Small Temperature Difference Research Articles

Density Stratification and Buoyancy Evolution in Pyroclastic Density Currents

AbstractPyroclastic density currents (PDCs) are density‐stratified along their vertical axis, with the near‐bed portion being denser than the upper portion, resulting from particle settling and ambient air entrainment at current margins. Whereas vertical density stratification likely influences mixing, sedimentation, and buoyancy of PDCs, many depth‐averaged models of PDC dynamics assume currents are well‐mixed. We investigated this discrepancy by performing sub‐aqueous laboratory experiments and conducted complementary numerical simulations to interrogate current dynamics at finer scales. Currents with small temperature difference with the ambient fluid become density‐stratified during propagation. The dynamics of such currents resemble two‐phase flows, in which particles move freely and particle concentration becomes stratified, but fluid density remains constant. Currents with large temperature difference with the ambient fluid, however, do not develop density stratification during propagation, due to current dynamics becoming dominated by the fluid phase and the lessening importance of particles. Currents that develop density stratification do not lift off from the bed within the domain of the setup, whereas poorly stratified currents do lift off, forming a rising plume. Strong density stratification within currents inhibits turbulence production, preventing entrained ambient fluid on current edges from mixing into current interiors. Poorly stratified currents are highly turbulent, have vigorous internal mixing, thereby achieving lift‐off. The strongly stratified currents are analogous to PDCs that result from eruption column collapse, maintaining fast velocity, low internal mixing, and high temperature over long distances. The poorly stratified currents are analogous to dilute ash‐cloud surges that develop atop basal avalanches, having short runout distances.

Synergy between gelatin hydrogels and electrodes for adjustable and thermally stable ionic thermoelectric supercapacitors

Gelatin-based ionic hydrogels are flexible, bio-compatible, and abundant materials, showing immense potential as quasi-solid-state electrolytes in energy conversion and storage applications. Recent studies highlighted the critical synergy between hydrogel electrolytes and electrodes on the thermopower and energy density in emerging ionic thermoelectric (i-TE) devices. In this work, the significant impact from electrodes to the thermoelectric response of gelatin hydrogels is explored and explained at the molecular level. A universal negative offset in the thermopower is observed when substituting the conventional Cu foil by carbon-based paper (CBP) electrodes. This is attributed to the electrolyte infiltration and strong cation restriction on the CBP electrodes, which facilitates anion thermodiffusion. The thermopowers of Gelatin-CsCl change from p- (0.1–0.5 mV K−1) to n-type (up to −2.89 ± 0.34 mV K−1) and remain thermally stable at a large temperature difference of −36.8 K. The power factor and average power density in the ionic thermoelectric supercapacitors (ITESCs) made from Gelatin-0.02 M CsCl and CBP electrodes reach 2.13 ± 0.50 μW m−1 K−2 and 145.37 μW m−2 at a small temperature difference of −7.7 K. Furthermore, the highest normalized instantaneous power density achieved during the quasi-continuous charge–discharge cycles is 39.42 μW m−2 K−2, among the best ITESCs. This work provides fundamental insights into the previously overlooked synergy between gelatin hydrogels and electrodes for adjustable and thermally stable i-TE conversion and energy storage devices.

Cooling method for the rotor of a superconducting motor

Electrification has been proposed as a route to decarbonizing air travel. Conventional electric motors are too heavy to achieve the power densities required for aviation so superconducting motors for aircraft are being developed. Superconductors however, work at cryogenic temperatures, which indispensably require a reliable and efficient cooling mechanism with a cryocooler. The Robinson Research Institute is developing a 3 MW superconducting motor using an HTS (High Temperature Superconductor) rotor operating at 50 K and MgB2 running at near 20 K for the stator. The motor is intended to run at a shaft speed of 4500-6000 rpm to directly drive a ducted fan. A key challenge is the removal of heat from a cryogenic spinning rotor to a stationary refrigerator so it can be rejected at ambient temperatures. Previous motors have utilized externally pumped or thermos-syphoned cryogens to cool the rotor, which require complex rotary seals. The aircraft application demands a compact and low weight solution. This paper presents a novel cooling design where a stationary cryocooler’s cold heat exchanger penetrates the rotor, and the relative motion of the two creates a pumping motion for cold helium gas to transfer heat from the rotor to the cryocooler. The sealing is low pressure and at ambient temperature and pressure with a temperature gradient in the helium adjacent to the cryocooler regenerator. Design and CFD modelling of the concept are presented showing the system can generate sufficient cold helium flow to transfer heat from the rotor to the cryocooler with a small temperature difference, resulting in a compact, efficient, and low-weight rotor cooling method.

An analysis of the dipalmitoylphosphatidylcholine bilayer gel phases predicted with molecular dynamics simulations using force fields from the GROMOS family

Dipalmitoylphosphatidylcholine is a phospholipid of major importance for biological systems. Molecular dynamics simulation investigations of this lipid focused on their behavior at human body temperature (≈ 37 °C or 310 K). For some applications, however, it is necessary to study its properties at room temperature (≈ 25 °C or 298 K). A small difference in temperature at this range is responsible for a phase transition in the lipid bilayer. Therefore, molecular dynamics simulations are carried out applying six different force fields from the GROMOS family to compare the less ordered phase (liquid-crystalline phase) with a more ordered phase (gel phase) of the hydrated bilayer of dipalmitoylphosphatidylcholine formed at 323 K and 298 K, respectively. The analysis of the bilayer structural quantities is used to evaluate order and packing at the two temperatures. The area per lipid and deuterium order parameter results are in agreement with simulation results from the literature and are also compared with experimental data. These parameters, however, do not provide a clear picture of the low-temperature gel phase present in the simulations using the force fields from the GROMOS family. To address this, a strategy for computing the lipid phase nematic order parameter is proposed, and a reference gel phase is simulated using the CHARMM36 force field for comparison. The results are consistent with other structural quantities but reveal a level of order that is below the expected for an ordered gel phase for the GROMOS force fields. Visual inspection of the simulation trajectories suggests the presence of a ripple phase. Overall, the GROMOS 54A8 provides the best performance among the tested GROMOS force fields for both investigated temperatures, even lacking a proper representation of the ordered gel phase.

Study of the characteristics of the separated gravity heat pipe of a self-activated PCM wall system

Self-activated phase change material (PCM) wall integrated with radiative sky cooling (RSC) is a novel wall system that uses natural energy directly for low-energy buildings to support carbon peaking and neutrality goals. A separated gravity heat pipe (SGHP) is an effective heat transfer component for heat transport from the wall body to the radiative cooler without using mechanical energy. Its heat transfer characteristics affect the thermal performance of the wall system. In this study, a numerical Volume of Fluid (VOF) model of the SGHP is established. The thermal and flow characteristics under the small temperature difference boundary of building scenarios are simulated and analyzed. Results show that the average temperature of the working fluid inside the SGHP in the “steady stage” is about 26.3 °C when the boundary temperature of the evaporation and condensation sections are respectively 28 °C and 20 °C. The heat exchange can reach 356 W/m2 and the flow velocity of the working fluid is about 0.1 m/s. Influences of different evaporation/condensation boundary temperatures on the heat transfer effect are further studied. Compared to increasing the evaporation section temperature, decreasing the condensation section temperature is a better strategy for improving the heat exchange capacity of the SGHP.

Research on the Temperature Variation Law during the Nitrogen Pre-Cooling Process in LNG Unloading Pipelines

In order to study the temperature change law of a nitrogen pre-cooling LNG unloading pipeline, a three-dimensional numerical simulation of an LNG pipeline with a bellow expansion bend was conducted using Fluent software (2020 R2). This simulation involved progressively controlling the nitrogen injection temperature and flow rate. The results show that increasing the nitrogen flow rate can improve the pre-cooling rate and reduce the top–bottom temperature difference of the pipeline, but there is an optimal value. Under the same nitrogen injection velocity conditions, it was found that smaller pipe diameters result in smaller temperature differences between the top and bottom of the pipeline. However, due to the reduced cooling capacity of the nitrogen injection, this leads to a decrease in the pre-cooling rate. The top–bottom temperature difference of the pipeline is mainly related to the strength of the natural convection in the pipeline. The stronger the natural convection, the greater the temperature difference between the top and bottom. Gr and Gr/Re2 reflect the relative magnitude of the natural convection intensity and forced convection intensity in the pipe. The larger the Gr and Gr/Re2, the stronger the natural convection. Therefore, Gr and Gr/Re2 are positively correlated with the top–bottom temperature difference, and the variation trend of the top–bottom temperature difference can be judged by the values of Gr and Gr/Re2.

Evaluation of the ocean component on different coupled hurricane forecasting models using upper-ocean metrics relevant to air-sea heat fluxes during Hurricane Dorian (2019)

In August 2019 Hurricane Dorian traveled through the Caribbean Sea and Tropical Atlantic before devastating the Bahamas. The operational hurricane forecasting models under-predicted the intensity evolution of Dorian prior to the storm reaching its maximum strength. Research studies have shown that a more realistic upper-ocean characterization in coupled atmosphere-ocean models used to forecast hurricanes has the potential to lead to more accurate hurricane intensity forecasts. In this work, we evaluated four ocean products: the ocean component from one NOAA operational hurricane forecasting model that used ocean initial conditions from climatology, the ocean components from two NOAA experimental models using ocean initial conditions from a data-assimilative operational ocean model, and one US Navy data-assimilative operational ocean model for reference. The upper-ocean metrics used to evaluate the models include mixed layer temperature, mixed layer salinity, ocean heat content and depth-averaged temperature in the top 100 m. The observations used are temperature and salinity profiles from an array of six autonomous underwater gliders deployed in the Caribbean region during the 2019 hurricane season. We found that, even though the four models have good skill in predicting temperature and salinity over the whole observed water column, skill significantly deteriorates for the upper-ocean metrics. In particular, the models failed to capture the barrier layer that was present during the passage of Hurricane Dorian through the glider array. We also found that even small differences in the mixed layer temperature along the storm track on the hurricane models evaluated, led to noticeable differences in the total enthalpy fluxes delivered from the ocean to the atmosphere throughout the storm’s synoptic history. These findings highlight the need to improve the upper-ocean initial conditions and representation in coupled atmosphere-ocean models as part of the larger efforts to improve the various modeling aspects that control the hurricane intensity forecast.

Impedance spectroscopy analysis of thermoelectric modules under actual energy harvesting operating conditions and a small temperature difference

Thermoelectric (TE) devices can convert heat into electricity and have gained great interest as energy harvesters in many applications, such as self-powered sensors, solar TE generators and industrial waste heat recovery. Not many techniques are usually available for their characterization under operating conditions. Consequently, only current-voltage (power output) curves are typically reported to account for their performance, which provide limited information. Impedance spectroscopy, which has been mainly applied to the study of TE modules suspended in air or vacuum, has the advantage to be used under operating conditions. Here, we exploit this advantage and provide an in-depth analysis of the impedance response of standard TE devices when they operate under a small temperature difference. First, we derive the physical models (equivalent circuits) for the two most common operating conditions: (i) constant temperature difference and (ii) constant heat power input. Then, we use the obtained equivalent circuit to successfully fit experimental impedance measurements in both operating modes, which show significant differences. From the fittings, it is possible to obtain the thermal contact resistance between the TE device and the heat exchangers (heat source and heat sink) among other key parameters. In addition, we analyze the variations found in the impedance spectra for different current output levels. Moreover, we show how different electrical resistances, extracted from the impedance results, directly relate to the slope of the I-V curve (power output), and can provide very valuable information about the different processes that determine its value. All these results establish impedance spectroscopy as a very powerful tool to characterize TE devices under operating conditions and as a method that can provide highly valuable insights into their performance.

Numerical study on transient coke deposition and heat transfer characteristics of hydrocarbon fuel in a mini-channel under varying wall heat flux

Dynamic coke deposition has significant influence on flow and heat transfer characteristics of regenerative cooling using hydrocarbon fuel. In the present work, the effect of coke deposition on flow and heat transfer performance of hydrocarbon fuel, n-Decane is numerically investigated under different heating modes including the constant heat flux (CHF), the periodic heat flux (PHF) and staged heat flux (SHF). The results show that as the heating mode varies from CHF to SHF, locally high temperature zones are formed. The flow field structure is varied by dynamic heating condition and coke deposition. The reaction rate of n-Decane also varies periodically with heat flux, resulting in an irregular “S” shaped density distribution. The two main coke precursors i.e., propylene and aromatics are highly sensitive to temperature due to secondary reactions. The thickness of coke deposition increases significantly with time regardless of the heating modes, which indicates that coke deposition process is irreversible. Compared with CHF heating mode, the thickness of coke deposition increases by nearly 25% for the SHF heating mode. Coking mechanism undergoes transition from catalytic coke to lateral coke with increasing temperature. For the CHF heating mode, the heat transfer coefficient increases from 1200 W/(m2·K) to 4400 W/(m2·K) along the flow direction. The PHF and SHF heating modes render higher Nusselt number and heat transfer coefficient than the CHF heating mode as the periodically varying wall heat flux results in locally higher heat flux and smaller temperature difference between the fluid and solid zones. In addition, the thermal conductivity and flow velocity in the regenerative cooling channel are also enhanced for the PHF and SHF heating modes. However, coke deposition leads to serious heat transfer deterioration for PHF and SHF with a decrease of up to 13% in heat transfer coefficient adjacent to the outlet section of the cooling channel. The new heat transfer correlation considering chemical reaction and coke deposition effects of supercritical hydrocarbon fuel is established for different wall heating conditions.

Non-Isothermal Plane Couette Flow and Its Stability in an Anisotropic and Inhomogeneous Porous Layer Underlying a Fluid Layer Saturated by Water

Abstract In this article, the linear stability of nonisothermal plane Couette flow (NPCF) in an anisotropic and inhomogeneous porous layer underlying a fluid layer is investigated. The Darcy model is utilized to describe the flow in the porous layer. The stability analysis indicates that the introduction of media-anisotropy (K*) and media-inhomogeneity (in terms of inhomogeneity parameter A) still renders the isothermal plane Couette flow (IPCF) in such superposed fluid-porous systems unconditionally stable. For NPCF, three different modes, unimodal (porous or fluid mode), bimodal (porous and fluid mode) and trimodal (porous, fluid and porous mode), are observed along the neutral stability curves and characterized by the secondary flow patterns. It has been found that the instability of the fluid-porous system increases on increasing the media permeability and inhomogeneity along the vertical direction. Contrary to natural convection, at d̂=0.2 (d̂=depth of fluid layer/depth of porous layer) and K*=1, in which the critical wavelength shows both increasing and decreasing characteristics with increasing values of A (0≤A≤5), here in the present study, the same continuously decreases with increasing values of A. Finally, scale analysis indicates that the onset of natural convection requires a relatively higher temperature difference (ΔT) between lower and upper plates in the presence of Couette flow. However, by including media anisotropy and inhomogeneity in the porous media, the system becomes unstable even for a small critical temperature difference of about 2 °C.

Study on the thermodynamic and economic performance of power generation cycle with small temperature difference

The low thermal efficiency and low economic benefits of power generation systems under small temperature difference conditions have always hindered their practical operation. In order to explore effective ways to achieve performance optimization of thermodynamic cycle electrical power generating systems under small temperature difference conditions, this study constructs a static analysis model of an organic Rankine cycle with small temperature difference, selects six different commonly used refrigerants, and investigates the influence of key parameters on the thermodynamic and economic performance of the system using difference working fluids. The outcomes indicate that key parameters such as evaporation temperature and condensation temperature play a critical role in the thermodynamic and economic performance of the power generation system. For the working fluids, R227ea provides the highest net power output, while ammonia (R717) is the best performer in regard to system thermal efficiency and economic performance.

Synthesis of PEDOT/CNTs Thermoelectric Thin Films with a High Power Factor.

In this study, we have improved the power factor of conductive polymer nanocomposites by combining layer-by-layer assembly with electrochemical deposition to produce flexible thermoelectric materials based on PEDOT/carbon nanotubes (CNTs)-films. To produce films based on CNTs and PEDOT, a dual approach has been employed: (i) the layer-by-layer method has been utilized for constructing the CNTs layer and (ii) electrochemical polymerization has been used in the synthesis of the conducting polymer. Moreover, the thermoelectric properties were optimized by controlling the experimental conditions including the number of deposition cycles and electropolymerizing time. The electrical characterization of the samples was carried out by measuring the Seebeck voltage produced under a small temperature difference and by measuring the electrical conductivity using the four-point probe method. The resulting values of the Seebeck coefficient S and σ were used to determine the power factor. The structural and morphological analyses of CNTs/PEDOT samples were carried out using scanning electron microscopy (SEM) and Raman spectroscopy. The best power factor achieved was 131.1 (μWm-1K-2), a competitive value comparable to some inorganic thermoelectric materials. Since the synthesis of the CNT/PEDOT layers is rather simple and the ingredients used are relatively inexpensive and environmentally friendly, the proposed nanocomposites are a very interesting approach as an application for recycling heat waste.

Performance analysis and multi-objective optimization of the offshore renewable energy powered integrated energy supply system

Offshore renewable energy technologies offer a promising prospect for energy supply on offshore islands. However, traditional wind and solar energy sources exhibit strong variability and cannot fully meet the energy demands of users. At the same time, the energy demand of users also has great volatility, so the supply side and demand side of energy cannot match well. Existing renewable energy systems often utilize thermal power generation as a stabilizer for the system, however, this approach is difficult to apply in offshore conditions. This study introduces an innovative multi-energy complementary system that integrates seawater freezing desalination, refrigeration and power-hydrogen-ammonia co-generation, driven by ocean thermal energy, wind energy, and solar energy. The system incorporates the use of a new developed small temperature difference ejector refrigeration cycle to stabilize the entire system and produce low-temperature refrigeration. By utilizing the seawater freezing desalination process to minimize energy conversion losses and balancing fluctuations in multiple energy inputs and user demands through ammonia-hydrogen co-production, this approach effectively minimizes energy waste, enhances energy utilization efficiency, and reduces excess power handling. The purpose is to optimize the configuration of the energy conversion subsystem within the multi-energy complementary multi-effect co-generation system, thus improving the economic feasibility and reliability of the system in providing energy and freshwater supply, ultimately achieving the goals of reducing energy waste, achieving high conversion efficiency, and minimizing equipment investment. This study conducts an economic analysis and optimization of a multi-energy complementary system, utilizing a 2 MW-level OTEC subsystem as a stabilizer. Both equipment investment and operating costs are considered in the economy analysis. The carbon emission reduction performance of this system is evaluated. The performance optimization results show that the system achieves an energy storage efficiency of 65.96 %, and the curtailment rate of this system is only 3.99 %, significantly lower than the 10 % curtailment rate in traditional system. The proposed system can meet the annual electricity demand of 33.09 million kWh, as well as a cooling demand of 546.81 million kWh. Under typical conditions, the ocean thermal energy conversion cycle exhibits a power efficiency of 0.85 % and a refrigeration efficiency of 29.10 %. Meanwhile, it annually reduces CO2 emissions by 2.54 million tons, demonstrating significant environmental benefits. This proposed system is mainly applicable to tropical waters with high surface water temperatures and depths of no less than 600 m worldwide. This study offers a practical and economically beneficial solution for energy and freshwater supply on offshore islands.

Theoretical and experimental study on the secondary heat recovery cycle of the mixed working fluid in ocean thermal energy conversion

The small ocean temperature difference causes the power generation efficiency to not be high while the power generation cost is high; this method has not been commercially applied. Therefore, it is particularly important to find a new thermal cycle to improve the cycle efficiency. In this paper, a new cycle of the ocean temperature difference using a non-azeotropic mixed as working fluid is proposed, and a secondary heat recovery device is added to the solution branch separated by the separator. Theoretical analysis and numerical calculation were used to analyze the relationships between cycle efficiency and working fluid concentration, turbine inlet pressure and cold seawater temperature were obtained. The results show that the maximum cycle efficiency can reach 5.25% by adding a secondary heat recovery device. A 10 kW OTEC experimental system was constructed and analyzed; the system performance was obtained. The efficiency of the experimental system was found to be as high as 3.8%, while the experimental value of the test system was lower than the theoretical calculation value. Finally, the heat transfer coefficients of an evaporator and condenser under these conditions were obtained, which provides basic data and technical support for the engineering application of an OTEC plant.

Neutron irradiation effect on superconductivity of Nb3Sn wire - 50 Hz data acquisition system -

A research facility for neutron irradiation effect on superconducting materials has been installed at Oarai center in Tohoku University in 2012 as part of a post irradiation experiment. It consists of a 15.5 T superconducting magnet, a variable temperature insert and a data acquisition and control system. Since the sample holder is cooled by thermal conduction with G-M refrigeration, there is a small temperature difference between positive and negative electrodes and the sample temperature rises during the critical current test due to joule heating. To evaluate the temperature rise precisely, a new data acquisition system with a sampling rate of 50 Hz has been installed. By measuring the temperatures of both electrodes and the voltage at the center of the sample, the temperature of the sample was estimated and the measured critical current (IC) was converted to the current at 4.2 K with a critical surface equation. The comparison of IC at different conditions including neutron irradiated samples was implemented and the neutron irradiation effect on superconductivity of Nb3Sn wire is discussed based on the 4.2 K superconductivity. This paper will describe the outline of the new data acquisition system and some results of neutron irradiated Nb3Sn wires.

Noise characteristics analysis and suppression of optical system based on infrared superconducting single-photon detector

Superconducting nanowire single-photon detector is a kind of refrigerated photon-counting detector with high performance, which can detect extremely weak signals. The noise of optical system is an important factor limiting the sensitivity of infrared superconducting nanowire single-photon detector. In order to improve the sensitivity of infrared detection system, the calculation model of signal-to-noise ratio and background radiation of infrared optical system based on superconducting single photon detector is established and the source of noise in optical system and the radiation emission of black body are analyzed theoretically. The noise characteristics of infrared optical system are quantitatively analyzed by photon counting capability of superconducting nanowire single-photon detector, and the relationship between the photon count rate and temperature under a small temperature difference is explored. An optical system based on infrared superconducting single photon detector is designed. The designed optical system improves the infrared photon coupling efficiency and the signal-to-noise ratio of the superconducting detection system, which are verified theoretically and experimentally , thus reducing the influence of background radiation on the detection system. The results show that the superconducting single-photon detector has high sensitivity to the analysis of the infrared optical system, and the minimum resolved movement distance is 2.74 × 10<sup>–2</sup> mm. The physical coupling efficiency of the optical system and the photon count rate of the detection system are improved by optimizing the optical system, and the signal-to-noise ratio of the system increases by 2.7 times under the same conditions. It is expected that this infrared superconducting nanowire single-photon detector can be used in finer and higher precision detection field.

Deciphering the relationship between temperature and immunity.

Fever is a hallmark symptom of disease across the animal kingdom. Yet, despite the evidence linking temperature fluctuation and immune response, much remains to be discovered about the molecular mechanisms governing these interactions. In patients with rheumatoid arthritis, for instance, it is clinically accepted that joint temperature can predict disease progression. But it was only recently demonstrated that the mitochondria of stimulated T cells can rise to an extreme 50°C, potentially indicating a cellular source of these localized 'fevers'. A challenge to dissecting these mechanisms is a bidirectional interplay between temperature and immunity. Heat shock response is found in virtually all organisms, activating protective pathways when cells are exposed to elevated temperatures. However, the temperature threshold that activates these pathways can vary within the same organism, with human immune cells, in particular, demonstrating differential sensitivity to heat. Such inter-cellular variation may be clinically relevant given the small but significant temperature differences seen between tissues, ages, and sexes. Greater understanding of how such small temperature perturbations mediate immune responses may provide new explanations for persistent questions in disease such as sex disparity in disease prevalence. Notably, the prevalence and severity of many maladies are rising with climate change, suggesting temperature fluctuations can interact with disease on multiple levels. As global temperatures are rising, and our body temperatures are falling, questions regarding temperature-immune interactions are increasingly critical. Here, we review this aspect of environmental interplay to better understand temperature's role in immune variation and subsequent risk of disease.

Turbulence structure of the Rayleigh–Bénard convection using liquid CO2 as working fluid

We studied the evolution of flow structures and large-scale circulations (LSC) in Rayleigh–Bénard convection (RBC) using liquid carbon dioxide as the working medium. In this experiment, a transparent sapphire pressure vessel with observable internal flow was designed, and different temperature differences were applied between the upper and the lower surfaces of the fluid to obtain different Rayleigh numbers (Ra). We employed proper orthogonal decomposition and reconstruction to extract internal flow structures from the shadowgraphy images. We used optical flow techniques to acquire the velocity field of the flow, and we reconstructed the temperature field inside the supercritical fluid using the relationship between shadowgraphy images and refractive index. It is clearly observed that the RBC begins to produce different flow structures under a small temperature difference of 0.4 °C. As the number of Ra increases, the number and the speed of plumes increase, and the morphology of plumes gradually becomes elongated. When Ra exceeds a certain critical value, an LSC structure appears in the flow field, and the plumes translate laterally with the large-scale circulation, and the disorder of the vortex structure in the central flow region increases significantly. Three typical flow structures were observed: (1) single plume, (2) thermal boundary layer traveling waves, and (3) Rayleigh–Taylor instability waves. We believe that the traveling wave structure is the precursor to the single plume. The temperature field analysis of the three structures was carried out, and the velocity of the typical plume was calculated by the optical flow method. It was found that LSC transitioned from oval to square shape with the increase in Ra, and the internal plume Reynolds number slowly increased with the increase in Ra. By the in-depth study of the thermal turbulence characteristics and the coherent structure evolution law of RBC, this paper provides experimental support for revealing the mechanism of enhanced heat transfer in energy system with a liquid CO2 working fluid.

Investigation of non-uniform temperature distribution in air-cooled proton exchange membrane fuel cells with multizone temperature measurement

ABSTRACT Open-cathode air-cooled proton exchange membrane fuel cell stack relies on air fans both for fuel supply and stack cooling. Inappropriate stack thermal management and non-uniform temperature distribution can lead to compromised stack performance, reduced lifespan, and even thermal runaway. Thus, temperature distribution measurement, investigation and analysis are essential for air-cooled PEMFC’s optimized operation and performance. This study uses a multi-zone temperature measurement approach to investigate the impact of air supply method, airflow, and output current on stack temperature distributions. The experimental results reveal that the highest stack temperature occurs at the cathode channel outlet, while the lowest temperature is near the hydrogen inlet. At a 75A load, the maximum temperature difference between the inlet and outlet is 17°C. Increasing fan speed from 4500 to 8800 r/min reduces temperature non-uniformity in cell 10, the most uneven among the 19 cells, by 11.2%. Comparing blowing and suction air supply modes, blowing enhances stack output performance by 2.1%, with smaller temperature differences. Specifically, cell 10 experiences a 7.5°C lower difference at 4500 r/min and a 3.6°C lower difference at 8800 r/min airflow. Under blowing air supply, temperature non-uniformity decreases by 36.95% at 4500 r/min and 29.2% at 8800 r/min.

A multispectral radiometry method for measuring the normal spectral emissivity and temperature

A multispectral radiometry method was developed to simultaneously determine normal spectral emissivity of continuum spectra and temperature of materials. Linear dependence assumption would be a constraint to associate the spectral emissivity to the temperature when spectral radiance for various spectrum was measured within small temperature differences. The methodology was evaluated for different parameter constraints, and validated by seven emissivity hypothesis models. To verify the reliability of the experimental device and the multispectral radiometry method, the spectral emissivities of graphite at high temperatures were verified that the deviations between the official experimental data and the results in this work are all less than 5 %. Besides, the spectral emissivity and temperature of the graphite-carbon fiber composite in the spectral range of 0.3–2.5 μm at 1473–1873 K were measured. The temperature uniformity of the sample front surface was evaluated, and the relative error of the temperature distribution is less than 2 %. The uncertainties of the spectral emissivity and temperature in the studied spectrum are less than5.0 % and 6.0 %, respectively. The method is useful for accurately measuring the sample spectral emissivity without direct temperature measurements at high temperatures.