Single Flight Research Articles

Investigating dispersal abilities of Aphrophoridae in European temperate regions to assess the threat of potential Xylella fastidiosa-based pathosystems

Modeling the potential spread of Xylella fastidiosa can document contingency plans in northern Europe, so far uncolonized by the bacterium. Through mark–release–recapture (MRR) and flight-mill experiments, the flight capacity of two potential vectors for temperate Europe was studied: Philaenus spumarius, the reported southern European vector, and Aphrophora salicina, a xylem-specialist feeding on potential host plants of X. fastidiosa. Aphrophora salicina displayed significantly better flight performances than P. spumarius. In flight-mills, the average distance flown was, respectively, 623 m vs. 102 m and the maximal distance flown was 6.16 km vs. 1.54 km in 2.5 h. In MRRs, A. salicina travelled more than 30 m in a single flight, with a maximal interception distance of 80 m after two days, highlighting that dispersal is driven by connectivity and host plant quality. Philaenus spumarius mainly jumped, with 1 m movements in length and a maximal interception distance of 32 m in 27 days. Models estimated P. spumarius' daily mean dispersal at 1.5 m and A. salicina's at 3.5 m. Although only a small part of the population moves over very long distances, this pool of efficient insects could already be sufficient to effectively spread an epidemic. As Salicaceae have been reported as host plants of the bacterium, the association of Aphrophoridae and Salicaceae in riparian areas could create bacterium reservoirs in corridors allowing for transportation over medium to long distances.

Investigation of Measurement Accuracy of Bridge Deformation Using UAV-Based Oblique Photography Technique.

This paper investigates the measurement accuracy of unmanned aerial vehicle-based oblique photography (UAVOP) in bridge deformation identifications. A simply supported concrete beam model was selected and measured using the UAVOP technique. The influences of several parameters, such as overall flight altitude (h), local shooting distance (d), partial image overlap (λ), and arrangement of control points, on the quality of the reconstructed three-dimensional (3D) beam model, were presented and discussed. Experimental results indicated that the quality of the reconstructed 3D model was significantly improved by the fusion overall-partial flight routes (FR), of which the reconstructed model quality was 46.7% higher than those with the single flight route (SR). Despite the minimal impact of overall flight altitude, the reconstructed model quality prominently varied with the local shooting distance, partial image overlap, and control points arrangement. As the d decreased from 12 m to 8 m, the model quality was improved by 48.2%, and an improvement of 42.5% was also achieved by increasing the λ from 70% to 80%. The reconstructed model quality of UAVOP with the global-plane control points was 78.4% and 38.4%, respectively, higher than those with the linear and regional control points. Furthermore, an optimized scheme of UAVOP with control points in global-plane arrangement and FR (h = 50 m, d = 8 m, and λ = 80%) was recommended. A comparison between the results measured by the UAVOP and the total station showed maximum identification errors of 1.3 mm. The study’s outcomes are expected to serve as potential references for future applications of UAVOP in bridge measurements.

Insecticidal Management of Rangeland Grasshoppers Using a Remotely Piloted Aerial Application System

Grasshoppers are integral parts of rangeland ecosystems but also have the potential to reach population densities high enough (outbreaks) to cause serious economic damage from forage loss and affect adjacent crops. The objective of this study was to investigate the efficacy of treating grasshopper population hotspots with a liquid insecticide using a remotely piloted aerial application system (RPAAS), as opposed to fixed-wing aircraft, which is the most common method currently in use. A liquid insecticide, Sevin XLR PLUS (containing carbaryl), was applied on replicated 4.05-hectare (10-acre) plots with an RPAAS on a ranch in New Mexico. Our results demonstrated that Sevin XLR PLUS significantly suppressed grasshopper populations over a 14-day period (normalized population reduction was 79.11 ± 8.35% SEM) and quite rapidly (mostly by day 3) compared to untreated controls. These results are comparable to those achieved with fixed-wing aircraft. The RPAAS covered the whole test area in a single flight in approximately 5 min, making these population hotspot treatment applications relatively rapid, potentially more cost-effective, and more targeted in comparison to fixed-wing aircraft. Before adoption as an application method option, further research is recommended on using an RPAAS to cover larger areas in combination with using diflubenzuron-based insecticides, which are often preferred.

Time-coordination entry guidance using a range-determined strategy

A time-coordination entry guidance method based on a range-determined strategy is developed for hypersonic glide vehicles. This method is composed of two components: a time-constrained entry guidance algorithm and a coordinated flight time generation approach. Different from the previous work, the proposed strategy provides a novel scheme to solve the coordinated entry guidance problem, significantly reducing the computational load and the coupling between flight time control and the motion form. Firstly, the longitudinal guidance algorithm generates the flight profile based on the flight time constraint while considering adaptability to external disturbance. The magnitude of the bank angle and the range-to-go command can be derived from the profile. The command is used to plan the lateral trajectory represented by the Bézier curve in lateral guidance. Then, the heading error corridor can be established according to the line-of-sight between the vehicle and the reference point on the lateral trajectory, which controls the bank angle reversal time. The profile and the lateral trajectory are updated to guide the vehicle to the terminal point while meeting terminal and path constraints. This paper discusses how to estimate the adjustable range of a single vehicle's flight time and illustrates an approach for multi-vehicle coordinated flight time generation. Numerical simulations are conducted in nominal and dispersed conditions, and the results demonstrate the method's efficiency and robustness.

Migratory routes, breeding locations and multiple non-breeding sites of Common Whitethroats Curruca communis revealed by geolocators.

Understanding general migration characteristics and how breeding and non-breeding sites are connected is crucial for predicting the response of long-distance migratory bird populations to environmental changes. We use data collected from six geolocators to describe migratory routes and identify breeding and non-breeding locations, migratory behaviour and differences between spring and autumn migration of Common Whitethroats Curruca communis, an Afro-Palearctic migrant, wintering in Nigeria. Most individuals departed on spring migration in April, following a north-easterly direction, arriving at their breeding grounds across central-eastern Europe (~425,000 km2) in May. Departures from breeding grounds took place between July and August in a south-westerly direction. During spring migration individuals travelled longer distances at faster rates making its overall duration shorter than autumn migration. We suggest that, while Whitethroats can cross the Sahara Desert and Mediterranean Sea in a single flight, they are likely to refuel before and after crossing. Results indicate that Whitethroats undertook loop migration and visited two wintering sites: first in the Sahel, then in Nigeria, where they remained until spring migration. Geolocator results and data from the European Union for Bird Migration's (EURING) ringing database suggest that Whitethroats have a relatively high migratory spread-individuals from a single non-breeding site breed across a wide area of Europe. Our research is the first to track and describe the complete annual cycle of Whitethroats and one of the few studies to do so for any Afro-Palearctic migrant from non-breeding grounds. We identified the Sahel as an important refuelling and first wintering site indicating its conservation, alongside other stopover sites, is crucial for the species. We believe that changes in this region will have severe effects on a subset of individuals of specific European breeding populations, but these effects will greatly depend on the severity of the changes and at what spatial scale they occur.

Airborne SnowSAR data at X and Ku bands over boreal forest, alpine and tundra snow cover

Abstract. The European Space Agency SnowSAR instrument is a side-looking, dual-polarised (VV/VH), X/Ku band synthetic aperture radar (SAR), operable from various sizes of aircraft. Between 2010 and 2013, the instrument was deployed at several sites in Northern Finland, Austrian Alps and northern Canada. The purpose of the airborne campaigns was to measure the backscattering properties of snow-covered terrain to support the development of snow water equivalent retrieval techniques using SAR. SnowSAR was deployed in Sodankylä, Northern Finland, for a single flight mission in March 2011 and 12 missions at two sites (tundra and boreal forest) in the winter of 2011–2012. Over the Austrian Alps, three flight missions were performed between November 2012 and February 2013 over three sites located in different elevation zones representing a montane valley, Alpine tundra and a glacier environment. In Canada, a total of two missions were flown in March and April 2013 over sites in the Trail Valley Creek watershed, Northwest Territories, representative of the tundra snow regime. This paper introduces the airborne SAR data and coincident in situ information on land cover, vegetation and snow properties. To facilitate easy access to the data record, the datasets described here are deposited in a permanent data repository (https://doi.org/10.1594/PANGAEA.933255, Lemmetyinen et al., 2021).

A mathematical model for integrated aircraft and crew recovery after a disruption: a Benders’ decomposition approach

PurposeAirline scheduling is an extremely complex process. Moreover, disruption in a single flight may damage the entire schedule tremendously. Using an efficient recovery scheduling strategy is vital for a commercial airline. The purpose of this paper is to present an integrated aircraft and crew recovery plans to reduce delay and prevent delay propagation on airline schedule with the minimum cost.Design/methodology/approachA mixed-integer linear programming model is proposed to formulate an integrated aircraft and crew recovery problem. The main contribution of the model is that recovery model is formulated based on individual flight legs instead of strings. This leads to a more accurate schedule and better solution. Also, some important issues such as crew swapping, reassignment of aircraft to other flights as well as ground and sit time requirements are considered in the model. Benders’ decomposition approach is used to solve the proposed model.FindingsThe model performance is also tested by a case including 227 flights, 64 crew, 56 aircraft and 40 different airports from American Airlines data for a 24-h horizon. The solution achieved the minimum cost value in 35 min. The results show that the model has a great performance to recover the entire schedule when disruption happens for random flights and propagation delay is successfully limited.Originality/valueThe authors confirm that this is an original paper and has not been published or under consideration in any other journal.

Optical System Design of Oblique Airborne-Mapping Camera with Focusing Function

The use of airborne-mapping technology plays a key role in the acquisition of large-scale basic geographic data information, especially in various important civil/military-mapping missions. However, most airborne-mapping cameras are limited by parameters, such as the flight altitude, working-environment temperature, and so on. To solve this problem, in this paper, we designed a panchromatic wide-spectrum optical system with a focusing function. Based on the catadioptric optical structure, the optical system approached a telecentric optical structure. Sharp images at different object distances could be acquired by micro-moving the focusing lens. At the same time, an optical passive compensation method was adopted to realize an athermalization design in the range of −40–60 °C. According to the design parameters of the optical system, we analyzed the influence of system focusing on mapping accuracy during the focusing process of the airborne-mapping camera. In the laboratory, the camera calibration and imaging experiments were performed at different focusing positions. The results show that the experimental data are consistent with the analysis results. Due to the limited experiment conditions, only a single flight experiment was performed. The results show that the airborne-mapping camera can achieve 1:5000 scale-imaging accuracy. Flight experiments for different flight altitudes are being planned, and the relevant experimental data will be released in the future. In conclusion, the airborne-mapping camera is expected to be applied in various high-precision scale-mapping fields.

Flight dynamics of ski jumping: Wind tunnel testing and numerical modeling to optimize flight position

Ski jumping is a highly competitive sport, where the distance jumped is greatly dependent on the aerodynamic effects of the athlete’s posture. In the current paper a wind tunnel experiment was conducted to generate a parametric database of the effects of posture on aerodynamics and to compute the aerodynamic force coefficients. The parameters considered were varied over ranges representative of modern ski jumping and included the ski incidence angle, the ski V-angle, the leg-to-ski angle, and the hip angle. Measured force data were then used to simulate ski jumping flightpaths via a numerical model, allowing for the effects of posture on jump distance to be investigated. The model was able to simulate single and multi-posture flights to suggest both static and dynamic optimums. It was found that the ski jumping system generated lift in previously unreported, non-linear methods, enabling the flow to stay attached at much larger incidences than traditional wings. When optimizing posture for distance, it was found that neither lift nor efficiency (lift-to-drag ratio) should be maximized, due to the reliance on both qualities for a successful jump. However, when considering multi-posture flight, it was found that the lift-to-drag ratio should be maximized immediately after take-off, to maintain horizontal velocity. Lift should be maximized as the athlete approaches landing, due to the highly curved flightpath reducing the negative impact of drag. Realistic recommendations have been made on the postures that athletes should utilize to improve their performance. This includes a single position optimum, a “safe” optimum which allows some variation in an athlete’s ability to hold posture, and a further optimum should the athlete be skillful enough to dynamically alter posture as the jump progresses.

Change of community noise and noise impact with changes in air-taxi fleet compostitions over a longer period of time

Generic air vehicles are helping to understand effects specifically related to urban air mobility (UAM) noise. Air corridors were already studied, managing complex air-taxi traffic to reduce population's exposure to higher or critical noise levels in the vicinity of a highly frequented flight paths. The results still depend on fleet compositions, which may change over shorter or longer periods because future UAM carriers can select from a variety of different air-taxi types, in some cases strongly differing in their noise characteristics. Once an air-taxi-fleet is operated at a certain vertiport, its composition may not remain the same after one month or even after one year. This study is evaluating a long-term effect with changing fleets operated on the same flight paths in the same air corridor. Besides usual noise metrics like DNL, the results provide also a first insight how metrics like the dose-response may be affected over a longer period of time. 25 acoustically diverse air-taxis were distributed inside an 8 km wide air corridor, carrying 165 single flight tracks at 5 flight levels. Approximately 60,200 movements were simulated representing short-term effects, ten times more for mid-term scenarios, and finally a large number of 1,505,000 for the long-term study.

Use of the LunAero Open-Source Hardware Platform to Enhance the Accuracy and Precision of Traditional Nocturnal Migration Bird Counts.

Quantification of nocturnal migration of birds through moon watching is a technique ripe for modernization with superior computational power. In this paper, collected by a motorized telescope mount was data analyzed using both video observations by trained observers and modernized approaches using computer vision. The more advanced data extraction used the OpenCV library of computer vision tools to identify bird silhouettes by means of image stabilization and background subtraction. The silhouettes were sanitized and analyzed in sequence to produce stacked relationships between temporally close contours, discriminating birds from noise based on the assumption that birds migrate in stable paths. The flight ceiling of the birds was determined by extracting relevant correlation coefficient data from doppler radar co-located with the LunAero instrument in Norman, OK, USA using a method with low-computational overhead. The bird paths and flight ceiling were combined with lunar ephemera to provide input for the original method used for nocturnal migration quantification as well as an enhanced version of the same method with more advanced computational tools. We found that the manual quantification of migration activity detected 16,300 birds/km•h heading northwest from 110°, whereas the automated analysis reported a density of 43,794 birds/km•h heading northwest from 106.67°. Hence, there was agreement with regard to flight direction, but the automated method overestimated migration density by approximately three times. The reasons for the discrepancy between flight path detection appeared to be due to a substantial amount of noise in the video data as well as a tendency for the computer vision analysis to split single flight paths into two or more segments. The authors discuss ongoing innovations aimed at addressing these methodological challenges.

Unsteady aerodynamic analysis and effectiveness of bio-inspired flapping wings in V-formation flight

Several bird species have been observed to fly in V-formation, an arrangement which exploits aerodynamic features to allow the group to conserve energy when migrating over long distances without stopping and feeding. The use of such grouping arrangement and organized pattern has demonstrated longer endurance and less power consumption in comparison with single flights. In this work, a computationally efficient potential flow solver based on the unsteady vortex lattice method (UVLM) is employed to assess the aerodynamic performance of flapping wings in forward flight in terms of lift and thrust generation along with the propulsive efficiency. The UVLM has the capability to simulate incompressible and inviscid flows over moving thin wings where the separation lines are known a priori. A bio-inspired, albatross wing shape is considered and its aerodynamic performance in formation flights is compared against conventional elliptical and rectangular wing shapes. The aerodynamic analysis is carried out for different wing arrangements of 3-body and 5-body V-formations to determine the optimal spacing parameters leading to maximum propulsive efficiency. The simulation results reveal that, at the optimal formation angle and separation distance, the albatross-inspired wing shape produces the most lift over the flapping cycle, while the rectangular wing shape generates the most thrust over the flapping cycle. Furthermore, the optimal configuration in terms of propulsive efficiency is found to be a 5-body V-formation utilizing the albatross wing shape with a separation distance set to one-third of the span and a formation angle set to 139°. The present study provides guidance for the design of multi-flapping wing air vehicles based on the expected flight mission. The albatross wing shape is found to have superior capability in producing lift, while the elliptical wing shape is observed to consume less power. The rectangular wing shape is found to produce higher thrust and then can achieve faster forward motion.

Planning Algorithm for Route and Task Allocation of Plant Protection UAVs in Multiple Operating Areas

This paper takes the flying defense team as the operating unit and studies the route planning and tasks in the process of plant protection operations as system problems. In the route planning, the flight defense team’s operating time is used as the optimization goal of route planning. Taking the UAV battery and drug load as constraints, the flight mission is divided into subtasks that can be completed by a single UAV in a single flight. On this basis, the particle swarm algorithm is used to optimize the task allocation, so as to achieve the goal of UAV plant protection route and task division with minimum time loss. In order to verify the effectiveness of the method in this paper, 3 and 4 UAVs flying defense teams were used as the experimental objects, and experiments were carried out in large and small field groups. In terms of time consumption, the method in this paper is compared with the unit operation area method and the single size method. The energy consumption advantage is weaker than time consumption. In terms of time consumption, the method in this paper can greatly improve the efficiency of large-area operation areas. Compared with the unit operation area method, 3 drones can increase the efficiency by 58.98%, which is increased by 10.22% compared with the unit size method. The efficiency of 4 units can be increased by 58.08% compared with the unit operation area method, and the efficiency is increased by 10.22% compared with the unit size method.

Response analysis of solid missile grain in UAV-borne environment

Solid rocket motor of UAV-borne missile experiences the effect of cyclic temperature. For the single chamber double thrust rocket motor, the finite element model of the solid motor grain is established. Temperature field and stress-strain field under a mounted flight cycle are studied. The research results can provide reference for the structural integrity evaluation of the single chamber double thrust rocket motor and UAV flight system.

Revealing influence of meteorological conditions and flight factors on delays Using XGBoost

With the increasing demand for air transportation, the negative impact of flight delays has been paid more and more attention, especially in the hubs of large cities. By examining flight delay data and analyzing the main factors affecting flight delays, the causes of flight delays can be found and effectively avoided. In this paper, we collect meteorological data and flight data of New York’s John F. Kennedy International Airport (JFK), Laguardia Airport (LGA), and Newark Liberty International Airport (EWR). By consulting relevant data, we select the factors that may have a strong correlation with flight delays, and we simplify and classify the data. Based on the preliminary analysis of the relationship between a single factor and flight delays, we use XGBoost to predict and analyze flight delays. We find that: (1) the effect of a single feature on flight delays is limited; (2) departure time, carrier, and precipitation have a great influence on flight delays; and (3) the accuracy of the prediction results of the change of delay duration during flight is better than the departure delay and arrival delay. Our research results can help airports combine meteorological conditions and forecasts to arrange flights properly and reduce the rate of flight delays and the losses to airlines and passengers.

Analyzing Impact of Types of UAV-Derived Images on the Object-Based Classification of Land Cover in an Urban Area

The development of UAV sensors has made it possible to obtain a diverse array of spectral images in a single flight. In this study, high-resolution UAV-derived images of urban areas were employed to create land cover maps, including car-road, sidewalk, and street vegetation. A total of nine orthoimages were produced, and the variables effective in producing UAV-based land cover maps were identified. Based on analyses of the object-based images, 126 variables were derived by computing 14 statistical values for each image. The random forest (RF) classifier was used to evaluate the priority of the 126 variables. This was followed by optimizing the RF through variable reduction and by comparing the initial and optimized RF, the utility of the high-priority variable was evaluated. Computing variable importance, the most influential variables were evaluated in the order of normalized digital surface model (nDSM), normalized difference vegetation index (NDVI), land surface temperature (LST), soil adjusted vegetation index (SAVI), blue, green, red, rededge. Finally, no significant changes between initial and optimized RF in the classification were observed from a series of analyses even though the reduced variables number was applied for the classification.

Multiple UAV Flights across the Growing Season Can Characterize Fine Scale Phenological Heterogeneity within and among Vegetation Functional Groups

Grasslands and shrublands exhibit pronounced spatial and temporal variability in structure and function with differences in phenology that can be difficult to observe. Unpiloted aerial vehicles (UAVs) can measure vegetation spectral patterns relatively cheaply and repeatably at fine spatial resolution. We tested the ability of UAVs to measure phenological variability within vegetation functional groups and to improve classification accuracy at two sites in Montana, U.S.A. We tested four flight frequencies during the growing season. Classification accuracy based on reference data increased by 5–10% between a single flight and scenarios including all conducted flights. Accuracy increased from 50.6% to 61.4% at the drier site, while at the more mesic/densely vegetated site, we found an increase of 59.0% to 64.4% between a single and multiple flights over the growing season. Peak green-up varied by 2–4 weeks within the scenes, and sparse vegetation classes had only a short detectable window of active phtosynthesis; therefore, a single flight could not capture all vegetation that was active across the growing season. The multi-temporal analyses identified differences in the seasonal timing of green-up and senescence within herbaceous and sagebrush classes. Multiple UAV measurements can identify the fine-scale phenological variability in complex mixed grass/shrub vegetation.

Assessment of Age, Gender, Mating Status, and Size on Single and Repeat Flight Capabilities of Heilipus lauri Boheman (Coleoptera: Curculionidae)

Heilipus lauri Boheman (Coleoptera: Curculionidae) is a specialist pest of avocado fruit and is considered an incursion risk for U.S. avocado producers. At the time work reported here was undertaken the flight capabilities of H. lauri were unknown. Consequently, proactive studies were undertaken to quantify aspects of this pest’s flight capabilities to inform potential future control efforts. Flight mill studies were conducted in a quarantine laboratory to measure the dispersal capacity of H. lauri with respect to gender, mating status, and size on the single and repeat flight capabilities of weevils. Gender, mating status, and size did not significantly affect measured flight parameters. Average total distances flown and flight velocity, and mean maximum flight bout distances and durations significantly declined as weevil age increased and when weevils engaged in repeat flights. Survivorship rates were significantly reduced as the number of successive flights undertaken increased. The distribution of total average flight distances flown and total cumulative flight distances flown was platykurtic. The implications of these findings are discussed in terms of developing incursion management plans.

Steady-State Fault Detection with Full-Flight Data

Aircraft engine condition monitoring is a key technology for increasing safety and reducing maintenance expenses. Current engine condition monitoring approaches use a minimum of one steady-state snapshot per flight. Whilst being appropriate for trending gradual engine deterioration, snapshots result in a detrimental latency in fault detection. The increased availability of non-mandatory data acquisition hardware in modern airplanes provides so-called full-flight data sampled continuously during flight. These datasets enable the detection of engine faults within one flight by deriving a statistically relevant set of steady-state data points, thus, allowing the application of machine-learning approaches. It is shown that low-pass filtering before steady-state detection significantly increases the success rate in detecting steady-state data points. The application of Principal Component Analysis halves the number of relevant dimensions and provides a coordinate system of principal components retaining most of the variance. Consequently, clusters of data points with and without engine fault can be separated visually and numerically using a One-Class Support Vector Machine. High detection rates are demonstrated for various component faults and even for a minimum instrumentation suite using synthesized datasets derived from full-flight data of commercially operated flights. In addition to the tests conducted with synthesized data, the algorithm is verified based on operational in-flight measurements providing a proof-of-concept. Consequently, the availability of continuously sampled in-flight measurements combined with machine-learning methods allows fault detection within a single flight.

The Pacific as the world’s greatest theater of bird migration: Extreme flights spark questions about physiological capabilities, behavior, and the evolution of migratory pathways

AbstractThe Pacific Basin, by virtue of its vastness and its complex aeroscape, provides unique opportunities to address questions about the behavioral and physiological capabilities and mechanisms through which birds can complete spectacular flights. No longer is the Pacific seen just as a formidable barrier between terrestrial habitats in the north and the south, but rather as a gateway for specialized species, such as shorebirds, to make a living on hemispherically distributed seasonal resources. This recent change in perspective is dramatic, and the research that underpins it has presented new opportunities to learn about phenomena that often challenge a sense of normal. Ancient Polynesians were aware of the seasonal passage of shorebirds and other landbirds over the Pacific Ocean, incorporating these observations into their navigational “tool kit” as they explored and colonized the Pacific. Some ten centuries later, systematic visual observations and tracking technology have revealed much about movement of these shorebirds, especially the enormity of their individual nonstop flights. This invites a broad suite of questions, often requiring comparative studies with bird migration across other ocean basins, or across continents. For example, how do birds manage many days of nonstop exercise apparently without sleep? What mechanisms explain birds acting as if they possess a Global Positioning System? How do such extreme migrations evolve? Through advances in both theory and tracking technology, biologists are poised to greatly expand the horizons of movement ecology as we know it. In this integrative review, we present a series of intriguing questions about trans-Pacific migrant shorebirds and summarize recent advances in knowledge about migratory behavior operating at temporal scales ranging from immediate decisions during a single flight, to adaptive learning throughout a lifetime, to evolutionary development of migratory pathways. Recent advances in this realm should stimulate future research across the globe and across a broad array of disciplines.