Small Aperture Telescopes Research Articles

Faint Space Target Information Extraction Based on Small Aperture Telescope in Complex Background

AbstractThere are many problems in space debris monitoring with ground‐based telescopes, such as too many stars in the same field of view, uneven background and optical distortion in the optical system. We propose a two‐stage weak debris detection algorithm. In the first stage, wavelet transform is used to extract different components of three frames of images, and the median of corresponding components of the images is taken respectively to eliminate the influence of stars. In the second stage, an improved version of the faint space target extraction based on principal component analysis. The algorithm uses a smooth‐detection idea to extract target information. Based on a 150 mm aperture telescope, we improved the existing method of faint space debris extraction based on principal component analysis by introducing the smooth‐detection idea, and transformed the target detection problem into the separation problem of sparse matrix and low‐rank matrix. We applied a certain preprocessing consisting of wavelet‐based star removal and median pre‐filtering to keep as little noise and other contaminants as possible. After experimental measurements by observers, the algorithm demonstrated advanced detection capabilities on multiple indicators.

The Simons Observatory: Design, Integration, and Testing of the Small Aperture Telescopes

The Simons Observatory (SO) is a cosmic microwave background survey experiment that includes small-aperture telescopes (SATs) observing from an altitude of 5200 m in the Atacama Desert in Chile. The SO SATs will cover six spectral bands between 27 and 280 GHz to search for primordial B-modes to a sensitivity of σ(r) = 0.002, with quantified systematic errors well below this value. Each SAT is a self-contained cryogenic telescope with a 35° field of view, 42 cm diameter optical aperture, 40 K half-wave plate, 1 K refractive optics, and <0.1 K focal plane that holds >12,000 transition edge sensor detectors. We describe the nominal design of the SATs and present details about the integration and testing for one operating at 93 and 145 GHz.

The Simons Observatory: Combining cross-spectral foreground cleaning with multitracer B -mode delensing for improved constraints on inflation

The Simons Observatory (SO), due to start full science operations in early 2025, aims to set tight constraints on inflationary physics by inferring the tensor-to-scalar ratio r from measurements of cosmic microwave background (CMB) polarization B-modes. Its nominal design including three small-aperture telescopes (SATs) targets a precision σ(r=0)≤0.003 without delensing. Achieving this goal and further reducing uncertainties requires a thorough understanding and mitigation of other large-scale B-mode sources such as Galactic foregrounds and weak gravitational lensing. We present an analysis pipeline aiming to estimate r by including delensing within a cross-spectral likelihood, and demonstrate it for the first time on SO-like simulations accounting for various levels of foreground complexity, inhomogeneous noise and partial sky coverage. As introduced in an earlier SO delensing paper, lensing B-modes are synthesized using internal CMB lensing reconstructions as well as -like cosmic infrared background maps and LSST-like galaxy density maps. We then extend SO’s power-spectrum-based foreground-cleaning algorithm to include all auto- and cross-spectra between the lensing template and the SAT B-modes in the likelihood function. This allows us to constrain r and the parameters of our foreground model simultaneously. Within this framework, we demonstrate the equivalence of map-based and cross-spectral delensing and use it to motivate an optimized pixel-weighting scheme for power spectrum estimation. We start by validating our pipeline in the simplistic case of uniform foreground spectral energy distributions. In the absence of primordial B-modes, we find that the 1σ statistical uncertainty on r, σ(r), decreases by 37% as a result of delensing. Tensor modes at the level of r=0.01 are successfully detected by our pipeline. Even when using more realistic foreground models including spatial variations in the dust and synchrotron spectral properties, we obtain unbiased estimates of r both with and without delensing by employing the moment-expansion method. In this case, uncertainties are increased due to the higher number of model parameters, and delensing-related improvements range between 27% and 31%. These results constitute the first realistic assessment of the delensing performance at SO’s nominal sensitivity level. Published by the American Physical Society 2024

Deep Optical Emission-line Images of Nine Known and Three New Galactic Supernova Remnants

Deep optical emission-line images are presented for nine known plus three new Galactic supernova remnants (SNRs), all but one having at least one angular dimension >1°. Wide-field images taken in Hα and [O iii] λ5007 reveal many new and surprising remnant structures including large remnant shock extensions and “breakout” features not seen in published optical or radio data. These images represent over 12,000 individual images totaling more than 1000 hr of exposure time taken over the last 2 yr mainly using small aperture telescopes, which detected fainter nebular line emissions than published emission-line images. During the course of this imaging program, we discovered three new SNRs, namely G107.5-5.1 (the Nereides Nebula), G209.9-8.2, and G210.5+1.3, two of which have diameters >1.°5. In addition to offering greater structural detail on the nine already known SNRs, a key finding of this study is the importance of [O iii] emission-line imaging for mapping the complete shock emissions of Galactic SNRs.

The Simons Observatory: Pipeline comparison and validation for large-scale B-modes

Context. The upcoming Simons Observatory Small Aperture Telescopes aim at achieving a constraint on the primordial tensor-to-scalar ratio r at the level of σ(r = 0)≲0.003, observing the polarized CMB in the presence of partial sky coverage, cosmic variance, inhomogeneous non-white noise, and Galactic foregrounds. Aims. We present three different analysis pipelines able to constrain r given the latest available instrument performance, and compare their predictions on a set of sky simulations that allow us to explore a number of Galactic foreground models and elements of instrumental noise, relevant for the Simons Observatory. Methods. The three pipelines employ different combinations of parametric and non-parametric component separation at the map and power spectrum levels, and use B-mode purification to estimate the CMB B-mode power spectrum. We applied them to a common set of simulated realistic frequency maps, and compared and validated them with focus on their ability to extract robust constraints on the tensor-to-scalar ratio r. We evaluated their performance in terms of bias and statistical uncertainty on this parameter. Results. In most of the scenarios the three methodologies achieve similar performance. Nevertheless, several simulations with complex foreground signals lead to a &gt; 2σ bias on r if analyzed with the default versions of these pipelines, highlighting the need for more sophisticated pipeline components that marginalize over foreground residuals. We show two such extensions, using power-spectrum-based and map-based methods, that are able to fully reduce the bias on r below the statistical uncertainties in all foreground models explored, at a moderate cost in terms of σ(r).

Multiband photometric observations of GEO objects through Sloan filters

With the precipitous growth of the population of objects in Earth's orbit, all major space agencies and companies have made space surveillance a priority to ensure the safety of space missions. With the application of the methods of space surveillance, this article aims to characterize the population of objects in the Geostationary Earth Orbit (GEO) using optical measurements across multiple spectral bands. The study takes place in a context in which the existence of space debris poses a continuous hazard to the operations of active satellites in GEO. Photometric observations of GEO objects using Sloan filters were obtained with SCUDO, a small-aperture telescope part of the Sapienza network. Observations are divided into categories, including 11 objects: rocket bodies (4), defunct satellites (3), and active satellites (4). The spectral response of these objects has been analyzed leading to the identification of a photometric signature which was repeated for two Eutelsat satellites observed under same conditions. All the observed targets resulted in a lower magnitude in the near-infrared. Color indexes also indicate that they are redder than the Sun. This is particularly evident for SL-12 rocket bodies, whose g’-z’ reaches 1.5.

Error Analysis for Rotating-drift-scan Charge-coupled Device Observation of Near-Earth Asteroids

The apparent velocities of near-Earth asteroids (NEAs) are usually high when they pass by Earth. Observing these fast-moving objects with long exposure times would cause their images to streak and significantly decrease the precision of astronomical measurements. The rotating-drift-scan (RDS) charge-coupled device technique is a promising approach to observe fast-moving NEAs during their close approaches to Earth. By rotating the camera of a telescope, an NEA can be observed in the time delay integration mode. This allows the asteroid to be imaged as a point source, even with a long exposure time. Here, we thoroughly present the RDS follow-up observation and orbit determination of a newly discovered NEA 2023 BJ7. This technique makes an impactful contribution to improving the NEA's orbit accuracy by extending the observation arc. A detailed statistical analysis of the astrometric error was conducted, revealing that RDS observations can achieve a competitive accuracy with an rms error of 0.″24 in right ascension and 0.″32 in declination. The instability of the telescope is thought to be the main reason affecting the internal precision. Furthermore, the RDS technique excels at observing fast-moving NEAs, as well as newly discovered NEAs without accurate ephemerides. For NEAs with rates of motion exceeding 10 deg day−1, the rms of RDS observation residuals is 0.″35 in the along-track direction and 0.″23 in the cross-track. With this technique, a network of small-aperture telescopes would substantially benefit our global NEAs monitoring system to ensure Earth’s safety from any asteroid impacts.

The Simons Observatory: Cryogenic half wave plate rotation mechanism for the small aperture telescopes.

We present the requirements, design, and evaluation of the cryogenic continuously rotating half-wave plate (CHWP) for the Simons Observatory (SO). SO is a cosmic microwave background polarization experiment at Parque Astronómico de Atacama in northern Chile that covers a wide range of angular scales using both small (⌀0.42m) and large (⌀6m) aperture telescopes. In particular, the small aperture telescopes (SATs) focus on large angular scales for primordial B-mode polarization. To this end, the SATs employ a CHWP to modulate the polarization of the incident light at 8Hz, suppressing atmospheric 1/f noise and mitigating systematic uncertainties that would otherwise arise due to the differential response of detectors sensitive to orthogonal polarizations. The CHWP consists of a 505mm diameter achromatic sapphire HWP and a cryogenic rotation mechanism, both of which are cooled down to ∼50K to reduce detector thermal loading. Under normal operation, the HWP is suspended by a superconducting magnetic bearing and rotates with a constant 2Hz frequency, controlled by an electromagnetic synchronous motor. We find that the number of superconductors and the number of magnets that make up the superconducting magnetic bearing are important design parameters, especially for the rotation mechanism's vibration performance. The rotation angle is detected through an angular encoder with a noise level of 0.07 μrad s. During a cooldown process, the rotor is held in place by a grip-and-release mechanism that serves as both an alignment device and a thermal path. In this paper, we provide an overview of the SO SAT CHWP: its requirements, hardware design, and laboratory performance.

The Simons Observatory: Development and Optical Evaluation of Achromatic Half-Wave Plates

The Simons Observatory (SO) experiment is a cosmic microwave background (CMB) experiment located in the Atacama Desert, Chile. The SO’s small aperture telescopes (SATs) consist of three telescopes designed for precise CMB polarimetry at large angular scales. Each SAT uses a cryogenic rotating half-wave plate (HWP) as a polarization modulator to mitigate atmospheric 1/f noise and other systematics. To realize efficient polarization modulation over the observation bands, we fabricated an achromatic HWP (AHWP) consisting of three sapphire plates with anti-reflection coatings. The AHWP is designed to have broadband modulation efficiency and transmittance. This paper reports on the design and the preliminary characterization of the AHWPs for SATs.

The Simons Observatory: Beam Characterization for the Small Aperture Telescopes

We use time-domain simulations of Jupiter observations to test and develop a beam reconstruction pipeline for the Simons Observatory Small Aperture Telescopes. The method relies on a mapmaker that estimates and subtracts correlated atmospheric noise and a beam fitting code designed to compensate for the bias caused by the mapmaker. We test our reconstruction performance for four different frequency bands against various algorithmic parameters, atmospheric conditions, and input beams. We additionally show the reconstruction quality as a function of the number of available observations and investigate how different calibration strategies affect the beam uncertainty. For all of the cases considered, we find good agreement between the fitted results and the input beam model within an ∼1.5% error for a multipole range ℓ = 30–700 and an ∼0.5% error for a multipole range ℓ = 50–200. We conclude by using a harmonic-domain component separation algorithm to verify that the beam reconstruction errors and biases observed in our analysis do not significantly bias the Simons Observatory r-measurement

The Simons Observatory: A fully remote controlled calibration system with a sparse wire grid for cosmic microwave background telescopes.

For cosmic microwave background (CMB) polarization observations, calibration of detector polarization angles is essential. We have developed a fully remote controlled calibration system with a sparse wire grid that reflects linearly polarized light along the wire direction. The new feature is a remote-controlled system for regular calibration, which has not been possible in sparse wire grid calibrators in past experiments. The remote control can be achieved by two electric linear actuators that load or unload the sparse wire grid into a position centered on the optical axis of a telescope between the calibration time and CMB observation. Furthermore, the sparse wire grid can be rotated by using a motor. A rotary encoder and a gravity sensor are installed on the sparse wire grid to monitor the wire direction. They allow us to achieve detector polarization angle calibration with an expected systematic error of 0.08°. The calibration system will be installed in small-aperture telescopes at Simons Observatory.

Underwater Single-Photon Lidar Equipped with High-Sampling-Rate Multi-Channel Data Acquisition System

Lidar has emerged as an important technology for the high-precision three-dimensional remote sensing of the ocean. While oceanic lidar has been widely deployed on various platforms, its underwater deployment is relatively limited, despite its significance in deep-sea exploration and obstacle avoidance for underwater platforms. Underwater lidar systems must meet stringent requirements for high performance, miniaturization, and high integration. Single-photon lidar, by elevating the detection sensitivity to the single-photon level, enables high-performance detection under the condition of a low-pulse-energy laser and a small-aperture telescope, making it a stronger candidate for underwater lidar applications. However, this imposes demanding requirements for the data acquisition system utilized in single-photon lidar systems. In this work, a self-developed multi-channel acquisition system (MCAS) with a high-resolution and real-time histogram statistics capability was developed. By utilizing field-programmable gate array (FPGA) technology, a method that combines coarse counters with multi-phase clock interpolation achieved an impressive resolution of 0.5 ns and enabled a time of flight duration of 1.5 μs. To address counting instability, a dual-counter structure was adopted in the coarse counter, and real-time histogram statistics were achieved in the data acquisition system through a state machine. Furthermore, the non-uniform phase shift of the clock was analyzed, and a correction algorithm based on code density statistics was proposed to mitigate the periodic modulation of the backscattered signal, with the effectiveness of the algorithm demonstrated through experimental results. The robustness and stability of the MCAS were validated through an underwater experiment. Ultimately, the development of this compact acquisition system enables the implementation of underwater single-photon lidar systems, which will play a crucial role in underwater target imaging, obstacle avoidance in underwater platforms, and deep-sea marine environment monitoring.

Using the Optical Pointing System to Build the Pointing Model of the Tianma 13 m Telescope

This paper describes the method of using the optical telescope to assist the Tianma 13 m radio telescope for pointing measurement and establishing the pointing error correction model. For small-aperture telescopes, there are few target sources for pointing and calibration, and it is difficult to establish a pointing model by radio method to cover the whole sky area. The Tianma 13 m radio telescope of Shanghai Astronomical Observatory is used to conduct optical-assisted pointing measurement research. A set of optical pointing system was installed on the back frame of Tianma 13 m antenna, which obtained a repeatable measurement accuracy better than 3”. In addition, through the analysis of the factors affecting the antenna pointing, a pointing error correction model containing 8 error terms, as well as the optical axis and electrical axis deviation models were established. The pointing model was brought into the antenna servo control system to cross-scan the calibration target radio source, and a pointing error of about 5” was obtained. This research can provide a reference method for high-precision pointing modeling.

Optical sparse telescope arrays and scintillation noise

ABSTRACT Fresnel propagation of starlight after it passes through high altitude turbulence in the Earth’s atmosphere results in random fluctuations of the intensity at ground level, known as scintillation. This effect adds random noise to photometric measurements with ground-based optical telescopes. Spatial correlation of the intensity fluctuations means that the fractional photometric noise due to scintillation may be substantially smaller for a sparse array of small aperture telescopes than for a single large aperture of the same total area. Assuming that the photometric noise for each telescope is independent, averaging the light curves measured by N telescopes reduces the noise by a factor of $\sqrt{N}$. For example, for bright stars, the signal-to-noise ratio of a 2.54 m telescope can be achieved for an array of thirty 20 cm telescopes if the scintillation noise measured for each telescope is uncorrelated. In this paper, we present results from simulation and from observations at the Isaac Newton Telescope. These explore the impact that several parameters have on the measured correlation of the scintillation noise between neighbouring telescopes. We show that there is significant correlation between neighbouring telescopes with separations parallel to the wind direction of the dominant high altitude turbulent layer. We find that the telescopes in an array should be separated by at least twice their aperture diameter so that there is negligible correlation of the photometric noise. We discuss additional benefits of using sparse telescope arrays, including reduced cost and increased field of view.

An Integrated Off-Line Echo Signal Acquisition System Implemented in SoC-FPGA for High Repetition Rate Lidar

High repetition rate lidar is typically equipped with a low-energy, high repetition rate laser, and small aperture telescopes. Therefore, it is small, compact, low-cost, and can be networked for observation. However, its data acquisition and control functions are generally not specially designed, and the data acquisition, storage, and control programs need to be implemented on an IPC (Industrial Personal Computer), which increases the complexity and instability of the lidar system. Therefore, this paper designs an integrated off-line echo signal acquisition system (IOESAS) for lidar developed based on SoC FPGA (System-On-Chip Field Programmable Gate Array). Using a hardware–software co-design approach, the system is implemented in a heterogeneous multi-core chip ZYNQ-7020 (integrated FPGA and ARM). The FPGA implements dual-channel echo data acquisition (gated counting and hardware accumulation). At the same time, the ARM performs laser control and monitoring, laser pointing control, pulse energy monitoring, data storage, and wireless transmission. Offline data acquisition and control software was developed based on LabVIEW, which can remotely control the status of the lidar and download the echo data stored in IOESAS. To verify the performance of the data acquisition system, IOESAS was compared with the photon counting card P7882 and MCS-PCI, respectively. The test results show that they are in good agreement; the linear correlation coefficients were 0.99967 and 0.99884, respectively. IOESAS was installed on lidar outdoors for continuous detection, and the system was able to work independently and stably in different weather conditions, and control functions were tested normally. The gating delay and gating width time jitter error are ±5 ns and ±2 ns, respectively. The IOESAS is now used in several small lidars for networked observations.

Plastic Laminate Antireflective Coatings for Millimeter-Wave Optics in BICEP Array

The BICEP/Keck series of experiments target the cosmic microwave background at degree-scale resolution from the South Pole. Over the next few years, the “Stage-3” BICEP Array (BA) telescope will improve the program’s frequency coverage and sensitivity to primordial B-mode polarization by an order of magnitude. The first receiver in the array, BA1, began observing at 30/40 GHz in early 2020. The next two receivers, BA2 and BA3, are currently being assembled and will map the southern sky at frequencies ranging from 95 to 150 GHz. Common to all BA receivers is a refractive, on-axis, cryogenic optical design that focuses microwave radiation onto a focal plane populated with antenna-coupled bolometers. High-performance antireflective coatings up to 760 mm in aperture are needed for each element in the optical chain, and must withstand repeated thermal cycles down to 4 K. Here, we present the design and fabrication of the 30/40 GHz anti-reflection coatings for the recently deployed BA1 receiver, with indices matched to its various polyethylene, nylon and alumina optical components. We describe an epoxy coating technique designed for alumina optics, which achieves better than 80% transmission at room temperature. For polyethylene optical elements, we present a new heat-compression approach that allows low-density polytetrafluoroethylene AR layers to reach sub-percent reflected power. We describe the planned use of these methods for the next BA cryostats, which may inform technological choices for future small-aperture telescopes of the CMB-S4 experiment.

Faint Space Debris Detection Algorithm Based on Small Aperture Telescope Detection System

Ground-based optical observation has unique advantages in space target observation. However, due to the weak light-gathering ability of small-aperture optoelectronic observation telescopes, the space debris in the image is weak and easily drowned in noise. In order to solve the above problems, we use digital image processing technology to extract faint space debris. We propose a high detection rate space debris automatic extraction algorithm, aiming to automatically detect space debris. We first establish a new space target description model. Our algorithm is mainly divided into two stages. The purpose of the first stage is to reduce the influence of a large number of stars. We perform wavelet transform and guided filtering for three consecutive frames, and the reconstructed wavelet that takes the median value can achieve the effect of eliminating stars. In the second stage, we adopt the method of robust principal component analysis and attribute the problem of target detection to the problem of separating the target and background of a single frame of image. After a large number of experimental results analysis, it is proved that the algorithm can effectively detect faint debris in the monitoring system of small aperture telescope, and has high precision and low computational complexity.

The near ultraviolet transient surveyor (NUTS): An ultraviolet telescope to observe variable sources

Observing the ultraviolet (UV) sky for time-variable phenomena is one of the many exciting science goals that can be achieved by a relatively small aperture telescope in space. The Near Ultraviolet Transient Surveyor (NUTS) is a wide-field ($3^\circ$) imager with a photon-counting detector in the near-UV (NUV, 200-300 nm), to be flown on an upcoming small satellite mission. It has a Ritchey-Chretien (RC) telescope design with correction optics to enable wide-field observations while minimizing optical aberrations. We have used an intensified CMOS detector with a solar blind photocathode, to be operated in photon-counting mode. The main science goal of the instrument is the observation of transient sources in the UV, including flare stars, supernovae, and active galactic nuclei. NUTS's aperture size and effective area enable observation of relatively unexplored, brighter parts of the UV sky which are usually not accessible to larger missions. We have designed, fabricated, and assembled the instrument, and the final calibrations and environmental tests are being carried out. In this paper, we provide the scientific motivation and technical overview of the instrument and describe the assembly and calibration steps.

The Simons Observatory: A large-diameter truss for a refracting telescope cooled to 1 K.

We present the design and measured performance of a new carbon fiber strut design that is used in a cryogenically cooled truss for the Simons Observatory small aperture telescope. The truss consists of two aluminum 6061 rings separated by 24 struts. Each strut consists of a central carbon fiber tube fitted with two aluminum end caps. We tested the performance of the strut and truss by (i) cryogenically cycling and destructively pull-testing strut samples, (ii) non-destructively pull-testing the final truss, and (iii) measuring the thermal conductivity of the carbon fiber tubes. We found that the strut strength is limited by the mounting fasteners and the strut end caps, not the epoxy adhesive or the carbon fiber tube. This result is consistent with our numerical predictions. Our thermal measurements suggest that the conductive heat load through the struts (from 4 to 1K) will be less than 1 mW. This strut design may be a promising candidate for use in other cryogenic support structures.

The astrometric results of observations of fast-moving NEAs during close approach to the Earth

Current investigation is devoted to ongoing follow-up observations of fast-moving near-Earth asteroids (NEAs) carried out with Rotating-drift-scan CCD technique on small-aperture telescopes in China and Ukraine. The observations were obtained during closest approach (CA) to the Earth in order to get more observational points and extend observational arc. It is especially important for newly discovered NEAs when high-precision astrometry is required to determine and improve the orbital elements making them recoverable in next apparitions. The latest astrometric results of NEAs observations, particularly for newly discovered ones, are presented and analyzed in order to refine their orbits and estimate possible recovery in next CA. The comparative analysis of astrometric positions and orbital elements were done regarding to International Astronomical Union Minor Planet Center database and JPL's HORIZONS ephemerides system. The residual differences (O – C) often show high values for newly discovered NEAs during observation date which explained by lack of available observations for reliable calculations of ephemerid positions. The data for such NEAs is presented and orbital calculations are done.