Significant Kinetic Isotope Effect Research Articles

Synthesis of Deuterated and Sulfurated Polymers by Inverse Vulcanization: Engineering Infrared Transparency via Deuteration.

The synthesis of deuterated, sulfurated, proton-free, glassy polymers offers a route to optical polymers for infrared (IR) optics, specifically for midwave IR (MWIR) photonic devices. Deuterated polymers have been utilized to enhance neutron cross-sectional contrast with proteo polymers for morphological neutron scattering measurements but have found limited utility for other applications. We report the synthesis of perdeuterated d14-(1,3-diisopropenylbenzene) with over 99% levels of deuteration and the preparation of proton-free, perdeuterated poly(sulfur-random-d14-(1,3-diisopropenylbenzene)) (poly(S-r-d14-DIB)) via inverse vulcanization with elemental sulfur. Detailed structural analysis and quantum computational calculations of these reactions demonstrate significant kinetic isotope effects, which alter mechanistic pathways to form different copolymer microstructures for deutero vs proteo poly(S-r-DIB). This design also allows for molecular engineering of MWIR transparency by shifting C-H bond vibrations around 3.3 μm/3000 cm-1 observed in proteo poly(S-r-DIB) to 4.2 μm/2200 cm-1. Furthermore, the fabrication of thin-film MWIR optical gratings made from molding of deuterated-sulfurated, proton-free poly(S-r-d14-DIB) is demonstrated; operation of these gratings at 3.39 μm is achieved successfully, while the proteo poly(S-r-DIB) gratings are opaque at these wavelengths, highlighting the promise of MWIR sensors and compact spectrometers from these materials.

Deuterium Solvent Kinetic Isotope Effect on Enzymatic Methyl Transfer Catalyzed by Catechol O-methyltransferase.

Catechol o-methyltransferase plays a key role in the metabolism of catecholamine neurotransmitters. At present, its catalytic mechanism, overall structure, and kinetic characteristics have been basically clarified, but few people have paid attention to the function of solvents on enzymatic methyl transfer reactions. The influence of solvents on enzymatic reactions has always been a fuzzy hot topic. In addition, as a well-studied typical methyltransferase, COMT is a good test bed for exploring the source of the solvent isotope effect, which is a powerful tool in enzymatic mechanism research. We have measured the kinetic parameters of methyl transfer catalyzed by COMT in both normal water (H2O) and heavy water (D2O) by high-performance liquid chromatography (HPLC) in the range of pL 6 ~ 11. The kinetic characteristics of COMT in H2O and D2O were significantly different under different pH/pD conditions. Significant solvent kinetic isotope effects (SKIE) were obtained, especially inverse solvent kinetic isotope effects (SKIE < 1) were observed in this methyl transfer reaction for the first time. Traditional factors which could interpret the solvent isotope effect were ruled out. It's suggested that the solvent might affect the overall conformation as well as the flexibility of protein through non-covalent forces, thus altering the catalytic activity of COMT and leading to the solvent isotope effect.

Effects of hydrogen bonding on intramolecular/intermolecular proton-coupled electron transfer using a Ruthenium-anthraquinone dyad in ultrafast time domain

A ruthenium-anthraquinone dyad consisting of the bi-imidazole spacer in which one imidazole proton acts as a hydrogen bonding agent is employed to investigate the effects of H-bonding on both photo-induced electron transfer (PET) and proton-coupled electron transfer process (PCET). The H-bonding of the anthraquinone radical anion (AQ•-) with a bi-imidazole spacer in complex 1 generated by the electron transfer reduction of complex 1 is indicated by the symbolic anodic shift of the reduction potential of anthraquinone. The present investigation has established that the arrangement of an intramolecular H-bond between the attached AQ and the imidazole proton consequences in a notable increase in the rate of intramolecular electron transfer from Ru(II) to AQ. Further, we have also demonstrated the ultrafast electron transfer and PCET dynamics in presence of water. We have successfully detected the transient absorption photoproduct Ru(III) by which we could determine the time constants of each step which is rare in literature. Most importantly, our study demonstrates electron transfer and intra-molecular PCET dynamics in the femtosecond time domain. The results of the steady-state and transient absorption spectroscopic studies suggest that bi-imidazole spacer and water molecules have a significant role in both PET and PCET dynamics as a proton source in the excited state. We have demonstrated PCET reaction in ultrafast time scale using Ru-polypyridyl complex, with significant kinetic isotope effect.

Enrichment of hepatic glycogen and plasma glucose from H₂18 O informs gluconeogenic and indirect pathway fluxes in naturally feeding mice.

Deuterated water (2 H2 O) is a widely used tracer of carbohydrate biosynthesis in both preclinical and clinical settings, but the significant kinetic isotope effects (KIE) of 2 H can distort metabolic information and mediate toxicity. 18 O-water (H2 18 O) has no significant KIE and is incorporated into specific carbohydrate oxygens via well-defined mechanisms, but to date it has not been evaluated in any animal model. Mice were given H2 18 O during overnight feeding and 18 O-enrichments of liver glycogen, triglyceride glycerol (TG), and blood glucose were quantified by 13 C NMR and mass spectrometry (MS). Enrichment of oxygens 5 and 6 relative to body water informed indirect pathway contributions from the Krebs cycle and triose phosphate sources. Compared with mice fed normal chow (NC), mice whose NC was supplemented with a fructose/glucose mix (i.e., a high sugar [HS] diet) had significantly higher indirect pathway contributions from triose phosphate sources, consistent with fructose glycogenesis. Blood glucose and liver TG 18 O-enrichments were quantified by MS. Blood glucose 18 O-enrichment was significantly higher for HS versus NC mice and was consistent with gluconeogenic fructose metabolism. TG 18 O-enrichment was extensive for both NC and HS mice, indicating a high turnover of liver triglyceride, independent of diet. Thus H2 18 O informs hepatic carbohydrate biosynthesis in similar detail to 2 H2 O but without KIE-associated risks.

Selective Oxidations Using a Cytochrome P450 Enzyme Variant Driven with Surrogate Oxygen Donors and Light.

Cytochrome P450 monooxygenase enzymes are versatile catalysts, which have been adapted for multiple applications in chemical synthesis. Mutation of a highly conserved active site threonine to a glutamate can convert these enzymes into peroxygenases that utilise hydrogen peroxide (H2O2). Here, we use the T252E‐CYP199A4 variant to study peroxide‐driven oxidation activity by using H2O2 and urea‐hydrogen peroxide (UHP). We demonstrate that the T252E variant has a higher stability to H2O2 in the presence of substrate that can undergo carbon‐hydrogen abstraction. This peroxygenase variant could efficiently catalyse O‐demethylation and an enantioselective epoxidation reaction (94 % ee). Neither the monooxygenase nor peroxygenase pathways of the P450 demonstrated a significant kinetic isotope effect (KIE) for the oxidation of deuterated substrates. These new peroxygenase variants offer the possibility of simpler cytochrome P450 systems for selective oxidations. To demonstrate this, a light driven H2O2 generating system was used to support efficient product formation with this peroxygenase enzyme.

Validating experiments for the reaction H2 + NH2- by dynamical calculations on an accurate full-dimensional potential energy surface.

Ion-molecule reactions play key roles in the field of ion related chemistry. As a prototypical multi-channel ion-molecule reaction, the reaction H2 + NH2- → NH3 + H- has been studied for decades. In this work, we develop a new globally accurate potential energy surface (PES) for the title system based on hundreds of thousands of sampled points over a wide dynamically relevant region that covers long-range interacting configuration space. The permutational invariant polynomial-neural network (PIP-NN) method is used for fitting and the resulting total root mean squared error (RMSE) is extremely small, 0.026 kcal mol-1. Extensive dynamical and kinetic calculations are carried out on this PIP-NN PES. Impressively, a unique phenomenon of significant reactivity suppression by exciting the rotational mode of H2 is reported, supported by both the quasi-classical trajectory (QCT) and quantum dynamics (QD) calculations. Further analysis uncovers that exciting the H2 rotational mode would prevent the formation of the reactant complex and thus suppress the reactivity. The calculated rate coefficients for H2/D2 + NH2- agree well with the experimental results, which show an inverse temperature dependence from 50 to 300 K, consistent with the capture nature of this barrierless reaction. The significant kinetic isotope effect observed by experiments is well reproduced by the QCT computations as well.

Mechanistic Study of the Activation and the Electrocatalytic Reduction of Hydrogen Peroxide by Cu-tmpa in Neutral Aqueous Solution.

Hydrogen peroxide plays an important role as an intermediate and product in the reduction of dioxygen by copper enzymes and mononuclear copper complexes. The copper(II) tris(2‐pyridylmethyl)amine complex (Cu‐tmpa) has been shown to produce H2O2 as an intermediate during the electrochemical 4‐electron reduction of O2. We investigated the electrochemical hydrogen peroxide reduction reaction (HPRR) by Cu‐tmpa in a neutral aqueous solution. The catalytic rate constant of the reaction was shown to be one order of magnitude lower than the reduction of dioxygen. A significant solvent kinetic isotope effect (KIE) of 1.4 to 1.7 was determined for the reduction of H2O2, pointing to a Fenton‐like reaction pathway as the likely catalytic mechanism, involving a single copper site that produces an intermediate copper(II) hydroxo species and a free hydroxyl radical anion in the process.

Isotope Effects and the Mechanism of Photoredox-Promoted [2 + 2] Cycloadditions of Enones.

13C kinetic isotope effects (KIEs) for the photoredox-promoted [2 + 2] cycloaddition of enones were determined in homocoupling and heterocoupling examples. The only significant KIEs were observed at the β carbon, indicating that Cβ-Cβ bond formation is irreversible. However, these KIEs were much lower than computational predictions, suggesting that product selectivity is determined in part by a step prior to Cβ-Cβ bond formation. The results are explained as arising from a competition between C-C bond formation and electron exchange between substrate alkenes. This idea is supported by a relatively small substituent effect on substrate selectivity. The possible rates for electron transfer and bond-forming steps are analyzed, and the competition appears plausible, particularly if the mechanism involves a complex between reduced and neutral enone molecules.

Catalytic Carbon–Carbon Bond Activation of Saturated and Unsaturated Carbonyl Compounds via Chelate-Assisted Coupling Reaction with Indoles

The chelate assistance strategy was devised to promote a highly regioselective catalytic C–C bond activation reaction of saturated and unsaturated carbonyl compounds. The cationic Ru–H complex 1 was found to be an effective catalyst for mediating the coupling reaction of 1,2-disubstituted indoles with α,β-unsaturated aldehydes and ketones, in which the regioselective Cα–Cβ activation of the carbonyl substrates has been achieved in forming the 3-alkylindole products. The analogous coupling reaction of indoles with saturated aldehydes and ketones directly led to the Cα–Cβ cleavage of the carbonyl substrates in forming the 3-alkylindole products. The coupling reaction of 1,2-dimethylinole with (E)-3-nonen-2-one and 2-propanol-d8 showed 20–22% of deuterium incorporation to both α- and β-CH2 of the 3-alkylindole product. The coupling reaction of 1,2-dimethylinole with (E)-3-nonen-2-one exhibited the most significant carbon kinetic isotope effect on the α-carbon of the product (Cα = 1.046). The Hammett plot constructed from the reaction of 1,2-dimethylinole with a series of para-substituted enones p-X-C6H4CH═CHCOCH3 (X = OMe, Me, H, Cl, CF3) showed a modest promotional effect by an electron-donating group (ρ = −0.2 ± 0.1). Several catalytically relevant Ru–H species were detected by NMR from a stoichiometric reaction mixture of the Ru–H complex 1 with 1,2-dimethylindole and (E)-3-nonen-2-one in CD2Cl2. These results support a mechanism of the catalytic coupling reaction via conjugate addition of indoles to enones followed by the C–C bond activation and hydrogenolysis steps.

Kinetic Isotope Effects: Interpretation and Prediction Using Degrees of Rate Control

Kinetic isotope effects (KIEs) have been used for decades in catalysis research as a tool for clarifying reaction mechanisms. Significant primary kinetic isotope effects have usually been interpret...

The Critical Role of Reductive Steps in the Nickel‐Catalyzed Hydrogenolysis and Hydrolysis of Aryl Ether C−O Bonds

AbstractThe hydrogenolysis of the aromatic C−O bond in aryl ethers catalyzed by Ni was studied in decalin and water. Observations of a significant kinetic isotope effect (kH/kD=5.7) for the reactions of diphenyl ether under H2 and D2 atmosphere and a positive dependence of the rate on H2 chemical potential in decalin indicate that addition of H to the aromatic ring is involved in the rate‐limiting step. All kinetic evidence points to the fact that H addition occurs concerted with C−O bond scission. DFT calculations also suggest a route consistent with these observations involving hydrogen atom addition to the ipso position of the phenyl ring concerted with C−O scission. Hydrogenolysis initiated by H addition in water is more selective (ca. 75 %) than reactions in decalin (ca. 30 %).

The Critical Role of Reductive Steps in the Nickel-Catalyzed Hydrogenolysis and Hydrolysis of Aryl Ether C-O Bonds.

The hydrogenolysis of the aromatic C−O bond in aryl ethers catalyzed by Ni was studied in decalin and water. Observations of a significant kinetic isotope effect (k H/k D=5.7) for the reactions of diphenyl ether under H2 and D2 atmosphere and a positive dependence of the rate on H2 chemical potential in decalin indicate that addition of H to the aromatic ring is involved in the rate‐limiting step. All kinetic evidence points to the fact that H addition occurs concerted with C−O bond scission. DFT calculations also suggest a route consistent with these observations involving hydrogen atom addition to the ipso position of the phenyl ring concerted with C−O scission. Hydrogenolysis initiated by H addition in water is more selective (ca. 75 %) than reactions in decalin (ca. 30 %).

Steady-state kinetics of the tungsten containing aldehyde: ferredoxin oxidoreductases from the hyperthermophilic archaeon Pyrococcus furiosus

The tungsten containing Aldehyde:ferredoxin oxidoreductases (AOR) offer interesting opportunities for biocatalytic approaches towards aldehyde oxidation and carboxylic acid reduction. The hyperthermophilic archaeon Pyrococcus furiosus encodes five different AOR family members: glyceraldehyde-3-phosphate oxidoreductase (GAPOR), aldehyde oxidoreductase (AOR), and formaldehyde oxidoreductase (FOR), WOR4 and WOR5. GAPOR functions as a glycolytic enzyme and is highly specific for the substrate glyceraldehyde-3-phosphate (GAP). AOR, FOR and WOR5 have a broad substrate spectrum, and for WOR4 no substrate has been identified to date. As ambiguous kinetic parameters have been reported for different AOR family enzymes the steady state kinetics under different physiologically relevant conditions was explored. The GAPOR substrate GAP was found to degrade at 60 °C by non-enzymatic elimination of the phosphate group to methylglyoxal with a half-life t1/2 = 6.5 min. Methylglyoxal is not a substrate or inhibitor of GAPOR. D-GAP was identified as the only substrate oxidized by GAPOR, and the kinetics of the enzyme was unaffected by the presence of L-GAP, which makes GAPOR the first enantioselective enzyme of the AOR family. The steady-state kinetics of GAPOR showed partial substrate inhibition, which assumes the GAP inhibited form of the enzyme retains some activity. This inhibition was found to be alleviated completely by a 1 M NaCl resulting in increased enzyme activity at high substrate concentrations. GAPOR activity was strongly pH dependent, with the optimum at pH 9. At pH 9, the substrate is a divalent anion and, therefore, positively charged amino acid residues are likely to be involved in the binding of the substrate. FOR exhibited a significant primary kinetic isotope effect of the apparent Vmax for the deuterated substrate, formaldehyde-d2, which shows that the rate-determining step involves a CH bond break from the aldehyde. The implications of these results for the reaction mechanism of tungsten-containing AORs, are discussed.

Ultrafast Oxidation of a Tyrosine by Proton-Coupled Electron Transfer Promotes Light Activation of an Animal-like Cryptochrome.

The animal-like cryptochrome of Chlamydomonas reinhardtii (CraCRY) is a recently discovered photoreceptor that controls the transcriptional profile and sexual life cycle of this alga by both blue and red light. CraCRY has the uncommon feature of efficient formation and longevity of the semireduced neutral form of its FAD cofactor upon blue light illumination. Tyrosine Y373 plays a crucial role by elongating , as fourth member, the electron transfer (ET) chain found in most other cryptochromes and DNA photolyases, which comprises a conserved tryptophan triad. Here, we report the full mechanism of light-induced FADH• formation in CraCRY using transient absorption spectroscopy from hundreds of femtoseconds to seconds. Electron transfer starts from ultrafast reduction of excited FAD to FAD•- by the proximal tryptophan (0.4 ps) and is followed by delocalized migration of the produced WH•+ radical along the tryptophan triad (∼4 and ∼50 ps). Oxidation of Y373 by coupled ET to WH•+ and deprotonation then proceeds in ∼800 ps, without any significant kinetic isotope effect, nor a pH effect between pH 6.5 and 9.0. The FAD•-/Y373• pair is formed with high quantum yield (∼60%); its intrinsic decay by recombination is slow (∼50 ms), favoring reduction of Y373• by extrinsic agents and protonation of FAD•- to form the long-lived, red-light absorbing FADH• species. Possible mechanisms of tyrosine oxidation by ultrafast proton-coupled ET in CraCRY, a process about 40 times faster than the archetypal tyrosine-Z oxidation in photosystem II, are discussed in detail.

Interactions of Atomic and Molecular Hydrogen with a Diamond-like Carbon Surface: H2 Formation and Desorption

Abstract The interactions of atomic and molecular hydrogen with bare interstellar dust grain surfaces are important for understanding H2 formation at relatively high temperatures (&gt;20 K). We investigate the diffusion of physisorbed H atoms and the desorption energetics of H2 molecules on an amorphous diamond-like carbon (DLC) surface. From temperature-programmed desorption experiments with a resonance-enhanced multiphoton ionization (REMPI) method for H2 detection, the H2 coverage-dependent activation energies for H2 desorption are determined. The activation energies decrease with increasing H2 coverage and are centered at 30 meV with a narrow distribution. Using a combination of photostimulated desorption and REMPI methods, the time variations of the surface number density of H2 following atomic and molecular hydrogen depositions are studied. From these measurements, we show that H2 formation on a DLC surface is quite efficient, even at 20 K. A significant kinetic isotope effect for H2 and D2 recombination reactions suggests that H-atom diffusion on a DLC surface is mediated by quantum mechanical tunneling. In astrophysically relevant conditions, H2 recombination due to physisorbed H-atoms is unlikely to occur at 20 K, suggesting that chemisorbed H atoms might play a role in H2 formation at relatively high temperatures.

A rapid MS/MS method to assess the deuterium kinetic isotope effect and associated improvement in the metabolic stability of deuterated biological and pharmacological molecules as applied to an imaging agent

The deuterium kinetic isotope effect has been known for a period of 40 years, but it is only relatively recently that new drug entities (NDEs) incorporating deuterium demonstrating beneficial pharmacokinetics, pharmacodynamics, and toxicology have arrived to market. Determination of the precise location to deuterate and subsequently any evaluation for a kinetic isotope effect (KIE) is challenging. Typically, such an evaluation would be performed in an in vitro metabolic assay (e.g. liver microsomes) in separate reaction media for both the deuterated and non-deuterated analogues. Here, we have devised an approach whereby we incubate a 1:1 ratio of both the deuterated and protio-form of an imaging agent together in the same liver microsomal assay and determine the relative rate of consumption of both moieties, based upon specific MS-MS transitions unique to both molecules without the need for liquid chromatography-mass spectrometry (LC-MS) separation and quantification. Any deviation of the ratio of the MS transitions from the initial starting point indicated an observable KIE.A site specific deuteration of PBR111, a neuroinflammation imaging agent, was chosen for a proof-of-concept study. Based upon prior mechanistic knowledge of PBR111, two locations were selected for deuteration; an active and inactive site, to corroborate that there was no significant KIE for the inactive site and confirm the efficacy of the developed methodology.

Real-Space Observation of Quantum Tunneling by a Carbon Atom: Flipping Reaction of Formaldehyde on Cu(110).

We present a direct observation of carbon-atom tunneling in the flipping reaction of formaldehyde between its two mirror-reflected states on a Cu(110) surface using low-temperature scanning tunneling microscopy (STM). The flipping reaction was monitored in real time, and the reaction rate was found to be temperature independent below 10 K. This indicates that this reaction is governed by quantum mechanical tunneling, albeit involving a substantial motion of the carbon atom (∼1 Å). In addition, deuteration of the formaldehyde molecule resulted in a significant kinetic isotope effect (RCH2O/RCD2O ≈ 10). The adsorption structure, reaction pathway, and tunneling probability were examined by density functional theory calculations, which corroborate the experimental observations.

Quantifying carbon isotope disequilibrium during in-cave evolution of drip water along discreet flow paths

Paleoclimate reconstructions that use speleothem proxy data have increased our understanding of terrestrial climate change, but gaps remain in our understanding of in-cave processes that influence speleothem chemistry. The δ13C values of speleothem calcite are typically influenced by kinetic isotope effects that operate during CO2 degassing and calcite precipitation. Therefore the identification and quantification of these isotopic effects is important in interpreting speleothem stable isotope records. Here we studied the change in water chemistry and δ13C values of dissolved inorganic carbon (DIC) along discreet flow paths at multiple drip sites in Inner Space Cavern, central Texas. We quantified the extent to which the water remains in C isotopic equilibrium during flow along speleothem surfaces as CO2 degasses and calcite precipitates.Two locations in the study cave that have long in-cave flow paths were examined to determine the geochemical evolution and its driving processes along these paths. At each location cave water was sampled at two points 1–2 meters apart along each flow path. Among the key spatial changes observed is a <∼1‰ to ∼4‰ increase in δ13C values of DIC along the flow paths. The magnitude of the increase in δ13C values is controlled by the extent of DIC loss to CO2 degassing. The extent of DIC loss and CO2 degassing is controlled by the pCO2 gradient between drip water and cave air. If the DIC loss is less than 15%, then the evolution of the δ13C value of the DIC reservoir can be accounted for by a Rayleigh distillation model with equilibrium C-isotope fractionation factors for (CO2(g)-HCO3−(aq)) and (CaCO3-HCO3−(aq)). As the depletion of the DIC reservoir exceeds 15% the DIC δ13C values become progressively higher such that the (HCO3−(aq)-CO2(g)) fractionation values needed to explain the observations change from equilibrium values of ∼8‰ to non-equilibrium values of up to ∼25‰. This variance in magnitude of C-isotope fractionation during CO2 degassing cannot be attributed to changes in temperature, and thus we infer significant kinetic isotope effects at higher rates of DIC loss. Such kinetic effects have significant implications for speleothem C-isotope proxy interpretations, as these kinetic isotope effects are of a similar magnitude as those used to infer past changes in drought and vegetation.

Mineralogical, nanostructural, and Ca isotopic evidence for non-classical calcium phosphate mineralization at circum-neutral pH

Growth pathways of calcium (Ca) phosphate minerals are still under debate, but non-classical growth pathways, which encompass any mode of growth involving attachment of primary particles instead of monomer ions, are currently thought to dominate over classical mechanisms under a wide range of growth conditions. Cation desolvation during ion-by-ion growth is associated with the preferential uptake of isotopically light Ca in Ca-bearing phases, so the Ca isotope composition of Ca-bearing minerals can help to elucidate the dominant growth mechanism. Here, we combine stable Ca isotope analysis with mineralogical characterization and nanoscale imaging of growth features to determine for the first time the rate-dependent Ca isotope fractionation during seeded growth of hydroxyapatite (HAP) involving an octacalcium phosphate (OCP) precursor. Our data reveal that growth rates are strongly attenuated by pH, and that Ca isotope fractionation between the solid and growth solution is independent of growth rate between 1.9 × 10−9 and 2.8 × 10−8 mol Ca m−2 s−1. Moreover, nanoscale images of surface topography reveal direct deposition of primary particles on the HAP seed surface following sustained growth, providing visual evidence of a non-classical growth pathway. Together, these findings support the hypothesis that hydroxyapatite growth is dominantly non-classical. The process of cluster nucleation from the bulk solution and attachment of these clusters to the seeded HAP apparently does not involve a significant kinetic isotope effect, which implies that abiogenically formed Ca-phosphates likely preserve the Ca isotope composition of the fluid from which the crystals originated.

Electrocatalytic Water Oxidation by an Unsymmetrical Di-Copper Complex.

An unsymmetrical di-copper complex, ([Cu2(TPMAN)(μ-OH)(H2O)]3+, was prepared and used for electrocatalytic water oxidation in neutral conditions. This complex is a stable and efficient homogeneous catalyst during the electrocatalytic oxygen evolution process ( kcat = 0.78 s-1) with 780 mV onset overpotential in 0.1 M phosphate buffer (pH 7.0). The water oxidation mechanism of the unsymmetrical catalyst [Cu2(TPMAN)(μ-OH)]3+ exhibits different behaviors than that of [Cu2(BPMAN)(μ-OH)]3+, such as two redox steps with different pH dependences, a significant kinetic isotope effect, and buffer concentration dependence. All these changes were ascribed to the open site on the Cu center that is formed by removal of the hemilabile pyridyl site, which acts as an intramolecular proton acceptor to assist the O-O bond formation step.