Short Helix Research Articles

Structure and properties of the giant reed (Arundo donax) lectin (ADL).

Arundo donax lectin (ADL) is a 170 amino acid protein that can be purified from the rhizomes of the giant reed or giant cane by exploiting its selective binding to chitin followed by elution with N-acetylglucosamine. The lectin is listed in the UniProt server, the largest protein sequence database, as an uncharacterized protein with chitin-binding domains (A0A0A9P802). This paper reports the purification, structure and ligand-binding properties of ADL. The lectin is a homodimer in which the two protomers are linked by two disulfide bridges. Each polypeptide chain presents four carbohydrate-binding modules that belong to carbohydrate-binding module family 18. A high degree of sequence similarity is observed among the modules present in each protomer. We have determined the X-ray structure of the apo-protein to a resolution of 1.70Å. The carbohydrate-binding modules, that span a sequence of approximately 40 amino acids, present four internal disulfide bridges, a very short antiparallel central beta sheet and three short alpha helices, two on one side of the beta sheet and one on the other. The structures of the complexes of the lectin with N-acetylglucosamine, N-acetyllactosamine, N-acetylneuraminic acid and N-N'diacetylchitobiose reveal that ADL has two primary and two secondary carbohydrate-binding sites per dimer. They are located at the interface between the two protomers, and each binding site involves residues of both chains. The lectin presents structural similarity to the wheat germ agglutinin family, in particular, to isoform 3.

Interactions of SARS-CoV-2 envelope protein with amilorides correlate with antiviral activity.

SARS-CoV-2 is the novel coronavirus that is the causative agent of COVID-19, a sometimes-lethal respiratory infection responsible for a world-wide pandemic. The envelope (E) protein, one of four structural proteins encoded in the viral genome, is a 75-residue integral membrane protein whose transmembrane domain exhibits ion channel activity and whose cytoplasmic domain participates in protein-protein interactions. These activities contribute to several aspects of the viral replication-cycle, including virion assembly, budding, release, and pathogenesis. Here, we describe the structure and dynamics of full-length SARS-CoV-2 E protein in hexadecylphosphocholine micelles by NMR spectroscopy. We also characterized its interactions with four putative ion channel inhibitors. The chemical shift index and dipolar wave plots establish that E protein consists of a long transmembrane helix (residues 8-43) and a short cytoplasmic helix (residues 53-60) connected by a complex linker that exhibits some internal mobility. The conformations of the N-terminal transmembrane domain and the C-terminal cytoplasmic domain are unaffected by truncation from the intact protein. The chemical shift perturbations of E protein spectra induced by the addition of the inhibitors demonstrate that the N-terminal region (residues 6-18) is the principal binding site. The binding affinity of the inhibitors to E protein in micelles correlates with their antiviral potency in Vero E6 cells: HMA ≈ EIPA > DMA >> Amiloride, suggesting that bulky hydrophobic groups in the 5' position of the amiloride pyrazine ring play essential roles in binding to E protein and in antiviral activity. An N15A mutation increased the production of virus-like particles, induced significant chemical shift changes from residues in the inhibitor binding site, and abolished HMA binding, suggesting that Asn15 plays a key role in maintaining the protein conformation near the binding site. These studies provide the foundation for complete structure determination of E protein and for structure-based drug discovery targeting this protein.

NMR structural analysis of the yeast cytochrome c oxidase subunit Cox13 and its interaction with ATP

BackgroundMitochondrial respiration is organized in a series of enzyme complexes in turn forming dynamic supercomplexes. In Saccharomyces cerevisiae (baker’s yeast), Cox13 (CoxVIa in mammals) is a conserved peripheral subunit of Complex IV (cytochrome c oxidase, CytcO), localized at the interface of dimeric bovine CytcO, which has been implicated in the regulation of the complex.ResultsHere, we report the solution NMR structure of Cox13, which forms a dimer in detergent micelles. Each Cox13 monomer has three short helices (SH), corresponding to disordered regions in X-ray or cryo-EM structures of homologous proteins. Dimer formation is mainly induced by hydrophobic interactions between the transmembrane (TM) helix of each monomer. Furthermore, an analysis of chemical shift changes upon addition of ATP revealed that ATP binds at a conserved region of the C terminus with considerable conformational flexibility.ConclusionsTogether with functional analysis of purified CytcO, we suggest that this ATP interaction is inhibitory of catalytic activity. Our results shed light on the structural flexibility of an important subunit of yeast CytcO and provide structure-based insight into how ATP could regulate mitochondrial respiration.

Single crystals of mechanically entwined helical covalent polymers.

Double helical conformation of polymer chains is widely observed in biomacromolecules and plays an essential role in exerting their biological functions, such as molecular recognition and information storage. It has remained challenging, however, to prepare synthetic helical polymers, and those that exist have mainly been limited to single-stranded polymers or short oligomeric double helices. Here, we report the synthesis of covalent helical polymers, with a high molecular weight, from the achiral monomer hexahydroxytriphenylene through to spiroborate formation. Polymerization and crystallization occurred simultaneously under solvothermal conditions to form single crystals of the resulting helical covalent polymers. Characterization by single-crystal X-ray diffraction showed that each crystal consisted of pairs of mechanically entwined polymers. No strong non-covalent interactions were observed between the two helical polymers that formed a pair; instead, each strand interacted with neighbouring pairs through hydrogen bonding. Each individual crystal was made up of helical polymers of the same handedness, but the crystallization process produced a racemic conglomerate, with equal amounts of right-handed and left-handed crystals.

Aging of polypropylene probed by near infrared spectroscopy

This paper describes the first in-depth attempt to characterize thermally induced aging of polypropylene (PP) samples by near infrared (NIR) spectroscopy. Significant levels of variation in NIR bands associated with short (amorphous-dominated) and long (crystalline-dominated) helices was readily captured when PP samples were subjected to thermal aging treatment. Partial least squares (PLS) regression models derived from the NIR spectra indicated significant level of correlation between the actual and predicted elongations of the samples. Analysis of PLS scores and two-dimensional (2D) correlation spectra derived from the aged PP samples revealed inner working mechanism of the regression model. Namely, the aging treatment essentially induces compositional change in crystalline and amorphous structures of the PP samples, which eventually affect the variation of the PLS scores. Thus, by utilizing the scores, it becomes possible to predict the change in the elongation property of the aged PP sample.

The molecular pH-response mechanism of the plant light-stress sensor PsbS

Plants need to protect themselves from excess light, which causes photo-oxidative damage and lowers the efficiency of photosynthesis. Photosystem II subunit S (PsbS) is a pH sensor protein that plays a crucial role in plant photoprotection by detecting thylakoid lumen acidification in excess light conditions via two lumen-faced glutamates. However, how PsbS is activated under low-pH conditions is unknown. To reveal the molecular response of PsbS to low pH, here we perform an NMR, FTIR and 2DIR spectroscopic analysis of Physcomitrella patens PsbS and of the E176Q mutant in which an active glutamate has been replaced. The PsbS response mechanism at low pH involves the concerted action of repositioning of a short amphipathic helix containing E176 facing the lumen and folding of the luminal loop fragment adjacent to E71 to a 310-helix, providing clear evidence of a conformational pH switch. We propose that this concerted mechanism is a shared motif of proteins of the light-harvesting family that may control thylakoid inter-protein interactions driving photoregulatory responses.

Novel Roles of the N1 Loop and N4 Alpha-Helical Region of the Nipah Virus Fusion Glycoprotein in Modulating Early and Late Steps of the Membrane Fusion Cascade.

Nipah virus (NiV) is a zoonotic bat henipavirus in the family Paramyxoviridae NiV is deadly to humans, infecting host cells by direct fusion of the viral and host cell plasma membranes. This membrane fusion process is coordinated by the receptor-binding attachment (G) and fusion (F) glycoproteins. Upon G-receptor binding, F fuses membranes via a cascade that sequentially involves F-triggering, fusion pore formation, and viral or genome entry into cells. Using NiV as an important paramyxoviral model, we identified two novel regions in F that modulate the membrane fusion cascade. For paramyxoviruses and other viral families with class I fusion proteins, the heptad repeat 1 (HR1) and HR2 regions in the fusion protein prefusion conformation bind to form a six-helix bundle in the postfusion conformation. Here, structural comparisons between the F prefusion and postfusion conformations revealed that a short loop region (N1) undergoes dramatic spatial reorganization and a short alpha helix (N4) undergoes secondary structural changes. The roles of the N1 and N4 regions during the membrane fusion cascade, however, remain unknown for henipaviruses and paramyxoviruses. By performing alanine scanning mutagenesis and various functional analyses, we report that specific residues within these regions alter various steps in the membrane fusion cascade. While the N1 region affects early F-triggering, the N4 region affects F-triggering, F thermostability, and extensive fusion pore expansion during syncytium formation, also uncovering a link between F-G interactions and F-triggering. These novel mechanistic roles expand our understanding of henipaviral and paramyxoviral F-triggering, viral entry, and cell-cell fusion (syncytia), a pathognomonic feature of paramyxoviral infections.IMPORTANCE Henipaviruses infect bats, agriculturally important animals, and humans, with high mortality rates approaching ∼75% in humans. Known human outbreaks have been concentrated in Southeast Asia and Australia. Furthermore, about 20 new henipaviral species have been recently discovered in bats, with geographical spans in Asia, Africa, and South America. The development of antiviral therapeutics requires a thorough understanding of the mechanism of viral entry into host cells. In this study, we discovered novel roles of two regions within the fusion protein of the deadly henipavirus NiV. Such roles were in allowing viral entry into host cells and cell-cell fusion, a pathological hallmark of this and other paramyxoviruses. These novel roles were in the previously undescribed N1 and N4 regions within the fusion protein, modulating early and late steps of these important processes of viral infection and henipaviral disease. Notably, this knowledge may apply to other henipaviruses and more broadly to other paramyxoviruses.

Structural analyses of an RNA stability element interacting with poly(A)

Cis-acting RNA elements are crucial for the regulation of polyadenylated RNA stability. The element for nuclear expression (ENE) contains a U-rich internal loop flanked by short helices. An ENE stabilizes RNA by sequestering the poly(A) tail via formation of a triplex structure that inhibits a rapid deadenylation-dependent decay pathway. Structure-based bioinformatic studies identified numerous ENE-like elements in evolutionarily diverse genomes, including a subclass containing two ENE motifs separated by a short double-helical region (double ENEs [dENEs]). Here, the structure of a dENE derived from a rice transposable element (TWIFB1) before and after poly(A) binding (∼24 kDa and ∼33 kDa, respectively) is investigated. We combine biochemical structure probing, small angle X-ray scattering (SAXS), and cryo-electron microscopy (cryo-EM) to investigate the dENE structure and its local and global structural changes upon poly(A) binding. Our data reveal 1) the directionality of poly(A) binding to the dENE, and 2) that the dENE-poly(A) interaction involves a motif that protects the 3'-most seven adenylates of the poly(A). Furthermore, we demonstrate that the dENE does not undergo a dramatic global conformational change upon poly(A) binding. These findings are consistent with the recently solved crystal structure of a dENE+poly(A) complex [S.-F. Torabi et al., Science 371, eabe6523 (2021)]. Identification of additional modes of poly(A)-RNA interaction opens new venues for better understanding of poly(A) tail biology.

Mapping Amino Acids at Protein-Membrane Interfaces to Update the Current Membrane Binding Model

Peripheral Membrane Proteins (PMP) are essential components of multiple biological processes like lipid metabolism, membrane remodelling and other complex cellular pathways. They bind transiently to the surface of biological membranes through short helices or loops, and their Interfacial Binding Site (IBS) has been described as displaying basic and hydrophobic amino acids. However, recent studies indicate that this model is too simplistic to account for the fine-tuned lipid specificity achieved by many PMPs (Grauffel et al., JACS, 2013; Chon et al., Biochemistry, 2015). Terms like “hydrophobic spikes” or “protruding loops” have been used to describe PMP IBS. Recently we proposed a hydrophobic protrusion model for IBSs (Fuglebakk et al., Plos Comp. Biol., 2018). This model is based on the calculation of the protein convex hull and its vertices. When tested on a dataset of 300 protein families it showed good performance in discriminating membrane-binding proteins from a reference dataset. This shows that it captures a structural pattern common to PMP families. Yet it does not have the resolution to capture fine differences between families, and these differences may be decisive for their membrane specificity. In order to characterize the IBS of the PH, SH2 and C2 domains at a finer resolution we collected a curated dataset of structures and sequences from the CATH database (Sillitoe et al., NAR, 2019). We developed a statistical framework and could map the frequency of charged amino acids and aromatic amino acids at protrusions and around protruding hydrophobes in the three domains. We will present and discuss the differences between the three domains and how they relate to their function.

Residue-Level Contact Reveals Modular Domain Interactions of PICK1 Are Driven by Both Electrostatic and Hydrophobic Forces.

PICK1 is a multi-domain scaffolding protein that is uniquely comprised of both a PDZ domain and a BAR domain. While previous experiments have shown that the PDZ domain and the linker positively regulate the BAR domain and the C-terminus negatively regulates the BAR domain, the details of internal regulation mechanisms are unknown. Molecular dynamics (MD) simulations have been proven to be a useful tool in revealing the intramolecular interactions at atomic-level resolution. PICK1 performs its biological functions in a dimeric form which is extremely computationally demanding to simulate with an all-atom force field. Here, we use coarse-grained MD simulations to expose the key residues and driving forces in the internal regulations of PICK1. While the PDZ and BAR domains do not form a stable complex, our simulations show the PDZ domain preferentially interacting with the concave surface of the BAR domain over other BAR domain regions. Furthermore, our simulations show that the short helix in the linker region can form interactions with the PDZ domain. Our results reveal that the surface of the βB-βC loop, βC strand, and αA-βD loop of the PDZ domain can form a group of hydrophobic interactions surrounding the linker helix. These interactions are driven by hydrophobic forces. In contrast, our simulations reveal a very dynamic C-terminus that most often resides on the convex surface of the BAR domain rather than the previously suspected concave surface. These interactions are driven by a combination of electrostatic and hydrophobic interactions.

The model structure of the hammerhead ribozyme formed by RNAs of reciprocal chirality.

RNA-based tools are frequently used to modulate gene expression in living cells. However, the stability and effectiveness of such RNA-based tools is limited by cellular nuclease activity. One way to increase RNA’s resistance to nucleases is to replace its D-ribose backbone with L-ribose isomers. This modification changes chirality of an entire RNA molecule to L-form giving it more chance of survival when introduced into cells. Recently, we have described the activity of left-handed hammerhead ribozyme (L-Rz, L-HH) that can specifically hydrolyse RNA with the opposite chirality at a predetermined location. To understand the structural background of the RNA specific cleavage in a heterochiral complex, we used circular dichroism (CD) and nuclear magnetic resonance (NMR) spectroscopy as well as performed molecular modelling and dynamics simulations of homo- and heterochiral RNA complexes. The active ribozyme-target heterochiral complex showed a mixed chirality as well as low field imino proton NMR signals. We modelled the 3D structures of the oligoribonucleotides with their ribozyme counterparts of reciprocal chirality. L- or D-ribozyme formed a stable, homochiral helix 2, and two short double heterochiral helixes 1 and 3 of D- or L-RNA strand thorough irregular Watson–Crick base pairs. The formation of the heterochiral complexes is supported by the result of simulation molecular dynamics. These new observations suggest that L-catalytic nucleic acids can be used as tools in translational biology and diagnostics.

ATP utilization by a DEAD-box protein during refolding of a misfolded group I intron ribozyme

DEAD-box helicase proteins perform ATP-dependent rearrangements of structured RNAs throughout RNA biology. Short RNA helices are unwound in a single ATPase cycle, but the ATP requirement for more complex RNA structural rearrangements is unknown. Here we measure the amount of ATP used for native refolding of a misfolded group I intron ribozyme by CYT-19, a Neurospora crassa DEAD-box protein that functions as a general chaperone for mitochondrial group I introns. By comparing the rates of ATP hydrolysis and ribozyme refolding, we find that several hundred ATP molecules are hydrolyzed during refolding of each ribozyme molecule. After subtracting nonproductive ATP hydrolysis that occurs in the absence of ribozyme refolding, we find that approximately 100 ATPs are hydrolyzed per refolded RNA as a consequence of interactions specific to the misfolded ribozyme. This value is insensitive to changes in ATP and CYT-19 concentration and decreases with decreasing ribozyme stability. Because of earlier findings that ∼90% of global ribozyme unfolding cycles lead back to the kinetically preferred misfolded conformation and are not observed, we estimate that each global unfolding cycle consumes ∼10 ATPs. Our results indicate that CYT-19 functions as a general RNA chaperone by using a stochastic, energy-intensive mechanism to promote RNA unfolding and refolding, suggesting an evolutionary convergence with protein chaperones.

Structural basis of KdpD histidine kinase binding to the second messenger c-di-AMP

The KdpDE two-component system regulates potassium homeostasis and virulence in various bacterial species. The KdpD histidine kinases (HK) of this system contain a universal stress protein (USP) domain which binds to the second messenger cyclic-di-adenosine monophosphate (c-di-AMP) for regulating transcriptional output from this two-component system in Firmicutes such as Staphylococcus aureus. However, the structural basis of c-di-AMP specificity within the KdpD-USP domain is not well understood. Here, we resolved a 2.3 Å crystal structure of the S. aureus KdpD-USP domain (USPSa) complexed with c-di-AMP. Binding affinity analyses of USPSa mutants targeting the observed USPSa:c-di-AMP structural interface enabled the identification of the sequence residues that are required for c-di-AMP specificity. Based on the conservation of these residues in other Firmicutes, we identified the binding motif, (A/G/C)XSXSX2N(Y/F), which allowed us to predict c-di-AMP binding in other KdpD HKs. Furthermore, we found that the USPSa domain contains structural features distinct from the canonical standalone USPs that bind ATP as a preferred ligand. These features include inward-facing conformations of its β1-α1 and β4-α4 loops, a short α2 helix, the absence of a triphosphate-binding Walker A motif, and a unique dual phospho-ligand binding mode. It is therefore likely that USPSa-like domains in KdpD HKs represent a novel subfamily of the USPs.

Characterizing an allosteric inhibitor-induced inactive state in with-no-lysine kinase 1 using Gaussian accelerated molecular dynamics simulations.

The With-No-Lysine (WNK) kinase plays a significant role in controlling blood pressure and body fluid homeostasis. Consequently, WNK1 is considered a potential target for treating hypertension. However, the highly conserved ATP-binding pocket in human isoforms WNK1/2/3/4 poses an immense challenge in designing competitive inhibitors. In contrast, allosteric inhibitors that bind to a non-conserved site provide a promising approach. To better understand how the allosteric inhibitors induce an inactive state in WNK1, we have performed 1 μs long Gaussian accelerated molecular dynamics simulations (GaMD) of the apo and complex systems along with free energy calculations and structural analyses. Our results indicate that major structural variations come from the activation loop and αC-helix. Our studies suggest that the inactive state is characterized by an open catalytic cleft between the N- and C-lobe, outward movement of the αC-helix, open P-loop, distorted αC-helix, and an extended activation loop that rearranges with a vanished short helix in its N-terminal. The outward movement of the αC-helix breaks the salt-bridge between Glu268 and R348 and renders the kinase domain inactive. Overall, our study provides detailed insights into the inhibitor-induced allosteric mechanisms and may help design specific allosteric inhibitors against WNK1 for treating hypertension.

Structural Insight into the Contributions of the N-Terminus and Key Active-Site Residues to the Catalytic Efficiency of Glutamine Synthetase 2.

Glutamine synthetase (GS) catalyzes the condensation of ammonia and glutamate, along with ATP, to form glutamine. Despite extensive studies on GSs from eukaryotes and prokaryotes, the roles of the N-terminus and other structural features in catalysis remain unclear. Here we report the decameric structure of Drosophila melanogaster GS 2 (DmGS2). The N-terminal short helices, α1 and α2, constitute a meander region, and form hydrogen bonds with residues 3–5 in the N-terminal loop, which are not present in the GSs of other species. Deletion of α1 or α1-α2 inactivates DmGS2. Notably, the Arg4 in each monomer of one pentamer forms hydrogen bonds with Glu7, and Asp8 in the adjacent monomer of the other pentamer. Replacement of Arg4 with Asp (R4D) abolishes activity. Analytical ultracentrifugation revealed that Arg4 is crucial for oligomerization. Circular dichroism spectra revealed that R4D may alter the secondary structure. We mutated key residues to identify the substrate-binding site. As Glu140 binds glutamate and Glu311 binds ammonia, mutants E140A and E311A have little activity. Conversely, mutant P214A (P contributes to ATP binding) has higher activity than wild-type DmGS2. These findings expand the understanding of the structural and functional features of the N-terminal meander region of DmGS2 and the residues important for catalytic efficiency.

A novel protein-engineered dsDNA-binding protein (HU-Simulacrum) inspired by HU, a nucleoid-associated DNABII protein

HU, a DNA-binding protein, has a helical N-terminal region (NTR) of ∼44 residues and a beta strand- and IDR-rich C-terminal region (CTR) of ∼46 residues. CTR binds to DNA through (i) a clasp (two arginine/lysine-rich, IDR-rich beta hairpins that bind to phosphate groups in the minor groove), (ii) a flat surface (comprising four antiparallel beta strands that abut the major groove), and (iii) a charge cluster (two lysine residues upon a short C-terminal helix). HU forms a dimer displaying extensive inter-subunit CTR-CTR contacts. A single-chain simulacrum of these contacts (HU-Simul) incorporating all DNA-binding elements was created by fusing together the CTRs of Escherichia coli HU-A and Thermus thermophilus HU. HU-Simul is monomeric, binds to dsDNA and cruciform DNA, but not to ssDNA.

A new molecular mechanism of RNA circularization and the microRNA sponge formation

A new mechanism of RNA circularization driven by specific binding of miRNAs is described. We identified the 71 CUUCC pentanucleotide motifs distributed regularly throughout the entire molecule of CDR1as RNA that bind to 71 miRNAs through their seed sequence GGAAG. The sequential binding of miR-7 RNAs (71 molecules) brings both ends of CDR1as RNA (1 molecule) together and stimulate phosphodiester bond formation between nucleotides C1 and A1299 at the 5’ and 3’ end, respectively. The binding of miRNAs to CDR1as RNA results in the unique complex formation, which shows three specific structural domains: (i) two short helixes with an internal loop, (ii) the hinge, and (iii) the triple-helix. The proposed mechanism explains specific RNA circularization and its function as a miRNAs sponge. Furthermore, the existing wet experimental data on the interaction of CDR1as RNA with miR-7 fully supports our observation. Although miR-671 shows the same seed sequence as miR-7, it forms an almost perfect double helix with CDR1as RNA and induces the cleavage of CDR1as, but does not stimulate circularization. To check how common is the proposed mechanism among circular RNAs, we analyzed the most recent circAtlas database counting almost 1.1 million sequences. It turned out that there are a huge number of circRNAs, which showed miRNAs seed binding sequences distributed through the whole circRNA sequences and prove that circularization of linear transcript is miRNA dependent. Communicated by Ramaswamy H. Sarma

Phylogenetics-based identification and characterization of a superior 2,3-butanediol dehydrogenase for Zymomonas mobilis expression

BackgroundZymomonas mobilis has recently been shown to be capable of producing the valuable platform biochemical, 2,3-butanediol (2,3-BDO). Despite this capability, the production of high titers of 2,3-BDO is restricted by several physiological parameters. One such bottleneck involves the conversion of acetoin to 2,3-BDO, a step catalyzed by 2,3-butanediol dehydrogenase (Bdh). Several Bdh enzymes have been successfully expressed in Z. mobilis, although a highly active enzyme is yet to be identified for expression in this host. Here, we report the application of a phylogenetic approach to identify and characterize a superior Bdh, followed by validation of its structural attributes using a mutagenesis approach.ResultsOf the 11 distinct bdh genes that were expressed in Z. mobilis, crude extracts expressing Serratia marcescens Bdh (SmBdh) were found to have the highest activity (8.89 µmol/min/mg), when compared to other Bdh enzymes (0.34–2.87 µmol/min/mg). The SmBdh crystal structure was determined through crystallization with cofactor (NAD+) and substrate (acetoin) molecules bound in the active site. Active SmBdh was shown to be a tetramer with the active site populated by a Gln247 residue contributed by the diagonally opposite subunit. SmBdh showed a more extensive supporting hydrogen-bond network in comparison to the other well-studied Bdh enzymes, which enables improved substrate positioning and substrate specificity. This protein also contains a short α6 helix, which provides more efficient entry and exit of molecules from the active site, thereby contributing to enhanced substrate turnover. Extending the α6 helix to mimic the lower activity Enterobacter cloacae (EcBdh) enzyme resulted in reduction of SmBdh function to nearly 3% of the total activity. In great contrast, reduction of the corresponding α6 helix of the EcBdh to mimic the SmBdh structure resulted in ~ 70% increase in its activity.ConclusionsThis study has demonstrated that SmBdh is superior to other Bdhs for expression in Z. mobilis for 2,3-BDO production. SmBdh possesses unique structural features that confer biochemical advantage to this protein. While coordinated active site formation is a unique structural characteristic of this tetrameric complex, the smaller α6 helix and extended hydrogen network contribute towards improved activity and substrate promiscuity of the enzyme.

Advances in capillary-based immobilized enzyme microreactor based on DNA-directed immobilization

Life processes such as metabolism and energy conversion are catalyzed by biological enzymes. The changes of enzymatic activity in organisms can lead various diseases. Thus, it is imperative to develop novel methods of analyzing enzymatic activities for gaining deeper insights into metabolic processes, disease diagnosis, and drug development. Capillary electrophoresis (CE) has the advantages of high separation efficiency, fast analysis speed, and simple operation; moreover, it requires less sample and can be combined with a variety of detection methods. Therefore, CE has attracted increasing attention for enzyme analysis. Enzyme analysis based on CE mainly includes off-line mode and on-line mode. In the off-line mode, the enzyme and substrate are incubated outside the capillary, and then the product is introduced into the CE for analysis. In the on-line mode, the capillary is not only used as a separation channel, but also as an enzyme reaction site. Therefore, the on-line mode facilitates all steps of enzymatic hydrolysis, separation, and detection within a capillary. In the on-line mode, homogeneous analysis method, electrophoretically mediated microanalysis (EMMA), and heterogeneous analysis method, immobilized enzyme microreactor (IMER), were developed. The on-line enzyme analysis method of IMER combined with capillary electrophoresis (CE-IMER) was developed into a mainstream enzyme analysis method. CE-IMER combines the advantages of immobilized enzyme and CE. By immobilizing the free enzyme in capillary, it can not only significantly improve the stability and reusability of enzyme, but also enables the automatic enzyme analysis at nanoscale. This can significantly reduce the cost of enzyme analysis. Although, there are numerous methods to prepare new IMER for enzyme analysis by CE, preparing CE-IMER with good performance, reusability, large enzyme loading, and high degree of automation is the focus of research in this field. DNA-directed immobilization (DDI) makes use of the complementary base pairs (A-T, C-G) of DNA molecules to specifically immobilize biomacromolecules under mild physiological conditions. The enzyme can be immobilized on the carrier surface by DDI and the short double helix DNA molecules possess strong mechanical strength and physicochemical stability. This can form an enzyme microarray, reduce the resistance of mass transfer, improve the contact between enzyme and substrate, and promote the enzymatic analysis process. Compared with the traditional immobilization methods of adsorption, crosslinking, encapsulation, and covalent bonding, DDI can be operated under mild physiological conditions. Further, this can significantly reduce the influence of the immobilization process on the activity, conformation, and stability of the enzyme. Meanwhile, the reversible immobilization process of DDI can regenerate the surface of the carrier, thereby significantly reducing the economic and time cost of IMER preparation. Therefore, DDI is an ideal method to prepare IMER. In this article, the preliminary research and progress of our research group in the field of IMER preparation by DDI technology are presented. At present, the research on the preparation of novel IMER based on DNA nanotechnology, such as DDI, is in the initial stage and there is much scope for development and research. Based on the previous studies, we can focus on the following aspects: (1) building a more efficient catalytic IMER cascade reaction system by immobilizing target enzymes in specific regions of the capillary based on DDI; (2) aiming at the problems existing in the preparation of IMER, such as stability, enzymatic activity, and enzyme immobilization capacity, while taking advantages of DNA structure and nanomaterials to prepare novel IMERs to promote the wide application of CE-IMER in enzyme analysis.

Structural bioinformatics predicts that the Retinitis Pigmentosa-28 protein of unknown function FAM161A is a homologue of the microtubule nucleation factor Tpx2

Background: FAM161A is a microtubule-associated protein conserved widely across eukaryotes, which is mutated in the inherited blinding disease Retinitis Pigmentosa-28. FAM161A is also a centrosomal protein, being a core component of a complex that forms an internal skeleton of centrioles. Despite these observations about the importance of FAM161A, current techniques used to examine its sequence reveal no homologies to other proteins. Methods: Sequence profiles derived from multiple sequence alignments of FAM161A homologues were constructed by PSI-BLAST and HHblits, and then used by the profile-profile search tool HHsearch, implemented online as HHpred, to identify homologues. These in turn were used to create profiles for reverse searches and pair-wise searches. Multiple sequence alignments were also used to identify amino acid usage in functional elements. Results: FAM161A has a single homologue: the targeting protein for Xenopus kinesin-like protein-2 (Tpx2), which is a strong hit across more than 200 residues. Tpx2 is also a microtubule-associated protein, and it has been shown previously by a cryo-EM molecular structure to nucleate microtubules through two small elements: an extended loop and a short helix. The homology between FAM161A and Tpx2 includes these elements, as FAM161A has three copies of the loop, and one helix that has many, but not all, properties of the one in Tpx2. Conclusions: FAM161A and ­its homologues are predicted to be a previously unknown variant of Tpx2, and hence bind microtubules in the same way. This prediction allows precise, testable molecular models to be made of FAM161A-microtubule complexes.