Short Reaction Times Research Articles

Silica-based pyrrolidinium ionic liquid immobilised on copper-citric acid metal-organic framework, ([PyrrSi][Cl]@Cu-Cit-MOF): Heterogeneous catalysis to the multicomponent reaction for the synthesis of imidazoles

A novel, silica-based pyrrolidinium ionic liquid immobilised on copper-citric acid metal-organic framework ([PyrrSi][Cl]@Cu-Cit-MOF), has been synthesised through an easy-to-handle procedure and is characterised by several techniques such as Fourier transform infrared (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), powder X-ray diffraction (PXRD), thermal gravimetric (TG), and Brunauer-Emmett-Teller (BET) analyses. The present protocol is scalable and compatible with a wide range of aldehydes, producing imidazole derivatives in excellent yields (82-96 %) in very short reaction times (10–18 min). Moreover, the catalyst could be recovered and recycled simply by filtration and is reusable for up to six consecutive runs without any significant changes in its catalytic activity.

Ultrasound-Assisted Catalyst-free Synthesis of α,β -Unsaturated Amino Acid Esters and Unsaturated Amino Ketones

Introduction: Sonication has been introduced as a green and effective activation method for the selective monoamination of β-dicarbonyl compounds. The simple one-pot process resulted in different substituted β-amino-ɑ,β-unsaturated esters and ketones at room temperature with quantitative yields. Aqueous NH4OH was used as a safe and economical nitrogen source for pressurized NH3 gas. The process is considered green, accounting for not using any solvents and catalysts, besides some aqueous NH4OH-involved reactions using nontoxic water. A broad variety of useful synthetic intermediates, β- amino-ɑ,β-unsaturated esters and ketones have been prepared in short reaction time. Methods: Using this developed protocol, we were able to synthesize a series of structurally diverse β- amino-ɑ,β-unsaturated esters and unsaturated amino ketones. Results: The synthesis of target compounds was achieved in a truly green process with high atom economy and excellent yields in a catalyst-free one-pot system in an aqueous medium using simple, commercially available, inexpensive ammonium hydroxide as the source of the nitrogen. The high atom economy has been accompanied by the formation of a small amount of nontoxic waste, water. Conclusion: In conclusion, a simple, convenient, and high-yielding catalyst-free environmentally benign method was developed for the synthesis of unsaturated amino acid esters and unsaturated amino ketones.

Synthesis of Polysubstituted Pyridines via Nitrogen-doped Graphene Catalyzed One-Pot Multicomponent Reaction under Solvent-Free Conditions

Abstract: Polysubstituted pyridine derivatives were produced with high to excellent yields in the presence of nitrogen-doped graphene (NDG) as a dual acid-based catalyst. NDG efficiently catalyzes the multicomponent reaction between arylaldehydes, diethyl-acetylene dicarboxylates, malononitrile, and ammonium acetate under solvent-free conditions at 80°C to afford the polysubstituted pyridines in short reaction times. The structures of the synthesized pyridines were established by Ft-IR, 1H, and 13C NMR spectroscopic analysis. The advantages of this method include the in-situ oxidation of prepared 1,4-dihydropyridines, one-pot procedure, solventless system, operational simplicity, and no column chromatography. Additionally, neither toxic solvents nor catalysts are needed, and the procedure can be very reliable among the reported methodologies. The yields and reaction times in the presence of four times recycled catalyst are in comparable to the fresh catalyst.

Synthesis, Characterization, and Optimization of Novel Furan-ring Fused Chalcones via Radical Cyclization of α,β-Unsaturated Ketones and Cyclic Ketone

Abstract: Novel Furan-ring Fused Chalcones (FFC) were synthesized using a radical cyclization reaction of α,β-unsaturated ketones with cyclic ketone as the model reaction to attain this goal. In this study, traditional and microwave-assisted methods for the efficient and cost-effective synthesis of furan-ring fused chalcones in mild reaction conditions are compared and optimized. The goal is to develop a reliable and adaptable synthetic technique that may be used to produce these useful chalcone derivatives quickly and effectively. The optimal experimental conditions for these reactions were carefully determined using two independent methodologies: conventional (Method A) and microwave (Method B). The results indicated that the proposed method B could be used effectively in the future to synthesize novel furans with short reaction times and acceptable yields (87-94 %), and products were purified by column chromatography and preparative thin layer chromatography (PTLC). All new compounds were characterized by 1H-NMR, 13C-NMR, LC-MS, and elemental analyses.

Recent Progress on Synthesis of Functionalized 1,5-Disubstituted Triazoles.

Immediately after the invention of 'Click Chemistry' in 2002, the regioselective 1,2,3- triazole scaffolds resulted from respective organic azides and terminal alkynes under Cu(I) catalysis have been well recognized as the functional heterocyclic core at the centre of modern organic chemistry, medicinal chemistry, and material sciences. This CuAAC reaction has several notable features including excellent regioselectivity, high-to-excellent yields, easy to execute, short reaction time, modular in nature, mild condition, readily available starting materials, etc. Moreover, the resulting regioselective triazoles can serve as amide bond isosteres, a privileged functional group in drug discovery and development. More than hundreds of reviews had been devoted to the 'Click Chemistry' in special reference to 1,4-disubstituted triazoles, while only little efforts were made for an opposite regioisomer i.e., 1,5-disubstituted triazole. Herein, we have presented various classical approaches for an expeditious synthesis of a wide range of biologically relevant 1,5- disubstituted 1,2,3-triazole analogues. The syntheses of such a class of diversly functionalized triazoles have emerged as a crucial investigation in the domain of chemistry and biology. This tutorial review covers the literature assessment on the development of various synthetic protocols for the functionalized 1,5-disubstituted triazoles reported during the last 12 years.

Mechanochemical and Microwave Multistep Organic Reactions

Abstract: The development of more sustainable chemical reactions and processes has been the focus of recent research activities. Advances in the field of organic synthesis have led to the emergence of new methodologies and techniques involving non-conventional energy sources. These include the applications of mechanical energy (mechanochemistry) and microwave radiation (MW) methods. This article reviews the advances in multistep organic synthesis of biologically relevant organic molecules using mechanochemistry and microwave techniques. Among them, various heterocyclic molecules (with nitrogen, oxygen, and sulphur atoms), amides, and peptides have been synthesized by multistep mechanochemical or MW reactions. Performing multiple synthetic steps using more sustainable methods shows cumulative advantages over multistep processes under conventional conditions in terms of reduced solvent use, shorter reaction times, better turnovers, and reaction yields. Simplification of protocols by carrying out two or more reaction steps in the same reaction vessel is another advantage of multistep syntheses.

A Novel Efficient and Biodegradable Natural Catalyst and Bio Based Solvents for the Green One Pot Three Component Synthesis of Tetrahydrobenzo[B]pyran and 3,4-Dihydropyrano[C]chromenes

This study presents a novel and efficient method for synthesizing Tetrahydrobenzo[b]pyran and 3,4-Dihydropyrano[c]chromene derivatives using honey as a highly efficient homogeneous catalyst. Through a one-pot three-component condensation of aromatic aldehydes with malononitrile and dimedone or 4-hydroxycoumarin, excellent yields were achieved under environmentally friendly conditions. The utilization of honey, a non-toxic and biodegradable catalyst, underscores the method's significance in green chemistry. The abstract highlights the method's advantages, including high yields, short reaction times, simple work-up, and its potential for applications in the green pharmaceutical and chemical industries. Additionally, the intricate role of honey as a catalyst in chemical reactions is explored, shedding light on its mechanism and potential applications in organic synthesis and other chemical processes. This research introduces a promising and environmentally friendly approach for the green synthesis of biologically active heterocyclic compounds using a natural, biodegradable catalyst, contributing significantly to the advancement of green chemistry practices.

Catalytic activity of TiO2 nanoparticles in cyclization reactions for pyrazolone formation: DNA binding analysis via spectroscopy, X-ray crystallography, and molecular docking

This method of sustainable synthesis utilizes a range of aromatic/heterocyclic aldehydes, phenylhydrazine, and ethyl acetoacetates. The TiO2 nanoparticle catalyst facilitates cyclization reactions, yielding pyrazolone derivatives with exceptional efficiency (95–97 %) under reflux conditions at 80 °C. The current method achieves high yields of the corresponding cyclo-products in a short reaction time. A variety of physicochemical methods were employed to ascertain the chemical characteristics and structure of the synthesized heterocycles, and the geometrical structure of the well-crystallized compound (Z)-4-((5-bromofuran-2-yl)methylene)-5-methyl-2-phenyl-2,4-dihydro-3H-pyrazol-3-one was characterized by the use of single-crystal X-ray diffraction measurement. The morphology and elemental composition of TiO2 nanoparticles were examined using SEM/EDX before and after the model reaction. A drop in the Ti (titanium) signal following the reaction indicates surface alterations. The present process provides a new and improved synthesis process for the formation of pyrazolones that is more convenient, well organized in terms of good yields, a simple handling procedure, a short reaction time, and user-friendliness compared to other surviving procedures. One of the synthesized compounds, (Z)-4-((5-bromofuran-2-yl)methylene)-5-methyl-2-phenyl-2,4-dihydro-3H-pyrazol-3-one (2), exhibited significant DNA binding activity. This was further confirmed by a molecular docking study, which revealed a binding energy of −7.2 kcal/mol, and by analyzing the mode of interaction.

A Green one-pot three component synthesis of thiazolidine-2,4-dione based bisspirooxindolo-pyrrolidines with [Bmim]BF4: their in vitro and in silico anti-TB studies.

A simple and effective three-component one-pot green methodology was employed for the synthesis of a new thiazolidine-2,4-dione based bisspirooxindolo-pyrrolidine derivatives using [Bmim]BF4 ionic liquid via [3 + 2] cycloaddition reaction. It is an environmentally benign, column chromatography-free, shorter reaction time, good yield and easy product isolation method. The synthesized compounds 10a-x, were thoroughly characterized by using various spectroscopic methods like FT-IR, 1H NMR, 13C NMR, Mass spectrometry and finally by single crystal X-ray diffraction method. In vitro anti-tubercular (anti-TB) activity studies were carried out on these synthesized compounds, and they showed good to moderate anti-TB activity against Mycobacterium tuberculosis H37Rv strain. The compound 10a exhibited good anti-TB activity, with an MIC (Minimum Inhibitory Concentration) value of 12.5µg/mL, and the compounds 10m, 10o and 10r showed moderate activity with an MIC value of 25.0µg/mL. Remaining compounds exhibited poor activity against Mycobacterium tuberculosis. Ethambutol, rifampicin and isoniazid were used as standard drugs. Furthermore, in silico molecular docking experiments on the TB protein (PDB ID: 1DF7) were carried out to understand the binding interactions, and they showed least binding energy values ranging from -8.9 to -7.2kcal/mol.

Treatment of pistachio processing industry wastewaters by supercritical water oxidation in a continuous-flow reactor

ABSTRACT The objective of the present study is the treatment of pistachio processing industry wastewaters (PPIW) using the supercritical water oxidation method. The experiments were conducted within a 400–600°C temperature range and a 30–150 s reaction time range, while maintaining a constant pressure of 25 MPa and using an O2/COD ratio of 1:1. To observe the effects of the initial PPIW and O2 concentrations on the treatment efficiency, experiments were also conducted with O2/COD ratios ranging from 0.5 to 3, while maintaining a constant reaction temperature and time of 500°C and 60 s, respectively. The influence of reaction temperature, reaction time and O2/COD ratio on the total organic carbon (TOC) and total nitrogen (TN) contents of the liquid PPIW effluents were investigated. Treatment efficiencies up to 99.75% regarding TOC conversion and 78.72% regarding TN conversion were obtained in very short reaction times. Additionally, the kinetics of oxidation of PPIW was studied, and reaction rate expressions based on TOC and TN were proposed.

An Atypically Bent Isocyanide at Iron in a Tetrapodal Penta‐Carbene Framework

AbstractReduction of the previously reported Iron (III) complex PhCC4MeFeCl with sodium naphthalide forms the square pyramidal complex PhCC4MeFe (1), cleanly in moderate yield with short reaction times. The related diamagnetic complex PhCC4MeFe(CNtBu) (2) was prepared by addition of an equivalent of tert‐butylisocyanide to a solution of 1. XRD of 2 reveals a rare bent form of the isocyanide moiety with a C−N−C bond angle of 142.67(18)° consistent with sp2 hybridization at the N‐atom while IR spectroscopy reveals an atypically broadened isocyanide stretch at νCNR=1981 cm−1; taken together these metrics are demonstrative of the excellent donor ability of the dianionic penta‐carbene framework and point to a degree of metal‐to‐ligand π‐backbonding rarely seen at isocyanide complexes of iron.

A Decade of Advancement in Ruthenium (II)-Catalyzed Direct C-H Activa-tion and Consequent C-C/C-N Bond Formation Using Microwave Heating

Abstract: Transition-metal catalysed activation of unreactive C-H bonds and subsequent C-C bond formation has emerged as a principal and essential tool in the field of synthetic organic chemistry. On the other hand, the microwave heating technique has been intensively used to carry out organic transformation of almost all kinds and has become a promising non-conventional technique for performing synthetic reactions. Direct C-H activation for C-C bond-forming reactions using ruthe-nium as a catalyst is currently a hot topic and represents a cost-effective synthetic pathway in or-ganic chemistry which is accompanied by the advantages of MW irradiation resulting in shorter reaction time and greener 3 as well as sustainable accomplishments.

Chemo-and regioselective aqueous phase, co-acid free nitration of aromatics using traditional and nontraditional activation methods

Electrophilic aromatic nitrations are used for the preparation of a variety of synthetic products including dyes, agrochemicals, high energy materials, fine chemicals and pharmaceuticals. Traditional nitration methods use highly acidic and corrosive mixed acid systems which present a number of drawbacks. Aside from being hazardous and waste-producing, these methods also often result in poor yields, mostly due to low regioselectivity, and limited functional group tolerance. As a consequence, there is a need for effective and environmentally benign methods for electrophilic aromatic nitrations. In this work, the major aim was to develop reaction protocols that are more environmentally benign while also considering safety issues. The reactions were carried out in dilute aqueous nitric acid, and a broad range of experimental variables, such as acid concentration, temperature, time, and activation method, were investigated. Mesitylene and m-xylene were used as test substrates for the optimization. While the optimized reactions generally occurred at room temperature without any activation under additional solvent-free conditions, slight adjustments in acid concentration, stoichiometric equivalents, and volume were necessary for certain substrates, in addition to the activation. The substrate scope of the process was also investigated using both activated and deactivated aromatics. The concentration of the acid was lowered when possible to improve upon the safety of the process and avoid over-nitration. With some substrates we compared traditional and nontraditional activation methods such as ultrasonic irradiation, microwave and high pressure, respectively, to achieve satisfactory yields and improve upon the greenness of the reaction while maintaining short reaction times.

Synthesis, characterization, and antibacterial effectiveness of gemifloxacin C-3 modified amide analogs: A theoretical and experimental approach

In search of a newer, efficient, and adaptable antimicrobial solution to combat the resistance that has developed due to the widespread extensive and in appropriate use of antibiotics. Seven new amide analogs of Gemifloxacin (G-D01-G-D07), an important member of the fluoroquinolone (FQ's) was synthesized by modifying the C-3 position in a quick and facile way, using Schotten Baumann reaction approach exhibiting highly efficient yields and short reaction times. Their in-silico pharmacokinetic and toxicity studies were determined by SwissADME and Protox-II webserver, and found that all the compounds obeys the lipinski's rule and didn't exhibit any vital organ toxicity. The introduction of selected amines to form amide analogs (G-D01-G-D07) was assured by their spectroscopic characterization, structural stability studies by DFT parameters and Microbiological assay evaluates these synthesized analogs as potent antibacterial and antifungal agents against studied species. At the B3LYP/6–311 G level of theory, the molecular structures, reactivity, and electronic characteristics of candidate compounds exhibiting the most promising antibacterial actions were examined, and their quantum mechanical parameters were calculated. The energy gaps of all the synthesized compounds were found in ranges between 0.1088 and 0.1091 eV, indicating good softness, thermal and kinetic stability. This can be correlated by the activity of these analogs against Klebsiella pneumonia, and Citrobacter freundii, where synthesized derivatives G-D06 and G-D03, G-D04, and G-D07 exhibit activities more than the parent drug. The binding affinity of complexes revealed by docking was found in the range between -14.31 and -16.20 kcal/ mol, which indicates their high antibacterial potential against one of the major targets Klebsiella pneumoniae cytidine deaminase CDA protein by using AutoDock Vina and MD simulations by GROMACS, confirming them as potential antibacterial agents.

Synthesis and characterization of alumina supported molybdosilicic acid (SiMo12/Al2O3): Efficient solid acid catalyst for the synthesis of pyranopyrazole derivatives

A series of highly reusable heterogeneous catalysts (10-40 wt.% SiMo12/Al2O3), consisting of molybdosilicic acid (SiMo12) impregnated on alumina (Al2O3) support was synthesized by the wetness impregnation method. The physicochemical properties of synthesized catalyst were studied using FT-IR, XRD, SEM, EDX, TEM, BET and TG-DTA analysis techniques. The study proves that the synthesized SiMo12 catalyst efficiently incorporated on the surface of Al2O3. The catalytic activity of prepared catalyst was investigated for the synthesis of pyranopyrazole(6-amino-4-phenyl-3-methyl-2,4-dihydropyrano[2,3-c]pyrazole-5carbonitrile) via cyclocondensation reaction of aldehydes, malononitrile, hydrazine hydrate and ethyl-acetoacetate under solvent-free conditions. Among different catalysts, 30% SiMo12 supported on to Al2O3 showed the highest catalytic activity. High yield, shorter reaction time, operational simplicity, solvent-free conditions and reusability of the catalyst are the distinct features of this protocol.

Environmental Sustainability and Physicochemical Property Screening of Chitin and Chitin-Glucan from 22 Fungal Species.

Thanks to its biobased character with embedded biogenic carbon, chitin can aid in the transition to a sustainable circular economy by replacing fossil carbon from the geosphere. However, meeting current demands for material availability and environmental sustainability requires alternative methods limiting conventional chemical and energy-consuming chitin extraction from crustaceans. To assist future chitinous bioproduct development, this work analyzes the physicochemical properties and potential environmental sustainability of fungal chitin-glucan complexes. A conventional isolation procedure using sodium hydroxide, a weak acid, and short reaction times are applied to the fruiting body of 22 fungal species. Besides, the valorization of underutilized waste streams including Agaricus bisporus and Agaricus brunnescens stipes is investigated. The carbohydrate analysis renders chitin fractions in the range of 9.5-63.5 wt %, while yields vary from 4.2 to 29.9%, and the N-acetylation degree in found in between 53.0 and 98.7%. The sustainability of the process is analyzed using life cycle assessment (LCA), providing impact quantification for global warming potential, terrestrial acidification, freshwater eutrophication, and water use. With 87.5-589.3 kg·CO2-equiv per kilo, potentially lower global warming potential values in comparison to crustacean chitin are achieved. The crystallinity degree ranged from 28 to 78%, while the apparent chitin crystalline size (L020) is between 2.3 and 5.4 nm. Ten of the species yield α-chitin coexisting with semicrystalline glucans. Zwitterionic properties are observed in aqueous solutions, shifting from cationic to anionic at pH 4.5. With its renewable carbon content, fungal chitin is an environmentally sustainable alternative for high-value applications due to its balance of minimal treatment, low carbon footprint, material renewability, ease of isolation, thermal stability, zwitterionic behavior, biodegradability, and noncytotoxicity.

Stepwise Synthesis of Low-Symmetry Hexacationic Pyridinium Organic Cages.

An efficient approach was developed for the synthesis of the well-known BlueCage by pre-bridging two 2,4,6-tris(4-pyridyl)-1,3,5-triazine (TPT) panels with one linker followed by cage formation in a much improved yield and shortened reaction time. Such a stepwise methodology was further applied to synthesize three new pyridinium organic cages, C2, C3, and C4, where the low-symmetry cages C3 and C4 with angled panels demonstrated better recognition properties toward 1,1'-bi-2-naphthol (BINOL) than the high-symmetry analogue C2 featuring parallel platforms.

An improved microwave‐assisted facile one‐pot synthesis of novel pyrazolylphosphonates via Knoevenagel‐phospha‐Michael protocol

AbstractIn this study, a highly effective microwave‐assisted method employing a multicomponent domino Knoevenagel/phospha‐Michael reaction has been established. This approach facilitates the synthesis of a novel set of pyrazolylphosphonate derivatives in good yields by combining aryl aldehydes with pyrazolones and trialkylphosphites, utilizing piperidine as a Bronsted base catalyst. All pyrazolylphosphonates have been characterized by means of IR, 1H‐NMR, 13C‐NMR, and HRMS analyses and physical methods. This protocol can be characterized by its eco‐friendly nature, exceptional efficiency in terms of product yields, and short reaction times.

Synthesis, In Silico Study, and In Vitro Antifungal Activity of New 5-(1,3-Diphenyl-1H-Pyrazol-4-yl)-4-Tosyl-4,5-Dihydrooxazoles.

The increase in multi-drug resistant Candida strains has caused a sharp rise in life-threatening fungal infections in immunosuppressed patients, including those with SARS-CoV-2. Novel antifungal drugs are needed to combat multi-drug-resistant yeasts. This study aimed to synthesize a new series of 2-oxazolines and evaluate the ligands in vitro for the inhibition of six Candida species and in silico for affinity to the CYP51 enzymes (obtained with molecular modeling and protein homology) of the same species. The 5-(1,3-diphenyl-1H-pyrazol-4-yl)-4-tosyl-4,5-dihydrooxazoles 6a-j were synthesized using the Van Leusen reaction between 1,3-diphenyl-4-formylpyrazoles 4a-j and TosMIC 5 in the presence of K2CO3 or KOH without heating, resulting in short reaction times, high compound purity, and high yields. The docking studies revealed good affinity for the active site of the CYP51 enzymes of the Candida species in the following order: 6a-j > 4a-j > fluconazole (the reference drug). The in vitro testing of the compounds against the Candida species showed lower MIC values for 6a-j than 4a-j, and for 4a-j than fluconazole, thus correlating well with the in silico findings. According to growth rescue assays, 6a-j and 4a-j (like fluconazole) inhibit ergosterol synthesis. The in silico toxicity assessment evidenced the safety of compounds 6a-j, which merit further research as possible antifungal drugs.

Cu(I)‐Catalyzed Coupling Reactions of β‐Nitrostyrene, 1,3‐Dicarbonyl compound & Aryl amine: An Efficient Method For the Synthesis of Polysubstituted Pyrroles

AbstractA convenient Cu(I) Catalyzed three‐component coupling strategy for the synthesis of polysubstituted pyrroles is developed using simple and readily available building blocks like, 1, 3‐dicarbonyl compound, aryl amine, and β‐nitrostyrene. CuI has been rarely explored for the pyrrole ring synthesis and a comparative analysis of our current catalyst with a range of previously reported catalysts suggested that, CuI is one of the best catalysts for the multicomponent synthesis of polysubstituted pyrrole derivatives. Notably, this process has several advantages, including a simple and practical set‐up with hassle free reaction conditions, extensive substrate scope, short reaction time, high atom economy and environmentally favorable approach. This methodology provides an alternative approach to the highly substituted pyrroles and under optimized reaction conditions, polysubstituted pyrroles were formed in good to excellent yields. Cu(I) catalyzed Mannich reactions followed by Michael addition reactions along with subsequent intramolecular cyclization are believed to be the key steps of this reaction process.