Contaminants In Sludge Research Articles

Analysis of Organic and Inorganic Contaminants in Dried Sewage Sludge and By-Products of Dried Sewage Sludge Gasification

Organic and inorganic contaminants in sewage sludge may cause their presence also in the by-products formed during gasification processes. Thus, this paper presents multidirectional chemical instrumental activation analyses of dried sewage sludge as well as both solid (ash, char coal) and liquid (tar) by-products formed during sewage gasification in a fixed bed reactor which was carried out to assess the extent of that phenomenon. Significant differences were observed in the type of contaminants present in the solid and liquid by-products from the dried sewage sludge gasification. Except for heavy metals, the characteristics of the contaminants in the by-products, irrespective of their form (solid and liquid), were different from those initially determined in the sewage sludge. It has been found that gasification promotes the migration of certain valuable inorganic compounds from sewage sludge into solid by-products which might be recovered. On the other hand, the liquid by-products resulting from sewage sludge gasification require a separate process for their treatment or disposal due to their considerable loading with toxic and hazardous organic compounds (phenols and their derivatives).

Bacterial succession and degradative changes by biofilm on plastic medium for wastewater treatment

Biofilms contain a diverse range of microorganisms and their varying extracellular polysaccharides. The present study has revealed biofilm succession associated with degradative effects on plastic (polypropylene) and contaminants in sludge. The wet weight of biofilm significantly (p < 0.05) increased; from 0.23 ± 0.01 to 0.44 ± 0.01 g. Similarly, the dry weight of the biofilm increased from 0.02 to 0.05 g. Significant reduction in pathogens (E. coli and feacal coliforms) by MPN technique (>80%) and in chemical parameters (decrease in COD, BOD5 of 73.32 and 69.94%) representing diminution of organic pollutants. Energy dispersive X-ray spectroscopy (EDS) of plastic revealed carbon and oxygen contents, further surface analysis of plastic by scanning electron microscopy (SEM) revealed emergence of profound bacterial growth on the surface. Fourier transform infrared (FTIR) spectroscopy conforms its biotransformation under aerobic conditions after 8 weeks. New peaks developed at the region 1050 and 969 cm(-1) indicating CO and CC bond formation. Thus plastic with 6 weeks old aerobic biofilm (free of pathogens, max. weight, and OD, efficient COD & BOD removal ability) is suggested to be maintained in fixed biofilm reactors for wastewater treatment.

Effects of Picoxystrobin and 4-n-Nonylphenol on Soil Microbial Community Structure and Respiration Activity

There is widespread use of chemical amendments to meet the demands for increased productivity in agriculture. Potentially toxic compounds, single or in mixtures, are added to the soil medium on a regular basis, while the ecotoxicological risk assessment procedures mainly follow a chemical by chemical approach. Picoxystrobin is a fungicide that has caused concern due to studies showing potentially detrimental effects to soil fauna (earthworms), while negative effects on soil microbial activities (nitrification, respiration) are shown to be transient. Potential mixture situations with nonylphenol, a chemical frequently occurring as a contaminant in sewage sludge used for land application, infer a need to explore whether these chemicals in mixture could alter the potential effects of picoxystrobin on the soil microflora. The main objective of this study was to assess the effects of picoxystrobin and nonylphenol, as single chemicals and mixtures, on soil microbial community structure and respiration activity in an agricultural sandy loam. Effects of the chemicals were assessed through measurements of soil microbial respiration activity and soil bacterial and fungal community structure fingerprints, together with a degradation study of the chemicals, through a 70 d incubation period. Picoxystrobin caused a decrease in the respiration activity, while 4-n-nonylphenol caused an increase in respiration activity concurring with a rapid degradation of the substance. Community structure fingerprints were also affected, but these results could not be directly interpreted in terms of positive or negative effects, and were indicated to be transient. Treatment with the chemicals in mixture caused less evident changes and indicated antagonistic effects between the chemicals in soil. In conclusion, the results imply that the application of the fungicide picoxystrobin and nonylphenol from sewage sludge application to agricultural soil in environmentally relevant concentrations, as single chemicals or in mixture, will not cause irreversible effects on soil microbial respiration and community structure.

Biotests for environmental quality assessment of composted sewage sludge

The quality of sewage sludge-based products, such as composts and growth media, is affected by the contamination of sewage sludge with, potentially, hundreds of different substances. Therefore, it is difficult to achieve the reliable environmental quality assessment of sewage sludge-based products solely based on chemical analysis. In the present work, we demonstrate the use of the kinetic luminescent bacteria test (ISO 21338) to evaluate acute toxicity and the Vitotox™ test to monitor genotoxicity of sewage sludge and composted sewages sludge. In addition, endocrine-disrupting and dioxin-like activity was studied using yeast-cell-based assays. The relative contribution of industrial waste water treated at the Waste Water Treatment Plants led to elevated concentrations of polyaromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and polychlorinated dibenzo-p-dioxins and -furans (PCDD/F) in sewage sludge. The effect of elevated amounts of organic contaminants could also be identified with biotests able to demonstrate higher acute toxicity, genotoxicity, and potential for endocrine-disruptive properties. Additional extraction steps in kinetic luminescent bacteria test with DMSO and hexane increased the level of toxicity detected. Composting in a pilot-scale efficiently reduced the amounts of linear alkylbenzensulphonates (LASs), nonylphenols and nonylphenolethoxylates (NPE/NPs) and PAH with relative removal efficiencies of 84%, 61% and 56%. In addition, decrease in acute toxicity, genotoxicity and endocrorine-disrupting and dioxin-like activity during composting could be detected. However, the biotests did have limitations in accessing the ecotoxicity of test media rich with organic matter, such as sewage sludge and compost, and effects of sample characteristics on biotest organisms must be acknowledged. The compost matrix itself, however, which contained a high amount of nutrients, bark, and peat, reduced the sensitivity of the genotoxicity tests and yeast bioreporter assays.

Comprehensive mass flow analysis of Swedish sludge contaminants

A screening of metals, persistent organic pollutants, pharmaceuticals and personal care products (PPCPs), and other organic contaminants in sludge from seven Swedish sewage treatment plants (STPs) was performed in this study. This extensive screening provides information on mass flows of 282 compounds used in the Swedish society to sewage sludge. It reveals constant relative contaminant concentrations (ngmgkg−1d.w.), except for some pesticides and perfluorinated compounds, indicating that these originate from broad usage and diffuse dispersion rather than (industrial) point sources. There was a five order of magnitude difference in the sum concentrations of the most and least abundant species (metals and polychlorinated dibenzo-p-dioxins and -furans, respectively). Lower total concentrations were found in sludge from STPs processing primarily food industry or household sewage. Proportions of the amounts used (in Sweden) found in sludge were lower for compounds that are present in consumer goods or are diffusely dispersed into the environment (0.01-1% recovered in sludge) than for compounds used as detergents or PPCPs (17–63%). In some cases, the recovery seemed to be affected by evaporation (e.g. octamethylcyclotetrasiloxane) or biotransformation (e.g. adipates) losses, while polychlorinated alkanes and brominated diphenyl ethers were recovered to disproportionately high degree (ca. 4%); likely due to incomplete statistics for imported goods.

Uptake of Galaxolide, Tonalide, and Triclosan by Carrot, Barley, and Meadow Fescue Plants

Many xenobiotics entering wastewater treatment plants are known to be persistent during wastewater treatment and tend to adsorb to sewage sludge. The application of sewage sludge as fertilizer in agriculture may pose the risk of an incorporation of xenobiotics in the cultivated plants and, finally, an inclusion into the food chain. This study was performed to investigate the uptake of common sewage sludge contaminants, galaxolide, tonalide, and triclosan, by plants used for human consumption and livestock feeding. Barley, meadow fescue, and four carrot cultivars were sown and grown in spiked soils under greenhouse conditions. After harvesting the plants, roots and leaves were analyzed separately, and the respective bioconcentration factors were calculated. In carrots, a concentration gradient of the xenobiotics became evident that decreased from the root peel via root core to the leaves. A significant influence of the differing root lipid contents on the uptake rates cannot be supported by our data, but the crucial influence of soil organic carbon content was confirmed. Barley and meadow fescue roots incorporated higher amounts of the target substances than carrots, but translocation into the leaves was negligible. The results indicated that an introduction of persistent semi- and nonpolar xenobiotics into the food chain via edible plants like carrots could be of certain relevance when sludge is applied as fertilizer. Due to low rates found for the translocation of the xenobiotics into the aerial plant parts, the entrance pathway into food products via feeding livestock is less probable.

Development and enhancement of electro-osmotic flow for the removal of contaminants from soils

Electrokinetic remediation is a developing remediation technology for the restoration of soils, sludge and sediments contaminated with inorganic and/or organic compounds. The basis of electrokinetic remediation lays in the application of a low intensity direct electric current (typically 1VDCcm−1) to the contaminated porous matrix (soil, sediment). The electric field induces the mobilization and transport of the contaminants toward the electrodes. Ionic contaminants are transported toward the electrode of the opposite charge due to the transport process known as electromigration. The electric field also induces a net flux of water into the solid porous matrix, known as electro-osmosis. Electro-osmosis transport contaminants in solution in the interstitial fluid toward the cathode if the surface charge of the porous matrix is negative, which is the most common case. Thus, electro-osmosis is the key transport phenomenon for the removal of organic contaminants in soils, sludge and sediments. The most dangerous and recalcitrant organics in soils are hydrophobic and tend to remain attached to the soil particles and organic matter in the soil. In order to enhance the removal of organic contaminants by electro-osmosis, it is necessary to use solubilizing agents that desorb the contaminants and favor their dissolution/solubilization in the interstitial fluid. Surfactants, bio-surfactants, co-solvents, and cyclodextrins were used with different success in the removal of these hydrophobic organics in soils. However, the effectiveness of the process also depends on the maintenance of a high electro-osmotic flow for a long time. This can be achieved by regulating the pH of the soil with the proper flushing solution in the electrodes and using pulsed electric fields.

Removal of pharmaceuticals, polybrominated flame retardants and UV-filters from sludge by the fungus Trametes versicolor in bioslurry reactor

Conventional wastewater treatments are inefficient in the removal of many organic pollutants. The presence of these contaminants in the final sludge represents a source of environmental pollution due to the increasing use of biosolids in land application. A biotechnological approach which employed the fungus Trametes versicolor in a sludge-bioslurry reactor was assessed in order to remove several groups of emerging pollutants. Biological fungal activity was monitored by means of ergosterol and laccase determinations. Fifteen out of 24 detected pharmaceuticals were removed at efficiencies over 50% after the treatment, including eight completely degraded. Removal ranged between 16–53% and 22–100% for the brominated flame retardants and the UV-filters, respectively. Only two of all the detected compounds remained unchanged after the treatment. Although elimination results are promising, the toxicity of the final sludge increased after the treatment. This finding is contrary to the toxicity results obtained in similar treatments of sludge with T. versicolor in solid-phase.

A Collaborative Effort to Address the Distribution of Plutonium-Contaminated Sludge in Livermore, California

Plutonium releases from the U.S. nuclear weapons laboratory in Livermore, California resulted in the contamination of sewage sludge. Two research models to address the potential public health impacts of plutonium-contaminated sludge distribution were undertaken. One model was a collaborative approach that emphasized incorporating local knowledge into the scientific analysis and fostering the growth of mutually respectful relationships between scientists, governmental, and non-governmental collaborators. The second was a dose-assessment approach that utilized existing data to estimate radiological doses from exposure to plutonium contaminated sewage sludge and compared the estimated doses with those that have caused sickness or death. The two models reached different conclusions; neither addressed issues of intergenerational equity and primary prevention of exposure. Advancing an ethical research agenda will involve looking upstream of the contamination and working toward sustainable solutions to security that do not involve the public health threats embedded in the global embrace of nuclear weapons.

Time-trends of metals and organic contaminants in sewage sludge

The occurrence of chemicals in sludge from sewage treatment plants (STPs) is of concern for human health and the environment. Legislations and regulations are put in place to minimize the release of harmful chemicals into the environment and arable land, e.g. via application of sewage sludge. Temporal trends analysis of sludge contaminants can be used to assess the effectiveness of such actions. Such analyses can be performed retrospectively, using sludge stored in environmental specimen banks, to investigate new or emerging environmental contaminants. The present study provides data from time-trend analyses of metals, persistent organic pollutants, pharmaceuticals, personal care products, and other organic compounds in sludge from Swedish. The analysis showed that sludge is a suitable matrix for time-trend studies and it can take on average 12 years (range, 5–26 years) to track an annual change of ±10% (with a power of 80%). Statistically significant trends were found for 18 out of the 77 compounds subjected to analysis, of which 75% showed decreasing trends. Triclosan and the antibiotic norfloxacin followed the same trend as the national recorded usage and decreased annually by 65% and 60%, respectively. The opposite was true for the methylsiloxanes, which showed an annual average increase of about 30%. A downward trend (about 20% year−1) was observed for the polybrominated diphenylethers (PBDEs 154 and 183), while PBDE 209 increased by 16%. Further measurements are required to determine if the substitution of PBDEs by chlorinated paraffins or organophosphorus compounds have resulted in increased concentrations of the latter in sludge.

Innovative Technologies for Sustainable Environmental Remediation in Poor and Middle Income Countries

Innovative Technologies for Sustainable Environmental Remediation in Poor and Middle Income Countries

Short- and long-chain perfluorinated acids in sewage sludge from Shanghai, China

Perfluorinated acids (PFAs) are the subject of increasingly intense environmental research. In this study, sewage sludge samples were collected from 25 wastewater treatment plants (WWTPs) in Shanghai, China to evaluate the levels and profile of C3–C14 PFAs. The results showed a ubiquitous PFAs contamination of sewage sludge in Shanghai with the total PFAs (∑PFAs) range of 126–809ngg−1dw. Perfluorooctanoic acid (PFOA) was found to be the dominant PFA pollutant and its concentration ranged from 23.2 to 298ngg−1dw, much higher than the levels in other countries. Moreover, concentrations of short-chain PFAs (<C6) in sewage sludge were considerable. Following sludge application in agricultural land, the concentrations of PFOA, and perfluorooctane sulfonate (PFOS) are predicted to be 1.08 and 7.53ngg−1dw, respectively, much lower than the corresponding US EPA standards. Nevertheless, further studies are needed to explore the fate of PFAs in sludge-amended soils due to the persistence and bioaccumulation potential of these compounds.

Levels and distribution patterns of short chain chlorinated paraffins in sewage sludge of wastewater treatment plants in China

Short chain chlorinated paraffins (SCCPs) are listed as persistent organic pollutant candidates in the Stockholm Convention and are receiving more and more attentions worldwide. In general, concentrations of contaminants in sewage sludge can give an important indication on their pollution levels at a local/regional basis. In this study, SCCPs were investigated in sewage sludge samples collected from 52 wastewater treatment plants in China. Concentrations of total SCCPs (ΣSCCPs) in sludge were in the range of 0.80–52.7 μg/g dry weight (dw), with a mean value of 10.7 μg/g dw. Most of SCCPs in the sludge samples showed a similar congener distribution patterns, and C 11 and Cl 7,8 were identified as the dominant carbon and chlorine congener groups. Significant linear relationships were found among different SCCP congener groups ( r 2 ≥ 0.9). High concentrations of SCCPs in sewage sludge imply that SCCPs are widely present in China.

Polybrominated diphenyl ethers in sewage sludge from Shanghai, China: Possible ecological risk applied to agricultural land

Ideally, agricultural use is a treatment for the sewage sludge generated from municipal wastewater. However, this treatment probably causes ecological risks due to the occurrence of organic contaminants in sludge, which has attracted rising concerns recently. To assess the possible ecological risk, in this study, sewage sludge samples were collected from 28 wastewater treatment plants (WWTPs) in Shanghai, China for exploring the level and profile of polybrominated diphenyl ethers (PBDEs). The mean concentration of Σ18PBDE (sum of all target analytes except for BDE-209) was at the low end of global range. However, we found the highest reported BDE-209 levels (34,900ngg−1dw) in sewage sludge/biosoilds to date. The annual mass loadings of penta-BDE, octa-BDE, and deca-BDE were 3.6, 0.6, and 763kg through sludge, respectively. Following sludge application in agricultural land, the concentrations of penta-BDE, octa-BDE, and deca-BDE in soil were 0.19, 0.03, and 39.5ngg−1, respectively. Preliminary results indicate that the ecological risk of soil in organisms exposed to PBDEs was relatively low. Nevertheless, further studies are needed to explore the fate of PBDEs in sewage sludge due to no restriction on the usage and production of PBDEs products in China currently.

Evaluation of perfluorinated compounds in seven wastewater treatment plants in Beijing urban areas

The presence of perfluorinated compounds (PFCs) in seven major wastewater treatment plants (WWTPs) in Beijing was investigated in the current study. We detected nine PFCs in all the wastewater and sludge samples. Perfluorooctane acid (PFOA) is the dominant PFCs in influents and effluents, while perfluorooctane sulfonate (PFOS) is the major contaminant in sludge. The highest PFC concentration was found in plants at Qinghe and Jiuxianqiao WWTP, while the lowest was found at Fangzhuang WWTP. The total values of PFC range from 2.88 to 176 ng/L in influents, from 5.48 to 498 ng/L in effluents, and from 1.21 to 32.0 ng/g (dry wt) in sludge. The fact that effluents usually contain higher levels of PFCs than influents suggests that additional PFCs are produced during the wastewater treatment processes. However, PFOS decreases in effluents than in influents in 62% of the water samples. This may be due to the adsorption and removal of the sludge during the active process. Perfluoroalkyl carboxylates (PFCAs) were found significantly correlated with each other in the effluents, which may indicate their similar sources or the existence of their potential precursors in the wastewater or treatment processes. The mass flows of PFC discharges into WWTPs are 0.4–51.4 mg/day, and the mass flows of PFCs in effluents exceed those in influents by 127%. Domestic and commercial wastewaters are suggested to be the major sources of PFC pollution in WWTPs in Beijing.

Distribution of 16 EPA-priority polycyclic aromatic hydrocarbons (PAHs) in sludges collected from nine Tunisian wastewater treatment plants

Polycyclic aromatic hydrocarbons (PAHs) are organic compounds which may be present as contaminants in wastewater sewage sludge. Due to their toxicity and persistence in the solid phase, information should be gathered relating to their presence in sewage sludge in order to determine their contamination risks after land application. In this study, sewage sludge samples from nine Tunisian wastewater treatment plants (WWTPs) were characterized for the total content in 16 EPA-priority PAHs using an optimized extraction protocol. These WWTPs differ in the type of applied treatment and the wastewater source. Through this first assessment of PAHs in Tunisian sludges, their total concentration varied from 96 to the highest level of 7718 ng g −1. Regardless of the source of wastewater, the highest PAH content was found in sludges deriving from untreated wastewater (natural lagooning). In addition, some correlation was found between the distribution patterns of each PAH, the type of applied treatment on one hand and the wastewater source on other hand.

Radioactivity in Oily Sludge and Produced Waste Water from Oil: Environmental Concerns and Potential Remedial Measures

Produced water separated from oil is usually returned to the environment and could permeate through the water table. If such water is contaminated with radioactive substances, it could create a definite threat to the water supply, especially in arid regions where ground water and overhead streams are sources of potable water. Low-level radioactive contamination of oily sludge is equally hazardous and also leads to detrimental pollution of water resources. We investigated the distribution of 226Ra, 40K and 228Ac in produced waste water and oily sludge and found abnormal levels of radioactivity. A total of 90 ground wastewater samples were collected from different sites for a period of one year. The presence of these radionuclides was identified by their characteristic gamma rays. The detection system consisted of a high-purity germanium detector. Our results show that about 20% of the samples exhibited 20–60 Bq/L radioactivity and ~6% of the samples exceeded 60 Bq/L. Roughly 70% of the experimental samples fell in the range of 2–20 Bq/L, which still exceeded the maximum admissible drinking-water limit 0.2 Bq/L.

Immobilization of Petroleum Sludge Incorporating Portland Cement and Rice Husk Ash

Portland cement and rice husk ash were incorporated to stabilize and solidify the contaminant in petroleum sludge. Stabilization and solidification technique was chosen as an alternative treatment to reduce toxicity of the sludge prior to final disposal of the waste. The sludge has significant amount of organic material which normally interfere with the cement hydration process. A way to improve is by incorporation of cement replacement material. Mixture proportioning was conducted to find optimum water to cement ratio, sludge to cement ratio and cement replacement percentage. The solidified sludge performance was measured by compressive strength and permeable porosity. The optimum ratio of water to cement was found at 0.45 and cement to sludge of 8. Rice husk ash (RHA) was added at 5, 10 and 15 % cement replacement. 5 % RHA exhibited the best performance with regards to unconfined compressive of 24.9 N/mm 2 . The strength was better than the sludge cement of 19.2 N/mm 2 . Permeable porosity has inverse relationship with strength at water to cement ratio of 0.4. However at water to cement ratio of 0.45, the relationship showed different trend where increase in porosity cause increase in strength. Porosity was found to increase with increasing RHA content. The surface morphology of solidified cement with voids was found to be in the range of 10 to 15 μm for 15 % RHA.

ESBL-producing E. coli in Austrian sewage sludge

The aim of this study was to investigate the degree of contamination of sewage sludge with ESBL-producing Escherichia coli strains and the effectiveness of different sewage sludge treatment methods. Monthly sewage sludge samples were collected between January and September 2009 in 5 different sewage treatment plants and tested for the presence of ESBL E. coli. In addition, the number of colony forming units (CFU) of E. coli and coliform bacteria before and after the different sludge treatment methods (aerobic/anaerobic digestion, lime stabilization, and thermal treatment) was investigated. Of the 72 sewage sludge samples investigated, ESBL-positive E. coli were found in 44 (61.1%) sewage sludge samples. The classification of β-lactamase groups was carried out in 15 strains resulting in the detection of 2 different groups (CTX-M and TEM) of bla genes. All 15 of them had a CTX-M gene and 4 of these strains furthermore carried a TEM gene. With regard to the CFU of E. coli and coliform bacteria, thermal treatment and lime stabilization following dehydration sufficiently reduced pathogen concentrations. The plants using merely stabilization and dehydration showed an increase of E. coli and coliform bacteria and thus also an increase in ESBL-producing E. coli.

Phosphodiesterase type V inhibitors: Occurrence and fate in wastewater and sewage sludge

The contamination of wastewater and sewage sludge has been examined for three phosphodiesterase type V inhibitors sildenafil, vardenafil and tadalafil, active agents of Viagra ®, Levitra ® and Cialis ®, respectively. Sensitive quantification methods based on solid-phase extraction (SPE) and pressurized liquid extraction (PLE) followed by high performance liquid chromatography – tandem mass spectrometry (HPLC–MS/MS) have been developed to analyse these compounds in wastewater and sewage sludge. Effluent water of nine sewage treatment plants (STPs) has been analysed to assess the impact of the phosphodiesterase type V inhibitors on the environment. One municipal STP (Tarragona, Spain) has been thoroughly studied over the year 2008 (i) with respect to the distribution of these compounds among influent and sewage sludge and (ii) the elimination efficiency. The developed methods allowed quantification at trace concentrations. Sildenafil was present in all investigated samples at the low ng/L and ng/g range, respectively. Tadalafil was not detected or below the limit of detection (LOQ) in effluent water taken in Spain but in sewage sludge (12 ng/g – < LOQ). Vardenafil was present only in one sludge sample and between 5 ng/g and < LOQ in effluent water. The overall removal efficiency of the STP in Tarragona (Spain) is 68%, 69% and 80% for sildenafil, tadalafil and vardenafil, respectively. This study shows for the first time the determination of these compounds in wastewater and sewage sludge.