Single-antenna Receivers Research Articles

Adaptive Jamming Mitigation in Single-Antenna Receivers With Spectral Analysis and Switchable Filtering

Adaptive Jamming Mitigation in Single-Antenna Receivers With Spectral Analysis and Switchable Filtering

GNSS Spoofing Detection for Single Antenna Receivers via CNR Variation Monitoring

GNSS Spoofing Detection for Single Antenna Receivers via CNR Variation Monitoring

GNSS spoofing detection method based on the intersection angle between two directions of arrival (IA‑DOA) for single-antenna receivers

GNSS spoofing detection method based on the intersection angle between two directions of arrival (IA‑DOA) for single-antenna receivers

Fast Antenna Array Calibration Using One External Receiver.

In multiple array communication or radar systems, waveform diversity can be utilized for beampattern design. However, one of the critical issues for such systems is the presence of mutual coupling, which degrades the beampattern design's quality. We address the calibration of the mutual coupling of transmit arrays by developing a new matrix-inversion-free algorithm that requires only a single antenna receiver. It has a very low computational complexity for accelerating the mutual coupling calibration compared to previous methods; therefore, it can be utilized for large array systems such as massive multiple-input-single-output (MISO) systems. The key idea here revolves around utilizing fast Fourier transform (FFT). This approach simplifies matrix calculations and reduces the number of multiplications required to compute the inverse of FFT. Moreover, the algorithm is applicable for high-power active radar calibration, since it incorporates a constant modulus training sequence. The application of the algorithm in MISO systems, including massive MISO, offers the potential for calibrating mutual coupling. It enables the precise measurement and compensation of mutual coupling effects, improving the signal quality and system performance in areas such as radars, mobile communications and more. We evaluated the proposed algorithm under various scenarios, compared it with the ground truth and showed that it achieves excellent performance with few computations.

A Novel Compute-and-Forward Relaying Method for Multi-Antenna Wireless Relay Networks.

Compute-and-Forward (CoF) is an innovative physical layer network coding strategy, designed to enable receivers in wireless communications to effectively utilize interference. The key idea of CoF is to implement integer combinations based on the codewords from multiple transmitters, rather than decoding individual source codewords. Although CoF is widely used in wireless relay networks, there are still some problems to be solved, such as rank failure, single antenna reception, and the shortest vector problem. In this paper, we introduce a successive extended CoF (SECoF) as a pioneering solution tailored for multi-source, multi-relay, and multi-antenna wireless relay networks. First, we analyze the traditional CoF, and design a SECoF method combining the concepts of matrix projection and successive interference cancellation, which overcomes the problem of CoF rate tending to zero and rank failure and improves the network performance. Secondly, we obtain an approximate solution to the integer-value coefficient vectors by using the LLL lattice-based resolution algorithm. In addition, we deduce the corresponding concise formulas of SECoF. Simulation results show that the SECoF has strong robustness and the approaches outperform the state-of-the-art methods in terms of computation rate, rank failure probability, and outage probability.

IRS-Driven Cybersecurity of Healthcare Cyber Physical Systems

Intelligent reflective surface (IRS) as one of the most potential 6G key technologies injects new vitality into the smart medical and health system by intelligently configuring the wireless communication environment and spawns the construction of a modern medical information system. Medical data security is a sensitive issue that hospitals are generally concerned about in recent years. There are great hidden dangers to information security in the environment of “cloud storage”. The IRS provides a new solution for enhancing the privacy and security of “cloud storage” medical file data, assisting in the efficient transmission and interconnection of information, and ensuring highly secure and uninterrupted services in healthcare-based cyber physical systems (CPS). Specifically, the modelling in this paper considers the situation where communication over multiple-input single-output (MISO) channel is eavesdropped by a patient spy holding a single antenna receiver, and additionally the patient spy is obscured by an obstacle. One of the multi-antenna base stations (BS) transmits independent data streams to doctors and keeps them secret from patient spies. By jointly optimizing the beamforming at the BS and the phase shift of the IRS reflection elements, the simulation analysis verifies that the introduction of IRS can effectively improve the privacy security of medical data.

Blind receiver design-based multi-dimensional stable distribution model using the EM algorithm

Multi-antenna receivers are a key technology for modern communication systems. Signal attenuation in the very low frequency (VLF) channel is a serious problem. In addition to high signal attenuation, the resulting noise on the VLF channel is non-Gaussian. Hence, to analyze and address the issue of the normal operation of the multi-antenna receiver in the VLF channel, we must study the signal detection problem in a multi-dimensional non-Gaussian fading channel. Motivated by the existing blind receiver in an underwater submarine single-antenna receiver, we study the signal detection and estimation algorithm under the fading channel for a multi-dimensional non-Gaussian noise model. In this study, we propose a blind receiver based on the expectation-maximization (EM) algorithm. The proposed blind receiver can reduce non-Gaussian noise. In addition, we propose a nonlinear receiver that can accurately receive the transmitted signal over the high-attenuation VLF communication systems. Numerical and simulation results over uncorrelated and correlated non-Gaussian channels confirm that the design of the proposed blind receiver is close to optimal, with low computation complexity.

Single terminal and double terminal coil shape analysis using capacitive power transmission for biomedical implant

• Miniaturized antenna for longer distance and power transfer for bioelectronics. • Wireless power technology with lower heating rising to power bioelectronics. • Use single transmitter antenna to generate capacitive and inductive coupling. • Inductive and capacitive antenna configuration comparison in heating, distance and power transfer. This paper proposed a transmitter antenna using single terminal coil shape design and receiver antenna using double terminal coil shape design (Cs-Cd) to enhance the electric and magnetic coupling for Capacitive Power Transfer system to achieve higher energy transmission. This method used only single transmitter antenna instead of two transmitter antennas for power transmission. This design configuration was compared with other four configurations using either capacitive power transfer or inductive power transfer. As a result, Cs-Cd configuration achieved higher receiving power at longer implantation distance and lower temperature heating compared to conventional inductive power configuration. This method showed a better approach to power wirelessly miniaturized implant medical device.

DoA Estimation With a Single Antenna and a Few Low-Cost Backscattering Tags

Backscatter radio utilizes the reflection that an electromagnetic wave undergoes when it impinges an unmatched-to-a-load antenna, in order to achieve ultra-low-power communication. This work exploits principles commonly found in the ultra-low-power, backscatter communication literature, offering multi-element array functionalities to a single-antenna receiver. A small number of simple, switching backscattering tags deployed in space, emulate a distributed, multi-element antenna array by copying a transmitter’s signal to distinct frequency bands. A receiver can then obtain independent observations of the same signal by discriminating said bands. Using the backscatter tag-based array, the direction of arrival (DoA) estimation problem is addressed without the cost of multiple RF front ends or hardware modifications, at either end of a wireless communication link. The feasibility of the idea was examined through both simulations and experimental deployments. An absolute error of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\approx 20$ </tex-math></inline-formula> degrees was observed when utilizing 5 custom-built backscattering tags, while simulations showed that more than 10 tags can offer error of less than 5 degrees.

Rotating Single-Antenna Spoofing Signal Detection Method Based on IPNN.

The traditional carrier-phase differential detection technology mainly relies on the spatial processing method, which uses antenna arrays or moving antennas to detect spoofing signals, but it cannot be applied to static single-antenna receivers. Aiming at this problem, this paper proposes a rotating single-antenna spoofing signal detection method based on the improved probabilistic neural network (IPNN). When the receiver antenna rotates at a constant speed, the carrier-phase double difference of the real signal will change with the incident angle of the satellite. According to this feature, the classification and detection of spoofing signals can be realized. Firstly, the rotating single-antenna receiver collects carrier-phase values and performs double-difference processing. Then, we construct an IPNN model, whose smoothing factor can be adaptively adjusted according to the type of failure mode. Finally, we use the IPNN model to realize the classification and processing of the carrier-phase double-difference observations and obtain the deception detection results. In addition, in order to reflect that the method has a certain practical value, we simulate the spoofing scenario of satellite signals and effectively identify abnormal satellite signals according to the detection results of the inter-satellite differential combination. Actual experiments indicate that the detection accuracy of the proposed method for spoofing signals reaches 98.84%, which is significantly better than the classical probabilistic neural network (PNN) and back-propagation neural network (BPNN), and the method can be implemented in fixed base station receivers for the real-time detection of forwarding spoofing.

RIS-Aided Joint Localization and Synchronization With a Single-Antenna Receiver: Beamforming Design and Low-Complexity Estimation

Reconfigurable intelligent surfaces (RISs) have attracted enormous interest thanks to their ability to overcome line-of-sight blockages in mmWave systems, enabling in turn accurate localization with minimal infrastructure. Less investigated are however the benefits of exploiting RIS with suitably designed beamforming strategies for optimized localization and synchronization performance. In this paper, a novel low-complexity method for joint localization and synchronization based on an optimized design of the base station (BS) active precoding and RIS passive phase profiles is proposed, for the challenging case of a single-antenna receiver. The theoretical position error bound is first derived and used as metric to jointly optimize the BS-RIS beamforming, assuming a priori knowledge of the user position. By exploiting the low-dimensional structure of the solution, a novel codebook-based robust design strategy with optimized beam power allocation is then proposed, which provides low-complexity while taking into account the uncertainty on the user position. Finally, a reduced-complexity maximum-likelihood based estimation procedure is devised to jointly recover the user position and the synchronization offset. Extensive numerical analysis shows that the proposed joint BS-RIS beamforming scheme provides enhanced localization and synchronization performance compared to existing solutions, with the proposed estimator attaining the theoretical bounds even at low signal-to-noise-ratio and in the presence of additional uncontrollable multipath propagation.

AN-aided beamforming for IRS-assisted SWIPT systems

This paper studies artificial noise (AN)-aided beamforming design in an intelligent reflecting surface (IRS)-assisted system empowered by simultaneous wireless information and power transfer (SWIPT) technique. Multiple power splitting (PS) single-antenna receivers simultaneously receive information and energy from a multi-antenna base station (BS). Although all users are legitimate, in each transmission interval only one receiver is authorized to receive information and the others are only allowed to harvest power which are considered as unauthorized receivers (URs). To prevent information decoding by URs, AN signal is transmitted from the BS. We adopt a non-linear model for energy harvesting. In the optimization problem, we minimize the total transmit power, and for this purpose, we utilize an alternating optimization (AO) algorithm. For the non-convex rank-one constraint for IRS phase shifts, we utilize a sequential rank-one constraint relaxation (SROCR) algorithm. In addition to single antenna URs scenario, we investigate multi-antenna URs scenario and evaluate their performance. Simulation results validate the effectiveness of using IRS.

Adaptive Opportunistic Spatial Modulation for Boosting Transmit Diversity

In this paper, we propose an adaptive opportunistic spatial modulation scheme (AOSM), in which, our unique opportunistic group-antenna-selection scheme is amalgamated with a simple phase alignment (PA) transmit pre-scaling to boost the transmit-diversity of SM. To characterize and analytically evaluate the AOSM, a comprehensive error performance analysis is presented with single antenna reception. We theoretically derive a tight upper-bound for the symbol error probability (SEP) in closed-form based on an improved union-bound. The exact explicit asymptotic formula of the SEP at high SNR is provided as well. These results demonstrate that the transmit-diversity of proposed AOSM-(multiple-input single-output) MISO scheme is not only successfully achieved, but also elevated to be equal to the number of antennas in each antenna group. Moreover, it also reveals an important performance trend: at high SNR, with a fixed number of transmit antennas and a given data-rate, the SEP performance of the AOSM-MISO scheme can be successively enhanced by utilizing less antennas groups and bigger size of the signal constellation, because of the increase in transmit-diversity. Furthermore, the PA-aided SM-MISO is a special case of our AOSM-MISO. We are the first to provide the exact transmit-diversity gain for this conventional system and show that the PA pre-scaling scheme only can not improve the transmit-diversity of SM. This result sharpens the empirical diversity approximation results proposed in the existing literature. Simulation results well validate the analytical derivations, and indicate that our AOSM system can effectively improve system performance with high transmit-diversity at low-complexity.

Low-Complexity Downlink Channel Estimation in mmWave Multiple-Input Single-Output Systems

This letter tackles the problem of channel estimation in mmWave multiple-input single-output systems, where users are equipped with single-antenna receivers. By leveraging broadcast transmissions in the downlink channel, two novel low-complexity estimation approaches are devised, able to operate even in presence of a reduced number of transmit antennas or limited bandwidth. Numerical results show that the proposed algorithms provide accurate estimates of the channel parameters, achieving at the same time about 50% complexity reduction compared to existing approaches.

Rate-Splitting Multiple Access for Downlink Multiuser MIMO: Precoder Optimization and PHY-Layer Design

Rate-Splitting Multiple Access (RSMA) has recently appeared as a powerful and robust multiple access and interference management strategy for downlink Multi-user (MU) multi-antenna communications. In this work, we study the precoder design problem for RSMA scheme in downlink MU systems with both perfect and imperfect Channel State Information at the Transmitter (CSIT) and assess the role and benefits of transmitting multiple common streams. Unlike existing works which have considered single-antenna receivers (Multiple-Input Single-Output–MISO), we propose and extend the RSMA framework for multi-antenna receivers (Multiple-Input Multiple-Output–MIMO) and formulate the precoder optimization problem with the aim of maximizing the Weighted Ergodic Sum-Rate (WESR). Precoder optimization is solved using Sample Average Approximation (SAA) together with the proposed vectorization and Weighted Minimum Mean Square Error (WMMSE) based approach. Achievable sum-Degree of Freedom (DoF) of RSMA is derived for the proposed framework as an increasing function of the number of transmitted common and private streams, which is further validated by the Ergodic Sum Rate (ESR) performance using Monte Carlo simulations. Conventional MU–MIMO based on linear precoders and Non-Orthogonal Multiple Access (NOMA) schemes are considered as baselines. Numerical results show that with imperfect CSIT, the sum-DoF and ESR performance of RSMA is superior to those of the two baselines, and is increasing with the number of transmitted common streams. Moreover, by better managing the interference, RSMA not only has significant ESR gains over baseline schemes but is more robust to CSIT inaccuracies, network loads and user deployments.

Optimization-Driven Hierarchical Learning Framework for Wireless Powered Backscatter-Aided Relay Communications

In this paper, we employ multiple wireless-powered relays to assist information transmission from a multi-antenna access point to a single-antenna receiver. The wireless relays can operate in either the passive mode via backscatter communications or the active mode via RF communications, depending on their channel conditions and energy states. We aim to maximize the overall throughput by jointly optimizing the transmit beamforming and the relays’ radio modes and operating parameters. Due to the non-convex and combinatorial problem structure, we develop a novel optimization-driven hierarchical deep deterministic policy gradient (H-DDPG) approach to adapt the beamforming and relay strategies. The optimization-driven H-DDPG algorithm firstly decomposes the binary relay mode selection into the outer-loop deep <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$Q$ </tex-math></inline-formula> -network (DQN) algorithm and then optimizes the continuous beamforming and relaying strategies by using the inner-loop DDPG algorithm. Secondly, to improve the learning efficiency, we integrate the model-based optimization into the inner-loop DDPG framework by providing a better-informed target estimation for DNN training. Simulation results reveal that these two special designs ensure a more stable learning performance and achieve a higher reward, up to 20%, compared to the conventional model-free DDPG approach.

Data Transmission Over Linear Time-Varying Channels

Many traditional data transmission schemes over wireless communication channels heavily rely on the assumption that channel state information is available. However, for time-varying channels it is not possible to reliably decide the validity of the previously performed channel estimate. Therefore, message transmission methods taking the time-varying nature of the communication channel into account must perform both data transmission and channel estimation simultaneously. This paper proposes two data transmission schemes over linear time-varying wireless communication channels with a single transmit antenna. In the first case we consider a single antenna receiver and in the second scenario the receiver is equipped with an antenna array. Both schemes rely on sparsity assumptions.

Transport safety: GNSS spoofing detection using the single-antenna receiver and the speedometer of a vehicle

Article presented the security issues of the means of transport which apply global navigation satellite systems, with a particular emphasis on transport safety and the risks resulting from the use of those systems. Presented method of detecting spoofing attacks of the global satellite navigation system involves collecting navigational position readings and comparing them with the current vehicle speed read from the vehicle's speedometer (SoV) and sequential testing of GNSS and SoV readings. Proposed a way automatic speedometer calibration to specified threshold value (D). A physical experiment was carried out to confirm the assumptions of the above-mentioned method, the results of which are that when the car appears in range of spoofer, its speed, as stated by the NMEA RMC readings, was equal to the spoofer speed (0 km/h).

A Matrix-Inverse-Free Implementation of the MU-MIMO WMMSE Beamforming Algorithm

The WMMSE beamforming algorithm is a popular approach to address the NP-hard weighted sum rate (WSR) maximization beamforming problem. Although it efficiently finds a local optimum, it requires matrix inverses, eigendecompositions, and bisection searches, operations that are problematic for real-time implementation. In our previous work, we considered the MU-MISO case with single-antenna receivers and effectively replaced such operations by resorting to a first-order method. Here, we consider the more general and challenging MU-MIMO case with multiple-antenna receivers. Our earlier approach does not generalize to this scenario and cannot be applied to replace all the hard-to-parallelize operations that appear in the MU-MIMO case. Thus, we propose to leverage a reformulation of the auxiliary WMMSE function given by Hu et al. By applying gradient descent and Schulz iterations, we formulate the first variant of the WMMSE algorithm applicable to the MU-MIMO case that is free from matrix inverses and other serial operations and hence amenable to both real-time implementation and deep unfolding. From a theoretical viewpoint, we establish its convergence to a stationary point of the WSR maximization problem. From a practical viewpoint, we show that in a deep-unfolding-based implementation, the matrix-inverse-free WMMSE algorithm attains, within a fixed number of iterations, a WSR comparable to the original WMMSE algorithm truncated to the same number of iterations, yet with significant implementation advantages in terms of parallelizability and real-time execution.

Statistical Beamforming Techniques for Power Domain NOMA System

Power-domain non-orthogonal multiple access (NOMA) assigns different power levels for near and far users in order to discriminate their signals by employing successive interference cancellation (SIC) at the near user. In this context, multiple-input-single-output NOMA (MISO-NOMA), where the base station (BS) is equipped with multiple antennas while each mobile user has a single antenna receiver, is shown to have a better overall performance by using the knowledge of instantaneous channel state information (CSI). However, this requires prior estimation of CSI using pilot transmission, which increases the transmission overhead. Moreover, its performance is severely degraded in the presence of CSI estimation errors. In this work, we provide statistical beamforming solutions for downlink power-domain NOMA that utilize only knowledge of statistical CSI, thus reducing the transmission overhead significantly. First, we derive the outage probabilities for both near and far users in the multi-user NOMA system without imposing strong assumptions, such as Gaussian or Chi-square distribution. This is done by employing the exact characterization of the ratio of indefinite quadratic form (IQF). Second, this work proposes two techniques to obtain the optimal solution for beam vectors which rely on the derived outage probabilities. Specifically, these two methods are based on (1) minimization of total beam power while constraining the outage probabilities to the QoS threshold, and (2) minimization of outage probabilities while constraining the total beam power. These proposed methods are non-convex function of beam vectors and, hence, are solved using numerical optimization via sequential quadratic programming (SQP). Since the proposed methods do not require pilot transmission for channel estimation, they inherit better spectral efficiency. Our results validate the theoretical findings and prove the supremacy of the proposed method.