Skin Friction Research Articles

An experimental investigation into the drag reduction performance of dimpled plates in a fully turbulent channel flow

Dimpled surfaces have gained increasing attention in recent years for their potential to reduce turbulent skin friction, a capability previously acknowledged for its beneficial implications on heat transfer. As a passive drag reduction method, dimpled surfaces offer significant advantages for marine applications due to their effectiveness and practical applicability. However, despite numerous studies, conflicting opinions and inconsistent drag reduction rates persist in the literature. This paper addresses these ambiguities and offers valuable insights into the effectiveness of dimpled surfaces for drag reduction in fully turbulent flows. We conducted an extensive experimental investigation involving various dimple configurations, including different depth-to-diameter ratios, diameters and orientations, utilising a specialised Fully Turbulent Flow Channel facility and a Particle Image Velocimetry system. Our findings demonstrated that circular dimple geometries, particularly those with low depth ratios, can achieve significant drag reduction of up to 27% as the Reynolds number increases. These results highlight the substantial potential of dimpled surfaces for improving energy efficiency in marine applications, where skin friction accounts for a significant portion of the total drag experienced by large vessels.

Forced convective tangent hyperbolic nanofluid flow subject to heat source/sink and Lorentz force over a permeable wedge: Numerical exploration

Abstract The magnetohydrodynamics tangent hyperbolic nanofluid (THNF) flow with the mutual impact of melting heat transfer and wedge angle over a permeable wedge is investigated numerically in the present study. Electronic devices generate excessive heat during operations, so THNF is often employed to regulate them. THNF has the ability to neutralize heat with greater efficacy, thereby reducing the probability of overheating. The influence of thermal radiation, Soret and Dufour, and heat source/sink is also observed on the fluid flow. The modeled equations are simplified to the lowest order through the similarity conversion. The obtained set of dimensionless equations is further calculated numerically by employing the parametric continuation method. The computational findings of the present study are compared to the published results for accuracy purposes. It has been detected that the results are precise and reputable. Moreover, from the graphical results, it has been perceived that the effect of permeability factor (K p) reduces the fluid flow. The rising effect of wedge angle factor enhances the energy dissemination rate and shearing stress; however the augmentation of Weissenberg number drops skin friction and energy transference rate.

Impact of the Stefan gusting on a bioconvective nanofluid with the various slips over a rotating disc and a substance-responsive species

This paper presents thorough computational and theoretical analyses of steady forced convective flow over a rotating disc submerged in a water-based nanofluid containing microorganisms. It delves into the examination of boundary layer flow characteristics of a viscous nanofluid, considering Stefan blowing effects and multiple slip conditions influenced by a magnetic field. Notably, the study accounts for novel aspects such as thermal radiation and both constructive and destructive chemical reactions. The movement of nanoparticles is elucidated based on thermophoresis and microscopic behaviors, while changes in volume fraction do not affect the thermo-physical properties of the nanofluid. To address the altered nonlinear set of differential equations, an effective numerical approach, the Keller-Box method, is implemented for critical and efficient solutions. These appropriate transformations are defined and applied. When compared to blowing suction, it shows a better enhancement in the rate of heat transfer, mass, and microorganisms. Some of the main observations are there is a decrease in wall skin friction in the directions of radial and tangential as magnetic field strength is increased. The evaluation of thermal boundary layer thickness and temperature is noted for the radiation parameter (Rd) improvement. The present analysis has applications in electromagnetic micro-pumps and nanomechanics. As to the applications in the science and engineering fields, technologies such as micro-electromechanical systems-based microfluidic devices and microfluidic-related technologies will be accepted.

Nanoparticle aggregation and electro-osmotic propulsion in peristaltic transport of third-grade nanofluids through porous tube

In the modern era, the utilization of electro-kinetic-driven microfluidic pumping procedures spans various biomedical and physiological domains. The present study introduces a mathematical framework for characterizing the hemodynamics of peristaltic blood flow within a porous tube infused with ZrO2 nanoparticles. This model delves into the interactions between buoyancy, electro-osmotic forces, and aggregated nanoparticles to discern their influence on blood flow. We employ a third-grade fluid model to elucidate the rheological behavior of the pseudoplastic fluid which refers to its response to applied shear stress, specifically the relationship between shear rate and viscosity. The collective influence of accommodating heat convection, joule heating and aggregated nanoparticles contributes to the thermal behavior of fluids. The distribution of electric potential within the electric double layer (EDL) is predicted by solving the Poisson–Boltzmann equation. The rescaled equations are simplified using the lubrication and Debye-Hückel models as the underlying frameworks. The novel homotopy perturbation method is employed to obtain solutions for the finalized non-linear partial differential equation. Theoretical assessment of hemodynamic impacts involves plotting graphical configurations for various emerging parameters. As electro-osmotic parameter increase, the bloodstream encounters greater impedance, thereby enhancing the effectiveness of electro-osmotic assistance. Concurrently, elevated convective heat markedly reduces the rate of heat transfer, potentially resulting in a drop in blood temperature. It is important to note that maximum shear stress occurs when the artery is positioned horizontally, underscoring the significant impact of arterial alignment on wall shear stress. Skin friction intensifies with the increasing wall permeability as aggregated nanofluids pass through the arterial conduit. Therefore, aggregation of nanoparticles into the bloodstream yields a broader spectrum of distinctive physiological features. In summary, these findings enable more effective tool and device designs for addressing medication administration challenges and electro-therapies.

Inclined magnetic field and joule heat on unsteady ternary nanofluidic flow impinging over a convectively heated cylinder

The present analysis considered the condition of unsteady stagnation point flow on ternary nanofluid [Formula: see text] through the regularly affecting and convective heated stretchable cylinder by the effect on inclining Lorentz force. This influence on thermal radiation, velocity slip, viscous dissipation, and Joule dissipation were again integrated by the analysis. The suitable thermo-physical relationship in the hybrid nanofluid is cultivated into followed Xue form. With the help of appropriate comparison alterations, the controlling dimensional numerical equations were transformed by the dimensionless models. The governing equations are transformed through comparison transformation and mathematically tackled in MATLAB with a boundary value problem algorithm. These mathematical solutions were validated with the presented material. Tabular and graphical descriptions of mathematical information were utilized to analyze the physical effect on different relevant parameters in the ternary nanofluid temperature and velocity. This thermal buoyancy force hikes the fluid flow although the opposite direction was noted in magnetic parameters and velocity slips. This heat transport rate in the surface was enhanced by an improvement in thermal radiation, Biot number, and solid fraction of nanoparticles. Moreover, a 44.9754% enhanced decreased skin friction is observed by triple nanoparticle nanofluid it signifies its best behavior as related to both other nanofluids.

Numerical Comparison of Cu and Al\(_2\) O\(_3\) Nanoparticles in an MHD Water-based Nanofluid

In this study, the impact of Cu and Al2O3 nanoparticles in a water-based nanofluid are considered. The application of this can be found in biomedical sensors and drug delivery. Specifically, it investigates heat transfer in the MHD flow of two nanofluids (Cu-water and Al2O3-water) over an exponentially stretching surface. The study formulates a model and renders it dimensionless using Similarity Transformation. Numerical solutions are obtained using the MATLAB package bvp4c. The focus is on analysing the heat transfer rate variation with nanoparticle volume fraction. Results indicate that Cu-water nanofluid exhibits higher heat transfer rates and lower skin frictions compared to Al2O3-water nanofluid.

Enhanced transport phenomena in Casson fluid flow over radiative moving surface: Influence of velocity and thermal slip conditions with mixed convection and chemical reaction

Researchers are interested in the non-Newtonian fluid flow with mixed convection because of its extensive use in industry and manufacturing. Additionally, thermal radiation in convective heat transfer is critical for thermal transmission regulation. As a result, the authors provide an in-depth study of how mixed convective effects on concentration and temperature impact mass, heat, and non-Newtonian Casson fluid flow. A transverse magnetic field and vertical permeable stretched sheet affect the fluid. Nonlinear thermal radiation, Brownian motion, thermophoresis, velocity slip, and temperature slip are all examined. The governing nonlinear partial differential equations (PDEs) can be changed into especially nonlinear coupled ordinary differential equations (ODEs) with the right similarity transformation. We use the RK-45 technique in Mathematica to solve the system to accommodate different physical attributes. The data are analyzed graphically. This study shows that increasing the free convection parameters [Formula: see text] and [Formula: see text] improves the velocity profile. However, the Casson parameter, magnetic field, velocity slip, and mass suction parameter lower it. Increasing [Formula: see text], and [Formula: see text] parameters lead to a higher temperature profile, whereas [Formula: see text], and [Formula: see text] parameters have the opposite. Increased concentration is shown with [Formula: see text] and [Formula: see text] parameters, whereas [Formula: see text] and [Formula: see text] have the opposite impact. Skin friction increases against [Formula: see text] and [Formula: see text] and reduces for S and M Heat transfer increases for [Formula: see text] and S whereas reduces for [Formula: see text] and [Formula: see text] Mass transfer increases for [Formula: see text] and [Formula: see text] and reduces for [Formula: see text] and [Formula: see text].

Analytical and numerical study of water-based silver nanofluid (Ag) across a Riga plate with nonlinear radiation and viscous dissipation: A three-dimensional study

The primary endeavor of this investigation is to determine the Darcy–Forchheimer flow of water-based silver nanofluid (Ag) across a bidirectional Riga plate with viscous dissipation and nonlinear radiation. By manipulating the pertinent variables, the governing equations undergo a transformation into nonlinear ordinary differential equations. The remodeled flow problems are investigated numerically and analytically using the MATLAB (bvp4c built-in function) algorithm and the homotopy analysis method scheme. The repercussions of the appropriate factors on the x− and y− direction velocity profiles, temperature profile, skin friction coefficient of the x− and y− directions, and local Nusselt number are examined via tables and graphs. It is found that both directional fluid velocities decline in the presence of the suction/injection parameter. Increasing the radiation parameter and the Eckert number exalts the fluid temperature. The surface shear stress decays as the suction/injection parameter and the Forchheimer number grow larger. In addition, a greater heat transfer rate appears on the Riga plate compared to the stationary plate.

Entropy analysis of Hall effect with variable viscosity and slip conditions on rotating hybrid nanofluid flow over nonlinear radiative surface

PurposeWith possible uses in engineering and industrial processes, this work aims to further our knowledge of fluid dynamics and heat transfer in complicated flow configurations. This study looks at how Al2O3−Cu/H2O hybrid nanofluids move across a nonlinear radiative 3D unsteady surface. It tries to figure out what happens when the Hall current, variable viscosity, viscous dissipation, velocity and thermal slip conditions work together. The goal of this analysis is to provide insight into the system's thermodynamic behavior and the ways in which these elements affect the flow's entropy generation. MethodologyThe controlling system is converted into nonlinear nondimensional partial differential equations (PDEs) by applying suitable non-similar transformations. In this work, the governing equations are simulated using the local non-similarity (LNS) approach up to the second truncation level using the numerical technique bvp4c in MATLAB. FindingsThe temperature, velocity, entropy production, skin friction in both directions, and Nusselt number profiles of the nanofluid and hybrid nanofluid are detailed in many figures. The tabular form contains the results of computing the local Nusselt number for linear, nonlinear, and radiation-free scenarios. The velocity profiles in both directions and the temperature profile grow as the rotation parameter and nanoparticle volume fraction parameter increase. Conversely, the velocity profiles drop when the variable viscosity parameter falls, while the temperature profile increases. When the unsteadiness parameter A is set to 0.5 and the nanoparticle volume fraction is 1%, hybrid nanofluid has 4.26% lower x-direction skin friction than nanofluid and 3.62% greater y-direction friction. When the unsteadiness parameter A = 0.5 and the nanoparticle volume percentage is 1%, a hybrid nanofluid has a 2.77% higher Nusselt number than a nanofluid. The generation of entropy was also enhanced by an increase in the volume fraction of nanoparticles, radiation, temperature ratio, and Brinkman number. We evaluate and contrast the results of this study with those of earlier research.

Tangent hyperbolic nanofluid flow through a vertical cone: Unraveling thermal conductivity and Darcy–Forchheimer effects

Purpose: This paper demonstrates the way tangent hyperbolic nanofluid flow through a vertical cone is influenced by varying viscosity and varying thermal conductivity. This study also seeks to illustrate the impact of convective boundary conditions on a fluid. The mathematical modeling also takes the Darcy–Forchheimer effect into account. Methodology: Using the appropriate similarity transformation, the fluid problem is reduced into a set of nonlinear ordinary differential equations. These systems of differential equations are evaluated numerically by applying the Optimal Homotopy Asymptotic Method. Findings: The nature of emergent parameters is examined in relation to the temperature distribution, nanoparticle concentration profile, and velocity profile. An increase in variable viscosity corresponds to a decrease in fluid velocity, while enhanced thermal conductivity results in elevated fluid temperature. The skin friction coefficient, Sherwood, and Nusselt numbers are numerically examined for active concerned parameters. These findings can be put into practice in a variety of fields such as polymer cooling systems and medication. Originality: Existing literature has yet to explore the combination of tangent hyperbolic nanofluids with varying viscosity and thermal conductivity under convective boundary conditions.

Unsteady MHD flow analysis of hybrid nanofluid over a shrinking surface with porous media and heat generation: Computational study on entropy generation and Bejan number

The use of hybrid nanofluids in real-world situations is essential for enhancing the efficiency of heat transmission, especially in cooling semiconductor technology and industrial processes. The entropy generation on unsteady Al2O3-Cu/H2O hybrid nanofluid flow over a three-dimensional shrinking sheet is addressed numerically in this study, taking into account the effects of magnetohydrodynamic (MHD), nonlinear thermal radiation, porous media, heat generation, viscous dissipation, joule heating, and convective conditions. Using well-known non-similarity transformations, the model is carefully converted from partial differential equations (PDEs) to ordinary differential equations (ODEs). Afterwards, the behaviors of critical physical characteristics are uncovered across different parameter configurations by a numerical solution using the finite difference technique in bvp4c MATLAB. The velocity profiles of hybrid nanofluid grow proportionately with increases in the values of ϕ2,M,A,K and λ parameters. As Rd,θw,Ec,Bi,H and ϕ2 increase, the temperature of the hybrid nanofluid rises, but as M and A increase, the temperature falls. The local skin friction in both the x and y- directions is increased by enhancing the unsteadiness A, nanoparticle volume fraction ϕ2, magnetic M, porous media K, and the ratio of strain rate λ parameter on the shrinking surface. The local Nusselt number is improved by cumulative the unsteadiness A, nanoparticle volume fraction ϕ2, magnetic M, and Biot number Bi parameter in the direction of a shrinking surface, while the Nusselt number decreases when Eckert number Ec, thermal radiation Rd, heat production H, and temperature ratio θw are improved. An upsurge in the magnetic parameter leads to the development of entropy generation. Increasing levels of the magnetic parameters led to a reduction in the Bejan number. At a nanoparticle volume fraction of 1 % and a nonlinearity radiation scenario, where the unsteadiness values are 0.5, the Nusselt number for hybrid nanofluid shows an estimated improvement of 10.55 % compared to regular nanofluid.

Bejan number and entropy generation analysis of unsteady MHD non-Newtonian micropolar squeezed trihybrid nanofluid flow

Microscopic particles have incredible thermal conductivity making them essential in nanotechnology, electronics, materials science and heat exchangers. For suitable optimization of thermic engineering structure, thermal transportation has to increased but minimized the entropy generation. One of the basic reasons for the developing interest in tri hybrid nanofluids is its unique ability to increase thermal characteristics, that is very useful in numerous heat exchangers. Three distinct nanosized particles, namely silver, gold and diamond are considered with water as a base liquid. A set of dimensionless ODE’s are solved numerically by Bvp4c technique. The results of prominent parameters are elaborated and graphs are presented for velocity profile, entropy profile, Bejan and temperature profiles. Moreover, present result is compared with the literature and found a good agreement. It is observed that the Bejan number and entropy generation shows the opposite behavior for higher values of Casson and magnetic parameter. Further, it is noted that at the lower disk, squeezed Reynold number increases the skin friction coefficient and opposite trend noted against the upper disk. Temperature profile shows increasing trend for higher values of Eckert number. It is also noted that both velocities, temperature, entropy and Bejan number profiles for tri-hybrid nanofluid flow attains maximum values as compared to bi-hybrid and mono nanoparticles.

3D Numerical Modeling of Negative Skin Friction Effects on Tapered Piles in Soft Soils

3D Numerical Modeling of Negative Skin Friction Effects on Tapered Piles in Soft Soils

Combustion performance of hydrogen fueled parallel wall-jet used for drag reduction in a supersonic combustor

Hydrogen fueled parallel wall-jet combustion is considered to be one of the most promising drag reduction technologies in supersonic combustors, researchers mainly focus on its drag reduction mechanism, while balancing its combustion efficiency and drag reduction performance is of great significance for engine performance and energy conservation. In this paper, combustion performance of hydrogen fueled parallel wall-jet is numerically investigated. Kinetic reaction rate and scalar dissipation rate are defined to decouple the chemical reaction and mixing processes. Results indicate that although hydrogen fueled parallel wall-jet combustion is a nonequilibrium chemical reaction process, the combustion process is dominated by mixing due to the much larger magnitude order of kinetic reaction rate. The investigation also reveals that, compared to the effects of mainstream total temperature, mainstream Mach number presents a more significant effect on combustion efficiency. Moreover, combustion efficiency increase first brings negative and then brings beneficial effects on drag reduction performance, which is due to the different sensibilities of the two skin friction determinants viscosity and velocity gradient to combustion efficiency. It is found that, viscosity is more sensitive to combustion efficiency, with combustion efficiency increases by 5.4 %, viscosity increases by 4.15 %, while velocity gradient only decreases by 2.19 %.

Fractional Analysis of Magnetohydrodynamics Maxwell Flow Over an Inclined Plate with the Effect of Thermal Radiation

This current study provides a comprehensive examination of a novel method for studying the dynamics of a fractionalized Maxwell flow near an inclined plate, considering non-uniform mass transfer through a permeable media. Through the use of partial differential equations, incorporating heat and mass movement effects, the study employs a combination of generalized Fick’s and Fourier’s law with the Caputo operator. Transforming the fractionalized model into dimensionless form using appropriate dimensionless values, semi-analytical solutions for the non-dimensional transmitted fractional model are obtained via the Laplace transformation method. Through graphical analysis, the precise contributions of key parameters such as heat generation, radiation, and chemical reactions are elucidated, including their impacts on the calculated heat generation parameter (Qo), radiation parameter (Nr), and others. The study’s significance lies in its implications for the design of efficient heat exchangers, fluid flow systems, and cooling components in complex engineering systems, including nuclear reactors and power generation plants. Furthermore, the fractional derivative approach offers a more accurate representation of the viscoelastic behavior of materials like polymers, crucial for optimizing fabrication processes such as extrusion and molding. The insights gained from this study extend to the realm of miniaturized fluidic devices, including bio-analysis tools, lab-on-a-chip technology, and microfluidic drug delivery systems, where improved performance and control need a grasp of Maxwell fluid dynamics. The physical outcome of this research lays the groundwork for future investigations that will maximize heat transfer efficiency in real-world systems and give insightful information on the behavior of complicated fluids. We compute and display the skin friction, mass and heat transfer rate in tabular form.

Numerical analysis of non-linear radiative Casson fluids containing CNTs having length and radius over permeable moving plate

Abstract Casson fluids containing carbon nanotubes of various lengths and radii on a moving permeable plate reduce friction and improve equipment efficiency. They improve plate flow dynamics to improve heat transfer, particularly in electronic cooling and heat exchangers. The core objective of this study is to investigate the heat transmission mechanism and identify the prerequisites for achieving high cooling speeds within a two-dimensional, stable, axisymmetric boundary layer. This study considers a sodium alginate-based nanofluid containing single/multi-wall carbon nanotubes (SWCNTs/MWCNTs) and Casson nanofluid flow on a permeable moving plate with varying length, radius, and nonlinear thermal radiation effects. The plate has the capacity to move either parallel to or perpendicular to the free stream. The governing partial differential equations for the boundary layer, which are interconnected, are transformed into standard differential equations. These equations are then numerically solved using the Runge–Kutta fourth-order scheme incorporated in the shooting method. This research analyses and graphically displays the effects of factors including mass suction, nanoparticle volume fraction, Casson parameter, thermal radiation, and temperature ratio. Additionally, a comparison is made between the present result and the previous finding, which presented in a tabular format. The coefficient of skin friction decreases in correlation with an increase in Casson fluid parameters and Prandtl number. Heat transfer rate decreases with a variation in viscosity parameter, while it is increasing with an increase in Prandtl number. In addition, this study demonstrates that heat transfer rate for MWCNT is significantly higher than that of SWCNT nanoparticles. Thermal radiation and temperature ratio reduce the heat transfer rate, whereas nanoparticle volume fraction and Casson parameter enhance it over a shrinking surface.

Consequences of Thermal Diffusion and Chemical Reaction on Mixed Convection MHD Casson Fluid through Porous Media with Inclined Plates

In this present article, we analyzed the effects of Thermal diffusion and chemical reaction on nonlinear mixed convection MHD flow of viscous, incompressible and electrically conducting fluid past an inclined porous channel under the influence of thermal radiation and chemical reaction. The transformed conservation equations are solved analytically subject to physically appropriate boundary conditions by using two term perturbation technique. The numerical values of fluid velocity, fluid temperature and species concentration are displayed graphically whereas those of skin friction coefficient, rate of heat transfer and rate of mass transfer at the plate are presented in tabular form for various values of pertinent flow parameters. It is observed that the velocity is decreased with increasing magnetic field parameter. The resultant velocity and concentration has enhances with increasing thermal diffusion parameters. The study is relevant to chemical materials processing applications.

The Soret-Dufour Effects on Three-Dimensional Magnetohydrodynamics Newtonian Fluid Flow over an Inclined Plane

The three-dimensional (3D) model of the fluid flow model with length, breadth, and height or depth is the advanced and precise version from the two-dimensional (2D) model which just lies on a flat surface. The heat transfer in the boundary layer flow have numerous applications in the production of polymer, plastic films, and paper production. Therefore, this paper solves 3D magnetohydrodynamics Newtonian fluid flow model with the effect of Soret-Dufour parameters. Compared with the previous report where the 3D model is without the inclination angle (all the axes are located at their fixed position), this paper considers the boundary xy-plane being projected by a certain angle from the z-axis. The initial partial differential equations (PDEs) are subsequently reduced to ordinary differential equations (ODEs). The MATLAB bvp4c program is chosen to solve the ODEs and the results velocity profile, temperature profile, concentration profile, skin friction coefficient, local Nusselt number, and local Sherwood number. It can be inferred that the magnetic parameter is responsible to the decrement of the velocity profile and skin frictions coefficient. The enhancement of the temperature and the local Sherwood number are caused by the Dufour number. Besides, concentration and the local Nusselt number are enhancing due to the increasing Soret number.

The evaluation of error estimation for the Casson hybrid nanofluid flow in the uniform gap between two tubes for drug delivery applications

ABSTRACT Hybrid nanofluids are capable of being used as a carrier for delivering drugs to targeted areas in the body. For this purpose, the Casson hybrid nanofluids (HNFs) flow is suggested between the gap of two tubes. The study involves analyzing blood-based hybrid nanofluids (HNFs) that consist of silver (Ag) and titanium dioxide (TiO2) nanoparticles for applications of drug delivery. Titanium oxide nanoparticles, or TiO2 NPs, have strong photoactivity, low toxicity, and excellent biocompatibility, making them promising candidates for cancer treatment. The attractiveness of silver nanoparticles (AgNPs) for cancer therapy is due to their unique properties. Graphic representations are provided based on the simulations of non-dimensional velocity, temperature, and skin friction under physical parameter variations, for the applications of drug delivery are investigated and discussed. The control volume finite element method (CVFEM), is used to solve the problem. The new strategy of artificial neural networks (ANN) is also used to solve the transform equations. Nanoparticles increase drug stability and extend shelf life by protecting them from degradation or inactivation.

Numerical study of hybrid binary Al2O3-Cu-H2O nanofluid coating boundary layer flow from an exponentially stretching/shrinking perforated substrate with Cattaneo-Christov heat flux, heat source, suction and multiple slip effects

Modern coating systems are increasingly deploying nanomaterials which offer improved thermal performance. The optimization of these systems can benefit from more elegant fluid dynamic models of the coating process. Inspired by these advancements, the present investigation introduces a novel mathematical model to analyze the boundary layer transport in Al2O3-Cu-H2O hybrid binary nanofluid coating deposition on an exponentially stretching porous substrate (sheet). Lateral mass flux (suction) at the wall is also considered a heat source (generation) for hot spot manufacturing effects. To add further sophistication to the thermal conduction model, a non-Fourier approach is adopted which accurately incorporates thermal relaxation effects i.e. the Cattaneo-Christov heat flux (CCHF) model. The Tiwari-Das volume fraction nanoscale formulation is implemented for different combinations of Alumina (Al2O3) and Copper (Cu) metallic nanoparticles in an aqueous base fluid (H2O). Hydrodynamic wall and thermal slip are also included as they feature in coating processes. The fundamental equations governing mass, momentum, and energy conservation, along with the corresponding conditions at the wall (substrate) and free stream, are made dimensionless through suitable scaling similarity transformations. The resulting nonlinear coupled ordinary differential boundary value problem is subsequently addressed using the efficient MATLAB bvp4c routine. Special cases of the non-Fourier model are validated against published results, and the general model is further confirmed through validation using an Adams-Moulton 2-step predictor-corrector algorithm (AMPC). Furthermore, dual solutions of the generalized model are extracted and visualized. A comprehensive study of the effects of key thermophysical key parameters on momentum and thermal characteristics (velocity, temperature, skin friction and local Nusselt number) is conducted and solutions are visualized graphically. The computations show that higher temperatures are present with intensification in the thermal relaxation parameter (Cattaneo-Christov hyperbolic model parameter), which predicts therefore larger temperatures than the classical Parabolic heat conduction model using Fourier analysis. Effectively, thermal relaxation is responsible for finite heat wave propagation and produces more accurate estimations of heat transfer than the Fourier model. An increase in stretching parameter enhances the skin friction coefficient and elevates the local Nusselt number. As the thermal relaxation parameter increases, the temperature magnitudes corresponding to the first and second solutions are both enhanced as are thermal boundary layer thicknesses. An increase in wall suction induces an escalation in the first solution for velocity whereas it reduces the second solution velocity. Stronger wall suction suppresses temperatures. With increasing thermal slip, the boundary layer is cooled i.e. temperature plummets and thermal boundary layer thickness is decreased. Strong deceleration is induced with greater hydrodynamic (velocity) slip. Both first and second solutions for skin friction are elevated with shrinking whereas they are depressed with stretching. With greater velocity slip both the first and second solutions for skin friction are depleted with greater velocity slip for the shrinking case, whereas they are generally enhanced for the very strong stretching case. The computations offer some new insights into multi-physical thermal fluid dynamics of nanofluid-based coating systems.