Single Synthetic Aperture Radar Image Research Articles

Assessing the Potential of Multi-Temporal Conditional Generative Adversarial Networks in SAR-to-Optical Image Translation for Early-Stage Crop Monitoring

The incomplete construction of optical image time series caused by cloud contamination is one of the major limitations facing the application of optical satellite images in crop monitoring. Thus, the construction of a complete optical image time series via image reconstruction of cloud-contaminated regions is essential for thematic mapping in croplands. This study investigates the potential of multi-temporal conditional generative adversarial networks (MTcGANs) that use a single synthetic aperture radar (SAR) image acquired on a prediction date and a pair of SAR and optical images acquired on a reference date in the context of early-stage crop monitoring. MTcGAN has an advantage over conventional SAR-to-optical image translation methods as it allows input data of various compositions. As the prediction performance of MTcGAN depends on the input data composition, the variations in the prediction performance should be assessed for different input data combination cases. Such an assessment was performed through experiments using Sentinel-1 and -2 images acquired in the US Corn Belt. MTcGAN outperformed existing SAR-to-optical image translation methods, including Pix2Pix and supervised CycleGAN (S-CycleGAN), in cases representing various input compositions. In particular, MTcGAN was substantially superior when there was little change in crop vitality between the reference and prediction dates. For the SWIR1 band, the root mean square error of MTcGAN (0.021) for corn was significantly improved by 54.4% and 50.0% compared to Pix2Pix (0.046) and S-CycleGAN (0.042), respectively. Even when there were large changes in crop vitality, the prediction accuracy of MTcGAN was more than twice that of Pix2Pix and S-CycleGAN. Without considering the temporal intervals between input image acquisition dates, MTcGAN was found to be beneficial when crops were visually distinct in both SAR and optical images. These experimental results demonstrate the potential of MTcGAN in SAR-to-optical image translation for crop monitoring during the early growth stage and can serve as a guideline for selecting appropriate input images for MTcGAN.

A GAN-Based Augmentation Scheme for SAR Deceptive Jamming Templates with Shadows

To realize fast and effective synthetic aperture radar (SAR) deception jamming, a high-quality SAR deception jamming template library can be generated by performing sample augmentation on SAR deception jamming templates. However, the current sample augmentation schemes of SAR deception jamming templates face certain problems. First, the authenticity of the templates is low due to the lack of speckle noise. Second, the generated templates have a low similarity to the target and shadow areas of the input templates. To solve these problems, this study proposed a sample augmentation scheme based on generative adversarial networks, which can generate a high-quality library of SAR deception jamming templates with shadows. The proposed scheme solved the two aforementioned problems from the following aspects. First, the influence of the speckle noise was considered in the network to avoid the problem of reduced authenticity in the generated images. Second, a channel attention mechanism module was used to improve the network’s learning ability of the shadow features, which improved the similarity between the generated template and the shadow area in the input template. Finally, the single generative adversarial network (SinGAN) scheme, which is a generative adversarial network capable of image sample augmentation for a single SAR image, and the proposed scheme were compared regarding the equivalent number of looks and the structural similarity between the target and shadow in the sample augmentation results. The comparison results demonstrated that, compared to the templates generated by the SinGAN scheme, those generated by the proposed scheme had targets and shadow features similar to those of the original image and could incorporate speckle noise characteristics, resulting in a higher authenticity, which helps to achieve fast and effective SAR deception jamming.

Application of different internal solitary wave theories for SAR remote sensing inversion in the northern South China Sea

This study discusses the theoretical method of the inversion of internal solitary waves (ISWs) characteristic parameters using synthetic aperture radar (SAR) images and ocean reanalysis data. Based on the horizontal distribution characteristics of the pixel intensity of the internal wave fringe in the image, an imaging theoretical model based on the extended Korteweg-de Vries (eKdV) and Benjamin-Ono (BO) theories in SAR was constructed, and the peak-to-peak method and curve-fitting method for calculating the characteristic wavelength of internal solitary waves were determined. The results show that the eKdV theoretical model has the advantage of inverting solitary waves with large amplitudes under the same marine stratified structure, and it provides a more reasonable characteristic parameter estimation than the traditional Korteweg-de Vries (KdV) theory. Although the BO theory is theoretically applicable to deep-water internal waves whose wavelength is far less than the water depth, it can still provide good inversion results in practical applications. Compared to the peak-to-peak method, the curve fitting method fully considers the pixel intensity variation characteristics of the internal wave fringe profile of the image, and the calculated characteristic parameters are more reasonable. Using the maximum buoyancy frequency and internal wave vertical mode to construct the marine stratification model of the deep waters of the northeastern South China Sea may have great uncertainty, and it is better to calculate the interface depth using the relative error of the coefficients of two-layer and continuous internal wave equations. In addition, this study also proposes an internal wave inversion method using continuous SAR images, which provides more reference and support for the selection of internal wave inversion models and reliability test of inversion results in a single SAR image.

A Geometry-Aware Consistent Constraint for Height Estimation From a Single SAR Imagery in Mountain Areas

Height estimation from a single synthetic aperture radar(SAR) imagery has shown a great potential in real-time scene understanding and environment detection. It is a mathematical ill-posed problem for that a single 2D image may be projected from multiple 3D scenes. Then, the problem is that the accuracy of height estimation from a single SAR image is not high enough without prior knowledge, especially in mountain areas. Thus, we proposes a geometry-aware consistent constraint(GACC) to improve the performance of single SAR height estimation. The simulated SAR images generated from height maps are used to establish high precision transformation between map and radar coordinates in mountain areas. The main idea of GACC is that the simulated SAR image generated from estimated height map should be consistent with the ground truth simulated SAR image. A sparse height map is included as the supplementary inputs to further improve the accuracy of estimated height maps. Comparison experiments are performed in Geermu, Huangshan and Guiyang datasets and the results show that the RMSE of the estimated height map by Unet with GACC and 0.0434% sparse height gets reduced by about 98%, 78% and 94% compared with that by Unet in the three datasets.

DDFormer: A Dual-Domain Transformer for Building Damage Detection Using High-Resolution SAR Imagery

Earthquakes are catastrophic in terms of damage to buildings. Synthetic aperture radar (SAR) has emerged as an effective tool to respond to seismic hazards. However, pre- and post-event high-resolution data are not always available for the affected areas, and the complex geometric properties of buildings pose a challenge to building damage detection. Therefore, this letter proposes the Dual-Domain Transformer (DDFormer) semantic segmentation model for damaged buildings detection using a single post-earthquake high-resolution SAR image. The difference between intact and collapsed building features is enhanced by adaptive frequency and spatial modules. Taking the 2023 Turkey earthquake as an example, the experiments are conducted on two high-resolution co-polarized SAR data (Capella and GF-3). The DDFormer achieves optimal detection accuracy with mean IOU (mIOU) and F-Score of 81.81% and 90%, respectively. In addition, our results are in high consistent with the Turkey Earthquake Report published by Microsoft with a correlation coefficient of 0.626. The above experiments demonstrate the robustness and effectiveness of DDFormer.

TransUNet++SAR: Change Detection with Deep Learning about Architectural Ensemble in SAR Images

In the application of change detection satellite remote sensing images, synthetic aperture radar (SAR) images have become a more important data source. This paper proposes a new end-to-end SAR image change network architecture—TransUNet++SAR—that combines Transformer with UNet++. First, the convolutional neural network (CNN) was used to obtain the feature maps of the single time SAR images layer by layer. Tokenized image patches were encoded to extract rich global context information. Using improved Transformer for effective modeling of global semantic relations can generate rich contextual feature representations. Then, we used the decoder to upsample the encoded features, connected the encoded multi-scale features with the high-level features by sequential connection to learn the local-global semantic features, recovered the full spatial resolution of the feature map, and achieved accurate localization. In the UNet++ structure, the bitemporal SAR images are composed of two single networks, which have shared weights to learn the features of the single temporal image layer by layer to avoid the influence of SAR image noise and pseudo-change on the deep learning process. The experiment results show that the experimental effect of TransUNet++SAR on the Beijing, Guangzhou, and Qingdao datasets were significantly better than other deep learning SAR image change detection algorithms. At the same time, compared with other Transformer related change detection algorithms, the description of the changed area edge was more accurate. In the dataset experiments, the model had higher indices than the other models, especially the Beijing building change datasets, where the IOU was 9.79% higher and F1-score was 4.38% higher.

SAR2HEIGHT: Height Estimation from a Single SAR Image in Mountain Areas via Sparse Height and Proxyless Depth-Aware Penalty Neural Architecture Search for Unet

Height estimation from a single Synthetic Aperture Radar (SAR) image has demonstrated a great potential in real-time environmental monitoring and scene understanding. The projection of a single 2D SAR image from multiple 3D height maps is an ill-posed problem in mathematics. Although Unet has been widely used for height estimation from a single image, the ill-posed problem cannot be completely resolved, and it leads to deteriorated performance with limited training data. This paper tackles the problem by Unet with the help of supplementary sparse height information and proxyless neural architecture search (PDPNAS) for Unet. The sparse height, which can be accepted from low-resolution SRTM or LiDAR products, is included as the supplementary information and is helpful to improve the accuracy of the estimated height map, especially in mountain areas with a wide range of elevations. In order to explore the effect of sparsity of sparse height on the estimated height map, a parameterized method is proposed to generate sparse height with a different sparse ratio. In order to further improve the accuracy of the estimated height map from a single SAR imagery, PDPNAS for Unet is proposed. The optimal architecture for Unet can be searched by PDPNAS automatically with the help of a depth-aware penalty term p. The effectiveness of our approach is evaluated by visual and quantitative analysis on three datasets from mountain areas. The root mean squared error (RMSE) is reduced by 90.30% through observing only 0.0109% of height values from a low-resolution SRTM product. Furthermore, the RMSE is reduced by 3.79% via PDPNAS for Unet. The research proposes a reliable method for estimating height and an alternative method for wide-area DEM mapping from a single SAR image, especially for the implementation of real-time DEM estimation in mountain areas.

Shallow Sea Topography Detection from Multi-Source SAR Satellites: A Case Study of Dazhou Island in China

Accurate measurement of underwater topography in the coastal zone is essential for human marine activities, and the synthetic aperture radar (SAR) presents a completely new solution. However, underwater topography detection using a single SAR image is vulnerable to the interference of sea state and sensor noise, which reduces the detection accuracy. A new underwater topography detection method based on multi-source SAR (MSSTD) was proposed in this study to improve the detection precision. GF-3, Sentinel-1, ALOS PALSAR, and ENVISAT ASAR data were used to verify the sea area of Dazhou Island. The detection result was in good agreement with the chart data (MAE of 2.9 m and correlation coefficient of 0.93), and the detection accuracy was improved over that of a single SAR image. GF-3 image with 3 m spatial resolution performed best in bathymetry among the four SAR images. Additionally, the resolution of the SAR image had greater influence on bathymetry compared with polarization and radar band. The ability of MSSTD has been proved in our work. Collaborative multi-source satellite observation is a feasible and effective scheme in marine research, but its application potential in underwater topography detection still requires further exploration.

End-to-End Method With Transformer for 3-D Detection of Oil Tank From Single SAR Image

In recent years, deep learning has been successfully applied in the field of synthetic aperture radar (SAR) image object detection. However, unlike ships and tanks targets, the oil tank targets in SAR image are usually dense and compact with more overlaps and discrete scattering centers, which greatly increases the difficulty of extracting location and structural parameters. Most of the existing methods transfer the methods suitable for natural image to the SAR image field, without considering the unique characteristics of SAR image. Therefore, in this article, we propose an improved model based on the end-to-end transformer network, which is the first model introducing transformer network to 3-D detection of oil tank targets from single SAR image. We input the incidence angle into the transformer model as a priori token. Then, we propose a feature description operator (FDO) based on the scattering centers that are used as an aid to improve the precision of predictions. In addition, we also propose a cylinder IOU as a more suitable evaluation metric for 3-D detection of oil tank. Finally, we evaluate our model on an SAR image dataset that contains SAR images from RADARSAT-2, TerraSAR-X, and GF-3 with different incidence angles. Our experiments demonstrate that our proposed model achieves the AP of 77.6% compared with 60.8% of baseline, which proves the effectiveness of the introduction of observation conditions, cylinder IOU loss (CI Loss), and the FDO based on the scattering centers in our model and is appealing for 3-D detection of oil tank.

Autofocus-Based Estimation of Penetration Depth and Permittivity of Ice Volumes and Snow Using Single SAR Images

An intrinsic challenge in the geophysical interpretation of low-frequency synthetic aperture radar (SAR) imagery of semitransparent media, such as ice sheets, is the position ambiguity of the scattering structures within the glacial volume. Commonly tackled by applying interferometric and tomographic techniques, their spaceborne implementation exhibits by orders higher complexity compared to missions relying on single SAR images, making them cost expensive or, in the context of planetary missions, even impossible due to limited navigation capability. Besides, even these sophisticated techniques are commonly biased due to inaccurate permittivity estimates, leading to geometric distortions up to several meters. We present a novel inversion procedure to estimate volume parameters of ice sheets, namely, the depth of the scattering layer within the glacial volume and the dielectric permittivity of the ice, based on single-image single-polarization SAR acquisitions. The information is inherent in the processed SAR data as phase errors on the azimuth signals resulting from uncompensated nonlinear propagation of the radar echoes through ice. We suggest a local map-drift autofocus approach to quantify and spatially resolve the phase errors and an inversion model to relate them to the penetration depth and permittivity. Testing the proposed technique using P-band SAR data acquired using DLR’s airborne sensor F-SAR during the ARCTIC15 campaign in Greenland shows promising results and good agreement with tomographic products of the analyzed test site.

Combined Estimation of Ionospheric Effects in SAR Images Exploiting Faraday Rotation and Autofocus

At lower frequencies, synthetic aperture radar (SAR) images can be significantly affected by ionospheric scintillations. This letter proposes an approach to estimate ionospheric artifacts in single SAR images by combining Faraday rotation (FR) estimates and autofocus methods by using a Wiener filter. This novel approach achieves superior performance compared to using these techniques independently. This improvement is demonstrated by injecting randomly simulated ionospheric phase screens into simulated point targets and airborne data adjusted to the parameters of the Biomass system.

A Fast Algorithm for High Accuracy Airborne SAR Geolocation Based on Local Linear Approximation

Synthetic aperture radar (SAR) is a kind of high-resolution imaging radar, which can work in any weather conditions and is often used for target positioning. Airborne SAR has the advantages of flexible scanning geometry and high spatial resolution compared with Spaceborne SAR, but the quality of SAR image and positioning accuracy is affected by air turbulence and mechanical vibration. In practical applications, it is vital to improve Airborne SAR’s geometric positioning accuracy without ground control points or other reference image information. When positioning a single SAR image with long-range, the Earth surface model is often used as an additional equation to solve the Range-Doppler (RD) model. However, the Earth surface equation is difficult to solve the target height accurately. This study proposed an Airborne SAR target positioning methodology based on a local linear approximation of the Earth surface equation. The proposed local Linear RD (L-RD) model establishes a linear constraint of the local elevation, and the iterative algorithm converges rapidly. To further improve the efficiency of geolocation, we propose a method to directly obtain the initial geolocation used for the iteration based on the geometric relationship. An iterative framework is also proposed to enhance positioning accuracy when DEM is available. The experimental results show that the proposed method can significantly improve the positioning accuracy and reliability of Airborne SAR positioning without control points compared to other methods.

Building Damage Detection Based on OPCE Matching Algorithm Using a Single Post-Event PolSAR Data

Synthetic aperture radar (SAR) is an effective tool in detecting building damage. At present, more and more studies detect building damage using a single post-event fully polarimetric SAR (PolSAR) image, because it permits faster and more convenient damage detection work. However, the existence of non-buildings and obliquely-oriented buildings in disaster areas presents a challenge for obtaining accurate detection results using only post-event PolSAR data. To solve these problems, a new method is proposed in this work to detect completely collapsed buildings using a single post-event full polarization SAR image. The proposed method makes two improvements to building damage detection. First, it provides a more effective solution for non-building area removal in post-event PolSAR images. By selecting and combining three competitive polarization features, the proposed solution can remove most non-building areas effectively, including mountain vegetation and farmland areas, which are easily confused with collapsed buildings. Second, it significantly improves the classification performance of collapsed and standing buildings. A new polarization feature was created specifically for the classification of obliquely-oriented and collapsed buildings via development of the optimization of polarimetric contrast enhancement (OPCE) matching algorithm. Using this developed feature combined with texture features, the proposed method effectively distinguished collapsed and obliquely-oriented buildings, while simultaneously also identifying the affected collapsed buildings in error-prone areas. Experiments were implemented on three PolSAR datasets obtained in fully polarimetric mode: Radarsat-2 PolSAR data from the 2010 Yushu earthquake in China (resolution: 12 m, scale of the study area: 50 km2); ALOS PALSAR PolSAR data from the 2011 Tohoku tsunami in Japan (resolution: 23.14 m, scale of the study area: 113 km2); and ALOS-2 PolSAR data from the 2016 Kumamoto earthquake in Japan (resolution: 5.1 m, scale of the study area: 5 km2). Through the experiments, the proposed method was proven to obtain more than 90% accuracy for built-up area extraction in post-event PolSAR data. The achieved detection accuracies of building damage were 82.3%, 97.4%, and 78.5% in Yushu, Ishinomaki, and Mashiki town study sites, respectively.

CG-Net: Conditional GIS-Aware Network for Individual Building Segmentation in VHR SAR Images

Object retrieval and reconstruction from very high resolution (VHR) synthetic aperture radar (SAR) images are of great importance for urban SAR applications, yet highly challenging owing to the complexity of SAR data. This paper addresses the issue of individual building segmentation from a single VHR SAR image in large-scale urban areas. To achieve this, we introduce building footprints from GIS data as complementary information and propose a novel conditional GIS-aware network (CG-Net). The proposed model learns multi-level visual features and employs building footprints to normalize the features for predicting building masks in the SAR image. We validate our method using a high resolution spotlight TerraSAR-X image collected over Berlin. Experimental results show that the proposed CG-Net effectively brings improvements with variant backbones. We further compare two representations of building footprints, namely complete building footprints and sensor-visible footprint segments, for our task, and conclude that the use of the former leads to better segmentation results. Moreover, we investigate the impact of inaccurate GIS data on our CG-Net, and this study shows that CG-Net is robust against positioning errors in GIS data. In addition, we propose an approach of ground truth generation of buildings from an accurate digital elevation model (DEM), which can be used to generate large-scale SAR image datasets. The segmentation results can be applied to reconstruct 3D building models at level-of-detail (LoD) 1, which is demonstrated in our experiments.

A Practical Solution for SAR Despeckling With Adversarial Learning Generated Speckled-to-Speckled Images

In this letter, we aim to address a synthetic aperture radar (SAR) despeckling problem with the necessity of neither clean (speckle-free) SAR images nor independent speckled image pairs from the same scene, and a practical solution for SAR despeckling (PSD) is proposed. First, an adversarial learning framework is designed to generate speckled-to-speckled (S2S) image pairs from the same scene in the situation where only single speckled SAR images are available. Then, the S2S SAR image pairs are employed to train a modified despeckling Nested-UNet model using the Noise2Noise (N2N) strategy. Moreover, an iterative version of the PSD method (PSDi) is also presented. Experiments are conducted on both synthetic speckled and real SAR data to demonstrate the superiority of the proposed methods compared with several state-of-the-art methods. The results show that our methods can reach a good tradeoff between feature preservation and speckle suppression.

A convex variational method for super resolution of SAR image with speckle noise

Super resolution (SR) is an attractive issue in image processing. In the synthetic aperture radar (SAR) image, speckle noise is a crucial problem that is multiplicative. Therefore, numerous custom SR methods considering additive Gaussian noise cannot respond to this image degradation model. The main contribution of this paper is to propose a novel variational convex optimization model for the single SAR image SR reconstruction with speckle noise that is one of the first works in this field. Employing maximum a posteriori (MAP) estimator and proposing an effective regularization based on combination of sparse representation, total variation (TV) and a novel feature space based soft projection tool to use merits of them is the main idea. To solve the proposed model, the split Bregman algorithm is employed efficiently. Experimental results for the multiple synthetic and realistic SAR images show the effectiveness of proposed method in terms of both fidelity and visual perception.

Estimating the Growing Stem Volume of the Planted Forest Using the General Linear Model and Time Series Quad-Polarimetric SAR Images.

Increasing the area of planted forests is rather important for compensation the loss of natural forests and slowing down the global warming. Forest growing stem volume (GSV) is a key indicator for monitoring and evaluating the quality of planted forest. To improve the accuracy of planted forest GSV located in south China, four L-band ALOS PALSAR-2 quad-polarimetric synthetic aperture radar (SAR) images were acquired from June to September with short intervals. Polarimetric characteristics (un-fused and fused) derived by the Yamaguchi decomposition from time series SAR images with different intervals were considered as independent variables for the GSV estimation. Then, the general linear model (GLM) obeyed the exponential distribution were proposed to retrieve the stand-level GSV in plantation. The results show that the un-fused power of double bounce scatters and four fused variables derived from single SAR image is highly sensitive to the GSV, and these polarimeric characteristics derived from the time series images more significantly contribute to improved estimation of GSV. Moreover, compared with the estimated GSV using the semi-exponential model, the employed GLM model with less limitations and simple algorithm has a higher saturation level (nearly to 300 m3/ha) and higher sensitivity to high forest GSV values than the semi-exponential model. Furthermore, by reducing the external disturbance with the help of time average, the accuracy of estimated GSV is improved using fused polarimeric characteristics, and the estimation accuracy of forest GSV was improved as the images increase. Using the fused polarimetric characteristics (Dbl×Vol/Odd) and the GLM, the minimum RRMSE was reduced from 33.87% from single SAR image to 24.42% from the time series SAR images. It is implied that the GLM is more suitable for polarimetric characteristics derived from the time series SAR images and has more potential to improve the planted forest GSV.

An Anisotropic Scattering Analysis Method Based on the Statistical Properties of Multi-Angular SAR Images

The scatterings of many targets are aspect dependent, which is called anisotropy. Multi-angular synthetic aperture radar (SAR) is a suitable means of detecting this kind of anisotropic scattering behavior by viewing targets from different aspect angles. First, the statistical properties of anisotropic and isotropic scatterings are studied in this paper. X-band chamber circular SAR data are used. The result shows that isotropic scatterings have stable distributions in different aspect viewing angles while the distributions of anisotropic scatterings are various. Then the statistical properties of single polarization high-resolution multi-angular SAR images are modeled by different distributions. G 0 distribution performs best in all types of areas. An anisotropic scattering analysis method based on the multi-angular statistical properties is proposed. A likelihood ratio test based on G 0 distribution is used to measure the anisotropy. Anisotropic scatterings can be discriminated from isotropic scatterings by thresholding. Besides, the scattering direction can also be estimated by our method. AHH polarization C-band circular SAR data are used to validate our method. The result of using G 0 distribution is compared with the result of using Rayleigh distribution. The result of using G 0 distribution is the better one.

Comparison of water cloud models with different layers for rice yield estimation from a single TerraSAR image

ABSTRACT This paper discusses the estimation of rice yield from Water Cloud Models (WCM) with different layers by a single X-band (8–12 GHz) Synthetic Aperture Radar (SAR) image, from a satellite named TerraSAR. A simulated annealing (SA) algorithm, with a ‘leave-one-out’ cross-validation method, was applied. The results were related to actual rice parameters, with a coefficient of determination (R 2) of 0.6059, which not only demonstrated that a single-layer WCM was better than a double-layer WCM for grain number estimation, but also indicated the potential to estimate rice production from a single SAR image. A comparison of estimates indicated that the single-layer WCM overcame insufficiencies that existed in the double-layer WCM. The range of backscattering coefficients from the model was also discussed.

Flood mapping under vegetation using single SAR acquisitions

Synthetic Aperture Radar (SAR) enables 24-hour, all-weather flood monitoring. However, accurate detection of inundated areas can be hindered by the extremely complicated electromagnetic interaction phenomena between microwave pulses, and horizontal and vertical targets. This manuscript focuses on the problem of inundation mapping in areas with emerging vegetation, where spatial and seasonal heterogeneity makes the systematic distinction between dry and flooded backscatter response even more difficult. In this context, image interpretation algorithms have mostly used detailed field data and reference image(s) to implement electromagnetic models or change detection techniques. However, field data are rare, and despite the increasing availability of SAR acquisitions, adequate reference image(s) might not be readily available, especially for fine resolution acquisitions. To by-pass this problem, this study presents an algorithm for automatic flood mapping in areas with emerging vegetation when only single SAR acquisitions and common ancillary data are available. First, probability binning is used for statistical analysis of the backscatter response of wet and dry vegetation for different land cover types. This analysis is then complemented with information on land use, morphology and context within a fuzzy logic approach. The algorithm was applied to three fine resolution images (one ALOS-PALSAR and two COSMO-SkyMed) acquired during the January 2011 flood in the Condamine-Balonne catchment (Australia). Flood extent layers derived from optical images were used as validation data, demonstrating that the proposed algorithm had an overall accuracy higher than 80% for all case studies. Notwithstanding the difficulty to fully discriminate between dry and flooded vegetation backscatter heterogeneity using a single SAR image, this paper provides an automatic, data parsimonious algorithm for the detection of floods under vegetation.