Single Stitch Research Articles

Single Additional Stitch During Rapid Deployment Aortic Valve Replacement to Reduce Postimplant Pacemaker Needs.

Single Additional Stitch During Rapid Deployment Aortic Valve Replacement to Reduce Postimplant Pacemaker Needs.

Feasibility of a new endoscopic suturing device: a first Western experience (with video)

Endoscopic hand suturing (EHS) is a new technique for the closure of mucosal defects in the GI tract. Although this method was tested for wound closure after endoscopic submucosal dissection (ESD) in Japan, a feasibility test in a Western setting is lacking. In this study, we present our first experience with EHS for different indications and in different anatomic locations. The technical success of EHS and suturing speed were retrospectively determined for all available EHS cases in our center. Technical success was defined as complete closure of the mucosal defect or visually tight fixation of the target. A total of 19 EHS procedures were performed in 17 patients (mean age, 54.9 years; standard error of the mean [SEM], 4.2 years; male, 53% [n= 9]). Technical success was achieved in 78.9% (n= 15). Total EHS operation time was 40.0 minutes (SEM, 3.1 minutes) with 3.3 minutes (SEM, 0.2 minutes) per single stitch. In a constant team of endoscopist and assistant, mean stitch times declined significantly from the first 4 to the second 4 of 8 cases (4.0 [SEM, 0.6] vs 2.3 [SEM, 0.2] minutes, P= .02). EHS was technically feasible and applicable in different anatomic locations. Further studies may elucidate a possible effect on adverse event rates of endoscopic resections.

Superior load-to-failure in an all-suture anchor system for all-inside meniscal repair compared to a PEEK-cage anchor system in an experimental cadaveric test setting.

The purpose of this study was to compare the biomechanical properties of a latest generation all-suture anchor repair device (ASARD) for meniscal repair with that of a latest generation PEEK-cage anchor repair device (PCARD) in an experimental setting using cadaveric menisci. Twenty-six menisci were obtained from the knees of fresh body donors. Artificially created meniscal lesions were treated randomly, using a single stitch with either an ASARD or a PCARD. Cyclic biomechanical testing, utilising a universal material testing machine and following an established protocol, was carried out and load-to-failure (LTF), displacement, stiffness, and mode-of-failure (MOF) reported. Mean LTF was found to be 61% higher in the ASARD group at 107.10 N (standard deviation [SD], 42.34), compared to 65.86 N (SD, 27.42) in the PCARD group with statistical significance (p = 0.022). The ASARD exhibited a trend towards higher stiffness (10.35 N; SD, 3.92 versus 7.78 N; SD; 3.59) and higher displacement at cycles one, 100, and 499 (1.64, 3.27, and 4.17 mm versus 0.93, 2.19, and 2.83 mm) compared to the PCARD. Cheese wiring was the most common mode-of-failure in both groups (76.9%). This study demonstrates that an ASARD shows a higher mean LTF than a PCARD when compared in an experimental biomechanical setting. Level III.

The Impact of Miss Stitch on the Dimensional Properties and Stability of Double Weft Knitted Fabrics after Dry and Washing Relaxations

This study investigated the effect of the rib set-out repeat and single miss stitches on the structural properties and dimensional stability of double weft knitted fabrics compared with half Milano rib. Nine variations of double weft knitted fabrics were produced, each with a different number of inactive needles at the width repeat Rb. The fabrics were tested after 10 days of dry relaxation and five washings. The fabric’s structural repeat at the height Rh consisted of a combination of two courses, rib and plain (variant 1), and rib set-out and single with miss (float) stitch, with stitch repeats varying at the width Rb (for variants 2–10). The miss stitch was made on the technical back of the knitted fabrics, and the number of inactive needles during the production of the single and double stitches ranged from 1 to 3. The fabrics were manufactured using a 10-gauge flat bed-knitting machine from blended wool/PAN (60% wool, 40% PAN) 25×2tex×2 yarn. The results demonstrated that the width repeat of miss knit stitches Rb (different numbers of knit and miss loop stitches) plays a crucial role in determining the dimensional stability and structural properties of double knitted fabrics. The number of washing cycles did not significantly impact the structural properties (around ±5%). The research results demonstrated shrinkage in the length and width directions, specifically after the first two washing cycles. The rib set-out repeat and single miss stitches affect dimensional changes in both directions: an increase in the number of inactive needles increases shrinkage in the length and decreases shrinkage in the width direction. Overall, this study highlights the importance of the number and placement of miss stitches during the design process of double weft knitted fabrics, particularly when aiming to achieve specific structural and dimensional properties.

Transoral Robotic-Assisted Neurosurgery for Skull Base and Upper Spine Lesions.

The application of the da Vinci Surgical System in neurosurgery is limited due to technical difficulties requiring precise maneuvers and small instruments. This study details the advantages and disadvantages of robotics in neurosurgery and the reachable range of the transoral approach to lesions of the skull base and upper cervical spine. In a cadaver study, the da Vinci Xi robot, lacking haptic feedback, was utilized for sagittal and coronal approaches on 5 heads, facilitating dura suturing in 3, with a 30°-angled drill for bone removal. Perfect exposure of all the nasopharyngeal sites, clivus, sellar, and choana, including the bilateral eustachian tubes, was achieved without any external incisions using this palatal split approach of transoral robotic surgery. The time required to perform a single stitch, knot, and complete single suture in robotic suturing of deep-seated were significantly less compared to manual suturing via the endonasal approach. This is the first report to show the feasibility of suturing the dural defect in deep-seated lesions transorally and revealed that the limit of reach in the coronal plane via a transoral approach with incision of the soft palate is the foramen ovale. This preclinical investigation also showed that the transoral robotic approach is feasible for lesions extending from the sellar to the C2 in the sagittal plane. Refinement of robotic instruments for specific anatomic sites and future neurosurgical studies are needed to further demonstrate the feasibility and effectiveness of this system in treating benign and malignant skull base lesions.

Outcome of Flexor Tendon Repair Using Eight-Strand Core Stitch Without Postoperative Finger Splinting.

There are no reports that detail clinical outcomes using the 8-strand suture techniques and early active mobilization. We aim to report the outcome of using an 8-strand double-cruciate core suture followed by early active motion without finger splinting. Thirty-five patients with 41 affected digits were operated and followed up for at least 6 months. A double cruciate repair with 4 single cross-grasping stitches on either side was employed. Active full-range finger flexion/extension exercises were allowed from the third postoperative day with the wrist held in the neutral position. The total active motion (TAM) calculated for the proximal interphalangeal and distal interphalangeal joints averaged 151° ± 22°, and the TAM% averaged 86% ± 13%. Based on the original Strickland-Glocovac criteria, excellent and good outcomes were achieved in 25 of 29 fingers (86.2%). An average extension lag of 21° ± 11° (range 10°-40°) was observed in 11 (38%) fingers. The Buck-Gramcko scale showed excellent and good results in 10 (83.4%) thumbs. Active interphalangeal range of motion averaged 68° ± 23°. An average extension lag of 12° ± 4° (range 10°-20°) was observed in 7 (58%) thumbs. Complications occurred in 4 thumbs, including bowstringing (2), rupture (1), and flexion contracture of 60° (1). Using the 8-strand repair technique and active mobilization performed by the patient is both practical and cost-saving. Intensive supervision of a hand therapist is generally not required. Notably improved outcomes have been achieved while preventing adhesions at the repair site. Further clinical outcome studies devoted specifically to the flexor pollicis longus are recommended to validate early-phase active mobilization following the 8-strand repair.

Robot-assisted partial nephrectomy using the novel Hugo™ RAS system: Feasibility, setting and perioperative outcomes of the first off-clamp series.

Hugo Robot-Assisted Surgery (RAS) System has been conceived with enhanced modularity but its role for nephron-sparing surgery setting still remains poorly explored. We aimed to describe our experience in robot-assisted partial nephrectomy (RAPN) with a three-arms setting for the first off-clamp series using the new Hugo RAS System. Patients were placed on an extended flank position at the margin of the surgical bed with a slightly flexion (45°). The first 11 mm robotic trocar (camera port) was placed along the pararectal line 14 ± 2 cm far from the umbilicus. The pneumoperitoneum was then induced through the AirSeal system (SurgiQuest, Milford, Connecticut, USA©). Two more 8 mm operative robotic ports were placed under direct vision, either 8 ± 1 cm far from optic's port. Two 12 mm laparoscopic ports for bed-assistant were placed between robotic ports. Monopolar curved shears, fenestrated grasper, and large needle driver were used in a three-instruments configuration. Off-clamp RAPN was successfully performed in seven patients with cT1 renal masses using a trans-peritoneal route. Median port placement and docking time was 6 min (IQR, 4-8 min). Hemostasis was achieved through renorraphy using a single transfix stitch with sliding clips technique. There was no need for additional ports placement. No intraoperative complications occurred, no clashing of robotic instruments or between the robotic arms was observed. No technical failures of the system occurred. Median console time was 83 min (IQR, 68-115 min). Median estimated blood loss were 200 ml (IQR, 50-400 ml). All patients were discharged between post-operative day 2 and 3, without the need of hospital readmission. No complications were recorded within the first 30 post-operative days. We performed the first series of off-clamp RAPN using the novel HUGO RAS System. This novel robotic platform showed an easy-friendly docking system, providing excellent perioperative outcomes with a simple three-arms configuration.

History of surgical treatment of lymphatic drainage at the Department of Plastic and Aesthetic Surgery, St. Anne's University Hospital in Brno.

The Department of Plastic and Aesthetic Surgery, St. Anne's University Hospital in Brno, and Faculty of Medicine of Masaryk University, Brno, has a long history of surgical treatment of lymphedema and elephantiasis, which started in 1970s. There were many types of surgeries described and performed at our department - starting with prof. Bařinka's radical operation of elephantiasis, then lower limb end-to-side lymphovenous anastomosis pulled through the wall to the great saphenous vein, and genital lymphedema reduction. We call this era "the first period" of surgical lymphedema treatment. "The second period" started in 2016 by using free flaps with lymph nodes or vascularized lymph nodes and using microsurgical techniques of end-to-end, end-to-side and side-to-end lymphovenous anastomoses to the subcutaneous veins of a small calibre, which then drain the lymph into the blood stream. "The third period" started 2 years ago after the visit of prof. Yang from Taiwan - we started to use the method of single stitch end-to-side anastomosis to big subcutaneous veins like the great saphenous vein or the cephalic vein.

Enhancing microsurgical skills in neurosurgery residents of low-income countries: A comprehensive guide

Background: The main objectives of this paper are to outline the essential tools, instruments, and equipment needed to set up a functional microsurgery laboratory that is affordable for low-income hospitals and to identify cost-effective alternatives for acquiring microsurgical equipment, such as refurbished or donated instruments, collaborating with medical device manufacturers for discounted rates, or exploring local suppliers. Methods: Step-by-step instructions were provided on setting up the microsurgery laboratory, including recommendations for the layout, ergonomic considerations, lighting, and sterilization processes while ensuring cost-effectiveness, as well as comprehensive training protocols and a curriculum specifically tailored to enhance microsurgical skills in neurosurgery residents. Results: We explored cost-effective options for obtaining microsurgery simulators and utilizing open-source or low-cost virtual training platforms. We also included guidelines for regular equipment maintenance, instrument sterilization, and establishing protocols for infection control to ensure a safe and hygienic learning environment. To foster collaboration between low-income hospitals and external organizations or institutions that can provide support, resources, or mentorship, this paper shows strategies for networking, knowledge exchange, and establishing partnerships to enhance microsurgical training opportunities further. We evaluated the impact and effectiveness of the low-cost microsurgery laboratory by assessing the impact and effectiveness of the established microsurgery laboratory in improving the microsurgical skills of neurosurgery residents. About microsutures and microanastomosis, after three weeks of training, residents showed improvement in “surgical time” for ten separate simple stitches (30.06 vs. 8.65 min) and ten continuous single stitches (19.84 vs. 6.51 min). Similarly, there was an increase in the “good quality” of the stitches and the suture pattern from 36.36% to 63.63%. Conclusion: By achieving these objectives, this guide aims to empower low-income hospitals and neurosurgery residents with the necessary resources and knowledge to establish and operate an affordable microsurgery laboratory, ultimately enhancing the quality of microsurgical training and patient care in low-income countries.

High-Precision Manufacture and Alignment of Image Slicer Based on Thin Glass Bonding

Integral field spectroscopy (IFS) is capable of simultaneously collecting two-dimensional high-resolution spatial image information and spectral information in a target field of view (FOV). The image slicer is the key element in IFS for segmenting the target FOV. Current micro-image slicer fabrication methods such as molecular assembling need strictly accurate control during sticking, which is time-consuming and expensive. In this study, we improved a direct-adhesive method for thin glass slicer manufacture and alignment. Thin glass is fabricated via single polishing and direct stitching to form a micro-image slicer. Based on charge coupled device (CCD) camera tests on parallel light, the manufacture accuracy for a six-channel image slicer reaches that of the molecular assembling scheme. This method can be applied to the fabrication of image slicers with different apertures.

Headband technique of reimplantation of a partially amputed finger: a first reported in literature

Background: Reimplantation of a partially amputee finger is a challenging task especially in resource limited country like India. In most of the scenario it lands in total amputation either due to delay in arrival at operative set up or due to lack of plastic surgery facility. Methods: We developed an innovative approach (1st reported in literature) of “headband technique “of reimplantation of such partially amputee fingers and toes. Partially amputee fingers and toes with viability were selected for the operative treatment and for the study. The study was conducted from January 2020 to 2021 with a follow up period for 6 months at our institution. The innovative suturing technique involved a single stitch at the tip of the pulp and rest on adjacent to nail bed securing the neurovascular structures. The patient was in age group of 9 months to 94 years, mostly traumatic injury, with 40 male and 15 female patients. Patients who reported with fully amputee fingers, black escharotic finger were excluded from the study. Results: To our accomplishment out of 55 operated patients, more than 50 have fully recovered. Conclusions: With this simple technique of reimplantation even doctor at PHC’S can save fingers from getting amputed. Our study is with small number of patients; hence we advocate a larger study for to have conclusive evidence for the same.

P87: Fracture Of A Dual Lumen Protekduo Cannula With Ventricular Perforation And Tamponade In A Recovery COVID-19 Patient

Background: In the absence of formal registry data anecdotal reports of cannula complications provide the only mechanism of risk assessment in the extended use of short term mechanical circulatory support devices. We report an unrecognized cannula fracture with perforation of the right ventricular apex and subsequent tamponade at the time of de-cannulation. Methods and Results: Patient is a 38 yo AAF with a history of asthma diagnosed with COVID 19 (nasal PCR) and admitted to an OSH with hypoxia (O2 sat 70%) and progressive dyspnea on exertion requiring HFNC and subsequent deployment of a right internal jugular 29 Fr Protek-DUO double lumen cannula with in-line oxygenator for venovenous ECMO respiratory support. After 36 days of VV ECMO support and mechanical ventilation, the patient was transferred with a diagnosis of COVID ARDS for transplant evaluation. Fourteen days post-transfer the patient was ambulatory and no longer required mechanical ventilation. No flow related issues were noted during the entire period of ECMO support (flow 2.8 to 3.4 L/min, delta P 20 mmHg or less, single oxygenator exchange on ECMO day 38). On ECMO day 67 the patients CxR was clear (Figure 1) and the RIJ cannula was removed without complication. Approximately two minutes after cannula removal the patient became unresponsive with tachycardia and hypotension (SBP 60 mmHg) which initially responded to volume resuscitation. With progressive loss of systolic blood pressure chest compressions were started with complete hemodynamic collapse. A transthoracic ECHO suggested tamponade and the chest was opened at the bedside demonstrating a chronic appearing hematoma with blood extravasation at the apex of the right ventricle (Figure 2). Bleeding was controlled with a single prolene stitch. Subsequent examination of the cannula demonstrated a fracture in the wire reinforced cannula at the point where the catheter transitioned from the apical RV into the RVOT (Figure 3). Conclusion: Given the progressive pulmonary hypertension frequently seen with prolonged COVID ECMO support, the RA to PA dual-lumen cannula has proven an effective MCS strategy (1) with survival advantage when compared to standard VV ECMO support (2). The Protek-DUO cannula was not designed for prolonged ambulatory MCS (> 60 days). Given the recent report of a seemingly identical cannula fracture event (3), clinicians should be aware of the potential for cannula fracture over time. Literature Cited (1) Mustafa AK, et al. (2020) ECMO for patients with COVID-19 in severe respiratory failure. JAMA Surg 155(10):990-992. (2) Saeed O, et al (2022) Outcomes by cannulation method for venovenous ECMO during COVID-19: a multicenter retrospective study. 46(8):1659-1668. doi: 10.1111/aor.14213. (3) Odish MF, et al (2022) Fracture right atrial-pulmonary artery cannula (Protek-DUO) in a 164-day extracorporeal membrane oxygenation bridge to lung transplant. doi: 10.1097/MAT.0000000000001879. Online ahead of print.

OC-031 TROCAR SITE INCISIONAL HERNIA PREVENTION BY ONLAY MESH PLACEMENT, NOT WHAT WAS EXPECTED

Abstract Aim The prevalence of Trocar site incisional hernia (TSIH) might be as high as 30%, due to this reason is paramount to find a better closure technique. Our aim is to test the TSIH preventive effect of the placement of an onlay mesh versus the standard fascial closure at the umbilical trocar site closure. Material&Methods We designed a Two-Center Randomized Controlled Trial where adult participants presenting for elective laparoscopic cholecystectomy, were allocated into 2 groups (Prosthesis and Control). The Hasson technique was the pneumoperitoneum creation technique. The procedure in the Prosthesis group consisted in the complete closure of the umbilical vertical section of the aponeurosis by single 0 Polydioxanone stitches, a 2cm onlay plane dissection, the placement of a lightweight, large-pore synthetic mesh and its fixation applying cyanoacrylate glue, subcutaneous stitches, and skin staplers. The Control group aponeurosis was closed by single stitches of Polydioxanone followed by skin staplers. An ultrasound scan was performed at 12 postoperative months. Results At 12-month control, a 41.7% incidence of TSIH was recorded in the Prosthesis group while 28.5% in the control group. 6 patients developed a superficial wound infection at the umbilical port site in the Prosthesis group, and none in the Control group. 5 of the patients had to be operated for mesh removal as they developed 4 chronic infections and 1 seroma with bad wound pain control. Conclusions The preliminary results of the study show no benefit in the Prosthesis group for the prevention of TSIH and presented with a greater number of complications.

Refining the NobleStitch PFO closure technique using an anatomy-tailored approach.

Key Points Patent foramen ovale (PFO) tunnel width and length can help predict successful closure after NobleStitch. A maximal tunnel width/shortest length ratio ≤0.61 is a good predictor of a significant (grade 2–3) residual right‐left shunt after a single stitch at follow‐up. Consideration of using two stitches for patients with large and/or short PFO tunnels should be made at the index procedure.

Labral Pull-Through Technique for Arthroscopic Labral Reconstruction of the Hip

Background: The goal of hip labral reconstruction is to restore the suction seal, requiring the labral graft to be precisely secured along the acetabular rim. When performed arthroscopically, controlling the graft as it is suspended in the hip joint between 2 cannulas can be challenging, making fixation in the optimal position to restore the suction seal difficult to achieve. Indications: Labral reconstruction/augmentation is indicated for patients with a deficient/dysfunctional labrum when repair alone cannot restore/maintain the suction seal. Technique Description: Following diagnostic arthroscopy, debridement, and measurement of the labral deficiency (30 mm), 70 mm tibialis anterior allograft was tubularized with a whipstitch and prepared with long suture tails at both ends and a single mattress stitch placed through the graft at the medial end. Holes for the anchors were pre-drilled. Viewing from the anterolateral portal, the graft was introduced down a sled through the modified anterior portal, pulled through the joint, and guided into the posterolateral portal cannula via instrumentation through the distal anterolateral accessory portal. With initial fixation achieved medially with the mattress stitch, directing the graft into position while achieving optimal coverage of the deficient area was facilitated by the excess graft length pulled into the posterolateral portal cannula. Results: Labral reconstruction can restore the suction seal of the hip joint when repair alone is not sufficient. Comparative studies with matched repair cohorts have demonstrated comparable survivorship and patient-reported outcomes between groups, with similar rates of patient acceptable symptomatic state and minimal clinically important difference between groups, and similar rates of return to sport in high-level athletes. Recent systematic reviews have largely corroborated these findings. Discussion/Conclusions: Arthroscopic labral reconstruction is an effective treatment option when repair alone cannot restore the suction seal when the graft is secured in an optimal position, but controlling the graft during passage and fixation while achieving a final length spanning the segmental deficiency in continuity with native tissue at both ends can present technical challenges. The labral pull-through technique greatly facilitates this process. Patient Consent Disclosure Statement: The author(s) attests that consent has been obtained from any patient(s) appearing in this publication. If the individual may be identifiable, the author(s) has included a statement of release or other written form of approval from the patient(s) with this submission for publication.

Incidental damage of obturator nerve during laparoscopic pelvic lymphadenectomy in endometrial cancer – Demonstration of a successful repairing procedure

ObjectiveIn order to highlight the importance of intraoperative complications and their management, we demonstrate a video of an iatrogenic left obturator nerve lesion during a pelvic lymphadenectomy for endometrial cancer staging. The repair was promptly performed using an intracorporeal laparoscopic suture for an end-to-end tension-free nerve anastomosis. DesignStepwise demonstration of the technique with narrated video footage. SettingA 70-year-old woman with a stage IB grade I endometrial adenocarcinoma was submitted to a surgical laparoscopic staging with total hysterectomy(TH), bilateral adnexectomy(BA), and bilateral pelvic and lomboaortic lymphadenectomy. After an uneventful retroperitoneal lomboaortic lymphadenectomy, the left paravesical space was dissected until the obturator fossae and a left pelvic lymphadenectomy followed, during which the left obturator nerve was accidentally transected with LigaSure™. InterventionsA careful inspection revealed an almost complete transection (80%) of the nerve, with both proximal and distal cut ends identifiable and no fraying of the edges. The thickness of the non-sectioned nervous portion was less than 3 mm, but a tension-free reattachment of both edges seemed manageable. The edges were oriented towards each other and a single stitch suture was placed using a 5–0 prolene, providing an epineural end-to-end coaptation. To reinforce the suture, a Fibrin sealant Tissucol® was applied. The contralateral pelvic lymphadenectomy was then performed, followed by TH and BA. The pieces were removed through the vagina using an endobag. The patient was discharged on the second postoperative day. During the follow-up, there were no signs of diminished adductor function, and neither there was any other detectable residual neuropathy or neurologic deficit involving the left thigh. ConclusionIt is crucial to identify intraoperative complications and to develop abilities to manage them. This video proves that it is possible to repair a transected obturator nerve using laparoscopy, when performed by an experienced onco-gynecologist, with extremely good functional results.

Management of paraesophageal hiatus hernia: recommendations following a European expert Delphi consensus

AimsThere is considerable controversy regarding optimal management of patients with paraesophageal hiatus hernia (pHH). This survey aims at identifying recommended strategies for work-up, surgical therapy, and postoperative follow-up using Delphi methodology.MethodsWe conducted a 2-round, 33-question, web-based Delphi survey on perioperative management (preoperative work-up, surgical procedure and follow-up) of non-revisional, elective pHH among European surgeons with expertise in upper-GI. Responses were graded on a 5-point Likert scale and analyzed using descriptive statistics. Items from the questionnaire were defined as “recommended” or “discouraged” if positive or negative concordance among participants was > 75%. Items with lower concordance levels were labelled “acceptable” (neither recommended nor discouraged).ResultsSeventy-two surgeons with a median (IQR) experience of 23 (14–30) years from 17 European countries participated (response rate 60%). The annual median (IQR) individual and institutional caseload was 25 (15–36) and 40 (28–60) pHH-surgeries, respectively. After Delphi round 2, “recommended” strategies were defined for preoperative work-up (endoscopy), indication for surgery (typical symptoms and/or chronic anemia), surgical dissection (hernia sac dissection and resection, preservation of the vagal nerves, crural fascia and pleura, resection of retrocardial lipoma) and reconstruction (posterior crurorrhaphy with single stitches, lower esophageal sphincter augmentation (Nissen or Toupet), and postoperative follow-up (contrast radiography). In addition, we identified “discouraged” strategies for preoperative work-up (endosonography), and surgical reconstruction (crurorrhaphy with running sutures, tension-free hiatus repair with mesh only). In contrast, many items from the questionnaire including most details of mesh augmentation (indication, material, shape, placement, and fixation technique) were “acceptable”.ConclusionsThis multinational European Delphi survey represents the first expert-led process to identify recommended strategies for the management of pHH. Our work may be useful in clinical practice to guide the diagnostic process, increase procedural consistency and standardization, and to foster collaborative research.

Utilization of Merge-Sorting Method to Improve Stitching Efficiency in Multi-Scene Image Stitching

Aiming at the problem of single stitching scenes (ordered or disordered images), which are time-consuming and involve complex computation during the image stitching, a multi-scene image stitching method based on merge sorting is proposed called merge-sorting image stitching (MSIS). We established an image stitching model based on merge sorting, directly stitching the matched images without traversing all the images and sorting them. Compared with the traditional method, this method significantly reduces the computational time taken matching irrelevant image pairs and improves the efficiency of image registration and stitching. The experimental results show that, compared with the binary tree-based model, our method reduces the time required to complete image stitching by about 10% and the distortion of the stitched images.

Krackow Stitch and Whipstitch Use in Distal Biceps Tendon Rupture Repair: A Porcine Composite Bone Biomechanical Study.

The suture combination of a Krackow stitch plus a whipstitch can be used to strengthen a tendon rupture repair. We compared biomechanical outcomes of suture repair techniques for distal biceps tendon ruptures using a single Krackow stitch with and without a whipstitch and a whip-stitch alone. Data were obtained from 36 thawed porcine flexor profundus tendons. A cortical button was secured to fourth-generation composite bone using No. 2 FiberWire (Arthrex) and No. 2 FiberLoop (Arthrex). The primary outcome was maximum load to failure. Secondary outcomes were displacement at the bone-tendon interface, total construct elongation, and stiffness. The Krackow plus whipstitch group (mean, 493.82 N; SD, 209.44 N) had a greater maximum load to failure as compared with the single Krackow group (mean, 333.71 N; SD, 172.32 N) (P=.01) and single whipstitch group (mean, 207.27 N; SD, 66.42 N) (P<.001). The single Krackow group (mean, 1.67 mm; SD, 0.89 mm) had a greater bone-tendon interface displacement (P=.01) after preloading and before cyclic loading than the single whipstitch group (mean, 0.83 mm; SD, 0.58 mm). There were no other secondary outcome differences between groups. A repair using Krackow plus whipstitch is biomechanically stronger with no difference in bone-tendon interface displacement, total construct elongation, or stiffness when compared with a single Krackow or single whipstitch. We recommend this repair technique for distal biceps tendon rupture repair, which may accelerate rehabilitation and decrease re-rupture rate. [Orthopedics. 2023;46(4):224-229.].

Endoluminal Suture-technique for the Stomach Closure of an Experimental Model.

In the modern minimally invasive era, diagnostic and therapeutic endoscopic interventions are one of the most emerging fields. For the new operational techniques, it is a major aim to develop reliable instruments, such as suturing devices for flexible endoscopes. The aim of this study was to assess the feasibility of a safe and reproducible suturing technique with an endoluminal suturing device. The evaluation of the technique was performed in twenty explanted special prepared porcine stomachs. Three different techniques were compared, single stitches, figure-of-eight, or Z-pattern and running sutures in terms of suturing time and bursting pressure. After verification of the reliability of the method, a 3 cm long full thickness incision on the stomach was closed with the endoscopic suturing device in four surviving animals. In our ex vivo studies, we have shown that the figure of 8 or Z- technique is the most optimal for stomach closure without considerable time-cost, thus this technique was chosen as the standard method for the in vivo study. The endoscopic stomach wall suturing was successful in all four cases, the postoperative period was uneventful and ended on the tenth postoperative day with autopsy. With the applied suturing device, the endoscopic suturing of the stomach is safe and reproducible, thus a human application may also be justified.