Side-chain Protection Research Articles

Cesium Carbonate Promoted Direct Amidation of Unactivated Esters with Amino Alcohol Derivatives.

Cesium carbonate promoted direct amidation of unactivated esters with amino alcohols was developed without the use of transition-metal catalysts and coupling reagents. This method enabled the synthesis of several serine-containing oligopeptides and benzamide derivatives with yields up to 90%. The methodology proceeds under mild reaction conditions and exhibits no racemization for most naturally occurring amino acid substrates. The reaction demonstrates good compatibility with primary alkyl and benzyl esters and broad tolerance for a range of amino acid substrates with nonpolar and protected side chains. The hydroxy group on the amine nucleophile was found to be critical for the reaction to be successful. A likely mechanism involving cesium coordination to the substrates enabling the subsequent proximity-driven acyl transfer was proposed. The practicality of this approach was demonstrated in the preparation of a biologically active nicotinamide derivative in a reasonable yield.

Water-resistant boronic ester vitrimer with hydrophobic side chain protection.

A boronic ester vitrimer with high hydrolytic stability afforded by fluorinated side-chain protection is reported, withstanding high moisture and underwater environments with no performance degradation, which can also be self-healed, reprocessed and recycled, presenting a significant step towards the design of more robust and eco-friendly circular materials.

Establishment of One-Pot Disulfide-Driven Cyclic Peptide Synthesis with a 3-Nitro-2-pyridinesulfenate.

We have developed a new one-pot disulfide-driven cyclic peptide synthesis. The entire process is carried out in the solid phase, thus eliminating complicated work up procedures to remove by-products and unreacted reagents and enabling production of high-purity cyclic disulfide peptides by simple cleavage of a peptidyl resin. The one-pot synthesis of oxytocin was accomplished in this way with an isolated yield of 28% over 13 steps. These include peptide chain elongation from an initial resin, sulfenylation of the protected side chain of a cysteine (Cys) residue, disulfide ligation between thiols in an additional peptide fragment and a 3-nitro-2-pyridinesulfenyl-protected cysteine (Cys(Npys))-containing peptide resin, subsequent intramolecular amide bond formation of the disulfide-connected fragments by an Ag+-promoted thioester method, followed by deprotection and HPLC purification.

Molecular Design of Lignin-Derived Side-Chain Phenolic Polymers toward Functional Radical Scavenging Materials with Antioxidant and Antistatic Properties.

This article reports a new family of functional side-chain phenolic polymers derived from lignin monomers, displaying a combination of properties that are usually mutually exclusive within a single material. This includes a well-defined molecular structure, transparency, antioxidant activity, and antistatic properties. Our design strategy is based on the lignin-derived bioaromatic monomer dihydroconiferyl alcohol (DCA), a promising and yet largely unexplored asymmetrical diol bearing one aliphatic and one phenolic hydroxyl group. A lipase-catalyzed (meth)acrylation protocol was developed to selectively functionalize the aliphatic hydroxy group of DCA while preserving its phenolic group responsible for its radical scavenging properties. The resulting mono-(meth)acrylated monomers were then directly copolymerized using reversible addition-fragmentation chain-transfer (RAFT) polymerization without any protection of the phenolic side chains. Kinetics studies revealed that, under select conditions, these unprotected phenolic groups surprisingly did not inhibit the radical polymerization and lead to polymers with defined molar masses, low dispersities, and block copolymers. Finally, applications of these new radical scavenging polymers were demonstrated using an antioxidant assay and antistatic experiments. This research opens the door to the direct incorporation of natural antioxidants within the synthetic polymer backbones, increasing the biobased content and limiting the leaching of potentially harmful additives.

Targeting Melanocortin Receptors Using SNAr-Type Macrocyclization: A Doubly Orthogonal Route to Cyclic Peptide Conjugates.

While a range of strategies exist to accomplish peptide macrocyclization, they are frequently limited by the need for orthogonal protection or provide little opportunity for structural diversification. We have evaluated an efficient macrocyclization method that employs nucleophilic aromatic substitution (SNAr) to create thioether macrocycles. This versatile macrocyclization, orthogonal to conventional peptide synthesis, can be performed in solution on unprotected peptidomimetics or on resin-bound peptides with side-chain protection in place. We show that the electron-withdrawing groups present in the products can be further utilized in subsequent orthogonal reactions to alter the peptide properties or to add prosthetic groups. The macrocyclization strategy was applied to the design of melanocortin ligands, generating a library of potent melanocortin agonists that exhibit distinct subtype selectivity.

Stereoselective Synthesis of a Protected Side Chain of Callipeltin A.

Matteson homologations of chiral boronic esters proved to be an excellent tool for the synthesis of highly functionalized amino and hydroxy acid residues. This method provides straightforward stereoselective access to the side chain of callipeltin A, a natural marine product with interesting biological activities. Furthermore, this protocol should allow for variations in the substitution pattern in future SAR studies, simply by choosing suitable nucleophiles during the homologation steps.

Water-Based Solid-Phase Peptide Synthesis without Hydroxy Side Chain Protection.

The development of protecting group-free synthesis has come to the forefront this century, as there is an increasing need to switch to greener synthetic methods. In peptide synthesis, a strategy of maximum protection offers the most efficient synthetic pathway, but minimal side chain protection is more favorable in terms of green chemistry. Here, we describe solid-phase peptide synthesis (SPPS) without hydroxy side chain protection based on an aqueous microwave (MW)-assisted method. First, we investigated the extent of O-acylation of the hydroxy side chain of Ser, Thr, and Tyr occurring in our method, which uses 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride. Under aqueous MW-assisted conditions, the coupling reaction proceeded efficiently without substantial O-acylation. Next, we applied the aqueous synthetic protocol without hydroxy side chain protection to synthesis of a laminin-related peptide, H-Tyr-Ile-Gly-Ser-Arg-NH2. HPLC analysis of the crude peptide revealed a single peak, suggesting the absence of side reactions including O-acylation and racemization. We also succeeded in synthesizing a difficult peptide sequence, acyl carrier protein (65-74) peptide, by aqueous SPPS without hydroxy or carboxamide side chain protection. Based on the eighth criterion of the 12 principles of green chemistry, namely, "reduce derivatives", our approach without hydroxy side chain protection will provide a greener peptide synthesis.

Synthesis of Cyclic Peptides in SPPS with Npb-OH Photolabile Protecting Group.

Significant efforts have been made in recent years to identify more environmentally benign and safe alternatives to side-chain protection and deprotection in solid-phase peptide synthesis (SPPS). Several protecting groups have been endorsed as suitable candidates, but finding a greener protecting group in SPPS has been challenging. Here, based on the 2-(o-nitrophenyl) propan-1-ol (Npp-OH) photolabile protecting group, a structural modification was carried out to synthesize a series of derivatives. Through experimental verification, we found that 3-(o-Nitrophenyl) butan-2-ol (Npb-OH) had a high photo-release rate, high tolerance to the key conditions of Fmoc-SPPS (20% piperidine DMF alkaline solution, and pure TFA acidic solution), and applicability as a carboxyl-protective group in aliphatic and aromatic carboxyl groups. Finally, Npb-OH was successfully applied to the synthesis of head–tail cyclic peptides and side-chain–tail cyclic peptides. Moreover, we found that Npb-OH could effectively resist diketopiperazines (DKP). The α-H of Npb-OH was found to be necessary for its photosensitivity in comparison to 3-(o-Nitrophenyl)but-3-en-2-ol (Npbe-OH) during photolysis-rate verification.

Stereoselective Synthesis of a Protected Side Chain of Meliponamycin A.

The Matteson homologation was found to be a versatile tool for the construction of the linear polyketide side chain of meliponamycin and related compounds in only four steps. The ester dienolate version of this reaction allowed the introduction of the unsaturated ester moiety in a highly stereoselective fashion. Boronate oxidation/deoxygenation and Sharpless dihydroxylation are additional key steps in the stereoselective construction of this highly functionalized tetrahydropyran ring system, which is characteristic of this substance class.

Total Synthesis of Nocardiotide A by Using a Combination of Solid‐ and Solution‐Phase Methods

AbstractNocardiotide A has been successfully synthesized using a combination of solid‐ and solution‐phase synthesis. Peptides 1 and 2 of nocardiotide A, with different C and N termini, were synthesized on 2‐chlorotrityl chloride resin. A combination of N,N,N′,N′‐tetramethyl‐O‐(1H‐benzotriazol‐1‐yl)uronium hexafluorophosphate and hydroxybenzotriazole (HBTU/HOBt) was employed as coupling reagent and the release of the linear peptides from the resin was undertaken using AcOH and trifluoroethanol (TFE) reagents resulting in linear hexapeptides with protected side chains in good yields (83.4 % and 76 %, respectively). Peptide 1, which has Ala as C terminus and Trp as N terminus, was the only peptide that was successfully cyclized without epimerization under a dilute condition (1.25×10−3 M) using HBTU (3 equiv.) and 1 % N,N‐diisopropylethylamine (DIPEA) in dichloromethane. A combination of a small residue at the C terminus and a larger residue at the N terminus was found to be effective for the cyclization. The protecting group of the crude cyclic product was then deprotected by 95 % TFA in water and the crude was then purified to give white solid product with 16 % overall yield. The peptide was then characterized by HR‐ToFMS, 1H‐ and 13C‐NMR spectroscopy. In order to ensure the absence of epimerization during cyclization, the D‐analogue of nocardiotide A was synthesized using similar synthetic protocol. The NMR data of D‐analogue was found to have a larger difference compared to the synthetic and natural product, showing there is no epimerization at C‐terminus during cyclization.

Replication of Sequence Information in Synthetic Oligomers.

ConspectusThe holy grail identified by Orgel in his 1995 Account was the development of novel chemical systems that evolve using reactions in which replication and information transfer occur together. There has been some success in the adaption of nucleic acids to make artificial analogues and in templating oligomerization reactions to form synthetic homopolymers, but replication of sequence information in synthetic polymers remains a major unsolved problem. In this Account, we describe our efforts in this direction based on a covalent base-pairing strategy to transfer sequence information between a parent template and a daughter copy. Oligotriazoles, which carry information as a sequence of phenol and benzoic acid side chains, have been prepared from bifunctional monomers equipped with an azide and an alkyne. Formation of esters between phenols and benzoic acids is used as the equivalent of nucleic base pairing to covalently attach monomer building blocks to a template oligomer. Sequential protection of the phenol side chains on the template, ester coupling of the benzoic acid side chains, and deprotection and ester coupling of the phenol side chains allow quantitative selective base-pair formation on a mixed sequence template. Copper catalyzed azide alkyne cycloaddition (CuAAC) is then used to oligomerize the monomers on the template. Finally, cleavage of the ester base pairs in the product duplex by hydrolysis releases the copy strand. This covalent template-directed synthesis strategy has been successfully used to copy the information encoded in a trimer template into a sequence-complementary oligomer in high yield.The use of covalent base pairing provides opportunities to manipulate the nature of the information transferred in the replication process. By using traceless linkers to connect the phenol and benzoic acid units, it is possible to carry out direct replication, reciprocal replication, and mutation. These preliminary results are promising, and methods have been developed to eliminate some of the side reactions that compete with the CuAAC process that zips up the duplex. In situ end-capping of the copy strand was found to be an effective general method for blocking intermolecular reactions between product duplexes. By selecting an appropriate concentration of an external capping agent, it is also possible to intercept macrocyclization of the reactive chain ends in the product duplex. The other side reaction observed is miscoupling of monomer units that are not attached to adjacent sites on the template, and optimization is required to eliminate these reactions. We are still some way from an evolvable synthetic polymer, but the chemical approach to molecular replication outlined here has some promise.

Allosteric Priming of E. coli CheY by the Flagellar Motor Protein FliM

Phosphorylation of Escherichia coli CheY protein transduces chemoreceptor stimulation to a highly cooperative flagellar motor response. CheY binds to the N-terminal peptide of the FliM motor protein (FliMN). Constitutively active D13K-Y106W CheY has been an important tool for motor physiology. The crystal structures of CheY and CheY ⋅ FliMN with and without D13K-Y106W have shown FliMN-bound CheY contains features of both active and inactive states. We used molecular dynamics (MD) simulations to characterize the CheY conformational landscape accessed by FliMN and D13K-Y106W. Mutual information measures identified the central features of the long-range CheY allosteric network between D57 phosphorylation site and the FliMN interface, namely the closure of the α4-β4 hinge and inward rotation of Y- or W106 with W58. We used hydroxy-radical foot printing with mass spectroscopy (XFMS) to track the solvent accessibility of these and other side chains. The solution XFMS oxidation rate correlated with the solvent-accessible area of the crystal structures. The protection of allosteric relay side chains reported by XFMS confirmed the intermediate conformation of the native CheY ⋅ FliMN complex, the inactive state of free D13K-Y106W CheY, and the MD-based network architecture. We extended the MD analysis to determine temporal coupling and energetics during activation. Coupled aromatic residue rotation was a graded rather than a binary switch, with Y- or W106 side-chain burial correlated with increased FliMN affinity. Activation entrained CheY fold stabilization to FliMN affinity. The CheY network could be partitioned into four dynamically coordinated sectors. Residue substitutions mapped to sectors around D57 or the FliMN interface according to phenotype. FliMN increased sector size and interactions. These sectors fused between the substituted K13-W106 residues to organize a tightly packed core and novel surfaces that may bind additional sites to explain the cooperative motor response. The community maps provide a more complete description of CheY priming than proposed thus far.

Dedicated to a peptide chemist of few words and immense impact: Louis A. Carpino

Dedicated to a peptide chemist of few words and immense impact: Louis A. Carpino

Improved Fmoc‐solid‐phase peptide synthesis of an extracellular loop of CFTR for antibody selection by the phage display technology

Cystic fibrosis (CF), a life-shortening genetic disease, is caused by mutations in the CF transmembrane conductance regulator (CFTR) gene that codes for the CFTR protein, the major chloride channel expressed at the apical membrane of epithelial cells. The development of an imaging probe capable of non-invasively detect CFTR at the cell surface could be of great advantage for the management of CF. With that purpose, we synthesized the first extracellular loop of CFTR protein (ECL1) through fluorenylmethyloxycarbonyl (Fmoc)-based microwave-assisted solid-phase peptide synthesis (SPPS), according to a reported methodology. However, aspartimide formation, a well-characterized side reaction in Fmoc-SPPS, prompted us to adopt a different side-chain protection strategy for aspartic acid residues present in ECL1 sequence. The peptide was subsequently modified via PEGylation and biotinylation, and cyclized through disulfide bridge formation, mimicking the native loop conformation in CFTR protein. Herein, we report improvements in the synthesis of the first extracellular loop of CFTR, including peptide modifications that can be used to improve antigen presentation in phage display for selection of novel antibodies against plasma membrane CFTR.

Diversity-oriented synthesis of peptide-boronic acids by a versatile building-block approach.

A new strategy for the synthesis of peptide-boronic acids (PBAs) is presented. 20 Fmoc-protected natural amino acids with orthogonal side-chain protection were straightforwardly converted into their corresponding boron analogues in three simple steps. Subsequent immobilisation on commercially available 1-glycerol polystyrene resin and on-resin transformations yielded a diversity of sequences in high purity. The strategy eliminates various synthetic obstacles such as multi-step routes, low yields, and inseparable impurities. The described method comprises great potential to be implemented in automated combinatorial approaches by markedly facilitating the access to a variety of PBAs. The coupling of amino acids or other building blocks with α-aminoboronates allows the creation of hybrid molecules with significant potential in various scientific disciplines, such as medicinal chemistry, structural biology, and materials science.

Chemical Modification of the N Termini of Unprotected Peptides for Semisynthesis of Modified Proteins by Utilizing a Hydrophilic Protecting Group.

A simple and efficient strategy for the selective modification of the peptide N terminus with an unnatural amino acid is described. A peptide having a SUMO-HisTag-TEV sequence (SUMO: small ubiquitin-related modifier, TEV: tobacco etch virus) preceding the N terminus of the target peptide was designed. Recombinant expression in E. coli and subsequent SUMO protease cleavage yielded the HisTag-TEV-target peptide. Partial protection of the lysine side chains of this peptide with d-glucopyranosyloxycarbonyl and removal of the HisTag-TEV sequence by TEV protease yielded the partially protected peptide with a free N-terminal amine. Coupling of selenocysteine selectively at the N terminus and subsequent acidic deprotection of the carbohydrate protecting groups yielded a modified peptide that can be used for native chemical ligation (NCL). As a proof of concept, the modification of a longer recombinant peptide with selenocysteinylserine (GalNAc) at the N terminus was demonstrated.

The aspartimide problem persists: Fluorenylmethyloxycarbonyl‐solid‐phase peptide synthesis (Fmoc‐SPPS) chain termination due to formation of N‐terminal piperazine‐2,5‐diones

Aspartimide (Asi) formation is a notorious side reaction in peptide synthesis that is well characterized and described in literature. In this context, we observed significant amounts of chain termination in Fmoc‐SPPS while synthesizing the N‐terminal Xaa‐Asp‐Yaa motif. This termination was caused by the formation of piperazine‐2,5‐diones. We investigated this side reaction using a linear model peptide and independently synthesizing its piperazine‐2,5‐dione derivative. Nuclear magnetic resonance (NMR) data of the side product present in the crude linear peptide proves that exclusively the six‐membered ring is formed whereas the theoretically conceivable seven‐membered 1,4‐diazepine‐2,5‐dione is not found. We propose a mechanism where nucleophilic attack of the N‐terminal amino function takes place at the α‐carbon of the carbonyl group of the corresponding Asi intermediate.In addition, we systematically investigated the impact of (a) different adjacent amino acid residues, (b) backbone protection, and (c) side chain protection of flanking amino acids. The side reaction is directly related to the Asi intermediate. Hence, hindering or avoiding Asi formation reduces or completely suppresses this side reaction.

N,N-Dimethylaminoxy Carbonyl, a Polar Protecting Group for Efficient Peptide Synthesis.

Peptide coupling with minimal protection is one of the desired methods for the synthesis of peptides and proteins. To achieve regioselective amide bond formation, side chain protection is often essential; however, protecting groups potentially diminish peptide solubility and render the polar polyamide chain amphipathic due to their apolar nature. In this manuscript, we describe a new protecting group, N,N-dimethylaminoxy carbonyl (Dmaoc), and its use in peptide coupling reactions. The Dmaoc group has a relatively polar character compared to the Boc group, which is a conventional protecting group for the Nε-amine of Lys residues. This polar protecting group is removable by reduction in the buffer containing (±)-dithiothreitol (DTT). Furthermore, the Dmaoc group proved compatible with peptide ligation strategies featuring the activation of N-acyl diaminobenzamides (Dbz) with sodium nitrate to generate the respective benzotriazole leaving group. The Dmaoc/Dbz strategy described in this manuscript provides a new method for the chemical synthesis of peptides.

Facile solid-phase ruthenium assisted azide-alkyne cycloaddition (RuAAC) utilizing the Cp∗RuCl(COD)-catalyst

The ruthenium assisted azide-alkyne cycloaddition (RuAAC) reaction is a well-established method for the generation of 1,5- and 1,4,5-substituted 1,2,3-triazoles, which we have extended to the solid-phase synthesis of 1,2,3-triazole-peptides. The 1,2,3-triazole moieties were formed upon the reaction of alkynes with a solid-phase bound secondary azide in the presence of the Cp∗RuCl(COD) catalyst at room temperature. Both terminal and internal alkynes underwent highly regioselective cycloaddition reactions under mild conditions, facilitating release of the peptide construct from the resin with intact side-chain protection. Almost quantitative conversion to the corresponding 1,2,3-triazoles was observed within 1 h.

Reversible Macrocyclization of Peptides with a Conjugate Acceptor.

Macrocyclic peptides are an increasingly important class of biopharmaceuticals. A new method of macrocyclization is reported that involves reaction of the N-terminal amine and thiol side chain of cysteine with a Meldrum's acid derived conjugate acceptor. This reaction, which utilizes naturally occurring amino acids and requires no orthogonal protection of side chains, can also be reversed to yield the original linear peptide as desired.