Sintered Research Articles

Nitriding of sintered iron at 920 °C in nitrogen-ammonia atmosphere: A.Salek et al. (Ustav Materialoveho Vyskumu SAV, Kosice, Slovakia.) Pokroky Praskove Metal., vol 35, no 3, 1997. 32–41. (In Czech.)

Nitriding of sintered iron at 920 °C in nitrogen-ammonia atmosphere: A.Salek et al. (Ustav Materialoveho Vyskumu SAV, Kosice, Slovakia.) Pokroky Praskove Metal., vol 35, no 3, 1997. 32–41. (In Czech.)

Effect of Organic Additives on Cadmium Electrode in Nickel-Cadmium Batteries

The effect of some organic additives on the capacity performance of pressed pellet and sintered plate type cadmium electrodes has been studied. The additives under investigation are benzimidazole and polyvinyl alcohol. The organic electrode additives for the cadmium electrode of the nickel-cadmium battery is aimed mainly for increasing the discharge capacity and minimising the self discharge. It is found that pressed electrode can be used for low rates of discharge whereas the sintered electrodes can be used for both low and high rates of discharge. It is found that pressed electrode can be used for low rates of discharge whereas the sintered electrodes can be used for both low and high rates of discharge. The organic additive sources show better low and high rate performance for sintered cadmium electrodes.

5443975 Method of binding enzymes to sintered expanded clays : Cervelli Stefano; Capuano Vincenzo Pisa, Italy assigned to Ente Per Le Nuove Technologie L'Energia E L'Ambiente (Enea); Consiglio Nazionale Delle Ricerc

5443975 Method of binding enzymes to sintered expanded clays : Cervelli Stefano; Capuano Vincenzo Pisa, Italy assigned to Ente Per Le Nuove Technologie L'Energia E L'Ambiente (Enea); Consiglio Nazionale Delle Ricerc

炭素焼結体の被削性(第4報)

炭素焼結体の被削性(第4報)

J_c(77.3 K, 20 T)=2×l0~4 A/cm~2 Achieved in Bulk High T_c Superconducting Material

Since the discovery of high T_c oxide superconductor, scientists and engineers aredeeply concerned with the possibility of its application to the electric machine withstrong operating current at high magnetic fields. Because of the serious problem ofweak link in the sintered bulk materials processed by regular ceramic powder technolo-gy, the critical current density at 77.3 K is low and it gets much lower with theincreasing magnetic field. Scientists look forward to heighening J_c of the high T_c ma-

Mechanical Properties of Sintered Atomized Iron Alloy Powder Premixes Containing Phosphorus

Premelanges des poudres PASC45 et PASC60 contenant 0,45 et 0,6% de P fournies par Hoganos AG (Suede) avec des additions de 1 a 4% en poids de Cu, Ni ou Mo, comprimes sous une pression de 691 MPa et frittes a 1120 C pendant 30 min dans une atmosphere d'ammoniac dissocie. Tous les elements d'addition augmentent la limite elastique et la resistance a la rupture, mais diminuent la ductilite

Strength and Intergranular Fracture of Sintered Carbonyl Iron in Fatigue Test

La resistance a la fatigue de comprimes de fer carbonyle entre 1073 K et 1423 K est plus elevee dans le domaine de la ferrite que dans le domaine de l'austenite. La resistance d'echantillons subissant un frittage isotherme a 1123 K et 1423 K augmente en general avec la duree du frittage

アルミニウム焼結体の陽極酸化

アルミニウム焼結体の陽極酸化

Standardization of sintered bearing materials

Standardization of sintered bearing materials

Gas Sulfiding on Sintered Steels

A series of the studies on gas sulfiding for the various sintered steels have been made and some vital phenomena obtained are:1) A suitable temperature range of the sulfiding is found to be between 300-450°C in the case of Fe-0.8%C alloys, and above this temperature, not only the quantity of iron-sulfide Fe1-xS formed in the pores begins to decrease, but also the films of iron-sulfide located on the surface of sintered steels have a tendency to peel off.2) The quantity of iron-sulfide formed in the pores increases with lowering the density, but the sulfiding time has not large effect on the quantity.3) The addition of copper to the sintered steels lowers each suitable temperature range of the sulfiding by 50-100°C and additionally, CuFeS2 films are observed besides the iron-sulfide Fe1-xS.4) The depth of each sulfide layer formed in the pore of the sintered steels becomes small with decreasing H2S gas 'ratio, elevating the sulfiding temperature, increasing the density of the sintered steels and adding copper to the sintered steels.

Light Machining of Sintered Iron Compact

Light Machining of Sintered Iron Compact

Nitrotitanizing of sintered iron articles

Nitrotitanizing of sintered iron articles

Broadening in the rolling of sintered strip. Part 2

Broadening in the rolling of sintered strip. Part 2

The Lipid Composition of a Species of Alternaria of the “Alternaria Alternata Group”

(1973). The Lipid Composition of a Species of Alternaria of the “Alternaria Alternata Group”. Mycologia: Vol. 65, No. 4, pp. 958-963.

Effects of Mo and Ni on Toughness of Sintered Iron

Effects of Mo and Ni on Toughness of Sintered Iron