Single Binding Event Research Articles

Probing actin-activated ATP turnover kinetics of human cardiac myosin II by single molecule fluorescence.

Mechanistic insights into myosin II energy transduction in striated muscle in health and disease would benefit fromfunctional studies of a wide range of point-mutants. This approach is, however, hampered by the slow turnaround of myosin II expression that usually relies on adenoviruses for gene transfer. A recently developed virus-free method is more time effective but would yield too small amounts of myosin for standard biochemical analyses. However, if the fluorescent adenosine triphosphate (ATP) and single molecule (sm) total internal reflection fluorescence microscopy previously used to analyze basal ATP turnover by myosin alone, can be expanded to actin-activated ATP turnover, it would appreciably reduce the required amount of myosin. To that end, we here describe zero-length cross-linking of human cardiac myosin II motor fragments (sub-fragment 1 long [S1L]) to surface-immobilized actin filaments in a configuration with maintained actin-activated ATP turnover. After optimizing the analysis of sm fluorescence events, we show that the amount of myosin produced from C2C12 cells in one 60 mm cell culture plate is sufficient to obtain both the basal myosin ATP turnover rate and the maximum actin-activated rate constant (kcat). Our analysis of many single binding events of fluorescent ATP to many S1L motor fragments revealed processes reflecting basal and actin-activated ATPase, but also a third exponential process consistent with non-specific ATP-binding outside the active site.

Kinetics of brain gangliosides binding to myelin-associated glycoprotein from fluctuation analysis of single liposome binding events

Kinetics of brain gangliosides binding to myelin-associated glycoprotein from fluctuation analysis of single liposome binding events

Kelvin probe force microscopy on patterned large-area biofunctionalized surfaces: a reliable ultrasensitive platform for biomarker detection.

Kelvin probe force microscopy (KPFM) allows the detection of single binding events between immunoglobulins (IgM, IgG) and their cognate antibodies (anti-IgM, anti-IgG). Here an insight into the reliability and robustness of the methodology is provided. Our method is based on imaging the surface potential shift occurring on a dense layer of ∼5 × 107 antibodies physisorbed on a 50 μm × 90 μm area when assayed with increasing concentrations of antigens in phosphate buffer saline (PBS) standard solutions, in air and at a fixed scanning location. A comprehensive investigation of the influence of the main experimental parameters that may interfere with the outcomes of KPFM immune-assay is provided, showing the robustness and reliability of our approach. The data are supported also by a thorough polarization modulation infrared reflection-absorption spectroscopy (PM-IRRAS) analysis of the physisorbed biolayer, in the spectral region of the amide I, amide II and amide A bands. Our findings demonstrate that a 10 min incubation in 500 μL PBS encompassing ≈ 30 antigens (100 zM) triggers an extended surface potential shift that involves the whole investigated area. Such a shift quickly saturates at increasing ligand concentration, showing that the developed sensing platform works as an OFF/ON detector, capable of assessing the presence of a few specific biomarkers in a given assay volume. The reliability of the developed methodology KPFM is an important asset in single molecule detections at a wide electrode interface.

From Whispering Gallery Mode Resonators to Biochemical Sensors.

Optical biosensors are frontrunners for the rapid and real-time detection of analytes, particularly for low concentrations. Among them, whispering gallery mode (WGM) resonators have recently attracted a growing focus due to their robust optomechanical features and high sensitivity, measuring down to single binding events in small volumes. In this review, we provide a broad overview of WGM sensors along with critical advice and additional "tips and tricks" to make them more accessible to both biochemical and optical communities. Their structures, fabrication methods, materials, and surface functionalization chemistries are discussed. We propose this reflection under a pedagogical approach to describe and explain these biochemical sensors with a particular focus on the most recent achievements in the field. In addition to highlighting the advantages of WGM sensors, we also discuss and suggest strategies to overcome their current limitations, leaving room for further development as practical tools in various applications. We aim to provide new insights and combine different knowledge and perspectives to advance the development of the next generation of WGM biosensors. With their unique advantages and compatibility with different sensing modalities, these biosensors have the potential to become major game changers for biomedical and environmental monitoring, among many other relevant target applications.

Investigation on protein dimerization and evaluation of medicine effects by single molecule force spectroscopy

Monitoring the dimerization state of the mesenchymal-epithelial transition factor (Met) was essential for in-depth understanding of the tumor signal transduction network. At present, the dimerization activation pathway of Met protein was mainly studied at the macro level, while the research at the single molecule level was far from comprehensive. Herein, the dimerization activation of Met protein's extracellular domain induced by ligand hepatocyte growth factor (HGF) was dynamically studied by single-molecule force spectroscopy. Met protein was immobilized on a biomimetic lipid membrane for ensuring its physiological environment, and then the Met dimers were recognized by bivalent probe which was formed by two Met-binding aptamers. Then the dimeric state of Met protein could be distinguished from monomeric state of Met protein through some parameters, (such as unimodal ratio, bimodal ratio and separation work). The unimodal indicates the occurrence of single molecule binding event, and the bimodal represents the occurrence of double binding event (also represents the presence of Met dimer). Before HGF treatment, most of the Met protein on the lipid membrane was still in the form of monomer, so the unimodal ratio in the force curve was larger (78.8 ± 5.2%), and the bimodal ratio was smaller (17.0 ± 4.1%). After HGF treatment, the unimodal ratio decreased to 54.0 ± 7.4%, and the bimodal ratio increased to 43.2 ± 7.3%. It was due to the formation of dimers after the binding of Met protein on the fluidity lipid membrane with HGF. In addition, the average separation work increased to about 2 times after HGF treatment. Given that studies of Met protein dimerization inhibitors have contributed to the development of more potent and safe inhibitors to significantly inhibit tumor metastasis, the effects of different medicines (including anticoagulant medicines, different antibiotics and anti-cancer medicines) on the dimerization activation of Met protein were then explored by the platform described above. The results showed that anticoagulant medicines heparin and its analogs can significantly inhibit HGF-mediated Met protein activation, while different antibiotics and anticancer medicines had no significant effect on the dimerization of Met protein. This work provided a platform for studying protein dimerization as well as for screening Met protein dimerization inhibitors at the single-molecule level.

Cardiac myosin velocity and force are dramatically improved with an alternative triphosphate substrate.

Cardiac myosin is the molecular motor that drives the pumping action of the heart; therefore, there is strong interest in gaining control over its function in an effort to develop more effective treatments for various forms of heart disease. We sought to determine if the force and motion generating capacity of β-cardiac myosin could be altered in vitro by replacing ATP with different isomers of an alternative energy source, azobenzene triphosphate (AzoTP). Using the ortho-isomer of AzoTP, cardiac myosin moved actin filaments 62% faster than ATP in a motility assay (p<0.001). Subsequent experiments suggested that the increased velocity may be the result of an accelerated rate of ortho-AzoDP-release from myosin. Cardiac myosin also generated 10% more force when using ortho-AzoTP compared to ATP in a laser trap assay (p<0.001), which was likely due to an increased rate of attachment to actin because the frequency of single actomyosin binding events observed in a three-bead laser trap assay was double that observed for ortho-AzoTP vs. ATP (p<0.001). In contrast to ortho-AzoTP, with the meta isomer of AzoTP cardiac myosin translocated actin filaments 90% slower than with ATP (p<0.001). This finding is likely do to a slowed rate of detachment from actin, based on preliminary single molecule findings. With the para-isomer of AzoTP no movement was detected in the motility assay, suggesting it may not bind to the nucleotide-binding site. Thus, these findings demonstrate that the function of beta-cardiac myosin can be manipulated using structural isomers of an alternative energy substrate (AzoTP). These findings therefore may provide important new insights into how to alter the function of cardiac myosin in vivo, which could help in the development of novel therapies to different forms of heart disease.

Positive feedback in Ras activation through modulation of SOS activation probability.

Ras is a membrane-bound small GTPase that links receptor signals, such as from epidermal growth factor receptor (EGFR) and T cell receptor (TCR), to downstream MAPK signaling. Son of Sevenless (SOS), a guanine-nucleotide exchange factor (GEF), is a primary Ras activator in both EGFR and TCR signaling pathways. SOS is a unique Ras GEF because it contains both catalytic and allosteric Ras binding sites. An important feature of Ras-MAPK signaling is an apparent binary—or switch-like—activation response. This behavior has been attributed to active RasGRP-driven positive feedback in SOS and corresponding kinetic bistability. More recent single-molecule studies of SOS have revealed a variety of previously unknown behaviors, including strong processivity on the membrane (an individual SOS molecule can activate hundreds of Ras molecules during a single membrane binding event) and extended delay times between membrane recruitment and initiation of GEF activity. These studies have also revealed that the catalytic rate of Ras activation by SOS is independent of the nucleotide state of Ras in the allosteric binding site on SOS, thus raising questions about the origins of such positive feedback. This study aims to elucidate a refined mechanism for the observed positive feedback in SOS activation of Ras, which includes these more recent discoveries. Experiments and stochastic modeling studies focus on how the timing of SOS autoinhibition release, rather than common mechanisms such as product-mediated recruitment or allosterically enhanced catalytic rate, may give rise to the observed behavior.

Interfering with nucleotide excision by the coronavirus 3'-to-5' exoribonuclease.

Some of the most efficacious antiviral therapeutics are ribonucleos(t)ide analogs. The presence of a 3'-to-5' proofreading exoribonuclease (ExoN) in coronaviruses diminishes the potency of many ribonucleotide analogs. The ability to interfere with ExoN activity will create new possibilities for control of SARS-CoV-2 infection. ExoN is formed by a 1:1 complex of nsp14 and nsp10 proteins. We have purified and characterized ExoN using a robust, quantitative system that reveals determinants of specificity and efficiency of hydrolysis. Double-stranded RNA is preferred over single-stranded RNA. Nucleotide excision is distributive, with only one or two nucleotides hydrolyzed in a single binding event. The composition of the terminal basepair modulates excision. A stalled SARS-CoV-2 replicase in complex with either correctly or incorrectly terminated products prevents excision, suggesting that a mispaired end is insufficient to displace the replicase. Finally, we have discovered several modifications to the 3'-RNA terminus that interfere with or block ExoN-catalyzed excision. While a 3'-OH facilitates hydrolysis of a nucleotide with a normal ribose configuration, this substituent is not required for a nucleotide with a planar ribose configuration such as that present in the antiviral nucleotide produced by viperin. Design of ExoN-resistant, antiviral ribonucleotides should be feasible.

The inhibitor of κB kinase β (IKKβ) phosphorylates IκBα twice in a single binding event through a sequential mechanism

Phosphorylation of Inhibitor of κB (IκB) proteins by IκB Kinase β (IKKβ) leads to IκB degradation and subsequent activation of nuclear factor κB transcription factors. Of particular interest is the IKKβ-catalyzed phosphorylation of IκBα residues Ser32 and Ser36 within a conserved destruction box motif. To investigate the catalytic mechanism of IKKβ, we performed pre-steady-state kinetic analysis of the phosphorylation of IκBα protein substrates catalyzed by constitutively active, human IKKβ. Phosphorylation of full-length IκBα catalyzed by IKKβ was characterized by a fast exponential phase followed by a slower linear phase. The maximum observed rate (kp) of IKKβ-catalyzed phosphorylation of IκBα was 0.32s-1 and the binding affinity of ATP for the IKKβ•IκBα complex (Kd) was 12μM. Substitution of either Ser32 or Ser36 with Ala, Asp, or Cys reduced the amplitude of the exponential phase by approximately 2-fold. Thus, the exponential phase was attributed to phosphorylation of IκBα at Ser32 and Ser36, whereas the slower linear phase was attributed to phosphorylation of other residues. Interestingly, the exponential rate of phosphorylation of the IκBα(S32D) phosphomimetic amino acid substitution mutant was nearly twice that of WT IκBα and 4-fold faster than any of the other IκBα amino acid substitution mutants, suggesting that phosphorylation of Ser32 increases the phosphorylation rate of Ser36. These conclusions were supported by parallel experiments using GST-IκBα(1-54) fusion protein substrates bearing the first 54 residues of IκBα. Our data suggest a model wherein, IKKβ phosphorylates IκBα at Ser32 followed by Ser36 within a single binding event.

Allosteric activation of preformed EGF receptor dimers by a single ligand binding event.

Aberrant activation of the epidermal growth factor receptor (EGFR) by mutations has been implicated in a variety of human cancers. Elucidation of the structure of the full-length receptor is essential to understand the molecular mechanisms underlying its activation. Unlike previously anticipated, here, we report that purified full-length EGFR adopts a homodimeric form in vitro before and after ligand binding. Cryo-electron tomography analysis of the purified receptor also showed that the extracellular domains of the receptor dimer, which are conformationally flexible before activation, are stabilized by ligand binding. This conformational flexibility stabilization most likely accompanies rotation of the entire extracellular domain and the transmembrane domain, resulting in dissociation of the intracellular kinase dimer and, thus, rearranging it into an active form. Consistently, mutations of amino acid residues at the interface of the symmetric inactive kinase dimer spontaneously activate the receptor in vivo. Optical observation also indicated that binding of only one ligand activates the receptor dimer on the cell surface. Our results suggest how oncogenic mutations spontaneously activate the receptor and shed light on the development of novel cancer therapies.

Label-free optical biosensors in the pandemic era.

The research in the field of optical biosensors is continuously expanding, thanks both to the introduction of brand new technologies and the ingenious use of established methods. A new awareness on the potential societal impact of this research has arisen as a consequence of the Covid-19 pandemic. The availability of a new generation of analytical tools enabling a more accurate understanding of bio-molecular processes or the development of distributed diagnostic devices with improved performance is now in greater demand and more clearly envisioned, but not yet achieved. In this review, we focus on emerging innovation opportunities conveyed by label-free optical biosensors. We review the most recent innovations in label-free optical biosensor technology in consideration of their competitive potential in selected application areas. The operational simplicity implicit to label-free detection can be exploited in novel rapid and compact devices for distributed diagnostic applications. The adaptability to any molecular recognition or conformational process facilitates the integration of DNA nanostructures carrying novel functions. The high sensitivity to nanoscale objects stimulates the development of ultrasensitive systems down to digital detection of single molecular binding events enhanced by nanoparticles and direct enumeration of bio-nanoparticles like viruses.

Alignment of helicases on single-stranded DNA increases activity.

Helicases function in most biological processes that utilize RNA or DNA nucleic acids including replication, recombination, repair, transcription, splicing, and translation. They are motor proteins that bind ATP and then catalyze hydrolysis to release energy which is transduced for conformational changes. Different conformations correspond to different steps in a process that results in movement of the enzyme along the nucleic acid track in a unidirectional manner. Some helicases such as DEAD-box helicases do not translocate, but these enzymes transduce chemical energy from ATP hydrolysis to unwind secondary structure in DNA or RNA. Some helicases function as monomers while others assemble into defined structures, either dimers or higher order oligomers. Dda helicase from bacteriophage T4 and NS3 helicase domain from the hepatitis C virus are examples of monomeric helicases. These helicases can bind to single-stranded DNA in a manner that appears like train engines on a track. When monomeric helicases align on DNA, the activity of the enzymes increases. Helicase activity can include the rate of duplex unwinding and the total number of base pairs melted during a single binding event or processivity. Dda and NS3h are considered as having low processivity, unwinding fewer than 50 base pairs per binding event. Here, we report fusing two molecules of NS3h molecules together through genetically linking the C-terminus of one molecule to the N-terminus of a second NS3h molecule. We observed increased processivity relative to NS3h possibly arising from the increased probability that at least one of the helicases will completely unwind the DNA prior to dissociation. The dimeric enzyme also binds DNA more like the full-length NS3 helicase. Finally, the dimer can displace streptavidin from biotin-labeled oligonucleotide, whereas monomeric NS3h cannot.

A KMT2A-AFF1 gene regulatory network highlights the role of core transcription factors and reveals the regulatory logic of key downstream target genes.

Regulatory interactions mediated by transcription factors (TFs) make up complex networks that control cellular behavior. Fully understanding these gene regulatory networks (GRNs) offers greater insight into the consequences of disease-causing perturbations than can be achieved by studying single TF binding events in isolation. Chromosomal translocations of the lysine methyltransferase 2A (KMT2A) gene produce KMT2A fusion proteins such as KMT2A-AFF1 (previously MLL-AF4), causing poor prognosis acute lymphoblastic leukemias (ALLs) that sometimes relapse as acute myeloid leukemias (AMLs). KMT2A-AFF1 drives leukemogenesis through direct binding and inducing the aberrant overexpression of key genes, such as the anti-apoptotic factor BCL2 and the proto-oncogene MYC. However, studying direct binding alone does not incorporate possible network-generated regulatory outputs, including the indirect induction of gene repression. To better understand the KMT2A-AFF1-driven regulatory landscape, we integrated ChIP-seq, patient RNA-seq, and CRISPR essentiality screens to generate a model GRN. This GRN identified several key transcription factors such as RUNX1 that regulate target genes downstream of KMT2A-AFF1 using feed-forward loop (FFL) and cascade motifs. A core set of nodes are present in both ALL and AML, and CRISPR screening revealed several factors that help mediate response to the drug venetoclax. Using our GRN, we then identified a KMT2A-AFF1:RUNX1 cascade that represses CASP9, as well as KMT2A-AFF1-driven FFLs that regulate BCL2 and MYC through combinatorial TF activity. This illustrates how our GRN can be used to better connect KMT2A-AFF1 behavior to downstream pathways that contribute to leukemogenesis, and potentially predict shifts in gene expression that mediate drug response.

Covalent organic frameworks for fluorescent sensing: Recent developments and future challenges

• This review introduces the classification of COFs according to different connection units. • This review analyzes and summarizes the structure and characterization methods of COFs. • The application of COFs in fluorescent sensors is highlighted. • The major challenges and limitations of the application of COFs in fluorescent sensors are further explored. • This review is helpful to expand the wide application of COFs in fluorescent sensors. Covalent-organic frameworks (COFs) is composed of organic units connected by strong covalent bonds. COFs have diverse structure, high porosity, high thermal and mechanical stability and controllable pore, good flexible and highly conjugated crystalline structure. Two-dimensional (2D) COFs nanosheet is similar to graphene, but it has periodic pores and lots of designable functional groups. The 2D COFs nanosheet also has a large specific surface area and good electrical conductivity owing to its highly conjugated crystalline structure. At the same time, COFs have the ability to replicate multiple identical binding sites through the whole extended frameworks. This ability shows that the signal can be effectively transduced and amplified through the framework to achieve high sensitivity when a single binding event occurs at one of the binding sites. Plenty of interesting investigations on the fluorescent sensors based on COFs have been reported through fluorescence enhancement or quenching resulted from this ability. So, the flexible 2D COFs nanosheets should be an excellent candidate to construct fluorescent sensors. This review first introduces the classification of COFs according to different connection units, and then analyzes and summarizes the structure and characterization methods of COFs. The application of COFs in fluorescent sensors is highlighted and the major challenges and limitations are further explored. The review in this paper is helpful to study the wide application of COFs in fluorescent sensors.

Enhancing the Sensitivity of Photoelectrochemical DNA Biosensing Using Plasmonic DNA Barcodes and Differential Signal Readout

AbstractPhotoelectrochemical biosensors hold great promise for sensitive bioanalysis; however, similar to their electrochemical analogues, they are highly affected by the variable backgrounds caused by biological matrices. We developed a new PEC biosensing strategy that uses differential signal generation, combining signals from two separate but correlated binding events on the biosensor, for improving the limit‐of‐detection, sensitivity, and specificity of PEC DNA biosensors in biological samples. In this assay, the binding of unlabeled target DNA is followed by the capture of a signal amplification barcode featuring a plasmonic nanoparticle. The interaction of the plasmonic barcode with the semiconductive building blocks of the biosensor results in significant signal amplification, and together with differential signal processing enhances the limit of detection and sensitivity of the assay by up to 15‐ and three‐fold, respectively, compared to the previously‐used PEC assays with a single binding event, demonstrating a limit of detection of 3 fM.

Enhancing the Sensitivity of Photoelectrochemical DNA Biosensing Using Plasmonic DNA Barcodes and Differential Signal Readout.

Photoelectrochemical biosensors hold great promise for sensitive bioanalysis; however, similar to their electrochemical analogues, they are highly affected by the variable backgrounds caused by biological matrices. We developed a new PEC biosensing strategy that uses differential signal generation, combining signals from two separate but correlated binding events on the biosensor, for improving the limit-of-detection, sensitivity, and specificity of PEC DNA biosensors in biological samples. In this assay, the binding of unlabeled target DNA is followed by the capture of a signal amplification barcode featuring a plasmonic nanoparticle. The interaction of the plasmonic barcode with the semiconductive building blocks of the biosensor results in significant signal amplification, and together with differential signal processing enhances the limit of detection and sensitivity of the assay by up to 15- and three-fold, respectively, compared to the previously-used PEC assays with a single binding event, demonstrating a limit of detection of 3 fM.

Investigating How the Restriction Endonuclease BcnI Flips on DNA

Restriction endonucleases (REases) are enzymes that cleave DNA at or near a site specified by a particular nucleotide sequence. in most cases, REases are remarkably specific, and these enzymes are indispensable laboratory tools used for genetic modification, manipulation and analysis. Type II REases are the most heavily utilized, with the Type IIP subtype accounting for the vast majority of enzymes used in molecular biology. Most Type IIP REases are homodimers that cleave palindromic DNA sequences, but there are a few exceptions. Notably, BcnI, an REase identified in Bacillus centrosporus, is active as a monomer and cleaves the pseudopalindromic sequence 5’-CC/SGG-5’ (where S stands for C or G). The BcnI monomer is capable of cleaving both versions of its restriction site, and it is thought to complete both cuts in a single binding event. In order for this to happen, BcnI must rotate about an axis perpendicular to the DNA strand after making the first cut to be correctly oriented to cleave the second strand. This “flipping” cannot be achieved without changing the mode of contact with the DNA backbone. Flipping on the DNA is a critical part of the mechanism of action for HIV reverse transcriptase, allowing this multifunctional protein to adopt the appropriate orientation for the substrate it is interacting with. Two models for flipping have been put forward - “hopping”, in which electrostatic interactions between the protein and DNA backbone are disturbed and the protein enters a pseudobound state, and “tumbling”, in which most electrostatic interactions remain intact and the protein-DNA complex remains compact. We have studied the activity of BcnI under various conditions using a multiplexed single-molecule DNA cleavage assay. Our results suggest that, unlike HIV-RT, BcnI uses the tumbling model for flipping on the DNA.

Probing Single-Molecule Binding Event by the Dynamic Counting and Mapping of Individual Nanoparticles.

Measuring binding processes at the single-molecule level underpin significant functions in understanding biological events. Single-nanoparticle imaging techniques are providing a new concept for mapping the heterogeneous behaviors and characterizations of individual dynamics such as molecule-molecule interactions. Here, we develop the optical imaging techniques for directly counting and monitoring the binding and motion events of single nanoparticles linked to the substrate via the specific and reversible interactions between biomolecules. The one-step digital immunoassay realizes the biomolecular detection based on dynamic counting of the single nanoparticle binding event to substrate with the bright-field imaging. The detection limit achieves 8.4 pg/mL for procalcitonin with detection time of 14 min. Meanwhile, we map the accurate trajectory of single nanoparticle switching between different target molecules among the x-y plane with the total internal reflection imaging technique, which reveals the spatial coordinates of single target molecules on the substrate surface with high spatial and temporal resolutions.

Nanomolar ATP binding to single myosin cross-bridges in rigor: a molecular approach to studying myosin ATP kinetics using single human cardiomyocytes.

Our knowledge in the field of cardiac muscle and associated cardiomyopathies has been evolving incrementally over the past 60 years and all was possible due to the parallel progress in techniques and methods allowing to take a fresh glimpse at an old problem. Here, we describe an exciting tool used to examine the various states of the human cardiac myosin at the single molecule level. By imaging single Alexa647-ATP binding to permeabilised cardiomyocytes using total internal reflection fluorescence (TIRF) microscopy, we are able to acquire large populations of events in a short timeframe (~ 5000 sites in ~ 10 min) and measure each binding event with high spatio-temporal resolution. The applied algorithm decomposes the point pattern of single molecule binding events into individually distinct binding sites that enables us to recover kinetic parameters, such as bound or free time per site. This single molecule binding approach is a useful tool used to examine muscle contractility. Of particular importance is its application to probing the dynamic lifetimes and proportion of myosins in the super-relaxed state in human cardiomyopathies.

The Emergence of Insect Odorant Receptor-Based Biosensors.

The olfactory receptor neurons of insects and vertebrates are gated by odorant receptor (OR) proteins of which several members have been shown to exhibit remarkable sensitivity and selectivity towards volatile organic compounds of significant importance in the fields of medicine, agriculture and public health. Insect ORs offer intrinsic amplification where a single binding event is transduced into a measurable ionic current. Consequently, insect ORs have great potential as biorecognition elements in many sensor configurations. However, integrating these sensing components onto electronic transducers for the development of biosensors has been marginal due to several drawbacks, including their lipophilic nature, signal transduction mechanism and the limited number of known cognate receptor-ligand pairs. We review the current state of research in this emerging field and highlight the use of a group of indole-sensitive ORs (indolORs) from unexpected sources for the development of biosensors.