electrical machines.

Effective removal of global tilt from atomically-resolved topography images of vicinal surfaces with narrow terraces

The main feature of vicinal surfaces of crystals characterized by the Miller indices (hhm) is rather small width (less than 10 nm) and substantially large length (more than 200 nm) of atomically-flat terraces. This makes difficult to apply standard methods of image processing and correct visualization of crystalline lattices at the terraces and multiatomic steps. Here we consider two procedures allowing us to minimize effects of both small-scale noise and global tilt of sample: (i) analysis of the difference of two Gaussian blurred images, and (ii) subtraction of the plane, whose parameters are determined by optimization of the histogram of the visible heights, from raw topography image. It is shown that both methods provide nondistorted images demonstrating atomic structures on vicinal Si(556) and Si(557) surfaces.

Analysis of the Current State of Research on Bio-Healing Concrete (Bioconcrete).

The relatively small tensile strength of concrete makes this material particularly vulnerable to cracking. However, the reality is that it is not always possible and practically useful to conduct studies on high-quality sealing cracks due to their inaccessibility or small opening width. Despite the fact that currently there are many technologies for creating self-healing cement composites, one of the most popular is the technology for creating a biologically active self-healing mechanism for concrete. It is based on the process of carbonate ion production by cellular respiration or urease enzymes by bacteria, which results in the precipitation of calcium carbonate in concrete. This technology is environmentally friendly and promising from a scientific and practical point of view. This research focuses on the technology of creating autonomous self-healing concrete using a biological crack-healing mechanism. The research methodology consisted of four main stages, including an analysis of the already conducted global studies, ecological and economic analysis, the prospects and advantages of further studies, as well as a discussion and the conclusions. A total of 257 works from about 10 global databases were analyzed. An overview of the physical, mechanical and operational properties of bioconcrete and their changes is presented, depending on the type of active bacteria and the method of their introduction into the concrete mixture. An analysis of the influence of the automatic addition of various types of bacteria on various properties of self-healing bioconcrete is carried out, and an assessment of the influence of the method of adding bacteria to concrete on the process of crack healing is also given. A comparative analysis of various techniques for creating self-healing bioconcrete was performed from the point of view of technical progress, scientific potential, the methods of application of this technology, and their resulting advantages, considered as the factor impacting on strength and life cycle. The main conditions for a quantitative assessment of the sustainability and the possibility of the industrial implementation of the technology of self-healing bioconcrete are identified and presented. Various techniques aimed at improving the recovery process of such materials are considered. An assessment of the influence of the strength of cement mortar after adding bacteria to it is also given. Images obtained using electron microscopy methods are analyzed in relation to the life cycle of bacteria in mineral deposits of microbiological origin. Current gaps and future research prospects are discussed.

Enhancing pixel-level crack segmentation with visual mamba and convolutional networks

Computer vision-based semantic segmentation methods are currently the most widely used for automated detection of structural cracks in buildings and pavements. However, these methods face persistent challenges in detecting fine cracks with small widths and in distinguishing cracks from background stains. This paper addresses these issues by introducing MambaCrackNet, a new network architecture for pixel-level crack segmentation. MambaCrackNet incorporates residual visual Mamba blocks and integrates visual Mamba and convolutional neural network-based segmentation techniques. This approach effectively enhances the detection of fine cracks, reduces misdetections of background stains, and remains robust to variations in patch size and training sample sizes, making it highly practical for engineering applications. On two open access crack datasets, MambaCrackNet outperformed mainstream crack segmentation models, achieving MIoU scores of 0.8939 and 0.8560 and F1-scores of 0.8817 and 0.8412.

Impact of the Interruption Duration on Photoluminescence Properties of MOCVD-Grown GaAsP/InAlGaAs Quantum Well Structures.

The growth interruption technology is introduced to the growth of GaAsP/InAlGaAs quantum well (QW) structure using metal-organic chemical vapor deposition (MOCVD). The effect of growth interruption time (GIT) on the crystalline quality and optical properties are investigated. The two distinctive emission peaks are the transition recombination between the electron level of conduction band and the light and heavy hole level of valence band in the photoluminescence (PL) at room temperature. The PL peaks present a redshift and merge together with the increasing GIT, which is attributed to the QW energy level shift caused by the increase in arsenic concentrations in GaAsP QW, the diversified thickness of QW and the variations of indium components in the InAlGaAs barrier layer. The Gaussian deconvolution parameters in temperature-dependent PL (TDPL) show that the GaAsP/InAlGaAs QW with a GIT of 6 s has a 565.74 meV activation energy, enhancing the carrier confinement in QW and the PL intensity, while the 6 s-GIT GaAsP QW has the increasing interface roughness and the non-radiative centers at the InGaAsP intermediate layer, leading to a spectral broadening. The QW with 10 s-GIT exhibits a small full width at half maximum (FWHM) with the various temperature, indicating reduced interface roughness and excellent crystal quality. An increase in GIT may be suitable for optimizing the optical properties of GaAsP/InAlGaAs QW.

Measurement of small island characteristics using high resolution ECE and CER at DIII-D

Abstract The measurements using the high resolution electron cyclotron emission radiometry and the charge exchange and recombination spectroscopy are processed using analytic formulas to allow for the detection of islands as small as 1.9 cm. In contrast to large, saturated magnetic islands which are relatively well understood to be governed by the loss of bootstrap current inside the island, small islands are less well understood due to the difficulty of their accurate measurement in tokamaks. Here, ‘small’ islands are islands comparable in size to the ion banana width, which can be as small as 0.8 cm at DIII-D. The new measurement methods allow for the detection of small island widths when the predicted increase of mode frequency to match the Doppler shifted ion diamagnetic frequency is observed. Therefore, for the first time, the mode frequency increase can be unambiguously associated to the acceleration of the magnetic island propagation. Such association allows for a further development and validation of the much-debated theory of ion polarization currents, which is thought to govern the small island growth.

The Bound Band Structure in a Strong Attractive Dirac Comb

Abstract: The Dirac comb problem in quantum mechanics is revisited by estimating its energy band structure, including the band gap, bandwidth, and the effective mass at band edges. The case of an attractive strong Dirac comb potential is considered. Our findings show the existence of a single bound energy band state, which is flat with a small width and a large effective mass at both of its edges; positive at its lower edge and negative at its upper edge. Keywords: Dirac comb, Bound energy, Band structure, Dispersion relation, Band gap, Bandwidth, Effective mass.

Dual Multiresonance Core Strategy Enable Efficient Pure Blue Organic Light‐Emitting Devices Based on Fluorene Linkages

AbstractMultiresonance thermally activated delayed fluorescence (MR‐TADF) emitters with high color purity in virtue of their inherent narrowband emission have received great interest in organic light‐emitting diodes (OLEDs). However, it remains a big challenge to develop the ultrapure blue MR‐TADF emitters with high efficiency. In this work, a novel “dual‐MR‐core” strategy is proposed by connecting two parent N‐B‐O‐skeletons with non‐conjugate 9‐position substituted fluorene linkages for high efficient deep‐blue MR‐TADF emitters, namely H‐FOBN and Me‐FOBN, which possess the highly twisted structure with suppressed aggregation. Finally, the vacuum‐deposited deep‐blue OLED exhibits excellent external quantum efficiency (EQE) of 25.1% with small full width at half maximum (FWHM) of 28 nm, as well as CIE of (0.14, 0.08). Furthermore, owing to enhanced solubility, the solution‐processed deep‐blue OLED based on Me‐FOBN shows EQE of 11.3%, with small FWHM of 32 nm and CIE of (0.14,0.09). These outstanding performances confirm that this “dual‐MR‐core” strategy provides a feasible approach to develop high efficient ultrapure blue MR‐TADF emitters.

Vortex-induced vibration characteristic and trigger mechanism of semi-closed streamlined box girder trans-sea bridges

In this study, sectional model wind-tunnel tests are conducted to investigate the vortex-induced vibration (VIV) of semi-closed girders with different aspect ratios. The influencing factors, including the wind attack angle and Scruton number Sc, are considered. The VIV is compared among semi-closed girder sections with three aspect ratios and unclosed widths. Numerical simulation is performed to investigate instantaneous vorticities and mean streamlines around the girder sections. The findings indicate that, at a wind attack angle of +3°, vertical VIVs are consistently observed in the girder sections with three different aspect ratios. Moreover, a semi-closed section with a large unclosed position exhibits a vertical VIV at a wind attack angle of 0°. As Sc increases progressively, the discrepancy in the vertical VIV amplitude of the main girder diminishes gradually. At the same Sc, the vertical VIV amplitude of a girder with a smaller aspect ratio is larger than that of a girder with a larger aspect ratio. A large width of the unclosed position can deteriorate the VIV, thus affecting the flow structure surrounding the girder section. At a wind attack angle of 0°, for a girder section with a large aspect ratio and small unclosed width, the lower vortices propagate along the girder section. Additionally, the vortices propagate away from the bottom plate of the girder section when the girder section features a large unclosed width at a wind attack angle of 0°. At a wind attack angle of +3°, the vortices at the unclosed position propagate along the section toward the leeward side. A positive wind attack angle intensifies the flow separation, and the size of the vortices at the unclosed position increases to a certain extent. These findings can provide a reference for the wind-resistant design of semi-enclosed main girders.

Leaf venation network architecture coordinates functional trade-offs across vein spatial scales: evidence for multiple alternative designs.

Variation in leaf venation network architecture may reflect trade-offs among multiple functions including efficiency, resilience, support, cost, and resistance to drought and herbivory. However, our knowledge about architecture-function trade-offs is mostly based on studies examining a small number of functional axes, so we still lack a more integrative picture of multidimensional trade-offs. Here, we measured architecture and functional traits on 122 ferns and angiosperms species to describe how trade-offs vary across phylogenetic groups and vein spatial scales (small, medium, and large vein width) and determine whether architecture traits at each scale have independent or integrated effects on each function. We found that generalized architecture-function trade-offs are weak. Architecture strongly predicts leaf support and damage resistance axes but weakly predicts efficiency and resilience axes. Architecture traits at different spatial scales contribute to different functional axes, allowing plants to independently modulate different functions by varying network properties at each scale. This independence of vein architecture traits within and across spatial scales may enable evolution of multiple alternative leaf network designs with similar functioning.

Study on fissure evolution of overlying rock in lower protective mining

Protective layer mining is the most effective and economical technical measure to prevent coal and gas outburst accidents. At present, in the study of multiple concentrated coal layer stress, plastic damage and mining pressure discharge range, there are problems such as less research on the protection effect of protective layer and less measured measurement points resulting in large experimental error. In view of the above problems, taking the 2305 working face of a Shanxi mine as the test mine, the crack evolution characteristics of downhole drilling were detected by this method, by means of the deep base point technology, and study the plastic damage, pressure relief characteristics and expansion characteristics in the mining process of protective layer, the findings suggest that, the crack development of the protective layer is mainly characterized by small width and quantity, after protective exploitation, the number of width and number of cracks were significantly increased, the injection is three times higher than before the protective mining, the degree of fissure development is greatly improved. The settlement change of each rock layer on the basic top presents periodic and nonlinear changes, divided into the initial deformation, violent deformation, deformation and decline of the three periods; the plastic damage area, pressure relief curve and expansion curve of protective layer are “saddle type”, the overall pressure discharge rate of the protected layer has decreased by 60%, to meet the requirements of the critical value of expansion rate in the detailed rules for preventing coal and gas outburst, the protective layer mining technology applies to other working faces of the coal mine.

Initiation of rest-grazing during soil thawing improves interspecific relationships and stability of plant communities on alpine grassland.

Grazing management is essential to maintain the stability of grassland ecosystems. To determine the optimal rest-grazing period of alpine meadow, five rest-grazing periods were set based on soil thawing and plant re-greening in this study. The niche, interspecific relationships, and stability of plant communities at different rest-grazing periods were investigated. Rest-grazing during soil thawing resulted in a small niche width and niche overlap of plants, overall positive interspecific associations, and a high stability of plant communities. Delayed rest-grazing time to plant re-greening resulted in a large niche width and niche overlap of plants, overall negative interspecific associations, and a low stability of plant communities. Rest-grazing in alpine meadows should begin as soon as possible to promote healthy and sustainable utilization of grasslands.