Number Of Slots Research Articles

PROTOTYPE SISTEM KETERSEDIAAN DAN KAPASITAS TEMPAT PARKIR MOBIL BERBASIS ARDUINO UNO

The current parking system still uses a manual parking system, vehicle owners still have difficulty finding an empty parking space because they have to go around the parking area so it is less efficient and takes a long time. This study aims to help car drivers save time in finding parking locations and knowing the availability of parking spaces. In this study, there are two types of input used: infrared sensors, which function to measure the capacity of the parking space, and RFID sensors, which are used to detect cards. The data processing process is carried out using Arduino Uno, while the LCD is used to display the number of available parking slots and the location of the slot. In addition, the servo motor functions to open the barrier. This system operates in a way, when a car enters and attaches a registered card, the servo motor will open, and the number of parking slots will decrease. The driver then selects a parking slot, which will be automatically marked as "full" on the LCD screen. When the infrared sensor detects a car that wants to exit, the servo motor will open again, and the number of parking slots on the LCD will increase.

“There's just a lot of numbers and I just want to have a drink”: The challenge of communicating the energy content of alcohol products

Various governments are considering the implementation of energy labelling on alcohol products as one element of obesity prevention policies. However, little is known about the most effective ways to communicate energy information to consumers. The aim of the present study was to explore consumers’ reactions to different energy information provision formats to assist the development of effective energy labels. Nine focus groups (n=83 participants) were conducted with Australian adults who reported drinking alcohol at least twice per month. Participants were exposed to an energy-only information label and labels displaying full nutrition information panels. A thematic analysis approach was used to identify key issues. While few participants were overtly enthusiastic about the mandatory display of energy values on alcohol products, there was general support for the provision of this information to assist those drinkers who could benefit from it. Substantial confusion was apparent as participants attempted to distil meaning from the provided information, particularly where it was expressed in terms of serving sizes and standard drinks. Full nutrition panels were especially problematic in terms of creating a health halo due to the nil or low values for multiple nutrients listed. This was especially notable for information relating to sugar content. Overall, there appears to be inadequate public understanding of the concept of dietary energy in alcoholic beverages and the various terms used to quantify its presence, which is likely to limit the utility of mandatory energy information provision requirements unless they are accompanied by effective community education.

Analysis of the Selected Design Changes in a Wheel Hub Motor Electromagnetic Circuit on Motor Operating Parameters While Car Driving

The drive system of an electric car must meet road requirements related to overcoming obstacles and driving dynamics depending on the class and purpose of the vehicle. The driving dynamics of modern cars as well as size and weight limitations mean that wheel hub motors operate with relatively high current density and high power supply frequency, which may generate significant power losses in the windings and permanent magnets and increase their operating temperature. Designers of this type of motor often face the need to minimize the motor’s weight, as it constitutes the unsprung mass of the vehicle. Another limitation for motor designers is the motor dimensions, which are limited by the dimensions of the rim, the arrangement of suspension elements and the braking system. The article presents two directions in the design of wheel hub motors. The first one involves minimizing the length of the stator magnetic core, which allows for shortening of the axial dimension and mass of the motor but involves increasing the thermal load and the need for deeper de-excitation. The second one involves increasing the number of pairs of magnetic poles, which reduces the mass, increases the internal diameter of the motor and shortens the construction of the fronts, but is associated with an increase in the motor operating frequency and increased power losses. Additionally, increasing the number of pairs of magnetic poles is often associated with reducing the number of slots per pole and the phase for technological reasons, which in turn leads to a greater share of spatial harmonics of the magnetomotive force in the air gap and may lead to the generation of higher power losses and higher operating temperatures of permanent magnets. The analysis is based on a simulation of the motor operation, modeled on the basis of laboratory tests of the prototype, while the car is driving in various driving cycles.

Design of a Novel PMSM Topology With the Same Number of Poles and Slots

Design of a Novel PMSM Topology With the Same Number of Poles and Slots

Effects of slot-pole combinations on vibration and performance in fractional slot permanent magnet synchronous machines

Abstract Unbalanced Magnetic Force (UMF) is a critical factor that significantly impacts vibration and overall performance in Permanent Magnet Synchronous Machines (PMSMs). This study investigates the influence of different fractional slot combinations on UMF behavior in PMSMs using finite element analysis (FEA). The focus is on the canceling and additive effects of UMFs generated by radial and circumferential stresses. Two PMSM configurations with slot and pole numbers differing by one—26 poles/27 slots and 28 poles/27 slots—are analyzed to evaluate the effect of varying pole configurations while keeping the slot count constant. The analysis employed the Maxwell stress tensor method to quantify the UMFs in these designs. The results underscore the critical role of the magnet configuration in determining UMF characteristics, providing essential insights for optimizing machine design to minimize vibration and enhance performance. These findings serve as a valuable reference for designing and operating high-performance fractional slot PMSMs, particularly for industrial and automotive applications.

Improvement on Electromagnetic Performance of Axial–Radial Flux Type Permanent Magnet Machines by Optimal Stator Slot Number

To achieve the objective of high torque, a high utilization rate of PMs, and flexible flux regulation capability of the permanent magnet (PM) machine, an axial–radial flux type permanent magnet (ARFTPM) machine was studied in this paper. The working principle of the ARFTPM machine is analyzed by illustrating the flux paths. Then, the influence of stator slot number on the flux regulation capability and torque is studied. A full comparison of the main parameters and electromagnetic performances of the ARFTPM machine with different stator slot numbers is presented, including winding coefficient, back electromotive force (EMF), cogging torque, average torque, and torque-angle characteristics. The optimal stator slot number was obtained. Finally, the 12-slot/10-pole prototype machine is manufactured and tested to validate the simulation data and theoretical analysis.

A Matheuristic Approach Based on Variable Neighborhood Search for the Static Repositioning Problem in Station-Based Bike-Sharing Systems

In this paper, we study a novel static bike-sharing repositioning problem. There is a set of stations spread over a given area, each containing a number of operative bikes, damaged bikes, and free slots. The customers may pick up an operative bike from a station, use it, and return it to another station. Each station should have a target number of operative bikes to make it likely to meet customer demands. Furthermore, the damaged bikes should be removed from the stations. Given a fleet of available vehicles, the repositioning problem consists of designing the vehicles’ routes and calculating the number of operative (usable) and damaged (unusable) bikes that will be moved (loading instructions/loading policy) between stations and/or the depot. The objective is to minimize the weighted sum of the deviation from the target number of bikes for each station, the number of damaged bikes not removed, and the total time used by vehicles. To solve this problem, we propose a matheuristic based on a variable neighborhood search combined with several improving algorithms, including an integer linear programming model to optimize loading instructions. The algorithm was tested in instances based on real-world data and could find good solutions in reasonable computing times.

Generation of broadband airborne ultrasound using an Harmonic Acoustic Pneumatic Source

This paper presents a new type of airborne transducer for generating broadband ultrasound with a high Sound Pressure Level (SPL). The concept is based on the Harmonic Acoustic Pneumatic Source (HAPS) that uses pressurized air in conjunction with a flow chopper made up of a rotating cage with slots connected to a specific exhaust. The fundamental frequency depends on the number of slots and the rotation speed of the cage. An analytical model of the HAPS coupled with a numerical model of the exhaust is used to predict the radiated acoustic pressure and to estimate the influence of dimensional parameters on pressure level generated by the source. Experiments are conducted with two cages: one with one slot in order to generate pulses periodically and one with 122 slots to generate periodic sound. The level of sound pressure is measured as a function of distance (0.004 to 0.5 m), the cage rotation (up to 11 krpm) and directivity (0 to 90°). For the fundamental frequency at 22 kHz, the maximum SPL of 150 dB (632 Pa rms) is /measured at 0.004 m, and decreases to 122 dB (35 Pa rms) at 0.5 m. At 0.5 m, the second and third harmonics can generate a SPL equal or greater than 115 dB above 22 kHz and up to 66 kHz. Discrepancies between the experiments results and numerical model are observed in terms of SPL, directivity and in-axis pressure.

Novel Application of Quantum Computing for Routing and Spectrum Assignment in Flexi-Grid Optical Networks

Flexi-grid technology has revolutionized optical networking by enabling Elastic Optical Networks (EONs) that offer greater flexibility and dynamism compared to traditional fixed-grid systems. As data traffic continues to grow exponentially, the need for efficient and scalable solutions to the routing and spectrum assignment (RSA) problem in EONs becomes increasingly critical. The RSA problem, being NP-Hard, requires solutions that can simultaneously address both spatial routing and spectrum allocation. This paper proposes a novel quantum-based approach to solving the RSA problem. By formulating the problem as a Quadratic Unconstrained Binary Optimization (QUBO) model, we employ the Quantum Approximate Optimization Algorithm (QAOA) to effectively solve it. Our approach is specifically designed to minimize end-to-end delay while satisfying the continuity and contiguity constraints of frequency slots. Simulations conducted using the Qiskit framework and IBM-QASM simulator validate the effectiveness of our method. We applied the QAOA-based RSA approach to small network topology, where the number of nodes and frequency slots was constrained by the limited qubit count on current quantum simulator. In this small network, the algorithm successfully converged to an optimal solution in less than 30 iterations, with a total runtime of approximately 10.7 s with an accuracy of 78.8%. Additionally, we conducted a comparative analysis between QAOA, integer linear programming, and deep reinforcement learning methods to evaluate the performance of the quantum-based approach relative to classical techniques. This work lays the foundation for future exploration of quantum computing in solving large-scale RSA problems in EONs, with the prospect of achieving quantum advantage as quantum technology continues to advance.

A Fair MAC Protocol Based on Dual Bandwidth Allocation Iterations in Underwater Acoustic Sensor Networks

ABSTRACTMost existing passive allocation‐based media access control (MAC) protocols for underwater acoustic sensor networks (UASNs) overlook the fairness issue in channel bandwidth allocation, resulting in certain nodes occupying channel resources for extended periods, thereby leading to low channel utilization. To address this issue, this paper proposes a fair MAC protocol based on dual bandwidth allocation iterations (FBA‐MAC). Firstly, by limiting the maximum number of packets and the maximum number of available time slots that the host node can receive in each communication cycle, the protocol reduces collisions and collisions more effectively, thus controlling the communication delay. Secondly, in the process of channel bandwidth allocation, a dual bandwidth allocation iterative method was used to allocate appropriate channel bandwidth for each member node according to its communication requirements and the generation time of its generated data packets. Finally, in order to minimize the time interval of each packet arriving at the host node to reduce the communication delay, the transmission scheduling scheme was adaptively adjusted by combining the results of channel bandwidth allocation to maximize the channel utilization. Simulation results indicate that compared to the other four MAC protocols, FBA‐MAC demonstrates significant advantages in terms of fairness (10% higher), achieving higher network throughput (10% higher) and shorter end‐to‐end delay. Therefore, FBA‐MAC exhibits superior adaptability and efficiency in dynamic network environments.

Dynamic Flexible Allocation of Slots in Container Line Transport

Due to the imbalance between supply and demand, liner container transportation often faces the problem of low slot utilization, which will occur in the shipping process, such as dry container demand exceeding the available dry slots and reefer slots not being fully utilized. This makes it important and challenging to maintain a balance between the actual demand and the limited number of slots allocated for liner container transport. Therefore, this study proposes a flexible allocation method: expanding the types of containers that can be loaded in the same slot. This method is suitable for handling each dynamic arrival container booking request by shipping enterprises, making decisions to accept or reject, and flexibly allocating shipping slots. In order to maximize the total revenue generated by accepting container booking requests during the entire booking acceptance cycle, we establish a dynamic programming model for the flexible allocation of slots. For model solving, we use the Q-learning reinforcement learning algorithm. Compared with traditional heuristic algorithms, this algorithm can improve solving efficiency and facilitate decision-making at the operational level of shipping enterprises. In terms of model performance, examples of different scales are used for comparison and training; the results are compared with the model without flexible allocation, and it is proved that the model proposed in this paper can obtain higher returns than the model without flexible allocation. The results show that the model and Q-learning algorithm can help enterprises solve the problem of the flexible allocation of shipping slots, and thus, this research has practical significance.

Small interval interpolation fitting bootstrapping method based on residue number system

Aiming at the problem that the bootstrapping time of approximate homomorphic encryption scheme is too long, a small interval interpolation fitting method based on residue system is proposed. In this paper, the sinusoidal function by using interpolating and fitting method between the multiple cells to avoid the increase in bootstrapping time or decrease in calculation accuracy caused by the high degree of fitting polynomial is calculated. And the efficiency of modular multiplication and modular inversion in the calculation process is improved by combining the residual system. Lagrange interpolation polynomial is used to interpolate and fit the sine function among different intervals. The comparison function is implemented by the compound implementation of low-degree polynomials, and an interval judgment algorithm is proposed to identify the interval of the ciphertext. Finally, under the precision of 24 bits, the modular operation time in the bootstrapping process decreased to 8% of the HEAAN. When the number of slots is 65 536, the average module operation time per slot is 0.028 ms.

Influence of guide groove structure on in-flow drag reduction in spiral axial gas-liquid mixing pumps

Abstract With the onset of the fossil energy crisis, demand for oil has skyrocketed, and the spiral axial flow gas-liquid mixing pump has emerged as the primary piece of equipment for deep-sea oil extraction. However, at high gas content, the problems of separation of mixed media from hydraulic components, gas-liquid separation and gas phase aggregation are faced. The difficulties of gas-phase aggregation and bubble trajectory in the impeller channel have received much attention, while the problem of increased medium flow resistance induced by flow separation has received less attention. The spiral axial gas-liquid mixing pump is numerically calculated using the Eulerian multiphase flow model and the SST k- turbulence model in this work. The pump is designed with the design flow rate Q = 100 m3/h, rotational speed n = 4500 rmin, and head H = 30m by arranging guide slots with different relative depths and different number of slots to reduce the dissipative vortices, thus reducing the flow resistance in the 1/5 region behind the suction surface. The findings reveal that when the relative depth of the slots is 1/7 and the number of guide slots arranged is 5, the highest drag reduction rate in this location is 69.6% under the design flow condition. When the relative depth of the guide channel is1/7 and the number of guide channels is 3, the performance of the mixing pump is improved most, with an efficiency increment of 1.9% and a head increment of 4.2%, which can provide technical support for the flow resistance reduction of gas-liquid mixing pumps.

The complexity of growing a graph

We study a new algorithmic process of graph growth which starts from a single initial vertex and operates in discrete time-steps, called slots. In every slot, the graph grows via two operations (i) vertex generation and (ii) edge activation. The process completes at the last slot where a (possibly empty) subset of the edges of the graph are removed. Removed edges are called excess edges. The main problem investigated in this paper is: Given a target graph G, design an algorithm that outputs a process that grows G, called a growth schedule. Additionally, we aim to minimize the total number of slots k and of excess edges ℓ used by the process. We provide both positive and negative results, with our main focus being either schedules with sub-linear number of slots or with no excess edges.

Design and Analysis of a Highly Reliable Permanent Magnet Synchronous Machine for Flywheel Energy Storage

This article aims to propose a highly reliable permanent magnet synchronous machine (PMSM) for flywheel energy-storage systems. Flywheel energy-storage systems are large-capacity energy storage technologies suitable for the short-term storage of electrical energy. PMSMs have been used in the flywheel energy-storage systems due to their advantages. One of the key requirements for PMSMs in flywheel energy-storage systems is high reliability. A double redundant winding structure is adopted to ensure fault-tolerant operation of the PMSM. The stator is designed with auxiliary teeth to reduce the short-circuit current. Moreover, the number of slots and poles is determined to ensure the winding factor, heat dissipation, and reduce losses. Moreover, the dual three-phase stator winding structure and auxiliary teeth are adopted on the PMSM to improve reliability. Afterward, the electromagnetic performance is analyzed, and the mechanical stress is investigated to ensure mechanical strength. Finally, a prototype is built and tested to verify the theoretical analysis and performance of the PMSM.

Prompt-Based End-to-End Cross-Domain Dialogue State Tracking

Cross-domain dialogue state tracking (DST) focuses on using labeled data from source domains to train a DST model for target domains. It is of great significance for transferring a dialogue system into new domains. Most of the existing cross-domain DST models track each slot independently, which leads to poor performances caused by not considering the correlation among different slots, as well as low efficiency of training and inference. This paper, therefore, proposes a prompt-based end-to-end cross-domain DST method for efficiently tracking all slots simultaneously. A dynamic prompt template shuffle method is proposed to alleviate the bias of the slot order, and a dynamic prompt template sampling method is proposed to alleviate the bias of the slot number, respectively. The experimental results on the MultiWOZ 2.0 and MultiWOZ 2.1 datasets show that our approach consistently outperforms the state-of-the-art baselines in all target domains and improves both training and inference efficiency by at least 5 times.

Influence of Fractal Disc Filter Flow Channel Parameters on Filtration Performance

The research and development of a new disc filter is a key link in intelligent irrigation systems, the core of efficient and water-saving irrigation development, and also an important joint effort to ensure a clean water source in micro-irrigation systems. In this paper, the independent research and development of the fractal flow passage disc filter was taken as the research object, and the disc filter numerical simulation cell (FLUENT) and artificial intelligence technology (Back Propagation Neural Network) were combined to optimize the filter flow channel parameters, including the tilt angle, the length and height of the bottom of the internal section triangle, the taper, the position and number of buffer slots, etc. A new type of disc filter with lower head loss, larger flow capacity, higher filtration efficiency, and longer running time is proposed. It has certain reference value and promotion significance for the future development and design of high-performance disc filters and their wide use.

Slot-Loaded Vivaldi Antenna for Biomedical Microwave Imaging Applications: Influence of Design Parameters on Antenna's Dimensions and Performances.

This paper demonstrates the design steps of a slot-loaded Vivaldi antenna for biomedical microwave imaging applications, showing the influence of the design parameters on the antenna's dimensions and performances. Several antenna miniaturization techniques were taken into consideration during the design: reduction in the electromagnetic wavelength by using a high-permittivity substrate material (relative permittivity ϵr=10.2), the placement of the antenna inside a coupling medium (ϵr=23), and the elongation of the current path by etching slots on each side of the radiator to reduce the antenna's lowest resonant frequency without increasing its physical dimensions. Moreover, an analysis of different antenna slot design scenarios was performed considering different slot lengths, inclination angles, positions, and numbers. Considering the frequency range of microwave imaging (i.e., about 500 MHz-5 GHz) and the array arrangement typical of microwave imaging, the best design was chosen. Finally, the antenna was fabricated and its performances in the coupling medium were characterized. The simulation and measurement results showed good agreement between each other. In comparison with literature antennas, the one developed in this work shows wide bandwidth and compact dimensions.

Optimization design of hydrocyclone with overflow slit structure based on experimental investigation and numerical simulation analysis

This study aims to address the issue of high energy consumption in the hydrocyclone separation process. By introducing a novel slotted overflow pipe structure and utilizing experimental and response surface optimization methods, the optimal parameters were determined. The research results indicate that the number of slots, slot angles, and positioning dimensions significantly influence the performance of the hydrocyclone separator. The optimal combination was found to be three layers of slots, a positioning dimension of 5.3 mm, and a slot angle of 58°. In a Φ100mm hydrocyclone separator, validated through multiple experiments, the separation efficiency increased by 0.26% and the pressure drop reduced by 24.88% under a flow rate of 900 ml/s. CFD simulation verified the reduction in internal flow field velocity and pressure drop due to the slotted structure. Therefore, this study provides an effective reference for designing efficient and low-energy hydrocyclone separators.

Multiobjective Optimization of the PMSM With the Same Number of Poles and Slots Considering Dynamic Response and Torque Performance

Multiobjective Optimization of the PMSM With the Same Number of Poles and Slots Considering Dynamic Response and Torque Performance