Side Chain Moiety Research Articles

Pharmacology, prevalence in Germany, and analytical data of cyclobutylmethyl- and norbornylmethyl-type synthetic cannabinoid receptor agonists.

Synthetic cannabinoid receptor agonists (SCRAs) are distributed on the drug market to produce THC-like effects while evading routine drug testing and legislation. The cyclobutylmethyl (CBM) and norbornylmethyl (NBM) side chain specifically circumvented the German legislation and led to the emergence of exploratory SCRAs in 2019-2021. The NBM SCRAs were detected post-amendment of the new psychoactive substances act in 2020, which scheduled all CBM SCRAs. All six SCRAs are full agonists at the cannabinoid receptor 1 compared with Δ9 -tetrahydrocannabinol and CP-55,940. The CBM SCRAs showed binding affinities of Ki : 29.4-0.65 nm and potencies of EC50 : 483-40.1nm (CBMICA << CBMINACA < CBMeGaClone). The norbornyl derivatives exhibited high affinities (Ki : 1.87-0.25 nm), with indazole being the most affine. Functional activity data confirmed that the indazole derivative tends to be the most potent of all three NBM SCRAs (EC50 : 169-1.78 nm). The sterically demanding NBM side chain increased the affinity and activity of almost all core structures. Future studies should be conducted on similarly voluminous side chain moieties. The 'life cycle' of all SCRAs on the drug market was less than a year. Notably, Cumyl-CBMICA was the most prevalent while also having the weakest cannabimimetic properties. Quantification of Cumyl-CBMICA during peak consumption in late 2019 and early 2020 revealed an increase in the concentration on the herbal material, which, together with forum entries and blog posts, corroborates the low in vitro cannabimimetic properties. Seizure prevalence data indicate that almost all SCRAs continue to be identified in 2022, potentially due to remaining stocks.

Polymer precursor synthesis of novel ZrC–SiC ultrahigh-temperature ceramics and modulation of their molecular structure

In this study, ZrC–SiC composite ceramics were prepared with varying Zr/Si molar ratios using sol–gel method. Composites were characterized by Fourier-transform infrared spectroscopy (FT–IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Raman spectroscopy, and energy-dispersive X-ray spectroscopy (EDS). FT–IR analysis confirmed macromolecular network structure of composites, in which the precursor is composed of polyvinyl butyral (PVB) as main chain, silane molecules are interlinked via –OH moieties in PVB side chains, and Zr atoms are crosslinked with Si in corresponding proportion. Ceramic precursor begins to decompose at a temperature exceeding 1300 °C and is completely transformed into ZrC–SiC composite ceramics with corresponding Zr/Si molar ratio at 1600 °C. Raman spectroscopy and TEM results reveal that after annealing at 1600 °C, ZrC powder uniformly covers surface of SiC ceramics, and high-crystallinity graphite carbon covers ZrC powder.

Accumulation and ordering of P3HT oligomers at the liquid-vapor interface with implications for thin-film morphology.

The morphology of semiconducting polymer thin films is known to have a profound effect on their opto-electronic properties. Although considerable efforts have been made to control and understand the processes which influence the structures of these systems, it remains largely unclear what physical factors determine the arrangement of polymer chains in spin-cast films. Here, we investigate the role that the liquid-vapor interfaces in chlorobenzene solutions of poly(3-hexylthiophene) [P3HT] play in the conformational geometries adopted by the polymers. Using all-atom molecular dynamics (MD), and supported by toy-model simulations, we demonstrate that, with increasing concentration, P3HT oligomers in solution exhibit a strong propensity for the liquid-vapor interface. Due to the differential solubility of the backbone and side chains of the oligomers, in the vicinity of this interface, hexyl chains and the thiophene rings, have a clear orientational preference with respect to the liquid surface. At high concentrations, we additionally establish a substantial degree of inter-oligomer alignment and thiophene ring stacking near the interface. Our results broadly concur with the limited existing experimental evidence and we suggest that the interfacial structure can act as a template for film structure. We argue that the differences in solvent affinity of the side chain and backbone moieties are the driving force for the anisotropic orientations of the polymers near the interface. This finer grained description contrasts with the usual monolithic characterization of polymer units. Since this phenomenon can be controlled by concurrent chemical design and the choice of solvents, this work establishes a fabrication principle which may be useful to develop more highly functional polymer films.

The binding affinity of human pediatric respiratory syncytial virus Phosphoprotein's C-terminal tail to nucleocapsid can be improved by a rationally designed halogen-bonded system

Human respiratory syncytial virus (hRSV) is a common contagious virus that causes infections of pediatric pneumonia and specifically impacts infants and small children. The hRSV phosphoprotein is a key component of the viral RNA polymerase, which can interact with nucleocapsid and other partners through its C-terminal tail (CTT) to promote the formation of viral transcriptase complex, where the Phe241 is a key anchor residue. Based on the crystal template-modeled complex structure of hRSV nucleocapsid with a peptidic segment derived from the phosphoprotein's CTT, we successfully introduced a rationally designed halogen-bonded system to the complex interface by substituting para (p)-position of the side-chain phenyl moiety of CTT Phe241 residue with a halogen atom X (X = F, Cl, Br or I). The halogen-bonded system consists of a halogen bond (X-bond) between nucleocapsid Ser131 residue and CTT Phe241 residue as well as a hydrogen bond (H-bond) between nucleocapsid Ser131 residue and nucleocapsid Glu128 residue; the X-bond and H-bond share a common hydroxyl group of nucleocapsid Ser131 residue. High-level theoretical calculations suggested that bromine Br is the best choice that can render strong potency for the X-bond and can confer high affinity to the nucleocapsid–CTT binding. Affinity analysis revealed that the p-brominated CTT ([p]bCTT) exhibited 6.3-fold affinity improvement relative to its nonhalogenated counterpart. In contrast, the Br-substitutions at ortho (o)- and meta (m)-positions, which resulted in two negative controls of o-brominated [o]bCTT and m-brominated [m]bCTT, respectively, were unable to form effective X-bond with nucleocapsid according to theoretical investigation and did not improve the binding affinity essentially relative to native CTT.

Quantitative Multistate Binding Model of Silica Nanoparticle-Protein Interactions Obtained from Multinuclear Spin Relaxation.

Nanoparticle-assisted NMR spin relaxation (NASR), which makes internal protein dynamics in solution directly observable on nanosecond to microsecond time scales, has been applied to different nuclei and relaxation processes of the same protein system. A model is presented describing the transient interaction between ubiquitin and anionic silica nanoparticles for the unified interpretation of a wealth of experimental data including 2H, 13C, and 15N relaxation of methyl side chain and backbone moieties. The best model, implemented using a stochastic Liouville equation, describes the exchange process via an intermediary encounter state between free and fully nanoparticle-bound protein. The implication of the three-state binding model on the interpretation of NASR data is discussed.

Structural modeling, energetic analysis and molecular design of a π-stacking system at the complex interface of pediatric respiratory syncytial virus nucleocapsid with the C-terminal peptide of phosphoprotein

Human respiratory syncytial virus (RSV) is a primary cause of lower respiratory tract infections and hospital visits during infancy and childhood. The RSV phosphoprotein (P) is a major polymerase cofactor that interacts with nucleoprotein (N) to promote the recognition of ribonucleoprotein complex (RNP) by viral RNA polymerase. The binding pocket of N protein is chemically diverse, in or around which a number of aromatic and charged amino acid residues are observed. Previously, a nonapeptide segment (P peptide, 233DNDLSLEDF241) representing the C-terminal tail of P protein was identified to mediate the N-P interaction with a moderate affinity, in which the Phe241 at the end of P's C-terminus plays a critical role in the binding of P peptide to N protein. Here, we found that the side-chain aromatic phenyl moiety of P Phe241 residue can form short- and long-range cation-π interactions with N Arg132 and Arg150 residues, respectively, as well as T-shaped and parallel-displaced π-π stackings with N Tyr135 and His151 residues, respectively, which co-define a geometrically satisfactory π-stacking system at the complex interface of N protein with P peptide, thus largely stabilizing the complex architecture. The stacking effect was further optimized by systematically mutating the P Phe241 residue to other natural and non-natural aromatic amino acids with diverse chemical substitutions at the phenyl moiety to examine their structural and energetic effects on π-stacking system and on protein–peptide binding. The electron-donating mutations at the phenyl moiety of P Phe241 residue can effectively enhance the π-stacking system and then promote peptide binding, whereas the bulky and positively charged mutations would considerably impair the peptide potency by introducing steric hindrance and electrostatic repulsion. The [Tyr]P, [Thp]P and [Fph]P mutants were determined to have an increased affinity relative to wild-type P peptide, which could be used as self-inhibitory peptides to competitively disrupt the native interaction between N and P proteins.

Sequential and Simultaneous Photoinduced Radical and Step-Growth Polymerizations of Carbazole Functional Styrene

Photoinduced radical and step-growth polymerizations of carbazole functional styrene (vinyl phenyl carbazole, VPC) by sequential and one-pot strategies have been investigated. The obtained polymers were characterized by FTIR, 1H-NMR, GPC, UV–Vis, PL, CV, and BET analyses. The theoretical charge distribution and HOMO–LUMO calculation by DFT were well-matched with those obtained from optical and electrochemical measurements. In the sequential approach, visible light-induced free-radical photopolymerization of VPC by using bisacyl phosphineoxide results in the formation of linear polymers with side-chain carbazole moieties. The resulting polymers exhibit a smooth surface as a consequence of decreasing crystallinity. As evidenced by TEM analysis, the subsequent photoiniated step-growth polymerization of the carbazole groups by using diphenyliodonium hexafluorophosphate (DPI) yields hyperbranched and cross-linked polymers with the microspheres on the surface. In the one-pot approach, concomitant photoinitiated free-radical and step-growth polymerizations by using DPI results in the formation of cross-linked polymers with dispersed distribution. The total nitrogen uptake of VPC-based polymers by using Brunauer–Emmett–Teller (BET) surface area was found to be between about 150 and 190 m2/g at 77 K.

Synthesis and Biological Evaluation of Water‐Soluble Esterase‐Activated CO‐Releasing Molecules Targeting Mitochondria

Due to the beneficial effects of carbon monoxide as a cell‐protective and anti‐inflammatory agent, CO‐releasing molecules (CORMs) offer some promising potential applications in medicine. In this context, we synthesized a set of acyloxy‐cyclohexadiene‐Fe(CO)3 complexes, all displaying a N‐methyl‐pyridinium triflate moiety in the ester side chain, as mitochondria‐targeting esterase‐triggered CORM prodrugs. Whereas the compounds in which the acyloxy substituent is attached to the 2‐position of the diene‐Fe(CO)3 unit (A series) spontaneously release CO upon dissolution in phosphate buffer, which remarkably is partly suppressed in the presence of porcine liver esterase (PLE), the 1‐substituted isomers (B series) show the expected PLE‐induced release of CO (up to 3 equiv.). The biological activity of Mito‐CORMs 2/3‐B and their isophorone‐derived analogs 2/3‐A’, which also displayed PLE‐induced CO release, was assessed by using human umbilical vein endothelial cells (HUVEC). Whereas Mito‐CORMs 2/3‐B were not cytotoxic up to 500 μM (MTT assay), Mito‐CORMs 2/3‐A’ caused significant toxicity at concentrations above 50 μM. The anti‐inflammatory potential of both Mito‐CORM variants was demonstrated by concentration‐dependent down‐regulation of the pro‐inflammatory markers VCAM‐1, ICAM‐1 and CXCL1 as well as induction of HO‐1 in TNFα‐stimulated human umbilical vein endothelial cells (HUVECs; western blotting and qPCR). Energy phenotyping by seahorse real‐time cell metabolic analysis, revealed opposing shifts of metabolic potentials in cells treated either with Mito‐CORMs 2/3‐B (increased mitochondrial respiration and glycolytic activity) or Mito‐CORMs 2/3‐A’ (suppressed mitochondrial respiration and increased glycolytic activity). Thus, the Mito‐CORMs represent valuable tools for the safe and targeted delivery of CO to mitochondria as a subcellular compartment to induce positive anti‐inflammatory effects with only minor shifts in cellular energy metabolism. Also, due to their water solubility, these compounds provide a promising starting point for further pharmacological studies.

30-norlanostane triterpenoids and steroid derivatives from the endophytic fungus Aspergillus nidulans

Two undescribed 30-norlanostane triterpenoids, named nidulanoids A and B, one ergostane-type steroid with an unusual double bond between C-17 and C-20 designated (17E,22E,24R)-3β,5α-dihydroxyergosta-7,17,22-trien-6,16-dione, and one pregnane, (7Z,9Z,17Z)-,2α,3β-dihydroxypregna-7,9,17 (20)-trien-18-al, along with six known steroids were isolated from the extract of the fungus Aspergillus nidulans. Among them, nidulanosides A and B represents the first example of naturally occurred 30-norlanostane triterpenoids featuring a C9 side-chain moiety at C-17 and a hemiacetal system formed between C-3 and C-19, as an intermediate between lanostane and the regular steriods; the structure of (17E,22E,24R)-3β,5α-dihydroxyergosta-7,17,22-trien-6,16-dione possesses an untypical Δ17,20 double bond; meanwhile, (7Z,9Z,17Z)-,2α,3β-dihydroxypregna-7,9,17 (20)-trien-18-al represents the first example of C-21 steroid with an aldehyde group at C-13. Their structures and absolute stereochemistry were elucidated based on spectroscopic data, electronic circular dichroism (ECD) calculations, and single-crystal X-ray diffraction analysis. (7Z,9Z,17Z)-,2α,3β-dihydroxypregna-7,9,17 (20)-trien-18-al showed moderate inhibitory activities against rat brain cancer (PC12) cell lines, with IC50 value of 7.34 μM. This study enriches the diversified structures of triterpenoids and steroids analogues from A. nidulans and indicated (7Z,9Z,17Z)-,2α,3β-dihydroxypregna-7,9,17(20)-trien-18-al to be a promising lead compound against PC12 cell lines.

Computer-Aided Screening of the Binding Affinities of Some Anti-Diabetic Ligands Obtained from Annona muricata Linn. (Soursop) and their Derivatives against Alpha-glucosidase

BackgroundDelaying glucose absorption into the blood – post-prandial – after food intake can play a major ameliorative role in the lifestyle and economic advantage of diabetic (DM) patients, making type 2 diabetes (T2DM), unlike type 1 (T1DM), considerably more, manageable, curable, and preventable. Identifying plant-based lead compounds that will offer much more precise and potent anti-DM activities, with lesser side effects is beneficial. MethodIn this experiment, virtual investigations were done to study the binding properties of some phytoconstituents of Annona muricata (annonaceous acetogenin and flavonoids) and their analogues, against α-glucosidase, to identify possible variations of binding affinities with changes in side-chain moieties, modification of carbon-skeleton through increased cyclisation, side-chain hydroxylation, steric-distortion of the beta-lactone ring of acetogenins, the effect of the introduction of glycoside side-chain moiety. ResultsThe acetogenins and naringenin analogues, pentahydroxy flavanone (-10.40 Kcal/mole), floro-tetrahydroxyflavan (-10.20 Kcal/mole), tetrahydroxyflavan (-10.00 Kcal/mole), naringenin (-09.40 Kcal/mole), naringenin analogue (-09.20 Kcal/mole), as well as, 15 – acetyl – guanacone – 3 (-9.20 Kcal/mole), recorded relatively high binding energies, suggesting that they bonded better as inhibitors, compared to the other compounds, and the standards, metformin (-4.60 Kcal/mole), except acarbose (-9.70 Kcal/mole). The observed major amino acid residues targeted for bonding by the ligands ranged between Arg422, Asn424, Tyr425, and Arg426. ConclusionIt was, however, observed that the addition of glycoside moiety, increasing the number of hydroxyl groups and rings within the carbon-carbon chain (which ultimately generates constitutional isomers) of α-glucosidase inhibitors could further increase their inhibitory potentials against their binding site.

Sarubicinols A-C, Cytotoxic Benzoxazoles from a Streptomyces.

A chemical investigation of Streptomyces sp. Hu186 afforded two known quinone antibiotics, sarubicin A (1) and sarubicin B (2), together with three unusual variants, sarubicinols A-C (3-5), and two new 1,4-naphthoquinone metabolites, sarubicin B1 (6) and sarubicin B2 (7). Compounds 3-5 possess a rare 2-oxabicyclo [2.2.2] substructure and a benzoxazole ring system. Their structures were elucidated using 1D and 2D nuclear magnetic resonance and high-resolution electrospray ionization mass spectrometry data. The absolute configurations of the side-chain moieties in 4 and 5 were solved by electronic circular dichroism calculations. Compounds 1-7 showed moderate cytotoxic activity against four tumor cell lines.

Loratadine inhibits Staphylococcus aureus virulence and biofilm formation

SummaryThere are no anti-virulence and anti-biofilm treatments for Staphylococcus aureus infection. We found that 25 μM loratadine inhibits S. aureus biofilm formation under static or flow-based conditions. Testing of loratadine effects on 255 clinical S. aureus strains with varying biofilm robustness showed inhibition of biofilm formation in medium and strong, but not weak, biofilm-producing strains. At 25 μM, loratadine reduced pigmentation and hemolysis of the bacteria without affecting growth. Loratadine (5 mg/kg) reduced mortality in S. aureus pulmonary infection model mice and acted synergistically with vancomycin to reduce pulmonary bacterial load and levels of inflammatory cytokines in bronchoalveolar lavage fluid. Loratadine analogues (side-chain carbamate moiety changed) inhibited biofilm formation, pigmentation, and hemolysis of S. aureus. Regarding mechanism, loratadine exposure reduced RNA levels of virulence-related S. aureus genes, and loratadine-induced mutations in MgrA reduced loratadine-MgrA binding. Overexpression of mutated mgrA in wild-type S. aureus decreased the biofilm formation inhibition effect of loratadine.

The effect of side chain engineering on conjugated polymers in organic electrochemical transistors for bioelectronic applications.

Bioelectronics focuses on the establishment of the connection between the ion-driven biosystems and readable electronic signals. Organic electrochemical transistors (OECTs) offer a viable solution for this task. Organic mixed ionic/electronic conductors (OMIECs) rest at the heart of OECTs. The balance between the ionic and electronic conductivities of OMIECs is closely connected to the OECT device performance. While modification of the OMIECs’ electronic properties is largely related to the development of conjugated scaffolds, properties such as ion permeability, solubility, flexibility, morphology, and sensitivity can be altered by side chain moieties. In this review, we uncover the influence of side chain molecular design on the properties and performance of OECTs. We summarise current understanding of OECT performance and focus specifically on the knowledge of ionic–electronic coupling, shedding light on the significance of side chain development of OMIECs. We show how the versatile synthetic toolbox of side chains can be successfully employed to tune OECT parameters via controlling the material properties. As the field continues to mature, more detailed investigations into the crucial role side chain engineering plays on the resultant OMIEC properties will allow for side chain alternatives to be developed and will ultimately lead to further enhancements within the field of OECT channel materials.

Amino Acid Nanofibers Improve Glycemia and Confer Cognitive Therapeutic Efficacy to Bound Insulin.

Diabetes poses a high risk for debilitating complications in neural tissues, regulating glucose uptake through insulin-dependent and predominantly insulin-independent pathways. Supramolecular nanostructures provide a flexible strategy for combinatorial regulation of glycemia. Here, we compare the effects of free insulin to insulin bound to positively charged nanofibers comprised of self-assembling amino acid compounds (AACs) with an antioxidant-modified side chain moiety (AAC2) in both in vitro and in vivo models of type 1 diabetes. Free AAC2, free human insulin (hINS) and AAC2-bound-human insulin (AAC2-hINS) were tested in streptozotocin (STZ)-induced mouse model of type 1 diabetes. AAC2-hINS acted as a complex and exhibited different properties compared to free AAC2 or hINS. Mice treated with the AAC2-hINS complex were devoid of hypoglycemic episodes, had improved levels of insulin in circulation and in the brain, and increased expression of neurotransmitter taurine transporter, Slc6a6. Consequently, treatment with AAC2-hINS markedly advanced both physical and cognitive performance in mice with STZ-induced and genetic type 1 diabetes compared to treatments with free AAC2 or hINS. This study demonstrates that the flexible nanofiber AAC2 can serve as a therapeutic platform for the combinatorial treatment of diabetes and its complications.

Concise Synthesis of the Terpene Core Structure of Suaveolindole through a Time-Economic Route

AbstractThe terpene core structure of suaveolindoles was synthesized through a concise route in a time-economical manner. A scalable synthetic route from pulegone delivered the desired α,β,γ,δ-unsaturated ester in a brief period. By way of Eschenmoser–Claisen rearrangement, carbon side-chain moiety at the crowded double-allylic position was introduced stereoselectively.

Detection of SARS-CoV-2 in COVID-19 Patient Nasal Swab Samples Using Signal Processing.

This work presents an opto-electrical method that measures the viral nucleocapsid protein and anti-N antibody interactions to differentiate between SARS-CoV-2 negative and positive nasal swab samples. Upon light exposure of the patient nasal swab sample mixed with the anti-N antibody, charge transfer (CT) transitions within the altered protein folds are initiated between the charged amino acids side chain moieties and the peptide backbone that play the role of donor and acceptor groups. A Figure of Merit (FOM) was introduced to correlate the relative variations of the samples with and without antibody at two different voltages. Empirically, SARS-CoV-2 in patient nasal swab samples was detected within two minutes, if an extracted FOM threshold of >1 was achieved; otherwise, the sample wasconsidered negative.

The Synthesis and Biological Evaluation of D-Ring-Modified Vitamin D Analogues.

The vitamin D3 structure consists of the A-ring, a linker originating from the B-ring, C-ring, D-ring, and side-chain moieties. Each unit has its unique role in expressing the biological activities of vitamin D3. Many efforts have been made to date to assess the possible clinical use of vitamin D. Some organic chemists focused on the D-ring structure of vitamin D and synthesized D-ring-modified vitamin D analogues, and their biological activities were studied. This review summarizes the synthetic methodologies of D-ring-modified vitamin D analogues, except for seco-D, and their preliminary biological profiles.

Rational design of surface-confined nanostructured self-assemblies based on functional comb-shaped copolymers for tunable molecular orientation

Functional ultrathin nanoarchitectures are commonly based on hierarchical molecular self-assemblies that are structurally tunable and facilely fabricable, and have found a broad range of potential applications from nanoelectronics to biosensors. Here, we demonstrate a simple and elegant approach for the rational design of ultrathin molecular nanoarchitectures for tunable interfacial orientation of liquid crystals (LCs) using the surface-confinement of functional amphiphilic copolymers. The surface-confined nanostructured self-assemblies are simply prepared by introducing common functional polymers into amphiphilic systems. The surface-confined copolymeric nanoalignment layer, which is constructed from the simple doping and molecular self-assembly of comb-shaped amphiphilic copolymers in a confined LC medium, comprises a hydrophobic polyacrylate segment with a long side chain moiety capable of uniformly controlling the LC alignment and a hydrophilic polyacrylic acid segment with a carboxylic acid group confined to the hydrophilic surface of indium tin oxide substrate. The combination of structural variations on amphiphilic copolymer system and tunability of molecular orientation makes the surface-confined copolymeric nano-assemblies highly attractive ultrathin nanoarchitectures. The resulting nanostructured self-assemblies exhibit a spontaneous and uniform vertical orientation of LC molecules, simultaneously providing the LC device with a superfast electro-optical switching time and a strong surface anchoring control.

The G132S Mutation Enhances the Resistance of Mycobacterium tuberculosis β-Lactamase against Sulbactam.

The current rise of antibiotic resistant forms of Mycobacterium tuberculosis is a global health threat that calls for new antibiotics. The β-lactamase BlaC of this pathogen prevents the use of β-lactam antibiotics, except in combination with a β-lactamase inhibitor. To understand if exposure to such inhibitors can easily result in resistance, a BlaC evolution experiment was performed, studying the evolutionary adaptability against the inhibitor sulbactam. Several amino acid substitutions in BlaC were shown to confer reduced sensitivity to sulbactam. The G132S mutation causes a reduction in the rate of nitrocefin and ampicillin hydrolysis and simultaneously reduces the sensitivity for sulbactam inhibition. Introduction of the side chain moiety of Ser132 causes the 104–105 peptide bond to assume the cis conformation and the side chain of Ser104 to be rotated toward the sulbactam adduct with which it forms a hydrogen bond not present in the wild-type enzyme. The gatekeeper residue Ile105 also moves. These changes in the entrance of the active site can explain the decreased affinity of G132S BlaC for both substrates and sulbactam. Our results show that BlaC can easily acquire a reduced sensitivity for sulbactam, with a single-amino acid mutation, which could hinder the use of combination therapies.

Stereochemistries and Biological Properties of Oligomycin A Diels-Alder Adducts.

Oligomycin A is a potent antibiotic and antitumor agent. However, its applications are restricted by its high toxicity and low bioavailability. In this study, we obtained Oligomycin A Diels-Alder adducts with benzoquinone and N-benzylmaleimide and determined their absolute configurations by combining 1H and ROESY NMR data with molecular mechanics conformational analysis and quantum chemical reaction modeling. The latter showed that adduct stereochemistry is controlled by hydrogen bonding of the Oligomycin A side-chain isopropanol moiety with the carbonyl group of the dienophile. Biological studies showed that the Diels-Alder modification of the Oligomycin A diene system resulted in a complex antiproliferative potential pattern. The synthesized adducts were determined to be more active against the triple-negative (ERα, PR, and HER2 negative) breast cancer cell line MDA-MB-231 and lung carcinoma cell line A-549 compared to Oligomycin A. Meanwhile, Oligomycin A was more potent against myeloid leukemia cell line K-562 and breast carcinoma cell line MCF-7 than its derivatives. Thus, modification of the diene moiety of Oligomycin A is a promising strategy for developing novel antitumor agents based on its scaffold.