Slow Conversion Research Articles

Tungsten phosphide on nitrogen and phosphorus-doped carbon as a functional membrane coating enabling robust lithium-sulfur batteries

Lithium-sulfur batteries (LSBs) hold great potential as future energy storage technology, but their widespread application is hampered by the slow polysulfide conversion kinetics and the sulfur loss during cycling. In this study, we detail a one-step approach to growing tungsten phosphide (WP) nanoparticles on the surface of nitrogen and phosphorus co-doped carbon nanosheets (WP@NPC). We further demonstrate that this material provides outstanding performance as a multifunctional separator in LSBs, enabling higher sulfur utilization and exceptional rate performance. These excellent properties are associated with the abundance of lithium polysulfide (LiPS) adsorption and catalytic conversion sites and rapid ion transport capabilities. Experimental data and density functional theory calculations demonstrate tungsten to have a sulfophilic character while nitrogen and phosphorus provide lithiophilic sites that prevent the loss of LiPSs. Furthermore, WP regulates the LiPS catalytic conversion, accelerating the Li-S redox kinetics. As a result, LSBs containing a polypropylene separator coated with a WP@NPC layer show capacities close to 1500 mAh/g at 0.1C and coulombic efficiencies above 99.5 % at 3C. Batteries with high sulfur loading, 4.9 mg cm−2, are further produced to validate their superior cycling stability. Overall, this work demonstrates the use of multifunctional separators as an effective strategy to promote LSB performance.

Synthesis, characterization and stability of phosphonium phenolate zwitterions derived from a (diphenylphosphino)phenol derivative and oxiranes

Phosphonium phenolate zwitterions have been synthesized from 2,4-di-tert-butyl-6-(diphenylphosphino)phenol and five different oxirane derivatives. The reaction does not proceed at a detectable rate when the two reactants are combined in dichloromethane at room temperature. Despite the substantial ring strain, the reaction proceeds only with the addition of methanol, which acts as a hydrogen transfer shuttle, allowing a slow conversion to the desired zwitterions. The compounds have been fully characterized and single crystal X-ray crystallography has been performed on the methyloxirane and the phenyl glycidyl ether-derived zwitterion. The phosphonium phenolate units exhibit an ylidic bonding situation as evidenced by spectroscopic and crystallographic analysis. Glycidyl ethers were found to react faster than alkyl and aryloxiranes. Decomposition studies of the zwitterions showed high thermal stability in solution under ambient conditions. Under forced conditions (150 °C, 6 h), decomposition to the corresponding phosphine oxide and secondary aliphatic alcohols, the formally hydrogenated oxirane derivative, was observed.Graphical abstract

Multi-heterostructured MXene/NiS2/Co3S4 with S-Vacancies to Promote Polysulfide Conversion in Lithium-Sulfur Batteries.

The severe shuttle effect of polysulfides (LiPSs) and the slow liquid-solid phase conversion are the main obstacles hindering the practical application of lithium-sulfur (Li-S) batteries. Separator modification with a high-activity catalyst can boost LiPSs conversion and suppress their shuttle effect. In this work, multi-heterostructured MXene/NiS2/Co3S4 with rich S-vacancies was constructed facilely with a hydrothermal and high-temperature annealing strategy for separator modification. The MXene sheet not only provides a physical barrier but also ensures a high conductivity and adsorption capacity of the catalyst; the dual active centers of NiS2 and Co3S4 catalyze LiPSs conversion. In addition, the vacancies and heterostructures can modulate the electronic structure of the catalyst, improve its intrinsic activity, and reduce the polysulfides reaction barrier, thus facilitating ion/electron transport and inhibiting the shuttle effect. Benefiting from these advantages, the Li-S battery with MXene/NiS2/Co3S4 modified separator exhibits exciting discharge capacities (1495.4 mAh g-1 at 0.1C and 549.0 mAh g-1 at 6C) and an excellent ultra-long cycle life (average capacity decay rate of 0.026% for 2000 cycles at 2C); at a high sulfur loading of 10.0 mg cm-2, the battery operates for nearly 80 cycles at 0.2C, giving a capacity retention rate of 75.76%. This work provides a high-activity catalyst for Li-S batteries.

Spontaneous built-in electric field in heterostructure electrocatalysts with high catalytic activity and conductivity: Inducing 3D nucleation of Li2S

Lithium-sulfur (Li-S) batteries have become a research focus due to their high theoretical specific capacity and energy density. The shuttle effect and slow sulfur conversion kinetics of lithium polysulfides (LiPSs) severely hindered their practical application. Here, a N-doped carbon nanofiber self-supporting electrode modified with cobalt selenide/nickel selenide as a sulfur carrier (CoSe2/NiSe2@NCNFs) is designed and constructed. The experimental results show that a built-in electric field is formed at the interface of CoSe2/NiSe2 Mott-Schottky heterostructure, which promotes the conversion of LiPSs and induces 3D nucleation of Li2S. Furthermore, the calculation results of density functional theory clearly reveal high conductivity, adsorption and interfacial charge transfer between CoSe2/NiSe2 Mott-Schottky heterostructure electrocatalyst and LiPSs. As a result, the CoSe2/NiSe2@NCNFs/S cathode shows a specific capacity of 1050.8 mAh g−1 at 1 C, and maintains excellent cycling performance with a discharge capacity of 735.1 mAh g−1 and a capacity decay of 0.003 % per cycle over 1000 cycles. This work designed a Mott-Schottky heterostructure electrocatalyst to strengthen the adsorption and conversion of LiPSs and induce 3D nucleation of Li2S, providing a new idea for high-performance Li-S batteries.

ZIF-67-Derived Flexible Sulfur Cathode with Improved Redox Kinetics for High-Performance Li-S Batteries.

Lithium-sulfur (Li-S) batteries have received much attention due to their high energy density and low price. In recent years, alleviating the volume expansion and suppressing the shuttle effect during the charge and discharge processes of Li-S batteries have been widely addressed. However, the slow conversion kinetics from polysulfide (LiPSs) to Li2S2/Li2S still limits the application of Li-S batteries. Therefore, we designed a ZIF-67 grown on cellulose (named ZIF-67@CL) as an electrocatalyst to improve the interconversion kinetics from LiPSs to Li2S2/Li2S for Li-S batteries. Based on the results of adsorption experiments of LiPSs, ZIF-67@CL and CL hosts were immersed in Li2S4 solution to adsorb LiPSs, and the UV-Vis test was conducted on the supernatant after adsorption. The results showed that the ZIF-67@CL had a stronger adsorption for LiPSs compared with the cellulose (CL). Furthermore, in the Li2S nucleation tests, the fabricated cells were galvanostatically discharged to 2.06 V at 0.112 mA and then potentiostatically discharged at 2.05 V. Based on the results of Li2S nucleation tests, the catalytic effect of ZIF-67 was further verified. As a result, the sulfur cathode used a ZIF-67 catalyst (named S/ZIF-67@CL) and delivered an initial capacity of 1346 mAh g-1 at a current density of 0.2 C. Even at a high current density of 2 C, it exhibited a high-capacity performance of 1087 mAh g-1 on the first cycle and maintained a capacity output of 462 mAh g-1 after 150 cycles, with a Coulombic efficiency of over 99.82%.

Mxene quantum dots decorated reduced graphene oxide networks as multifunctional electrocatalyst for advanced lithium–sulfur batteries

Lithium sulfur (Li-S) battery has shown great potential as an attractive rechargeable energy storage devices, but the shuttle behavior and slow conversion kinetics of the intermediate lithium polysulfides (LiPSs) are the main obstacles to the practical application of Li-S battery. Herein, a simple and scalable spray drying strategy was used to construct conductive polar Ti3C2 MXene quantum dots (QDs)-decorated reduced graphene oxide (rGO) microsphere (rGO@Ti3C2 QDs) as efficient electrocatalyst and absorbent for Li-S battery. Firstly, the DFT results show that Ti3C2 QDs can effectively adsorb and catalyze LiPSs conversion. This ability can be attributed to the Ti3C2 QDs can provide a large number of LiPSs catalytic active sites. In addition, the rGO provides physical LiPSs constraint and a flexible substrate to prevent QDs from aggregating. Moreover, both parts are conductive, effectively improving the electron/charge transfer. Therefore, this unique structure and composition show high LiPSs adsorption and catalysis, while allowing rapid Li+/electron transfer. As a result, the S/rGO@Ti3C2 QDs electrode provides high initial capacity (1185 mAh/g at 0.2C), good rate capability (758 mAh/g at 3C), and excellent long-term cyclability (500 cycles at 1C with low attenuation of 0.07% per cycle), as well as an excellent electrochemical performance even at high sulfur loading. Meanwhile, the Li-S pouch cell based on S/rGO@Ti3C2 QDs also achieved a high initial energy density of 230.9 Wh kg−1. This work may provide a promising strategy to obtain better electrochemical performance by introducing quantum dots into Li-S cathodes.

Engineering Spin State in Spinel Co3O4 nanosheets by V‐Doping for Bidirectional Catalysis of Polysulfides in Lithium–Sulfur Batteries

AbstractThe slow bidirectional conversion and fast shuttling of lithium polysulfides (LiPSs) remain the main obstacles that inhibit the practical application of lithium sulfur batteries (LSBs). Here, by engineering the in‐spin state of spinel oxides, V doping‐induced hexagonal nanosheets (V‐Co3O4 NS) with intermediate spin state (IS, t2g5 eg1) can form stable bond order toward LiS* based on the ligand field theory and molecular orbital theory, thus effectively accelerating the sulfur conversion kinetics. Owing to these merits, the V‐Co3O4 NS modified separator base battery achieves a high areal capacity of 15.37 mAh cm−2 with sulfur loading of 15.4 mg cm−2, and it displays a low‐capacity attenuation of 0.015% each cycle at 3.0 C for 1900 cycles.

Development of Synergistically Efficient Ni–Co Pair Catalytic Sites for Enhanced Polysulfide Conversion in Lithium–Sulfur Batteries

AbstractThe performance of Lithium–sulfur (Li–S) batteries is constrained by the migration of lithium polysulfide (LiPS), the slow conversion of LiPS, and the significant reaction barrier encountered during the precipitation/dissolution of Li2S throughout the discharge/charge cycle. In this contribution, the study presents Ni–Co dual‐atom catalytic sites on hollow nitrogen‐doped carbon (NiCoNC). Theoretical calculations and experimental data reveal that the dual‐atom catalysts (DACs) accelerate the kinetic conversion of LiPSs and facilitate the formation/decomposition of Li2S during discharging and charging, which minimizes LiPS migration. Consequently, the utilization of S/NiCoNC cathodes manifests a substantial initial capacity of 1348.5 mAh g−1 at 0.1 C, exceptional cycling stability with an average capacity degradation rate of 0.028% per cycle over 900 cycles at 0.5 C, and noteworthy rate capability with a capacity of 626 mAh g−1 at 2 C. Electrodes with a higher sulfur loading of 4.5 mg cm−2 and a low electrolyte/sulfur ratio of 8 µL mg−1 exhibit exceptional specific capacities of up to 1236 mAh g−1 at 0.1 C, as well as noteworthy capacity retention of 494.2 mAh g−1 after 200 cycles at 0.2 C. This study effectively showcases the potential of DACs as catalysts for sulfur cathodes, thereby enhancing the overall performance of Li–S batteries.

CuS assisted Fe(III)-induced peracetic acid activation for bisphenol A degradation: significance of synergetic roles of copper and sulfur in enhanced Fenton-like process

Peracetic acid (PAA), as a promising synthetic organic acid disinfectant, is widely used in advanced oxidation processes to produce radicals for micropollutant abatement. While PAA activation driven by common Fenton-like processes suffers from the slow iron cyclic conversion and production of ferric sludge. This study introduces a metal sulfide, i.e., CuS, to assist the Fe(III)-induced PAA activation via multiple pathways, including the direct PAA activation and Fe(II)/Fe(III) cyclic conversion acceleration, termed as the CuS/Fe(III)/PAA process, to produce •OH, O2•−, Fe(IV), CH3C(O)O•, and CH3C(O)OO•, capable of degrading bisphenol A (BPA), one of representative endocrine disruptors in wastewater, thus overcoming the limitation of conventional Fenton-like processes. Cu(I), S22−, and S2− are determined to be catalytic sites of CuS responsible for the promotion of PAA activation. The CuS/Fe(III)/PAA process exhibits excellent degradation performances under acid conditions and performed high reactivities toward the degradation of various contaminants. The introduction of metal sulfide into the Fe(III)/PAA process improves the PAA activation and micropollutant degradation and reduces accumulation of iron sludge. Of particular significance is that water matrices performed limited effects on the BPA degradation, suggesting the potential of CuS/Fe(III)/PAA process to degrade micropollutants in real water treatment.

Regulating Electron Filling and Orbital Occupancy of Anti-Bonding States of Transition Metal Nitride Heterojunction for High Areal Capacity Lithium-Sulfur Full Batteries.

The commercialization of lithium-sulfur (Li-S) battery is seriously hindered by the shuttle behavior of lithium (Li) polysulfide, slow conversion kinetics, and Li dendrite growth. Herein, a novel hierarchical p-type iron nitride and n-type vanadium nitride (p-Fe2N/n-VN) heterostructure with optimal electronic structure, confined in vesicle-like N-doped nanofibers (p-Fe2N/n-VN⊂PNCF), is meticulously constructed to work as "one stone two birds" dual-functional hosts for both the sulfur cathode and Li anode. As demonstrated, the d-band center of high-spin Fe atom captures more electrons from V atom to realize more π* and moderate σ* bond electron filling and orbital occupation; thus, allowing moderate adsorption intensity for polysulfides and more effective d-p orbital hybridization to improve reaction kinetics. Meanwhile, this unique structure can dynamically balance the deposition and transport of Li on the anode; thereby, more effectively inhibiting Li dendrite growth and promoting the formation of a uniform solid electrolyte interface. The as-assembled Li-S full batteries exhibit the conspicuous capacities and ultralong cycling lifespan over 2000 cycles at 5.0 C. Even at a higher S loading (20mg cm-2) and lean electrolyte (2.5µL mg-1), the full cells can still achieve an ultrahigh areal capacity of 16.1 mAh cm-2 after 500 cycles at 0.1 C.

Progresses and Prospects of Asymmetrically Coordinated Single Atom Catalysts for Lithium−Sulfur Batteries

Lithium–sulfur batteries (LSBs) are widely regarded as promising next‐generation batteries due to their high theoretical specific capacity and low material cost. However, the practical applications of LSBs are limited by the shuttle effect of lithium polysulfides (LiPSs), electronic insulation of charge and discharge products, and slow LiPSs conversion reaction kinetics. Accordingly, the introduction of catalysts into LSBs is one of the effective strategy to solve the issues of the sluggished LiPS conversion. Because of their nearly 100% atom utilization and high electrocatalytic activity, single‐atom catalysts (SACs) have been widely used as reaction mediators for LSBs' reactions. Excitingly, the SACs with asymmetric coordination structures have exhibited intriguing electronic structures and superior catalytic activities when compared to the traditional M–N4 active sites. In this review, we systematically describe the recent advancements in the installation of asymmetrically coordinated single‐atom structure as reactions catalysts in LSBs, including asymmetrically nitrogen coordinated SACs, heteroatom coordinated SACs, support effective asymmetrically coordinated SACs, and bimetallic coordinated SACs. Particularly noteworthy is the discussion of the catalytic conversion mechanism of LiPSs spanning asymmetrically coordinated SACs. Finally, a perspective on the future developments of asymmetrically coordinated SACs in LSB applications is provided.

Asymptotic analysis of conversion-limited phase separation

Liquid–liquid phase separation plays a major role in the formation and maintenance of various membrane-less subcellular structures in the cytoplasm and nucleus of cells. Biological condensates contain enhanced concentrations of proteins and RNA, many of which can be continually exchanged with the surrounding medium. Coarsening is an important step in the kinetics of phase separation, whereby an emulsion of polydisperse condensates transitions to a single condensate in thermodynamic equilibrium with a surrounding dilute phase. A key feature of biological phase separation is the co-existence of multiple condensates over significant time scales, which is consistent with experimental observations showing a slowing of coarsening rates. It has recently been proposed that one rate limiting step could be the slow interfacial conversion of a molecular constituent between the dilute and dense phases. In this paper, we analyse conversion-limited phase separation within the framework of diffusion in singularly perturbed domains, which exploits the fact that biological condensates tend to be much smaller than the size of a cell. Using matched asymptotic analysis, we solve the quasi-static diffusion equation for the concentration in the dilute phase, and then derive kinetic equations for the slow growth/shrinkage of the condensates. This provides a systematic way of obtaining corrections to mean-field theory that take into account the geometry of the cell and the locations of all the condensates.

Syntheses, Characterization, and Multifaceted Coordination Chemistry of Hydrazonido Titanium Complexes.

The reaction of hydrazones with bis(π-η5:σ-η1-pentafulvene)titanium complexes leads to both hydrazonido and hydrazido complexes depending on the interaction of the hydrazone with the fulvene ligand of the metal complex. The molecular structures mostly reveal κ2N,N side-on coordination of the hydrazonido ligand due to the deprotonation of the N-H bond by one of the fulvene moieties. Instead of deprotonation, the reaction of the bis(adamantylidene fulvene)titanium complexes with cinnamon aldehyde phenylhydrazone leads to κ1N coordination. By using donating groups in the backbone of the hydrazone ligands, there are exceptions to this coordination mode due to the insertion of the C═N double bond into the Ti-Cexo bond of the pentafulvene moiety. Using 2-pyridinecarboxaldehyde phenylhydrazone, a formal κ3N,N,N ligand system is formed by the coordination of the pyridine nitrogen atom to the metal center via consecutive N-H deprotonation and insertion. Finally, the use of salicylaldehyde phenylhydrazone ultimately produces a complex with the κ3N,N,O coordination mode by double deprotonation of the hydrazone N-H and O-H functions. Because of its slow conversion to the final product, the intermediate was isolated as an insertion product with consecutive O-H deprotonation, showing a κ2N,O coordination mode of the hydrazido ligand.

Metal-organic-framework derived NiS2/C hollow structures for enhanced polysulfide redox kinetics in lithium-sulfur batteries.

To cope with the shuttling of soluble lithium polysulfides in lithium-sulfur batteries, confinement tactics, such as trapping of sulfur within porous carbon structures, have been extensively studied. Although performance has improved a bit, the slow polysulfide conversion inducing fast capacity decay remains a big challenge. Herein, a NiS2/carbon (NiS2/C) composite with NiS2 nanoparticles embedded in a thin layer of carbon over the surface of micro-sized hollow structures has been prepared from Ni-metal-organic frameworks. These unique structures can physically entrap sulfur species and also influence their redox conversion kinetics. By improving the reaction kinetics of polysulfides, the NiS2/carbon@sulfur (NiS2/C@S) composite cathode with a suppressed shuttle effect shows a high columbic efficiency and decent rate performance. An initial capacity of 900 mAh g-1 at the rate of 1 C (1 C = 1675 mA g-1) and a low-capacity decline rate of 0.132% per cycle after 500 cycles are obtained, suggesting that this work provides a rational design of a sulfur cathode.

Two-dimensional phosphorus carbides (β-PC) as highly efficient metal-free electrocatalysts for lithium-sulfur batteries: a first-principles study.

Li-S batteries are considered as the next-generation batteries due to their exceptional theoretical capacity. However, their practical application is hampered by the shuttling effects of lithium polysulfides (LiPSs) and the sluggish Li2S decomposition, particularly the slow conversion from Li2S2 to Li2S. Addressing these challenges, the quest for effective catalysts that can accelerate the conversion of LiPSs and enhance the performance of Li-S batteries is crucial. In this study, we explored the electrocatalytic activity of two-dimensional phosphorus carbides (β0-PC and β1-PC) in Li-S batteries based on first-principles calculations. Our findings reveal that these materials demonstrate optimal binding strengths (ranging from 1.09 to 1.83 eV) with long-chain LiPSs, effectively preventing them from dissolving into the electrolyte. Additionally, they show remarkable catalytic activity during the sulfur redox reaction (SRR), with ΔG being only 0.37 eV for β0-PC and 0.13 eV for β1-PC. The low energy barrier induced by β-PC enhances ion migration barrier and significantly expedites the charge/discharge cycles of Li-S batteries. Furthermore, we investigated the conversion dynamics of Li2S2 to Li2S, employing the computational lithium electrode (CLE) model. The excellent performance in these aspects underscores the potential of these materials as electrocatalysts for Li-S batteries, paving the way for advanced high-efficiency energy storage solutions.

Minor Changes in Response Modules Leading to a "U-Shaped" Conversion Rate of Docetaxel Prodrug Nanoassemblies.

The prodrug-based nanoassemblies offer an alternative to settle the deficiencies of traditional chemotherapy drugs. In this nanosystem, prodrugs typically comprise drug modules, modification modules, and response modules. The response modules are crucial for facilitating the accurate conversion of prodrugs at specific sites. In this work, we opted for differentiated disulfide bonds as response modules to construct docetaxel (DTX) prodrug nanoassemblies. Interestingly, a subtle change in response modules leads to a "U-shaped" conversion rate of DTX-prodrug nanoassemblies. Prodrug nanoassemblies with the least carbon numbers between the disulfide bond and ester bond (PDONα) offered the fastest conversion rate, resulting in powerful treatment outcomes with some unavoidable toxic effects. PDONβ, with more carbon numbers, possessed a slow conversion rate and poor antitumor efficacy but good tolerance. With most carbon numbers in PDONγ, it demonstrated a moderate conversion rate and antitumor effect but induced a risk of lethality. Our study explored the function of response modules and highlighted their importance in prodrug development.

The introduction of metallic Cu onto mixed-phase TiO2 to realize in-situ capture, conversion, and reuse of lithium polysulfides for Li-S batteries

The Li-S batteries possessing high theoretical energy density are promising for next-generation energy storage. However, the shuttle effect and slow conversion of lithium polysulfides seriously hinder the practical application. In this contribution, introducing metallic Cu to modify dual-phase TiO2 (rutile/anatase) grown on N-doped carbon nanosheets (denoted as Cu/mTiO2-NC) can act as a buffer layer to confine the active S species in the cathode region effectively. The corresponding systematic experiments show that the Cu/mTiO2-NC provides sufficient surface affinity to adsorb and capture polysulfides and has a highly conductive C/N skeleton to achieve rapid electron migration. Moreover, the metallic Cu can react with polysulfides to further immobilize polysulfides. Thus, the Li-S batteries, with the aid of optimal Cu/mTiO2-NC, exhibit a desirable discharge capacity of 811 mA h g–1 after 100 cycles at 0.2 C, which is 50 % higher than that without Cu/mTiO2-NC. Moreover, the optimum Li-S batteries deliver a discharge capacity of 435.45 mA h g–1 after 600 cycles at 0.5 C, corresponding to attenuation per cycle of only 0.09 %.

Fe@Fe2O3/etched carbon felt as a cathode for efficient bisphenol a removal in a flow-through electro-Fenton system: Electron transfer pathway and underlying mechanism

The advanced oxidation processes based on the electro-Fenton reactions show great potentials as a wastewater treatment approach for removing emerging contaminants. In the electro-Fenton system, some factors still exist affecting the treatment efficiency, e.g., the formation of iron sludge, a narrow pH working range, and slow conversion rates between Fe2+ and Fe3+. In this research, a novel heterogeneous flow-through electro-Fenton system was constructed, and carbon felt was used as the template material for the preparation of an etched carbon felt cathode loaded with zero-valent iron and iron oxide (Fe@Fe2O3/ECF) for the degradation of bisphenol A, which addressed the aforementioned issues. The Fe@Fe2O3/ECF electrode showed excellent performance across a pH range between 3 and 11, with exceptional stability and resistance to other substances in water. For the three pollutants, bisphenol A, tetracycline and ciprofloxacin, the highest degradation efficiency can reach 99.3 %. Compared to traditional electro-Fenton systems, the novel process exhibited superior performances due to synergistic effects from feasible flow design, enhanced electrochemical reactivity and greater exposure of active sites. Through electron spin resonance and free-radical quenching experiments, it was determined that the primary species participating in the heterogeneous electro-Fenton process were the hydroxyl radical and superoxide anion. Specifically, the hydroxyl radical was identified as playing a pivotal role in the degradation of bisphenol A. After a continuous operation of 240 min, the electrode showed low metal ion leaching rate and good stability, with the concentrations of leached Fe and Co ions to be only 17 and 7 μg/L, respectively. Meanwhile, the removal efficiency was only decreased by 5.7 % during the process. Through density functional theory calculation and intermediate product analysis, three potential degradation pathways were proposed, with the cleavage of carbon bonds serving as the main degradation approach. The toxicity analysis demonstrated that the intermediates were generally less toxic than BPA during treatments. This research provides a fresh means for promoting a valence state cycling of ferric species in electro-Fenton system, which has potential applications in wastewater treatment containing emerging contaminants.

A Facilely Synthesized NiCo2S4 with Two Mutually Reinforcing Active Sites for High-Performance Lithium-Sulfur Batteries.

The shuttle effect and slow conversion kinetics of soluble polysulfides hinder the commercial application of lithium-sulfur batteries (LSBs). In this context, we propose a three-dimensional lamellar-stacked nanostructure of nickel cobalt sulfide (D-NiCo2S4) enriched with lattice defects by manipulating the cations in spinel sulfides. It has an obvious synergistic promotion mechanism for the adsorption and catalysis of lithium sulfides. Specifically, Ni3+ on tetrahedral (Td) sites with strong Ni-S covalency anchors LiPSs, whereas Co3+ on octahedral (Oh) sites promotes a highly efficient catalytic conversion of LiPSs, which is confirmed by experimental results and density functional theory (DFT) calculations. Besides, the crystal defects and distortions in the lamellar region could expose more active sites and enhance the redox reaction kinetics of polysulfides. Hence, Li-S batteries with D-NiCo2S4@S as the cathode show outstanding cycle stability; upon cycling at 1 A/g, the battery achieves a high initial specific capacity of 1001.12 and 655.31 mAh g-1 after 1000 cycles (decay rate as low as 0.05% per cycle), as well as a high initial areal capacity of 3.15 mAh cm-2 under high S loading (4.2 mg cm-2). This work provides a viable scheme for designing efficient bimetal sulfide catalysts and furnishes a rational strategy for constructing LSB cathodes with high specific capacity and high area capacity.

Ni-doped Fe-MOF@rGO nanohybrid as a functional separator for ultra‐long cyclability in lithium-sulfur cells

The slow conversion kinetics of polysulfides and undesired shuttling behavior significantly limit the practical feasibility of lithium-sulfur (Li-S) batteries. In light of this, a functional separator made of a composite material consisting of nickel/iron metal-organic frameworks supported on reduced graphene oxide (Ni/Fe-MOF@rGO) with numerous defects is proposed to produce heightened-performance Li-S batteries. Ni-doping Fe-MOF can improve the Li-S cell's electrochemical performance during charge-discharge cycles by increasing the number of metallic sites on the surface, enhancing electrical conductivity, and improving metal synergy. As a result of chemical interaction and physical adsorption, the polysulfide shuttle effect is diminished. Thus, the Li-S cell with electrocatalytic separators of Ni/Fe-MOF@rGO-PP generates 735, 678, 590, 431, and 403 mAh g-1 after 250, 500, 750, 1000, and 1250 cycles, respectively, at 1.0C, validating the low-capacity degradation per cycle with high long-cyclic. Furthermore, when the cell is operated under harsh conditions (4.3 mgsulfur cm-2 and electrolyte/sulfur (E/S) ratio is 7.0µLmg-1), the resulting capacity is still outstanding even after multiple charge and discharge cycles (4.0 mAh cm-2 after the 250th cycle). This implies that the utilization of Ni/Fe-MOF@rGO has the potential to function as an improved separator within commercially available Li-S cells.