Simple Alkyl Research Articles

Mild and Metal-Free Protocol toward the Synthesis of Triarylmethanes by Reactions of (Hetero)Arylboronic Acids and ortho-Hydroxyarylaldehydes.

Herein, we have reported a metal-free, mild, and novel protocol for the synthesis of various triarylmethanes (TRAMs) in moderate to good yields via the reactions of aryl boronic acids and ortho-hydroxyarylaldehydes in the presence of stoichiometric amounts of Et3N in dichloroethane at 80 °C. Additionally, the synthetic utilities of few synthesized TRAMs were proven by carrying out bromination on the -OH-containing aryl part and followed by functionalization of bromine through a palladium-catalyzed Suzuki-Miyaura cross-coupling reaction with arylboronic acids in good yields. The -OH group was also alkylated and arylated through simple alkylation and Chan-Lam reaction, respectively.

Determination of biocatalytic parameters of a copper radical oxidase using real-time reaction progress monitoring.

An Auxiliary Activity Family 5 (AA5) copper-radical alcohol oxidase (AlcOx) with promiscuous activity towards simple alkyl and aromatic alcohols was evaluated using real-time reaction progress monitoring. Reaction kinetics using variable time normalization analysis (VTNA) were determined from reaction progress curves. By this approach, a detailed view of the entire reaction time course under various conditions was obtained and used to identify parameters that will inform further process optimization development. Optimal activity was found impacted by several factors, including reaction pH, oxygen saturation, and the source of a co-oxidant, either HRP or a chemical alternative, potassium ferricyanide. Analysis of reaction progress curves demonstrated that reaction stalling occurred as a result of oxygen depletion and from a loss of enzyme activity over time. The cooperativity between AlcOx, horseradish peroxidase (HRP), and catalase that result in enhanced reactivity was explored, with reaction pH being identified as a key factor for optimal activity. The results show that a process with HRP is more robust than with potassium ferricyanide, but that both oxidants likely activate AlcOx by a similar mechanism. The phenomenon of product inhibition was investigated for representative reactants, revealing that reaction inhibition was more significant for butyraldehyde than for benzaldehyde. Our analysis suggests that this is linked to the greater proportion in which butyraldehyde exists in the hydrated form.

Iron-catalyzed regioselective alkylation of 1,4-quinones and coumarins with functionalized alkyl bromides

A simple and efficient Fe-catalyzed regioselective alkylation of 1,4-quinones and coumarins, using functionalized alkyl bromides as alkylating reagents, has been developed. The reaction proceeds under mild conditions with the addition of alkyl bromides to a wide range of 1,4-quinone and coumarin derivatives with a broad substrate scope and wide functional group tolerance to provide the products in good yields. Further application of these strategies could be extended to important biologically active antimalarial lead drugs, such as plasmodione on a gram scale in a single step for medicinal purposes.

Step-growth polymerisation of alkyl acrylates via concomitant oxa-Michael and transesterification reactions

An auto-tandem catalytic approach towards the preparation of poly(ester–ether)s from simple alkyl acrylates and diols is introduced.

Porous organic polymer supported PdAg bimetallic catalyst for the hydrodeoxygenation of lignin-derived species

A nitrogen-riched porous organic polymer named as BA-M was synthesized by co-polymerization of benzene and aniline monomers with dimethoxymethane as cross-linker through a simple Friedel-Crafts alkylation reaction. A series of the porous organic polymer supported bimetallic PdAg nanoparticles catalysts were developed for the selective hydrodeoxygenation of lignin-derived species including vanillin, isoeugenol and so on. The remarkable catalytic performance with 100% conversion of vanillin and 100% selectivity to p-creosol were achieved over the Pd9Ag1/BA-M catalyst at mild condition (low hydrogen pressure and temperature). The Pd9Ag1/BA-M catalyst also showed excellent recyclability with the catalytic activity and selectivity being well preserved after six catalytic recycles. The interaction between metal nanoparticles and porous organic polymer support, together with the nitrogen species in porous organic polymer support were primarily responsible for the excellent catalytic performance of bimetallic PdAg catalysts.

Novel composite electrode material derived from hypercross-linked polymer of pyrene and polyaniline for symmetric supercapacitor

Abstract Herein, we report the fabrication of composite electrode (PyHCP-800/PANI) by two step method. Firstly, hypercross-linked polymer of pyrene (PyHCP) synthesized by a simple Friedel-Crafts alkylation method and subsequent carbonization at 800 °C to yield porous carbon of PyHCP (PyHCP-800). Secondly, polyaniline (PANI) was electrochemically grown on the surface of PyHCP-800. The synthesized PyHCP and PyHCP-800 was characterized by physicochemical characterization techniques. The composite shows excellent electrochemical behavior than pristine PyHCP-800 and PANI electrode. In three electrode system, PyHCP-800/PANI composite exhibits specific capacitance of 62.6 F g−1 at 0.1 A g−1. Also, the fabricated symmetric supercapacitor (SSC) device (PyHCP-800/PANI || PyHCP-800/PANI) delivers outstanding cycle life with 90.67% retention for 2000 cycles.

Cyclisation Reactions Involving Alkyl Enol Ethers

AbstractEnol ethers are a fascinating product class and valuable building blocks with versatile reactivities and synthetic applications. With the emergence of silyl enol ethers, the chemistry of simple alkyl enol ethers has received less attention and targeted reviews of their chemistry are scarce. Especially intramolecular reactions under participation of an enol ether function have never been specifically surveyed. The construction of cyclic scaffolds is arguably one of the most important and challenging tasks of the organic chemist and intramolecular cyclisations represent the most straight‐forward tool to achieve this goal. The potential of enol ether‐containing substrates to form oxygenated carbo‐ and heterocycles is obvious. The purpose of this review is to discuss their particular reactivity and to direct the reader's attention to how their unique properties have been harnessed by organic chemists for the construction of rings.magnified image

EMM-17, a New Three-Dimensional Zeolite with Unique 11-Ring Channels and Superior Catalytic Isomerization Performance.

A new catalytically active zeolite, designated EMM-17 (ExxonMobil Material-17), with a three-dimensional (3D) 11 × 10 × 10-ring topology has been discovered from high throughput experiments while evaluating a family of new organic structure directing agents (OSDAs), 1-alkyl-4-(pyrrolidin-1-yl)pyridin-1-ium hydroxide. The framework structure was determined by model building techniques and confirmed by diffraction calculations. The EMM-17 structure is a random intergrowth of two polymorphs which have a 3D arrangement of intersecting 11 × 10 × 10-ring pores. EMM-17 is stable to calcination to remove the OSDA and can be reproducibly synthesized in the presence of fluoride using common, inexpensive reagents over a wide Si/Al range from 15 to infinity, enabling the catalyst acidity to be tailored to almost any petrochemical application. Unlike OSDAs for many new zeolite structures, the OSDAs for EMM-17 are prepared in one simple alkylation step, making EMM-17 an easy to prepare, highly accessible, catalytically active zeolite. Zeolites containing odd numbered channel sizes are rare, and this is the first confirmed example of a 3D 11-ring aluminosilicate zeolite with a pore size in between those of the commercially important 10- and 12-ring zeolites such as ZSM-5 and Zeolite-Y, respectively. Catalysts prepared from EMM-17 exhibit significantly higher activity for catalytic isomerization with no loss in selectivity than current state of the art catalysts. Catalytic isomerization of linear to branched alkanes is a critical component of commercial dewaxing, allowing for the improvement of cold flow properties of hydrocarbon fuels and lubricants through selective hydroisomerization of normal paraffins.

Variedly connected 1,8-naphthalimide-7-chloroquinoline conjugates: Synthesis, anti-mycobacterial and cytotoxic evaluation

Recent disclosures about anti-bacterial and anti-tubercular potential of naphthalimide and quinoline core respectively propelled us to synthesize a library of 1,8-naphthalimide-7-chloroquinoline hybrids. Different modes of linkage between two pharmacophoric units viz. simple alkyl chains and induction of amide bond were used and the substituents on the naphthalimide core were varied in order to determine Structure-Activity-Relationship (SAR). Our findings demonstrated that simple alkyl chain linked conjugates showed better activity profiles without any cytotoxicity, while the inclusion of amide bond enhanced the cytotoxic tendency. An interesting behaviour of conjugates in terms of activity and cytotoxicity was observed via switching over the nature of linker between two pharmacophores.

Benzaldehyde- and Nickel-Catalyzed Photoredox C(sp3)-H Alkylation/Arylation with Amides and Thioethers.

Herein a synergistic combination of a nickel catalyst and benzaldehyde for the utilization of amides and thioethers in C(sp3)-H alkylation and arylation reactions employing simple aryl or alkyl halides is reported. This method provides a simple and cheap strategy for the direct functionalization of amides and thioethers. Readily available starting materials, mild reaction conditions, a good functional-group tolerance, and a broad substrate scope make this methodology attractive and practical for pharmaceutical and synthetic chemistry.

Ethynylphosphonamidates for the Rapid and Cysteine-Selective Generation of Efficacious Antibody-Drug Conjugates.

Requirements for novel bioconjugation reactions for the synthesis of antibody–drug conjugates (ADCs) are exceptionally high, since conjugation selectivity as well as the stability and hydrophobicity of linkers and payloads drastically influence the performance and safety profile of the final product. We report Cys‐selective ethynylphosphonamidates as new reagents for the rapid generation of efficacious ADCs from native non‐engineered monoclonal antibodies through a simple one‐pot reduction and alkylation. Ethynylphosphonamidates can be easily substituted with hydrophilic residues, giving rise to electrophilic labeling reagents with tunable solubility properties. We demonstrate that ethynylphosphonamidate‐linked ADCs have excellent properties for next‐generation antibody therapeutics in terms of serum stability and in vivo antitumor activity.

Carbazole-Bearing Porous Organic Polymers with a Mulberry-Like Morphology for Efficient Iodine Capture.

Three kinds of carbazole-based porous organic polymers were successfully prepared via simple Friedel-Crafts alkylation of 1,3,5-tri(9-carbazolyl)-benzene. External cross-linking agents named 1,4-bis(chloromethyl)-benzene, cyanuric chloride, and 1,4-dimethoxybenzene were selected, and the derived polymers (denoted as CSU-CPOPs-1, CSU-CPOPs-2, and CSU-CPOPs-3) gave high surface areas (up to 1032 m2/g) and good stability. Interestingly, varying the nature of "knitting" agents led to an unprecedented morphology evolution, and it is worth noting that a mulberry-like morphology was observed for the case of 1,4-bis(chloromethyl)-benzene. Taking advantage of the unique mulberry-like morphology as well as abundant porosity, CSU-CPOPs-1 showed ultrahigh iodine vapor adsorption performance with a capacity of 494 wt % at 348 K and 1 bar, which is the highest value reported to date for amorphous polymers. This study presented a feasible way to develop efficient iodine sorbents with tunable morphologies for addressing environmental issues.

Radical Addition to Strained σ-Bonds Enables the Stereocontrolled Synthesis of Cyclobutyl Boronic Esters.

While radical additions to π-bonds are well established, additions to σ-bonds are far less explored. We have found that electron deficient radicals derived from alkyl iodides under visible light irradiation add to the central strained bond of bicyclobutyl (BCB)-boronate complexes and lead to 1,3-alkyl disubstituted cyclobutyl boronic esters in high yields, with full stereospecificity and high levels of stereoselectivity. Novel cyclobutyl-substituted structures, including peptide and steroid boronic ester derivatives can be accessed. Additionally, although the use of electron-rich alkyl iodides as radical precursors was found to be ineffective, an alternative route involving alkylsulfonylation of the BCB-boronate followed by reductive desulfonylation provided access to simple alkyl substituted cyclobutane products.

Alkylation of Terminal Alkynes under Zinc Lewis Acid Catalysis and Its Mechanistic Studies

AbstractWith a zinc Lewis acid catalyst and proton sponge in toluene, terminal alkynes were found to undergo the alkylation by alkyl triflates to provide unsymmetrical internal alkynes. This is the first example that a simple alkyl chain other than benzylic and norbornyl units can be introduced onto the alkynyl carbon atom under Lewis acid catalysis. Mechanistic studies revealed that the activation of the alkyne by the zinc Lewis acid and proton sponge is the trigger of the reaction to give a monoalkynylzinc species, which successively reacts with the alkyl triflate to afford the internal alkyne. A radical pathway is unlikely in this system.magnified image

Intramolecular Energy Transfer in Dithienogermole Derivatives.

Dithienogermole (DTG) has been applied as a useful building unit of optical/semiconducting materials for organic optoelectronic devices because of its extended conjugation, high chemical stability, and good emissive properties. Although DTG has two substituents on the Ge atom, the substituents have been limited to simple alkyl and aryl groups in previous work. In this work, to further uncover the new functionalities of this useful building unit, various π-conjugated groups were introduced on Ge of DTG. It was expected that the introduction of π-conjugated groups would give rise to efficient energy transfer between the substituents and the DTG core, which are in proximity and linked by a Ge atom. The thus-prepared DTG compounds with fluorene, terthiophene, and pyrene units on Ge possessed well-separated frontier orbitals on the substituents and the DTG core, as proved by the absorption spectra and DFT calculations. The substituted DTG derivatives showed clear emission only from the energy acceptor even though the energy donor was photoexcited. This indicated the highly efficient energy transfer in these compounds. We also prepared more π-extended compound DTGFl2-Ph with phenyl groups on the DTG thiophene rings. DTGFl2-Ph showed strong emission in the visible region with efficient energy transfer properties. These results clearly indicate the potential application of the present DTG system as optical functional materials.

Design, Multigram Synthesis, and in Vitro and in Vivo Evaluation of Propylamycin: A Semisynthetic 4,5-Deoxystreptamine Class Aminoglycoside for the Treatment of Drug-Resistant Enterobacteriaceae and Other Gram-Negative Pathogens.

Infectious diseases due to multidrug-resistant pathogens, particularly carbapenem-resistant Enterobacteriaceae (CREs), present a major and growing threat to human health and society, providing an urgent need for the development of improved potent antibiotics for their treatment. We describe the design and development of a new class of aminoglycoside antibiotics culminating in the discovery of propylamycin. Propylamycin is a 4'-deoxy-4'-alkyl paromomycin whose alkyl substituent conveys excellent activity against a broad spectrum of ESKAPE pathogens and other Gram-negative infections, including CREs, in the presence of numerous common resistance determinants, be they aminoglycoside modifying enzymes or rRNA methyl transferases. Importantly, propylamycin is demonstrated not to be susceptible to the action of the ArmA resistance determinant whose presence severely compromises the action of plazomicin and all other 4,6-disubstituted 2-deoxystreptamine aminoglycosides. The lack of susceptibility to ArmA, which is frequently encoded on the same plasmid as carbapenemase genes, ensures that propylamycin will not suffer from problems of cross-resistance when used in combination with carbapenems. Cell-free translation assays, quantitative ribosome footprinting, and X-ray crystallography support a model in which propylamycin functions by interference with bacterial protein synthesis. Cell-free translation assays with humanized bacterial ribosomes were used to optimize the selectivity of propylamycin, resulting in reduced ototoxicity in guinea pigs. In mouse thigh and septicemia models of Escherichia coli, propylamycin shows excellent efficacy, which is better than paromomycin. Overall, a simple novel deoxy alkyl modification of a readily available aminoglycoside antibiotic increases the inherent antibacterial activity, effectively combats multiple mechanisms of aminoglycoside resistance, and minimizes one of the major side effects of aminoglycoside therapy.

Halide-Rebound Polymerization of Twisted Amides.

The first living polymerization of twisted amides is reported, achieved using simple primary alkyl iodides as initiators. Polymerization occurs through a halide-rebound mechanism in which the nucleophilic twisted amide is quaternized and subsequently ring-opened by the iodide counterion. The covalent electrophilic polymerization generates polymers with living chain ends that are both isolable and stable to ambient conditions, enabling the synthesis of block polymers. This presents a new class of polymers for study that possess high glass transition temperatures and robust thermal stability.

The Effect of β‐Hydrogen Atoms on Iron Speciation in Cross‐Couplings with Simple Iron Salts and Alkyl Grignard Reagents

AbstractThe effects of β‐hydrogen‐containing alkyl Grignard reagents in simple ferric salt cross‐couplings have been elucidated. The reaction of FeCl3 with EtMgBr in THF leads to the formation of the cluster species [Fe8Et12]2−, a rare example of a structurally characterized metal complex with bridging ethyl ligands. Analogous reactions in the presence of NMP, a key additive for effective cross‐coupling with simple ferric salts and β‐hydrogen‐containing alkyl nucleophiles, result in the formation of [FeEt3]−. Reactivity studies demonstrate the effectiveness of [FeEt3]− in rapidly and selectively forming the cross‐coupled product upon reaction with electrophiles. The identification of iron‐ate species with EtMgBr analogous to those previously observed with MeMgBr is a critical insight, indicating that analogous iron species can be operative in catalysis for these two classes of alkyl nucleophiles.

The Effect of β-Hydrogen Atoms on Iron Speciation in Cross-Couplings with Simple Iron Salts and Alkyl Grignard Reagents.

The effects of β-hydrogen-containing alkyl Grignard reagents in simple ferric salt cross-couplings have been elucidated. The reaction of FeCl3 with EtMgBr in THF leads to the formation of the cluster species [Fe8 Et12 ]2- , a rare example of a structurally characterized metal complex with bridging ethyl ligands. Analogous reactions in the presence of NMP, a key additive for effective cross-coupling with simple ferric salts and β-hydrogen-containing alkyl nucleophiles, result in the formation of [FeEt3 ]- . Reactivity studies demonstrate the effectiveness of [FeEt3 ]- in rapidly and selectively forming the cross-coupled product upon reaction with electrophiles. The identification of iron-ate species with EtMgBr analogous to those previously observed with MeMgBr is a critical insight, indicating that analogous iron species can be operative in catalysis for these two classes of alkyl nucleophiles.

Structurally simple trimesic amides as highly selective anion channels.

Trimesic amide molecules, which contain simple alkyl chains in their periphery, exhibit interesting anion-transport functions. The most active and highly selective channel TA12 efficiently transports ClO4- anions across membranes, with other anions conducted in the order of I- > NO3- > Br- > Cl-.