PDF HTML阅读 XML下载 导出引用 引用提醒 强耦合式带状注速调管多间隙输出腔的设计 DOI: 作者: 作者单位: 中国科学院电子学研究所 中国科学院高功率微波源与技术重点实验室,中国科学院电子学研究所 中国科学院高功率微波源与技术重点实验室,中国科学院电子学研究所 中国科学院高功率微波源与技术重点实验室,中国科学院电子学研究所 中国科学院高功率微波源与技术重点实验室,中国科学院电子学研究所 中国科学院高功率微波源与技术重点实验室,中国科学院电子学研究所 中国科学院高功率微波源与技术重点实验室 作者简介: 通讯作者: 中图分类号: 基金项目: Design of multi-gap output cavity of strong coupling sheet-beam klystron Author: Affiliation: Institute o f Electronics, Chinese Academy o f Sciences,Institute o f Electronics, Chinese Academy o f Sciences,Institute o f Electronics, Chinese Academy o f Sciences,Institute o f Electronics, Chinese Academy o f Sciences,Institute o f Electronics, Chinese Academy o f Sciences,Key Laboratory of High Power Microwave Sources and Technologies,Institute o f Electronics, Chinese Academy o f Sciences Fund Project: 摘要 | 图/表 | 访问统计 | 参考文献 | 相似文献 | 引证文献 | 资源附件 | 文章评论 摘要:提出了一种强耦合式带状注速调管多间隙输出腔, 并将之应用于Ka波段带状注速调管输出腔的设计. 此设计可以获得更好的输出耦合特性和理想的场形. 更重要的是, 这种结构的漂移管允许被设计为对工作频率的截止状态, 从而可以获得更理想的电场场形以利于注波互作用. 从表面电流的角度分析了这种设计的理论依据. 通过使用粒子模拟软件进行仿真, 在中心频率获得了稳定的功率输出, 互作用效率达到50%以上, 3dB带宽约75MHz. Abstract:A new strong coupling multi-gap output structure has been developed as the output cavity of Ka band sheet beam klystrons. This structure has a better output coupling characteristics and better shape of electric field. Moreover, when the drift tube of the output cavity is cut-off in the operating frequency, an ideal field shape can be obtained as to support more efficient beam-wave interaction. An analysis of the distribution of the surface current supports the design theoretically. A stable output power curve can be observed at the center frequency by using particle-in-cell simulations, where the interaction efficiency is more than 50% and the 3dB bandwidth is about 75MHz. 参考文献 相似文献 引证文献