Shell Thickness Research Articles

Xylanase and phytase supplementation of Moringa oleifera diets: effects on the performance, egg quality and blood profile of laying hens

Context Moringa oleifera leaves present enormous potential as an alternative feedstuff for laying hens. The utilisation of the leaves can be improved by exogenous enzymes owing to the presence of non-starch polysaccharides and phytate. Aims This study evaluated the influence of Moringa oleifera leaf meal (MOL) in diets supplemented with xylanase and phytase on laying hen performance and egg quality at peak production. Methods In total, 288 Dekalb White laying hens (32 weeks old) were distributed in a completely randomised design, following a 2 × 4 factorial arrangement (with or without MOL × 4 enzyme supplementations). Each treatment comprised six repetitions, each containing six hens. The control diet was based on ground corn and soybean meal, and the treatment diets were supplemented with 5% MOL, followed by three enzyme additives (xylanase, phytase and a xylanase + phytase blend). Key results The enzyme supplementation in MOL diets positively influenced egg production (P = 0.012), egg weight (P = 0.021) and egg mass (P = 0.009). The birds offered xylanase-supplemented diets had higher feed intakes (P = 0.015) than did those fed other diets. Moringa oleifera increased the albumen height (P < 0.001) and Haugh unit (P < 0.001), whereas MOL and phytase improved eggshell thickness (P < 0.001) and the candling score (P = 0.049), compared with treatments without phytase supplementation. MOL and enzyme supplementation improved yolk colour intensity (L, A and R parameters) and decreased plasma total cholesterol and LDL cholesterol concentrations. The inclusion of 5% MOL in diets did not impair laying performance. However, when MOL diets were supplemented with exogenous enzymes, there was an increase in egg weight. Conclusions MOL can be included at 5% in layer diets without affecting performance. When used in combination with xylanase and phytase, they improve performance, intensify yolk colour, and improve shell thickness, candling score, as well as serum biochemical profile. Implications These findings suggest that the combination of dietary MOL + xylanase + phytase can improve performance and egg quality in laying hens at peak production.

A structural, magnetic and colloidal stability study of uncoated and silica coated iron oxide samples prepared in two different surfactants

The discovery of new magnetic materials of interest in the biomedicine field is a relevant topic in current research. For years, our research group has been investigating the obtaining and study of nanostructured magnetic samples that behave superparamagnetically to enable their transport in living organisms. We present here a study that summarizes the structural characteristics, magnetic behavior and stability of two Fe3O4 samples synthesized by coprecipitation that were dispersed using two different surfactants (oleylamine, OL, and oleic acid, OA), and two others prepared from the previous ones by reaction with tetraethyl orthosilicate (TEOS). The relationships between the surfactant used in the synthesis, the presence of a certain maghemite (γ-Fe2O3) content, the influence of silica shell thickness and magnetic behaviour of all samples were systematically studied by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), Mössbauer spectroscopy and H vs. M loops. Rietveld refinements of the XRD profiles confirmed a partial oxidation of the non-silica-coated samples and FTIR spectra of the uncoated samples showed a very strong broad metal-oxygen band and additional sets of bands from the different organic chains of the two surfactants. Individual particles with a mean diameter of 7 and 9 nm were distinguished in TEM images of uncoated magnetic samples. Mössbauer data indicated the presence of non-stoichiometric magnetite in all samples, in agreement with XRD refinements. Magnetic measurements confirmed the superparamagnetic behavior of all the samples. Highest negative zeta potential values are found for the silica covered samples in both acidic and basic medium, being Fe3O4-AO@SiO2 the best suited for the purposes of its dispersibility in future applications. Low polydispersity index (PDI) values confirmed the best stability and dispersibility of all samples investigated in tetrahydrofuran (THF).

Buckling analysis of PMMA hemispherical pressure shells with thickness variation

The buckling behaviour of polymethyl methacrylate (PMMA) hemispherical pressure shells under uniform external pressure was investigated experimentally and numerically. Six PMMA hemispherical pressure shells were prepared via the free blow-forming process. The geometry and wall thickness of each hemispherical shell were measured. The collapse loads and final failure modes of all shells were obtained via a hydrostatic pressure device. In addition, through optical 3D scanning, a numerical model of the hemispherical shell that reflects the actual geometric imperfection was established and used in the finite element buckling analysis. The numerical results were in agreement with the test results. These findings provide a reference for evaluating the buckling load of PMMA hemispherical shells prepared via the free blow-forming process.

The Effect of the Surrounding Matrix on Spin Transition Nanoparticles: How Shell Characteristics Alter Core Elastic Properties in Core‐Shell Particles

A surrounding matrix is known to alter nanoparticle spin transitions, the solid state structural phase changes associated with transitions between high spin (HS) and low spin(LS) states. To better quantify how the spin transition solid and surrounding matrix interact, several series of core‐shell particles were prepared based on RbxCo[Fe(CN)6]z∙nH2O, RbCoFe‐PBA, as spin transition core with isostructural shells of different compositions and thicknesses. Synchrotron PXRD through the thermal high HS to LS, the LS to photoexcited high spin (PXHS), and thermal PXHS to LS transitions, show the activation energy is lowered as shells become thicker and stiffer. Calorimetry data coupled with transition state theory analysis indicate the core stiffens in the core‐shell particles relative to the uncoated particles. The conclusion is supported by microstrain analysis that shows stiffer shells limit the extent to which the core distorts as individual sites transition, leading to the lower activation energy. Finally, differences in lattice mismatch with different shell materials are shown to alter the mechanism by which the transition progresses.

Effect of shell composition on watertightness and mechanical performance of cement-based capsules used as self-healing additives of cement

The aim of this work is the development of cementitious macro-capsules for self-healing cement and concrete materials. Emphasis is placed on shell properties, including size, thickness, strength, and volume to active component ratio. This enhancement is aimed at protecting the healing agent and ensuring adequate reactivity upon crack formation, surpassing survivability considerations. To this direction, core/shell particles have been produced following the pan-coating method, while different types and concentrations of setting acceleration solutions for the shell stabilization were studied. The formation of core-shell capsules encompasses the formation a spherical core through agglomeration, followed by simultaneous spraying of cement powder and a setting acceleration solution for the shell formation, under continuous rotation. The microstructural characteristics of the shell were studied through scanning electron microscopy (SEM), while the reactivity of the protected core (reactive agent) inside the hardened mortar mixtures was evaluated using thermogravimetric analysis (TGA). Moreover, the crushing load of the capsules under compression and their survivability during mixing process were examined and interpreted in relation to their diameter, circularity, and shell thickness.The results revealed the ability of the encapsulation methodology proposed to tailor the shell properties and modify the capsule properties so as satisfy the requirements of different applications. The use of setting accelerators during shell formation proved essential for enhancing the density and the strength of the shell layer. As a consequence, this leads to macro-scale capsules with elevated survivability rate and core reactivity.

Constraining Ocean and Ice Shell Thickness on Miranda from Surface Geological Structures and Stress Modeling

Images from the Voyager 2 mission revealed the small Uranian satellite Miranda to be a complex, dynamic world. This is exemplified by signs of recent geological activity, including an extensive fault system and the mysterious coronae. This has led to speculation that Miranda may have been tectonically active within the geologically recent past and could have hosted a subsurface liquid water ocean at the time. In this work, we aim to constrain the thickness ranges for the ice shell and potential subsurface ocean on Miranda. Here, we present the results for our geological mapping of craters, ridges, and furrows on the surface. We also present the results for our comparison of the geographic distribution of these features to the predicted geographic distribution of maximum tidal stress based on stress models. We model eccentricity tidal stress, ice shell thickening stress, true polar wander stress, and obliquity tidal stress and compare the predicted surface stress pattern for each to what pattern can be inferred from the surface geology. Our results show that a thin crust (≤30 km) is most likely to result in sufficient stress magnitude to cause brittle failure of ice on Miranda’s surface. Our results also suggest the plausible existence of a ≥100 km thick ocean on Miranda within the last 100–500 million yr. This has implications for the dynamical history of Miranda and its status as a potential ocean world.

Tribological properties of oil impregnated carbon nanocapsules modified with polydopamine-polyethyleneimine

Self-lubricating microcapsules can reduce the coefficient of friction/wear and improve the tribological properties of polymer composites. Impregnation of prefabricated shell with core substances is a versatile and applicable route to obtain the microcapsules. In this work, double shell nanocapsules (PA@C HSM) with particle size of 448nm, shell thickness of 65nm are obtained by incorporating paraffin wax (PA) into the pre-synthesized hollow carbon nanospheres (PHCs)and then packaged by co-depositing with polydopamine (PDA) and polyethylenimine (PEI). The PDA/PEI transition shell increase the surface roughness of the nanocapsule and enhance the compatibility with the polymer matrix which will contribute to the improved oil storage ability and thermal stability of the nanocapsules as well. The distinguished mechanical interlocking and chemical interface bonding between PDA/PEI layer and EP matrix effectively facilitates mitigating the unfavorable impact of PA@C HSM on the mechanical properties of the composite with the modulus of the 7.5wt.% PA@C HSM/EP composites increased by 17.44%. As for the tribological performance of PA@C HSM/EP composite, the tribological properties are boosted remarkably and the friction coefficient and wear rate of 7.5%PA@C HSM/EP composite are reduced by 77.69% and 98.79% compared with pure EP material.

Investigation of long-range plasmonic field effects in Au@SiO2 nanostructures using p-nitrophenol reduction

As an emerging field, plasmonic photocatalysis has gradually garnered attention from researchers. It is generally accepted that localized surface plasmonic resonance (LSPR) in noble metallic nanostructures enhances photocatalysis through the induction of a long-range plasmonic field. Furthermore, nanostructures in close proximity can enhance the electromagnetic (EM) field via plasmonic coupling, which also contributes to improved photocatalytic activity. In this study, core-shell nanostructures composed of Au nanorods (AuNRs) with pinhole-free SiO2 shells (pf-AuNRs@SiO2) are synthesized as non-contact, long-range photocatalysts. By tuning the aspect ratios (ARs) of the AuNRs to match the LSPR peaks with the wavelength of the irradiation light source, an optimized photocatalytic effect was achieved in the reduction of p-nitrophenol (p-NP). Additionally, by comparing shell thicknesses of 5 nm and 10 nm, it was observed that the 5 nm thickness exhibited superior catalytic efficiency. This enhancement is attributed to the thinner shell allowing reactants to be placed within a stronger plasmonic field.

Multi-shell bowl-like carbon microspheres for lightweight and broadband microwave absorption

Carbon materials have made significant progress in the field of microwave absorption (MA), but achieving wide effective absorption bandwidth (EAB) at low filler content still remains a great challenge. In this work, we design multi-shell bowl-like mesoporous carbon microspheres (MBMCs) by a facile hard template method for efficient MA. It is demonstrated that the spacing between inner and outer shell and second shell thickness play a vital role on the configuration of carbon microspheres. By controlling the second addition of silica template, the microstructure of carbon microsphere evolves from spherical to bowl shape geometry. Expanded shell spacing is beneficial for forming bowl-like microsphere. The dielectric loss and MA properties are highly associated with the configuration of MBMCs. Well-proportioned MBMCs with appropriate shell spacing present wide EAB of 7.3 GHz under a low filling ratio of 12 wt.%. This work paves a new way to broaden EAB and lower filling content of carbon materials via asymmetric multilayer microstructure design.

Stress-based topological shape optimization for thick shells using the level set method and trimmed non-conforming multi-patch isogeometric analysis

Stress-based topological shape optimization for thick shells using the level set method and trimmed non-conforming multi-patch isogeometric analysis

Change of composition and surface plasmon resonance of Pd/Au core/shell nanoparticles triggered by CO adsorption.

Controlling composition and plasmonic response of bimetallic nanoparticles (NPs) is of great relevance to tune their catalytic activity. Herein, we demonstrate reversible composition and plasmonic response transitions from a core/shell to a bimetallic alloyed palladium/gold NP triggered by CO adsorption and sample temperature. The use of self-organized growth on alumina template film allows scrutinizing the impact of core size and shell thickness onto NP geometry and plasmonic response. Topography, molecular adsorption, and plasmonic response are addressed by scanning tunneling microscopy, vibrational sum frequency generation (SFG) spectroscopy, and surface differential reflectance spectroscopy, respectively. Modeling CO dipolar interaction and optical reflectivity corroborate the experimental findings. We demonstrate that probing CO adsorption sites by SFG is a remarkably sensitive and relevant method to investigate shell composition and follow in real-time Pd atom migration between the core and the shell. Pd-Au alloying is limited to the first two monolayers of the shell and no plasmonic response is found, while for a thicker shell, a plasmonic response is observed, concomitant with a lower Pd concentration in the shell. Above 10-4mbar, at room temperature, CO adsorption triggers the shell restructuration, forming a Pd-Au alloy that weakens the plasmonic response via Pd migration from the core to the shell. NP annealing at 550K, after pumping CO, leads to the desorption of remaining CO and gives enough mobility for Pd to migrate back inside the core and recover a pure gold shell with its original plasmonic response. This work demonstrates that surface stoichiometry and plasmonic response can be tuned by using CO adsorption and NP annealing.

Regulating the interfacial structure in percolating graphite nanoplate/PVDF composites via TiO2 as an interlayer towards meliorative dielectric performances

Polymer nanocomposites combining large dielectric permittivity (ε′) but low loss along with high breakdown strength (Eb) have garnered significant attention in the fields of electronic devices and power systems. To concurrently accomplish these desirable performances in pristine graphite nanoplates (GNP)/poly(vinylidene fluoride, PVDF) composites, the GNP were initially encased by a layer of anatase-type titanium dioxide (TiO2) shell, and then incorporated into PVDF to investigate the effect of TiO2 interlayer on the dielectric properties of the nanocomposites, specifically in relation to the thickness of the TiO2 shell and the nanofiller concentration. The TiO2 shell acts as a barrier layer prohibiting the electronic percolating, thus significantly reducing the dielectric loss and leakage conductivity of the GNP@TiO2/PVDF. Moreover, it not only alleviates the strong dielectric mismatch between GNP and PVDF, which restrains local electric field distortion, but also introduces charge traps, raising the energy barrier height for captured charge detrapping and preventing the growth of electric trees and subsequently promoting the Eb. For example, the PVDF with 20 wt% of GNP@TiO2 exhibited good comprehensive dielectric performances: ε′ of 50.63, loss factor of 0.071 (100 Hz) and Eb of 7.89 kV/mm. Additionally, tailoring the TiO2’s thickness can simultaneously modulate the overall dielectric parameters in the GNP@TiO2/PVDF. Theoretical fitting of experimental data via Havriliak-Negami equation uncovers the underlying polarization mechanism and the interlayer’s impact on charge migration. This work provides an efficient method for developing and producing polymeric nanodielectrics that simultaneously incorporate increased Eb with high ε′ but low loss for potential use in power devices and microelectronic devices.

SN 2021dbg: A Luminous Type IIP–IIL Supernova Exploding from a Massive Star with a Layered Shell

We present extensive observations and analysis of supernova (SN) SN 2021dbg, utilizing optical photometry and spectroscopy. For approximately 385 days following the explosion, SN 2021dbg exhibited remarkable luminosity, surpassing most Type II SNe (SNe II). This initial high luminosity is potentially attributed to interaction between the ejected material and the surrounding circumstellar material (CSM), as evidenced by the pronounced interaction signatures observed in its spectra. The subsequent high luminosity is primarily due to the significant 56Ni mass (0.17 ± 0.05 M ⊙) produced in the explosion. Based on the flux of flash emission lines detected in the initial spectra, we estimate that the CSM mass near the progenitor amounted to ∼(1.0–2.0) × 10−3 M ⊙, likely resulting from intense stellar wind activity 2–3 yr preceding the explosion. Considering the bolometric light curve, nebular spectrum modeling, and mass-loss rate, we suggest that the progenitor of SN 2021dbg was a red supergiant (RSG) with a mass of ∼20 M ⊙ and a radius of 1200 R ⊙. This RSG featured a thick hydrogen shell, which may have contained a region with a sharp decrease in material density, electron density, and temperature, contributing to its layered structure. This object demonstrates mixed features of Type IIP and IIL SNe, making it a transitional event linking the above two subclasses of SNe II.

Monitoring the thermal state of an ingot with beveled and rounded corners in a slab crystallizer of a CCM

The organization of ingot cooling in the continuous caster mold affects the reliability, productivity and quality of the resulting ingots. Insufficient heat exchange between the solidifying metal and the wall of the mold leads to a decrease in the thickness of the solid shell of the ingot, which causes the formation of surface defects, and when the ingot is pulled out of the mold, emergency breakthroughs occur. Excessive heat transfer leads to an increase in the thickness of the solid shell, which entails excessive shrinkage of the ingot surface with the formation of a gap between the solid shell of the ingot and the walls of the mold. The appearance of an air gap leads to increased wear of the copper walls of the mold. There is a design of copper walls that makes it possible to reduce the normal component of forces that occurs during wear, reduce the temperature gradient and stress concentration in the corner of the ingot, and also bring the thickness of the hard crust stocking in the corner closer to the perimeter of the mold. However, the thermal state of the formed ingot with such a crystallizer design remains poorly understood. The goal of the work is to create a virtual tool for monitoring the operation of the mold of a slab continuous caster based on the development of a mathematical and computer model of the thermal state of an ingot with beveled and rounded corners. The temperature distribution in the ingot was calculated using the quasi-equilibrium theory of solidification. The numerical implementation of the mathematical model and obtaining an approximate solution using a computer were carried out using the finite dif-ference method and an implicit difference scheme. A computer program was developed in the Matlab development environment. Using computer modeling, the temperature distribution over the volume of the slab at the outlet of the mold with beveled and rounded corners was obtained. The program for the selected mold design allows you to analyze the solidification of the ingot skin and monitor this process for the selected steel grade and specified casting technological parameters

Synergistically magnetic and dielectric properties of two dimensional Fe3Al@PPy lamellae exhibiting broadband and strong electromagnetic wave absorption

Addressing the issue of low impedance characteristics is essential to improve the electromagnetic wave absorption performance of magnetic materials. Herein, two dimensional Fe3Al@polypyrrole (PPy) lamellae with synergistic magnetic and dielectric properties are fabricated by a mechanical alloying, ordering transformation and polymerization process, which exhibits excellent electromagnetic wave absorption performance. By carefully controlling the thickness of the PPy shell, the optimized Fe3Al@PPy lamellae show a minimum reflection loss of −45.6 dB and an effective absorption bandwidth of 9.1 GHz at a thickness of only 1.5 mm. The conformal growth of Fe3Al@PPy lamellae can induce strong interfacial polarization, dipole polarization, multiple scattering effect and magnetic loss behaviors for the attenuation of electromagnetic waves. This study demonstrates a facile strategy for the development of efficient Fe3Al@PPy composite absorbents showing great potential for practical applications.

Mechanical Characteristics of Bivalve (Mollusc) Shells from the East Coast of India: Implications and Their Significance on the Survival Strategy

Due to natural selection, an increase in biotic and abiotic factors develops an adaptive response in bivalves (molluscs) for survival. Morphological variation in a bivalve is strongly correlated with the changes in the structural and compositional properties of a shell. Therefore, the mechanical characteristics of a shell reflect its morpho-functional adaptation against predation and ecological stresses. An initial investigation into the primary mechanical attributes of predominant bivalve shells from the east coast of India, Tegillarca granosa, Meretrix meretrix, Sunetta meroe, Mactra turgida and Donax scortum, has been documented in this study. The quantitative assessment of the centreline thickness, Vickers hardness and density variation of the shells were measured and correlated along with the preliminary investigation of the microstructural patterns. The results from our study are in agreement with the most vulnerable region of a shell, located just below the umbonal zone, which has been verified through predatory boreholes in other studies. Our data shows a high correlation between shell hardness and density, which could also be the potential properties to consider in detail for future studies, apart from the shell thickness, which could provide a broader perspective on the stability of bivalve shells. Different microstructural patterns observed in the species could be phylogenetically driven based on their life modes.

The Influence of Dietary Supplementation with Dried Olive Pulp on Gut Microbiota, Production Performance, Egg Quality Traits, and Health of Laying Hens.

This study examines the dietary effect of dried olive pulp (OP) on the overall performance, egg quality, health, and gut microbiota of laying hens during a 36-week trial. A total of 180 Isa Brown layers, aged 23 weeks, were assigned to 15-floor pens and divided into three feeding groups (CON, OP4, and OP6) based on the dietary level of OP. Egg quality and biochemical parameters were assessed in 39- and 59-week-old hens. Fecal samples were collected for microbiota analysis. Data were analyzed with an Analysis of Variance. The percentage of broken eggshells was found to be 15-34% lower in the OP groups compared to the CON groups. At 59 weeks of age, a significant reduction in shell thickness was observed in the CON eggs compared to the OP eggs (p < 0.05). At 39 weeks of age, OP6 eggs had the darkest yolk color of all groups (p < 0.05). Fecal microbial diversity was affected only by hens' age. However, an enrichment in bacterial species belonging to the genera Megasphaera and Megamonas was found in the OP groups at 59 weeks of age. Our results demonstrate that OP feeding beneficially affects egg quality and promotes the proliferation of bacteria involved in the degradation of complex plant compounds, potentially contributing to the overall health of the gut microbiota.

The study of design and optimisation for CFRP combined pier anti-collision device

A CFRP honeycomb combination anti-collision device with a larger anti-collision level, greater crashworthiness, and longer service life was designed to safeguard the ship and piers in the event of an unintentional collision. Taking large-tonnage cargo ships and common bridge piers in the middle reaches of the Yangtze River as the research objects, the energy conversion response, impact force response and impact depth response of the collision were studied considering the collision conditions between the ship and the bare pier and the collision avoidance device. On this basis, the response surface method, variance analysis method and efficacy coefficient method were further used to take the shell thickness of the collision avoidance device and the thickness of the internal steel structure as the design parameters. The multi-objective optimisation design of the CFRP composite anti-collision device is carried out by selecting the ship impact force, the total internal energy absorbed by the anti-collision device, the total mass, and the inner diameter of the honeycomb steel structure as the optimisation objectives. The results show that the impact force reduction rate reaches 82.7%, the overall mass is greatly reduced, the maximum deformation is within a reasonable range, and the collision resistance is optimised.

Laser Scanner-Based Hyperboloid Cooling Tower Geometry Inspection: Thickness and Deformation Mapping.

Hyperboloid cooling towers are counted among the largest cast-in-place industrial structures. They are an essential element of cooling systems used in many power plants in service today. Their main structural component, a reinforced-concrete shell in the form of a one-sheet hyperboloid with bidirectional curvature continuity, makes them stand out against other towers and poses very high construction and service requirements. The safe service and adequate durability of the hyperboloid structure are guaranteed by the proper geometric parameters of the reinforced-concrete shell and monitoring of their condition over time. This article presents an original concept for employing terrestrial laser scanning to conduct an end-to-end assessment of the geometric condition of a hyperboloid cooling tower as required by industry standards. The novelty of the proposed solution lies in the use of measurements of the interior of the structure to determine the actual thickness of the hyperboloid shell, which is generally disregarded in geometric measurements of such objects. The proposal involves several strategies and procedures for a reliable verification of the structure's verticality, the detection of signs of ovalisation of the shell, the estimation of the parameters of the structure's theoretical model, and the analysis of the distribution of the thickness and geometric imperfections of the reinforced-concrete shell. The idea behind the method for determining the actual thickness of the shell (including its variation due to repairs and reinforcement operations), which is generally disregarded when measuring the geometry of such structures, is to estimate the distance between point clouds of the internal and external surfaces of the structure using the M3C2 algorithm principle. As a particularly dangerous geometric anomaly of hyperboloid cooling towers, shell ovalisation is detected with an innovative analysis of the bimodality of the frequency distribution of radial deviations in horizontal cross-sections. The concept of a complete assessment of the geometry of a hyperboloid cooling tower was devised and validated using three measurement series of a structure that has been continuously in service for fifty years. The results are consistent with data found in design and service documents. We identified a permanent tilt of the structure's axis to the northeast and geometric imperfections of the hyperboloid shell from -0.125 m to +0.136 m. The results also demonstrated no advancing deformation of the hyperboloid shell over a two-year research period, which is vital for its further use.

IDENTIFICATION OF AN ARBITRARY MOVING AXISYMMETRIC LOAD ACTING ON A CYLINDRICAL SHELL

Various types of external non-stationary loads can act on various structural elements and cylindrical shells of finite length in particular distributed and concentrated, stationary and moving load. When using various external load identification methods, the type of external load is usually known. In prac- tice this is not always the case. The purpose of the study is to develop a method for identifying an arbitrary axisymmetric load acting on an elastic cy- lindrical shell of finite length, which can be used to identify a moving load. To model the non-stationary load of a cylindrical shell, a system of differ- ential equations of the refined Timoshenko theory for medium thickness shells was used. The solution to this system of differential equations is ob- tained by expanding the unknown functions into Fourier series and applying the integral Laplace transform. The solution of the inverse problem was obtained using the theory of integral equations and the Tikhonov regularization method. As a result of the study, a solution of the inverse problem of solid mechanics to identify an arbitrary axisymmetric non-stationary load was obtained. A numerical experiment was carried out to use the developed method to identify a moving non-stationary load acting on a simply supported cylindrical shell of medium thickness. The simulation results indicate a fairly accurate identification of both the change in time and the distribution along the shell of a non-stationary axisymmetric moving load. A method has been developed for identifying an external non-stationary load randomly distributed along a cylindrical shell, which makes it possible to identify a moving load without preliminary information about the type of this load. The developed method allows us to reproduce moving non-stationary loads, which are often encountered in practice, and expand it to other types of structural elements.