Single Chromophore Research Articles

Ultrasensitive Solvatochirochromism of Single Benzene Chromophores.

Solvents influence the structure, aggregation and folding behaviors of solvatochromic compounds. Ultrasensitive solvent mediated chiroptical response is conducive to the fabrication of molecular platform for sensing and recognition, which however, remains great challenges in conceptual or applicable design. Here we report a cysteine-based single benzene chromophore system that shows ultrasensitivity to solvents. Compared to the ratiometrically responsive systems, the chiroptical activities could be triggered or inverted depending on the substituents of chiral entities with an ultralow solvent volume fraction (<1 vol %). One drop of dipolar solvents shall significantly induce the emergence or inversion of chiroptical signals in bulky phases. Based on the experimental and computational studies, the ultrasensitivity is contributed to the intimate interplay between solvents and chiral compounds that anchors the specific chiral conformation. It illustrates that structurally simple organic compounds without aggregation or folding behaviors possess pronounced solvatochiroptical properties, which sheds light on the next-generation of chiroptical sensors and switches.

Bridge-induced taming of the visible electronic circular dichroism signatures of helicoBODIPYs

Helically-flexible bis(BODIPY)s based on chiral ethane-1,2-diamine or −1,2-diol bridges (named helicoBODIPYs) are an interesting family of accessible and tunable small multichromophoric organic dyes enabling visible electronic circular dichroism (ECD) and, even visible circularly polarized luminescence (CPL). However, their CPL brightness (BCPL) is still limited (up to ca. 10 M−1cm−1), due to low fluorescence efficiency owing to a non-optimal participation of intramolecular charge transfer (CT) emission. Herein, we analyze in depth the origin and factors controlling this CT, demonstrating the key participation of a BODIPY-to-BODIPY symmetry-breaking induced CT (SBCT), beyond the expected CT within each single BODIPY chromophore due to their push-pull character. It is also demonstrated that increasing the overcrowding at the flexible helicoBODIPY ethane bridges leads to BODIPY-BODIPY faced dispositions, promoting the SBCT and enabling the detection of both CT absorption and CT emission bands under specific conditions. Interestingly, this SBCT enhances the visible ECD (absolute gabs values), supporting the key role of the involved forbidden CT transitions in the chiroptical activity of these dyes, as well as the possibility of modulating their valuable visible chiroptical signatures (e.g., visible CPL brightness) by easily playing with steric factors at the dye bridge.

Assembly of CpcL-phycobilisomes.

CpcL-phycobilisomes (CpcL-PBSs) are a reduced type of phycobilisome (PBS) found in several cyanobacteria. They lack the traditional PBS terminal energy emitters, but still show the characteristic red-shifted fluorescence at ~670 nm. We established a method of assembling in vitro a rod-membrane linker protein, CpcL, with phycocyanin, generating complexes with the red-shifted spectral features of CpcL-PBSs. The red-shift arises from the interaction of a conserved key glutamine, Q57 of CpcL in Synechocystis sp. PCC 6803, with a single phycocyanobilin chromophore of trimeric phycocyanin at one of the three β82-sites. This chromophore is the terminal energy acceptor of CpcL-PBSs and donor to the photosystem(s). This mechanism also operates in PBSs from Acaryochloris marina MBIC11017. We then generated multichromic complexes harvesting light over nearly the complete visible range via the replacement of phycocyanobilin chromophores at sites α84 and β153 of phycocyanins by phycoerythrobilin and/or phycourobilin. The results demonstrate the rational design of biliprotein-based light-harvesting elements by engineering CpcL and phycocyanins, which broadens the light-harvesting range and accordingly improves the light-harvesting capacity and may be potentially applied in solar energy harvesting.

Picosecond quantum-classical dynamics reveals that the coexistence of light-induced microbial and animal chromophore rotary motion modulates the isomerization quantum yield of heliorhodopsin.

Rhodopsins are light-responsive proteins forming two vast and evolutionary distinct superfamilies whose functions are invariably triggered by the photoisomerization of a single retinal chromophore. In 2018 a third widespread superfamily of rhodopsins called heliorhodopsins was discovered using functional metagenomics. Heliorhodopsins, with their markedly different structural features with respect to the animal and microbial superfamilies, offer an opportunity to study how evolution has manipulated the chromophore photoisomerization to achieve adaptation. One question is related to the mechanism of such a reaction and how it differs from that of animal and microbial rhodopsins. To address this question, we use hundreds of quantum-classical trajectories to simulate the spectroscopically documented picosecond light-induced dynamics of a heliorhodopsin from the archaea thermoplasmatales archaeon (TaHeR). We show that, consistently with the observations, the trajectories reveal two excited state decay channels. However, inconsistently with previous hypotheses, only one channel is associated with the -C13C14- rotation of microbial rhodopsins while the second channel is characterized by the -C11C12- rotation typical of animal rhodopsins. The fact that such -C11C12- rotation is aborted upon decay and ground state relaxation, explains why illumination of TaHeR only produces the 13-cis isomer with a low quantum efficiency. We argue that the documented lack of regioselectivity in double-bond excited state twisting motion is the result of an "adaptation" that could be completely lost via specific residue substitutions modulating the steric hindrance experienced along the isomerization motion.

Visible-Light-Activated Carbon Monoxide Release from Porphyrin-Flavonol Hybrids.

We report on porphyrin-flavonol hybrids consisting of a porphyrin antenna and four covalently bound 3-hydroxyflavone (flavonol) groups, which act as highly efficient photoactivatable carbon monoxide (CO)-releasing molecules (photoCORMs). These bichromophoric systems enable activation of the UV-absorbing flavonol chromophore by visible light up to 650 nm and offer precise spatial and temporal control of CO administration. The physicochemical properties of the porphyrin antenna system can also be tuned by inserting a metal cation. Our computational study revealed that the process occurs via endergonic triplet-triplet energy transfer from porphyrin to flavonol and may become feasible thanks to flavonol energy stabilization upon intramolecular proton transfer. This mechanism was also indirectly supported by steady-state and transient absorption spectroscopy techniques. Additionally, the porphyrin-flavonol hybrids were found to be biologically benign. With four flavonol CO donors attached to a single porphyrin chromophore, high CO release yields, excellent uncaging cross sections, low toxicity, and CO therapeutic properties, these photoCORMs offer exceptional potential for their further development and future biological and medical applications.

Hot luminescence from single-molecule chromophores electrically and mechanically self-decoupled by tripodal scaffolds

Control over the electrical contact to an individual molecule is one of the biggest challenges in molecular optoelectronics. The mounting of individual chromophores on extended tripodal scaffolds enables both efficient electrical and mechanical decoupling of individual chromophores from metallic leads. Core-substituted naphthalene diimides fixed perpendicular to a gold substrate by a covalently attached extended tripod display high stability with well-defined and efficient electroluminescence down to the single-molecule level. The molecularly controlled spatial arrangement balances the electric conduction for electroluminescence and the insulation to avoid non-radiative carrier recombination, enabling the spectrally and spatially resolved electroluminescence of individual self-decoupled chromophores in a scanning tunneling microscope. Hot luminescence bands are even visible in single self-decoupled chromophores, documenting the mechanical decoupling between the vibrons of the chromophore and the substrate.

Molecular dissection of the soluble photosynthetic antenna from the cryptophyte alga Hemiselmis andersenii

Cryptophyte algae have a unique phycobiliprotein light-harvesting antenna that fills a spectral gap in chlorophyll absorption from photosystems. However, it is unclear how the antenna transfers energy efficiently to these photosystems. We show that the cryptophyte Hemiselmis andersenii expresses an energetically complex antenna comprising three distinct spectrotypes of phycobiliprotein, each composed of two αβ protomers but with different quaternary structures arising from a diverse α subunit family. We report crystal structures of the major phycobiliprotein from each spectrotype. Two-thirds of the antenna consists of open quaternary form phycobiliproteins acting as primary photon acceptors. These are supplemented by a newly discovered open-braced form (~15%), where an insertion in the α subunit produces ~10 nm absorbance red-shift. The final components (~15%) are closed forms with a long wavelength spectral feature due to substitution of a single chromophore. This chromophore is present on only one β subunit where asymmetry is dictated by the corresponding α subunit. This chromophore creates spectral overlap with chlorophyll, thus bridging the energetic gap between the phycobiliprotein antenna and the photosystems. We propose that the macromolecular organization of the cryptophyte antenna consists of bulk open and open-braced forms that transfer excitations to photosystems via this bridging closed form phycobiliprotein.

Site Selectivity of Peptoids as Azobenzene Scaffold for Molecular Solar Thermal Energy Storage.

Storing solar energy is a key challenge in modern science. MOlecular Solar Thermal (MOST) systems, in particular those based on azobenzene switches, have received great interest in the last decades. The energy storage properties of azobenzene (t1/2 <4 days; ΔH~270 kJ/kg) must be improved for future applications. Herein, we introduce peptoids as programmable supramolecular scaffolds to improve the energy storage properties of azobenzene-based MOST systems. We demonstrate with 3-unit peptoids bearing a single azobenzene chromophore that dynamics of the MOST systems can be tuned depending on the anchoring position of the photochromic unit on the macromolecular backbone. We measured a remarkable increase of the half-life of the metastable form up to 14 days at 20 °C for a specific anchoring site, significantly higher than the isolated azobenzene moiety, thus opening new perspectives for MOST development. We also highlight that liquid chromatography coupled to mass spectrometry does not only enable to monitor the different stereoisomers during the photoisomerization process as traditionally done, but also allows to determine the thermal back-isomerization kinetics.

Molecular engineering and bioimaging applications of C2-alkenyl indole dyes with tunable emission wavelengths covering visible to NIR light

As an important member of dyes, small-molecule fluorescent dyes show indispensable value in biomedical fields. Although various molecular dyes have been developed, full-color dyes covering blue to red region derived from a single chromophore are still in urgent demand. In this work, a series of dyes based on C2-alkenyl indole skeleton were synthesized, namely AI dyes, and their photophysical properties, cytotoxicity, and imaging capacity were verified to be satisfactory. Particularly, the maximal emission wavelengths of these dyes could cover a wide range from visible to NIR light with large Stokes shifts. Besides, the optical and structural discrepancies between the C2- and C3- alkenyl AI dyes were discussed in detail, and the theoretical calculations were conducted to provide insights on such structure–activity relationship. Finally, as a proof-of-concept, a fluorescent probe AI-Py-B capable of imaging endogenous ONOO− was presented, demonstrating the bioimaging potentials of these alkenyl indole dyes. This work is anticipated to open up new possibilities for developing dye engineering and bio-applications of natural indole framework.

Dihydroanthracene bridged bis-naphthopyrans: A multimodal chromophore with mechano- and photo-chromic properties

Mechanochromophores based on bichromic molecular switches, such as bis-naphthopyanes, allow multimodal mechanochromic behavior beyond the typical binary response from single chromophores, which is important for distinguishing between multiple stress states through discrete changes in color. Spontaneously generated persistent and distinguishable multi-colors from activated bis-naphthopyanes remain challenging. And the versatility of bis-mechanophore design for advanced optical molecular systems and the fundamental insights into the corresponding mechano-reactivity are not enough. Here, we identify a dihydroanthracene bridged bis-naphthopyrans as a multimodal mechanochromophore in polymers. Bridging two pyrans with the sterically constrained dihydroanthracene is helpful to control the steric effect for the favorable formation of a distinctly appreciable bis-merocyanine (bis-MC) product. By varying the length of the polymer chains, the force delivered to the mechanophore is modulated, resulting in a gradient change in the relative distribution of two distinctly colored MC products and a multicolor mechanochromism. Mechanical activation of this bis-naphthopyanes proceeds via a mechanistically distinct pathway compared to the photochemical process. In addition, the bulk films can also achieve pronounced color changes when subjected to mechanical force. This study thus further expands the molecular diversity of mechanochromophores and tune the multimodal switch properties of bis-naphthopyrans based polymers.

Influence of the Fluorophore Mobility on Distance Measurements by Gas-Phase FRET.

Gas-phase Förster resonance energy transfer (FRET) combines mass spectrometry and fluorescence spectroscopy for the conformational analysis of mass-selected biomolecular ions. In FRET, fluorophore pairs are typically covalently attached to a biomolecule using short linkers, which affect the mobility of the dye and the relative orientation of the transition dipole moments of the donor and acceptor. Intramolecular interactions may further influence the range of motion. Yet, little is known about this factor, despite the importance of intramolecular interactions in the absence of a solvent. In this study, we applied transition metal ion FRET (tmFRET) to probe the mobility of a single chromophore pair (Rhodamine 110 and Cu2+) as a function of linker lengths to assess the relevance of intramolecular interactions. Increasing FRET efficiencies were observed with increasing linker length, ranging from 5% (2 atoms) to 28% (13 atoms). To rationalize this trend, we profiled the conformational landscape of each model system using molecular dynamics (MD) simulations. We captured intramolecular interactions that promote a population shift toward smaller donor-acceptor separation for longer linker lengths and induce a significant increase in the acceptor's transition dipole moment. The presented methodology is a first step toward the explicit consideration of a fluorophore's range of motion in the interpretation of gas-phase FRET experiments.

Fine adjustment of emission wavelength, light-conversion quality, photostability of blue-violet light conversion agents based on FRET effect

Single fluorescent chromophore is difficult to achieve efficient photoecological effect, meanwhile, the cost of light conversion agent should be more strictly controlled, thereby promoting the large-scale application of light conversion agricultural film. To solve the above problems, three carbazole derivatives CZ, TCZ and MCZ as donors of Förster resonance energy transfer, and the tris(carbazolyl) substituted triazine TPT as an acceptor of Förster resonance energy transfer, were designed and synthesized. Based on absorption and emission spectra, aggregation induced emission experiments, and light conversion quality tests, the best formulation of light conversion film are obtained. Among of them, TCZ@0.2TPT@EVAb and MCZ@0.2TPT@EVAb films (40% ethylene vinyl alcohol copolymer defined as EVAb film) show highest photosynthetic photon flux density at 400–500 nm, and matching fluorescence emission (458 nm and 461 nm). Under 20 h of intensified ultraviolet radiation (365 nm, 40 W), the emission intensity of TCZ@0.2TPT@EVAb and MCZ@0.2TPT@EVAb films can maintain over 94% of the initial value, showing excellent photostability. Compared with the blank EVAa/EVAb film, the transmittance of the doping films at 500–600 nm are up to 95.12%–99.64%, meaning excellent compatibility and dispersion of light conversion agent in doping films. It is worth mentioning that emission maxima of doping films can be continuously adjusted within the spectral range 430–480 nm, which is conducive to meet the photoecological needs of different crops. Finally, the doping films show low transmittance (1.78%–11.42%) at 200–350 nm, outlining excellent UV light conversion properties.

Phycobilisome’s Exciton Transfer Efficiency Relies on an Energetic Funnel Driven by Chromophore–Linker Protein Interactions

The phycobilisome is the primary light-harvesting antenna in cyanobacterial and red algal oxygenic photosynthesis. It maintains near-unity efficiency of energy transfer to reaction centers despite relying on slow exciton hopping along a relatively sparse network of highly fluorescent phycobilin chromophores. How the complex maintains this high efficiency remains unexplained. Using a two-dimensional electronic spectroscopy polarization scheme that enhances energy transfer features, we directly watch energy flow in the phycobilisome complex of Synechocystis sp. PCC 6803 from the outer phycocyanin rods to the allophycocyanin core. The observed downhill flow of energy, previously hidden within congested spectra, is faster than timescales predicted by Förster hopping along single rod chromophores. We attribute the fast, 8 ps energy transfer to interactions between rod-core linker proteins and terminal rod chromophores, which facilitate unidirectionally downhill energy flow to the core. This mechanism drives the high energy transfer efficiency in the phycobilisome and suggests that linker protein-chromophore interactions have likely evolved to shape its energetic landscape.

Molecular and Aggregate Synergistic Engineering of Aggregation-Induced Emission Luminogens to Manipulate Optical/Electronic Properties for Efficient and Diversified Functions.

The optical/electronic properties of organic luminescent materials can be regulated by molecular structure modification, which not only requires sophisticated and time-consuming synthesis but also is unable to accurately afford the optical properties of materials in the aggregate state. Herein, a facile strategy of molecular and aggregate synergistic engineering is proposed to manipulate the optical/electronic properties of a luminogen, ACIK, in the solid state for efficient and diversified functions. ACIK is facilely synthesized and exhibits three polymorphic states (ACIK-Y, ACIK-R, and ACIK-N) with a large emission difference of 102 nm from yellow to near-infrared (NIR). Their structure-property relationships were investigated by crystallographic analyses and computational studies. ACIK-Y, with the most twisted structure, exhibits an intriguing color-tuned fluorescence between yellow and NIR in the solid state in response to multiple stimuli. Shuttle-like ACIK-R microcrystals exhibit an optical waveguide property with a low optical loss coefficient of 19 dB mm-1. ACIK dots display bright NIR-I emission, large Stokes shift, and strong NIR-II two-photon absorption. ACIK dots show specific lipid droplets-targeting capability and can be successfully applied for two-photon fluorescence imaging of mouse brain vasculature with deep penetration and high spatial resolution. This study will inspire more insights in developing advanced optical/electronic materials based on a single chromophore for practical applications.

Multicolor Chromism from a Single Chromophore through Synergistic Coupling of Mechanochromic and Photochromic Subunits

AbstractWe report a versatile mechanophore exhibiting a vividly detectable, light‐regulable multicolor mechanochromism. Such optical features rely on the synergistic coupling of mechanochromic bis‐rhodamine (Rh) and photochromic bisthienylethene (BTE). Poly(methyl acrylate)s incorporating this bis‐mechanophore can be mechanically activated under sonication. The relative distribution of the two distinctly colored and fluorescent Rh ring‐opening products is altered with different magnitudes of applied force. Orthogonal use of the photochromic reaction of the BTE core can strengthen the mechanochromism and gate the mechanofluorescence in polymers. Due to increased conjugation offered by the BTE linker, both force‐ and light‐induced optical signals display high contrast. Combined DFT simulated and experimental results reveal that the three subunits (two Rhs and one BTE) in this chromophore are activated sequentially, thus generating switchable three‐colored forms and gradient optical responses.

Multicolor Chromism from a Single Chromophore through Synergistic Coupling of Mechanochromic and Photochromic Subunits.

We report a versatile mechanophore exhibiting a vividly detectable, light-regulable multicolor mechanochromism. Such optical features rely on the synergistic coupling of mechanochromic bis-rhodamine (Rh) and photochromic bisthienylethene (BTE). Poly(methyl acrylate)s incorporating this bis-mechanophore can be mechanically activated under sonication. The relative distribution of the two distinctly colored and fluorescent Rh ring-opening products is altered with different magnitudes of applied force. Orthogonal use of the photochromic reaction of the BTE core can strengthen the mechanochromism and gate the mechanofluorescence in polymers. Due to increased conjugation offered by the BTE linker, both force- and light-induced optical signals display high contrast. Combined DFT simulated and experimental results reveal that the three subunits (two Rhs and one BTE) in this chromophore are activated sequentially, thus generating switchable three-colored forms and gradient optical responses.

Calculation of exciton couplings based on density functional tight-binding coupled to state-interaction state-averaged ensemble-referenced Kohn-Sham approach.

We introduce the combination of the density functional tight binding (DFTB) approach, including onsite correction (OC) and long-range corrected (LC) functional and the state-interaction state-averaged spin-restricted ensemble-referenced Kohn-Sham (SI-SA-REKS or SSR) method with extended active space involving four electrons and four orbitals [LC-OC-DFTB/SSR(4,4)], to investigate exciton couplings in multichromophoric systems, such as organic crystals and molecular aggregates. We employ the LC-OC-DFTB/SSR(4,4) method to calculate the excitonic coupling in anthracene and tetracene. As a result, the LC-OC-DFTB/SSR(4,4) method provides a reliable description of the locally excited (LE) state in a single chromophore and the excitonic couplings between chromophores with reasonable accuracy compared to the experiment and the conventional SSR(4,4) method. In addition, the thermal fluctuation of excitonic couplings from dynamic nuclear motion in an anthracene crystal with LC-OC-DFTB/SSR(4,4) shows a similar fluctuation of excitonic coupling and spectral density with those of first-principle calculations. We conclude that LC-OC-DFTB/SSR(4,4) is capable of providing reasonable features related to LE states, such as Frenkel exciton with efficient computational cost.

Fluorene pendant-functionalization of poly(N-vinylcarbazole) as deep-blue fluorescent and host materials for polymer light-emitting diodes

π-Electron coupling of pendant conjugated segment in π-stacked semiconducting polymers always causes the formation of defect trapped sites and further quenched high-band excitons, which is harmful to the performance and stability of deep-blue polymer light-emitting diodes (PLEDs). Herein, considerate of “defect” carbazole (Cz) electromers in poly(N-vinylcarbazole) (PVK), a series of fluorene units are introduced into pendant segments (PVCz-DMeF, PVCz-FMeNPh and PVCz-DFMeNPh) to suppress the strong π-electron coupling of pendant Cz units and enhance radiative transition toward fabricating sable PLEDs. Compared to PVCz-FMeNPh and PVCz-DFMeNPh, PVCz-DMeF spin-coated films show a relatively efficient deep-blue emission, completely similar to its single pendant chromophore, confirmed an extremely weak charge-transfer and electron coupling between adjacent pendant segments. Therefore, PLEDs based on PVCz-DMeF present stable and deep-blue emission with a high color purity (0.17, 0.08), associated with extremely weak defect emission at 600∼700 nm (induced by carbazole electromers). Finally, PLEDs based on PVCz-DMeF/F8BT blended films (1:1) also present the high maximum luminance (Lmax) of 6261 cd/m2 and current efficiency (CEmax) of 2.03 cd/A, confirmed slightly trapped sites formation. Therefore, precisely control the arrangement and packing model of pendant units in π-stacked polymer is an essential prerequisite for building efficient and stable emitter for optoelectronic devices.

Excitation-Dependent Multicolour Luminescence of Organic Materials: Internal Mechanism and Potential Applications.

Excitation-dependent emission (Ex-de) materials have been of considerable academic interest and have potential applications in real life. Such multicolour luminescence is a characteristic exception to the ubiquitously accepted Kasha's rule. This phenomenon has been increasingly presented in some studies on different luminescence systems; however, a systematic overview of the mechanisms underlying this phenomenon is currently absent. Herein, we resolve this issue by classifying multicolour luminescence from single chromophores and dual/ternary chromophores, as well as multiple emitting species. The underlying processes are described based on electronic and/or geometrical conditions under which the phenomenon occurs. Before we present it in categories, related photophysical and photochemical foundations are introduced. This systematic overview will provide a clear approach to designing multicolour luminescence materials for special applications.

Excitation‐Dependent Multicolour Luminescence of Organic Materials: Internal Mechanism and Potential Applications

AbstractExcitation‐dependent emission (Ex‐de) materials have been of considerable academic interest and have potential applications in real life. Such multicolour luminescence is a characteristic exception to the ubiquitously accepted Kasha's rule. This phenomenon has been increasingly presented in some studies on different luminescence systems; however, a systematic overview of the mechanisms underlying this phenomenon is currently absent. Herein, we resolve this issue by classifying multicolour luminescence from single chromophores and dual/ternary chromophores, as well as multiple emitting species. The underlying processes are described based on electronic and/or geometrical conditions under which the phenomenon occurs. Before we present it in categories, related photophysical and photochemical foundations are introduced. This systematic overview will provide a clear approach to designing multicolour luminescence materials for special applications.