Slug Mucosal Irritation Test Research Articles

Enhancing Mucoadhesive Properties of Gelatin through Chemical Modification with Unsaturated Anhydrides.

Gelatin is a water-soluble natural polyampholyte with poor mucoadhesive properties. It has traditionally been used as a major ingredient in many pharmaceuticals, including soft and hard capsules, suppositories, tissue engineering, and regenerative medicine. The mucoadhesive properties of gelatin can be improved by modifying it through conjugation with specific adhesive unsaturated groups. In this study, gelatin was modified by reacting with crotonic, itaconic, and methacrylic anhydrides in varying molar ratios to yield crotonoylated-, itaconoylated-, and methacryloylated gelatins (abbreviated as Gel-CA, Gel-IA, and Gel-MA, respectively). The successful synthesis was confirmed using 1H NMR, FTIR spectroscopies, and colorimetric TNBSA assay. The effect of chemical modification on the isoelectric point was studied through viscosity and electrophoretic mobility measurements. The evolution of the storage (G') and loss (G'') moduli was employed to determine thermoreversible gelation points of modified and unmodified gelatins. The safety of modified gelatin derivatives was assessed with an in vivo slug mucosal irritation test (SMIT) and an in vitro MTT assay utilizing human pulmonary fibroblasts cell line. Two different model dosage forms, such as physical gels and spray-dried microparticles, were prepared and their mucoadhesive properties were evaluated using a flow-through technique with fluorescent detection and a tensile test with ex vivo porcine vaginal tissues and sheep nasal mucosa. Gelatins modified with unsaturated groups exhibited superior mucoadhesive properties compared to native gelatin. The enhanced ability of gelatin modified with these unsaturated functional groups is due to the formation of covalent bonds with cysteine-rich subdomains present in the mucin via thiol-ene click Michael-type addition reactions occurring under physiologically relevant conditions.

Polyaphron Formulations Stabilised with Different Water-Soluble Polymers for Ocular Drug Delivery.

As drug delivery to the eye has evolved over the last decades, researchers have explored more effective treatments for ocular diseases. Despite this, delivering drugs to the cornea remains one of the most problematic issues in ophthalmology due to the poor permeability of the cornea and tear clearance mechanisms. In this study, four different types of polyaphron formulations are prepared with 10% poloxamer 188 (P188), 10% poly(2-ethyl-2-oxazoline), 1% polyquaternium 10, and 3% sodium carboxymethylcellulose solutions mixed with 1% Brij® L4 in a caprylic/capric triglycerides solution. Their physicochemical characteristics, rheological properties, and stability are assessed. Additionally, a polyaphron with 3% polyquaternium 10 was prepared for the assessment of ex vivo corneal retention along with four other polyaphrons. The best retention on the ex vivo cornea was displayed by the 3% polyquaternium 10-based formulation. The 10% poloxamer 188 along with 1% polyquaternium 10-based polyaphrons appeared to be the most stable among the four prepared formulations. A toxicological evaluation of these formulations was performed using a slug mucosal irritation test and bovine corneal opacity and permeability assay, with all four polyaphrons proving good biocompatibility with ocular tissues. The developed drug delivery systems demonstrated an excellent potential for ocular drug delivery.

Potential Mucosal Irritation Discrimination of Surface Disinfectants Employed against SARS-CoV-2 by Limacus flavus Slug Mucosal Irritation Assay.

Preventive measures have proven to be the most effective strategy to counteract the spread of the SARS-CoV-2 virus. Among these, disinfection is strongly suggested by international health organizations’ official guidelines. As a consequence, the increase of disinfectants handling is going to expose people to the risk of eyes, mouth, nose, and mucous membranes accidental irritation. To assess mucosal irritation, previous studies employed the snail Arion lusitanicus as the mucosal model in Slug Mucosal Irritation (SMI) assay. The obtained results confirmed snails as a suitable experimental model for their anatomical characteristics superimposable to the human mucosae and the different easily observed readouts. Another terrestrial gastropod, Limacus flavus, also known as “ Yellow slug “, due to its larger size and greater longevity, has already been proposed as an SMI assay alternative model. In this study, for the first time, in addition to the standard parameters recorded in the SMI test, the production of yellow pigment in response to irritants, unique to the snail L. flavus, was evaluated. Our results showed that this species would be a promising model for mucosal irritation studies. The study conducted testing among all those chemical solutions most commonly recommended against the SARS-CoV-2 virus.

Maleimide-functionalised PLGA-PEG nanoparticles as mucoadhesive carriers for intravesical drug delivery

Low permeability of the urinary bladder epithelium, poor retention of the chemotherapeutic agents due to dilution and periodic urine voiding as well as intermittent catheterisations are the major limitations of intravesical drug delivery used in the treatment of bladder cancer. In this work, maleimide-functionalised poly(lactide-co-glycolide)-block-poly(ethylene glycol) (PLGA-PEG-Mal) nanoparticles were developed. Their physicochemical characteristics, including morphology, architecture and molecular parameters have been investigated by means of dynamic light scattering, transmission electron microscopy and small-angle neutron scattering techniques. It was established that the size of nanoparticles was dependent on the solvent used in their preparation and molecular weight of PEG, for example, 105 ± 1 nm and 68 ± 1 nm particles were formed from PLGA20K-PEG5K in dimethyl sulfoxide and acetone, respectively. PLGA-PEG-Mal nanoparticles were explored as mucoadhesive formulations for drug delivery to the urinary bladder. The retention of fluorescein-loaded nanoparticles on freshly excised lamb bladder mucosa in vitro was evaluated and assessed using a flow-through fluorescence technique and Wash Out50 (WO50) quantitative method. PLGA-PEG-Mal nanoparticles (NPs) exhibited greater retention on urinary bladder mucosa (WO50 = 15 mL) compared to maleimide-free NPs (WO50 = 5 mL). The assessment of the biocompatibility of PEG-Mal using the slug mucosal irritation test revealed that these materials are non-irritant to mucosal surfaces.

Acrylated Eudragit® E PO as a novel polymeric excipient with enhanced mucoadhesive properties for application in nasal drug delivery

Eudragit® E PO (EPO) is a terpolymer based on N,N-dimethylaminoethyl methacrylate with methylmethacrylate and butylmethacrylate, produced by Evonik Industries AG as a pharmaceutical excipient. In this work, EPO was chemically modified through reaction with acryloyl chloride. The successful modification of EPO was confirmed by FTIR, NMR-spectroscopy, elemental and thermal analysis. The degree of acrylation was determined by permanganatometric titration. The slug mucosal irritation test was used to demonstrate non-irritant nature of EPO and its acrylated derivatives (AEPO). The mucoadhesive properties of EPO and AEPO were evaluated using freshly excised sheep nasal mucosa and it was demonstrated that acrylated polymers facilitated greater retention of sodium fluorescein on mucosal surfaces compared to solution mixture of this dye solution with EPO as well as free dye.

Assessment of ocular discomfort caused by 5 shampoos using the Slug Mucosal Irritation test

Assessment of ocular discomfort caused by veterinary care products is less legitimately regulated than that caused by human care products. The Slug Mucosal Irritation (SMI) assay was adapted to evaluate canine hygiene shampoos to predict ocular discomfort.Experiments were performed using four commercial canine shampoos, a baby care product, and two controls (ArtTear® and BAC1%). Groups of 3 slugs were tested with 5% dilution of the 7 test substances.The negative control (ArtTear®) was the best tolerated. The baby care product Mixa bébé as well as Douxo Entretien Démêlant and Phlox Shampooing Entretien were classified to cause mild ocular discomfort. Together with the positive control (BAC 1%), Shampooing Physiologique Virbac and Physiovet Shampooing were considered to cause severe ocular discomfort.Different intensities of ocular discomfort were measured for veterinary care products. The SMI model was considered as a reproducible and adaptable evaluation method for screening veterinary care products causing ocular discomfort.

Chitosan-isoniazid conjugates: Synthesis, evaluation of tuberculostatic activity, biodegradability and toxicity

Novel water-soluble chitosan-isoniazid conjugates were synthesized by two methods: (1) the carbodiimide method using isoniazid (INH) and N-(2-carboxyethyl)chitosan (CEC), and (2) the reaction between INH and N-(3-chloro-2-hydroxypropyl)chitosan (CHPC). The solubility of the conjugates under physiological conditions was enhanced by phosphorylation. Method (1) is preferable in terms of obtaining conjugates with a high content of active substance; depending on reaction conditions, the degree of substitution in the INH-CEC conjugates varies from 0.08 tо 0.39. Ultrasound treatment increased the reaction rate by a factor of 1.3–1.5, but caused partial degradation of the polymer. Consecutive modification led to a considerable decrease in polymer biodegradability in the following order: chitosan>CEC or CHPC>conjugate. In vitro screening of the antimicrobial activity against Mycobacterium tuberculosis H37Rv demonstrated a comparable or slightly higher minimum inhibitory concentration for conjugates than for INH itself (0.20, 0.25, and 1.05μg INH/mL for INH, CEC-INH, and CHPC-INH, respectively). A slug mucosal irritation test employing Limax flavus revealed a lower toxicity for the conjugates than for INH by a factor of 3–4; the most noticeable toxicity decrease was observed for the conjugates obtained by method (1). Studies of acute toxicity in mice revealed a 3–4-fold increase in median lethal dose for the conjugates compared with INH (LD50 210, 850, and 650mg INH/kg for INH, CEC-INH, and CHPC-INH, respectively).

In vitro evaluation of gentamicin- and vancomycin-containing minitablets as a replacement for fortified eye drops

Objective: Ocular bioadhesive minitablets containing gentamicin and vancomycin were developed using different powder mixtures of pregelatinized starch and Carbopol (physical or cospray-dried mixtures). Methods: Drug content, antimicrobial activity, and radical formation of the powders used for tablet preparation were evaluated immediately and 30 days after gamma sterilization. Tablet properties and in vitro drug release from the sterilized minitablets were determined. Storage stability of vancomycin and gentamicin in sterilized bioadhesive mixtures was examined by LC–UV/MS and a microbiological assay, respectively. A bioadhesive powder mixture containing only vancomycin was irradiated by X electron-magnetic radiation to evaluate vancomycin stability following sterilization through irradiation. Results: The antimicrobial activity of gentamicin against Staphylococcus epidermidis was not altered in comparison to nonsterilized formulations. Only after an overkill dose of 50 kGy, the concentration of vancomycin decreases to an extent that was pharmaceutically significant. No significant difference in radiation stability between drug substance and product (i.e., powder mixture) was observed. A shift in stability profile was not observed at 6 weeks after irradiation. All other degradation products were present only in small quantities not exceeding 1.0%. The in vitro drug release from the minitablets prepared with physical powder mixtures of pregelatinized starch and Carbopol® 974P NF (96 : 4) was faster compared to the cospray-dried mixtures of starch with Carbopol® 974P NF (ratio: 95:5 and 85:15). The electron paramagnetic resonance signals of the radicals formed during sterilization were still visible after storage for 30 days. The slug mucosal irritation test indicated mild irritation properties of the bioadhesive powder mixtures although no tissue damage was observed.

Designing Temperature-Responsive Biocompatible Copolymers and Hydrogels Based on 2-Hydroxyethyl(meth)acrylates

Free-radical copolymerization of 2-hydroxyethyl methacrylate with 2-hydroxyethyl acrylate can be successively utilized for the synthesis of water-soluble polymers and hydrogels with excellent physicochemical properties, thus showing promise for pharmaceutical and biomedical applications. In the work presented it has been demonstrated that water-soluble copolymers based on 2-hydroxyethyl methacrylate and 2-hydroxyethyl acrylate exhibit lower critical solution temperature in aqueous solutions, whereas the corresponding high molecular weight homopolymers do not have this unique property. The temperature-induced transitions observed upon heating the aqueous solutions of these copolymers proceed via liquid-liquid phase separation. The hydrogels were also synthesized by copolymerizing 2-hydroxyethyl methacrylate and 2-hydroxyethyl acrylate in the absence of a bifunctional cross-linker. The cross-linking of these copolymers during copolymerization is believed to be due to the presence of bifunctional admixtures or transesterification reactions. Transparency, swelling behavior, mechanical properties, and porosity of the hydrogels are dependent upon the monomer ratio in the copolymers. Hydrogel samples containing more 2-hydroxyethyl methacrylate are less transparent, have lower swelling capacity, higher elastic moduli, and pores of smaller size. The assessment of the biocompatibility of the copolymers using the slug mucosal irritation test revealed that they are also less irritant than poly(acrylic acid).

Successful prevalidation of the slug mucosal irritation test to assess the eye irritation potency of chemicals

A previous 'in house' validation study showed that the SMI assay can be used as an alternative to the in vivo Draize eye irritation test. The aim of this multi-centre study with four participating laboratories was to assess the transferability and inter-laboratory variability of the assay using 20 reference chemicals covering the whole irritancy range. The eye irritation potency of the chemicals was assessed by measuring the amount of mucus produced during a 60-min contact period with a 1% dilution, and a second 60-min treatment with a 3.5% dilution. After each contact period the protein release from the mucosal surface was measured. Linear discriminant equations were used to convert the results into the corresponding EU eye irritation categories (NI, R36 and R41). All the non-irritants were predicted correctly by the four laboratories resulting in a 100% specificity. For the R36 compounds a correct classification rate of 89% (VITO) and 100% (SPL, JNJ and UGent) was obtained. The R41 compounds were classified correctly in 78% of the cases for VITO, 89% for SPL and JNJ and 100% for UGent. We can conclude that the SMI assay is a relevant, easily transferable and reproducible alternative to predict the eye irritation potency of chemicals.

Slug species- and population-specific effects on the end points of the Slug Mucosal Irritation test

The Slug Mucosal Irritation test seems to be a promising method for the evaluation of the local tolerance of products applied to the mucosa. Furthermore, the Slug Mucosal Irritation test is a reliable method to classify chemicals accurately into three eye irritation categories based on the mucus production and the score for tissue damage. Until now the slug Arion lusitanicus collected in Belgium was always used as test organism. The present study investigated the effects of the slug population and species on the end points of the test and on the eye irritation classification. For this purpose, the eye irritation/damage test procedure and eye reference chemicals were used. Comparison of the results of one Belgian and two Swiss A. lusitanicus populations indicated that the geographic and ecological origins of slug populations did neither influence the mucus production, nor the score for tissue damage. Slug species-specific effects on the test end points were investigated by comparing the data of Belgian Limax flavus with corresponding data of Belgian A. lusitanicus. L. flavus produced more mucus than A. lusitanicus, so that the mucus production cut-off values had to be increased. Therefore, the results indicated that the test procedure and prediction model have to be optimised and validated, if other slug species are used instead of A. lusitanicus.

The evaluation of the local tolerance of vaginal formulations containing dapivirine using the Slug Mucosal Irritation test and the rabbit vaginal irritation test

The purpose of this study was to evaluate the local tolerance of vaginal gels (three gels containing dapivirine, the placebo gel, and Conceptrol ®) with the Slug Mucosal Irritation test and to compare the results with those of the rabbit vaginal irritation test. The irritation potential on the slug mucosa was assessed by the mucus production caused by a repeated treatment for 5 successive days. Additionally, membrane damage was estimated by the protein and enzyme release. By means of a classification prediction model the formulations were classified into four irritation classes. The effect of a 10-day intravaginal application of the gels on the rabbit vaginal and cervical mucosa was evaluated by means of macroscopic and microscopic examination. The placebo and dapivirine gels induced no irritation of the slug mucosa (low mucus production and protein release, no enzyme release) and no vaginal or cervical irritation in rabbits. Conceptrol ® caused severe irritation of the slug mucosa (increased mucus production, protein release, and enzyme release) and irritation of the rabbit vagina and cervix. The results obtained with the Slug Mucosal Irritation test were comparable to those of the rabbit vaginal irritation test.

Refinement of the Slug Mucosal Irritation test as an alternative screening test for eye irritation

The objective of this study was to limit the test procedure time of the Slug Mucosal Irritation test to one day and to determine whether it is a relevant and reliable method to predict the eye irritation potential of chemicals. The irritation potential of several eye reference chemicals can be estimated by the amount of mucus produced when tested at a 1% concentration (60 min). Since some in vivo irritating chemicals did not influence this endpoint the effect of increasing concentrations on membrane damage was investigated. This study revealed that when tested at a 3.5% concentration (60 min) the underestimated chemicals induced an increased protein and/or enzyme release. A two-step classification prediction model was developed that classified the chemicals first by the amount of mucus produced (1%, 60 min). Chemicals that did not affect this endpoint were classified based on the membrane damage induced by a second treatment (3.5%, 60 min). The results were compared with the corresponding EU classification (NI, R36 and R41) and 71% of the chemicals were correctly classified with a specificity and sensitivity of 75% and 94%, respectively. Repeated testing of the chemicals revealed a good intra-laboratory reproducibility. The test seems to be a promising method for screening the eye irritating potential of chemicals.