The first documented evidence of splinting teeth to stabilize mandibular fractures dates back to the Greco–Roman period. Bridle wires then, were made of gold/linen threads.[1] The original technique as described by Hippocrates involved placement of a single wire around the teeth adjacent to the fracture, which is followed till date. The technique is a temporary ' first aid' measure aimed at stabilizing the fracture ends by passing a circumdental pre-stretched 26 gauge wire around the necks of one or two teeth on either side of the fracture. Maintaining manual reduction at the alveolus level, the wire ends are twisted and tightened in a clockwise manner to attain stability. This helps alleviate pain due to fracture movement, gives support and protects from further soft tissue damage and muscle cramping.[2] It helps assist in open reduction and internal fixation (ORIF) of mandible fractures by holding the fracture in a reduced position during fixation.[3] Clinically, loosening of the single bridle wires is often noted and can lead to errors in fixation or patient discomfort due to fracture mobility. A double bridle wire technique can provide better stability and maintenance in the reduced position for mandibular fractures. Similar to a single circumdental wire, two wires are passed around one or two teeth adjacent to the fracture site. The operator while maintaining reduction with one hand, tightens one of the wires by pulling it to one direction away from fracture end (similar to a single wire technique). Subsequently, he pulls and tightens the other wire in the opposite direction, again away from the fracture site. Both the wires are equally tightened to maintain minimum force on the fracture site. After equal tightening of both the bridle/tie wires, the twisted ends are cut and turned clockwise to form a small loop so that the buccal gingiva is not damaged [Figures 1 and 2].Figure 1: Fracture before reductionFigure 2: Fracture stabilized with double bridle wiresIn single mandibular fractures this technique can help reinforce stability of the reduction and can sometimes eliminate the need for arch bars. Financial support and sponsorship Nil. Conflicts of interest There are no conflicts of interest.