Simultaneous Preconcentration Of Pb Research Articles

Simultaneous enrichment of inorganic and organic species of lead and mercury in pg L−1 levels by solid phase extraction online combined with high performance liquid chromatography and inductively coupled plasma mass spectrometry

Quantification of ultra-trace inorganic and organic species of lead and mercury in unpolluted environmental water is crucial to estimate the mobility, toxicity and bioavailability and interactions. Simultaneous pre-concentration of Pb and Hg species in pg L−1 levels followed by multi-elemental speciation analysis makes great sense to a large set of unstable samples because of time advantages. Herein simultaneous enrichment and speciation analysis of ultra-trace lead and mercury in water was developed by online solid-phase extraction coupled with high performance liquid chromatography and inductively coupled plasma mass spectrometry (SPE-HPLC-ICP-MS) for this aim. Pb(II), trimethyl lead (TML), triethyl lead (TEL), Hg(II), methylmercury (MeHg) and ethylmercury (EtHg) were baseline separated in 11 min under gradient elution using 5 mM l-cysteine (Cys) at pH 2.5 in the 0–1 and 4–15 min and 5 mM Cys + 0.5 mM tetrabutyl ammonium hydroxide solution at pH 2.5 in the 1–4 min. Lead and mercury species in 10 mL intact water samples were adsorbed on a 1 cm C18 enrichment column pre-conditioned with 10 mL of 1 mM 2-mercaptoethanol at 10 mL min−1, and then directly desorbed by the mobile phases. High enrichment factors (459 for Pb(II), 1248 for TML, 1627 for TEL, 2485 for Hg(II), 1984 for MeHg and 1866 for EtHg) were obtained with good relative standard deviations (<5%), leading to low LODs (0.001–0.011 ng L−1) and LOQs (0.004–0.036 ng L−1). Good accuracy of this method was validated by two certified reference materials of total lead in water (GBW08601) and total mercury in water (GBW08603) along with spiked recoveries (89–93%). The method was applied to analyze trace lead and mercury species in river, lake, tap and rain water, and purified and mineral water. Inorganic lead of 13–68 ng L−1 and inorganic mercury of 21–49 ng L−1 were measured in the nine water samples whereas TML, TEL and MeHg were not detected with 2–5 ng L−1 EtHg presented only in one river water and tap water.

Simultaneous pre-concentration of Pb and Sn in food samples and determination by atomic absorption spectrometry

A cloud point extraction (CPE) method has been developed for the pre-concentration and simultaneous determination of lead [Pb(II)] and tin [Sn(II)] using Acridine Orange as complexing reagent and mediated by nonionic surfactant (Triton X-114) by flame atomic absorption spectrometry (FAAS). The main factors affecting analytical performance of CPE have been investigated in detail. The extracted surfactant-rich phase was diluted with (1.0 mol L−1) nitric acid in methanol, prior to subjecting FAAS. The calibration graphs obtained from Pb(II) and Sn(II) were linear in the concentration ranges of 5–1,000 and 10–5,000 μg L−1 with detection limits of 1.40 and 2.86 μg L−1, respectively. The relative standard deviations for 10 replicates containing 25 μg L−1 of Pb(II) and Sn(II) were 2.15 and 2.50 %, respectively. The analytical procedure was verified by the analysis of the standard reference materials NWTMDA-61.2 (water-trace elements) and NIST SRM 1548a (typical diet). The developed method has been applied to the simultaneous determination of total Pb and Sn in canned food samples including juices, tomato paste, corn, and green pea.

Flame atomic absorption spectrometric determination of trace amounts of lead, cadmium and nickel in different matrixes after solid phase extraction on modified multiwalled carbon nanotubes

Abstract The potential of modified multiwalled carbon nanotubes (a solid-phase extraction sorbent), for the simultaneous separation and preconcentration of lead, cadmium and nickel; has been investigated. Lead, cadmium and nickel, were adsorbed quantitatively; on modified multiwalled carbon nanotubes (in the pH range of 2–4). Parameters influencing, the simultaneous preconcentration of Pb(II), Ni(II) and Cd(II) ions (such as pH of the sample, sample and eluent flow rate, type and volume of elution solution and interfering ions), have been examined and optimized. Under the optimum experimental conditions, the detection limits of this method. for Pb(II), Ni(II) and Cd(II) ions, were 0.32, 0.17 and 0.04 ng mL−1 in original solution, respectively. Seven replicate determinations, of a mixture of 2.0 μg mL−1 lead and nickel, and 1.0 μg mL−1 cadmium; gave a mean absorbance of 0.074, 0.151 and 0.310, with relative standard deviation 1.7%, 1.5% and 1.2%, respectively. The method has been applied, to the determination of trace amounts of lead, cadmium and nickel; in biological and water samples, with satisfactory results.