S-shaped Research Articles

Scaffolds with a Tunable Nonlinear Elastic Region Using a Corrugated Design

Elastin is the main component of arteries and is responsible for their high‐elastic high‐strain capacity. The biomechanics of biological tissues typically display a stress–strain curve characterized by a sigmoidal shape that has an initial region with low stress and high strain. Studies aimed at mimicking such biomechanical behavior focus on improving the synthesis of elastin or replicating elastin behavior, which proves to be a continuous challenge. Alternatively, scaffolds' architecture can potentially mimic the sigmoidal stress–strain curve of tissues. Hence, the aim of this study was to replicate the stress–strain curve of a carotid artery using a tailorable corrugated design. Results showed that the corrugated design unfolded during extension without generating significant stress and displayed a sigmoidal stress–strain curve that could be controlled depending on the corrugation features. Editing the amount of fibers resulted in a different Young's modulus, while the amplitude of the fibers and the amount of repeating units influenced the initial nonlinear region of the stress–strain curve. Scaffolds made of poly(ε‐caprolactone) (PCL) and poly(ethylene oxide terephthalate)/poly(butylene terephthalate (PEOT/PBT) were compared to determine the applicability of the design principles to different biodegradable polymers that normally do not have the same biomechanical behavior of soft tissues like arteries. The optimized designs had a similar stress–strain curve within the physiological range as porcine arteries. The corrugated design can serve as a biomimicry approach for vascular grafts or an alternative to vascular stents.

Impact of Levee-Breach Width on the Channel–Levee–Floodplain: A Case Study in the Huaihe River Basin, China

Breach geometry is one essential feature for flood modelling in the channel–levee–floodplain system. It is hard to accurately predict the breach geometry because of its high uncertainty. However, due to the fact that breach geometry direct impacts the flow through the breach, the water surface profile in the channel and the flood hazard factors within the floodplain are changed with the breach geometry. To explore the impacts of breach width (one feature of the breach geometry) on the channel–levee–floodplain system, we took the Cinan Feiyou Flood Control Protection Area (CNFY-FCPA) in the middle reach of the Huaihe River Basin as the study area. We constructed a coupled 1D-2D hydrodynamic model to simulate the flooding with a series of breach-width scenarios. According to the simulation results of the models, we quantitatively analyzed the impacts of breach width on the inflow through the breach, fluvial flood process, and flood hazard factors in the CNFY-FCPA. The results indicate that (i) the relationship between the peak discharge (and inflow volume) and breach width was approximate to an S-shaped curve, while the peak discharge, inflow volume, and duration per unit width decreased with the wider breach; (ii) the breach caused a decrease in the water surface profile along the entire river sections; and (iii) while the breach width exceeded a certain width, the inundation area was nearly stable without changing with wider breach. The certain width was not the same in different rivers of 300 m in the Yinghe River and of 500 m in the Huaihe River. The research results can provide a scientific basis for flood-control and disaster-reduction decision making.

Individual subpulses of PSR B1916+14 and their polarization properties

ABSTRACT The individual subpulses of pulsars are regarded as their basic emission components, providing invaluable information for our understanding of the radio emission process in the pulsar magnetosphere. Nevertheless, subpulses are overlapped with each other along the rotation phase for most pulsars, making it difficult to study the statistical properties of subpulses. Among the pulsars observed by the Five-hundred-meter Aperture Spherical radio Telescope (FAST), PSR B1916+14 has a large number of isolated well-resolved subpulses in the high-time-resolution observations, having a typical width of 0.15 ms and a high linear polarization. We find that the number distribution of subpulses contributes dominantly to the mean profile. According to the emission geometry, these emission units come from a region roughly 155 km above the polar cap in the pulsar magnetosphere, and the length-scale of the basic emission units is approximately 120 m. The deviations of the polarization position angles for these single subpulses from the standard S-shaped curve are closely related to their fractional linear and circular polarization, and the large deviations tend to come from drifting subpulses.

Bromide Ion Impurity-Induced Reaction between Selenium(IV) and Acidic Bromate: Prototype of a Cycle with Autocatalytic Behavior.

The selenium(IV)-bromate reaction in an acidic medium using phosphoric acid/phosphate buffer was investigated by UV-vis spectroscopy monitoring the formation of bromine. In an excess of bromate, the absorbance-time curves measured at 450 nm display a characteristic sigmoidal shape having a fairly long induction period, while in the opposite case, when selenium(IV) species is used in excess, the measured data follow the rise and fall behavior. Depending on the excess of Se(IV) the final bromine-containing product is either an elementary bromine or bromide ion. Simultaneous evaluation of the measured kinetic traces clearly indicated that, surprisingly, no direct reaction takes place between the reactants. Instead of that, a trace amount of bromide ion impurity in the stock bromate solution is sufficient to drive the system via the oxidation of the bromide ion by bromate producing elementary bromine followed by the subsequent selenite-bromine reaction reestablishing the bromide ion to open a new cycle. As a result, the concentration of bromide ions increases in a sigmoidal fashion during the course of the reaction unless enough selenium(IV) species is present; hence, the overall synergetic effect observed is the autocatalytic rise of bromide ions. Therefore, the cycle mentioned above may be considered as a prototype of autocatalytic cycles. This observation prompted us to clarify the explicit difference between an autocatalytic cycle and an autocatalytic reaction.

Water desorption isotherms and thermodynamic properties of Ora-pro-nóbis (Pereskia aculeata Miller)

Desorption isotherms of ora-pro-nóbis leaves were determined at storage (5 °C, 10 °C, 20 °C, 30 °C, and 40 °C) and drying (40 °C, 50 °C, 60 °C, 70 °C, and 80 °C) temperatures by the gravimetric static method using saturated saline solutions to obtain relative humidities ranging from 5.20% to 98.48%. The net isosteric heat of desorption and thermodynamic properties such as differential enthalpy, differential entropy, and Gibbs free energy were also estimated. The GAB model presented the best parameters of fitting and the lowest Akaike and Bayesian information criteria values. The desorption isotherm patterns presented a sigmoid shape and were categorized as BET Type II sigmoid shape. The monolayer moisture content was estimated in 0.06 kg of water/kg of dry matter using the GAB model, and it remained constant at all temperatures. The leaves presented an optimal water activity equal to 0.35 at storage temperatures. The net isosteric heat of desorption decreased with increasing Xeq, and differential entropy increased with rising equilibrium moisture content (Xeq > 0.07). The enthalpy-entropy compensation was evaluated, and the desorption process is revealed to be entropy-driven and non-spontaneous.

Physical, chemical, and rheological properties of flour from accessions of Frafra potato (Solenostemon rotundifolius)

Frafra Potato (FP) is a climate-smart crop facing extinction in the tropical regions of Africa due to inadequate information about its properties. This study determined the physicochemical, functional, and rheological characteristics of flours from ten FP accessions to gauge their suitability for culinary purposes. The flour yield from FP tubers ranged from 59.3 % (E134) to 69.3 % (E111). While FP flours (FPF) exhibited consistent colour across accessions, variations in paste clarity were noted, ranging from 5.2 % (E145 and Maa-Lana) to 8.6 % (WAAPP). The least gelation concentration varied from 8 % (WAAPP) to 12 % (E 82, 111, 132, 134, 145). Released accessions showed higher protein and ash content than unreleased ones. Mineral composition differed significantly among accessions, including iron, calcium, zinc, and phosphorus, each with varying bioavailability percentages. Vitamin A content also varied across accessions. Proteins common in tuber crops, such as lipoxygenase, patatin, sporamin, tarin, and protease inhibitors (Bowman-Birk PIs), were identified in FPF. Amino acid analysis revealed nineteen amino acids, including seven essentials. FPF characteristics included a bulk density of 0.9 g/ml, oil and water binding capacities of 3 g/g and 1.3 g/g respectively, a pH of 6.4, and titratable acidity of 0.5. All FP flours displayed standard non-Newtonian behaviour, exhibiting pseudoplastic properties. They also showed a type II sigmoidal sorption curve, indicating increased equilibrium moisture content with higher water activity. Moisture sorption studies predicted a safe storage maximum allowable moisture content. These findings have practical implications for flour packaging and storage. The study underscores the culinary potential of Frafra potato and its role in addressing food and nutrition security in Ghana and Sub-Saharan Africa.

Polarization and single-pulse micro-structure studies of Rotating Radio Transient J0139+3336 with FAST

ABSTRACT The study of polarization and micro-structure is very important for understanding the radiation mechanism of Rotating Radio Transients (RRATs). Due to the limitations of telescope sensitivity and time resolution, studies of the polarization and micro-structure of RRATs have been rare in the past. In this work, we report on a high-time resolution and full polarization observation of RRAT J0139+3336 with the Five-hundred-meter Aperture Spherical Radio Telescope (FAST). A total of 96 burst pulses were detected in the 3-h observation. The degrees of linear and circular polarization and the shape of the polarization position angle (PPA) of the single pulses vary significantly. The average profile displays a small degree of linear and circular polarization, and the PPA exhibits a remarkably smooth and steep S-shaped curve, which are also characteristics of pulsars. The circular polarization in some single pulses demonstrates a clear sign change. We discuss the geometric structure of the emission beam based on the results from fitting the RVM model to the changes in the PPA. Using an autocorrelation analysis, the quasi-periodic micro-structure in the single pulse emission is detected with a median period of about 0.91 ms. We show that the position of RRAT J0139+3336 on the P–Pμ diagram falls in the normal pulsar (NP) region . The radio emission of RRAT J0139+3336 shows unique properties, such as the sign change in the circular polarization and quasi-periodicity in the micro-structure, which will provide important clues to the emission mechanism of RRATs.

Parameters of the Evapotranspiration-Yield Relationship in a Grass Mixture of English Ryegrass and Red Fescue

The study aims to establish the parameters of the relationship “Cumulative Evapotranspiration (ET) - yield from aboveground biomass” in a grass mixture of English ryegrass (Lolium perenne L.) and Red fescue (Festuca rubra L.). The results are necessary for the needs of landscaping in urbanized areas. Data from an experiment with the application of a regulated water deficit, carried out in the period 2009-2011 at the University of Forestry - Sofia on anthropogenic bulk soil, were used. Data on relative ET and relative yield were processed by the method of least squares, using three types of formulas - linear (FAO), power, and two-power. The most accurate is the two-power formula, which describes the dependence through an S-shaped curve at (raport of correlation) R=0.989. It has the following form: Y=[1–(1–x)1.74]5.29, where Y is the relative yield at the corresponding ET, which is denoted by x. High accuracy also shows the power formula, which has the following form: Y=1–2.23(1–x)1.28 and R=0.976. The FAO linear formula represents the relationship at R=0.805. It has the following form: Y=1–1.62(1–x).

Research on Cumulative Damage Induced by Cyclic Blasting of Tuff

This article establishes a numerical model for cumulative damage of surrounding rock that can simulate the characteristics of progressive cyclic blasting in tunnels based on explicit dynamics and “restart” technology, and conducts research on the cumulative damage law of surrounding rock induced by tunnel blasting. The results show that: (1) considering the characteristics of progressive cyclic blasting in tunnels, the degree and range of surrounding rock damage are significantly increased compared to single blasting, with an increase of about 50%; (2) the amount of damage caused by blasting in the surrounding rock follows a Boltamann function (S-shaped curve) evolution feature as the distance between the blasting centers increases. In practical applications, when evaluating the degree and range of damage to the surrounding rock at the current location, additional cumulative damage caused by adjacent footage cycles should be considered, and the damage value can be 1.5 times the damage value of the current single blasting condition

The Utility of the "LEONIS Mova" Steering Microcatheter in Flow Diverter Placement.

LEONIS Mova (SB-KAWASUMI LABORATORIES, Kanagawa, Japan, hereinafter called LEONIS Mova) is a steerable microcatheter (MC) that enables angle adjustment of the catheter tip using a hand-operated dial. LEONIS Mova may be useful for flow diverter placement when access to the distal parent artery with a conventional MC and microguidewire (MGW) is considered difficult or impossible. Here, we report three such cases encountered during flow diverter placement in large and giant internal carotid artery aneurysms. In Case 1, a strong S-shaped curve was observed in the proximal parent artery of a giant cerebral aneurysm, and the luminal structure of the parent artery was lost within the aneurysm. It was anticipated that the distal side of the parent artery would be difficult to access with conventional MC and MGW. By adjusting the tip of the LEONIS Mova toward the aneurysm outlet beyond the S-shaped curve, it was possible to induce the MGW to secure the distal parent artery easily. In Case 2, the inflow and outflow axes of the parent artery were completely misaligned at the site of the aneurysm, and stenosis was present in the distal parent artery. Firmly bending the catheter tip increased accommodation for the catheter, enabling the induction of an MGW to access the distal parent artery without kicking back. In Case 3, the lesion extended from the cavernous portion to the petrosal portion; however, by adjusting the tip of the LEONIS Mova toward the aneurysm outlet, it was possible to induce the MGW to secure the distal parent artery easily. In each case, the LEONIS Mova enabled more secure and prompt access to the parent artery than anticipated and facilitated flow diverter placement. Encountering difficult-to-access lesions is one reason endovascular treatment may be unsuccessful. The LEONIS Mova is an excellent device that can overcome this obstacle, and its utility in certain applications should be recognized.

Insights Into the Micromechanics of Dehydration‐Induced Gypsum to γ‐Anhydrite Phase Transition From Instrumented Microindentation Experiments

AbstractGypsum, an anisotropic hydrous mineral, localizes strain through dehydration‐induced embrittlement and hydrodynamic lubrication, affecting the deformation in active tectonic settings. Here, we examine the micromechanical status of syn‐ and post‐dehydration gypsum‐phases, crucial for understanding intra‐crystalline deformation. We micro‐indented the (010) planes of natural gypsum crystals from 30 to 140°C at various strain‐rates to track mechanical changes during progressive dehydration and phase transition. Thermogravimetric analyses reveal that gypsum dehydrates between 100 and 140°C following a sigmoidal curve. Micromechanical data show, at 30°C, the mean hardness of gypsum is 2.42 GPa, reducing to 0.5 GPa at 140°C, after complete dehydration. Following the sigmoidal dehydration trend, elastic modulus, fracture toughness, and yield stress likewise drops with progressive dehydration. The Gypsum‐Hemihydrate phase exhibits strain‐rate sensitive elastoplastic deformation between 30 and 110°C, as hardness decreases with increasing strain‐rate. We propose that delamination of the layers and extensive tensile cracking along [010] cause this strain‐rate sensitive behavior, displaying Indentation Size Effect. Dehydrated phases (Hemihydrate and γ‐Anhydrite) are formed as exfoliated pseudomorphic flakes through topotactic transformation along [010] and show two sets of oppositely dipping slip systems. During the late dehydration stage (120–140°C), plastic strain is accommodated by the sliding of these flakes along with inelastic pore compaction, resulting in strain‐rate insensitive plastic deformation of the system.

Effects of initial vegetation heterogeneity on competition of submersed and floating macrophytes

<p>Non-spatial models of competition between floating aquatic vegetation (FAV) and submersed aquatic vegetation (SAV) predict a stable state of pure SAV at low total available limiting nutrient level, <italic>N</italic>, a stable state of only FAV for high <italic>N</italic>, and alternative stable states for intermediate <italic>N</italic>, as described by an S-shaped bifurcation curve. Spatial models that include physical heterogeneity of the waterbody show that the sharp transitions between these states become smooth. We examined the effects of heterogeneous initial conditions of the vegetation types. We used a spatially explicit model to describe the competition between the vegetation types. In the model, the FAV, duckweed (<italic>L. gibba</italic>), competed with the SAV, Nuttall's waterweed (<italic>Elodea nuttallii</italic>). Differences in the initial establishment of the two macrophytes affected the possible stable equilibria. When initial biomasses of SAV and FAV differed but each had the same initial biomass in each spatial cell, the S-shaped bifurcation resulted, but the critical transitions on the <italic>N</italic>-axis are shifted, depending on FAV:SAV biomass ratio. When the initial biomasses of SAV and FAV were randomly heterogeneously distributed among cells, the vegetation pattern of the competing species self-organized spatially, such that many different stable states were possible in the intermediate <italic>N</italic> region. If <italic>N</italic> was gradually increased or decreased through time from a stable state, the abrupt transitions of non-spatial models were changed into smoother transitions through a series of stable states, which resembles the Busse balloon observed in other systems.</p>

Impact of cold storage on the oxygenation and oxidation reactions of red blood cells.

Introduction: Electrostatic binding of deoxyhemoglobin (Hb) to cytoplasmic domain of band 3 anion transport protein occurs as part of the glycolytic regulation in red blood cells (RBCs). Hb oxidation intermediates not only impact RBC's oxygenation but also RBC's membrane through the interaction with band 3. It is not known however whether these critical pathways undergo changes during the storage of RBCs. Methods and Results: Oxygen parameters of fresh blood showed a sigmoidal and cooperative oxygen dissociation curve (ODC) for the first week of storage. This was followed by a large drop in oxygen affinity (P50) (from 30 to 20mmHg) which remained nearly unchanged with a slight elevation in Bohr coefficients and a significant drop in extracellular acidification rates (ECAR) at the 42-day storage. Oxidation of Hb increased with time as well as the formation of a highly reactive ferryl Hb under oxidative stress conditions. Ferryl Hb interacted avidly with RBC's membrane's band 3, but to lesser extent with old ghost RBCs. Discussion: The observed alterations in RBC's oxygen binding may have been affected by the alterations in band 3's integrity which are largely driven by the internal iron oxidation of Hb. Restoring oxygen homeostasis in stored blood may require therapeutic interventions that target changes in Hb oxidation and membrane changes.

Software testing and release decision at different statistical confidence levels with consideration of debuggers’ learning and negligent factors

This research delves into the software testing process and its environmental factors to uncover the core elements influencing software reliability. Specifically, it focuses on the learning and negligent aspects of the software reliability growth model. The learning factor accelerates reliability growth, leading to an S-shaped curve in the mean value function, while the negligent factor highlights the occurrence of imperfect debugging. The study also uses Brownian motion and stochastic differential equations to establish statistical confidence intervals for reliability and costs. These intervals aid software managers in assessing potential release risks at various confidence levels, allowing them to make informed decisions considering resource constraints and desired system reliability levels across different scenarios.

Cotton morphological traits tracking through spatiotemporal registration of terrestrial laser scanning time-series data.

Understanding the complex interactions between genotype-environment dynamics is fundamental for optimizing crop improvement. However, traditional phenotyping methods limit assessments to the end of the growing season, restricting continuous crop monitoring. To address this limitation, we developed a methodology for spatiotemporal registration of time-series 3D point cloud data, enabling field phenotyping over time for accurate crop growth tracking. Leveraging multi-scan terrestrial laser scanning (TLS), we captured high-resolution 3D LiDAR data in a cotton breeding field across various stages of the growing season to generate four-dimensional (4D) crop models, seamlessly integrating spatial and temporal dimensions. Our registration procedure involved an initial pairwise terrain-based matching for rough alignment, followed by a bird's-eye view adjustment for fine registration. Point clouds collected throughout nine sessions across the growing season were successfully registered both spatially and temporally, with average registration errors of approximately 3cm. We used the generated 4D models to monitor canopy height (CH) and volume (CV) for eleven cotton genotypes over two months. The consistent height reference established via our spatiotemporal registration process enabled precise estimations of CH (R 2=0.95, RMSE = 7.6cm). Additionally, we analyzed the relationship between CV and the interception of photosynthetically active radiation (IPAR f ), finding that it followed a curve with exponential saturation, consistent with theoretical models, with a standard error of regression (SER) of 11%. In addition, we compared mathematical models from the Richards family of sigmoid curves for crop growth modeling, finding that the logistic model effectively captured CH and CV evolution, aiding in identifying significant genotype differences. Our novel TLS-based digital phenotyping methodology enhances precision and efficiency in field phenotyping over time, advancing plant phenomics and empowering efficient decision-making for crop improvement efforts.

Construction and Application of English teaching in vocational colleges Model under Output Orientation

Abstract The basic idea of teaching reform and practice is the teaching mode. This research, which is based on POA, examines how higher vocational English is taught under the direction of a new teaching model and assesses the viability and application of using POA to teach English in vocational institutions. This paper establishes an English teaching in vocational colleges model under POA, which consists of three parts: “driving,” “facilitating,” and “evaluating.”Through the improvement of the BP neural network, this research develops the English teaching in vocational colleges quality assessment model under POA, thereby verifying the efficacy of the model. The changes in students’ English achievement are explored through teaching experiments and the two-sided sigmoid curve. A value of 0.007<0.05 in the paired-sample t-test of the experimental class proves that compared with the traditional English teaching in vocational colleges model, the English teaching in vocational colleges model under POA has a more obvious promotion effect on English achievement. The improved BP neural network model produced quantitative assessments of teaching quality that are mostly in line with actual findings. The model is used to evaluate the quality of English instruction in vocational colleges under POA.

Light-induced spin-state switching in Fe(II) spin-crossover complexes with thiazole-based chelating ligands.

Homoleptic complexes [Fe(4bt)3](ClO4)2 (1), [Fe(2bt)3](ClO4)2 (2), and [Fe(3tpH)3](ClO4)2 (3) were obtained by a reaction between the Fe(II) precursor salt and the corresponding thiazole-based bidentate ligand (L = 4bt = 4,4'-bithiazole, 2bt = 2,2'-bithiazole, 3tpH = 3-(thiazol-2-yl)pyrazole). X-ray crystal structure determination revealed crystallization of solvent-free complex 1, a solvate 2·MeOH, and a co-crystal 3·2(3tpH). The crystal packing of all these complexes is dominated by one-dimensional interactions between the [Fe(L)3]2+ cations. These interactions are stronger in 2·MeOH and 3·2(3tpH), leading to cooperative and slightly hysteretic transitions between the high-spin and low-spin electronic configurations at ∼235 K and 159 K, respectively. In contrast, weaker intermolecular interactions in 1 result in a gradual spin crossover above 300 K, with the maximum fraction of the HS state ∼25% achieved at 400 K. Complexes 2 and 3·2(3tpH) exhibit light-induced excited spin state trapping (LIESST) under irradiation with white light or a 532 nm laser at 5 K. After the photoexcitation, the trapped metastable HS state relaxes to the ground LS state with the average relaxation temperature of 81 K and 68 K, respectively. Examination of the relaxation dynamics by optical absorption spectroscopy on a single crystal of 3·2(3tpH) revealed the sigmoidal shape of the relaxation curves at lower temperatures, attributed to cooperative effects, as well as a plateau at ∼10% of the HS fraction at intermediate temperatures, hinting at a more complex mechanism for the relaxation of the LIESST phase in this material.

Investigating the Growth of Bacteria using Double Sigmoid Model with Reparameterization

The growth of an organism can be modeled using a growth curve. However, bacteria's growth pattern differs from other organisms. Bacterial growth is divided into four phases: lag, logarithmic, stationary, and death. The experts re-parameterized the growth curve to match the growth phase of the bacteria. Bacterial growth patterns generally do not show a single sigmoid pattern but form two curves. Therefore, the double sigmoid model is more suitable. This study modeled the growth of the Pseudomonas putida bacteria by observing the optical density of the medium. Model parameters are estimated using the Non-Linear Least Square (NLS) method with the Gauss-Newton algorithm. The modeling results show that the double sigmoid model fits the growth curve of Pseudomonas putida better than the single sigmoid model. The Double Logistic model outperforms all models with the highest adjusted R2 and the smallest RMSE, AIC, and BIC values.

Fatigue Studies of Welded Stainless Steel 304L: Effect of Manufacturability and Weld Type, Choice of Fatigue Model, and Comparison to Pristine Material

Abstract This study investigates fatigue life and fracture in welded stainless steel 304L (SS 304L) resulting from load-controlled fatigue. This was done for specimens from two welding manufacturers. Mechanical testing was carried out using a MTS test frame in uniaxial tension. Specimens fabricated in 3 weld configurations (butt, lap, butt-with-backer) were cycled at stress ratio R = 0.1, frequency f = 5 Hz, and experienced varying mean tensile stress. A comparison of the fatigue life of welded and unwelded (or pristine) specimens determined that the fatigue life of welded specimens is considerably shorter. The microstructure in the parent material (PM), heat affected (HAZ) and fusion zones (FZ) was analyzed using SEM, and results suggest that, for a limited number of specimens (backer welds), fracture in the (FZ) was primarily the result of Zener-Stroh cracks. Most welded specimens fractured at the weld-HAZ interface (weld toe), and we postulate that stress concentrations primarily due to abrupt geometrical change at the weld interface led to crack initiation there. Additional stress concentrations at welding induced defects (resulting from high temperature) such as second phase particles, fatigue induced defects, and pre-existing impurities are responsible for crack initiation, crack growth, and eventual fracture. Comparison of unwelded and welded SN curve data using numerical curve fitting methods reveal that the fatigue life of pristine SS 304L follows the expected sigmoid shape found in literature (specifically the Chandran fatigue model), while that of welded SS 304L deviates considerably in low cycle fatigue (LCF) and follows the Basquin power law equation.

Assessment of Morphometric and Hypsometric Analysis of the Ruste Basin Using Remote Sensing and Geographical Information System Techniques

A basin’s characteristics and features need to be comprehended completely by conducting morphometric analysis, such as evaluating the basin’s size, form, and surface features, to estimate floods and erosion rates properly. The main objective of this investigation is to evaluate morphometric measures and hypsometric analysis of Erbil’s Ruste Basin employing remote sensing and geographical information system methods. To investigate the significant tributaries of the selected area, the hydrology tool within the Spatial Analysis Tools of ArcGIS, version 10.7, was utilized to define the basin boundaries, map the drainage networks, and obtain topographic data. The findings of the linear morphometric parameters revealed that the logarithmic relationship between stream orders and stream numbers was negative. The difference in stream order and number seen in the watershed is due to topography and bedrock influence. The results also showed a negative correlation between stream length and stream order, and a coefficient of determination of 0.972, which indicates that the basin is made of low-permeability formation and subsoil materials. Considering the areal morphometric parameters, the circularity ratio, elongation ratio, and form factor are 0.594, 0.853 and 0.572, respectively, suggested a semi-circular shape. A drainage density value of 2.259 km-1 showed that the Ruste Basin is a basin with steeply to very steeply sloping hilly terrain with varying plant covering. Furthermore, the Ruste Basin has high relief and slope with a relief ratio of 0.151 and basin relief of 2.576 km, both of which imply that it has a steep slope with high erosive force, limited infiltration, and a high runoff rate. Ruste Basin’s ruggedness number was 5.819, indicating that it has badlands topography. The average hypsometric integral was 0.467, denoting a mature basin featuring S-shaped hypsometric curves. In conclusion, the results showed that analysis of morphometric parameters and hypsometric integral and curve provides us with a notion to basin characterization and guidance to making appropriate decisions to establish effective actions to sustainable water and soil conservation and natural resources management through applying water harvesting methods, check dams, and bench terraces.