Shoot Samples Research Articles

Early cone setting in Picea abies acrocona is associated with increased transcriptional activity of a MADS box transcription factor.

Conifers normally go through a long juvenile period, for Norway spruce (Picea abies) around 20 to 25 years, before developing male and female cones. We have grown plants from inbred crosses of a naturally occurring spruce mutant (acrocona). One-fourth of the segregating acrocona plants initiate cones already in their second growth cycle, suggesting control by a single locus. The early cone-setting properties of the acrocona mutant were utilized to identify candidate genes involved in vegetative-to-reproductive phase change in Norway spruce. Poly(A(+)) RNA samples from apical and basal shoots of cone-setting and non-cone-setting plants were subjected to high-throughput sequencing (RNA-seq). We assembled and investigated 33,383 expressed putative protein-coding acrocona transcripts. Eight transcripts were differentially expressed between selected sample pairs. One of these (Acr42124_1) was significantly up-regulated in apical shoot samples from cone-setting acrocona plants, and the encoded protein belongs to the MADS box gene family of transcription factors. Using quantitative real-time polymerase chain reaction with independently derived plant material, we confirmed that the MADS box gene is up-regulated in both needles and buds of cone-inducing shoots when reproductive identity is determined. Our results constitute important steps for the development of a rapid cycling model system that can be used to study gene function in conifers. In addition, our data suggest the involvement of a MADS box transcription factor in the vegetative-to-reproductive phase change in Norway spruce.

Proteome Analysis in Arabidopsis Reveals Shoot- and Root-Specific Targets of Cytokinin Action and Differential Regulation of Hormonal Homeostasis

The plant hormones cytokinins (CKs) regulate multiple developmental and physiological processes in Arabidopsis (Arabidopsis thaliana). Responses to CKs vary in different organs and tissues (e.g. the response to CKs has been shown to be opposite in shoot and root samples). However, the tissue-specific targets of CKs and the mechanisms underlying such specificity remain largely unclear. Here, we show that the Arabidopsis proteome responds with strong tissue and time specificity to the aromatic CK 6-benzylaminopurine (BAP) and that fast posttranscriptional and/or posttranslational regulation of protein abundance is involved in the contrasting shoot and root proteome responses to BAP. We demonstrate that BAP predominantly regulates proteins involved in carbohydrate and energy metabolism in the shoot as well as protein synthesis and destination in the root. Furthermore, we found that BAP treatment affects endogenous hormonal homeostasis, again with strong tissue specificity. In the shoot, BAP up-regulates the abundance of proteins involved in abscisic acid (ABA) biosynthesis and the ABA response, whereas in the root, BAP rapidly and strongly up-regulates the majority of proteins in the ethylene biosynthetic pathway. This was further corroborated by direct measurements of hormone metabolites, showing that BAP increases ABA levels in the shoot and 1-aminocyclopropane-1-carboxylic acid, the rate-limiting precursor of ethylene biosynthesis, in the root. In support of the physiological importance of these findings, we identified the role of proteins mediating BAP-induced ethylene production, METHIONINE SYNTHASE1 and ACC OXIDASE2, in the early root growth response to BAP.

Natural occurrence of aflatoxin in green leafy vegetables

Natural occurrence of aflatoxin (AF) in agricultural soils, green leafy vegetables (GLVs) and persistence in processed foods was investigated. in total 33 soil samples and 81 GLVs which belonged to 9 groups collected from nine vegetable-growing regions were studied. Seventy percent of soils and 69.2% GLVs were contaminated with AF ranging from 0.0 to 88ppb. Root samples frequently had higher concentration of AFB1 in comparison with shoot samples. Under greenhouse conditions all the tested plants were found to take up AF. From xylem and phloem sap experiments it was clear that AF was gaining entry into the plant system via water-conducting xylem tissue and was translocated to aerial plant parts, with subsequent entry into the phloem. Of the two cooking methods studied, pressure cooking of GLVs significantly reduced the AF level in comparison with ordinary boiling.

The effect of combined salinity and waterlogging on the halophyte Suaeda maritima: The role of antioxidants

Suaeda maritima is a halophytic plant and its habitat is salt marsh. In order to adapt to saline or waterlogged conditions, plants have evolved mechanisms that include antioxidant protection. However, the combined effect of salinity and waterlogging on antioxidants in S. maritima is unknown. The aim of this study was therefore to investigate the effect of saline-flooding on levels of glutathione and phenolic compounds (antioxidants) and the correlation between their concentration and activity in S. maritima shoots grown in their natural habitat and in a glasshouse.Shoots were collected from two different elevations (and so different degrees of flooding) of a salt marsh while other plants were grown in half strength seawater in the controlled conditions of a glasshouse for 8 weeks (drained and flooded). Shoot samples were used to measure dry weight, glutathione and its reduction state, malonyldialdehyde content (MDA), polyphenol content, superoxide anion and 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH) scavenging activity in the shoots of S. maritima.Growth of S. maritima was greater in plants growing on the high marsh than at a lower elevation and in drained medium as opposed to waterlogged conditions in the glasshouse. Waterlogging caused an increase in glutathione and its reduction state. The glutathione half-cell redox potential (EGSSG/2GSH) was more negative in plant shoots grown under waterlogged conditions than in plants grown under normal conditions. Higher DPPH and superoxide anion scavenging activity was associated with high antioxidant concentrations (glutathione and polyphenols).Conclusions. Under saline-flooded conditions in the field and in the glasshouse, plants produced a higher concentration of antioxidants than under drained conditions. These result indicated that antioxidant molecules play an important role in S. maritima plants under combined salinity and waterlogging stress.

Phytotoxic Effect, Uptake, and Transformation of Biochanin A in Selected Weed Species

Certain isoflavones are plant growth inhibitors, and biochanin A is a major isoflavone in clover species used for weed management. The effect of biochanin A on the monocot weed species Echinochloa crus-galli L. and Lolium perenne L. and dicot species Silene noctiflora L., Geranium molle L., and Amaranthus caudatus L. was evaluated in agar medium bioassays. S. noctiflora and G. molle root growth was progressively inhibited with increasing concentrations of biochanin A, whereas the monocot species were unaffected. With regard to the dicot species, S. noctiflora (EC(50) = 35.80 μM and EC(25) = 5.20 μM) was more susceptible than G. molle (EC(50), EC(25) > 400 μM). S. noctiflora, G. molle, and E. crus-galli root and shoot samples, representing a susceptible, a less susceptible, and a nonsusceptible species, respectively, were analyzed by LC-MS to quantify biochanin A and its transformation products. Biochanin A and its known transformation products genistein, dihydrobiochanin A, pratensein, and p-coumaric acid were quantified. Sissotrin was identified and quantified while assigning unknown peaks. The treated root samples contained more biochanin A, genistein, pratensein, and dihydrobiochanin A than shoot samples.

Influence of sodium chloride on the regulation of Krebs cycle intermediates and enzymes of respiratory chain in mungbean (Vigna radiata L. Wilczek) seedlings

The effect of common salt (NaCl) on ion contents, Krebs cycle intermediates and its regulatory enzymes was investigated in growing mungbean (Vigna radiata L. Wilczek, B 105) seedlings. Sodium and chloride ion contents increased in both root and shoot whereas potassium ion content decreased in shoot of test seedlings with increasing concentrations of NaCl. Organic acids like pyruvate and citrate levels increased whereas malate level decreased under stress in both roots and shoots. Salt stress also variedly affected the activities of different enzymes of respiratory chain. The activity of pyruvate dehydrogenase (E.C. 1.2.4.1) decreased in 50mM NaCl but increased in 100mM and 150mM concentrations, in both root and shoot samples. Succinate dehydrogenase (E.C. 1.3.5.1) activity was reduced in root whereas stimulated in shoot under increasing concentrations of salt. The activity of isocitrate dehydrogenase (E.C. 1.1.1.41) and malate dehydrogenase (E.C. 1.1.1.37) decreased in both root and shoot samples under salt stress. On the contrary, pretreatment of mungbean seeds with sublethal dose of NaCl was able to overcome the adverse effects of stress imposed by NaCl to variable extents with significant alterations of all the tested parameters, resulting in better growth and efficient respiration in mungbean seedlings. Thus, plants can acclimate to lethal level of salinity by pretreatment of seeds with sublethal level of NaCl, which serves to improve their health and production under saline condition, but the sublethal concentration of NaCl should be carefully chosen.

Exploring element accumulation patterns of a metal excluder plant naturally colonizing a highly contaminated soil

This work investigates the element distribution in Silene paradoxa growing on the mine dump of Fenice Capanne (Tuscany, Italy). The accumulation of As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn in root apoplast and symplast and in shoot was assessed and compared to the levels of the same metals in the respective rizosphere soils, analyzing both the total and the phytoavailable fractions.Levels of As, Cu, Fe, Pb and Zn, were above toxicity thresholds in both soil and shoot samples. Inter- and intra-element correlations were analyzed in plant and soil using different statistical methods. Soil total and phytoavailable metal concentration were shown not to be dominant in determining metal accumulation by the plant, since no significant positive correlation was found between metal concentration in soils and plants. Moreover, results indicated that S. paradoxa was able to cope with the studied multi-metal contaminated soil excluding the elements from its tissues and preferentially accumulating them into the root compartment, thus suggesting this species as possible good candidate for phytostabilization purposes.

Illumination properties and imaging promises of blended, multiple‐scattering seismic data: a tutorial

ABSTRACTIn traditional seismic surveys the firing time between shots is such that the shot records do not interfere in time. In the concept of blended acquisition, however, shot records do overlap, allowing denser source sampling and wider azimuths in an economic way. A denser shot sampling and wider azimuths make that each subsurface gridpoint is illuminated from a larger number of angles and will therefore improve the image quality in terms of signal‐to‐noise ratio and spatial resolution. In this tutorial, we show that, even with very simple blending parameters like time delays, the incident wavefield at a specific subsurface gridpoint represents a dispersed time series with a complex code. For shot record migration purposes, this time series should be designed such that it facilitates a stable inversion process. In a next step, we explain how the illumination property of the incident wavefield can be further improved by utilizing the surface‐related multiples. This means that these multiples can be exploited to improve the incident wavefield by filling angle gaps in the illumination and/or by extending the range of angles (‘natural blending’). In this way the energy contained in the multiples now contributes to the image, rather than decreasing its quality. One remarkable consequence of this property is that the benefits to be obtained from the improved illumination depend on the detector locations in acquisition geometries as well. We explain how to quantify the contribution of the blended surface multiples to the incident wavefield for a blended source configuration. In addition, we explain how blended measurements can be directly used in an angle‐dependent migration process with a bifocal, least‐squares imaging condition. The result is a densely sampled reflectivity function in the ray parameter domain, also improving the capability of velocity estimation. We will show examples to illustrate the theory.

Efficient phytoremediation of uranium mine tailings by tobacco

This investigation shows that tobacco plant roots and leaves accumulate 60 times more uranium than previously reported. Phytoremediation is a convenient technique to clean up polluted soils using herbaceous plants and trees. Increasing research aims to identify novel plant species that accumulate toxic metals. Tobacco plant (Nicotiana tabacum L.) is a promising cultivar for phytoremediation because tobacco is fast growing and easily propagated. Here, we study phytoremediation of uranium by two tobacco varieties Virginia and Burley, bred in natural conditions. Plants were grown on uranium mine tailings with an average uranium content of 15.3 mg kg−1. Each shoot sample was cross-sectioned into five uniform groups of leaves and stem segments. Results show a substantial variance in uranium uptake according to the section elderliness and origin of the plant parts. The highest concentrations of uranium values recorded in leaves of Burleys and Virginias nearest root shoot sections were 4.18 and 3.50 mg kg−1, respectively. These values are 60 times higher rates than those previously published for leaves of cultivars grown under similar conditions. Taking into account the level of soil contamination, the content of accumulated uranium demonstrates uranium hyperaccumulatory properties of tobacco plant and its potential utilization in phytoremediation of uranium-contaminated mediums.

Estimate of Leaf Area Index in an Old-Growth Mixed Broadleaved-Korean Pine Forest in Northeastern China

Leaf area index (LAI) is an important variable in the study of forest ecosystem processes, but very few studies are designed to monitor LAI and the seasonal variability in a mixed forest using non-destructive sampling. In this study, first, true LAI from May 1st and November 15th was estimated by making several calibrations to LAI as measured from the WinSCANOPY 2006 Plant Canopy Analyzer. These calibrations include a foliage element (shoot, that is considered to be a collection of needles) clumping index measured directly from the optical instrument, TRAC (Tracing Radiation and Architecture of Canopies); a needle-to-shoot area ratio obtained from shoot samples; and a woody-to-total area ratio. Second, by periodically combining true LAI (May 1st) with the seasonality of LAI for deciduous and coniferous species throughout the leaf-expansion season (from May to August), we estimated LAI of each investigation period in the leaf-expansion season. Third, by combining true LAI (November 15th) with litter trap data (both deciduous and coniferous species), we estimated LAI of each investigation period during the leaf-fall season (from September to mid-November). Finally, LAI for the entire canopy then was derived from the initial leaf expansion to the leaf fall. The results showed that LAI reached its peak with a value of 6.53 m2 m−2 (a corresponding value of 3.83 m2 m−2 from optical instrument) in early August, and the mean LAI was 4.97 m2 m−2 from May to November using the proposed method. The optical instrument method underestimated LAI by an average of 41.64% (SD = 6.54) throughout the whole study period compared to that estimated by the proposed method. The result of the present work implied that our method would be suitable for measuring LAI, for detecting the seasonality of LAI in a mixed forest, and for measuring LAI seasonality for each species.

Multiscattering illumination in blended acquisition

In traditional seismic surveys, the firing time between shots is such that the shot records do not interfere in time. However, in the concept of blended acquisition, the records do overlap, allowing denser source sampling and wider azimuths in an economic way. A denser shot sampling and wider azimuths make that each subsurface gridpoint is illuminated from a larger number of angles and will therefore improve the image quality in terms of signal-to-noise ratio and spatial resolution. We show that — even with very simple blending parameters like time delays — the incident wavefield at a specific subsurface gridpoint represents a dispersed time series with a “complex code”. For shot-record migration purposes, this time series must have a stable inverse. In a next step, we show that the illumination can be further improved by utilizing the surface-related multiples. This means that these multiples can be exploited to improve the incident wavefield by filling angle gaps in the illumination and/or by extending the range of angles. In this way, the energy contained in the multiples now contributes to the image, rather than decreasing its quality. One remarkable consequence of this property is that the benefits to be obtained from the improved illumination depend on the detector locations in acquisition geometries as well. We show how to quantify the contribution of the blended surface multiples to the illuminating wavefield for a blended source configuration. Results confirm that the combination of blending and multiple scattering increases the illumination energy and, therefore, will improve the quality of shot-record migration results beyond today’s capability.

Common-angle image gathers for shot-profile migration: an efficient and stable strategy

Shot-profile-based prestack depth migration is quite attractive for sparse-shot wide-azimuth geometries. Meanwhile, angle-domain common image gathers (ADCIGs) have become an essential tool in seismic processing (e.g. velocity analysis). In this paper, we first revisit the popular schemes of generating ADCIGs by wavefield continuation migration. Then we present an alternative approach to produce common-angle image gathers after shot-profile migration based on a one-way wave equation. The angle information is obtained from a division of two images: the conventional image and the angle-weighted image. The effects of sparse shot sampling on extracting ADCIGs have been investigated. Numerical results demonstrate that the described scheme is efficient and stable and can handle the problem of shot-aliasing well.

Microstructure modifications of silicates induced by the collection in aerogel: Experimental approach and comparison with Stardust results

Abstract– Particles from comet 81P/Wild 2 were captured with silica aerogel during the flyby Stardust mission. A significant part of the collection was damaged during the impact at hypervelocity in the aerogel. In this study, we conducted impact experiments into aerogel of olivine and pyroxene powder using a light‐gas gun in similar conditions as that of the comet Wild 2 particles collection. The shot samples were investigated using transmission electron microscopy to characterize their microstructure. Both olivine and pyroxene samples show evidence of thermal alteration due to friction with the aerogel. All the grains have rounded edges after collection, whereas their shape was angular in the initial shot powder set. This is probably associated with mass loss of particles. The rims of the grains are clearly melted and mixed with aerogel. The core of olivine grains is fairly well preserved, but some grains contain dislocations in glide configuration. We interpret these dislocations as generated by the thermal stresses that have emerged due to the high temperature gradients between the core and the rim of the grains. Most of the pyroxene grains have been fully melted. Their high silica concentration reflects a strong impregnation with melted aerogel. The preferential melting of pyroxene compared with olivine is due to a difference in melting temperatures of 300°. This melting point difference probably induces a bias in the measurements of the ratio olivine/pyroxene in the Wild 2 comet. The proportion of pyroxene was probably higher on Wild 2 than expected from the samples collected into aerogel.

Behavioral responses for evaluating the attractiveness of specific tea shoot volatiles to the tea green leafhopper, Empoaca vitis

Abstract The tea green leafhopper, Empoasca vitis Göthe, is one of the most serious insect pests of tea plantations in mainland China. Over the past decades, this pest has been controlled mainly by spraying pesticides. Insecticide applications not only have become less effective in controlling damage, but even more seriously, have caused high levels of toxic residues in teas, which ultimately threatens human health. Therefore, we should seek a safer biological control approach. In the present study, key components of tea shoot volatiles were identified and behaviorally tested as potential leafhopper attractants. The following 13 volatile compounds were identified from aeration samples of tea shoots using gas chromatography‐mass spectrometry (GC‐MS): (E)‐2‐hexenal, (Z)‐3‐hexen‐1‐ol, (Z)‐3‐hexenyl acetate, 2‐ethyl‐1‐hexanol, (E)‐ocimene, linalool, nonanol, (Z)‐butanoic acid, 3‐hexenyl ester, decanal, tetradecane, β‐caryophyllene, geraniol and hexadecane. In Y‐tube olfactometer tests, the following individual compounds were identified: (E)‐2‐hexenal, (E)‐ocimene, (Z)‐3‐hexenyl acetate and linalool, as well as two synthetic mixtures (called blend 1 and blend 2) elicited significant taxis, with blend 2 being the most attractive. Blend 1 included linalool, (Z)‐3‐hexen‐1‐ol and (E)‐2‐hexenal at a 1 : 1 : 1 ratio, whereas blend 2 was a mixture of eight compounds at the same loading ratio: (E)‐2‐hexenal, (Z)‐3‐hexen‐1‐ol, (Z)‐3‐hexenyl acetate, 2‐penten‐1‐ol, (E)‐2‐pentenal, pentanol, hexanol and 1‐penten‐3‐ol. In tea fields, the bud‐green sticky board traps baited with blend 2, (E)‐2‐hexenal or hexane captured adults and nymphs of the leafhoppers, with blend 2 being the most attractive, followed by (E)‐2‐hexenal and hexane. Placing sticky traps baited with blend 2 or (E)‐2‐hexenal in the tea fields significantly reduced leafhopper populations. Our results indicate that the bud‐green sticky traps baited with tea shoot volatiles can provide a new tool for monitoring and managing the tea leafhopper.

Soil and plant contamination by lead mining in Bellmunt (Western Mediterranean Area)

Galena has been mined in Bellmunt (Priorat, Western Mediterranean Area) since ancient times until 1972. While sediment pollution originated by the mining activity in the Ebro River passing the region has been investigated to some extent, the local impact on soils and plants has received poor attention. Here we report first results on the concentrations of major metal contaminants and antimony in soils and representative plants from four selected sites with different pollutant burdens around the mining area. Total (HNO3, HF digest) soil concentrations were analysed. Soils had alkaline pH (8.0±0.2), organic matter contents ranging from 8 to 24gkg−1, and a sandy-loam or a loamy-sand texture. Present study highlighted that metal accumulation in different plants varied with species, tissues and metals. All analysed plant species showed enhanced root and shoot concentrations of Cu, Pb, Zn, and Sb when growing on the more polluted soils and all, but one, restricted the translocation of metals from roots to shoots exhibiting shoot/root concentration ratios lower or close to unity. A notably exception was Moricandia moricandioides (Boiss.) Heyw. [M. ramburii Webb] where shoot/root Zn concentration ratios up 5.5 were observed. This metal accumulation pattern was only observed for Zn and not for other analysed metal contaminants. The concentrations of other, poorly mobile metals, like Pb or Cu were always higher in roots than in shoots (e.g. Pb shoot/root ratios ranged from 0.13 to 0.24). Taking into account the high Pb burden of the soil samples and these low shoot/root Pb ratios, it can be excluded that the particular Zn accumulation pattern of M. moricandioides was biased by soil contamination of shoot samples. To our best knowledge this is the first report of Zn accumulation behaviour in a Moricandia species. The soil-to-shoot transfer factors (SAF) for this species were, however, relatively low ranging from 0.2 to 1.3. Further studies are required to confirm the possible Zn-accumulator character of M. moricandioides.

Sampling of Cacopsylla pyri (Hemiptera: Psyllidae) and Pilophorus gallicus (Hemiptera: Miridae) in Pear Orchards

The psyllid Cacopsylla pyri L. (Hemiptera: Psyllidae), is one of the principal pests of pear (Pyrus spp.) orchards and, along with its natural enemies, needs to be carefully monitored for correct integrate pest management and biological pest control decision making. We compare sampling techniques and develop sampling methods for C. pyri and Pilophorus gallicus Remane (Heteroptera: Miridae). Four pear orchards were sampled periodically from 2007 to 2010 in southern Spain by beating branches into funnels or 45-cm-diameter nets and taking shoot samples. Different sampling techniques were compared, and several sampling methods were assayed for adults and nymphs of C. pyri and P. gallicus. Psylla adult and P. gallicus counts in the nets and funnels were similar and closely correlated. Counts of C. pyri adults in the funnels and nets were higher than on shoots, but all measures were closely correlated. The number of nymphs on shoots and leaves was correlated, as were the counts on leaves within shoots. A guide for choosing the sampling unit in cost/precision terms is given. C. pyri nymphs and adults showed an aggregated distribution, whereas P. gallicus had a less-crowded spatial distribution. Enumerative sequential sampling was evaluated for both insects by using the different sampling techniques by resampling experimental data. The negative binomial distribution fitted the experimental data gathered using the different sampling techniques for C. pyri adults and P. gallicus. The use of binomial sampling is discussed for the two insects and the costs involved are compared with those implied in the sequential enumerative method.

Potential Cultivation of Hordeum Vulgare L. in Soils With High Mercury Background Concentrations

Experimental work was carried out under close-to-real conditions to study mercury uptake by Hordeum vulgare L. cultivated in lysimeter experiments. The soil in the lysimeter experiment was obtained from a test plot located near Almadén (Spain) and had a mean mercury content of 22.9 mg kg−1. A sequence of four crops was sown starting in autumn 2000 and repeated on a yearly basis until 2004. The first crop was grown in the field prior to the extraction of 5 one-cubic-meter lysimeters. The succeeding crops were sown in the lysimeter experiments at the CIEMAT Research Centre (Madrid, Spain). Samples of root and shoot were obtained during the four seasons. Concentrations of mercury at plant maturity in roots vary between 1 and 3 mg kg−1 and in straw and grain the concentrations range from 72 to 480 μg kg−1 and from 5 to 257 μg kg−1, respectively. In order to assess the potential risk for human health and animal feed, an evaluation of the mercury content in the edible part of the crop has been carried out. According to legislation, there is no human health intoxication risk with a balanced consumption; otherwise, the forage use would have to be controlled.

NUTRIENT UPTAKE, SOIL AND PLANT NUTRIENT CONTENTS, AND YIELD COMPONENTS OF WHEAT PLANTS UNDER DIFFERENT PLANTING SYSTEMS AND VARIOUS IRRIGATION FREQUENCIES

The effects of seed bed shaping on nutrient variation in soil and plant under two different irrigation intervals were investigated on wheat (Triticum asetivum L.) plants with a split plot design in a field plot in Zahak Agricultural Research Station in Sistan province in 2005. Irrigations after 80 and 160 mm evaporation from class A evaporation pan were used as main plots. Flat surface irrigation, single, triple, and 6-row beds with four replications were subplots. Total soil nitrogen (N), available phosphorus (P), potassium (K), calcium (Ca), magnesium (Mg), and sodium (Na) were measured in a 30 cm depth top layer at five sampling times. Shoot samples were analyzed for N, P, K, Ca, Mg and Na. Results showed that the 3-row and the 6-row beds with more frequent irrigation (shorter irrigation interval) increased soil solution sodium content in beds resulting in increased plant sodium absorption. With the 3-row and the 6-row beds, increased solution sodium concentration in soil increased solution ionic strength, dissolution of lime and hence soluble Ca and Mg. With the more frequent irrigation (shorter irrigation interval), only grain nitrogen and sodium contents were increased with no change in the absorption of other nutrients. The shoot N, P, and K uptake with more frequent irrigation (shorter irrigation interval) was greater, however the grain P and K uptakes were similar with the less frequent irrigation (longer irrigation interval), suggesting a lack of transfer from other tissues to grain. The transfer of nitrogen and all other major elements from other tissues to grain was greatest with single row bed with both irrigation intervals, suggesting grain yield might not have been affected by a greater N, P and K fertilizer application. A key to grain yield increase with a more frequent irrigation (shorter irrigation interval) might be using a limiting micronutrient, effective in major nutrients transfer to grain from the other plant tissues or a bed shaping method enhancing its uptake.

Phytoextraction Potential of Prosopis juliflora (Sw.) DC. with Specific Reference to Lead and Cadmium

Root and shoot samples of Prosopis juliflora were assessed for their heavy metal content to evaluate the species as a green solution to decontaminate soils contaminated with lead and cadmium. The highest uptake of both the metals was observed in plants from industrial sites. Sites with more anthropogenic disturbance exhibited reduced chlorophyll levels, stunted growth, delayed and shortened reproductive phase. The ratios of lead and cadmium in leaves to lead and cadmium in soil were in the range of 0.62-1.46 and 0.55-1.71, respectively. Strong correlation between the degree of contamination and concentrations of lead and cadmium in plant samples identifies P. juliflora as an effective heavy metal remediator coupled with environmental stress.

Preparation of antibodies and development of an enzyme immunoassay for determination of atrazine in environmental samples

An indirect competitive enzyme-linked immunosorbent assay (ELISA) has been developed and optimized for atrazine determination in soil at different depths (0–10, 10–20, and 20–30 cm) before and after 48 h of application, corn shoot and cow milk samples collected from Dina farm, Egypt. This assay was based on a specific polyclonal antibodies (PAb) raised by immunizing New Zealand rabbits with an immunogen prepared by coupling 3-{4-(ethylamino)-6-(isopropylamino)-1,3,5-triazine-2-yl} thiopropanoic acid to bovine serum albumin (BSA) via N-hydroxysuccinimide (NHS) active ester method. The sensitivity (estimated as IC50value) was 17.5 μg mL−1 with a detection limit of 0.1 ng mL−1. The maximum atrazine concentration was found in soil especially in the deepest layer (325 and 890 μg kg−1 before and after application, respectively). Atrazine concentration in corn shoot was 333.28, μg kg−1 dry plant, while there was no detectable amount in milk. All samples screened by ELISA were validated by gas chromatography mass spectrometer procedure (GC/MS). Good correlation was achieved between the two methods (r = 0.997 for soil and 0.9814 for plant). This study demonstrates the utility and convenience of the simple, practical and cost–effective ELISA method in the laboratory for analysis of environmental samples. The method is ideal for the rapid screening of large numbers of samples in laboratories where access to GC/MS facilities, is limited or lacking.