Short Diffusion Distance Research Articles

Self-powered Schottky barrier photodetectors based on P3HT:PC61BM bulk heterojunction films

By employing the classic system poly(3-hexylthiophene-2,5-diyl): [6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PC61BM), organic bulk heterojunction films were applied on an indium tin oxide substrate using a one-step spin-coating method, without requiring any complex manufacturing processes, to obtain self-powered photodetectors (PDs) with a simple preparation process. The fullerene material was introduced to create a bulk heterojunction film with proper phase separation and greatly enrich the donor/acceptor dissociation interface, thus improving the high exciton binding energy and short exciton diffusion distance. The built-in electric field formed by the Schottky junction at the interface between the active layer and electrode can enhance the separation of excitons and the transport of charge carriers, realizing optical detection without external energy sources. Moreover, femtosecond transient absorption was employed to investigate the exciton dynamics in organic films and analyze the working mechanism of self-powered detection performance. The long-lived behavior of carriers and the formation of charge transfer states were further verified, which contributed to the enhanced performance of the device. As a result, the self-powered PD-based Schottky bulk heterojunction presents a high light on/off ratio of over 104 (0 V) and fast response speed with rise and decay times of 33 and 36 µs, respectively, under a 532 nm light illumination. These results provide theoretical and experimental verification of this technique for the development of self-powered PDs in the field of organic materials.

N/P/O co-doped porous carbon derived from agroindustry waste of peanut shell for sodium-ion storage

Porous bio‑carbon from agroindustry waste behaves one of the most promising anode materials for sodium-ion batteries (SIBs) because of its high sodium storage capacity, low cost, sustainability, and low charge/discharge voltage platform. Herein, we have developed a new N/P/O co-doped porous hard carbon derived from peanut shell (PSCNP) synthesized via KOH activation, hydrothermal doping combined with carbonization method, using chitosan as nitrogen source, phytic acid as phosphorus source, and peanut shell as carbon and oxygen source. Through seriously regulating the calcination temperature, the optimal PSCNP-800 carbonization at 800 °C can well combine the advantages of the natural rich porous microstructure of peanut shells, large graphite interlayer spacing (0.379 nm), and short diffusion distance for sodium-ion. As an advanced anode for SIBs, the PSCNP-800 delivered a reversible capacity of 248.8 mAh g−1 after 100 cycles at 25 mA g−1. This work could provide a possible idea for the preparation of N/P/O co-doped porous hard carbon from low-cost agroindustry waste as anodes for SIBs.

Janus-structured graphene scaffold for bottom-up lithium deposition: A progressive gradient approach

Graphene-based materials have been explored as hosts for Li metal anodes, but their high interfacial activity and short diffusion distances frequently result in dendrite formation on the surface. Herein, we utilize the adjustable conductivity and Li affinity of graphene oxide (GO) to develop a Janus structure comprising a top GO layer and a bottom reduced graphene oxide (rGO) layer. The progressive conductivity and lithiophilicity gradient structure of GO/rGO enables a bottom-up Li deposition mode, rendering an average Coulombic efficiency of 99.1 % over 350 cycles at 1 mA cm−2 and 1 mAh cm−2. Full cells equipped with a LiFePO4 cathode maintain a capacity retention of 85 % after 350 cycles at 1 C. This innovative approach provides fresh insights into the development of graphene-based hosts, offering significant potential for future Li metal battery applications.

Microstructural evolution of Fe-25 W powder beds during CO2-H2 redox cycling at 800 °C

Fixed powder beds of Fe-25 W at% powders show excellent resistance to degradation during CO2-H2 redox cycling at 800 °C, releasing CO and H2O, respectively, with 100 % metal utilization. During cycling up to 165 full redox cycles (∼500 h), the reaction kinetics improve with cycle number and a stable, hierarchically-porous microstructure forms that shows neither sintering nor densification. The sintering inhibition provided by W addition to Fe stems from the formation of Fe-W mixed phases: as an intermetallic compound (Fe2W) in the reduced state and as a ternary oxide (FeWO4) in the oxidized state. In addition to the large channels running between coarse (100 µm) powder agglomerates, each agglomerate in the powder bed shows both microporosity due to sintering inhibition, and submicron porosity due to a chemical vapor transport reduction mechanism that is active when FeWO4 is reduced by H2 at high temperature. This hierarchical porosity enables fast reactions due to the short diffusion distance to free surfaces, and non-tortuous gas flow through the powder bed. As a result, under high CO2 flow, the CO2:CO ratio is sufficiently high to oxidize Fe3O4 to Fe2O3, improving the CO conversion capability on a per-mole basis.

Sulfur-doped pomegranate-like carbon microclusters designed via facile spray-drying process: A novel anode material for potassium-ion batteries

Recent research has demonstrated increasing inclination toward employing hollow carbons featuring nanoscale amorphous structures as anodes in potassium-ion batteries. However, these amorphous structures detrimentally impact the electrode’s electron and ion conductivities, leading to subpar rate performance. Additionally, integrating nanoparticles into electrodes typically yields an uneven distribution, owing to the propensity of nanomaterials to readily aggregate. To address these challenges, S-doped pomegranate-like carbon microclusters (S-PCMs) comprising S-doped primary hollow carbon spheres (HCSs) were synthesized via spray drying. The effects of self-assembly and S doping on the morphological structure and potassium storage performance of the HCS materials were systematically investigated through comprehensive analyses. PCMs mitigated volume expansion and imparted high conductivity and charge/discharge rates owing to short potassium-ion diffusion distances, while the self-assembled nanospheres improved slurry flow properties. Additionally, sulfur doping increased the pore size, interlayer spacing, and number of defect sites in the carbon lattice, improving electron mobility. The resulting S-PCMs exhibited exceptional potassium storage properties, particularly cycling performance (224 mA h g−1 at the 1000th cycle). Furthermore, various electrochemical tests attributed S-PCM’s enhanced potassium storage performance to the numerous active sites and increased resistance to charge transfer, improving the potassium diffusion coefficient.

Nanohybrid-Based Redox Homeostasis Perturbators Escaped from Early Lysosomes toward Amplified Sensitization of Tumor Cells and Photothermally Maneuvered Pyroptosis Therapy.

Reactive oxygen species (ROS) hold great potential in tumor pyroptosis therapy, yet they are still limited by short species lifespan and limited diffusion distance. Inducing cells into a metastable state and then applying external energy can effectively trigger pyroptosis, but systemic sensitization still faces challenges, such as limited ROS content, rapid decay, and short treatment windows. Herein, a nanohybrid-based redox homeostasis-perturbator system was designed that synergistically induce early lysosomal escape, autophagy inhibition, and redox perturbation functions to effectively sensitize cells to address these challenges. Specifically, weakly alkaline layered double hydroxide nanosheets (LDH NSs) with pH-responsive degradation properties enabled early lysosomal escape within 4 h, releasing poly(L-dopa) nanoparticles for inducing catechol-quinone redox cycling in the cytoplasm. The intracellular ROS levels were systematically rebounded by 3-4 times in tumor cells and lasted for over 4 h. Subsequently induced lysosomal stress and Ca2+ signaling activation resulted in severe mitochondrial dysfunction, as well as a perilous metastable state. Thereby, sequential near-infrared light was applied to trigger amplified stress through a local photothermal conversion. This led to sufficiently high levels of cleaved caspase-1 and GSDMD activation (2.5-2.8-fold increment) and subsequent pyroptosis response. In addition, OH- released by LDH elevated pH to alleviate the limitation of glutathione depletion by quinones at acidic pH and inhibit protective autophagy. Largely secreted inflammatory factors (2.5-5.6-fold increment), efficient maturation of dendritic cells, and further immune stimulation were boosted for tumor inhibition as a consequence. This study offers a new paradigm and insights into the synergy of internal systematic cellular sensitization and sequential external energy treatment to achieve tumor suppression through pyroptosis.

Effect of annulus ratio on the residence time distribution and Péclet number in micro/milli‐scale reactors

AbstractMicro/milli‐scale annular reactor with straight and helical forms has excellent heat and mass transfer performance due to the short molecular diffusion distance and dual‐wall surface transport. The annular gap spacing is scalable by adjusting the inner and outer tube diameter. The influence of diffusion and convection effects on axial dispersion as expanding the flow scale requires further elucidation with the help of residence time distribution (RTD) curves and Péclet (Pe) numbers. The correlation of RTD characteristics with annulus ratio γ = Dh/D (ratio of annulus characteristic size to outer diameter) is investigated using computational fluid dynamics. Results show that with enlarging the straight annular gap from micro‐scale to milli‐scale, RTD characteristics exhibit opposing patterns. This can be attributed to the transition from diffusion‐dominated to convection‐dominated on momentum transfer, and the transition interval is 0.167 < γ < 0.250. Correlation equations of Pe number with Reynolds (Re) number and γ are established under diffusion‐dominated and convection‐dominated states. The symmetrically distributed secondary flow in the helical annular gap effectively elevates the Pe (Pemax > 100). Correlation equations of Pe with Re and γ are established in helical annular gaps with 0.083 < γ < 0.208 and 0.167 < γ < 0.500. The above results contribute to understanding the annular flow RTD characteristics for better applications of tube‐in‐tube reactors.

Macromolecular Nano-Assemblies for Enhancing the Effect of Oxygen-Dependent Photodynamic Therapy Against Hypoxic Tumors.

In oxygen (O2)-dependent photodynamic therapy (PDT), photosensitizers absorb light energy, which is then transferred to ambient O2 and subsequently generates cytotoxic singlet oxygen (1O2). Therefore, the availability of O2 and the utilization efficiency of generated 1O2 are two significant factors that influence the effectiveness of PDT. However, tumor microenvironments (TMEs) characterized by hypoxia and limited utilization efficiency of 1O2 resulting from its short half-life and short diffusion distance significantly restrict the applicability of PDT for hypoxic tumors. To address these challenges, numerous macromolecular nano-assemblies (MNAs) have been designed to relieve hypoxia, utilize hypoxia or enhance the utilization efficiency of 1O2. Herein, we provide a comprehensive review on recent advancements achieved with MNAs in enhancing the effectiveness of O2-dependent PDT against hypoxic tumors.

Hydrogen Sulfide Delivery System Based on Salting-Out Effect for Enhancing Synergistic Photothermal and Photodynamic Cancer Therapies.

The simultaneous application of photothermal therapy (PTT) and photodynamic therapy (PDT) offers substantial advantages in cancer treatment. However, their synergistic anticancer efficacy is often limited by tumor hypoxia, and thermotolerance induced by high expression of heat shock proteins (HSP). Fortunately, hydrogen sulfide (H2S), known for its direct cytotoxic effect on tumor cells, has been recognized for its ability to enhance PTT and PDT. The effectiveness of H2S in these therapies is challenged by its low loading efficiency, poor stability, and short diffusion distance. To address these issues, a nanoscale emulsion drop template created through the salting-out effect is employed to construct a robust H2S delivery system. Polydopamine (PDA), chosen for its interfacial polymerization tendency and excellent photothermal conversion rate, is utilized as a carrier for the H2S donor (ADT) and Zinc phthalocyanine (ZnPc) to fabricate a novel nanomedicine termed APZ NPs. The temperature-responsive APZ NPs are designed to release H2S during the PTT process. Elevated H2S levels promoted vasodilation, thereby enhancing the enhanced permeability and retention effect (EPR) of APZ NPs within solid tumors. This strategy effectively alleviated tumor hypoxia by disrupting the mitochondrial respiratory chain and mitigated tumor cell heat tolerance by inhibiting HSP expression.

Cell Wall Binding Strategies Based on Cu3SbS3 Nanoparticles for Selective Bacterial Elimination and Promotion of Infected Wound Healing.

Utilizing nanomaterials as an alternative to antibiotics, with a focus on maintaining high biosafety, has emerged as a promising strategy to combat antibiotic resistance. Nevertheless, the challenge lies in the indiscriminate attack of nanomaterials on both bacterial and mammalian cells, which limits their practicality. Herein, Cu3SbS3 nanoparticles (NPs) capable of generating reactive oxygen species (ROS) are discovered to selectively adsorb and eliminate bacteria without causing obvious harm to mammalian cells, thanks to the interaction between O of N-acetylmuramic acid in bacterial cell walls and Cu of the NPs. Coupled with the short diffusion distance of ROS in the surrounding medium, a selective antibacterial effect is achieved. Additionally, the antibacterial mechanism is then identified: Cu3SbS3 NPs catalyze the generation of O2•-, which has subsequently been conversed by superoxide dismutase to H2O2. The latter is secondary catalyzed by the NPs to form •OH and 1O2, initiating an in situ attack on bacteria. This process depletes bacterial glutathione in conjunction with the disruption of the antioxidant defense system of bacteria. Notably, Cu3SbS3 NPs are demonstrated to efficiently impede biofilm formation; thus, a healing of MRSA-infected wounds was promoted. The bacterial cell wall-binding nanoantibacterial agents can be widely expanded through diversified design.

Construction of Pickering emulsion and its application in enzymatic synthesis of phytosteryl oleate

In this study, Janus nanoparticles were prepared and used to construct Pickering emulsion as an emulsifier in presence of lipase. The results showed that Janus nanoparticles could be used to stable water phase in emulsion and the average particle size of emulsion was 60 μm. Phytosterol ester was successfully synthesized in Pickering emulsion catalytic system by using oleic acid as acyl accepter, and the phytosterol conversion reached 91.65 ± 2.07% under the following conditions: emulsifier amount of 1.0 wt%, oil-water ratio of 6:1, phytosterol concentration of 110 mmol/L, lipase dosage of 20 g/L, reaction temperature of 45 °C. Compared with biphasic catalytic system, Pickering emulsion catalytic system could enhance the catalytic efficiency and shorten the reaction time due to large interface area and short molecule diffusion distance. At the end of reaction, Janus nanoparticles could be recovered by simple centrifugation, the relative activity of lipase remained 72.89 ± 1.83% after repeated use for 6 times. Overall, this paper provides a novel and high efficiency interfacial biocatalysis technique for the synthesis of phytosteryl oleate.

A multi-kernel-shell indium selenide@carbon nanosphere enabling high-performance lithium-ion batteries

Indium selenide has garnered significant attention for high volumetric capacities, but is currently plagued by the sluggish charge transfer kinetics, severe volume effect, and rapid capacity degradation that hinder their practical applications. Herein, we design, synthesize, and characterize a multi-kernel-shell structure comprised of indium selenide encapsulated within carbon nanospheres (referred to as m-K-S In2Se3@C) through an integrated approach involving a hydrothermal method followed by a gaseous selenization process. Importantly, experimental measurements and density functional theory calculations confirm that the m-K-S In2Se3@C not only improve the adsorption capability for Li-ions but also lower the energy barrier for Li-ions diffusion. Profiting from numerous contact points, shorter diffusion distances and an improved volume buffering effect, the m-K-S In2Se3@C achieves an 800 mA h g−1 capacity over 1000 loops at 1000 mA g−1, a 520 mA h g−1 capacity at 5000 mA g−1 and an energy density of 270 Wh kg−1 when coupled with LiFePO4, surpassing most related anodes reported before. Broadly, the m-K-S structure with unique nano-micro structure offers a new approach to the design of advanced anodes for LIBs.

In-situ synthesis of coral reef-like synergistic zinc cobalt oxide and zinc manganese oxide composite as a battery-type electrode material for supercapacitors

Recently, in-situ preparation of metal oxide composite structures has gained much importance in fabricating electrode materials for energy storage and conversion devices because of its advantageous properties of beneficial interfacial contact, high conductivity, good synergism, short ion diffusion distance, better electrochemical performance, etc. Binary transition metal oxides (BTMOs) are given great attention for their significant electrochemical performances over primary MOs because of the two metal ions with different valent states for the redox reactions. In this study, we synthesize zinc cobalt oxide (ZnCo2O4) and zinc manganese oxide (ZnMn2O4) composite via a solvothermal synthetic method. The existence of both phases is identified using an X-ray diffraction analysis (XRD). The unique coral reef-like structures of the composite electrode are analysed via field emission scanning electron microscopy, and the nanostructure was identified using transmission electron microscopy. The X-ray photoelectron spectroscopy confirms the surface oxidation states of the composite and supports the XRD analysis. The synergetic composite electrode provides a large surface area of 50.86 m2 g−1 with many pores. The composite electrode has a specific capacity of 250 C g−1 at 1 A g−1. The ZCO/ZMO composite demonstrated impressive stability, retaining a specific capacity of 180 C g−1 at 6 A g−1 over 5000 cycles.

Simply-prepared hollow covalent organic framework as a dual-function platform for detection and removal of multiple heavy metal ions

Covalent organic frameworks (COFs) show great advantage in heavy metal ions detection and removal due to their large specific surface area, high porosity, excellent stability, and abundant functional sites. While current research primarily focuses on the influence of COF composition on detection and adsorption performance, the influence of COF′s morphology is often overlooked. In this study, a hollow structured TB-HCOF was developed through simple amorphous-to-crystalline transformation strategy involving the reaction between 1,3,5-Tris (4-aminophenyl) benzene (TAPB) and 1,3,5-benzenetricarbaldehyde (BTCA). TB-HCOF combine the advantages of COFs with the unique properties of hollow structure, such as an enlarged surface area, shortened diffusion distance, and easily accessible functional sites. It exhibited exceptional adsorption performance for heavy metal ions with the maximum adsorption capacities of 766.28 mg·g−1 for Pb2+, 759.32 mg·g−1 for Cu2+, and 640.83 mg·g−1 for Hg2+. Additionally, yolk-shell Pt nanoparticles@TB-HCOF was designed as an electrochemical sensing platform for heavy metal ions detection. Thanks to the synergistic effect between TB-HCOF with exceptional adsorption capacity and Pt nanoparticles with remarkable electrical conductivity, the sensor displayed awesome detection performance toward Pb2+, Cu2+ and Hg2+ with low limits of detection of 0.11 ng·L-1. These findings highlight the potential of simply-prepared hollow COFs as a promising material for managing heavy metal ions pollution.

Electrochemical oxidation of ammonia in water by Pt/NbC membrane-based catalytic nanofluid reactor

Electrochemical oxidation has garnered increasing attention for its potential in treating ammonia in wastewater. However, achieving both high conversion and high nitrogen selectivity simultaneously, while maintaining a short hydraulic retention time (HRT), remains a significant challenge. In this study, we constructed an efficient niobium carbide (NbC) nanoporous membrane reactor by incorporating metal platinum as a catalyst for the electrochemical oxidation of ammonia. The electrocatalytic oxidation process occurred within the nanochannels of the membrane. This design allowed for enhanced single-pass removal of ammonia due to the short diffusion distance on the nanometer scale, which subsequently increased the mass transfer efficiency. Remarkably, we achieved highly controllable pore sizes in the NbC membrane, ranging from 200 to 8.3 nm by dip-coating method. Without the addition of any oxidants, the single-pass removal of ammonia reached 100 % when the applied potential was set at 4 V vs. SCE on a membrane with a pore size of 8.3 nm, and an HRT of 249 s. The primary product obtained from this process was nitrogen, displaying a selectivity of 88.09 %, with a small percentage of nitrate production (selectivity of 11.91 %). By decreasing the applied potential or increasing the pore size, the selectivity of nitrogen can be further improved, reaching 100 %. However, this adjustment may lead to a decrease in the conversion of ammonia. DFT results have revealed that the production of nitrogen on the Pt (111) surface occurs through the NH4+→NH3 → NH2 → N → N2 pathway. This finding contributes to the understanding of the electrochemical process for ammonia removal in water, and provides a viable option for the design of efficient nanomembrane reactors.

Quantifying effects of surface morphology and functional groups of carbon fibers on mass transfer coefficient in vanadium redox flow batteries

Optimization of porous electrodes has emerged as a fascinating alternative to improve the power density of redox flow batteries. While numerous studies have demonstrated the significant reduction in overpotentials due to electrode modifications, there has yet to be research that elucidates the underlying mechanism. The developed fitting model in the present study enables efficient mass transfer coefficient characterization for redox flow battery systems with sluggish reactants. Based on the newly proposed fitting model and experimental data, the present study explores the mechanism of how changes in electrode morphology and functional groups affect the mass transfer coefficient. It is found that micro-scale pores on the fiber surface, when fibers were thermally treated at 300 °C, successfully enhanced mass transfer of the reactants in the electrode likely owing to the shortened diffusion distance, while nano-scale pores, when fibers thermally treated at 400 °C, showed minor effects on mass transfer enhancement. Besides, the increment of the oxygen containing functional groups also enhanced the mass transfer rate in the diffusion layer likely attributable to the improved electrode hydrophilicity. Last, the power-law correlations for Sherwood number and Reynolds number for different electrode samples were established, enabling frontend screening in future's electrode development campaigns.

Trap & kill: a neutrophil-extracellular-trap mimic nanoparticle for anti-bacterial therapy.

Fenton chemistry-mediated antimicrobials have demonstrated great promise in antibacterial therapy. However, the short life span and diffusion distance of hydroxyl radicals dampen the therapeutic efficiency of these antimicrobials. Herein, inspired by the neutrophil extracellular trap (NET), in which bacteria are trapped and agglutinated via electronic interactions and killed by reactive oxygen species, we fabricated a NET-mimic nanoparticle to suppress bacterial infection in a "trap & kill" manner. Specifically, this NET-mimic nanoparticle was synthesized via polymerization of ferrocene monomers followed by quaternization with a mannose derivative. Similar to the NET, the NET-mimic nanoparticles trap bacteria through electronic and sugar-lectin interactions between their mannose moieties and the lectins of bacteria, forming bacterial agglutinations. Therefore, they confine the spread of the bacteria and restrict the bacterial cells to the destruction range of hydroxyl radicals. Meanwhile, the ferrocene component of the nanoparticle catalyzes the production of highly toxic hydroxyl radicals at the H2O2 rich infection foci and effectively eradicates the agglutinated bacteria. In a mouse model of an antimicrobial-resistant bacteria-infected wound, the NET-mimic nanoparticles displayed potent antibacterial activity and accelerated wound healing.

Tandem molecular intercalation exfoliated TiSe2 nanosheets for enhanced sodium-ion storage

Although layered transition metal dichalcogenides (TMDs) possess relatively high electrical and moderate ionic conductivities, their inclination to stack layered structure inevitably leads to a sluggish ion diffusion and limited cyclic life when used as anode materials. Therefore, the realization of few-layered structure with widened layer distance would facilitate the ion migration and thus help TMDs to gain enhanced performance. In this study, tandem molecular intercalation method was applied to fabricate few-layered TiSe2 nanosheets (ef-TiSe2) with pronounced expanded layer spacing (∼10 Å) using propylamine and hexylamine as intercalators. Density functional theory calculations disclose that there is a continuous charge accumulation between the TiSe2 interlayers, which enables Na+ to exhibit a strong adsorption tendency, thus forming a certain Coulombic force. Furthermore, the lowest Na+ diffusion barrier between interlayers guarantees TiSe2 to achieve rapid reaction kinetics. The effective exfoliation strategy renders the obtained ef-TiSe2 rich exposed reaction active sites, sufficient electrolyte penetration, shortened diffusion distance of ion/electron, suppressed stress caused by structural changes, and increased effective utilization of the material. Interestingly, compared with bulk TiSe2, few-layered ef-TiSe2 nanosheets exhibited a shorter activation cycling period, lower reaction polarization, and expedited reaction kinetics, therefore providing a high specific capacity (417 mA h g−1 at 1 A g−1) and cyclic stability (with a high-capacity retention of 95.36 % after 2000 cycles at 5 A g−1). In addition, the combined mechanism of intercalation and conversion in TiSe2 was closely elucidated by in situ X-ray diffraction and in situ electrochemical impedance spectroscopy.

Construction of FeSbO4-Sb2O4 hetero-nanocrystals anchored on reduced graphene oxide sheets for superior lithium and sodium storage

Antimony-based oxides with conversion-alloying/dealloying mechanism have attracted great attentions as alternative anode materials for lithium/sodium-ion batteries due to their high theoretical capacities. However, slow reaction kinetics, inherent poor conductivity and large volume change severely inhibit their practical application. Herein, a novel composite with FeSbO4-Sb2O4 hetero-nanocrystals anchored on reduced graphene oxide (rGO) sheets is designed and successfully constructed by a facile solvothermal method. The intense interaction between Fe3+ and Sb5+ oxidized from Sb3+ by graphene oxide (GO) boosts priority formation of rutile FeSbO4 nanoparticles. And the excess Sb3+ and Sb5+ subsequently generate nano-sized cervantite Sb2O4 to form FeSbO4-Sb2O4 hetero-interface. Such unique structure not only can enhance electrical conductivity and structural stability of electrode, but also shorten diffusion distance of lithium/sodium ions during discharge/charge processes. Moreover, the in-situ generated Fe during electrochemical reaction can boost lithium/sodium release from Li2O/Na2O. Attributed to the unique structure, the as-obtained FeSbO4-Sb2O4/rGO-200 electrode delivers greatly improved electrochemical performance for both lithium and sodium storage, including large reversible capacities, high rate capability, and superior long-term cycling stability. This work provides an efficient route to rationally design and synthesize hetero-structural composites boosting lithium-/sodium-storage properties.

Fabrication and conductivity of zirconium doped Li2TiO3 tritium breeder

The tritium diffusion rate of the tritium breeder is one of the main factors affecting the Deuterium–Tritium (DT) nuclear fusion. In the paper, the zirconium ion (Zr4+)-doped Li2TiO3 tritium breeder with a small grain size of 0.66 μm was successfully prepared at a high temperature of 950 °C. Zr4+-doping could inhibit grain growth of Li2TiO3, which benefited from the effect of segregating, pinning, and dragging to the Li2TiO3 grain boundary. Then, the conductivity was innovatively used to indirectly and rapidly evaluate the tritium release property of Zr4+-doped Li2TiO3. The results show that the short lithium-ion diffusion distance for the small-grained Zr4+-doped Li2TiO3 decreases bulk resistance, and the abundant interfaces enhance grain boundary conductivity. Besides, the zirconium (Zr) dopant increases the cell volume of Li2TiO3, which provides a broader channel for the diffusion of lithium ion. It indirectly illustrates that the Zr4+-doped Li2TiO3 with small grains has better tritium release performance than the Li2TiO3 with large grains. The results would provide new insights into the Zr doping to accelerate tritium diffusion on the Li2TiO3 surface.