Signals Of Different Frequencies Research Articles

Development of flexible multi-phase barium titanate piezoelectric sensor for physiological health and action behavior monitoring

Self-powered wearable piezoelectric sensing devices demand flexibility and high voltage electrical properties to meet personalized health and safety management needs. Aiming at the characteristics of piezoceramics with high piezoelectricity and low flexibility, this study designs a high-performance piezoelectric sensor based on multi-phase barium titanate (BTO) flexible piezoceramic film, namely multi-phase BTO sensor. The substrate-less self-supported multi-phase BTO films had excellent flexibility and could be bent 180° at a thickness of 33 μm, and exhibited good bending fatigue resistance in 1 × 10 4 bending cycles at a thickness of 5 μm. The prepared multi-phase BTO sensor could maintain good piezoelectric stability after 1.2 × 10 4 piezoelectric cycle tests. Based on the flexibility, high piezoelectricity, wearability, portability and battery-free self-powered characteristics of this sensor, the developed smart mask could monitor the respiratory signals of different frequencies and amplitudes in real time. In addition, by mounting the sensor on the hand or shoulder, different gestures and arm movements could also be detected. In summary, the multi-phase BTO sensor developed in this paper is expected to develop convenient and efficient wearable sensing devices for physiological health and behavioral activity monitoring applications.

Virtual Sound Image Reconstruction Method for Multi-objective Optimization of Folk Music Based on Evolutionary Algorithm

At present, the exchanges in various fields such as culture, economy, and politics are becoming more and more close in the world. From the perspective of the relationship between national music and cultural development, the development of national music has also received more and more attention, and it has become an inevitable trend in the development of today's era. The purpose of this paper was to perform virtual reconstruction of the sound image of folk music through multiple objective optimizations, and to model the virtual sound image of folk music as a multi-objective optimization problem. According to the research on sound image positioning, the relevant noise factors were removed, so as to achieve the playback of ethnic music that enhanced the surround effect and visual enjoyment. The evolutionary algorithm in this paper was mainly based on the multi-objective optimized sound image localization technology. For the music virtual sound image, an improved FCM algorithm and an evolutionary multi-objective optimization algorithm combining local and non-local information of the sound image were proposed, respectively. Through the analysis of the traditional sound image algorithm method, the accuracy of the sound image localization on the horizontal plane could be effectively improved. After the conversion, the audience could feel the better stereo image and surround feeling of the folk music. Through experimental analysis, it can be seen that the system can not only perform virtual conversion of audio-visual signals of different frequencies, but also provide data for different audio playback systems. The feature point registration error is low, and the reconstruction effect is good, especially the random delay processing in the range of 0∼20m, and the performance is better than the traditional method. Finally, virtual left and right surround sound image signals were obtained, which effectively improved the three-dimensional surround feeling of folk music.

Application of adaptive inverse compensation feedforward—MPC feedback control to AFM piezoelectric micro-positioning platform

As the integral constituent of atomic force microscope (AFM), piezoelectric micro-positioning platform (PMP) plays an pivotal role in AFM working accuracy. However, the PMP platform has hysteretic nonlinear characteristics, which bring challenges to high-precision positioning applications, especially in large travel applications. In this paper, the nonlinear Prandtl–Ishlinskii (P–I) model and the linear auto-regressive with extra inputs dynamic model are cascaded to form the Hammerstein model to characterize the dynamic characteristics of PMP, and the mixed algorithm of the beetle antennae search-differential evolution is designed to identify the parameters of the established model. In order to eliminate the hysteresis effect, a compound controller based on adaptive inverse compensation is proposed, which is composed of feedforward controller of P–I inverse model and model prediction controller feedback controller. As the compound controller depends on modeling accuracy, the tracking error caused by model mismatch is improved by adaptive mechanism. The experimental tracking results of sinusoidal signals and triangular signals of different frequencies show that the proposed method can improve the tracking performance of PMP and verify its effectiveness.

Dual-doppler signal mixing laser doppler velocimeter

In order to reduce the requirement of system bandwidth of Laser Doppler Velocimeter (LDV), a Dual-Doppler signal mixing LDV is proposed in this paper. By transmitting two beams to the moving surface, two Doppler signals are acquired and subsequently mixed to obtain a difference frequency signal. The measured speed can be calculated based on the frequency of this difference frequency signal. This novel structure significantly reduces the bandwidth requirements on the system, which can be further diminished by minimizing the angle between the two beams of the emitted light. Moreover, it exhibits enhanced robustness against variations in launch angle and enables defocusing measurements.

Beyond Homophily and Homogeneity Assumption: Relation-Based Frequency Adaptive Graph Neural Networks.

Graph neural networks (GNNs) have been playing important roles in various graph-related tasks. However, most existing GNNs are based on the assumption of homophily, so they cannot be directly generalized to heterophily settings where connected nodes may have different features and class labels. Moreover, real-world graphs often arise from highly entangled latent factors, but the existing GNNs tend to ignore this and simply denote the heterogeneous relations between nodes as binary-valued homogeneous edges. In this article, we propose a novel relation-based frequency adaptive GNN (RFA-GNN) to handle both heterophily and heterogeneity in a unified framework. RFA-GNN first decomposes an input graph into multiple relation graphs, each representing a latent relation. More importantly, we provide detailed theoretical analysis from the perspective of spectral signal processing. Based on this, we propose a relation-based frequency adaptive mechanism that adaptively picks up signals of different frequencies in each corresponding relation space in the message-passing process. Extensive experiments on synthetic and real-world datasets show qualitatively and quantitatively that RFA-GNN yields truly encouraging results for both the heterophily and heterogeneity settings. Codes are publicly available at: https://github.com/LirongWu/RFA-GNN.

Fault Analysis of Microgrid With Grid-Connected and Islanded mode Using IoT-Wavelet Approach

Now a days microgrid is one of the most widely used method in power network to reduce system losses as well as improve the reliability in the field of electrical systems. Integration of power projects typically involves adding new distributed energy sources with and without compensating devices to an existing power system network. It is essential to design new protection scheme due to changes in the topology and dynamic behavior of the system. Now fast fault detection algorithmic approaches are necessary to integrate different types of generating sources and loads under smart environment. The protection scheme must provide physical monitoring as well as parametrical with the help of new technologies. Internet-of-things(IoT) is one of the source to monitor electrical systems under various environmental conditions of the system. Wavelet (WT) basically investigates the fault transient signals of different frequency and divides the waveform into different approximate and detailed coefficient values, which provides the important knowledge about the classification and location of fault. The detection of faulty-line and the location of fault by implementation wavelet detailed coefficients of Bior1.5 mother wavelet. This proposed method provides fault analysis of IoT based protection of microgrid with Grid-connected and Islanded Mode Using Wavelet Approach under various types of faults.

A New Fault Distance Measurement Scheme for DC Distribution Network

To solve the problem of fault location in the DC distribution network, this paper proposes a new fault distance measurement scheme based on the impedance measurement algorithm against fault transition resistance and the improved Moore voting algorithm. Firstly, signals of different frequencies are injected into the DC circuit in different periods, after the converter is blocked due to the DC side fault. Then, through the distance measurement algorithm against fault transition resistance, several groups of fault distance data are obtained. The improved Moore voting algorithm is used to process these fault distance values so that the accurate fault distance values are determined. Finally, simulation tests verify the reliability and accuracy of the proposed scheme. The proposed scheme requires a low sampling frequency, and it can not be interfered with by the fault transition resistance and occasional large errors. These advantages help to improve the efficiency and accuracy of troubleshooting.

Fading suppression in the Ф-OTDR system based on a phase-modulated optical frequency comb.

In this paper, what we believe to be a novel method is proposed to suppress the fading effect of the phase-sensitive optical time domain reflectometer (Ф-OTDR) by using a phase-modulated optical frequency comb. In the Ф-OTDR system, intensity distributions of Rayleigh backscattering (RBS) light are different for pulsed probe lights with different central frequencies, therefore the locations of the fading points corresponding to signals of different frequencies are differently distributed, allowing the use of frequency division multiplexing to suppress the fading effects. In the experimental system of this paper, a continuous light in the form of a frequency comb is firstly generated through phase modulation. It is then modulated into a pulsed probe light and injected into the sensing fiber to produce different RBS intensity distributions. Finally, the extracted phase is processed by using the amplitude evaluation method, so that the distorted phase can be eliminated. Fading suppression is achieved using our system, and the effect of suppression is evaluated. By using an equal-amplitude optical frequency comb containing seven frequency components, the fading probability density of the system is dramatically reduced from the range of 5.49%-9.83% to 0.08%. Compared with the conventional system using a single acoustic-optic modulator to generate the frequency shift, the method proposed in this paper features a larger modulation bandwidth and more flexible frequency combination scheme to better suppress the fading effect. This method does not sacrifice the response bandwidth of the system, and the phase delay can be precisely controlled, which helps to fully suppress the fading effect.

Research on the mathematical model and design of a three loop controller for the oscillating scanning system of a laser line scanning galvanometer

The scanning vibration mirror system drives the scanning mirror fixed to it through the oscillation of the motor shaft, so as to control the reflected light to form a dynamic variable light path. The vibration mirror scanning system has higher controllability than the fixed optical path system and has been widely used.In this dissertation, after establishing the models of the core components of the scanning vibration mirror system, the mathematical model of the whole system is established.On this basis, simulation and theoretical analysis show that the system has some shortcomings, such as small bandwidth, low dynamic tracking accuracy, and the comprehensive dynamic performance of the system is easily affected by the input of external interference branches. A series correction controller and three closed-loop controller are designed for the above problems, respectively, and the control effects of the two controllers on the scanning vibration mirror system are studied through simulation experiments. By comparing the output response results of the system under the action of sinusoidal signals of different frequencies, it can be seen that the comprehensive effect of the three closed-loop controllers is better. Under the action of step signals, the overshoot of the three closed-loop correction controller correction system is 21.5% higher than that of the series controller correction system, the adjustment time is 82.7% less, and the steady-state error is significantly smaller. Therefore, it indicates that the three closed-loop correction system has good rapidity and steady-state accuracy.

Elastic Wave Mechanics in Damaged Metallic Plates

Human health monitoring (HHM) is essential for continued daily task execution, as is structural health monitoring (SHM) for structures to ensure the continual performance of their designed tasks with optimal efficiency. The existence of damage in a structure affects its optimal use through stiffness deterioration. Damage of different forms could occur in a structure but have the singular objective of material degradation, leading to its underuse for a task. Guided wave ultrasonics has shown strength in detecting sundry damage in structures, but most of the damage monitored and detected is unfilled with substances. However, some damage could trap and accumulate substances that could hasten material degradation through corrosion activities under favorable conditions, especially in the oil and gas industry. This study used the ultrasonic-guided waves’ pitch–catch inspection technique to identify damage filled with different materials. The assessment was based on the RMSD of the dominant Lamb wave mode’s average maximum amplitude and the response signals’ transmission coefficient (TC). A five-cycle tone burst of excitation signals of different frequencies was created to generate propagating Lamb waves in the structure. The fundamental antisymmetric mode was found to be more sensitive than the fundamental symmetric mode when detecting damage filled with various substances. At 80 kHz, the deviation of the current response signals from the baseline response signals due to different filled substances in the damage was distinct and decreased with increased fluid viscosity. Given that structures in the oil and gas sector are particularly susceptible to substance-induced damage, the outcomes of this study are paramount.

Obtaining extended insight into molecular systems by probing multiple pathways in second-order nonlinear spectroscopy.

Second-order nonlinear spectroscopy is becoming an increasingly important technique in the study of interfacial systems owing to its marked ability to study molecular structures and interactions. The properties of such a system under investigation are contained within their intrinsic second-order susceptibilities which are mapped onto the measured nonlinear signals (e.g. sum-frequency generation) through the applied experimental settings. Despite this yielding a plethora of information, many crucial aspects of molecular systems typically remain elusive, for example the depth distributions, molecular orientation and local dielectric properties of its constituent chromophores. Here, it is shown that this information is contained within the phase of the measured signal and, critically, can be extracted through measurement of multiple nonlinear pathways (both the sum-frequency and difference-frequency output signals). Furthermore, it is shown that this novel information can directly be correlated to the characteristic vibrational spectra, enabling a new type of advanced sample characterization and a profound analysis of interfacial molecular structures. The theory underlying the different contributions to the measured phase of distinct nonlinear pathways is derived, after which the presented phase disentanglement methodology is experimentally demonstrated for model systems of self-assembled monolayers on several metallic substrates. The obtained phases of the local fields are compared to the corresponding phases of the nonlinear Fresnel factors calculated through the commonly used theoretical model, the three-layer model. It is found that, despite its rather crude assumptions, the model yields remarkable similarity to the experimentally obtained values, thus providing validation of the model for many sample classes.

Research on Development 3D Ground Penetrating Radar Acquisition and Control Technology for Road Underground Diseases with Dual-Band Antenna Arrays.

This paper describes the development of a new 3D ground-penetrating radar (GPR) acquisition and control technology for road underground diseases with dual-band antenna arrays. The 3D GPR system can be mounted on a vehicle-loading device and used by vehicles to detect road underground diseases at regular speeds. Compared with existing 3D GPR systems, this new type of 3D GPR has the following design features: it has dual-band antenna arrays, including a 16-channel 400 MHz antenna array and an 8-channel 200 MHz antenna array, which not only improves the detection efficiency, but also effectively balances the detection depth and detection resolution. A novel antenna switching method for time division step multiplexing (TDSM) is realized via field programmable gate array (FPGA), which not only avoids the crosstalk of antenna echo signals of different frequencies, but also ensures the interval of the same antenna working time. By combining the advantages of the FPGA and micro-control unit (MCU), and utilizing the high-speed transmission of the network port, the high-speed real-time transmission of the 3D GPR echo data is achieved. Finally, the integration of all software and hardware verified the correctness of the system, with good results.

A comparative evaluation of equivalent circuit and finite element electrical skin modelling techniques

Mathematical models are essential to our understanding of the electrical properties of the skin. In this paper, two types of simulation model, an equivalent circuit and a finite element simulation were investigated and compared to evaluate their accuracy. Impedance spectra were measured, between 100 Hz and 50 MHz, (the limits of the available spectrum analyser) of a pair of electrodes placed on skin and these spectra used to find the parameters of a standard equivalent circuit model. The resulting indicated that the components of the equivalent circuit may represent different parts of the skin physiology that indicated by the literature. A simulation model was constructed in COMSOL, with the dimensions, permittivity and conductivity of each skin layer taken from across the published literature. This model was tested for sensitivity to the thicknesses of tissue layers as well as the shape of the boundary between layers. It was found that changing the layer thicknesses only had a significant effect for the stratum corneum and dermis, and that changing the shape of the boundary between layers created an impedance change of up to two times at certain higher frequencies (>1 kHz). While the impedance curves generated by the two models had the same overall profile, there was a difference of up to 100 times in their DC impedance values. This indicated that the broad understanding of how electrical signals of different frequencies pass through the skin is correct, but that significant insufficiencies exist in the published properties of the skin layers, particularly the stratum corneum and that finding more accurate values for these properties is necessary for the development of better models.

The Multiple Frequency Conversion Sinusoidal Chaotic Neural Network and Its Application

Aiming at the problem that the global search performance of a transiently chaotic neural network is not ideal, a multiple frequency conversion sinusoidal chaotic neural network (MFCSCNN) model is proposed based on the biological mechanism of the brain, including multiple functional modules and sinusoidal signals of different frequencies. In this model, multiple FCS functions and Sigmoid functions with different phase angles were used to construct the excitation function of neurons in the form of weighted sum. In this paper, the inverted bifurcation diagram, Lyapunov exponential diagram and parameter range of the model are given. The dynamic characteristics of the model are analyzed and applied to function optimization and combinatorial optimization problems. Experimental results show that the multiple frequency conversion sinusoidal chaotic neural network has better global search performance than the transient chaotic neural network and other related models.

Design and Optimization of Hydropneumatic Suspension Simulation Test Bench with Electro-Hydraulic Proportional Control

Available hydropneumatic suspension simulation test benches have insufficient loading accuracy and limited functionality rendering them unsuitable for performance testing of heavy vehicles with this type of suspension. Therefore, a multi-functional compound simulation test bench was designed that used an electro-hydraulic proportional control technique. A mathematical model was established to describe the hydraulic loading system, and the transfer function of the system was derived. The gain and phase margins confirmed the stability of the system. A simulation model was established in the Simulink environment and step and sine signals of different frequencies were applied separately to analyze the dynamic characteristics of the system. The results showed that the system responded slowly and exhibited phase lag and signal distortion. The dynamic characteristics of the system were improved by incorporating an adaptive fuzzy PID controller. Simulation results showed that the response of the system to the step signal stabilized at the preset value within 0.3 s with no oscillation or overshoot. The improved system performed well in replicating the random vibrations of heavy vehicles operating on Class B and C roads. This confirmed that the system can satisfy the loading requirements of heavy vehicle hydropneumatic suspensions and can be used as a simulation test bench for such suspensions.

Simple and low-latency multipoint-to-point aggregation architecture using commercial optical transceivers for uplink fronthaul.

The increasing demand of real-time applications poses a huge challenge to building next-generation radio access network (NG-RAN) with higher stability and lower system complexity. Parallel signal detection (PSD), which aggregates signals of different intermediate frequencies (IFs) on different wavelengths with a single photodiode (PD), becomes a promising candidate for uplink mobile fronthaul with the advantage of low-latency. However, high requirements on the transmitters inhibit the large-scale deployment of radio units (RU). In this paper, we propose an economical, low-latency, multipoint-to-point (MP2P) uplink fronthaul architecture capable of aggregating four end-users with commercial 25G-class optical modules and a single PD. With delta-sigma modulation (DSM), commercial off-the-shelf optical modules can replace analog transmitters in traditional systems. As a demonstration, we aggregated 4 × 380.16-MHz 5 G new radio (NR) orthogonal frequency division multiplexing (OFDM) signals in an IF band with a fixed interval of 400 MHz over 20 km fiber with 4 users.

Integrating RF MEMS Switch on Array Antenna to Achieve Reconfigurability in Wideband Application

Reconfigurable multi-band antennas are highly used for commercial as well as military purposes as a single antenna could be reconfigured dynamically to send and the receive multiple signals of different frequency simultaneously. In this work an antenna array is designed and integrated with RF MEMS shunt capacitive switch over it, for the applications of S,C,X-band in the frequency range of 2-12GHz. A membrane that can move freely over a coplanar waveguide serves as the MEMS switch. Here, a double meander tuned dual beam arrangement is used to increase switch isolation. Electrostatic mechanisms are used for actuators due to their low power requirements, compact design, and quick switching. By the simulation result, The beam starts to bend from 0.60793mm to 0.4116mm at the voltage 1.78492mV to 57.7382mV and it provides capacitance at 1.435pF to 1.597nF. It was noticed that the insertion loss (S21) and the return loss (S11) of a MEMS switch are around -0.079 dB and 20.618 dB correspondingly, in order to have a good switching characteristic in the up state. The switch has an insertion loss (S21) of -31.307 dB and return loss (S11) of about -0.256 dB in the up state thus exhibiting good switch characteristics. The RF MEMS shunt capacitive switch is integrated on the predesigned antenna array the dynamically shifting of the switch from on state to off state helps achieving the reconfigurability in the antenna array. Such antennas are applicable in spaceborne radar, communication satellites, unmanned aerial vehicles, unmanned aircraft system and various other communication as well as sensing applications.

New electronic implementation of the timestamps method intended for high resolution comparison of laser wavelengths.

This article describes a new measurement system for the comparison of two electronic signals of different frequencies with application to high resolution comparison of laser wavelengths using a Michelson interferometer. It was built within the framework of research projects made by the University of Vigo and the Laboratorio Oficial de Metroloxía de Galicia (LOMG) in cooperation with Escolas Proval High School. The new hardware is based on a cheap high-speed module for the acquisition of data and a microcontroller module for processing, which can also be used for practical lessons in vocational training. The system has been tested with electronic signal generators. The novel measurement method reduces the uncertainty using multiple consecutive measurements and the fractional part of the fringes and could achieve precisions in the range 10-12 of the wavelength ratios.

Microwave Frequency Dissemination over a 250 km Fiber Link with Stability at the 10−18 Level

In this paper, a microwave phase compensation scheme is adopted. It utilizes microwave signals of different frequencies for round-trip signal transmission over a 250 km fiber optic link to mitigate the impact of parasitic reflections. Additionally, dispersion compensation fibers are employed to compensate for the dispersion in the fiber optic link. Bidirectional optical amplifiers are utilized to compensate for the losses in long-distance fiber optic links and reduce optical path asymmetry. By implementing these methods, the transmission stability of the fiber optic microwave frequency transmission system achieves 5.6 × 10−15 at 1 s and 2.8 × 10−18 at 100,000 s.

Driver Mutations of Pancreatic Cancer Affect Ca2+ Signaling and ATP Production.

Glandular pancreatic epithelia of the acinar or ductal phenotype may seem terminally differentiated, but they are characterized by remarkable cell plasticity. Stress-induced trans-differentiation of these cells has been implicated in the mechanisms of carcinogenesis. Current consensus links pancreatic ductal adenocarcinoma with onco-transformation of ductal epithelia, but under the presence of driver mutations in Kras and Trp53, also with trans-differentiation of pancreatic acini. However, we do not know when, in the course of cancer progression, physiological functions are lost by mutant acinar cells, nor can we assess their capacity for the production of pancreatic juice components. Here, we investigated whether two mutations-KrasG12D and Trp53R172H-present simultaneously in acinar cells of KPC mice (model of oncogenesis) influence cytosolic Ca2+ signals. Since Ca2+ signals control the cellular handling of digestive hydrolases, any changes that affect intracellular signaling events and cell bioenergetics might have an impact on the physiology of the pancreas. Our results showed that physiological doses of acetylcholine evoked less regular Ca2+ oscillations in KPC acinar cells compared to the control, whereas responses to supramaximal concentrations were markedly reduced. Menadione elicited Ca2+ signals of different frequencies in KPC cells compared to control cells. Finally, Ca2+ extrusion rates were significantly inhibited in KPC cells, likely due to the lower basal respiration and ATP production. Cumulatively, these findings suggest that driver mutations affect the signaling capacity of pancreatic acinar cells even before the changes in the epithelial cell morphology become apparent.