Site-directed Saturation Mutagenesis Research Articles

Development of an Engineered Sugar Aminotransferase with Simultaneously Improved Stability and Non-Natural Substrate Activity to Synthesize the Glucosidase Inhibitor Valienamine

Sugar aminotransferases (SATs) catalyze the installation of chiral amines onto specific keto sugars, producing bioactive amino sugars. Their activity has been utilized in artificial reactions, such as using the SAT WecE to transform valienone into the valuable α-glucosidase inhibitor valienamine. However, the low thermostability and limited activity on non-natural substrates have hindered their applications. Simultaneously improving stability and enzyme activity is particularly challenging owing to the acknowledged inherent trade-off between stability and activity. A customized combinatorial active-site saturation test-iterative saturation mutagenesis (CAST-ISM) strategy was used to simultaneously enhance the stability and activity of WecE toward valienone. Fourteen hotspots related to improving the stability-activity trade-off were identified based on evolutionary conservation and the average mutation folding energy assessment of 57 residues in the active site of WecE. Positive mutagenesis and combinatorial mutations of these specific residues were accomplished via site-directed saturation mutagenesis (SSM) and iterative evolution cycles. Compared with those of the wild-type (WT) WecE, the quadruple mutant M4 (Y321F/K209F/V318R/ F319V) displayed a 641.49-fold increase in half-life at 40 °C and a 31.37-fold increase in activity toward the non-natural substrate valienone. The triple mutant M3 (Y321F/K209F/V318R) demonstrated an 83.04-fold increase in half-life at 40 °C and a 37.77-fold increase in activity toward valienone. The underlying mechanism was dependent on the strengthened interface interactions and shortened transamination reaction catalytic distance, compared with those of the WT, which improved the stability and activity of the obtained mutants. Thus, we accomplished a general target-oriented strategy for obtaining stable and highly active SATs for artificial amino-sugar biosynthesis applications.

Identification of hyperthermophilic D-allulose 3-epimerase from Thermotoga sp. and its application as a high-performance biocatalyst for D-allulose synthesis.

D-Allulose 3-epimerase (DAE) is a vital biocatalyst for the industrial synthesis of D-allulose, an ultra-low calorie rare sugar. However, limited thermostability of DAEs hinders their use at high-temperature production. In this research, hyperthermophilic TI-DAE (Tm = 98.4 ± 0.7 ℃) from Thermotoga sp. was identified via in silico screening. A comparative study of the structure and function of site-directed saturation mutagenesis mutants pinpointed the residue I100 as pivotal in maintaining the high-temperature activity and thermostability of TI-DAE. Employing TI-DAE as a biocatalyst, D-allulose was produced from D-fructose with a conversion rate of 32.5%. Moreover, TI-DAE demonstrated excellent catalytic synergy with glucose isomerase CAGI, enabling the one-step conversion of D-glucose to D-allulose with a conversion rate of 21.6%. This study offers a promising resource for the enzyme engineering of DAEs and a high-performance biocatalyst for industrial D-allulose production.

Mutability landscape guided engineering of a promiscuous microbial glycosyltransferase for regioselective synthesis of salidroside and icariside D2

Microbial glycosyltransferases efficiently synthesize glucosides and have garnered increasing interest. However, limited regioselectivity has impeded their broad application, particularly in the pharmaceutical industry. In this study, the UDP-glycosyltransferase YjiC from Bacillus licheniformis (BlYjiC) was engineered to achieve the bidirectional regioselective glycosylation of tyrosol and its derivatives. Initially, site-directed saturation mutagenesis was performed on two newly identified substrate-binding cavities in the acceptor pocket of BlYjiC to provide a comprehensive blueprint of the interplay between mutations and function (mutability landscape). Iterative saturation mutagenesis was performed, guided by the mutability landscape. Two highly regioselective mutants M6 (M112L/I325Y/L70R/Q136E/I67E/M77R) and M2’ (M112D/I62L) were generated, exhibiting >99 % regioselectivity toward the alcoholic and phenolic hydroxyl of tyrosol, respectively, compared with the wild-type (product mixture: 51:49 %). Both mutants exhibited excellent regioselectivity toward several dihydroxy phenolic substrates, offering valuable biocatalysts for the regioselective synthesis of glucosides. Their application was confirmed in a short synthesis of salidroside (3.6 g/L) and icariside D2 (2.4 g/L), which exhibited near-perfect regioselectivity. This study provides valuable insights into future protein engineering of similar enzymes and opens new avenues for their practical applications.

Engineering amino acid residues of pentacyclic triterpene synthases for improving the activity

Pentacyclic triterpenoids exhibit a wide range of biological activities which have wide applications in the food, cosmetics, and pharmaceutical industries. High-performance chassis strains have been developed for the production of various pentacyclic triterpenoids, e.g., lupane-type and oleanane-type triterpenoids. The production of common pentacyclic triterpenes and their derivatives is limited by the poor activity of typical pentacyclic triterpene synthases (PTSs). However, a general strategy applicable to typical PTSs is still lacking. As typical pentacyclic triterpenes are derived from the baccharenyl cation, engineering the non-active-site residues in the MXXXXR motif might be beneficial for the catalytic efficiencies of typical PTSs by the stabilization of the baccharenyl cation. Here, we develop a general strategy for improving the activity of typical PTSs. As a proof of concept, the activity of three PTSs such as lupeol synthase, β-amyrin synthase, and α-amyrin synthases was significantly increased up to 7.3-fold by site-directed saturation mutagenesis. This strategy could be applied to improve the activity of various typical PTSs.Key points• The strategy could be applied to typical PTSs for improving the activity.• The catalytic activity of typical PTSs was significantly increased.

Characterization and mutagenesis of a high-activity and highly substrate-tolerant dipeptidase for L-carnosine biosynthesis via reversed hydrolysis

L-Carnosine (L-Car) is a biologically active dipeptide with antioxidant and anti-aging effects, formed by condensation of β-alanine (β-Ala) with L-histidine (L-His), which is used widely in the pharmaceutical and cosmetic industries. Here we report a dipeptide hydrolase originating from Bacillus megaterium, designated as BmPepD, whose synthetic activity reached 6.5 times that of SmPepD, which is the highest active dipeptidase reported so far for L-Car biosynthesis in vitro. By site-directed saturation mutagenesis, we obtained a significantly improved variant (T171N) of BmPepD. It showed a specific activity of 22.9 U mg−1protein, reaching 1.4 times that of wild-type BmPepD or 9.1 times that of SmPepD, which is the highest ever reported among this enzyme class. After optimizing the reaction conditions of variant BmPepDT171N, we performed the synthetic reaction of L-Car simply from the two free amino acids (0.2 M L-His and 6.5 M β-Ala), achieving a titer of 31.3 mM L-Car with a specific productivity of 283 gCar · gcatalyst−1. This work provides a highly active and substrate (β-alanine)-tolerant dipeptide hydrolase for the facile synthesis of dipeptide L-Car via reversed hydrolysis.

Efficient biosynthesis of Vibegron intermediate using a novel carbonyl reductase based on molecular modification of hydrogen bonding network regulation

Vibegron is a novel, potent, highly selective β3-adrenergic receptor agonist for the treatment of overactive bladder with higher therapeutic capacity and lower side effects. Methyl(2S,3R)-2-((tert-butoxycarbonyl)amino)-3-hydroxy-3-phenylpropanoate ((2S,3R)-aminohydroxy ester) is a key chiral intermediate for the synthesis of Vibegron. A novel carbonyl reductase from Exiguobacterium sp. s126 (EaSDR6) was isolated using data mining technology from GenBank database with preferable catalytic activity. Hydrogen bond network regulation was performed using site-directed saturation mutagenesis and combination mutagenesis. The mutant EaSDR6A138L/S193A was obtained with the activity improvement by 4.58 folds compared with the wild type EaSDR6. The Km of EaSDR6A138L/S193A was decreased from 1.57 mM to 0.67 mM, kcat was increased by 2.17 folds, and the overall catalytic efficiency kcat/Km was increased by 5.07 folds. The organic-aqueous biphasic bioreaction system for the asymmetric synthesis of (2S,3R)-aminohydroxy ester was constructed for the first time. Under the substrate concentration of 150 g/L, the yield of (2S,3R)-aminohydroxy ester was > 99.99%, the e.e. was > 99.99%, and the spatiotemporal yield was 1.55 g/(L·h·g DCW) after 12 h reaction. While the substrate concentration was increased to 200 g/L and the reaction lasted for 36 h, the yield of (2S,3R)-aminohydroxy ester was > 99.99%, the e.e. was > 99.99% and the spatiotemporal yield was 1.05 g/(L·h·g DCW). The substrate concentration and spatiotemporal yield were higher than ever reported.

Geometric Remodeling of Nitrilase Active Pocket Based on ALF-Scanning Strategy To Enhance Aromatic Nitrile Substrate Preference and Catalytic Efficiency.

Nitrilase can catalyze nitrile compounds to generate corresponding carboxylic acids. Nitrilases as promiscuous enzymes can catalyze a variety of nitrile substrates, such as aliphatic nitriles, aromatic nitriles, etc. However, researchers tend to prefer enzymes with high substrate specificity and high catalytic efficiency. In this study, we developed an active pocket remodeling (ALF-scanning) based on modulating the geometry of the nitrilase active pocket to alter substrate preference and improve catalytic efficiency. Using this strategy, combined with site-directed saturation mutagenesis, we successfully obtained 4 mutants with strong aromatic nitrile preference and high catalytic activity, W170G, V198L, M197F, and F202M, respectively. To explore the synergistic relationship of these 4 mutations, we constructed 6 double-combination mutants and 4 triple-combination mutants. By combining mutations, we obtained the synergistically enhanced mutant V198L/W170G, which has a significant preference for aromatic nitrile substrates. Compared with the wild type, its specific activities for 4 aromatic nitrile substrates are increased to 11.10-, 12.10-, 26.25-, and 2.55-fold, respectively. By mechanistic dissection, we found that V198L/W170G introduced a stronger substrate-residue π-alkyl interaction in the active pocket and obtained a larger substrate cavity (225.66 Å3 to 307.58 Å3), making aromatic nitrile substrates more accessible to be catalyzed by the active center. Finally, we conducted experiments to rationally design the substrate preference of 3 other nitrilases based on the substrate preference mechanism and also obtained the corresponding aromatic nitrile substrate preference mutants of these three nitrilases and these mutants with greatly improved catalytic efficiency. Notably, the substrate range of SmNit is widened. IMPORTANCE In this study, the active pocket was largely remodeled based on the ALF-scanning strategy we developed. It is believed that ALF-scanning not only could be employed for substrate preference modification but might also play a role in protein engineering of other enzymatic properties, such as substrate region selectivity and substrate spectrum. In addition, the mechanism of aromatic nitrile substrate adaptation we found is widely applicable to other nitrilases in nature. To a large extent, it could provide a theoretical basis for the rational design of other industrial enzymes.

High-throughput screening of spike variants uncovers the key residues that alter the affinity and antigenicity of SARS-CoV-2

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection has elicited a worldwide pandemic since late 2019. There has been ~675 million confirmed coronavirus disease 2019 (COVID-19) cases, leading to more than 6.8 million deaths as of March 1, 2023. Five SARS-CoV-2 variants of concern (VOCs) were tracked as they emerged and were subsequently characterized. However, it is still difficult to predict the next dominant variant due to the rapid evolution of its spike (S) glycoprotein, which affects the binding activity between cellular receptor angiotensin-converting enzyme 2 (ACE2) and blocks the presenting epitope from humoral monoclonal antibody (mAb) recognition. Here, we established a robust mammalian cell-surface-display platform to study the interactions of S-ACE2 and S-mAb on a large scale. A lentivirus library of S variants was generated via in silico chip synthesis followed by site-directed saturation mutagenesis, after which the enriched candidates were acquired through single-cell fluorescence sorting and analyzed by third-generation DNA sequencing technologies. The mutational landscape provides a blueprint for understanding the key residues of the S protein binding affinity to ACE2 and mAb evasion. It was found that S205F, Y453F, Q493A, Q493M, Q498H, Q498Y, N501F, and N501T showed a 3–12-fold increase in infectivity, of which Y453F, Q493A, and Q498Y exhibited at least a 10-fold resistance to mAbs REGN10933, LY-CoV555, and REGN10987, respectively. These methods for mammalian cells may assist in the precise control of SARS-CoV-2 in the future.

CRISPR/Cas9-assisted ssDNA recombineering for site-directed mutagenesis and saturation mutagenesis of plasmid-encoded genes

Site-directed and saturation mutagenesis are critical DNA methodologies for studying protein structure and function. For plasmid-based gene mutation, PCR and overlap-extension PCR involve tedious cloning steps. When the plasmid size is large, PCR yield may be too low for cloning; and for saturation mutagenesis of a single codon, one experiment may not enough to generate all twenty coding variants. Oligo-mediated recombineering sidesteps the complicated cloning process by homologous recombination between a mutagenic oligo and its target site. However, the low recombineering efficiency and inability to select for the recombinant makes it necessary to screen a large number of clones. Herein, we describe two plasmid-based mutagenic strategies: CRISPR/Cas9-assisted ssDNA recombineering for site-directed mutagenesis (CRM) and saturation mutagenesis (CRSM). CRM and CRSM involve co-electroporation of target plasmid, sgRNA expression plasmid and mutagenic oligonucleotide into Escherichia coli cells with induced expression of λ-Red recombinase and Cas9, followed by plasmid extraction and characterization. We established CRM and CRSM via ampicillin resistance gene repair and mutagenesis of N-acetyl‑D‑neuraminic acid aldolase. The mutational efficiency was between 80 and 100% and all twenty amino acid coding variants were obtained at a target site via a single CRSM strategy. CRM and CRSM have the potential to be general plasmid-based gene mutagenesis tools.

Cry41-Related Mutants against Myzus persicae Based on Its Interaction with Cathepsin B

Cry toxins produced by Bacillus thuringiensis (Bt) are toxic to Lepidoptera, Coleoptera, and Diptera, but display very low activity against aphids. Recently, Cry41-related toxin was found to show moderate toxicity against Myzus persicae with the 50% lethal concentration (LC50) of 32.7 μg/mL, and its mode of action was proposed to be the acceleration of the apoptosis of aphid cells by enhancing Cathepsin B activity. This study focused on constructing Cry41-related mutants against M. persicae based on its interaction with Cathepsin B. First, eight key interacting residues in Cry41-related toxin were identified using alanine scanning and site-directed saturation mutagenesis. Subsequently, the positive mutant Cry41-7M protein (mutations of Gly48, Ile59, Lys364, Gln367, Gln377, Tyr378, and Ser400 to Tyr, Ala, Arg, Lys, Lys, Lys, and Ala in Cry41-related toxin, respectively) and the negative mutant Cry41-6A protein (mutations of Gly48, Lys364, Gln367, Gln377, and Tyr378 to Ala and mutation of Pro453 to Glu in Cry41-related toxin) were constructed, expressed, and purified. We then found that Cry41-7M protein performed slightly stronger than Cry41-related toxin in enhancing the enzymatic activity of Cathepsin B, whereas Cry41-6A protein did not affect Cathepsin B activity. A further bioassay showed that the mortality caused by Cry41-7M protein (LC50 = 19.144 μg/mL) was marginally higher than that of Cry41-related toxin, while Cry41-6A protein caused a decreased mortality (LC50 = 42.478 μg/mL). These results are expected to open new avenues for improving Cry aphidicidal activity.

Amino Acid Substitutions at P1 Position Change the Inhibitory Activity and Specificity of Protease Inhibitors BmSPI38 and BmSPI39 from Bombyx mori

It was found that silkworm serine protease inhibitors BmSPI38 and BmSPI39 were very different from typical TIL-type protease inhibitors in sequence, structure, and activity. BmSPI38 and BmSPI39 with unique structure and activity may be good models for studying the relationship between the structure and function of small-molecule TIL-type protease inhibitors. In this study, site-directed saturation mutagenesis at the P1 position was conducted to investigate the effect of P1 sites on the inhibitory activity and specificity of BmSPI38 and BmSPI39. In-gel activity staining and protease inhibition experiments confirmed that BmSPI38 and BmSPI39 could strongly inhibit elastase activity. Almost all mutant proteins of BmSPI38 and BmSPI39 retained the inhibitory activities against subtilisin and elastase, but the replacement of P1 residues greatly affected their intrinsic inhibitory activities. Overall, the substitution of Gly54 in BmSPI38 and Ala56 in BmSPI39 with Gln, Ser, or Thr was able to significantly enhance their inhibitory activities against subtilisin and elastase. However, replacing P1 residues in BmSPI38 and BmSPI39 with Ile, Trp, Pro, or Val could seriously weaken their inhibitory activity against subtilisin and elastase. The replacement of P1 residues with Arg or Lys not only reduced the intrinsic activities of BmSPI38 and BmSPI39, but also resulted in the acquisition of stronger trypsin inhibitory activities and weaker chymotrypsin inhibitory activities. The activity staining results showed that BmSPI38(G54K), BmSPI39(A56R), and BmSPI39(A56K) had extremely high acid-base and thermal stability. In conclusion, this study not only confirmed that BmSPI38 and BmSPI39 had strong elastase inhibitory activity, but also confirmed that P1 residue replacement could change their activity and inhibitory specificity. This not only provides a new perspective and idea for the exploitation and utilization of BmSPI38 and BmSPI39 in biomedicine and pest control, but also provides a basis or reference for the activity and specificity modification of TIL-type protease inhibitors.

R97 at "Handlebar" Binding Mode in Active Pocket Plays an Important Role in Fe(II)/α-Ketoglutaric Acid-Dependent Dioxygenase cis-P3H-Mediated Selective Synthesis of (2S,3R)-3-Hydroxypipecolic Acid.

Pipecolic acid (Pip) and its derivative hydroxypipecolic acids, such as (2S,3R)-3-hydroxypipecolic acid (cis-3-L-HyPip), are components of many natural and synthetic bioactive molecules. Fe(II)/α-ketoglutaric acid (Fe(II)/2-OG)-dependent dioxygenases can catalyze the hydroxylation of pipecolic acid. However, the available enzymes with desired activity and selectivity are limited. Herein, we compare the possible candidates in the Fe(II)/2-OG-dependent dioxygenase family, and cis-P3H is selected for potentially catalyzing selective hydroxylation of L-Pip. cis-P3H was further engineered to increase its catalytic efficiency toward L-Pip. By analyzing the structural confirmation and residue composition in substrate-binding pocket, a "handlebar" mode of molecular interactions is proposed. Using molecular docking, virtual mutation analysis, and dynamic simulations, R97, E112, L57, and G282 were identified as the key residues for subsequent site-directed saturation mutagenesis of cis-P3H. Consequently, the variant R97M showed an increased catalytic efficiency toward L-Pip. In this study, the kcat/Km value of the positive mutant R97M was about 1.83-fold that of the wild type. The mutation R97M would break the salt bridge between R97 and L-Pip and weaken the positive-positive interaction between R97 and R95. Therefore, the force on the amino and carboxyl groups of L-Pip was lightly balanced, allowing the molecule to be stabilized in the active pocket. These results provide a potential way of improving cis-P3H catalytic activity through rational protein engineering.

Improving the activity and expression level of a phthalate-degrading enzyme by a combination of mutagenesis strategies and strong promoter replacement.

Phthalic acid esters (PAEs) are widely used plasticizers found in consumer products, which enter the environment and pose severe threats to human health. Here, a new PAE-degrading enzyme EstJ6 was modified by combining mutagenesis strategies and a strong promoter replacement to improve its catalytic activity and expression level. Four mutants with enhanced activity were obtained by random mutation, among which EstJ6M1.1 exhibited the highest catalytic activity with an increase in catalytic activity by 2.9-fold toward dibutyl phthalate (DBP) than that of the wild-type (WT) enzyme. With these mutants as a template, a variant EstJ6M2 with 3.1-fold higher catalytic activity and 4.61 times higher catalytic efficiency (Kcat/Km) was identified by staggered extension PCR. Targeting four mutation sites of EstJ6M2, a variant EstJ6M3.1 was gained by site-directed saturation mutagenesis and displayed 4.3-fold higher activity and 5.97 times higher Kcat/Km than WT. The expression level of three mutants EstJ6M1.1, EstJ6M2, and EstJ6M3.1, as well as the WT, increased nearly threefold after a strong promoter replacement. These results provide a proof-theoretical basis and practicable pipeline for applying PAE-degrading enzymes.

Structure of an Alkaline Pectate Lyase and Rational Engineering with Improved Thermo-Alkaline Stability for Efficient Ramie Degumming.

Alkaline pectate lyases have biotechnological applications in plant fiber processing, such as ramie degumming. Previously, we characterized an alkaline pectate lyase from Bacillus clausii S10, named BacPelA, which showed potential for enzymatic ramie degumming because of its high cleavage activity toward methylated pectins in alkaline conditions. However, BacPelA displayed poor thermo-alkaline stability. Here, we report the 1.78 Å resolution crystal structure of BacPelA in apo form. The enzyme has the characteristic right-handed β-helix fold of members of the polysaccharide lyase 1 family and shows overall structural similarity to them, but it displays some differences in the details of the secondary structure and Ca2+-binding site. On the basis of the structure, 10 sites located in flexible regions and showing high B-factor and positive ΔTm values were selected for mutation, aiming to improve the thermo-alkaline stability of the enzyme. Following site-directed saturation mutagenesis and screening, mutants A238C, R150G, and R216H showed an increase in the T5015 value at pH 10.0 of 3.0 °C, 6.5 °C, and 7.0 °C, respectively, compared with the wild-type enzyme, interestingly accompanied by a 24.5%, 46.6%, and 61.9% increase in activity. The combined mutant R150G/R216H/A238C showed an 8.5 °C increase in the T5015 value at pH 10.0, and an 86.1% increase in the specific activity at 60 °C, with approximately doubled catalytic efficiency, compared with the wild-type enzyme. Moreover, this mutant retained 86.2% activity after incubation in ramie degumming conditions (4 h, 60 °C, pH 10.0), compared with only 3.4% for wild-type BacPelA. The combined mutant increased the weight loss of ramie fibers in degumming by 30.2% compared with wild-type BacPelA. This work provides a thermo-alkaline stable, highly active pectate lyase with great potential for application in the textile industry, and also illustrates an effective strategy for rational design and improvement of pectate lyases.

Enhanced Thermostability and Molecular Insights for l-Asparaginase from Bacillus licheniformis via Structure- and Computation-Based Rational Design.

l-Asparaginase has gained much attention for effectively treating acute lymphoblastic leukemia (ALL) and mitigating carcinogenic acrylamide in fried foods. Due to high-dose dependence for clinical treatment and low mitigation efficiency for thermal food processes caused by poor thermal stability, a method to achieve thermostable l-asparaginase has become a critical bottleneck. In this study, a rational design including free energy combined with structural and conservative analyses was applied to engineer the thermostability of l-asparaginase from Bacillus licheniformis (BlAsnase). Two enhanced thermostability mutants D172W and E207A were screened out by site-directed saturation mutagenesis. The double mutant D172W/E207A exhibited highly remarkable thermostability with a 65.8-fold longer half-life at 55 °C and 5 °C higher optimum reaction temperature and melting temperature (Tm) than those of wild-type BlAsnase. Further, secondary structure, sequence, molecular dynamics (MD), and 3D-structure analysis revealed that the excellent thermostability of the mutant D172W/E207A was on account of increased hydrophobicity and decreased flexibility, highly rigid structure, hydrophobic interactions, and favorable electrostatic potential. As the first report of rationally designing l-asparaginase with improved thermostability from B. licheniformis, this study offers a facile and efficient process to improve the thermostability of l-asparaginase for industrial applications.

Molecular Evolution of an Aminotransferase Based on Substrate–Enzyme Binding Energy Analysis for Efficient Valienamine Synthesis

Valienamine is a valuable building block for active pharmaceuticals and agrochemicals because of its aminocyclitol structure and glucosidase inhibitory activity. Straightforward amino chiral center construction on valienone using a sugar aminotransferase (SAT) to produce valienamine achieved strict stereo-specificity; however, low transamination activity owing to an unfavorable binding conformation of the non-natural substrate valienone in the oversized substrate-binding pocket currently limits SAT-based valienamine production. Here, we employed a tailored combinatorial active-site saturation test/iterative saturation mutagenesis (CAST/ISM) strategy to engineer a recently identified SAT (RffA_Kpn) to optimize the binding of valienone in the large binding pocket and thus improve transamination activity. In silico analyses predicting mutation binding energies and assessing evolutionary conservation identified 9 of 62 contact residues positioned within 8 Å of the valienone–PMP external aldimine transition state as hotspots for destabilizing unfavorable binding. Four of these residues were subsequently confirmed to improve activity using site-directed saturation mutagenesis, and combinatorial mutations were prepared in further iterative cycles. The quadruple mutant M4 (K209W/Y321F/V318Q/K25W) displayed a 35.59-fold improvement in valienamine synthesis activity over wild-type RffA_Kpn and achieved 12.18% conversion toward valienone in 100 mg preparative-scale reaction. Our demonstration of asymmetric biosynthesis for a valuable chiral aminocyclitol illustrates how an evolution model can help engineer enzymes that handle small, non-natural substrates in oversized binding pockets.

Enhanced Thermal Stability of Polyphosphate-Dependent Glucomannokinase by Directed Evolution

Polyphosphate-dependent glucomannokinase (PPGMK) is able to utilize inorganic polyphosphate to synthesize mannose-6-phosphate (M6P) instead of highly costly ATP. This enzyme was modified and designed by combining error-prone PCR (EP-PCR) and site-directed saturation mutagenesis. Two mutants, H92L/A138V and E119V, were screened out from the random mutation library, and we used site-specific saturation mutations to find the optimal amino acid at each site. Finally, we found the optimal combination mutant, H92K/E119R. The thermal stability of H92K/E119R increased by 5.4 times at 50 °C, and the half-life at 50 °C increased to 243 min. Moreover, the enzyme activity of H92K/E119R increased to 16.6 U/mg, and its enzyme activity is twice that of WT. We analyzed the structure of the mutant using molecular dynamics simulation. We found that the shortening of the hydrogen bond distance and the formation of salt bridges can firmly connect the α-helix and β-sheet and improve the stability of the PPGMK structure.

Focused mutagenesis in non-catalytic cavity for improving catalytic efficiency of 3-ketosteroid-Δ1-dehydrogenase

Non-catalytic sites are commonly present in many enzymes, but how to classify and modulate such sites for activity improvement is not well-explored. Herein a non-catalytic cavity in the 3-ketosteroid-Δ1-dehydrogenase (Δ1-KstD) from Mycobacterium smegmatis (MsKstD1), which could competitively bind to substrate to form non-catalytic complex, was predicted next to substrate tunnel by the CAVER/molecular dynamics. Based on that, a rational design was performed by Focused Site-directed Iterative Saturation Mutagenesis (FSISM) for blocking the non-catalytic cavity to enhance substrate enter active site to improve the Δ1-dehydrogenation activity of MsKstD1. We obtained the best quadruple mutant (H132M\\L113F\\V419W\\M51L) with 10-fold higher specific activity toward hydrocortisone than that of wild type enzyme. The Δ1-dehydrogenation space time yield toward hydrocortisone reached 36.0 g/L/h to produce prednisolone. This work displays how to combine focused mutagenesis with computational analysis to effectively identify and modify non-catalytic cavity to enhance enzyme activity for efficient production of Δ1-3-ketosteroid.

An enzymatic colorimetric whole-cell biosensor for high-throughput identification of lysine overproducers

L-lysine is a crucial nutrient for both humans and animals, and its main commercial use is as a supplement in animal feed to promote chicken and other animal growth. Fluorescence biosensors based on the transcriptional regulator have been developed for high-throughput screening of L-lysine producers. However, due to its inability to specifically detect lysine, this fluorescent biosensor cannot be employed to screen high-yielding strains. Here, we present a novel technique for observing L-lysine concentrations within individual Corynebacterium glutamicum cells. The transcriptional regulator LysG and its binding site, as well as the phytoene desaturase that catalyzes the synthesis of the red pigment, make up the functional core of the biosensor. The lysine-sensitive mutant LysG(E123Y, E125A), which improved the sensitivity of biosensors, was generated by site-directed saturation mutagenesis. In addition, we increased the lysine-induced chromogenic biosensor response to 320 mM by optimizing the L-lysine export mechanism and the pathway for the synthesis of lycopene precursors. The direct identification of producers with elevated L-lysine accumulation is thus made straightforward by colorimetric screening. Lys-8, a lysine producer with a maximum lysine titer of 316.2 mM, was sorted out based on the biosensor. The enzymatic colorimetric biosensor constructed here is a simple tool with great potential for the development of high-level lysine-producing C. glutamicum.

Novel Detection Method for Evaluating the Activity of an Alkaline Serine Protease from Bacillus clausii.

Until now, the detection methods for serine proteases have been quite time-consuming or cannot indicate the "real" protease activity. Here, a rapid and simple method for determining the "real" activity of serine proteases toward AAPX (a kind of mixed polypeptide substrates, with X representing 20 standard amino acids) was developed. This AAPX method has high reliability, sensitivity, and repeatability and can be used for detecting the serine protease activity spectrophotometrically. Additionally, the site-directed saturation mutagenesis library of alkaline serine protease PRO (BcPRO) from Bacillus clausii was screened with this AAPX method. Three beneficial mutants S99R, S99H, and S99W were identified, and S99W displayed the highest activity. In comparison to wild-type BcPRO, S99W exhibited enhanced catalytic performance toward eight AAPX monomers, and the molecular dynamics simulation revealed the mechanism responsible for its improved activity toward AAPM. Consequently, this work provides an efficient method for detecting, characterizing, mining, and high-throughput screening of serine proteases.