Side Reactions Research Articles

Transition Metal-Catalyzed C(sp3)-C(sp3) Coupling to Construct All-Carbon Quaternary Carbon Centers

Transition metal-catalyzed C(sp³)-C(sp³) coupling reactions represent a powerful strategy for constructing all-carbon quaternary centers. However, these reactions remain challenging due to significant steric hindrance effects and the propensity for side reactions such as elimination and isomerization. This review provides a comprehensive summary of the progress made over the past few decades in the construction of all-carbon quaternary centers, with a focus on coupling reactions involving tertiary C(sp³) and primary/secondary C(sp³) centers (as the cross coupling of two tertiary C(sp³) centers remains unsuccessful). The discussion is organized around reaction conditions, substrate scope, and reaction mechanisms, and a brief overview of transformations based on these coupling reactions is also presented.

Formulating Self-Repairing Solid Electrolyte Interface via Dynamic Electric Double Layer for Practical Zinc Ion Batteries.

Zinc ion batteries (ZIBs) encounter interface issues stemming from the water-rich electrical double layer (EDL) and unstable solid-electrolyte interphase (SEI). Herein, we propose the dynamic EDL and self-repairing hybrid SEI for practical ZIBs via incorporating the horizontally-oriented dual-site additive. The rearrangement of distribution and molecular configuration of additive constructs the robust dynamic EDL under different interface charges. And, a self-repairing organic-inorganic hybrid SEI is constructed via the electrochemical decomposition of additive. The dynamic EDL and self-repairing SEI accelerate interfacial kinetics, regulate deposition and suppress side reactions in the both stripping and plating during long-term cycles, which affords high reversibility for 500 h at 42.7 % depth of discharge or 50 mA ⋅ cm-1. Remarkably, Zn//NVO full cells deliver the impressive cycling stability for 10000 cycles with 100 % capacity retention at 3 A ⋅ g-1 and for over 3000 cycles even at lean electrolyte (7.5 μL ⋅ mAh-1) and high loading (15.26 mg ⋅ cm-2). Moreover, effectiveness of this strategy is further demonstrated in the low-temperature full cell (-30 °C).

Hydrogel Electrolyte with Regulated Water Activity and Hydrogen Bond Network for Ultra‐Stable Zinc Electrode

AbstractQuasi‐solid‐state zinc‐ion batteries (QZIBs) have attracted wide attention due to their excellent dimensional stability and high safety. However, poor ion conduction capabilities, severe dendrite growth, and rampant side reactions still hinder their commercialization. The regulation of the solvation structure of Zn2+ is considered to be an effective method to address these issues. Herein, a hydrogel electrolyte with a regulated solvation structure (HE‐RS) is designed via the combination of tetramethyl urea (TMU) additive and polyvinyl alcohol (PVA) matrix. The hydrophilic ─C═O group of TMU exhibits strong affinity with the PVA chains, improving the mechanical strength of the PVA matrix. The ─N(CH3)2 groups at both ends of TMU exhibit strong hydrophobic characteristics, which leads to local hydrophobicity and decreased water activity. Additionally, abundant oxygen‐containing (electronegative) groups on both PVA and TUM can adsorb Zn2+ and provide sites for Zn2+ transference. Benefiting from these merits, Zn2+ solvation structure and deposition behavior are regulated. Consequently, the Zn||Zn symmetric cell with HE‐RS exhibits a stable cycling life exceeding 2000 h. Moreover, the HE‐RS‐based Zn||NH4V4O10 cell exhibits a capacity retention of 96.4% after 1000 cycles at 2 A g−1.

Regulating Anode-Electrolyte Interphasial Reactions by Zwitterionic Binder Chemistry in Lithium-Ion Batteries with High-Nickel Layered Oxide Cathodes and Silicon-Graphite Anodes.

The practical application of silicon (Si)-based anodes faces challenges due to severe structural and interphasial degradations. These challenges are exacerbated in lithium-ion batteries (LIBs) employing Si-based anodes with high-nickel layered oxide cathodes, as significant transition-metal crossover catalyzes serious parasitic side reactions, leading to faster cell failure. While enhancing the mechanical properties of polymer binders has been acknowledged as an effective means of improving solid-electrolyte interphase (SEI) stability on Si-based anodes, an in-depth understanding of how the binder chemistry influences the SEI is lacking. Herein, a zwitterionic binder with an ability to manipulate the chemical composition and spatial distribution of the SEI layer is designed for Si-based anodes. It is evidenced that the electrically charged microenvironment created by the zwitterionic species alters the solvation environment on the Si-based anode, featuring rich anions and weakened Li+-solvent interactions. Such a binder-regulated solvation environment induces a thin, uniform, robust SEI on Si-based anodes, which is found to be the key to withstanding transition-metal deposition and minimizing their detrimental impact on catalyzing electrolyte decomposition and devitalizing bulk Si. As a result, albeit possessing comparable mechanical properties to those of commercial binders, the zwitterionic binder enables superior cycling performances in high-energy-density LIBs under demanding operating conditions.

Ion‐Transport Kinetics and Interface Stability Augmentation of Zinc Anodes Based on Fluorinated Covalent Organic Framework Thin Films

AbstractZinc (Zn) emerges as an ideal anode for aqueous‐based energy storage devices because of its safety, non‐toxicity, and cost‐effectiveness. However, the reversibility of zinc anodes is constrained by unchecked dendrite proliferation and parasitic side reactions. To minimize these adverse effects, a highly oriented, crystalline 2D porous fluorinated covalent organic framework (denoted as TpBD‐2F) thin film is in situ synthesized on the Zn anode as a protective layer. The zincophilic and hydrophobic TpBD‐2F provides numerous 1D fluorinated nanochannels, which facilitate the hopping/transfer of Zn2+ and repel H2O infiltration, thus regulating Zn2+ flux and inhibiting interfacial corrosion. The resulting TpBD‐2F protective film enabled stable plating/stripping in symmetric cells for over 1200 h at 2 mA cm−2. Furthermore, assembled full cells (Zn‐ion capacitors) deliver an ultra‐long cycling life of over 100 000 cycles at a current density of 5 A g−1, outperforming nearly all reported porous crystalline materials.

2D Microporous Polymers/Reduced Graphene Oxide with Built-In Lithiophilic Sites for Uniform Lithium Deposition in Lithium Metal Anode.

Lithium (Li) metal is an attractive anode material for use in high-energy lithium-sulfur and lithium-air batteries. However, its practical application is severely impeded by excessive dendrite growth, huge volume changes, and severe side reactions. Herein, a novel Li metal anode composed of lithiophilic two dimensional (2D) conjugated microporous polymer (Li-CMP) and reduced graphene oxide (rGO) sandwiches (Li-CMP@rGO) for Li metal batteries (LiMBs) is reported. In the Li-CMP@rGO anode, the conductive rGO facilitates the charge transfer while the functionalized-CMP provides Li nucleation sites within the micropores, thereby preventing dendrite growth. As a result, the Li-CMP@rGO anode can be cycled smoothly at 6mA cm-2 of current density with a platting capacity of 2 mAh cm-2 for 1000h. A Coulombic efficiency of 98.4% is achieved over 350 cycles with a low overpotential of 28mV. In a full cell with LiFePO4 cathode, the Li-CMP@rGO anode also exhibited good cycling stability compared to CMP@rGO and CMP/Super-P. As expected, the simulation results reveal that Li-CMP@rGO has a strong affinity for Li ions compared to CMP@rGO. The strategies adopted in this work can open new avenues for designing hybrid porous host materials for developing safe and stable Li metal anodes.

Regeneration of spent graphite via graphite-like turbostratic carbon coating for advanced Li ion battery anode

Recycling spent graphite (SG) from lithium-ion batteries is an effective approach to reduce resource waste and address environmental issues. The main reasons for the capacity degradation of graphite anode are the structural destruction and changes in surface composition during the cycling process. However, repairing the graphite with satisfactory electrochemical properties remains a significant challenge due to the lack of efficient recycling methods. Herein, a low-temperature magnesium catalytic method is developed to reconstruct turbostratic carbon coating and repair defects in SG at 900 °C. The dense turbostratic carbon not only effectively repairs the surface damage of the SG and mitigates the occurrence of side reactions but also improves the Li+ and electron transfer kinetics of SG. The regenerated graphite anode exhibits high initial Coulombic efficiency (ICE) of 86.2 %, a high capacity of 350 mAh g−1 after 500 cycles at 0.5 C with a capacity retention of 96.5 %, which reaches the requirements of commercial applications. Furthermore, a techno-economic analysis shows that this strategy has higher environmental and economic benefits compared to conventional recycling methods.

Formulating Electrolytes for 4.6 V Anode-Free Lithium Metal Batteries

High-voltage initial anode-free lithium metal batteries (AFLMBs) promise the maximized energy densities of rechargeable lithium batteries. However, the reversibility of the high-voltage cathode and lithium metal anode is unsatisfactory in sustaining their long lifespan. In this research, a concentrated electrolyte comprising dual salts of LiTFSI and LiDFOB dissolved in mixing solvents of dimethyl carbonate (DMC) and fluoroethylene carbonate (FEC) with a LiNO3 additive was formulated to address this challenge. FEC and LiNO3 regulate the anion-rich solvation structure and help form a LiF, Li3N-rich solid electrolyte interphase (SEI) with a high lithium plating/stripping Coulombic efficiency of 98.3%. LiDFOB preferentially decomposes to effectively suppress the side reaction at the high-voltage operation of the Li-rich Li1.2Mn0.54Ni0.13Co0.13O2 cathode. Moreover, the large irreversible capacity during the initial charge/discharge cycle of the cathode provides supplementary lithium sources for cycle life extension. Owing to these merits, the as-fabricated AFLMBs can operate stably for 80 cycles even at an ultrahigh voltage of 4.6 V. This study sheds new insights on the formulation of advanced electrolytes for highly reversible high-voltage cathodes and lithium metal anodes and could facilitate the practical application of AFLMBs.

Anion Receptor-manipulated solvation chemistry and electric double layer enables high Zn-Utilization rate and lean Zn metal batteries

The practical application of aqueous Zn metal batteries (AZMBs) is impeded by inferior reversibility and stability of Zn metal anode (ZMA) originated from side reactions and dendrite growth. Herein, anion receptor l-Proline (LP) is selected to simultaneously manipulate solvation chemistry and electric double layer (EDL) for constructing dendrite-free and stable AZMBs with an ultra-high depth of discharge (DOD of 100 %) and low negative/positive capacity ratio (N/P of 1.1). Experimental and computational results demonstrate that the strong interaction between −SO32- group from OTf- anion and LP promotes the coordination effect of cation and solvent, which improves the stability of electrolyte and induces fine and uniform Zn nucleus formation. Meanwhile, the preferential reduction of OTf- and adsorption of LP establish an anion-derived ZnF2-rich solid electrolyte interface by altering EDL structure, which enhances the mechanical stability and Zn2+ diffusion kinetics of the interface and prevents the contact of H2O molecules. Consequently, ZMA in LP/Zn(OTf)2 electrolyte delivers a satisfactory cycling lifespan under DOD of 100 % and an outstanding Coulombic efficiency of 99.93 % for 10,000 cycles at 10 mA cm−2. Moreover, Zn||Od-NH4V4O10 full cells with LP/Zn(OTf)2 electrolyte demonstrate excellent cycle stability at high cathode loading (20.412 mg), low N/P (1.1), and high temperature (50 °C).

Modification of Cu-Based Current Collectors and Their Application in High-Performance Zn Metal Anode: A Review

Zinc-based batteries (ZBBs) have proven to be tremendously plausible for large-scale electrochemical energy storage applications due to their merits of desirable safety, low-cost, and low environmental impact. Nevertheless, the zinc metal anodes in ZBBs still suffer from many issues, including dendrite growth, hydrogen evolution reactions (HERs), corrosion, passivation, and other types of undesirable side reactions, which severely hinder practical application. The modification of Cu-based current collectors (CCs) has proven to be an efficient method to regulate zinc deposition and prevent dendritic growth, thereby improving the Coulombic efficiency (CE) and lifespan of batteries (e.g., up to 99.977% of CE over 6900 cycles after modification), which is an emerging research topic in recent years. In this review, we provide a systematic overview of the modification of copper-based CCs and their application in zinc metal anodes. The relationships between their modification strategies, nano-micro-structures, and electrochemical performance are systematically reviewed. Ultimately, their promising prospects for future development are also proposed. We hope that this review could contribute to the design of copper-based CCs for zinc-based batteries and facilitate their practical application.

Bifunctional modulation of Li-rich layered oxide cathode material via W-modification for improved electrochemical performance

Lithium-rich layered oxides (LRLOs) have raised the greatest attention to the high-energy-density Li-ion batteries. Nevertheless, the undesirable interfacial side reactions and the structure transformation cause fast voltage fading and poor capacity retention of LRLO cathodes, which extremely prevent their practical application. Surface coating or lattice doping has been an effective strategy to improve its electrochemical properties. However, the general performance of the material can only be limitedly promoted. Herein, we proposed a bifunctional modulation of LRLO cathodes coupled by bulk-phase W-doping and surficial Li2WO4 nanocoating of LRLOs using a facile synchronous lithiation strategy under a high-temperature solid-state treatment. The modified material (2 mol% W6+ modified) showed a distinguished discharge capability of 260.5 mAh/g at 0.1 C after 50 cycles. Meanwhile, a competitive capacity retention of 95.38% at 1 C after 100 cycles was achieved. The splendid electrochemical performance can be the result of the increased interlayer spacing for enhancing Li+ diffusion kinetics and the stronger W–O bond for alleviating oxygen release after W-doping and Li2WO4 nanocoating, which not only accelerates the Li+ transfer rate as its fast Li+ transfer channels but also act as a transitional interface layer to restrain the interfacial adverse reactions.

Mechanisms of Controllable Growth and Ohmic Contact of Two-Dimensional Molybdenum Disulfide: Insight from Atomistic Simulations.

ConspectusTwo-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs), in particular molybdenum disulfide (MoS2), have recently attracted huge interest due to their proper bandgap, high mobility at 2D limit, and easy-to-integrate planar structure, which are very promising for extending Moore's law in postsilicon electronics technology. Great effort has been devoted toward such a goal since the demonstration of protype MoS2 devices with high room-temperature on/off current ratios, ultralow standby power consumption, and atomic level scaling capacity down to sub-1-nm technology node. However, there are still several key challenges that need to be addressed prior to the real application of MoS2-based electronics technology. The controllable growth of wafer-scale single-crystal MoS2 on industry-compatible insulating substrates is the prerequisite of application while the currently synthesized MoS2 films mostly are polycrystalline with limited sizes of single-crystal domains and may involve metal substrates. The precise layer-control is also very important for MoS2 growth since its electronic properties are layer-dependent, whereas the layer-by-layer growth of multilayer MoS2 dominated by the van der Waals (vdW) epitaxy leads to poor thickness uniformity and noncontinuously distributed domains. High density up to 1013 cm-2 of sulfur vacancies (SVs) in grown MoS2 can cause unfavorable carrier scatting and electronic properties variations and will inevitably disturb the device performance. The dangling-bond-free surface of MoS2 gives rise to an inherent vdW gap at metal-semiconductor (M-S) contact, which leads to high electrical resistance and poor current-delivery capability at the contact interface and thereby substantially limits the performances of MoS2 devices.In this Account, we briefly review recent experimental and theoretical attempts for addressing the aforementioned challenges and present our own insights from atomistic simulations. We theoretically revealed the vital role of substrate steps for guiding unidirectional nucleation of monolayer MoS2 and uniform nucleation and edge-aligned growth of bilayer MoS2 by advanced simulations. The established thermodynamic mechanisms have successfully directed the experimental works on the controllable growth of 2 in. single-crystal monolayer and centimeter-scale uniform bilayer MoS2. The postgrowth repair mechanism of SV defect in MoS2 via thiol chemistry treatment has been theoretically explored with the consideration of side reaction of surface functionalization to help experimentally reduce SV defect density by 75%. Beyond the atomic level understanding, theoretical simulations proposed the electronic states hybridization mechanism across the semimetal-MoS2 vdW interface, thereby guiding experimental effort for realizing Ohmic contact at the MoS2-Sb(0112) vdW interface with record-low contact resistance.These advances provide a sound basis with an atomic-level understanding for addressing the related issues. However, there are still notable gaps in terms of system size and time scale of dynamics between atomistic simulations and experimental observations for the studies of MoS2 growth and interfaces. The combination of multiscale simulations and artificial intelligence technology is expected to narrow these gaps and provide a more insightful understanding of the controllable growth and interfacial properties modulation of MoS2. We conclude the Account with the standing challenges and outlook on future research directions from the theoretical perspective.

Study on the Acidic Modification of Mesoporous HZSM-5 Zeolite and Its Catalytic Cracking Performance

Mesoporous HZSM-5 zeolites with nanocrystal stacking morphology were directly synthesized via hydrothermal methods without mesoporous templates. The synthesized mesoporous HZSM-5 was subjected to hydrothermal–citric acid washing treatment. The structural and acidic properties of the samples before and after modification were characterized using various techniques. The catalytic performance for butene conversion to propylene was investigated under atmospheric pressure, 500 °C, and a butene weight hourly space velocity (WHSV) of 10 h−1 in a continuous-flow micro-fixed bed reactor. The results show that propylene selectivity increased significantly from 24.7% before modification to 44%, and propylene yield increased from 22% to 38%. After 2 h of hydrothermal–citric acid washing modification, the catalyst maintained a butene conversion rate of 76% and a selectivity of 47% at 525 °C and a WHSV of 10 h−1 after 130 h of continuous reaction, with a propylene yield of 37%. The results indicate that moderate hydrothermal–citric acid washing modification leads to the removal of aluminum from the zeolite framework, reducing the amount and strength of acid but increasing the mesopore quantity. This helps control the reaction pathways and diffusion of intermediate products, suppresses some side reactions, and improves the selectivity and yield of the desired product, propylene, while significantly enhancing catalytic stability.

A Self-Healing, Flowable, Yet Solid Electrolyte Suppresses Li-Metal Morphological Instabilities.

Lithium metal (Li0) solid-state batteries encounter implementation challenges due to dendrite formation, side reactions, and movement of the electrode-electrolyte interface in cycling. Notably, voids and cracks formed during battery fabrication/operation are hot spots for failure. Here, a self-healing, flowable yet solid electrolyte composed of mobile ceramic crystals embedded in a reconfigurable polymer network is reported. This electrolyte can auto-repair voids and cracks through a two-step self-healing process that occurs at a fast rate of 5.6µm h-1. A dynamical phase diagram is generated, showing the material can switch between liquid and solid forms in response to external strain rates. The flowability of the electrolyte allows it to accommodate the electrode volume change during Li0 stripping. Simultaneously, the electrolyte maintains a solid form with high tensile strength (0.28MPa), facilitating the regulation of mossy Li0 deposition. The chemistries and kinetics are studied by operando synchrotron X-ray and in situ transmission electron microscopy (TEM). Solid-state NMR reveals a dual-phase ion conduction pathway and rapid Li+ diffusion through the stable polymer-ceramic interphase. This designed electrolyte exhibits extended cycling life in Li0-Li0 cells, reaching 12000 h at 0.2mA cm-2 and 5000 h at 0.5mA cm-2. Furthermore, owing to its high critical current density of 9mA cm-2, the Li0-LiNi0.8Mn0.1Co0.1O2 (NMC811) full cell demonstrates stable cycling at 5mA cm-2 for 1100 cycles, retaining 88% of its capacity, even under near-zero stack pressure conditions.

Mechanically Robust Polyimide Binder Realizes Stable and High Electrochemical Performance for Micro-Silicon Anodes in Lithium-Ion Batteries.

Silicon is regarded as a highly promising anode material for lithium-ion batteries, attributed to its substantial theoretical specific capacity. The practical implementation of Si-anodes is hindered by side reactions and significant volumetric changes, ~300% to 400%, occurring during the lithiation/delithiation processes. Pertinent binders can effectively mitigate the stress resulting from the volumetric exchange in Si-anodes. Herein, we developed a mechanically stable polyimide binder PI-CF3 and introduced trifluoromethyl and hydroxyl groups for commercial microparticular Si-anodes. With the highest Young's modulus of ~921.1 MPa, the binder presented the maximum resilience during the charging and discharging of Micro-Si, integrating the morphology, and reducing the degree to which the electrode disrupted ion and electric pathways. Moreover, -OH and -CF3 groups of the binder could potentially interact with the oxide layer at the surface of silicon through H-bonds resulting in a cross-linking network to improve interface stability. The as-prepared PI-CF3 binder with excellent intrinsic mechanical and electro-rich groups stabilizes the electrode structure and facilitates fast Li+ transportation. Consequently, at 0.6 Ag-1, the micro-Si anode produced an initial specific capacity of 1838 mAh g-1 at Si 0.66 mg cm-2. Besides, at Si 0.78 mg cm-2 specific capacity retained around 1219 mAh g-1 over 330 cycles.

In situ Triggered Rich‐LiF/Mg Multifunctional Passivation Layer for Modifying the Anode Interface of All‐Solid‐State Lithium Metal Batteries

AbstractLithium (Li) is a promising anode material for all‐solid‐state Li metal batteries (ASSLMBs) due to its high energy density. However, the interface incompatibility of Li/solid electrolyte and uneven Li deposition induces the penetration of Li dendrites. Herein, a multifunctional rich‐LiF/Mg artificial solid electrolyte interphase (SEI) layer is constructed from a MgF2‐PVDF‐HFP film to passivate the Li anode and achieve effective inhibition of Li dendrites. Notably, the triggered LixMg alloys rivet the Li6PS5Cl (LPSCl) electrolyte and Li anode together well, producing satisfactory interface contact and reducing overpotential. The mechanism of LiF and LixMg alloys to enhance the stability of the Li/LPSCl interface is further elucidated by density functional theory (DFT). Moreover, the synergistic interaction of LiF with high interfacial energy and LixMg alloys with low diffusion barrier promotes uniform deposition of Li during plating/stripping and structural stability. Therefore, the modified Li‐symmetric cell exhibits ultra‐high critical current density (2.0 mA cm−2) and considerable cyclic stability (more than 1000 h at 0.5 mA cm−2). Remarkably, NCM//LPSCl//3% MgF2‐PVDF‐HFP@Li ASSLMBs exhibit considerable long‐term cycle stability (86.9% capacity retention after 100 cycles at 0.2 C). This work highlights the critical role of the intermediate passivating layer in mitigating side reactions and preventing Li penetration.

Enhancing the interface stability of Li/NCM622 batteries by adding 3-trifluoromethyl pyrazole

In this study, 3-trifluoromethylpyrazole (TMPZ) was developed as a multifunctional electrolyte additive to enhance wettability between separator and electrolyte, CEI formation and remove HF to improve the performance of Li/NCM622 batteries by experiment and theoretical calculation. After 200 cycles at 30 °C, the discharge capacity retention of batteries at 1 C with 0.5 wt% TMPZ additive is remarkably enhanced from 68.3 % to 83.2 %. The enhanced electrochemical performance of the batteries by adding TMPZ additive is evaluated by the spectroscopic characterization and theoretical calculation. It is demonstrated that TMPZ can generate uniform and dense CEI film via ring-opening electrochemical polymerization of TMPZ on the NCM622 electrode surface. The CEI film helps to suppress the breakdown of LiPF6 electrolyte and the leaching of transition metals, effectively avoiding harmful side reactions between the NCM622 electrode and the electrolyte. Furthermore, introducing TMPZ can enhance the wettability between separator and electrolyte, therefore providing more channels of Li+ to accelerate reaction kinetics of batteries.

In Situ Formation of Stable Dual-Layer Solid Electrolyte Interphase for Enhanced Stability and Cycle Life in All-Solid-State Lithium Metal Batteries.

All-solid-state lithium metal batteries have emerged as a promising solution to overcoming the energy density and safety challenges associated with conventional lithium-ion batteries. Solid polymer electrolytes, particularly those based on poly(vinylidene fluoride) (PVDF) and dimethylformamide (DMF), demonstrate significant potential. However, interfacial side reactions between residual DMF solvents and lithium metal present substantial challenges. In this study, we investigate the in situ formation of solid electrolyte interphase protective layers to mitigate these side reactions. By incorporating F-rich additives, such as fluoroethylene carbonate and lithium difluorophosphate, we successfully establish a dual-layer inorganic SEI structure characterized by an outer LiF layer and an inner Li2O layer. Consequently, our approach extends the cycle life of lithium symmetric batteries to 3000 h. Additionally, the Li||LiFePO4 solid-state battery demonstrates exceptional stability, enduring 400 cycles at a 1C rate with an impressive capacity retention of 84%. This strategic methodology effectively leverages the benefits of residual solvents, ensuring both enhanced battery efficiency and long-term operational stability for PVDF-based all-solid-state lithium metal batteries.

In‐Situ Constructing a Mixed‐Conductive Interfacial Protective Layer for Ultra‐Stable Lithium Metal Anodes

Lithium metal batteries are the most promising next‐generation energy storage technologies due to their high energy density. However, their practical application is impeded by serious interfacial side reactions and uncontrolled dendrite growth of lithium metal anode. Herein, copper 2,4,5‐trifluorophenylacetate is designed and explored to stabilize lithium metal anode by in‐situ constructing a dense and mixed‐conductive interfacial protective layer. The formed passivated layer not only significantly inhibits interfacial side reactions by avoiding direct contact between lithium metal anode and electrolyte but also effectively suppresses lithium dendrite growth due to the unique inorganic‐rich compositions and mixed‐conductive properties. As a result, the copper 2,4,5‐trifluorophenylacetate‐treated lithium metal anodes show greatly improved cycle stability under both high current density and high areal deposition capacity. Notably, the assembled liquid symmetrical cells with copper 2,4,5‐trifluorophenylacetate‐treated lithium metal anodes can stably work for more than 3000, 5000, and 4800 h at 1.0 mA cm−2–1.0 mAh cm−2, 2.0 mA cm−2–5.0 mAh cm−2, and 10 mA cm−2–5.0 mAh cm−2, respectively. Furthermore, the assembled liquid full cell with a high LiFePO4 loading (~16.9 mg cm−2) shows a significantly enhanced cycle life of 250 cycles with stable Coulombic efficiencies (>99.1%). Moreover, the assembled all‐solid‐state lithium metal battery with a high LiNi0.6Co0.2Mn0.2O2 loading (~5.0 mg cm−2) also exhibits improved cycle stability. These findings underline that the copper 2,4,5‐trifluorophenylacetate‐treated lithium metal anodes show great promise for high‐performance lithium metal batteries.

Enhancing the Reaction Kinetics and Stability of Co-Free Li-Rich Cathode Materials via a Multifunctional Strategy.

Co-free Li-rich layered oxides (CFLLOs) with anionic redox activity are among the most promising cathode materials for high-energy-density and low-cost lithium-ion batteries (LIBs). However, irreversible oxygen release often causes severe structural deterioration, electrolyte decomposition, and the formation of unstable cathode-electrolyte interface (CEI) film with high impedance. Additionally, the elimination of cobalt elements further deteriorates the reaction kinetics, leading to reduced capacity and poor rate performance. Here, a multifunctional strategy is proposed, incorporating Li2MnO3 phase content regulation, micro-nano structure design, and heteroatom substitution. The increased content of Li2MnO3 phase enhances the capacity through oxygen redox. The smaller nanoscale primary particles induce greater tensile strain and introduce more grain boundaries, thereby improving the reaction kinetics and reactivity, while the larger micron-sized secondary particles help to reduce interfacial side reactions. Furthermore, Na⁺ doping modulates the local coordination environment of oxygen, stabilizing both the anion framework and the crystal structure. As a result, the designed cathode exhibits enhanced rate performance, delivering a capacity of 158 mAh g⁻¹ at 5.0 C and improved cyclic stability, with a high capacity retention of 99% after 400 cycles at 1.0 C. This multifunctional strategy holds great promise for advancing the practical application of CFLLOs in next-generation LIBs.