Short Wavelength Research Articles

Ultramarine blue containing paint layers: Further study of the photo-catalytic degradation of binding media

Photo-catalytic degradation of a linseed oil binder by natural ultramarine (Lapis Lazuli or Lazurite) and Sodalite in paint layers was studied. Both pigments degrade the binder under xenon arc exposure, leading to erosion of the binder at the surface, increased roughness, light scattering and desaturation of the color. Both pigments behave similarly to synthetic ultramarine blue studied earlier. The results for Sodalite provide further proof that the zeolitic nature of the aluminosilicate cage causes the catalytic degradation and that the enclathrated polysulfur radical anions S2-. and S3-. trapped inside the cage are not responsible for the catalytic action. Relatively stable synthetic binders are less affected by the presence of synthetic ultramarine blue. The paints were aged in a xenon arc apparatus using a simulated indoor environment (radiation > ca. 320 nm). The samples were analyzed using diffuse reflectance spectroscopy in the UV–vis and short wavelength infrared (SWIR) ranges, Raman spectroscopy, field-emission gun scanning electron microscopy (FEG-SEM) and FTIR.

Optimization of TiO2-based UV-LED Photocatalytic System for Mixed Dyes and Pharmaceutical Contaminants

To optimize the working efficiency of the novel UV-LED system based on TiO2 photocatalyst, the influence mechanism of LED lamp arrangement, light source wavelength and working voltage on photocatalytic efficiency was investigated. Acid red 26 (AR 26), acetaminophen (ACT) and diclofenac (DCF) were used as contaminant targets of the photocatalytic system. LED lamp arrangement had almost no effect on the degradation of AR26. However, the degradation efficiency of ACT and DCF was improved under a higher light uniformity. The ACT concentration and DCF concentration at 360 min decreased by 14% and 15%, respectively, with increasing light distribution from 45% to 66.5%. The main reason for this discrepancy in effect was whether the rate-determining step of the degradation mechanism was affected by the light uniformity. The short wavelength and high working voltage of LEDs were conducive to the photocatalytic degradation of contaminants to a different degree. When the wavelength was reduced from 405nm to 365nm, the conversion of AR26, ACT, and DCF increased by 77%, 227%, and 106%, respectively. The conversion rates of AR26, ACT, and DCF increased by 28%, 54%, and 32%, respectively, with voltage increasing from 3 V to 4 V. The data of this work will provide support for optimizing the working efficiency of UV-LED systems based on TiO2 photocatalysts. Copyright © 2024 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

The advantages of employing i-a-SiOX:H as a buffer layer in hydrogenated amorphous silicon oxide solar cells

Abstract This study focuses on a p-i-n single junction solar cell made of hydrogenated amorphous silicon oxide (a-SiOx:H), aiming to enhance solar cell efficiency by mitigating the impact of discontinuities and mismatches occurring at the i/p defect-rich interface between the window layer and the absorber layer. To address this concern, the impact of adding a thin i-a-SiOx:H buffer layer between the p-a-SiOx:H window layer and the i-a-SiOx:H active layer was investigated through numerical modeling using the AMPS-1D (Analysis of Micro-electronic and Photonic Structures) computer program. Implementing these changes led to a remarkable increase in conversion efficiency, rising from 5.714% to an impressive 8.929%. The increase in short-circuit current (JSC), however, is due to improved quantum efficiency at short wavelengths between 350 and 550 nm. Furthermore, enhancing the built-in potential (Vbi) at the i/p interface, combined with the buffer layer’s appropriate band gap energy, increases VOC (open-circuit voltage) from 850 to 993 mV. The substantial improvement in the fill factor (FF) from 63.1 to 83.1% can be largely attributed to the smoothed band offset, primarily facilitated by the presence of the buffer layer at the p/i interface, which led to more efficient extraction of photogenerated holes. To ensure effective usage of the buffer layer, the thickness of a-SiOx:H (buffer layer) varied between 3 nm and 9 nm, while the p-type doping concentration of the same layer was adjusted between 0 and 1020 cm−3. In summary, adding a 3 nm thick a-SiOx:H buffer layer with an intermediate band gap and with a p-type doping concentration (NA) below 1018 cm−3 at the i/p interface improves the electrical and optical properties of the p-i-n solar cells (EFF = 8.951%; VOC = 0.994 V; FF = 83.1%; JSC = 10.842 mA.cm−2).

The role of losses in determining hyperbolic material figures of merit

Uniaxial materials have achieved new prominence in photonics because they can have hyperbolic spectral regions with metallic (ε<0) and dielectric (ε>0) permittivities along different crystal axes. In the lossless case, this results in an open hyperboloid dispersion relation, allowing materials to support highly confined modes with extremely large wavevectors. However, even small losses change the character of the hyperbolic dispersion from open hyperboloids to closed surfaces with finite maximum k, significantly limiting the extent to which highly-confined modes can be achieved. Here, we derive a simple analytic formula for the dispersion relation in the presence of loss and show that for some typical materials the maximum wavevector in hyperbolic materials is roughly ten times the free-space. The scaling of the maximum wavevector is derived, and it is shown that there is a universal scaling relation between the propagation length and the wavelength, which implies that the shortest wavelengths in any hyperbolic material are strongly attenuated.

Using optical absorption to reduce cross-talk in spatially multiplexed waveguiding metasurfaces

Dual-wavelength metasurfaces often employ spatial multiplexing design concepts where two interleaved lattices of meta-atoms, each designed for a specific wavelength, occupy the same layer. However, this arrangement incurs efficiency losses as each wavelength inevitably “sees” unintended meta-atoms designed for the other wavelength, causing spurious interference (crosstalk) effects, which are especially affecting the shorter wavelength. In this paper, we numerically demonstrate that the crosstalk can be reduced by introducing some optical absorption at the shorter wavelength, unveiling the near-field mechanisms at play. Then, through designing and simulating a dual-wavelength beam-steering metasurface, we demonstrate the benefits of certain level of absorption in terms of wavefront purity (characterized by the diffraction efficiency into a desired blazed order) and beam-steering efficiency. This method also presents some advantages in its simplicity as it allows to use the traditional phase-mapping approach based on the simulations of two independent meta-atom libraries, compared to more complex methods that require accounting for the crosstalk between meta-atoms.

Synthesis and Characterization of ZnO Nanoparticles by Pulsed Laser Ablation in Liquid Using Different Wavelengths for Antibacterial Application

In this paper, the synthesis of colloidal solution of ZnO nanoparticles by PLAL using an Nd: YAG laser with 1064 nm and 532 nm wavelengths is described. The optical, morphological, structural, wettability and antibacterial activities were studied. The XRD analysis showed the hexagonal wurtzite structure while the UV-vis indicated the blue shift of the absorption peak due to the surface plasmon of the nanoparticle, which showed significant changes in color behavior. The FE-SEM revealed a uniformed spherical shape with a partial size range of 20.50–21.48 nm for ZnO at 1064 and 57.08–59.87 nm for ZnO at 532nm. Also, the concentration measurement indicated that the concentration of ZnO prepared at 1064 nm is 26.7 μg ml-1 and 63 μg ml-1 at 532 nm due to the relevance of high energy to the Zn plate and little distortion in the water and high absorption of short wavelength. Finally, the optical density of the antibacterial activity has been investigated, and both concentrations have good antibacterial activity at 12 h. The ZnO prepared at 532 nm has higher antibacterial activity because it has a high concentration of nanoparticles for both S. aureus and E. coli. Finally, the cell viability for ZnO synthesis with both 1064 nm and 532 nm indicates that this material has high biocompatibility and could be used for medical applications.

Two‐Photon Clusteroluminescence Enabled by Through‐Space Conjugation for In Vivo Bioimaging

AbstractClusteroluminescence (CL) materials without largely conjugated structures have gained significant attention due to their unique photophysical properties and potential in bioimaging. However, low luminescence efficiency and short emission wavelength limit their development. This work designs three luminogens with CL properties (CLgens) by introducing n‐electron‐involved through‐space conjugation (TSC) into diarylmethane. Apart from single‐photon excited long‐wavelength (686 nm) and high‐efficiency (29 %) CL, two‐photon clusteroluminescence (TPCL) is successfully achieved in such small luminogens with only two isolated heteroatomic units. TSC stabilized in the aggregate state has been proven to realize efficient spatial electron delocalization similar to conventionally conjugated compounds. Encouraged by the excellent TPCL properties, two‐photon imaging of blood vessels in vivo and biocompatibility verification utilizing CLgens are also achieved. This work illustrates the essential role of TSC in promoting nonlinear optical properties of CLgens and may facilitate further design and development of the next generation of bioprobes with excellent biocompatibility.

Optical and electrical degradation behavior of GaN-based UV-A laser diodes

The degradation mechanism of GaN-based ultraviolet (UV-A) laser diodes (LDs) is analyzed by studying the changes of their electrical and optical properties after aging process with the operation current below the threshold current (Ith). After aging treatment, Ith increases, the slope efficiency decreases, and the leakage current increases. In particular, the emission spectra of aged LD show significant broadening, with additional peaks on the shorter wavelength side. Both cathodoluminescence and deep level transient spectrum results indicate defects can develop around the active region of the LD, even when the operation current is below Ith. This leads to an increase in trap-assisted tunneling current and non-radiative recombination. The observed defects may result from the diffusion of water molecule in the environment from the cavity facet into the active region and formation of ON–CN and VGaON complex defects. These defects not only reduce the effective carrier concentration injected into the quantum well but also increase non-radiative recombination. These results will contribute to our understanding of the degradation mechanism of UV LDs and the preparation of long lifetime UV LDs.

A 326 nm pure ultraviolet light sources achieved in a Ga[formula omitted]O[formula omitted] microwire heterojunction through interface optimization and surface-modification

Low-dimensional Ga2O3 single-crystals have caused widespread attentions in the potential of developing ultraviolet light sources due to its ultrabroad bandgap, low-budget, high thermally stable, high breakdown voltage and others. Herein, we exhibit a significant route to construct one-dimensional Ga2O3 microwire heterojunction deep-ultraviolet light-emitting diode (LED). The resulting electroluminescence is positioned at 326 nm with a narrow linewidth of about 22.5 nm, which is the shortest wavelengths once published for the Ga2O3-related light sources. In the well-fabricated LED, an intermediate AlN layer enables appropriately to manipulate band alignment of n-Ga2O3/p-GaN heterojunction, thus achieving efficient confinement of electron–holes spreading and radiative recombination within the Ga2O3 microwire active medium. Benefited from surface-modified Pt nanoparticles, the LED’s electroluminescence efficiency and brightness can be plasmonically boosted. More importantly, the peak energy at 3.8 eV obtained under forward bias, which is smaller than the Ga2O3 bandgap, could be resulted from radiative recombination of weakly-bounded electron–holes inside the Ga2O3 microwires. Therefore, the Ga2O3 monocrystalline wires synthesized using high-temperature carbothermal reduction, are expected as promising-looking candidates to develop environmentally friendly, easy miniaturization, highly-stable deep-ultraviolet light sources and photonic devices.

Vision at high latitudes: High sensitivity without specific boreal adaptations in photoreception in reindeer (Rangifer tarandus L.)

Abstract The light climate at high latitudes, in particular the extended twilight of winter and the reduced diel variation in light level in midsummer and midwinter, potentially constrains visual function and the synchronisation of temporal organisation in polar species. In this paper, we describe the temporal pattern and variation in the spectral composition and brightness of skylight (daylight, twilight, moonlight, starlight, airglow and aurorae) at high latitudes and review photoreception of reindeer/caribou (Rangifer tarandus; ‘Rangifer’) which is one of the few polar resident species for which data are available. Experimental data indicate that the rods of Rangifer may be stimulated by levels of ambient light lower than those occurring during astronomical twilight (solar angle &lt;−18°). Several features of the eyes of Rangifer contribute to their visual capability under extended twilight. These include transmission of UV through the optical media, which enables the animals to exploit the shorter wavelengths characteristic of twilight, and a shift in the peak spectral reflectance of the tapetum lucidum (TL) from around 640 nm in summer to around 450 nm in winter, which increases retinal illumination at short wavelengths. Enhanced sensitivity to short wavelengths is likely to enhance the contrast of some objects and hence the ability of Rangifer to discriminate forage plants and to detect other animals (conspecifics or predators) against a snowy background under low illuminance. There is, nevertheless, currently no evidence of any specific boreal adaptation in their visual system: (i) The eyes of Rangifer, and by inference the area of the dilated pupil, are no larger than expected based on the allometry of eye size in ruminants. (ii) There is no evidence of a change in the spectral sensitivity of photoreceptors associated with detection of UVa. (iii) Transmission of UV through the anterior eye is not unique to Rangifer. (iv) The blue shift in the reflectance of the winter TL appears to be a passive response to prolonged dilation of the pupil and there is no a priori reason not to predict the same response in other large ungulates exposed to low light levels. (v) There is no conclusive evidence of a seasonal shift in absolute retinal sensitivity in Rangifer. (vi) Weak circadian organisation in Rangifer has tentatively been linked to mutations within the circadian molecular clockwork but it remains unclear to what extent this represents a specific adaptation to high latitude. Read the free Plain Language Summary for this article on the Journal blog.

Novel 2D/3D Heterojunction for UV Light‐Emitting Diodes Using Hexagonal Boron Nitride as Hole Injection Layer

The AlGaN materials system has been extensively studied in order to improve the efficiency of UV‐B and UV‐C light‐emitting diodes (LEDs). While progress has been made, significant challenges remain at shorter wavelengths. Most notably, increased Al composition for shorter‐wavelength operation results in increased activation energy of Mg dopants, resulting in low p‐doping. Although p‐doped h‐BN, with a bandgap of 5.9 eV, has been proposed as a potential replacement of p‐doped AlGaN, there have not been demonstrations of LEDs fabricated from p‐doped h‐BN/AlGaN heterostructures. Such unique heterostructures combine 2D p‐doped h‐BN materials with 3D AlGaN materials. Herein, fabrication and characterization of p‐doped h‐BN/AlGaN multiple quantum wells (MQWs)/n‐AlGaN LEDs, demonstrating emission of light at 290 nm corresponding to the AlGaN MQWs, with weaker emission at 262 nm corresponding to the AlGaN barrier, are reported. These results conclusively show hole injection through p‐doped h‐BN into AlGaN and provide a proof of concept that p‐doped h‐BN can be an alternative hole injection layer for UV LEDs.

High performance Au/mix-phase MgZnO/Ga-doped ZnO/In heterojunction solar-blind UV detector with small work voltage

High performance UVC (220 nm–280 nm) detectors with low work voltage is key problem in wide application of UVC optoelectronic device. Here, Au/MgZnO/Ga-doped ZnO/In heterojunction detector is made with both high UVC sensitivity mix-phase MgZnO and high carrier density Ga-doped ZnO conductive layers. The heterostructure detector possess relative high response(0.36A/W)at 254 nm deep UV light without bias voltage. The avalanche breakdown phenomenon within the heterojunction detector, introduced high deep UV response (1390.3 A/W at 3.3 μW/cm2 230 nm) of the Au/MgZnO/Ga-doped ZnO/In heterojunction detector under 5 V bias voltage. The high response of Au/MgZnO/Ga-doped ZnO/In heterojunction detector under low work voltage, is not only much higher than MSM structure MgZnO detector under bias voltage over 25 V, but also higher than reported deep UV detector under small bias voltage. In addition, because of different internal breakdown mechanism, the peak response position of the Au/MgZnO/Ga-doped ZnO/In heterojunction detector is located at shorter wavelength position compared with MSM structure MgZnO detector. Therefore, Au/MgZnO/Ga-doped ZnO/In heterojunction detector is an ideal device structure in low voltage driven detector with relative high response at short wavelength UV light.

Visualization of Mitochondrial DNA G-Quadruplexes with Isaindigotone Derived Near-Infrared Fluorogenic Probe.

Mitochondrial DNA G-quadruplexes (mtDNA G4s) play potential regulatory roles in mitochondrial functions. Fluorescent probes for imaging mtDNA G4s may provide useful information to unveil their regulating dynamics and functions. However, the existing probes for mtDNA G4s still exhibit short absorption and emission wavelengths and limited sensitivity. Here, we develop a new isaindigotone-derived near-infrared (NIR) fluorogenic probe for imaging mtDNA G4s in live cells and in vivo. Different fluorescent probes are engineered by conjugating the isaindigotone scaffold with varying electron-donating groups. It is shown that the probe ISAP using dimethylaminophenyl as the electron-donating group exhibits near-infrared absorption/emission and a high fluorescence activation fold in response to G4s. Molecular docking simulations reveal that ISAP binds to c-Myc G4 via multiple π-π stacking and hydrogen-bond interaction. Cellular studies show that ISAP exhibits an excellent mitochondrial targeting ability and allows specific imaging of mtDNA G4s. We further employed ISAP to image the dynamics of mtDNA G4s under glycolysis and oxidative stresses in live cells. Its capability to mtDNA G4s in vivo is showcased using a tumor-bearing mice model. This probe may serve as a useful tool to image mtDNA G4s and interrogate their biological roles in living systems.

Fullerene‐Free p–i–n Perovskite Solar Cells: Direct Deposition of Tin Oxide on Perovskite Layer Using Ligand Bridges

AbstractIn p–i–n perovskite solar cells (PSCs), fullerene derivatives are predominantly used as an electron transport material (ETM) despite their disadvantages, such as parasitic absorption in the short wavelength range and high cost. State‐of‐the‐art n‐i‐p PSCs are fabricated using SnO2 as the ETM due to their high charge transfer ability, transparency, and low cost. However, in p–i–n PSCs, dispersing SnO2 nanoparticles in a solvent that does not damage the perovskite and forming a uniform layer is challenging. Herein, a strategy of directly depositing SnO2 quantum dots (QDs) on perovskite using ethylenediamine (EDA) for high‐performance applications is reported, which involves a SnO2 QD solution designed with a damage‐free cosolvent. Treating the SnO2 QD layer with the EDA strategy creates a conformal SnO2 QD layer and improves charge transport. This strategy achieves a high power conversion efficiency (PCE) of 18.9% in PSCs with a 1.77 eV bandgap, which is the highest PCE reported for wide bandgap p–i–n PSCs using an inorganic ETM. The top SnO2 layer enables ITO deposition without sputtering damage and achieves a bifacial factor of 99% due to the high transmittance of SnO2 QD. The resulting four‐terminal all‐perovskite tandem exhibited a PCE of 27.0%.

A convolutional neural network to optimize multi-mission satellite altimeter fusion for improving the marine gravity field

Satellite altimetry is the main tool for constructing global or regional marine gravity fields. To improve the accuracy and spatial resolution, it is necessary to fuse multi-mission altimeters. How to determine the weights of multi-mission altimeters is a crucial issue, making the conventional calculation process very complex. In addition, traditional satellite inversion methods are often independent of shipborne gravity, which is used only as validation data, thus not take full advantages of high accuracy and resolution of shipborne gravity. In this study, we introduce a convolutional neural network (CNN) to merge the vertical deflections (DOVs) obtained from multi-altimeter missions to construct a marine gravity model in the South China Sea. High-accuracy shipborne gravity and a dataset comprising DOVs and geo-locations are employed as input data for neural network training. For the validation of CNN method, the gravity model is also computed by conventional Inverse Vening Meinesz (IVM) method. Independent shipborne gravity measurements and SIO V32.1, DTU17 models are used as validation data. The evaluation results show that the CNN-derived model achieves a higher level of accuracy, yielding a standard deviation (STD) of 3.21 mGal, with an improvement of 36.56% compared to IVM-derived model. More than 92% of the differences between the CNN-derived model and shipborne gravity are less than 5 mGal. In addition, spectral analysis results further show that the CNN-derived model has stronger energy at short wavelengths (less than 25 km) compared to other models. These findings reveal that CNN method is feasible for marine gravity recovery and the CNN-derived model can achieve higher accuracy. The CNN method can improve the accuracy and spectral characteristics of the constructed gravity model by taking advantage of the high accuracy and high resolution of shipborne gravity.Graphical

Molecularly and Structurally Designed Polyimide Nanofiber Radiative Cooling Films for Spacecraft Thermal Management

AbstractRadiative cooling films (RCFs) are crucial for spacecraft thermal management, but their optical performance is currently limited by their structures and intrinsic high absorption at short wavelengths. In this study, a novel RCF using electrospun polyimide nanofibers optimized at both the molecular and microscale levels is developed. The newly designed polyimide molecules significantly decrease visible and ultraviolet (UV) light absorption while maintaining excellent thermal radiation properties in the infrared spectrum. By optimizing the diameter and orientation of the nanofibers using Monte Carlo simulations, the resulting film achieves a solar reflectivity of 99.6% and a mid‐infrared emissivity of 0.93. Its physical structures and optical properties remain stable under exposure to UV light, atomic oxygen, and extreme temperature changes. Further vacuum radiative cooling tests reveal that the thermal equilibrium temperature of this film is approximately 28 °C lower than that of Kapton‐based RCFs currently used in spacecraft. These results provide a new approach for creating efficient thermal management materials for space applications, with potential for broader use in architecture, electronic devices, and outdoor equipment.

Dual-wavelength transmission based on liquid crystal tunable filter with high signal-to-noise ratio

Aiming at the problem of limited transmission energy of liquid crystal tunable filter (LCTF), a dual-wavelength transmission system with high signal-to-noise ratio (SNR) is proposed in this paper. The proposed transmission factor Qp is the main influence on the number and location of transmission wavelengths as well as the bandwidth of each transmission wavelength for dual-wavelength systems. Dual-wavelength LCTF can improve the effective transmission energy of the system by increasing the number of filtering channels, and the transmission energy can be increased by about 1.8 times and 70% at short and long wavelengths, respectively, which improves the signal-to-noise ratio (SNR) of the system. Moreover, the dual-wavelength LCTF system is even possible to increase the transmission energy by about 7% at a 33% increase in spectral resolution. Therefore, the dual-wavelength LCTF transmission method not only can improve the SNR of target detection with dual-wavelength response features, but also can effectively solve the problem of contradiction between spectral resolution and spectral transmission energy.

Effects of dim-evening lighting optimised for geographical orientation versus standard lighting on mental health: protocol paper for a quasiexperimental study in a psychiatric hospital

IntroductionResearch has provided novel insights into how light stimulates circadian rhythms through specialised retinal ganglion cells to the suprachiasmatic nucleus. In addition, there has been a revolution in light-emitting diode...

Natural AIEgens as Ultraviolet Sunscreens and Photosynergists for Solar Fuel Production.

Bio-nano hybrids (BNH), combining semiconductors and microorganisms, have shown great promise for effective solar-to-fuel energy conversion. However, the high-energy ultraviolet (UV) photons in the solar spectrum can cause severe photocorrosion of semiconductors and irreversible photodamage to microorganisms within BNH. Here, we developed an encapsulation strategy using natural luminogens with aggregation-induced emission characteristics (AIEgens) to construct a protective layer for BNH, effectively shielding them against high-energy UV photons. We incorporated natural berberine (BBR) into the BNH composed of Methanosarcina barkeri and polymeric carbon nitrides (CNx). The self-assembled BNH-BBR system displayed a 2.75-fold higher CH4 yield than BNH under simulated solar irradiation. Mechanism analysis revealed that BBR acted as a UV sunscreen for BNH by converting high-energy short wavelengths into low-energy long wavelengths, thereby reducing the accumulation of reactive oxygen species and alleviating the photocorrosion of CNx. Furthermore, BBR functioned as a photosynergist for BNH by regulating photoelectron production and utilization, enhancing the intracellular energy formation in M. barkeri for growth and metabolism. This work provides important insights into the effective and scalable conversion of CO2 into valuable biofuels with BNH under light illumination containing high-energy photons.

Resonance Enhancement of the Faraday Effect in a agnetoplasmonic Composite

The paper presents the results of a theoretical and experimental study of the enhancement of the magneto-optical Faraday effect in a magnetoplasmonic nanocomposite, caused by localized plasmon resonance (LPR) in metal nanoparticles. The nanocomposite comprises a three-layer structure of self-assembled gold nanoparticles in a bismuth-substituted iron-garnet matrix. It is shown theoretically and experimentally that the enhancement of the magneto-optical Faraday effect is determined by the action of a magnetic field on the magnetoplasmonic composite as an effective medium as a whole. In this case, in the magnetoplasmonic nanocomposite, the Faraday effect is enhanced at the LPR wavelengths and is slightly weakened in the region of short wavelengths relative to the LPR. It is theoretically shown that the complex gyration index in the off-diagonal terms of the effective permittivity tensor for the magnetoplasmonic composite, in addition to rotation of the polarization plane, leads to the appearance of alternating ellipticity in the vicinity of the plasmon resonance, which is observed in the form of asymmetry of magneto-optical rotation.