X-ray Crystallography Research Articles

Corannulene-based Quintuple [6]/[7]helicenes: Well-preserved Bowl Core, Inhibited Bowl Inversion and Supramolecular Assembly with Fullerenes.

Herein, corannulene-based quintuple [6]helicenes (Q[6]H-1 andQ[6]H-2) and [7]helicene (Q[7]H) were synthesized via penta-fold Heck and Mallory reaction. Notably, Q[7]H represents the highest reported helicene based on corannulene. X-ray crystallography reveals that Q[6]H-2 adopts a propeller-shaped conformation with a well-preserved corannulene core, while Q[6]H-1 and Q[7]H exhibit quasi-propeller-shaped conformations. Upon heating, conformer Q[6]H-1 undergoes conversion to the thermodynamically more stable conformer Q[6]H-2, whereas conformer Q[7]H remains unchanged due to larger steric congestion. Racemization of the enantiomer of Q[6]H-1 and conformational conversion were observed simultaneously at elevated temperature, with DFT studies indicating a racemization barrier of 28.64 kcal·mol-1. In contrast, the racemization barrier for Q[6]H-2 was calculated to be 45.46 kcal·mol-1, indicating exceptional chiral stability. Surprisingly, the bowl inversions of Q[6]H-1 and Q[6]H-2 conformers are somewhat inhibited by the helical blades, whereas this was not observed for other possible conformers of Q[6]H. These results first demonstrated that subtle conformational variations can lead to significant changes in chiral stability and bowl inversions of multihelicenes. Due to the well-preserved corannulene core, propeller-shaped conformation and electron complementarity, Q[6]H-2 can recognize fullerenes in both solution and solid state, which is a rare instance of co-crystallization assembly between multiple helicenes and fullerenes.

Cold and Liquid Crystal Properties of Square-Planar Copper(II) Versus Nickel(II)- Iminophenolate/Naphthalen-2-Olate Schiff Base Complexes.

Reaction of the phenolate or naphthalen-2-olate based Schiff base ligands, (E)-1-((2-ethylphenylimino)methyl)phenol (HL1) or (E)-1-((2-ethylphenylimino)methyl)naphthalen-2-ol (HL2) with nickel(II) and copper(II) acetate provides the complexes bis[(E)-1-((2-ethylphenylimino)methyl)phenolato-ĸ2N,O]Ni/Cu(II), [Ni(L1)2] (1) and [Cu(L1)2] (2), or bis[(E)-1-((2-ethylphenylimino)methyl)naphthalen-2-olato-ĸ2N,O]Ni/Cu(II), [Ni(L2)2] (3) and [Cu(L2)2] (4), respectively. Single crystal X-ray structure determinations for 1, 3 and 4 reveal N2,O2-metal coordination of two chelating Schiff base ligands in a square-planar geometry. Powder X-ray diffractograms confirm the phase purity of the bulk microcrystalline samples. Thermal analyses by differential scanning calorimetry (DSC) and polarized light microscopic (PLM) indicate the copper(II) complexes to exhibit cold crystal (2) and liquid crystal (4) property. Cyclic voltammograms suggest an irreversible electrochemical process with two one electron charge transfer processes in N,N-dimethylformamide. Variable temperature magnetic measurements at the solid-state prove the diamagnetic nature of the low-spin Ni2+ centres in 1 or 3, as expected from the square-planar coordination geometry with rather strong ligands. The complexes expose medium level of antioxidant activity in methanol. Optimized geometry and excited state property by DFT/TD-DFT correspond well to the experimental results of the electronic and molecular structure at the ground state.

Five Unreported Ketone Compounds—Penicrustones A–E—From the Endophytic Fungus Penicillium crustosum

Five unreported ketone compounds—penicrustones A–E—were isolated from the solid fermentation of the endophytic fungus Penicillium crustosum. Their structures were elucidated on the basis of extensive spectroscopic analysis. Their absolute configurations were determined via ECD calculations and single-crystal X-Ray crystallography. All compounds were evaluated for their antimicrobial and antitumor activities. Compounds 4 and 5 showed moderate inhibitory effects on Micrococcus luteus, with MIC values of 12.5 and 25.0 μg/mL, respectively. In addition to this, compound 4 also showed cytotoxicity on tumor cell lines KTC-1 and Hela, with IC50 values of 4.28 and 4.64 μg/mL, respectively.

VMXm - A sub-micron focus macromolecular crystallography beamline at Diamond Light Source.

VMXm joins the suite of operational macromolecular crystallography beamlines at Diamond Light Source. It has been designed to optimize rotation data collections from protein crystals less than 10 µm and down to below 1 µm in size. The beamline has a fully focused beam of 0.3 × 2.3 µm (vertical × horizontal) with a tuneable energy range (6-28 keV) and high flux (1.6 × 1012 photons s-1 at 12.5 keV). The crystals are housed within a vacuum chamber to minimize background scatter from air. Crystals are plunge-cooled on cryo-electron microscopy grids, allowing much of the liquid surrounding the crystals to be removed. These factors improve the signal-to-noise during data collection and the lifetime of the microcrystals can be prolonged by exploiting photoelectron escape. A novel in vacuo sample environment has been designed which also houses a scanning electron microscope to aid with sample visualization. This combination of features at VMXm allows measurements at the physical limits of X-ray crystallography on biomacromolecules to be explored and exploited.

Synthesis and properties of β-arylated triphyrins[2.1.1] by successive introduction of one to six aryl groups at the β-pyrrole carbons

The β-arylated meso-tetra(p-tolyl) triphyrins[2.1.1] containing two, three, and four p-fluorophenyl groups were synthesized by reacting appropriate β-bromo triphyrin[2.1.1] with p-fluorophenyl boronic acid in toluene/THF/H2O (1:1:1) at 80 οC for 8 h–12 h and their properties were compared with our previously reported β-arylated triphyrins[2.1.1] containing one and six p-fluorophenyl groups. The increase of the number of p-fluorophenyl groups at the β-pyrrole carbons induces steric hindrance at the periphery of triphyrin[2.1.1] that results in the alteration of electronic properties due to distortion in the macrocycle which is reflected in their structure, spectral and redox properties. The X-ray structure analysis revealed that β-di(p-fluorophenyl) meso-tetra(p-tolyl) triphyrin[2.1.1] was almost planar like meso-tetra(phenyl) triphyrin[2.1.1] whereas the β-hexa(p-fluorophenyl) meso-tetra(p-tolyl) triphyrin[2.1.1] was significantly distorted. The absorption spectra of β-arylated triphyrins[2.1.1] showed bathochromically shifted Soret and Q-bands with reduction in absorption coefficients and increase in the bandwidth compared to the β-unsubstituted meso-tetra(p-tolyl) triphyrin[2.1.1] and the maximum effects were noted for β-hexa(p-fluorophenyl) meso-tetra(p-tolyl) triphyrin[2.1.1]. The β-arylated meso-tetra(p-tolyl) triphyrins[2.1.1] are stable under electrochemical conditions and DFT/TD-DFT studies are in agreement with the experimental observations.

Analysis of the Physical and Chemical Composition of Sludge from the Water Treatment Plant

The properties and composition of the sludge generated in water treatment systems depend primarily on the type and composition of the water to be treated, the treatment methods, and the type and doses of chemical reactants. The sludge produced in the water treatment plant (WTP) under study follows the technological processes of coagulation, flocculation, sedimentation, and filtration. The analyses aimed to characterize the sludge in terms of its physico-chemical properties and classify it in terms of its potential discharge into the river and management. Four series of sediment tests were conducted over a calendar year (March, June, September and December), analysing selected parameters using various test methods, including the X-ray crystallography (XRF) method. The publication's authors showed that the sediment consists mainly of sand, clay, and silt particles with grain sizes ranging from 0.001 mm to 1 mm. Silica (53.78%), alumina (23.58%), calcium oxide (8.28%), iron (III) oxide (5.61%), and potassium oxide (2.36%) represent the main chemical constituents present in the sediment. The authors characterized the sediment in terms of the content of biogenic compounds: various forms of phosphorus and nitrogen, organic compounds – determined as total organic carbon (TOC), selected metals, and the content of individual elements (carbon, hydrogen, oxygen, nitrogen, sulfur). In addition, the sludge samples were also characterized in terms of calorific value, ash content, water content, and heat of combustion. Discharging WTP sludge into rivers, ponds, and lakes or storing dewatered sludge is an environmentally unfriendly form of disposal for this type of waste. The authors see the possibility of conducting further research on using WTP sludge in wastewater treatment, removing heavy metals from aqueous solutions, producing cement and construction materials, and recovering or recycling.

Non-alternant Benzodifluoranthene Tetraimides from 7,8,9,10-Fluoranthene Diimides: Synthesis, Structure, and Optical-Limiting Properties.

A novel tetraimide-functionalized non-alternant π-conjugated system, namely, benzodifluoranthene tetraimides (BDFTI), has been designed and synthesized through highly efficient UV-photocyclization of a vinyl-bridged fluoranthene diimide dimer (i.e., FDI-V). The synthesis of FDI-V starts from a straightforward three-step route to produce novel 7,8,9,10-fluoranthene diimide (FDIs) building-blocks, followed by nearly complete bromination and then Stille-coupling reaction to give the desired dimer. The analysis by X-ray crystallography confirms a near-coplanar geometry for FDIs, while BDFTI shows a U-shaped and distorted backbone configuration proven by theoretical optimizations. The tetraimide BDFTI exhibits several advantages over the FDI cores, including an extended absorption band and a red-shift in photoluminescence spectra. This enhancement can be attributed to the presence of additional electron-deficient imide units, which promotes increased intramolecular charge transfer and improved electron affinity. All the imides show a local aromatic characteristic owing to the incorporation of pentagon rings in the π-frameworks. The fully fused BDFTI exhibits nonlinear optical properties as analyzed by the open-aperture Z-scan technique, demonstrating superior optical-limiting performance compared to vinyl-bridged FDI-V. The versatile UV-photocyclization chemistries provide a pathway for developing complex and unique multiimide-functionalized π-conjugated systems, paving the way for creating high-performance optical-limiting materials.

Novel Crystalline Salts of 4-Piperidyl- and 4-Pyridylmethylamines Prepared by Catalytic Hydrogenation of 4-Pyridinecarbonitrile: Crystallographic Unit Cells Based on Powder XRD Patterns by Using the DASH Program Package

Structures of some hydrogenated products and intermediates, prepared by a heterogeneous Pd/C or Ru/C catalyst starting from 4-pyridinecarbonitrile (4PN), in water and in the presence of an acidic additive (HCl or H2SO4), were confirmed in various salt forms of 4-piperidylmethylamine (4PIPA) and 4-pyridylmethylamine (4PA). Crystallographic unit cell structure of the completely hydrogenated product salts (4PIPA·H2SO4 and 4PIPA·2HCl) showed a common double-protonated [4PIPA+2H]2+ divalent cation structure, also proved by FT-IR, and that of the 4PA·H2SO4 intermediate salt was also indexed and modeled by means of powder X-ray diffraction, applying the DASH 4.0 software package and crystal coordinates coming from former single-crystal X-ray structure determination. Formations of the anhydrous and hydrated forms of 4PA·0.5H2SO4·xH2O (x = 0 or x = 0.5, hemisulfates) were also studied by powder XRD and FT-IR spectroscopy for comparing these crystal structures.

Understanding Cation–Anion Ionic Bonding in Tetramethylammonium Salts: Insights from Density Functional Theory and X-ray Crystallography

Understanding Cation–Anion Ionic Bonding in Tetramethylammonium Salts: Insights from Density Functional Theory and X-ray Crystallography

Synthesis, Structure, and Optical Property of Tris(biaryldiyl)metal Complexes Consisting of Group 9 Elements.

We report the synthesis and characterization of tris(biphenyl-2,2'-diyl)metal complexes of trivalent group 9 elements (1M, M = Co, Rh, Ir) and their nonplanarly π-extended analogs, tris(1,1'-binaphthyl-2,2'-diyl)metal complexes (2M, M = Rh, Ir). Single crystal X-ray crystallography reveals the distorted octahedral geometry with an approximate C3 symmetry of trianionic complexes 1M (M = Co, Rh, Ir) and 2M (M = Rh, Ir), which are contacted by three Li+ ions in the crystal. Complex 1Ir exhibits yellow luminescence in THF with a photoluminescence quantum yield (ΦPL) of up to 0.73, along with a distinctive photophysical property, namely, a concentration dependence of the emission wavelength from 530 to 580 nm. This is a characteristic property of 1Ir and has not been observed in its isoelectronic analog, tris(2-phenylpyridinato)iridium(III) (Ir(ppy)3). The concentration-dependent optical properties originate from the dissociation equilibria of Li+ ions from the anionic chromophore. Complex 2Ir also exhibits luminescence at 715 nm in THF, with a notable bathochromic shift from 1Ir through the π-extension. The findings offer insights into the photophysical properties of homoleptic organo-transition metal complexes, providing the foundation for the design of related transition metal complexes.

Beautoide A, an Anti-Osteoclastogenic Sterol from Beauveria sp. NBUF147 Associated with an Irciniidae Sponge from the Marine Mesophotic Zone.

Mesophotic coral ecosystems (MCEs), located at depths ranging from 30-150 m, host some of the most diverse yet least explored marine bioresources, particularly significant for the discovery of new bioactive molecules. The fungus Beauveria sp. NBUF147, associated with an Irciniidae sponge from the mesophotic zone at a depth of 82 m, underwent chemical investigation that led to the identification of one new sterol, beautoide A (1), and one reported sterol, 3β,5α,9α-trihydroxy-(22E,24R)-ergosta-7,22-dien-6-one (2). Their structures were determined from analysis of spectroscopic data and X-ray crystallography. Evaluation of biological activity in prednisolone-induced osteoporotic zebrafish showed that 1 was anti-osteoclastogenic in vivo at 3.0 μM.

Revisiting the Cyclocephagenols via Astragalus condensatus: Structural Insights and Configurational Revision.

The phytochemical investigation of the MeOH extract of Astragalus condensatus roots led to the discovery of a new tetrahydropyran cycloartane-type triterpenoid, astracondensatol A (1), alongside six known cyclocephagenol derivatives (2, 3, 20, 32, 35, and 36). Elucidation of their structures involved 1D and 2D-NMR spectroscopy and mass data analysis. Upon comparing NMR spectroscopic data with prior literature, several carbon shift anomalies, particularly at C-24, prompted a reevaluation using quantum chemical calculations, resulting in the revision of the 24S to 24R absolute configuration for compound 2 and 38 other reported cyclocephagenol-type triterpenoids. X-ray crystallography data further supported the analysis in establishing the absolute configuration of compound 2. Ambiguous NOE correlations and publication bias could have played a significant role in miss-assigning the C-24 absolute configuration in tetrahydropyran cycloartane-type triterpenoids.

Palladium-Catalyzed Acetoxylation of γ-Dehydro-aryl-himachalene: The Synthesis of a Novel Allylic Acetoxylated Sesquiterpene and a π-Allyl Palladium(II) Complex

Allylic oxygenated derivatives of himachalenes are highly valued molecules due to their potential applications in perfumery, cosmetics, and pharmaceuticals. Previous attempts at catalyzed allylic oxidation of himachalenes led to the formation of a very stable η3-allyl palladium complex, preventing any further reaction development. Herein, we present the first successful palladium-catalyzed synthesis of a novel allylic acetoxylated derivative of himachalenes. This reaction was achieved by incorporating an aromatic ring into the substrate structure. The resulting intermediate complex was isolated and characterized using nuclear magnetic resonance spectroscopy and X-ray crystallography. Density functional theory (DFT) calculations were performed to compare the reactivity of the newly synthesized complex with previously reported ones. The theoretical results confirm that the introduction of an aromatic ring enhances the reactivity of the η³-allyl palladium complex, thereby facilitating the desired transformation.

The Dialuminene AriPr8AlAlAriPr8 (AriPr8=C6H-2,6-(C6H2-2,4,6-iPr3)2-3,5-iPr2).

Careful analysis of the crystals formed in the reduction of AriPr8AlI2 (AriPr8=C6H-2,6-(C6H2-2,4,6-iPr3)2-3,5-iPr2) with sodium on sodium chloride showed them to contain the long sought-after dialuminene AriPr8AlAlAriPr8 (1) that forms alongside the previously characterized alanediyl :AlAriPr8. The single crystal X-ray structure of 1 revealed a nearly planar, trans-bent C(ipso)AlAlC(ipso) core with an Al-Al distance of 2.648(2) Å. The molecular and electronic structure of 1 are consistent with an Al-Al double dative interaction augmented with diradical character and stabilized by dispersion interactions. Density functional theory calculations showed that the reactivity of :AlAriPr8 with dihydrogen involves 1, not :AlAriPr8, as the reactive species. In contrast, the reaction of :AlAriPr8 with ethylene gave two products, the 1,4-dialuminacyclohexane AriPr8Al(C2H4)2AlAriPr8 (2) and the aluminacyclopentane AriPr8Al(C4H8) (3), that can both form from the aluminacyclopropane intermediate AriPr8Al(C2H4). Although the [2+2+2] cycloaddition of 1 with two equivalents of ethylene was also calculated to be exergonic, it is likely to be kinetically blocked by the numerous isopropyl substituents surrounding the Al-Al bond. Attempts to fine-tune the steric bulk of the terphenyl ligand to allow stronger Al-Al bonding were unsuccessful, leading to the isolation of the sodium salt of a cyclotrialuminene, Na2[AlAriPr6]3 (4), instead of AriPr6AlAlAriPr6.

A Double-walled Noncovalent Carbon Nanotube by Columnar Packing of Nanotube Fragments.

Herein, we report the synthesis of double-walled noncovalent carbon nanotubes (CNTs) through host-guest complexation of nanotube fragments and tube-forming crystal engineering. As the smallest fragment of double-walled CNTs, a host-guest complex of perfluorocycloparaphenylene (PFCPP) and carbon nanobelt (CNB) was synthesized by mixing them in solvents. The immediate complexation of the PF[12]CPP⊃(6,6)CNB complex with a remarkably high association constant (Ka) of 2×105 L/mol was observed. Time-dependent 1H NMR and thermogravimetry measurements revealed that the stability of (6,6)CNB was significantly improved by encapsulation. X-ray crystallography confirmed the robust belt-in-ring structure of this complex. As indicated by the short distance between PF[12]CPP and (6,6)CNB (2.8 Å), intermolecular orbital interactions exist between the belt and the ring, which were further supported by theoretical calculation and phosphorescence quenching experiments. While the PF[12]CPP⊃(6,6)CNB complex adopts various crystal packing structures, chloroform was discovered to be a magic "glue" solvent inducing one-dimensional alignment of the PF[12]CPP⊃(6,6)CNB complex to build an unprecedented double-walled noncovalent CNT structure.

Structural and theoretical insights into the influence of thiocyanate ligands on divalent metal complexes with terpyridine derivatives

Four complexes with terpyridine derivative, thiocyanate anion, and selected d-electron metals were studied. The obtained complexes of the formulation [M(ftpy)(SCN)2(CH3OH)]•DMF (M = Mn (1), Co (2), Ni (3)) and [Cu(ftpy)(NCS)2]•H2O (4), where ftpy = 4′‐(furan-2-yl)-2,2′:6′,2′′‐terpyridine, were characterized using FTIR and UV–Vis spectroscopies, magnetic studies, elemental analysis, and single crystal X-ray crystallography. All compounds crystallize in a triclinic crystal system with space group P1¯ and 1–3 are isomorphous and isostructural. The effect of the modification of the terpyridine ligand and the presence of the thiocyanate ligand on the structure has been verified. Interesting dependence was found in the structure of compound 4, where the two thiocyanate ligands are differently coordinated, one via N and the other via S, and the formation of complex dimers connected through hydrogen bonds is observed. The π-stacking interactions and the resulting solid-state architectures of compounds 1–4 were inspected through a combination of DFT calculations, QTAIM, and NCIPlot analyses, and the stability of the complexes was studied by UV–Vis spectroscopy in various solvents.

“Seeing Is Believing”: How Neutron Crystallography Informs Enzyme Mechanisms by Visualizing Unique Water Species

Hydrogen is the lightest atom and composes approximately half of the atomic content in macromolecules, yet their location can only be inferred or predicted in most macromolecular structures. This is because hydrogen can rarely be directly observed by the most common structure determination techniques (such as X-ray crystallography and electron cryomicroscopy). However, knowledge of hydrogen atom positions, especially for enzymes, can reveal protonation states of titratable active site residues, hydrogen bonding patterns, and the orientation of water molecules. Though we know they are present, this vital layer of information, which can inform a myriad of biological processes, is frustratingly invisible to us. The good news is that, even at modest resolution, neutron crystallography (NC) can reveal this layer and has emerged this century as a powerful tool to elucidate enzyme catalytic mechanisms. Due to its strong and coherent scattering of neutrons, incorporation of deuterium into the protein crystal amplifies the power of NC. This is especially true when solvation and the specific participation of key water molecules are crucial for catalysis. Neutron data allow the modeling of all three atoms in water molecules and have even revealed previously unobserved and unique species such as hydronium (D3O+) and deuteroxide (OD−) ions as well as lone deuterons (D+). Herein, we briefly review why neutrons are ideal probes for identifying catalytically important water molecules and these unique water-like species, limitations in interpretation, and four vignettes of enzyme success stories from disparate research groups. One of these groups was that of Dr. Chris G. Dealwis, who died unexpectedly in 2022. As a memorial appreciation of his scientific career, we will also highlight his interest and contributions to the neutron crystallography field. As both the authors were mentored by Chris, we feel we have a unique perspective on his love of molecular structure and admiration for neutrons as a tool to query those structures.

The H2Sxmacropa Series: Increasing the Chemical Softness of H2macropa with Sulfur Atoms to Chelate Radiometals [213Bi]Bi3+ and [203Pb]Pb2+ for Radiopharmaceutical Applications.

The effects of replacing nitrogen with sulfur atoms in the 18-membered macrocycle of the H2macropa chelator on the binding affinity and stability of "intermediate" (radio)metal [203Pb]Pb2+ and [213Bi]Bi3+ complexes are investigated. The 1,4,10,13-tetraoxo-7,16-diazacyclooctadecane backbone was replaced with derivatives containing sulfur in the 1,4- or the 1,4,10,13-positions to yield the novel chelators H2S2macropa (N4O4S2) and H2S4macropa (N4O2S4), respectively. Trends on the nat/203Pb- and nat/213Bi-complex stability constants, coordination chemistry, radiolabeling, and kinetic inertness were assessed via potentiometric titrations, UV-vis spectroscopy, NMR spectroscopy, X-ray crystallography and density functional theory (DFT) calculations. 1H-207Pb NMR spectroscopy confirmed the involvement of backbone S and/or O donors in the metal coordination sphere. Overall, the trend demonstrated that increasing the softness of the donor atoms within the ligand backbone decreased the thermodynamic stability and kinetic inertness of both the Pb2+ and Bi3+ complexes. Conversely, DFT calculations with mock compounds dimethyl ether (DME) and dimethyl sulfide (DMS) demonstrated enhanced affinity of the S atom to both Pb2+ and Bi3+ with DMS compared to DME evinced by large ΔG° values for both Pb2+ and Bi3+ complexes. The decreased stability of Pb/Bi-Sxmacropa (x = 0, 2, 4) upon increased sulfur atom incorporation may be a result of the increased steric strain within the macrocyclic backbone upon sulfur atom introduction. Nonetheless, [203Pb]Pb2+ and [213Bi]Bi3+ labeling (pH = 7, 30 min reaction time; 10-4-10-8 M chelator) resulted in both S2macropa2- and macropa2- attaining similarly high radiolabeling efficiency. Meanwhile, S4macropa2- only possessed the ability to complex [213Bi]Bi3+. Both [203Pb][Pb(macropa)] and [203Pb][Pb(S2macropa)] remained greater than 97% intact when challenged against human serum over 72 h. The results of this study reveal the effects of incorporating sulfur donor atoms into macrocyclic chelators for [203Pb]Pb2+ and [213Bi]Bi3+ radiopharmaceuticals.

Albumins constrainting the conformation of mitochondria-targeted photosensitizers for tumor-specific photodynamic therapy

Tumor ablation Preclinical organelle-targeted phototherapies have effectively achieved tumor photoablation for regenerative biomedical applications in cancer therapies. However, engineering effective phototherapy drugs with precise tumor-localization targeting and organelle direction remains challenging. Herein, we report a albumins constrainting mitochondrial-targeted photosensitizer nanoparticles (PSs@BSAs) for tumor-specific photodynamic therapy. X-ray crystallography elucidates the two-stage assembly mechanism of PSs@BSAs. Femtosecond transient absorption spectroscopy and quantum mechanical calculations reveal the implications of conformational dynamics at the excited state. PSs@BSAs can efficiently disable mitochondrial activity, and further disrupt tumor angiogenesis based on the photodynamic effect. This triggers a metabolic and oxidative stress crisis to facilitate photoablation of solid tumor and antitumor metastasis. The study fully elucidates the interdisciplinary issues of chemistry, physics, and biological interfaces, thereby opening new horizons to inspire the engineering of organelle-targeted tumor-specific photosensitizers for biomedical applications.

PnictogenIIIDications Supported by BZIMPY Ligands.

Two homologous series of pnictogen(III) dications, stabilized by 2,6-bis(benzimidazole-2-yl)pyridine ligands have been prepared. Both series contain PnIII-X moieties (Pn = P, As, Sb, Bi; X = Cl or Ph) and have been fully characterized using spectroscopic methods including X-ray crystallography. The Lewis acidity of these compounds has also been probed by computational methods; the results suggest that the dictations are strong Lewis acids, with the PnCl2+ compounds being more acidic than the PnPh2+ compounds, and with Lewis acidity increasing from P to Bi, in both series. The PhP2+-containing compound was also found to be a versatile PIII transfer reagent, leading to new synthetic routes for various PhP-containing compounds. The redox chemistry of all compounds has also been probed using cyclic voltammetry and chemical reductions. In some cases the resulting PnI moieties could be trapped using diazabutadienes.