Single-phase Grid-connected Inverter Research Articles

Study of the Effects of Inductor Nonlinear Behavior on the Performance of Current Controllers for Single-Phase PV Grid Converters

Resonant and repetitive controllers are well suited for single-phase grid-connected inverters due to their optimum tracking and harmonic rejection capability. In particular, in this paper, their application for single-phase photovoltaic systems is considered. The effects of nonlinear inductance on the performance of current controllers designed to track periodic signals and/or to compensate periodic disturbances are investigated. When the inductance has a nonlinear behavior, a distorted current waveform is produced. Two different nonlinearities have been considered: saturation for high currents and a light nonlinearity, which occurs in the first portion of the magnetization curve, for low currents. A current-dependent model of the nonlinear inductance has been developed. It is mathematically based on the Volterra-series expansion, and it allows us to prove how the harmonic compensation provided by resonant and repetitive controllers can also mitigate the effects of the inductance saturation. This result is the main contribution of this paper, and it is also substantiated with experimental evidence. Moreover, the repetitive controller is able to comply with the harmonic limits reported in IEEE 1547 and IEC 61727, even in very hard saturation conditions.

단상 인버터를 이용한 새로운 태양광 에너지 변환 시스템 구현

본 논문은 새로운 태양광 에너지 변환 기술에 의한 연계형 단상 인버터 제어기술을 나타내었다. 최대전력 점 추적제어는 두 부스터 컨버터의 MOSFET 스위치 제어 발생회로에 기초하고 단상 인버터는 풀 브리지의 4개 IGBT 스위치에 의해 전류 추종제어 된다.<BR> PV 모듈의 발생전력 제어회로는 PV 모듈의 출력 전압, 전류 검출에 의해 최대전력 점 제어한다.<BR> 결국 PV 모듈 양단은 인버터 입력전압으로 낮은 리플 전압을 유지하고 출력은 증가한다.<BR> 제안한 태양광 인버터 시스템의 효과가 시뮬레이션과 실험을 통하여 입증되었다.

A Review of Single-Phase Grid-Connected Inverters for Photovoltaic Modules

This review focuses on inverter technologies for connecting photovoltaic (PV) modules to a single-phase grid. The inverters are categorized into four classifications: 1) the number of power processing stages in cascade; 2) the type of power decoupling between the PV module(s) and the single-phase grid; 3) whether they utilizes a transformer (either line or high frequency) or not; and 4) the type of grid-connected power stage. Various inverter topologies are presented, compared, and evaluated against demands, lifetime, component ratings, and cost. Finally, some of the topologies are pointed out as the best candidates for either single PV module or multiple PV module applications.

Power Quality From Multiple Grid-Connected Single-Phase Inverters

This paper reports on a study into the aggregate power quality from multiple grid connected inverters. Measurements are presented for individual single-phase inverters generating into the low voltage network under a range of operational conditions, and for groups of similar converters connected at the same point on the network. Some results from the modeling of multiple inverter interaction are also presented. Particular attention is given to power factor, the harmonic content of the generated currents, and dc injection.

Combined switching harmonics from multiple grid-connected single-phase inverters

The paper is concerned with the manner in which random phase harmonics, and in particular switching harmonics, caused by multiple devices connected to a common single phase supply, combine. Simple cancellation rules are suggested based on probabilistic integrals and Monte Carlo simulation. The analysis is general in that it applies equally to harmonics of all orders (of the fundamental) and to both current sources (generators) and sinks (loads). Formulas for both equal and unequal harmonic magnitudes are presented.