Similar Parameters Research Articles

Multi-scale magnetic field investigation of the M-dwarf eclipsing binary CU Cancri

Aims.We aim to characterise the magnetic field of the eclipsing binary CU Cancri, which consists of two M-dwarf components. The determination of the magnetic field parameters of this target enables comparisons with both observations of similar stars and theoretical predictions of the magnetic field strength in CU Cnc. The target therefore provides an excellent opportunity to test our understanding of the generation of magnetic fields in low-mass stars and its impact on stellar structure.Methods.We used spectropolarimetric observations obtained with ESPaDOnS at the CFHT to investigate the magnetic properties of CU Cnc. To improve the signal, we used least-squares deconvolution (LSD) to create average line profiles. From these LSD profiles, we extracted information about the radial velocities of the components, significantly expanding the number of radial velocity measurements available and allowing for a determination of the orbital parameters. StokesVLSD profiles were used with Zeeman Doppler imaging to obtain the large-scale magnetic field structures of the two components. We also used detailed polarised radiative transfer modelling to investigate the small-scale fields, by Zeeman-splitting magnetically sensitive Ti Ilines in non-polarised spectra.Results.We obtain both the small- and large-scale magnetic field properties of the two components. The large-scale fields are dominantly poloidal, and both components have an average strength of approximately 100 G. This analysis of the large-scale fields likely suffers from some amount of hemisphere degeneracy due to the high inclination of the target, which would cause the large-scale field strength of the components to be underestimated. Both components also show unusual magnetic field configurations compared to stars with similar parameters: the primary is weakly axisymmetric (∼10%), and the secondary has a strong toroidal contribution (∼20%). The small-scale fields are significantly stronger, 3.1 and 3.6 kG for the primary and secondary, respectively. This measurement is in excellent agreement with surface field strength predictions for CU Cnc from magneto-convective stellar evolution models. These results indicate that magnetic fields could play a significant role in the radius inflation due to convective inhibition.

Aligned fractures on asteroid Ryugu as an indicator of thermal fracturing

Context. Asteroid and comet surfaces are exposed to a complex environment that includes low gravity, high temperature gradients, and a bombardment of micrometeorites and cosmic rays. Surface material exposed to this environment evolves in a specific way depending on various factors such as the bodies’ size, heliocentric distance, and composition. Fractures in boulders, as seen on asteroid Ryugu, can help to determine and constrain the dominant processes eroding small-body surface materials. It is also possible to estimate fracture growth timescales based on the abundance and length of fractures in boulders. Aims. We analyse the number, orientation, and length of fractures on asteroid Ryugu to establish the relation between the fractures and the processes that may have formed them. We also compare our results to similar investigations conducted on other small bodies and estimate the timescale of fracture growth. Methods. 198 high-resolution Hayabusa2 images of asteroid Ryugu suitable for our fracture analysis were selected and map-projected. Within these images, fractures in boulders were manually mapped using the QGIS software. The fracture coordinates were extracted and the fractures’ orientation and length were computed for 1521 identified fractures. Results. Fractures in boulders on asteroid Ryugu are found to be preferentially north-south aligned, suggesting a formation through thermal erosion. Modeling the fracture length indicates a fracture growth timescale of 30 000 to 40 000 yr, slightly younger than ages found previously for asteroid Bennu. The errors in these ages, due to uncertainties about the thermophysical parameters used in this model, are substantial (−33 000 yr +250 000 yr). However, even with these large errors, the model suggests that thermal fracturing is a geologically fast process. These times are not too dissimilar to those quoted in the literature for Ryugu and Bennu, since similar thermophysical material parameters for Ryugu and Bennu seem likely.

Persistent fever in acute hepatitis: think beyond acute viral hepatitis

Background Acute hepatitis due to various tropical infections can mimic the clinical picture of acute viral hepatitis(AVH), leading to increased morbidity and mortality. We aimed to identify clinical and laboratory parameters that could help to distinguish acute hepatitis due to tropical infections from AVH. Methods We retrospectively analyzed our database of 150 children (107 boys) with AVH and 50 children(34 boys)with acute hepatitis due to tropical infections between January 2013 and March 2023. Clinical features, investigations, complications and outcomes were compared. Results Hepatitis A (75%) was the commonest etiology of AVH while enteric fever (34%), dengue (26%), scrub typhus (20%) and leptospirosis (16%) constituted the majority of tropical infections. Persistent fever and skin rashes were found in 88% and 16% of patients respectively in the tropical infection group and none in the AVH group (p < 0.001). On univariate analysis, prodromal symptoms, clinically detectable jaundice, cholestatic pattern, total and direct bilirubin and liver enzymes were significantly higher in AVH while headache, myalgia, leukopoenia, thrombocytopenia, hyponatremia were significantly higher in tropical infections group (all p < 0.05). Multivariate analysis identified thrombocytopenia (Odds ratio [OR] 4.237) as an independent positive predictive factor and markedly elevated total bilirubin (OR 0.575), direct bilirubin (OR 0.498), aspartate aminotransferase (OR 0.841) and alanine aminotransferase (OR 0.863) as independent negative predictive factors for acute hepatitis due to tropical infections. Conclusion High index of suspicion for tropical infections is warranted in patients with persistent fever after the onset of jaundice, especially in the presence of skin rash and thrombocytopenia. SUMMARY Acute viral hepatitis and acute hepatitis due to tropical infections can have similar clinical and biochemical parameters. Milder degree of jaundice, lower elevation of serum transaminases and thrombocytopenia can be useful predictors for acute hepatitis due to tropical infections.

Research on Voltage Sag Loss Assessment Based on a Two-Stage Taguchi Quality Perspective Method

Voltage sags resulting from symmetrical or asymmetrical faults pose a significant threat to power quality. In response to this challenge, a voltage sag loss assessment method based on a two-stage Taguchi quality perspective approach is proposed to address the quantitative analysis of voltage sag economic losses. Initially, using the Taguchi quality perspective method, single-index quality loss functions are separately established for voltage sag magnitude and fault duration. Subsequently, by introducing a comprehensive load tolerance curve, sensitivity parameters within the quality loss function are accurately calculated. This yields a deterministic model for voltage sag assessment. Building upon this, the relative impact of the two indices on voltage sag loss is evaluated using the quality loss function. Consequently, a comprehensive loss model under the influence of multiple indices is formed by integrating two single-index evaluation models. The simulation results indicate that this method can effectively assess the economic losses of voltage sags under the combined influence of multiple factors. Compared to the original economic loss assessment method, it improves quantitative accuracy by approximately 3.72%. Moreover, the method reduces the computational complexity of loss assessment through the consolidation of intervals with similar sensitivity parameters.

Recommendation of Tahiti acid lime cultivars through Bayesian probability models.

Probabilistic models enhance breeding, especially for the Tahiti acid lime, a fruit essential to fresh markets and industry. These models identify superior and persistent individuals using probability theory, providing a measure of uncertainty that can aid the recommendation. The objective of our study was to evaluate the use of a Bayesian probabilistic model for the recommendation of superior and persistent genotypes of Tahiti acid lime evaluated in 12 harvests. Leveraging the Monte Carlo Hamiltonian sampling algorithm, we calculated the probability of superior performance (superior genotypic value), and the probability of superior stability (reduced variance of the genotype-by-harvests interaction) of each genotype. The probability of superior stability was compared to a measure of persistence estimated from genotypic values predicted using a frequentist model. Our results demonstrated the applicability and advantages of the Bayesian probabilistic model, yielding similar parameters to those of the frequentist model, while providing further information about the probabilities associated with genotype performance and stability. Genotypes G15, G4, G18, and G11 emerged as the most superior in performance, whereas G24, G7, G13, and G3 were identified as the most stable. This study highlights the usefulness of Bayesian probabilistic models in the fruit trees cultivars recommendation.

Review of the Design and Operation Criteria of a DC Submerged Arc Discharge Carbon Nanostructure Synthesis Installation

The submerged arc discharge (SAD) allows the production of high-quality carbon nanostructures. The SAD method uses simple and inexpensive equipment. However, the carbon nanostructures obtained contain contaminants that are difficult to remove. The study of the published articles shows that reporting similar operating parameters informs quite different results. Reducing the generation of pollutants requires optimization of the design and the operation of installations. Nevertheless, the study of the state-of-the-art indicates that this aspect has been underestimated, which is manifested in the absence of publications on this subject. On the other hand, the increase in the production scale causes new problems that are not manifested in small-volume productions that are carried out in a research laboratory. The present work aims to analyze the SAD installation design and operation criteria to reduce the presence of contaminants. This study indicated that the key elements of the design and the operation are the electrodes alignment, feeding and attachment mechanisms, the electrode micropositioning system, the synthesis reactor design, the sensitive parameters control, the data acquisition system, and the selection of the liquid medium. Herein, these elements are analyzed and the best strategies for their design and operation are exposed. Those aspects relevant to scaling up of production are emphasized.

Evaluation of a new dynamic real-time visualization 25 kHz swept-source optical coherence tomography based biometer

BackgroundTo evaluate the intraobserver repeatability and interobserver reproducibility of a newly developed dynamic real-time visualization 25 kHz swept-source optical coherence tomography (SS-OCT) based biometer (ZW-30, TowardPi Medical Technology Ltd, China) and compare its agreement with another SS-OCT based biometer (IOLMaster 700, Carl Zeiss Meditec AG, Jena, Germany).MethodsEighty-two healthy right eyes were enrolled in this prospective observational study. Measurements were repeated for three times using the ZW-30 and IOLMaster 700 in a random order. Obtained parameters included axial length (AL), central corneal thickness (CCT), aqueous depth (AQD), anterior chamber depth (ACD), lens thickness (LT), mean keratometry (Km), astigmatism magnitude (AST), vector J0, vector J45, and corneal diameter (CD). The within-subject standard deviation (Sw), test–retest (TRT) variability, coefficient of variation (CoV), and intraclass correlation coefficient (ICC) were adopted to assess the intraobserver repeatability and interobserver reproducibility. The double-angle plot was also used to display the distribution of AST. To estimate agreement, Bland–Altman plots were used.ResultsFor the intraobserver repeatability and interobserver reproducibility, the Sw, TRT and CoV for all parameters were low. Meanwhile, the ICC values were all close to 1.000, except for the J45 (ICC = 0.887 for the intraobserver repeatability). The double-angle plot showed that the distribution of AST measured by these two devices was similar. For agreement, the Bland–Altman plots showed narrow 95% limits of agreements (LoAs) for AL, CCT, AQD, ACD, LT, Km AST, J0, J45, and CD (− 0.02 mm to 0.02 mm, − 7.49 μm to 8.08 μm, − 0.07 mm to 0.04 mm, − 0.07 mm to 0.04 mm, − 0.07 mm to 0.08 mm, − 0.16 D to 0.30 D, − 0.30 D to 0.29 D, − 0.16 D to 0.16 D, − 0.23 D to 0.13 D, and − 0.39 mm to 0.10 mm, respectively).ConclusionsThe newly dynamic real-time visualization biometer exhibited excellent intraobserver repeatability and interobserver reproducibility. The two devices both based on the SS-OCT principle had similar ocular parameters measurement values and can be interchanged in clinical practice.

Survival of Patients With Primary Cutaneous Melanoma (Stages 0-IIА and IIB-IIC), Depending on the Presence of the &lt;i&gt;BRAF&lt;/i&gt; Mutation in the Tumor and Surgical Treatment Option

Background: Cutaneous melanoma is an extremely aggressive disease with an unpredictable prognosis. Even among patients with similar tumor parameters and extent of surgical treatment, survival may vary. The extent of surgical resection of primary cutaneous melanoma is well-established, and a BRAF mutation in the tumor is an unfavorable prognostic factor for patient survival. The mutation presence is mainly used as a marker for prescribing targeted therapy. The impact of the extent of surgery and the method for restoring a tissue defect on survival of patients with similar stages remains unexplored. The impact of the BRAF mutation in the tumor on survival of patients with cutaneous melanoma depending on the surgery method has also not been studied. We analyzed the surgical treatment outcomes of 221 patients with primary cutaneous melanoma (stages 0-IIA and IIB-IIC) who were found to have the BRAF mutation and underwent different extents of tumor excision with closure of the surgical tissue defect.Objective: To analyze the impact of the BRAF mutation in the tumor on 5-year survival of patients with primary cutaneous melanoma (stages 0-IIA and IIB-IIC), depending on the extent of surgery and the method of replacing the tissue defect.Materials and methods: We used data from 221 patients with primary cutaneous melanoma (stages 0-IIA and IIB-IIC) and assessed their BRAF mutation status, extent of tumor excision, and method of closing the tissue defect. The patients were divided into 2 groups: the main group (wide excision of the tumor and plastic replacement of the tissue defect) and the comparison group (standard margin and linear closure of the tissue defect). After surgery, all the patients underwent tumor analysis for the BRAF p.V600E/K mutation using real-time PCR. DNA was isolated using the cobas® DNA Sample Preparation Kit on a cobas® z 480 analyzer. We used the following statistical methods: frequency analysis, z test to check the equality, and Kaplan-Meier survival analysis and such software as MedCalc 12.5 (1993-2013, MedCalc Software) and SPSS 26 (IBM Corp, 2019, IBM SPSS Statistics for Windows, Armonk, NY, USA). Results: Wide excision of primary cutaneous melanoma (stages 0-IIA and IIB-IIC) was found to increase 5-year progression-free survival in patients with subsequent plastic replacement of the tissue defect compared with patients with standard margin and linear closure of the tissue defect and 5-year overall survival in patients with stage 0-IIA melanoma. In patients with 0-IIA stage melanoma and positive BRAF mutation test results, wide excision with reconstructive and plastic defect closure improved the 5-year progression-free survival. Conclusions: The 5-year progression-free survival and 5-year overall survival increased by 20.9% (P = .005) and 13.0% (P = .031), respectively, in patients who underwent wide excision of primary cutaneous melanoma followed by plastic replacement of the tissue defect compared with patients with standard excision of primary tumors and linear closure of the tissue defect. The 5-year progression-free survival increased by 23.7% (P = .017) in patients with stage IIB-IIC melanoma, regardless of the BRAF mutation. In patients with 0-IIa stage melanoma and positive BRAF mutation test results who underwent wide excision, the 5-year progression-free survival increased by 20.7% (P = .047) compared with patients who underwent tumor excision with a standard margin.

New Insight into Food-Grade Emulsions: Candelilla Wax-Based Oleogels as an Internal Phase of Novel Vegan Creams.

Cream-type emulsions containing candelilla wax-based oleogels (EC) were analyzed for their physicochemical properties compared to palm oil-based creams (EP). The microstructure, rheological behavior, stability, and color of the creams were determined by means of non-invasive and invasive techniques. All the formulations exhibited similar color parameters in CIEL*a*b* space, unimodal-like size distribution of lipid particles, and shear-thinning properties. Oleogel-based formulations were characterized by higher viscosity (consistency index: 172-305 mPa·s, macroscopic viscosity index: 2.19-3.08 × 10-5 nm-2) and elasticity (elasticity index: 1.09-1.45 × 10-3 nm-2), as well as greater resistance to centrifugal force compared to EP. Creams with 3, 4, or 5% wax (EC3-5) showed the lowest polydispersity indexes (PDI: 0.80-0.85) 24 h after production and the lowest instability indexes after environmental temperature changes (heating at 90 °C, or freeze-thaw cycle). EC5 had particularly high microstructural stability. In turn, candelilla wax content ≥ 6% w/w accelerated the destabilization processes of the cream-type emulsions due to disintegration of the interfacial layer by larger lipid crystals. It was found that candelilla wax-based lipids had great potential for use as palm oil substitutes in the development of novel vegan cream analogues.

Molecular cloning, characterisation and molecular modelling of two novel T-synthases from mollusc origin.

The glycoprotein-N-acetylgalactosamine β1,3-galactosyltransferase, known as T-synthase (EC 2.4.1.122), plays a crucial role in the synthesis of the T-antigen, which is the core 1 O-glycan structure. This enzyme transfers galactose from UDP-Gal to GalNAc-Ser/Thr. The T-antigen has significant functions in animal development, immune response, and recognition processes. Molluscs are a successful group of animals that inhabit various environments, such as freshwater, marine, and terrestrial habitats. They serve important roles in ecosystems as filter feeders and decomposers but can also be pests in agriculture and intermediate hosts for human and cattle parasites. The identification and characterization of novel carbohydrate active enzymes, such as T-synthase, can aid in the understanding of molluscan glycosylation abilities and their adaptation and survival abilities. Here, the T-synthase enzymes from the snail Pomacea canaliculata and the oyster Crassostrea gigas are identified, cloned, expressed, and characterized, with a focus on structural elucidation. The synthesized enzymes display core 1 β1,3-galactosyltransferase activity using pNP-α-GalNAc as substrate and exhibit similar biochemical parameters as previously characterised T-synthases from other species. While the enzyme from C. gigas shares the same structural parameters with the other enzymes characterised so far, the T-synthase from P. canaliculata lacks the consensus sequence CCSD, which was previously considered indispensable.

Protein ensemble modeling and analysis with MMMx.

Proteins, especially of eukaryotes, often have disordered domains and may contain multiple folded domains whose relative spatial arrangement is distributed. The MMMx ensemble modeling and analysis toolbox (https://github.com/gjeschke/MMMx) can support the design of experiments to characterize the distributed structure of such proteins, starting from AlphaFold2 predictions or folded domain structures. Weak order can be analyzed with reference to a random coil model or to peptide chains that match the residue-specific Ramachandran angle distribution of the loop regions and are otherwise unrestrained. The deviation of the mean square end-to-end distance of chain sections from their average over sections of the same sequence length reveals localized compaction or expansion of the chain. The shape sampled by disordered chains is visualized by superposition in the principal axes frame of their inertia tensor. Ensembles of different sizes and with weighted conformers can be compared based on a similarity parameter that abstracts from the ensemble width.

Thin slice photon-counting CT coronary angiography compared to conventional CT: Objective image quality and clinical radiation dose assessment.

Photon-counting CT (PCCT) is the next-generation CT scanner that enables improved spatial resolution and spectral imaging. For full spectral processing, higher tube voltages compared to conventional CT are necessary to achieve the required spectral separation. This generated interest in the potential influence of thin slice high tube voltage PCCT on overall image quality and consequently on radiation dose. This study first evaluated tube voltages and radiation doses applied in patients who underwent coronary CT angiography with PCCT and energy-integrating detector CT (EID-CT). Next, image quality of PCCT and EID-CT was objectively evaluated in a phantom study simulating different patient sizes at these tube voltages and radiation doses. We conducted a retrospective analysis of clinical doses of patients scanned on a conventional and PCCT system. Average patient water equivalent diameters for different tube voltages were extracted from the dose reports for both EID-CT and PCCT. A conical phantom made of polyethylene with multiple diameters (26/31/36cm) representing different patient sizes and containing an iodine insert was scanned with a EID-CT scanner using tube voltages and phantom diameters that match the patient scans and characteristics. Next, phantom scans were made with PCCT at a fixed tube voltage of 120kV and with CTDIVOL values and phantom diameters identical to the EID-CT scans. Clinical image reconstructions at 0.6mm slice thickness for conventional CT were compared to PCCT images with 0.4mm slice thickness. Image quality was quantified using the detectability index (d'), which estimated the visibility of a 3mm diameter contrast-enhanced coronary artery by considering noise, contrast, resolution, and human visual perception. Alongside d', noise, contrast and resolution were also individually assessed. In addition, the influence of various kernels (Bv40/Bv44/Bv48/Bv56), quantum iterative reconstruction strengths (QIR, 3/4) and monoenergetic levels (40/45/50/55keV) for PCCT on d' was investigated. In this study, 143 patients were included: 47 were scanned on PCCT (120kV) and the remaining on EID-CT (74 small-sized at 70kV, 18 medium-sized at 80kV and four large-sized at 90kV). EID-CT showed 7%-17% higher d' than PCCT with Bv40 kernel and strength four for small/medium patients. Lower monoenergetic images (40keV) helped mitigate the difference to 1%-6%. For large patients, PCCT's detectability was up to 31% higher than EID-CT. PCCT has thinner slices but similar noise levels for similar reconstruction parameters. The noise increased with lower keV levels in PCCT (≈30% increase), but higher QIR strengths reduced noise. PCCT's iodine contrast was stable across patient sizes, while EID-CT had 33% less contrast in large patients than in small-sized patients. At 120kV, thin slice PCCT enables CCTA in phantom scans representing large patients without raising radiation dose or affecting vessel detectability. However, higher doses are needed for small and medium-sized patients to obtain a similar image quality as in EID-CT. The alternative of using lower mono-energetic levels requires further evaluation in clinical practice.

Isotope effects on transport characteristics of edge and core plasmas heated by neutral beam injection (NBI) in an inward shifted configuration at the Large Helical Device

Isotope effects have been investigated in Neutral Beam Injection (NBI) heated plasmas on the Large Helical Device with similar operational parameters between Hydrogen (H) and Deuterium (D) plasmas. Experimental results show that the global energy confinement has no significant dependence on the isotope mass under similar discharge conditions with nearly the same heating power, line-averaged density ( nˉe ) and magnetic field. For both electron and ion energy transport, the transport coefficients, which are obtained based on local power balance analysis, have analogous profiles between H and D dominant plasmas. For neoclassical χe and χi values, they are almost equal between H and D dominant plasmas in low nˉe discharges, whereas in high nˉe cases they are lower in H plasmas than those in D ones. At low nˉe , the electron and ion thermal transport in both H and D plasmas are dominated by neoclassical transport at a certain zone ( ρ≈0.6−0.85 ), while the anomalous transport process has primary effects in the remaining area, and the density fluctuations exhibit ion temperature gradient mode nature. With increase of nˉe , the anomalous transport becomes prevailing and the density fluctuations propagate along electron diamagnetic drift direction. Bispectral analysis reveals that the H plasma has stronger nonlinear coupling in edge density fluctuations in both low and high density discharges, which is probably due to that the D plasma has stronger damping rate for the nonlinear interaction of turbulence. For a comparative study, the present results have been compared with those observed in the ECRH discharges (Tanaka et al 2019 Nucl. Fusion 59 126040). The reasons for the similarities and dissimilarities between these two different heating manners are not clear yet. To unravel the underlying physics, essential inputs from theories and simulations are required.

Development of a planar ICP ion source for fusion based neutron generator

In this paper preliminary results of a new planar ICP ion source for neutron generator is investigated. This ion source has a cylindrical planar Aluminum plasma chamber. Set of Niobium permanent magnets have been arranged as multicusp geometry around the chamber to improve the plasma density and reduce the operational pressure. A copper made helical antenna has been used which is connected to the 2 kW 13.56 MHz radiofrequency power source including matching network. Preliminary results of ion beam measurements using 1 and 3 mm diameter apertures on plasma electrodes, represents improvement of ion current from μA range to mA with Helium operational gas. A primary result with Deuterium gas indicates that the ion current improves up to 7 mA by applying multicusp magnetic field around the plasma chamber at similar operational parameters with 1 kW of RF power. Theoretical and experiments are performed to regulate the optimum distance between plasma and the accelerating electrodes to have parallel deuteron ion beam at around 65 kV electrical potential between them. Accelerating electrode configuration which suppresses the secondary electron generated on the target surface is designed and fabricated based on the simulation results.

Automated assessment of cardiac pathologies on cardiac MRI using T1-mapping and late gadolinium phase sensitive inversion recovery sequences with deep learning

BackgroundA deep learning (DL) model that automatically detects cardiac pathologies on cardiac MRI may help streamline the diagnostic workflow. To develop a DL model to detect cardiac pathologies on cardiac MRI T1-mapping and late gadolinium phase sensitive inversion recovery (PSIR) sequences were used.MethodsSubjects in this study were either diagnosed with cardiac pathology (n = 137) including acute and chronic myocardial infarction, myocarditis, dilated cardiomyopathy, and hypertrophic cardiomyopathy or classified as normal (n = 63). Cardiac MR imaging included T1-mapping and PSIR sequences. Subjects were split 65/15/20% for training, validation, and hold-out testing. The DL models were based on an ImageNet pretrained DenseNet-161 and implemented using PyTorch and fastai. Data augmentation with random rotation and mixup was applied. Categorical cross entropy was used as the loss function with a cyclic learning rate (1e-3). DL models for both sequences were developed separately using similar training parameters. The final model was chosen based on its performance on the validation set. Gradient-weighted class activation maps (Grad-CAMs) visualized the decision-making process of the DL model.ResultsThe DL model achieved a sensitivity, specificity, and accuracy of 100%, 38%, and 88% on PSIR images and 78%, 54%, and 70% on T1-mapping images. Grad-CAMs demonstrated that the DL model focused its attention on myocardium and cardiac pathology when evaluating MR images.ConclusionsThe developed DL models were able to reliably detect cardiac pathologies on cardiac MR images. The diagnostic performance of T1 mapping alone is particularly of note since it does not require a contrast agent and can be acquired quickly.

Effect of male HBV infection on the outcomes of IVF/ICSI cycles: a retrospective cohort study based on propensity score matching.

This study aimed to investigate the effects of male hepatitis B virus (HBV) infection on male fertility, embryonic development, and in vitro fertilization/intracytoplasmic sperm injection (IVF/ICSI) outcomes. We performed a retrospective cohort study that included 3965 infertile couples who received fresh embryo transfer cycles for the first time at the Fujian Maternity and Child Health Hospital (Fuzhou, China) from January 2018 to January 2021. Infertile couples were categorized based on their HBV infection status into the HBV group (HBV-positive men and HBV-negative women) and the control group (HBV-negative couples). A 1:1 propensity score matching was performed with relatively balanced covariates. Baseline characteristics, semen parameters, laboratory outcomes, clinical outcomes, and obstetric and neonatal outcomes were compared between groups. After propensity score matching, 821 couples were included in each group. Both groups had similar semen parameters and obstetric and neonatal outcomes. The HBV group showed a significantly lower live birth rate than the control group ( P < 0.05). The HBV group had a significantly higher abortion rate than the control group ( P < 0.05). The rates of high-quality embryos and blastocyst formation were significantly lower in the HBV group than those in the control group (both P < 0.05). In conclusion, in couples who undergo IVF/ICSI, male HBV infection reduces the live birth rate and increases the risk of miscarriage. However, the incidence of low birth weight in women with IVF/ICSI does not increase with male HBV infection.

A Hybrid Cryptosystem Incorporating a New Algorithm for Improved Entropy.

Today, safeguarding sensitive content through encryption is crucial. This work presents a hybrid cryptosystem for images that employs both asymmetric and symmetric encryption. The asymmetric component involves applying the Diffie-Hellman protocol and the ElGamal cryptosystem to securely transmit two constants. These constants are necessary for the symmetrical aspect to generate dynamic permutations, substitution boxes, and round keys. Following an encryption process with fourteen rounds, the encrypted images are processed by an algorithm proposed to enhance entropy, a critical metric for assessing encryption quality. It increases the frequencies of the basic colors to achieve a histogram closely resembling a uniform distribution, but it increases the image size by approximately 8%. This improves the entropy values achieved by the hybrid cryptosystem, bringing them remarkably close to the ideal value of 8.0. In specific instances, the entropy values were elevated from 7.99926 to 8.0. The proposed method exhibits resilience against various attacks, including differential, linear, brute force, and algebraic attacks, as evaluated through the entropy, correlation, goodness of fit, Discrete Fourier Transform (DFT), Number of Pixels Change Rate (NPCR), Unified Average Changing Intensity (UACI), Avalanche Criteria (AC), contrast, energy, and homogeneity. Further, encrypted images are subjected to noise attacks ranging from 20% to 50% noise, including additive, multiplicative, occlusion noise, as well as the newly introduced χ2 noise. The noise damage is quantified using the proposed Similarity Parameter (SP), and a 3 × 3 median filter is employed to enhance the visual quality.

Research on the End-Milling Surface Quality of Paulownia Based on Response Surface Model in Terms of Force and Chip Morphology

To investigate the impact of different milling parameters on milling forces, chip morphology, and machined surface quality during the Paulownia milling process, we conducted experiments using cemented carbide single-tooth shank milling cutters. Additionally, we established a response surface model (RSM) to analyze milling surface quality. The key findings are as follows: milling forces along the parallel and tangential axes decrease with an increased tool rake angle and spindle’s rotational frequency, but they exhibit a positive correlation with milling depth. The effect of spindle’s rotational frequency on the milling force along the lateral axis differs due to the complex fiber characteristics of Paulownia. As milling depth decreases, chip morphology transitions from a block structure to a sheet structure, eventually becoming fragmented with shallow milling. Higher spindle’s rotational frequency and tool rake angle lead to a more fragmented direction in Paulownia chip morphology, while machined surface quality improves. Notably, under specific conditions, a striped chip morphology significantly enhances machined surface quality compared to similar milling parameters. The established RSM for machined Paulownia surface roughness is reliable and holds reference value for inhibiting surface damage in Paulownia machining.

Effects of TiC0.4 and Ti addition on the microstructures and mechanical properties of TiC composites

TiC-14 wt%TiC0.4 and TiC-7.63 wt%Ti ceramics were fabricated by spark plasma sintering (SPS) at a sintering temperature of 1600 °C and an applied pressure of 40 MPa. The impact of ex-situ addition and in-situ formation of vacancies on the microstructures and mechanical properties of TiC composites were investigated. The microstructures were analysed by XRD, SEM, EDS and TEM. The results reveal that TiC1-x phases with different Ti/C ratios exist in the TiC-14 wt%TiC0.4 ceramics, which have the same crystal structure and similar lattice parameters. In contrast, only a single phase of TiC1-y exists in the TiC-7.63 wt%Ti ceramics. The introduced carbon vacancies not only lowered the sintering temperature, but also had a toughening effect on the material. At a sintering temperature of 1600 °C, the TiC-14 wt%TiC0.4 and TiC-7.63 wt%Ti materials had densities of 98.5% and 99.2%, both materials exhibited excellent mechanical properties Vickers hardness and fracture toughness of 22.5 GPa, 5.2 MPa m1/2 and 23.5 GPa, 4.9 MPa m1/2, respectively.

Clinical and Polysomnographic Characteristics of Adult Patients with Suspected Obstructive Sleep Apnea from Different Sleep Clinics at a Single Tertiary Center.

The characteristics of patients across different sleep clinics may vary because they selectively visit specific specialists on the basis of their primary symptoms. This study aimed to compare the clinical and polysomnography (PSG) features of patients with suspected obstructive sleep apnea (OSA) at three sleep specialty clinics (otolaryngology [ENT], neurology [NR], and psychiatry [PSY]). We retrospectively analyzed the medical records and PSG reports of adult patients who underwent full-night PSG between January 2022 and June 2023 at a tertiary medical center. The demographic, questionnaire, and PSG variables were compared. Of the 407 patients, 83.0% exhibited sleep-disordered breathing (apnea-hypopnea index ≥ 5) with varying severity among the specialty pathways. Patients in the ENT group (n = 231) were the youngest and had the shortest sleep latency and most severe OSA markers with the highest positive airway pressure (PAP) acceptance, while those in the NR group (n = 79) had similar OSA-related PSG parameters to those in the ENT group but were older and had more OSA-related comorbidities, although their PAP acceptance was relatively low. The PSY group (n = 97) included a significant proportion of patients with normal or mild OSA, a female majority, high levels of depression, and subjective sleep distress. Our results highlight the multidisciplinary aspects of sleep medicine and diverse patients, and specialist needs for diagnosing sleep disorders and PAP acceptance. Exploring the potential differences in prognosis and treatment responses across various sleep specialty clinics would facilitate the development of personalized strategies.