Shift Of Band Edge Research Articles

Unveiling the influence of dopants on structural, defect chemistry, morphological and optical characteristics of NiO nanostructures

Abstract In this paper, undoped and doped (Fe, Co and Fe-Co) nickel oxide (NiO) nanostructures have been synthesized using co-precipitation method. Prepared samples were characterized for the structural, compositional, morphological and optical properties using x-ray diffraction, scanning electron microscopy (SEM), Energy dispersive spectrocopy (EDS), UV-visible spectroscopy and photoluminescence spectroscopy. Structural analysis confirmed the single cubic phase formation of undoped and doped samples. Defect chemistry showed that Fe-Co co-doped NiO possesses a lower density of defects than other samples. SEM results revealed the agglomeration of particles. EDS results confirmed the presence of Ni, O, Fe and Co in the respective undoped and doped samples. Optical analysis revealed the band edge shifts with the incorporation of dopants in the NiO crystal lattice confirmed the variation of band gap energy. Emission peaks were observed in the UV and visible regions. The Incorporation of dopants in the crystal lattice causes variation of emission centers. Surface oxygen vacancies and imperfections significantly impact the emission characteristics of NiO. Variable spectral response of NiO with dopant incorporation has potential for optoelectronic applications.

Band gap correction via GGA[formula omitted]mBJ function and strained modulated physical properties of 2D-like DyOBr oxybromide

Two-dimensional (2D) oxyhalides offer unique and fascinating properties due to long-range magnetic ordering in a low dimensional limit. These have potential applications in spintronics and low-dimensional data storage devices. Herein, we demonstrate the biaxial ([110]) strain impact on the electronic and magnetic properties of thermodynamically stable 2D like DyOBr oxybromide based on the first-principles calculations including Hubbard parameter (U) and U+mBJ (modified-Becke-Johnson) methods as well as spin–orbit coupling (SOC) effects. Our calculations predict that an unstrained system exhibits an anti-ferromagnetic (AFM) insulating state with a direct wide energy band gap (Eg) of 5.404 eV within GGA+U+mBJ scheme and the estimated Neel temperature (TN) using the Ising model is 13 K, which is in excellent agreement with the experimentally observed values of 5.41 eV and 9.5 K, respectively. Moreover, it is revealed that Dy ions displayed a large partial spin magnetic moment (ms) of 4.969 μB/f.u. (per formula unit) with S = 2.5 as they lie in ＋ 3 state having the electronic configuration of [fx(x2−3y2)+fy(3x2−y2)]↑2↓1, [fxz2+fyz2]↑2↓1, [fz(x2−y2)]↑1↓0, [fxyz]↑1↓0, and [fz3]↑1↓0. Interestingly, the system displays a large magnetic anisotropy energy of 4.31 meV/atom with a magnetic easy axis of [100] (a-axis), which enhances its utilization in magnetic memory devices. Further, it is established that the AFM insulating behavior of the structure remains robust against biaxial ([110]) strain for the considered range of ±5%. However, a well-ordered shift in conduction band edge (CBE) position to higher and lower energy values is predicted for compressive and tensile strains, respectively. Strikingly, it is found that the TN increases to 265% for ＋5% strain.

Narrow Band Gap Base Metal Double Perovskite Oxides Through Copper Doping of Ba2Ca0.66Nb1.33O6

This work examines the influence of copper doping on the structure, optoelectronic properties, and photocatalytic performance of transition metal double perovskite oxides of the Ba2Ca0.67Nb1.33O6 (BCN) family. A solid-state synthesis method was used to achieve partial substitution of Cu2+ in the Nb5+ site (Ba2Ca0.67Nb1.33-xCuxO6-δ, x = 0.05, 0.13, 0.26) and Ca2+ site (Ba2Ca0.67-xCuxNb1.33O6-δ, x = 0.13). The incorporation of copper in BCN resulted in significant changes in the structure and optoelectronic properties. Major differences were observed when Cu atoms occupied the Nb-site versus the Ca-site. The parent compound and Ca-site doped compounds crystallized in a P3 1 space group while Nb-site doped compounds showed increasing Fm3 mixed phase character. Cu doping resulted in a dramatic shift of the absorption band edge towards the visible region. Ca-site doping resulted in a primary band edge shift from 3.8 eV to 2.1. For the Nb-site doped compounds, the primary band-edge remained at 3.8 eV but a secondary band-edge appeared which progressively shifted to smaller energies as Cu doping increased. Ba2Ca0.67Nb1.20Cu0.13O6-δ and Ba2Ca0.67Nb1.07Cu0.26O6-δ exhibited strong absorption of near-infrared photons of wavelength well beyond 800 nm. The double perovskite oxides were utilized as photoanodes for photoelectrochemical water splitting, exhibiting both a visible photoresponse (until wavelengths as low as 520 nm) and good photochemical stability. This work showcases the possibility of forming new low band gap multi-element inorganic semiconductor oxides constituted entirely of base metals and oxygen.

Incorporation of hydroxyl groups and π-rich electron domains into g-C3N4 framework for boosted sacrificial agent-free photocatalytic H2O2 production

Photocatalytic synthesis of hydrogen peroxide (H2O2) based graphitic carbon nitride (g-C3N4) materials has garnered significant attention due to its green and sustainable attributes. In this study, g-C3N4 nanosheets enriched with π‑rich electron domains and hydroxyl groups were synthesized through the pyrolysis of urea-tartaric acid mixed solution, and subsequently utilized for efficient photocatalytic production of H2O2. The incorporation of π-rich electron domains induced a downward shift in the conduction band edge, which can significantly diminish the Coulombic interactions of singlet Frenkel excitons, thereby facilitating efficient photo-generated charge separation and accelerated charge migration. Simultaneously, the modification with hydroxyl groups in g-C3N4 network enhances water molecule adsorption, reducing side reactions and thereby increasing the efficiency of selective H2O2 generation. The integration of π-rich electron domains with hydroxyl groups in g-C3N4, along with a comprehensive understanding of their underlying mechanisms, provides valuable insights for the rational design and synthesis of highly active energy conversion catalytic materials.

Electro-Optic Response of Polymer-Stabilized Cholesteric Liquid Crystals with Different Polymer Concentrations.

Polymer-stabilized cholesteric liquid crystals (PSCLCs) have emerged as promising candidates for one-dimensional photonic lattices that enable precise tuning of the photonic band gap (PBG). This work systematically investigates the effect of polymer concentrations on the AC electric field-induced tuning of the PBG in PSCLCs, in so doing it explores a range of concentrations and provides new insights into how polymer concentration affects both the stabilization of cholesteric textures and the electro-optic response. We demonstrate that low polymer concentrations (≈3 wt. %) cause a blue shift in the short wavelength band edge, while high concentrations (≈10 wt. %) lead to a contraction and deterioration of the reflection band. Polarization optical microscopy was conducted to confirm the phase transition induced by the application of an electric field. The observations confirm that increased polymer concentration stabilizes the cholesteric texture. Particularly, the highly desired fingerprint texture was stabilized in a sample with 10 wt. % of the polymer, whereas it was unstable for lower polymer concentrations. Additionally, higher polymer concentrations also improved the dissymmetry factor and stability of the lasing emission, with the dissymmetry factor reaching the value of around 2 for samples with 10 wt. % of polymer additive. Our results provide valuable comprehension into the design of advanced PSCLC structures with tunable optical properties, enhancing device performance and paving the way for innovative photonic applications.

Bulk-phase and surface dual-defective engineering enabled Ti-based nanotubes photoanode for highly efficient photoelectrochemical water splitting

Photoelectrochemical (PEC) water splitting employing Ti-based nanostructures represents a promising strategy for achieving solar-to-hydrogen (STH) conversion. Nevertheless, the process is largely hindered by intrinsic sluggish kinetics of the oxygen evolution reaction (OER) process. In this work, we fabricate a high-efficiency Vo/TiNbO photoanode by anodizing the specifically designed Ti–Nb alloys followed by one-step electrochemical reduction. It's worth noting that bulk-phase and surface dual-defective engineering involved in Ti-based nanotubes could be utilized as effective micro-reaction platform for augmented PEC water splitting. Microstructure analysis demonstrates that bulk-phase doping and surface oxygen defects lead to a negative shift of valence-conductive band edges, which increases electrical conductivity and optical absorption. An impressive STH conversion efficiency of the co-doped system could reach 1.12 %, which is 4.6 times of pristine system. Density functional theory (DFT) calculation further confirms that the synergistic dual-defective effects play a vital role in boosting OER process. With the optimization of coordination electron configuration, determining rate step (DRS) energy barrier and adsorption energy of key intermediates decrease. We hope that the rational amalgamation of bulk-phase elements doping with surface oxygen defects introduced in this work may provide insights into developing high-performance nanostructured photoanodes for driving solar water splitting.

Influence of FRET, charge separation, and density of defect states on the improvement of UV light-driven photocatalytic activity of PMMA capped ZnO nanomaterials

This study employs oxidative polymerization, co-precipitation, and ex-situ surface capping techniques to fabricate pristine PMMA, ZnO, and PMMA-capped ZnO specimens with varying PMMA concentrations. X-ray diffraction reveals reduced directional growth of ZnO, while Fourier transform infrared spectroscopy confirms PMMA chain bonding with ZnO in PMMA-capped specimens. Scanning electron microscopy illustrates decreased average length and thickness of ZnO nanoplates post-surface modification, indicating a robust interaction between PMMA and ZnO. X-ray photoelectron spectroscopy identifies suppressed defects, including zinc interstitials and oxygen vacancies, affirming ZnO surface capping by PMMA. Absorption spectra display a blue shift in band-edge or increased bandgap, attributed to the combined effects of band alignment offset and reduced oxygen vacancy states. Luminescence spectra show gradual quenching linked to PMMA content increase, with defect-related emission suppression attributed to ZnO surface capping. UV emission suppression is ascribed to donor concentration-dependent Förster resonance energy transfer (FRET) from PMMA to ZnO. Photocatalytic tests reveal enhanced efficiency in PMMA-capped ZnO catalysts attributed to synergies involving charge separation, bulk recombination centers, oxygen vacancy states, and FRET. Efficiency improves with higher PMMA content, aligning with changes in emission intensity. The study demonstrates emission intensities' tunability through surface capping and donor concentration-dependent FRET, ultimately influencing degradation efficiency.

Unraveling the potential of heteroanionic titanium oxycarbide photocatalysts for detoxifying SARS-Cov-2 antigen rapid test kit reagent solution in water sources

In the last few years, the COVID-19 pandemic has increased the usage of antigen rapid test (ART) kits and improper disposal of these kits has led to the mixing of toxic chemical compounds present in the ART reagent solution container into drinking water sources. When consumed with drinking water, these compounds can be harmful and toxic to both humans and aquatic life. Therefore, this research presents a study on the photocatalytic degradation of the Antigen Rapid Test-Reagent solution (ART-RS) using a single-phase titanium oxycarbide - TiO0.25 C0.75 (TiOC) photocatalyst synthesized through a solid-state reaction. The synthesized samples were studied using various characterization tools to analyze their structural, morphological, and optical characteristics. In the photocatalytic experiment, it was found that the synthesized titanium oxycarbide photocatalyst exhibited superior ART-RS degradation efficiency of 77% compared to commercial titanium dioxide (22%). The improved photocatalytic degradation efficiency of ART-RS is attributed to a combination of several factors. These factors include a narrower band gap, more efficient charge transfer kinetics, enhanced absorption of visible light, and an upward shift of the valence band (VB) edge in titanium oxycarbide. These collective effects contribute to the enhanced ART-RS photocatalytic degradation activity.

Plasmon-exciton interactions in ZnO/AuNPs heterostructure film for high photoconductivity

This study investigatesplasmon-exciton interactions within ZnO/AuNPs heterostructure films. Elemental, structural, and morphological analyses validate the successful formation of these films. The observed shift in the plasmonic resonance band and absorption edge otowards the red region the red region is attributed to strong surface plasmon damping influenced by exciton interactions within ZnO. Irradiation with blue light induces plasmonic electrons, generation in the ZnO/AuNPs film, enhancing electrical conductivity through interaction with ZnO excitonic states. UV light irradiating generates the electron-hole pair in the ZnO film and interacts with the free electrons in AuNPs. The ZnO/AuNPs heterostructure films hold promise for applications such as high-performance UV-photodetectors, photoactive layers in solar cells, light-emitting diodes, and energy storage devices.

Solvation Shifts the Band-Edge Position of Colloidal Quantum Dots by Nearly 1 eV.

The optoelectronic properties of colloidal quantum dots (cQDs) depend critically on the absolute energy of the conduction and valence band edges. It is well known these band-edge energies are sensitive to the ligands on the cQD surface, but it is much less clear how they depend on other experimental conditions, like solvation. Here, we experimentally determine the band-edge positions of thin films of PbS and ZnO cQDs via spectroelectrochemical measurements. To achieve this, we first carefully evaluate and optimize the electrochemical injection of electrons and holes into PbS cQDs. This results in electrochemically fully reversible electron injection with >8 electrons per PbS cQDs, allowing the quantitative determination of the conduction band energy for PbS cQDs with various diameters and surface compositions. Surprisingly, we find that the band-edge energies shift by nearly 1 eV in the presence of different solvents, a result that also holds true for ZnO cQDs. We argue that complexation and partial charge transfer between solvent and surface ions are responsible for this large effect of the solvent on the band-edge energy. The trend in the energy shift matches the results of density functional theory (DFT) calculations in explicit solvents and scales with the energy of complexation between surface cations and solvents. As a first approximation, the solvent Lewis basicity can be used as a good descriptor to predict the shift of the conduction and valence band edges of solvated cQDs.

Effect of natural non-metallic impurities on the electronic structure and optical properties of sphalerite ZnS

Impurity-bearing sphalerite is widely found in nature and plays a vital role in photocatalysis. A systematic theoretical study of the crystal structure, band gap and optical properties of ZnS containing Si, Se and P impurities, respectively, is carried out using density functional theory calculations. The results show that non-metallic atoms in the interstices narrow the ZnS bandgap, improving the electrical conductivity of sphalerite. Analysis of the optical properties reveals that ZnS containing non-metallic impurities produces light absorption at higher energies. Meanwhile, the presence of all three impurities leads to a red shift in the absorption band edge of ZnS, which favors the extension of the light absorption range of sphalerite. The effect of the Si impurity is greater than that of the remaining two impurities, with the highest red shift. This research contributes to the application of sphalerite (ZnS) containing natural impurities in the field of new luminescent materials.

Synthesis and Photocatalytic Activity of High-Quality Lead(II) Sulfide Nanoparticles from Lead(II) Thiosemicarbazone Complexes as Single Source Precursors

We report the synthesis of lead(II) complexes of 2-(thiophen-2-ylmethylene) hydrazine-1-carbothioamide (1) and 2-(1-(thiophen-2-yl) ethylene) hydrazine-1-carbothioamide (2), which were used as single source precursors in hexadecylamine (HDA) and oleylamine (OLA) at 190, 230, and 270°C to synthesize lead(II) sulfide nanoparticles. Optical studies by UV–vis analysis showed a general blue shift in the absorption band edge of the PbS nanoparticles (NPs) with energy bandgaps determined by Tauc’s plots ranging from 2.15 to 3.11 eV. The development of NPs with a variety of morphologies that changed with temperature and precursor type was demonstrated by morphological characterization using scanning electron microscopy and transmission electron microscopy. Cubic, rod-shaped, and nearly spherical-shaped PbS were formed. Powder X-ray diffraction (p-XRD) structural studies revealed the face-centered cubic structure of PbS nanoparticles. The elements contained in the nanoparticles were identified by energy dispersive X-ray spectroscopy (EDX). These results suggest that the size, shape, and optical properties of the synthesized PbS NPs were affected by reaction temperature, capping group, and precursor type. Under UV irradiation, the photocatalytic activity of HDA-capped PbS nanoparticles on the degradation of methylene blue dye ranged from 28.3% to 60.0%, with lead sulfide nanoparticle obtained by thermolysis of complex (1) at 230°C showing the highest photocatalytic efficiency (60.0%).

Vertical plane depth‐resolved surface potential and carrier separation characteristics in flexible CZTSSe solar cells with over 12% efficiency

AbstractCu2ZnSn(S,Se)4 (CZTSSe) solar cells have resource distribution and economic advantages. The main cause of their low efficiency is carrier loss resulting from recombination of photo‐generated electron and hole. To overcome this, it is important to understand their electron‐hole behavior characteristics. To determine the carrier separation characteristics, we measured the surface potential and the local current in terms of the absorber depth. The elemental variation in the intragrains (IGs) and at the grain boundaries (GBs) caused a band edge shift and bandgap (Eg) change. At the absorber surface and subsurface, an upward Ec and Ev band bending structure was observed at the GBs, and the carrier separation was improved. At the absorber center, both upward Ec and Ev and downward Ec‐upward Ev band bending structures were observed at the GBs, and the carrier separation was degraded. To improve the carrier separation and suppress carrier recombination, an upward Ec and Ev band bending structure at the GBs is desirable.

Unveiling efficient S-scheme charge carrier transfer in hierarchical BiOBr/TiO2 heterojunction photocatalysts.

The construction of a potential heterojunction catalyst with proper interface alignment has become a hot topic in the scientific community to effectively utilize solar energy. In this work, a one-dimensional TiO2 nanofiber/BiOBr S-scheme heterojunction was synthesized, and charge carrier dynamics within the interface channel were explored. In addition, we incorporated mixed phase TiO2 with point defects and oxygen vacancies, which greatly promoted the initial band edge shift from the UV region. Upon the addition of BiOBr, absorption in the visible light region of the electromagnetic (EM) spectrum was observed with a decrease in the optical band gap value. The optimized BiOBr heterojunction (BTNF1.5) revealed a higher photocatalytic RhB dye degradation efficiency due to the efficient generation and separation of charge carriers upon light irradiation. The optimum sample BTNF1.5 showed a high degradation efficiency of 98.4% with a rate constant of 47.1 min-1 at 8 min of visible light irradiation, which is double than that of the pure TiO2. Electrochemical analysis, time-resolved photoluminescence and Kelvin probe measurement revealed an S-scheme charge-transfer mechanism within the BiOBr/TiO2 system. This work provides a strategy for the facile synthesis of heterojunction photocatalysts exhibiting exceptional catalytic performance.

High-temperature effects for transition state calculations in solids.

Transition state calculation is a critical technique to understand and predict versatile dynamical phenomena in solids. However, the transition state results obtained at 0K are often utilized for the prediction or interpretation of dynamical processes at high temperatures, and the error bars of such an approximation are largely unknown. In this benchmark study, all the major temperature effects, including lattice expansion, lattice vibration, electron excitation, and band-edge shift, are evaluated with first-principles calculations for defect diffusion in solids. With the inclusion of these temperature effects, the notable discrepancies between theoretical predictions at 0K and the experimental diffusivities at high temperatures are dramatically reduced. In particular, we find that lattice expansion and lattice vibration are the dominant factors lowering the defect formation energies and hopping barriers at high temperatures, but the electron excitation exhibits minor effects. In sharp contrast to typical assumptions, the attempt frequency with lattice expansion and vibration varies significantly with materials: several THz for aluminum bulk but surprisingly over 500THz for 4H-SiC. For defects in semiconductors, the band-edge shift is also significant at high temperatures and plays a vital role in defect diffusion. We expect that this study would help accurately predict the dynamical processes at high temperatures.

Yellow TiO2 from titanium peroxo complexes: Verification of the visible light activity and a rational enhancement of its photocatalytic efficiency

It is widely believed that colored TiO2 materials (yellow, blue, black, violet, etc.) are visible-light active photocatalysts. In this article, we verify this claim with respect to the yellow TiO2 photocatalyst that has been synthesized using peroxo-titanium complexes formation route. The surface oxygen species, the electronic structure, the photoelectrochemical properties, and the photoactivity of yellow TiO2 have been investigated. FT-IR and XPS analysis confirms the presence of surface peroxo-species that caused the yellow color. Spectroelectrochemical measurements confirmed the absorption of violet light (400–430 nm). The reduced band gap energy (3.05 eV) has resulted from the anodic shift of both conduction and valence band edges by 0.30 and 0.15 eV, respectively. However, the wavelength-dependent photocurrent generation by yellow TiO2 in the presence of oxygen and under deaerated conditions proved that it does not contribute to the photoactivity enhancement in the visible region (λ > 400 nm). The proposed mechanism has shown that although the driving force at the oxidation side is theoretically improved, the reduction counterpart is parallelly weakened and the photoinduced electrons cannot efficiently reduce regular electron acceptors in aqueous systems (e.g., O2, H2O). Adding a low amount of a stronger electron acceptor (e.g., H2O2) into the system provides extra HO• radicals through the reductive mechanism. At higher concentrations of H2O2, the oxidation of H2O2 is more favorable. The hydroxylation of terephthalic acid via the oxidative and reductive pathway along with the bleaching of Congo Red indicates improved photocatalytic activity due to enhanced hydrogen peroxide activation. Although yellow TiO2 is active only upon UV light irradiation, this paper reports how to boost the photocatalytic activity of this material.

Visible light induced self‐cleaning performance of iron‐doped TiO2 nanoparticles for surface applications

AbstractThis study aimed to enhance the visible light photosensitivity of TiO2 nanoparticles for self‐cleaning applications by doping with Fe3+. Nanocrystalline undoped and Fe‐doped TiO2 (Ti1 − xFexO2, x = .01–.04) were synthesized via sol–gel method. The results demonstrated that Fe‐doped TiO2 nanoparticles exhibited visible light sensitivity and self‐cleaning properties. An increased Fe concentration resulted in a red shift in the absorption band edge. Fe0.03‐doped TiO2 with an average particle size of ∼21 nm, a crystallite size of ∼12 nm, and a band gap of ∼2.86 eV showed the highest photocatalytic activity (60% methylene blue degradation) and super‐hydrophilicity (water droplet contact angle 9°) under visible light radiation. These findings highlight the potential of Fe‐doped TiO2 nanoparticles as a promising material for self‐cleaning applications.

Anodic Dissolution Rates Accelerate with Decreasing MoS2 Nanoflake Thickness

Electrochemical gating of 2D transition metal dichalcogenide (TMD) electrodes is an emerging frontier in the field of semiconductor electrochemistry. In this approach, an applied bias modifies the charge carrier concentration of the 2D TMD, causing band edge shifts and drastic changes in charge transfer rates. However, leveraging this effect for (photo)electrocatalysis is practically limited by the stability of the TMD material under gating conditions. Gerischer showed anodic dissolution of bulk TMD electrodes can occur in the dark and hypothesized that the reaction proceeds via an electron tunneling mechanism from surface states to the TMD conduction band [H. Gerischer, D. Ross, and M. Lubke, Z. Physickalische Chem., 139, 1 (1984)]. Here we investigate this possibility in single MoS2 nanoflakes using in situ optical microscopy and explore whether Gerischer’s electron tunneling mechanism can explain anodic dissolution rates of thin 2D semiconductors. Spatially resolved measurements show anodic dissolution initiates at perimeter edge sites and accelerates exponentially with decreasing layer thickness, consistent with Gerischer’s tunneling mechanism. Interestingly, single layer MoS2 is impervious to anodic dissolution at applied potentials >200 mV more positive than those required to drive dissolution in bulk and multilayer-thick nanoflakes.

A first-principles study on the electronic and optical properties of ZnO nanowires toward detection of α-amino acids

In this paper, ab initio calculations for the adsorption of six prevalent alpha-amino acids, as metabolite biomarkers, onto the zinc oxide nanowire (ZnONW) are accomplished by applying the SIESTA package. This study aims to assay the electronic and optical properties of the α-amino acid-adsorbed ZnONWs comparatively. The species of interest contain arginine, asparagine, cysteine, glycine, lysine, and proline as repetitive monomers in human cells. Representation of total and local density of states reveals strong chemisorption of the α-amino acids from the carboxylic end with the nanowire through n-type conduction in conjunction with the adsorption energy of lower than −0.816 eV and charge transfer of higher than 0.238 |e|, respectively. In particular, highly polarizable cysteine-adsorbed ZnONW with the maximum difference in isoelectric point of ZnO and cysteine shows the highest corresponding quantities equal to −2.825 eV and 0.543 |e|, respectively. In comparison with the pristine ZnONW, the higher the amount of charge transferred in α-AA-adsorbed ZnONW, the larger the shift in the conduction band edge to the lower energies. The calculation of the absorption coefficient for the α-amino acid-adsorbed ZnONWs implies the presence of an enhanced peak within the near-UV spectrum for the carboxyl-oriented arginine-, lysine-, and proline-ZnONW complexes, in addition to an attenuated peak within the visible spectrum for the carboxylic/thiol-oriented cysteine-ZnONW configuration. Subsequently, it is revealed that jointly exploring both electronic and optical properties of the specific cysteine-adsorbed nanowires is of utmost importance, which could provide further evidence for the early prognosis of cystinuria and other associated metabolic disorders.

Variable metal valence states with band-edge shift over in-situ annealed CuTi-LDH nanosheets for efficient hydrogen and oxygen reduction reactions

Variable metal valence states with band-edge shift over in-situ annealed CuTi-LDH nanosheets for efficient hydrogen and oxygen reduction reactions