Single-wavelength Anomalous Dispersion Research Articles

De novo crystal structure determination of double stranded RNA binding domain using only the sulfur anomalous diffraction in SAD phasing.

Single-wavelength anomalous dispersion (SAD)-phasing using sulfur as the unique anomalous scatterer is a powerful method to solve the phase problem in protein crystallography. However, it is not yet widely used by non-expert crystallographers. We report here the structure determination of the double stranded RNA binding domain of human dihydrouridine synthase using the sulfur-SAD method and highly redundant data collected at 1.8 ​Å (“off-edge”), at which the estimated overall anomalous signal was 1.08%. High multiplicity data were collected on a single crystal rotated along the ϕ or ω axis at different κ angles, with the primary beam intensity being attenuated from 50% to 95%, compared to data collection at 0.98 ​Å, to reduce radiation damage. SHELXD succeeded to locate 14 out 15 sulfur sites only using the data sets recorded with highest beam attenuation, which provided phases sufficient for structure solving. In an attempt to stimulate the use of sulfur-SAD phasing by a broader community of crystallographers, we describe our experimental strategy together with a compilation of previous successful cases, suggesting that sulfur-SAD phasing should be attempted for determining the de novo structure of any protein with average sulfur content diffracting better than 3 ​Å resolution.

Structural basis for the hydrolytic dehalogenation of the fungicide chlorothalonil

Cleavage of aromatic carbon-chlorine bonds is critical for the degradation of toxic industrial compounds. Here, we solved the X-ray crystal structure of chlorothalonil dehalogenase (Chd) from Pseudomonas sp. CTN-3, with 15 of its N-terminal residues truncated (ChdT), using single-wavelength anomalous dispersion refined to 1.96 Å resolution. Chd has low sequence identity (<15%) compared with all other proteins whose structures are currently available, and to the best of our knowledge, we present the first structure of a Zn(II)-dependent aromatic dehalogenase that does not require a coenzyme. ChdT forms a "head-to-tail" homodimer, formed between two α-helices from each monomer, with three Zn(II)-binding sites, two of which occupy the active sites, whereas the third anchors a structural site at the homodimer interface. The catalytic Zn(II) ions are solvent-accessible via a large hydrophobic (8.5 × 17.8 Å) opening to bulk solvent and two hydrophilic branched channels. Each active-site Zn(II) ion resides in a distorted trigonal bipyramid geometry with His117, His257, Asp116, Asn216, and a water/hydroxide as ligands. A conserved His residue, His114, is hydrogen-bonded to the Zn(II)-bound water/hydroxide and likely functions as the general acid-base. We examined substrate binding by docking chlorothalonil (2,4,5,6-tetrachloroisophtalonitrile, TPN) into the hydrophobic channel and observed that the most energetically favorable pose includes a TPN orientation that coordinates to the active-site Zn(II) ions via a CN and that maximizes a π-π interaction with Trp227 On the basis of these results, along with previously reported kinetics data, we propose a refined catalytic mechanism for Chd-mediated TPN dehalogenation.

Native de novo structural determinations of non-canonical nucleic acid motifs by X-ray crystallography at long wavelengths

Obtaining phase information remains a formidable challenge for nucleic acid structure determination. The introduction of an X-ray synchrotron beamline designed to be tunable to long wavelengths at Diamond Light Source has opened the possibility to native de novo structure determinations by the use of intrinsic scattering elements. This provides opportunities to overcome the limitations of introducing modifying nucleotides, often required to derive phasing information. In this paper, we build on established methods to generate new tools for nucleic acid structure determinations. We report on the use of (i) native intrinsic potassium single-wavelength anomalous dispersion methods (K-SAD), (ii) use of anomalous scattering elements integral to the crystallization buffer (extrinsic cobalt and intrinsic potassium ions), (iii) extrinsic bromine and intrinsic phosphorus SAD to solve complex nucleic acid structures. Using the reported methods we solved the structures of (i) Pseudorabies virus (PRV) RNA G-quadruplex and ligand complex, (ii) PRV DNA G-quadruplex, and (iii) an i-motif of human telomeric sequence. Our results highlight the utility of using intrinsic scattering as a pathway to solve and determine non-canonical nucleic acid motifs and reveal the variability of topology, influence of ligand binding, and glycosidic angle rearrangements seen between RNA and DNA G-quadruplexes of the same sequence.

The predictive power of data-processing statistics.

This study describes a method to estimate the likelihood of success in determining a macromolecular structure by X-ray crystallography and experimental single-wavelength anomalous dispersion (SAD) or multiple-wavelength anomalous dispersion (MAD) phasing based on initial data-processing statistics and sample crystal properties. Such a predictive tool can rapidly assess the usefulness of data and guide the collection of an optimal data set. The increase in data rates from modern macromolecular crystallography beamlines, together with a demand from users for real-time feedback, has led to pressure on computational resources and a need for smarter data handling. Statistical and machine-learning methods have been applied to construct a classifier that displays 95% accuracy for training and testing data sets compiled from 440 solved structures. Applying this classifier to new data achieved 79% accuracy. These scores already provide clear guidance as to the effective use of computing resources and offer a starting point for a personalized data-collection assistant.

A Novel Substrate-Binding Site in the X-ray Structure of an Oxidized E. coli Glyceraldehyde 3-Phosphate Dehydrogenase Elucidated by Single-Wavelength Anomalous Dispersion

Escherichia coli (E. coli), one of the most frequently used host for the expression of recombinant proteins, is often affected by the toxic effect of the exogenous proteins that is required to express. Glyceraldehyde 3-phosphate dehydrogenase (GAPDH) is a multi-functional protein that has been used as a control marker for basal function and it is known to undergo cysteine oxidation under different types of cellular stress. Here, we report the 3D structure of the endogenous GAPDH purified from stressed E. coli cells expressing a eukaryotic protein. The structure was solved at 1.64 Å using single-wavelength anomalous dispersion (SAD) phasing with a selenium-modified enzyme. Interestingly, each GAPDH monomer contains a molecule of glyceraldehyde-3 phosphate in a non-previously identified site. Furthermore, the catalytic Cys149 is covalently attached to a ~300 Da molecule, possibly glutathione. This modification alters the conformation of an adjacent alpha helix in the catalytic domain, right opposite to the NAD+ binding site. The conformation of the alpha helix is stabilized after soaking the crystals with NAD+. These results exemplify the effects that the overexpression of an exogenous protein has over the host proteins and sheds light on the structural changes that large oxidant molecules on the catalytic cysteine produce for the GAPDH enzyme.

Crystal structure of the putative cyclase IdmH from the indanomycin nonribosomal peptide synthase/polyketide synthase.

Indanomycin is biosynthesized by a hybrid nonribosomal peptide synthase/polyketide synthase (NRPS/PKS) followed by a number of 'tailoring' steps to form the two ring systems that are present in the mature product. It had previously been hypothesized that the indane ring of indanomycin was formed by the action of IdmH using a Diels-Alder reaction. Here, the crystal structure of a selenomethionine-labelled truncated form of IdmH (IdmH-Δ99-107) was solved using single-wavelength anomalous dispersion (SAD) phasing. This truncated variant allows consistent and easy crystallization, but importantly the structure was used as a search model in molecular replacement, allowing the full-length IdmH structure to be determined to 2.7 Å resolution. IdmH is a homodimer, with the individual protomers consisting of an α+β barrel. Each protomer contains a deep hydrophobic pocket which is proposed to constitute the active site of the enzyme. To investigate the reaction catalysed by IdmH, 88% of the backbone NMR resonances were assigned, and using chemical shift perturbation of [15N]-labelled IdmH it was demonstrated that indanomycin binds in the active-site pocket. Finally, combined quantum mechanical/molecular mechanical (QM/MM) modelling of the IdmH reaction shows that the active site of the enzyme provides an appropriate environment to promote indane-ring formation, supporting the assignment of IdmH as the key Diels-Alderase catalysing the final step in the biosynthesis of indanomycin through a similar mechanism to other recently characterized Diels-Alderases involved in polyketide-tailoring reactions. An animated Interactive 3D Complement (I3DC) is available in Proteopedia at https://proteopedia.org/w/Journal:IUCrJ:S2052252519012399.

Solving the structure of Lgl2, a difficult blind test of unsupervised structure determination

In the companion paper by Ufimtsev and Levitt [Ufimtsev IS, Levitt M (2019) Proc Natl Acad Sci USA, 10.1073/pnas.1821512116], we presented a method for unsupervised solution of protein crystal structures and demonstrated its utility by solving several test cases of known structure in the 2.9- to 3.45-Å resolution range. Here we apply this method to solve the crystal structure of a 966-amino acid construct of human lethal giant larvae protein (Lgl2) that resisted years of structure determination efforts, at 3.2-Å resolution. The structure was determined starting with a molecular replacement (MR) model identified by unsupervised refinement of a pool of 50 candidate MR models. This initial model had 2.8-Å RMSD from the solution. The solved structure was validated by comparison with a model subsequently derived from an alternative crystal form diffracting to higher resolution. This model could phase an anomalous difference Fourier map from an Hg derivative, and a single-wavelength anomalous dispersion phased density map made from these sites aligned with the refined structure.

Phasing with calcium at home.

With better tools for data processing and with synchrotron beamlines that are capable of collecting data at longer wavelengths, sulfur-based native single-wavelength anomalous dispersion (SAD) phasing has become the `first-choice' method for de novo protein structure determination. However, for many proteins native SAD phasing can be simplified by taking advantage of their interactions with natural metal cofactors that are stronger anomalous scatterers than sulfur. This is demonstrated here for four unique domains of a 1.5 MDa calcium-dependent adhesion protein using the anomalous diffraction of the chelated calcium ions. In all cases, low anomalous multiplicity X-ray data were collected on a home-source diffractometer equipped with a chromium rotating anode (λ = 2.2909 Å). In all but one case, calcium SAD phasing alone was sufficient to allow automated model building and refinement of the protein model after the calcium substructure had been determined. Given that Ca atoms will be present in a significant percentage of proteins that remain uncharacterized, many aspects of the data-collection and processing methods described here could be broadly applied for routine de novo structure elucidation.

Long-wavelength native-SAD phasing: opportunities and challenges.

Native single-wavelength anomalous dispersion (SAD) is an attractive experimental phasing technique as it exploits weak anomalous signals from intrinsic light scatterers (Z < 20). The anomalous signal of sulfur in particular, is enhanced at long wavelengths, however the absorption of diffracted X-rays owing to the crystal, the sample support and air affects the recorded intensities. Thereby, the optimal measurable anomalous signals primarily depend on the counterplay of the absorption and the anomalous scattering factor at a given X-ray wavelength. Here, the benefit of using a wavelength of 2.7 over 1.9 Å is demonstrated for native-SAD phasing on a 266 kDa multiprotein-ligand tubulin complex (T2R-TTL) and is applied in the structure determination of an 86 kDa helicase Sen1 protein at beamline BL-1A of the KEK Photon Factory, Japan. Furthermore, X-ray absorption at long wavelengths was controlled by shaping a lysozyme crystal into spheres of defined thicknesses using a deep-UV laser, and a systematic comparison between wavelengths of 2.7 and 3.3 Å is reported for native SAD. The potential of laser-shaping technology and other challenges for an optimized native-SAD experiment at wavelengths >3 Å are discussed.

Making routine native SAD a reality: lessons from beamline X06DA at the Swiss Light Source.

Native single-wavelength anomalous dispersion (SAD) is the most attractive de novo phasing method in macromolecular crystallography, as it directly utilizes intrinsic anomalous scattering from native crystals. However, the success of such an experiment depends on accurate measurements of the reflection intensities and therefore on careful data-collection protocols. Here, the low-dose, multiple-orientation data-collection protocol for native SAD phasing developed at beamline X06DA (PXIII) at the Swiss Light Source is reviewed, and its usage over the last four years on conventional crystals (>50 µm) is reported. Being experimentally very simple and fast, this method has gained popularity and has delivered 45 de novo structures to date (13 of which have been published). Native SAD is currently the primary choice for experimental phasing among X06DA users. The method can address challenging cases: here, native SAD phasing performed on a streptavidin-biotin crystal with P21 symmetry and a low Bijvoet ratio of 0.6% is highlighted. The use of intrinsic anomalous signals as sequence markers for model building and the assignment of ions is also briefly described.

In-house high-energy-remote SAD phasing using the magic triangle: how to tackle the P1 low symmetry using multiple orientations of the same crystal of human IBA57 to increase the multiplicity.

This article describes the approach used to solve the structure of human IBA57 in-house by 5-amino-2,4,6-triiodoisophthalic acid (I3C) high-energy-remote single-wavelength anomalous dispersion (SAD) phasing. Multiple orientations of the same triclinic crystal were exploited to acquire sufficient real data multiplicity for phasing. How the collection of an in-house native data set and its joint use with the I3C derivative through a SIRAS approach decreases the data multiplicity needed by almost 50% is described. Furthermore, it is illustrated that there is a clear data-multiplicity threshold value for success and failure in phasing, and how adding further data does not significantly affect substructure solution and model building. To our knowledge, this is the only structure present in the PDB that has been solved in-house by remote SAD phasing in space group P1 using only one crystal. All of the raw data used, derived from the different orientations, have been uploaded to Zenodo in order to enable software developers to improve methods for data processing and structure solution, and for educational purposes.

Crystal structure of the type VI immunity protein Tdi1 (Atu4351) from Agrobacterium tumefaciens.

The type VI secretion system (T6SS) is a novel multiprotein needle-like apparatus that is distributed widely in Gram-negative bacteria. Bacteria harboring T6SSs inject various effectors into both eukaryotic and prokaryotic cells for interspecies competition or virulence-related processes. The toxicities of the effectors can be neutralized by their cognate immunity proteins. Tde1 (Atu4350)-Tdi1 (Atu4351) has recently been characterized as a T6SS effector-immunity pair in the soil bacterium Agrobacterium tumefaciens and the neutralization mechanism remains unknown. Here, the crystal structure of the immunity protein Tdi1 was determined at 2.40 Å resolution by the single-wavelength anomalous dispersion method. Structural analysis suggested that it is composed of a GAD-like domain and an inserted DUF1851 domain, and both domains show low structural similarities to known structures. There is a positive groove mainly located in the GAD-like domain that may be associated with nucleotide binding. The structure provides a basis for further study of the positive groove as a potential active site.

Anomalous X-ray diffraction studies of ion transport in K+ channels

Potassium ion channels utilize a highly selective filter to rapidly transport K+ ions across cellular membranes. This selectivity filter is composed of four binding sites which display almost equal electron density in crystal structures with high potassium ion concentrations. This electron density can be interpreted to reflect a superposition of alternating potassium ion and water occupied states or as adjacent potassium ions. Here, we use single wavelength anomalous dispersion (SAD) X-ray diffraction data collected near the potassium absorption edge to show experimentally that all ion binding sites within the selectivity filter are fully occupied by K+ ions. These data support the hypothesis that potassium ion transport occurs by direct Coulomb knock-on, and provide an example of solving the phase problem by K-SAD.

Crystal structure of native α-L-rhamnosidase from Aspergillus terreus.

α-L-Rhamnosidases cleave terminal nonreducing α-L-rhamnosyl residues from many natural rhamnoglycosides. This makes them catalysts of interest for various biotechnological applications. The X-ray structure of the GH78 family α-L-rhamnosidase from Aspergillus terreus has been determined at 1.38 Å resolution using the sulfur single-wavelength anomalous dispersion phasing method. The protein was isolated from its natural source in the native glycosylated form, and the active site contained a glucose molecule, probably from the growth medium. In addition to its catalytic domain, the α-L-rhamnosidase from A.terreus contains four accessory domains of unknown function. The structural data suggest that two of these accessory domains, E and F, might play a role in stabilizing the aglycon portion of the bound substrate.

The X-ray structure of human calbindin-D28K: an improved model.

Calbindin-D28K is a widely expressed calcium-buffering cytoplasmic protein that is involved in many physiological processes. It has been shown to interact with other proteins, suggesting a role as a calcium sensor. Many of the targets of calbindin-D28K are of therapeutic interest: for example, inositol monophosphatase, the putative target of lithium therapy in bipolar disorder. Presented here is the first crystal structure of human calbindin-D28K. There are significant deviations in the tertiary structure when compared with the NMR structure of rat calbindin-D28K (PDB entry 2g9b), despite 98% sequence identity. Small-angle X-ray scattering (SAXS) indicates that the crystal structure better predicts the properties of calbindin-D28K in solution compared with the NMR structure. Here, the first direct visualization of the calcium-binding properties of calbindin-D28K is presented. Four of the six EF-hands that make up the secondary structure of the protein contain a calcium-binding site. Two distinct conformations of the N-terminal EF-hand calcium-binding site were identified using long-wavelength calcium single-wavelength anomalous dispersion (SAD). This flexible region has previously been recognized asa protein-protein interaction interface. SAXS data collected in both the presence and absence of calcium indicate that there are no large structural differences in the globular structure of calbindin-D28K between the calcium-loaded and unloaded proteins.

How can data collection affect the success of solving crystal structures using single-wavelength anomalous dispersion?

How can data collection affect the success of solving crystal structures using single-wavelength anomalous dispersion?

Crystal structure of the trimeric N-terminal domain of ciliate Euplotes octocarinatus centrin binding with calcium ions.

Centrin is a member of the EF-hand superfamily of calcium-binding proteins, a highly conserved eukaryotic protein that binds to Ca2+ . Its self-assembly plays a causative role in the fiber contraction that is associated with the cell division cycle and ciliogenesis. In this study, the crystal structure of N-terminal domain of ciliate Euplotes octocarinatus centrin (N-EoCen) was determined by using the selenomethionine single-wavelength anomalous dispersion method. The protein molecules formed homotrimers. Every protomer had two putative Ca2+ ion-binding sites I and II, protomer A, and C bound one Ca2+ ion, while protomer B bound two Ca2+ ions. A novel binding site III was observed and the Ca2+ ion was located at the center of the homotrimer. Several hydrogen bonds, electrostatic, and hydrophobic interactions between the protomers contributed to the formation of the oligomer. Structural studies provided insight into the foundation for centrin aggregation and the roles of calcium ions.

Resolving the structure of metallochaperone AztD

Zinc is an essential nutrient, and proteins mediating zinc homeostasis are important virulence factors among pathogenic bacteria, making them attractive targets for the development of novel antibiotics. Of particular interest are the ATP binding cassette (ABC) transporters, which utilize extracellular solute binding proteins (SBPs) to bind zinc with high affinity and specificity for delivery into the cell via integral membrane permeases. We are studying the zinc import machinery of Paracoccus denitrificans as a model for highly homologous systems in pathogenic bacteria including the carbapenem resistant enterobacteraceae (CRE) species Klebsiella pneumoniae and Citrobacter koseri. Specifically, these species encode an unusual zinc ABC transporter operon aztABCD that encodes a periplasmic metallochaperone (AztD) that transfers zinc specifically to the SBP (AztC). The structure for PdAztC has been solved and features a long, protruding loop containing three His residues. Deletion of the loop or mutation of any of the His residues to Ala completely abrogated zinc transfer from AztD but had no impact on metal binding from solution. From this data, we hypothesized that the loop must be required to access the zinc binding site in AztD, chelate the metal and return it to the AztC binding site. However, without structural information on the AztD chaperone the details of this mechanism remained unclear. We have recently solved high‐resolution crystal structures of AztD from both P. denitrificans and C. koseri using single wavelength anomalous dispersion (SAD) on a lead derivative crystal. This was necessary as there were no homologous of AztD in the protein databank. The protein is a 7‐bladed beta propeller, with zinc bound to three conserved His residues in the central pore. A second zinc binding site was also identified, consistent with solution data indicating that AztD can bind up to three zinc ions. A detailed mechanism for zinc transfer from the primary AztD binding site to AztC is proposed based on the existing solution data, new structures, accessibility of the AztD zinc binding site and electrostatic complementarity between AztD and AztC surfaces. Given the importance of dynamic zinc transfer for bacterial zinc homeostasis and the role of this process in pathogenesis, high‐resolution structural data on zinc binding and transport proteins may be very useful in the development of novel antibiotics for resistant bacteria such as C. koseri.Support or Funding InformationNational Institutes of Health under award number 1SC2GM111170‐01This abstract is from the Experimental Biology 2018 Meeting. There is no full text article associated with this abstract published in The FASEB Journal.

Crystal structure of the MSMEG_4306 gene product from Mycobacterium smegmatis.

The MSMEG_4306 gene from Mycobacterium smegmatis encodes a protein of unknown function with 242 amino-acid residues that contains a conserved zinc-ribbon domain at its C-terminus. Here, the crystal structure of MSMEG_4306 determined by the single-wavelength anomalous dispersion method using just one zinc ion co-purified with the protein is reported. The crystal structure of MSMEG_4306 shows a coiled-coil helix domain in the N-terminal region and a zinc-ribbon domain in the C-terminal region. A structural similarity search against the Protein Data Bank using MSMEG_4306 as a query revealed two similar structures, namely CT398 from Chlamydia trachomatis and HP0958 from Helicobacter pylori, although they share only ∼15% sequence identity with MSMEG_4306. Based on comparative analysis, it is predicted that MSMEG_4306 may be involved in secretion systems, possibly by interacting with multiple proteins or nucleic acids.

Structural characterization of ribT from Bacillus subtilis reveals it as a GCN5-related N-acetyltransferase.

In bacteria, biosynthesis of riboflavin occurs through a series of enzymatic steps starting with one molecule of GTP and two molecules of ribulose-5-phosphate. In Bacillus subtilis (B. subtilis) the genes (ribD/G, ribE, ribA, ribH and ribT) which are involved in riboflavin biosynthesis are organized in an operon referred as rib operon. All the genes of rib operon are characterized functionally except for ribT. The ribT gene with unknown function is found at the distal terminal of rib operon and annotated as a putative N-acetyltransferase. Here, we report the crystal structure of ribT from B. subtilis (bribT) complexed with coenzyme A (CoA) at 2.1 Å resolution determined by single wavelength anomalous dispersion method. Our structural study reveals that bribT is a member of GCN5-related N-acetyltransferase (GNAT) superfamily and contains all the four conserved structural motifs that have been in other members of GNAT superfamily. The members of GNAT family transfers the acetyl group from acetyl coenzyme A (AcCoA) to a variety of substrates. Moreover, the structural analysis reveals that the residues Glu-67 and Ser-107 are suitably positioned to act as a catalytic base and catalytic acid respectively suggesting that the catalysis by bribT may follow a direct transfer mechanism. Surprisingly, the mutation of a non-conserved amino acid residue Cys-112 to alanine or serine affected the binding of AcCoA to bribT, indicating a possible role of Cys-112 in the catalysis.