Signal-to-clutter Ratio Research Articles

ILN-SSR: Improved Logarithmic Norm and Sparse Structure Refinement for Infrared Small Target Detection

The effective discrimination of targets from backgrounds in environments characterized by a low signal-to-clutter ratio (SCR) is paramount for the advancement of infrared small target detection (IRSTD). In this work, we propose a novel detection framework predicated on low-rank sparse decomposition (LRSD), incorporating an improved logarithmic norm and a mechanism for sparse structure refinement, herein referred to as the improved logarithmic norm and sparse structure refinement (ILN-SSR). The ILN-SSR framework more precisely characterizes the sparse properties of both the background and the target, enabling a more effective distinction between the target and its background. Initially, our approach entails the utilization of an improved logarithmic norm to precisely estimate the low-rank attributes of the infrared image background. This is followed by the employment of a linear sparse regularization term alongside a target-traits-based sparse regularization term aimed at meticulously identifying targets within sparse regions and refining the sparse structure. Subsequently, we combine these components into the ILN-SSR framework, which formulates IRSTD as an optimization problem. The resolution of this framework is achieved through the implementation of the alternating direction method of multipliers (ADMM). The efficacy of the proposed framework is corroborated through the analysis of six image sequences. Comprehensive experimental assessments affirmed the framework’s substantial robustness in navigating various complex backgrounds.

A Novel Detection Transformer Framework for Ship Detection in Synthetic Aperture Radar Imagery Using Advanced Feature Fusion and Polarimetric Techniques

Ship detection in synthetic aperture radar (SAR) imagery faces significant challenges due to the limitations of traditional methods, such as convolutional neural network (CNN) and anchor-based matching approaches, which struggle with accurately detecting smaller targets as well as adapting to varying environmental conditions. These methods, relying on either intensity values or single-target characteristics, often fail to enhance the signal-to-clutter ratio (SCR) and are prone to false detections due to environmental factors. To address these issues, a novel framework is introduced that leverages the detection transformer (DETR) model along with advanced feature fusion techniques to enhance ship detection. This feature enhancement DETR (FEDETR) module manages clutter and improves feature extraction through preprocessing techniques such as filtering, denoising, and applying maximum and median pooling with various kernel sizes. Furthermore, it combines metrics like the line spread function (LSF), peak signal-to-noise ratio (PSNR), and F1 score to predict optimal pooling configurations and thus enhance edge sharpness, image fidelity, and detection accuracy. Complementing this, the weighted feature fusion (WFF) module integrates polarimetric SAR (PolSAR) methods such as Pauli decomposition, coherence matrix analysis, and feature volume and helix scattering (Fvh) components decomposition, along with FEDETR attention maps, to provide detailed radar scattering insights that enhance ship response characterization. Finally, by integrating wave polarization properties, the ability to distinguish and characterize targets is augmented, thereby improving SCR and facilitating the detection of weakly scattered targets in SAR imagery. Overall, this new framework significantly boosts DETR’s performance, offering a robust solution for maritime surveillance and security.

Imaging performance prediction of a hypersonic target in a geosynchronous orbit based on multi-dimensional information correlation of radiation, multi-spectral, and polarization

Hypersonic target detection based on infrared intensity characteristics is easily disturbed by sea surface and cloud flares when detected by space-based optical systems, which results in a low detection rate, high false alarm, and difficulty in stable detection. This paper explores a method to improve target detection performance based on the correlation of infrared radiation, multi-spectral and polarization. Firstly, the comprehensive factors that influence complex ambient illumination, atmospheric transmission, and clutter background on spectral-polarization characteristics of hypersonic targets are analyzed. Based on the global radiation scattering theory, the temperature distribution model of the hypersonic target is established by using FLUENT. The polarization emission and pBRDF model of the target is established, and the radiation polarization transfer model is generated. Secondly, the sea surface temperature distribution is obtained by inversion of Landsat8 remote sensing data. The radiation polarization transfer model of the sea surface is established based on the Cox-Munk model combined with pBRDF and the polarization emission model. Thirdly, the polarization scattering effect of atmospheric particles on the upward radiation of the interaction of the target with the sunlight is considered comprehensively, and the 6SV radiative transfer model is used to calculate the polarization effect of atmospheric particles on the upward radiation transmission of the target and the background. Then, combined with the point diffusion of the optical system and the photoelectric conversion of the detector, the multi-dimensional full-chain imaging prediction model of the hypersonic target-sea background-ambient atmosphere-optical system-detector is established. The imaging characteristics and detection performance of the target in different imaging dimensions are simulated and analyzed with the signal-to-clutter ratio (SCR). The research shows that in the direction of reflected sunlight from the sea surface, the sea surface glare is suppressed and the target is highlighted through a target detection method of multi-dimensional information. This method has better detection results than the infrared multi-spectral detection method.

An Advanced Quality Assessment and Monitoring of ESA Sentinel-1 SAR Products via the CyCLOPS Infrastructure in the Southeastern Mediterranean Region

The Cyprus Continuously Operating Natural Hazards Monitoring and Prevention System, abbreviated CyCLOPS, is a national strategic research infrastructure devoted to systematically studying geohazards in Cyprus and the Eastern Mediterranean, Middle East, and North Africa (EMMENA) region. Amongst others, CyCLOPS comprises six permanent sites, each housing a Tier-1 GNSS reference station co-located with two calibration-grade corner reflectors (CRs). The latter are strategically positioned to account for both the ascending and descending tracks of SAR satellite missions, including the ESA’s Sentinel-1. As of June 2021, CyCLOPS has reached full operational capacity and plays a crucial role in monitoring the geodynamic regime within the southeastern Mediterranean area. Additionally, it actively tracks landslides occurring in the western part of Cyprus. Although CyCLOPS primarily concentrates on geohazard monitoring, its infrastructure is also configured to facilitate the radiometric calibration and geometric validation of Synthetic Aperture Radar (SAR) imagery. Consequently, this study evaluates the performance of Sentinel-1A SAR by exploiting the CyCLOPS network to determine key parameters including spatial resolution, sidelobe levels, Radar Cross-Section (RCS), Signal-to-Clutter Ratio (SCR), phase stability, and localization accuracy, through Point Target Analysis (PTA). The findings reveal the effectiveness of the CyCLOPS infrastructure to maintain high-quality radiometric parameters in SAR imagery, with consistent spatial resolution, controlled sidelobe levels, and reliable RCS and SCR values that closely adhere to theoretical expectations. With over two years of operational data, these findings enhance the understanding of Sentinel-1 SAR product quality and affirm CyCLOPS infrastructure’s reliability.

A Clutter Removal Method Based on the F-K Domain for Ground-Penetrating Radar in Complex Scenarios

Ground-penetrating radar (GPR) is a classic geophysical exploration method that utilizes the emission and reception of electromagnetic waves to non-destructively detect target objects in the target medium. It has been widely applied in various fields such as pipeline detection, cavity detection, and rebar detection. However, GPR systems are susceptible to environmental clutter interference, which poses challenges for data interpretation and subsequent processing. In this paper, the separability of clutter and target signal in the frequency-wavenumber (F-K) domain is validated through modeling, leading to the proposal of a comprehensive clutter removal method based on the F-K domain for complex scenarios. The direct coupling wave is initially eliminated by applying a peak matching mean subtraction filter, which avoids the artifacts. Subsequently, the F-K domain transformation is performed and surface clutter undulations are effectively removed using a method based on singular value decomposition and k-means clustering. Finally, an angle filter with Gaussian tapering at the edges is designed based on physical models to efficiently eliminate linear interference without undesired ringing interference. The commonly used clutter removal algorithms, including mean subtraction (MS), singular value decomposition (SVD), robust principal component analysis (RPCA), and traditional F-K filtering methods, are compared with the proposed algorithm on both the numerical simulated data and actual GPR data. The results from visual and quantitative analysis confirm that our proposed method is more effective than current commonly used clutter suppression algorithms. We have successfully enhanced the Signal-to-Clutter Ratio (SCR) of the GPR data, resulting in an Improvement Factor (IF) of 30.63 dB, 23.59 dB, and 30.60 dB for simulated data, experimental data, and TU1208 public data, respectively. The detection capability of buried targets is enhanced, thereby establishing a solid foundation for subsequent data interpretation and target identification.

Use of a Residual Neural Network to Demonstrate Feasibility of Ship Detection Based on Synthetic Aperture Radar Raw Data

Synthetic Aperture Radar (SAR) is a well-established 2D imaging technique employed as a consolidated practice in several oil spill monitoring services. In this scenario, onboard detection undoubtedly represents an interesting solution to reduce the latency of these services, also enabling transmission to the ground segment of alert signals with a notable reduction in the required downlink bandwidth. However, the reduced computational capabilities available onboard require alternative approaches with respect to the standard processing flows. In this work, we propose a feasibility study of oil spill detection applied directly to raw data, which is a solution not sufficiently addressed in the literature that has the advantage of not requiring the execution of the focusing step. The study is concentrated only on the accuracy of detection, while computational cost analysis is not within the scope of this work. More specifically, we propose a complete framework based on the use of a Residual Neural Network (ResNet), including a simple and automatic simulation method for generating the training data set. The final tests with ERS real data demonstrate the feasibility of the proposed approach showing that the trained ResNet correctly detects ships with a Signal-to-Clutter Ratio (SCR) > 10.3 dB.

Implementation of Digital Signal Processor for Pulse Doppler Radar

This paper presents the design and implementation of a digital signal processor (DSP) board, utilizing a TMS320C50 family DSP chip, for pulse-Doppler radar systems. Pulse-Doppler radar systems often encounter challenges such as strong clutter, noise, and jamming in dealing with echoes. To overcome these challenges, advanced digital signal processing techniques are employed. The main objective of this paper is to introduce a cost-effective signal processing solution that significantly enhances the performance of the radar system and brings it up to speed with modern radar technologies. The hardware described in this work can also be effectively utilized for implementing various types of signal processing algorithms. Additionally, as a secondary objective, the paper presents the digital realization of a radar detector. Traditionally, this detector was constructed using an analog Doppler filter bank. However, in this work, it is digitally implemented using N digital filters in place of the analog bank. By utilizing the designed DSP board and implementing the radar detector digitally, this paper demonstrates the potential for improved performance and efficiency in pulse-Doppler radar systems. The advancements made in this work contribute to the development of cost-effective and technologically advanced radar systems. The research results are presented for four different wind conditions, showcasing the effectiveness of the proposed approach. Furthermore, the paper suggests an algorithm that combines parametric and non-parametric techniques and provides a detailed explanation of its implementation. Finally, using the non-parametric technique, the probability of detection curves (PD) are simulated with respect to the signal-to-clutter ratio (SCR) for each wind condition, and the simulation results are depicted and compared. The achievements of this paper include the proposal of an efficient approach for clutter suppression in ground surveillance pulse Doppler radar, the comparison of different clutter suppression algorithms, and the development of an algorithm that combines parametric and non-parametric techniques. The simulation results provide valuable insights into the performance of the proposed algorithms under different wind conditions.

Sea clutter radar target detector based on autoregressive sieve bootstrap

The autoregressive sieve (ARS) bootstrap method can capture the correlation of time series and expand the original data set to the required volume. In this study, we introduce the ARS bootstrap into the matrix constant false alarm rate (CFAR) method to counter the inability of the Monte Carlo methods to extract the detection threshold due to the limited number of pulses under a certain false alarm probability. We assume the echo data of each range cell in a coherent processing interval (CPI) to be a stationary time series, and regard target detection as a two-sample hypothesis testing problem. We propose a statistic to test the equivalence of the autocovariance corresponding to two potential time series by using the correlation between pulses in a short pulse dataset, and analyze the validity of the ARS bootstrap for this statistic. The statistic distribution is obtained according to the bootstrap procedure and the threshold is obtained under fixed false alarm probabilities. Numerical experiments on the simulated and real sea clutter data were conducted to compare the detection results of the partial matrix CFAR detectors for the short and long pulse cases. With the introduction of the bootstrap method, we do not need to model the clutter amplitude distribution and the related statistical characteristics during target detection. To improve the detection probability with low signal-to-clutter ratio (SCR), we propose the two-sample autocovariance vector (ACV) detector based on the proposed statistic and use the correlation properties between pulses. We observed a 28% increase in detection probability when the SCR was 0 dB compared to other matrix CFAR methods, such as detectors based on Logarithmic Euclidean (LE) distance, Kernel Function-based Symmetric Kullback-Leibler (KSKL) divergence, and Total Bregman divergence (TBD) for the short pulse case.

Ultra‐wideband microwave imaging for breast tumor screening using step recovery diode‐based pulse generator

SummaryThe feasibility of a multistatic imaging system built on step recovery diode (SRD)‐based pulse generator for microwave breast cancer detection is investigated to develop a low‐cost and portable non‐invasive screening device in the future. The system consists of a pulse generator, an antenna array, and a sampling oscilloscope, in which the pulse generator generates monocycle pulse with a frequency bandwidth from 510 MHz to 6.1 GHz. Experiments are performed on a breast phantom made up of a breast model using 3D printing technology and soybean oil as internal filler, without the usage of any coupling medium. Four identical omnidirectional antennas sequentially transmit ultra‐wideband (UWB) signal and collect signals scattered inside the breast phantom, and then, the interior image of the phantom is reconstructed by background subtraction method and delay and sum (DAS) imaging algorithm. The system can successfully detect and distinguish a variety of test scenarios including cancerous breast phantom containing target with different size and different depth made by iron ball and bacon and healthy breast phantom. The smallest detectable target is 3 mm bacon, with signal to clutter ratio (SCR) and signal to mean ratio (SMR) metrics of 1.63 and 7.79 dB, respectively, and positioning error and relative error of 2.2 mm and 1.7%, respectively. It proves that the proposed time‐domain imaging system is promising for scaling up the detection range of early breast cancer.

Sea clutter suppression algorithm in low SCR based on improved fractional Fourier transform

Sea clutter suppression and target detection under complex sea states in low signal-to-clutter ratio (SCR) is the key of current maritime detection research. The target extraction ability of most algorithms is mostly based on accurate modeling of sea clutter, but sea clutter is complex and unstable, which is difficult to accurately model, especially in poor sea states. According to the characteristics of the target echo signal, this paper introduces intrinsic time-scale decomposition (ITD) to preprocess the echo signal to improve the algorithm effect under low SCR. Secondly, the too much cycles in searching for optimal transformation in fractional Fourier transform (FRFT) is improved to reduce the calculation cost and extract the target signal accurately. The effectiveness and reliability of the proposed method are verified by simulation and measured experiments under different SCR and different transform order interval Δp, and the sea clutter suppression ability and target extraction accuracy are measured by parameters such as the detection rate, the gain of SCR and the running time. Compared with FRFT-related algorithms, the results indicates that the proposed algorithm can effectively suppress sea clutter and accurately extract target signal even at SCR = −25 dB in less than half the running time of the comparison algorithms.

An Adaptive Infrared Small-Target-Detection Fusion Algorithm Based on Multiscale Local Gradient Contrast for Remote Sensing.

Space vehicles such as missiles and aircraft have relatively long tracking distances. Infrared (IR) detectors are used for small target detection. The target presents point target characteristics, which lack contour, shape, and texture information. The high-brightness cloud edge and high noise have an impact on the detection of small targets because of the complex background of the sky and ground environment. Traditional template-based filtering and local contrast-based methods do not distinguish between different complex background environments, and their strategy is to unify small-target template detection or to use absolute contrast differences; so, it is easy to have a high false alarm rate. It is necessary to study the detection and tracking methods in complex backgrounds and low signal-to-clutter ratios (SCRs). We use the complexity difference as a prior condition for detection in the background of thick clouds and ground highlight buildings. Then, we use the spatial domain filtering and improved local contrast joint algorithm to obtain a significant area. We also provide a new definition of gradient uniformity through the improvement of the local gradient method, which could further enhance the target contrast. It is important to distinguish between small targets, highlighted background edges, and noise. Furthermore, the method can be used for parallel computing. Compared with the traditional space filtering algorithm or local contrast algorithm, the flexible fusion strategy can achieve the rapid detection of small targets with a higher signal-to-clutter ratio gain (SCRG) and background suppression factor (BSF).

APO-ELM Model for Improving Azimuth Correction of Shipborne HFSWR

Shipborne high-frequency surface wave radar (HFSWR) has a wide range of applications and plays an important role in moving target detection and tracking. However, the complexity of the sea detection environment causes the target signals received by shipborne HFSWR to be seriously disturbed by sea clutter. Sea clutter increases the difficulty of azimuth estimation, resulting in a challenging problem for shipborne HFSWR. To solve this problem, a novel azimuth correction method based on adaptive boosting error feedback dynamic weighted particle swarm optimization extreme learning machine (APO-ELM) is proposed to improve the azimuth estimation accuracy of shipborne HFSWR. First, the sea clutter is modeled and simulated. Then, we study its characteristics and analyze the influence of its characteristics on the first-order clutter spectrum and target detection accuracy, respectively. In addition, the proposed improved particle swarm optimization (PSO) and adaptive neuron clipping algorithm are used to optimize the input parameters of the ELM network. Then, the network performs error feedback based on the optimized parameter performance and updates the feature matrix, which can give a minimum clutter-error estimation. After that, it iteratively trains multiple weak learners using the adaptive boosting (AdaBoost) algorithm to form a strong learner and make strong predictions. Finally, after error compensation, the best azimuth estimation results are obtained. The sample sets used for the APO-ELM network are obtained from field shipborne HFSWR data. The network training and testing features include the wind direction, sea current, wind speed, platform speed, and signal-to-clutter ratio (SCR). The experimental results show that this method has a lower root-mean-square error than the back-propagation neural network and support vector regression (SVR) azimuth correction methods, which verifies the effectiveness of the proposed method.

A novel sea clutter suppression method based on SVD‐FRFT at low signal‐to‐clutter ratio

AbstractThe target and sea clutter Doppler domains frequently overlap due to the frequent passage of slow ship targets through the sea clutter zone. In this letter, a novel sea clutter suppression method is suggested as a solution to this issue, whose key is a novel singular value zeroing criterion guided by the search results of two‐dimensional spectral peaks. Verified by simulations, the method proposed can improve signal‐to‐clutter ratio (SCR) from −8 to 41 dB in the frequency domain and be more effective than the conventional SVD‐FRFT (a method for joint application of singular value decomposition and fractional Fourier transformer) and improved SVD‐FRFT.

Application of Spectral Algorithm Applied to Spatially Registered Bi-Parametric MRI to Predict Prostate Tumor Aggressiveness: A Pilot Study

Background: Current prostate cancer evaluation can be inaccurate and burdensome. Quantitative evaluation of Magnetic Resonance Imaging (MRI) sequences non-invasively helps prostate tumor assessment. However, including Dynamic Contrast Enhancement (DCE) in the examined MRI sequence set can add complications, inducing possible side effects from the IV placement or injected contrast material and prolonging scanning time. More accurate quantitative MRI without DCE and artificial intelligence approaches are needed. Purpose: Predict the risk of developing Clinically Significant (Insignificant) prostate cancer CsPCa (CiPCa) and correlate with the International Society of Urologic Pathology (ISUP) grade using processed Signal to Clutter Ratio (SCR) derived from spatially registered bi-parametric MRI (SRBP-MRI) and thereby enhance non-invasive management of prostate cancer. Methods: This pilot study retrospectively analyzed 42 consecutive prostate cancer patients from the PI-CAI data collection. BP-MRI (Apparent Diffusion Coefficient, High B-value, T2) were resized, translated, cropped, and stitched to form spatially registered SRBP-MRI. Efficacy of noise reduction was tested by regularizing, eliminating principal components (PC), and minimizing elliptical volume from the covariance matrix to optimize the SCR. MRI guided biopsy (MRBx), Systematic Biopsy (SysBx), combination (MRBx + SysBx), or radical prostatectomy determined the ISUP grade for each patient. ISUP grade ≥ 2 (<2) was judged as CsPCa (CiPCa). Linear and logistic regression were fitted to ISUP grade and CsPCa/CiPCa SCR. Correlation Coefficients (R) and Area Under the Curves (AUC) for Receiver Operator Curves (ROC) evaluated the performance. Results: High correlation coefficients (R) (>0.55) and high AUC (=1.0) for linear and/or logistic fit from processed SCR and z-score for SRBP-MRI greatly exceed fits using prostate serum antigen, prostate volume, and patient age (R ~ 0.17). Patients assessed with combined MRBx + SysBx and from individual MRI scanners achieved higher R (DR = 0.207+/−0.118) than all patients used in the fits. Conclusions: In the first study, to date, spectral approaches for assessing tumor aggressiveness on SRBP-MRI have been applied and tested and achieved high values of R and exceptional AUC to fit the ISUP grade and CsPCA/CiPCA, respectively.

Exploring Radar Micro-Doppler Signatures for Recognition of Drone Types

In this study, we examine the use of micro-Doppler signals produced by different blades (i.e., puller and lifting blades) to aid in radar-based target recognition of small drones. We categorize small drones into three types based on their blade types: fixed-wing drones with only puller blades, multi-rotor drones with only lifting blades, and hybrid vertical take-off and landing (VTOL) fixed-wing drones with both lifting and puller blades. We quantify the radar signatures of the three drones using statistical measures, such as signal-to-noise ratio (SNR), signal-to-clutter ratio (SCR), Doppler speed, Doppler frequency difference (DFD), and Doppler magnitude ratio (DMR). Our findings show that the micro-Doppler signals of lifting blades in all three drone types were stronger than those of puller blades. Specifically, the DFD and DMR values of pusher blades were below 100 Hz and 0.3, respectively, which were much smaller than the 200 Hz and 0.8 values for lifting blades. The micro-Doppler signals of the puller blades were weaker and more stable than those of the lifting blades. Our study demonstrates the potential of using micro-Doppler signatures modulated by different blades for improving drone detection and the identification of drone types by drone detection radar.

Sonar Point Cloud Processing to Identify Sea Turtles by Pattern Analysis

Abundant in coastal areas, sea turtles are affected by high-intensity acoustic anthropogenic sounds. In this article, we offer a pattern-analysis-based detection approach to serve as a warning system for the existence of nearby sea turtles. We focus on the challenge of overcoming the low signal-to-clutter ratio (SCR) caused by reverberations. Assuming that, owing to low SCR, target reflections within the point cloud are received in groups, our detector searches for patterns through clustering to identify possible “blobs” in the point cloud of reflections, and to classify them as either clutter or a target. Our unsupervised clustering is based on geometrical and spectral constraints over the blob's member relations. In turn, the classification of identified blobs as either a target or clutter is based on features extracted from the reflection pattern. To this end, assuming that reflections from a sea turtle are stable but include spectral diversity due to distortions within the turtle's body, we quantify the stability of the blob's members and the entropy of their reflection spectrum. We test our detector in both the modeled simulations, and at sea, for the detection of sea turtles released after rehabilitation. The results show robustness to highly fluctuating target intensity and ability to detect at low SCR.

A Nonparametric Regression-Based Multi-Scale Gradient Correlation Filtering Method for Infrared Small Target Detection

Infrared small target detection, especially under low SCR conditions and complex backgrounds, is still a challenging research task. Considering the scale change caused by small targets rapidly moving, in this paper, a nonparametric regression-based multi-scale gradient correlation filtering (MGCF) detection method is proposed. First, a nonparametric regression method is applied to calculate the gradient of each point. Then, based on the unique gradient characteristics of small targets, a multi-scale gradient correlation (MGC) template is designed to distinguish small targets from clutter. After that, a multi-scale gradient correlation filtering method is proposed to enhance the target intensity and suppress clutter. At last, based on the obtained filtering response, an adaptive threshold segmentation method is adopted to extract real small targets. Experimental results demonstrate that the proposed method can fully improve the signal-to-clutter ratio (SCR) of small targets under different complex backgrounds. Moreover, compared with other baseline methods, the proposed method exhibits excellent detection performance.

SA-HPMHT for Maritime Dim Targets Tracking With Sensor Location Uncertainty

To address the problem of tracking low signal-to-clutter ratio (SCR) maritime targets with sensor location uncertainty, an effective track-before-detect (TBD) method, called the state augmentation histogram probabilistic multihypothesis tracking (SA-HPMHT) algorithm, is proposed in this article. In this algorithm, the initialization of new tracks is realized based on the constant false alarm rate (CFAR) detector with a low threshold and the <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${K}$ </tex-math></inline-formula> -means clustering algorithm. The target and sensor states are then simultaneously estimated in an iterative manner via a synthetic histogram and state augmentation (SA) method. In each iteration, we update the estimated sensor state and yield more accurate measured images, allowing for improved performance of detection and tracking targets. Finally, an <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${M}/{N}$ </tex-math></inline-formula> logic technology is invoked to confirm or terminate the tracks. The results of simulation and real dataset verification show that the SA-HPMHT algorithm has a better performance compared with the histogram probabilistic multihypothesis tracking (H-PMHT) algorithm and the sequential Monte Carlo probability hypothesis density (SMC-PHD) algorithm.

Pilot study for generating and assessing nomograms and decision curves analysis to predict clinically significant prostate cancer using only spatially registered multi-parametric MRI.

Current prostate cancer evaluation can be inaccurate and burdensome. To help non-invasive prostate tumor assessment, recent algorithms applied to spatially registered multi-parametric (SRMP) MRI extracted novel clinically relevant metrics, namely the tumor's eccentricity (shape), signal-to-clutter ratio (SCR), and volume. Conduct a pilot study to predict the risk of developing clinically significant prostate cancer using nomograms and employing Decision Curves Analysis (DCA) from the SRMP MRI-based features to help clinicians non-invasively manage prostatecancer. This study retrospectively analyzed 25 prostate cancer patients. MP-MRI (T1, T2, diffusion, dynamic contrast-enhanced) were resized, translated, and stitched to form SRMP MRI. Target detection algorithm [adaptive cosine estimator (ACE)] applied to SRMP MRI determines tumor's eccentricity, noise reduced SCR (by regularizing or eliminating principal components (PC) from the covariance matrix), and volume. Pathology assessed wholemount prostatectomy for Gleason score (GS). Tumors with GS >=4+3 (<=3+4) were judged as "Clinically Significant" ("Insignificant"). Logistic regression combined eccentricity, SCR, volume to generate probability distribution. Nomograms, DCA used all patients plus training (13 patients) and test (12 patients) sets. Area Under the Curves for (AUC) for Receiver Operator Curves (ROC) and p-values evaluated theperformance. Combining eccentricity (0.45 ACE threshold), SCR (3, 4 PCs), SCR (regularized, modified regularization) with tumor volume (0.65 ACE threshold) improved AUC (>0.70) for ROC curves and p-values (<0.05) for logistic fit. DCA showed greater net benefit from model fit than univariate analysis, treating "all," or "none." Training/test sets achieved comparable AUC but with higher p-values. Performance of nomograms and DCA based on metrics derived from SRMP-MRI in this pilot study were comparable to those using prostate serum antigen, age, and PI-RADS.

Infrared Small Target Detection Based on Local Contrast-Weighted Multidirectional Derivative

Realizing robust infrared small target detection in complex backgrounds is of great essence for infrared search and tracking (IRST) applications. However, the high-intensity structures in background regions, such as the sharp edges, make it a challenging task, especially when the target is with low signal-to-clutter ratio (SCR). To address this issue, we propose an infrared small target detection method using local contrast-weighted multidirectional derivative (LCWMD). It is a robust detector that comprehensively considers the target property, background information, and the relation between them. First, we take into account the approximate isotropy of the infrared small target and present a new multidirectional derivative with penalty factors based on the Facet model to develop the target salience in the local region. Second, a dual local contrast fusion model with the tri-layer design is introduced to amplify the difference between the target and the background, so as to further suppress the high-intensity structural clutters. Finally, the LCWMD map is obtained by weighting the above two filtered maps, after which an adaptive segmentation operation is applied to accomplish the target detection. The results of comparative experiments implemented on real infrared images demonstrate that our method outperforms other state-of-the-art detectors by several times in terms of signal-to-clutter ratio gain (SCRG) and background suppression factor (BSF).