Shear Wave Speed Measurements Research Articles

Ultrasound shear wave elastography in pediatric stricturing small bowel Crohn disease: correlation with histology and second harmonic imaging microscopy.

Preclinical animal as well as small exploratory ex vivo and in vivo human studies have suggested that bowel wall shear wave speed (SWS) measurements may be a noninvasive biomarker of intestinal damage. To evaluate the relationships between bowel wall stiffness, measured using ultrasound shear wave elastography (SWE), and intestinal fibrosis and smooth muscle hypertrophy as determined by (1) histology and (2) second harmonic imaging microscopy (SHIM) in surgically resected ileal strictures from pediatric Crohn disease patients. Nineteen pediatric Crohn disease patients with symptomatic ileal strictures underwent research ultrasound examinations before surgical resection between December 2017 and September 2020. Two-dimensional SWE was performed through the area of the most severe stenosis, with measurements obtained from the bowel wall at the 9:00, 12:00 and 3:00 o'clock locations with 0%, 10% and 20% abdominal strain. Overall right lower quadrant stiffness also was documented. Median bowel wall and overall right lower quadrant SWS measurements were correlated with bowel wall histological scores of inflammation, fibrosis and smooth muscle proliferation as well as SHIM collagen signal. Diagnostic ultrasound SWE imaging was obtained from 18 participants. The median age was 16.8 years. There were negative correlations between histological mucosal active inflammation and both bowel wall SWS with 10% abdominal strain (r=-0.50, P = 0.04) and overall right lower quadrant SWS with 20% abdominal strain (r=-0.69, P = 0.002). There were positive correlations between histological muscularis propria inner layer smooth muscle hypertrophy and both median bowel wall SWS with 10% abdominal strain (r = 0.72, P = 0.002) and overall right lower quadrant SWS with 20% abdominal strain (r = 0.71, P = 0.002). There were no associations between ultrasound stiffness metrics and bowel wall SHIM collagen measurements. Bowel wall and overall right lower quadrant ultrasound stiffness measurements correlate with mucosal active inflammation and muscularis propria smooth muscle hypertrophy in pediatric stricturing ileal Crohn disease, but not with intestinal fibrosis.

Shear wave tensiometry tracks reductions in collateral ligament tension due to incremental releases.

Surgeons routinely perform incremental releases on overly tight ligaments during total knee arthroplasty (TKA) to reduce ligament tension and achieve their desired implant alignment. However, current methods to assess whether the surgeon achieved their desired reduction in the tension of a released ligament are subjective and/or do not provide a quantitative metric of tension in an individual ligament. Accordingly, the purpose of this study was to determine whether shear wave tensiometry, a novel method to assess tension in individual ligaments based on the speed of shear wave propagation, can detect changes in ligament tension following incremental releases. In seven medial and eight lateral collateral porcine ligaments (MCL and LCL, respectively), we measured shear wave speeds and ligament tensions before and after incremental releases consisting of punctures with an 18-gauge needle. We found that shear wave speed squared decreased linearly with decreasing tension in both the MCL (average coefficient of determination(R2 avg ) = 0.76) and LCL (R2 avg = 0.94). We determined that errors in predicting tension following incremental releases were 26.2 and 14.2 N in the MCL and LCL, respectively, using ligament-specific calibrations. These results suggest shear wave tensiometry is a promising method to objectively measure the tension reduction in released structures.Clinical Significance: Direct, objective measurements of the tension changes in individual ligaments following release could enhance surgical precision during soft tissue balancing in total knee arthroplasty. Thus, shear wave tensiometry could help surgeons reduce the risk of poor outcomes associated with overly tight ligaments, including residual knee pain and stiffness.

Assessment of ultrasound shear wave elastography within muscles using different region of interest sizes, manufacturers, probes and acquisition angles: an ex vivo study.

The application of shear wave elastography (SWE) in assessment of the musculoskeletal system is affected by various factors. This study aimed to explore the influence of machines, probes, region of interest (ROI) sizes, and the acquisition angles on muscle shear wave speed (SWS). The SWS of ex vivo isolated muscles were acquired using 3 different machines (Aixplorer system, SuperSonic Imagine; Acuson S3000, Siemens Healthcare; Resona 7, Mindray) and 2 linear probes (Aixplorer system, SL 10-2 and SL 15-4). Also, 4 different ROI sizes (diameter 1-10 mm) and 9 different acquisition angles (0-40°) were tested. The SWS acquired under different conditions were compared, and the intra-class correlation coefficients (ICC) were used to evaluate reproducibility. There was a significant difference in SWS acquired using the 3 different machines (P<0.001) or with 9 different angles (P=0.008). There was no significant difference in SWS acquired using 2 probes (P=0.053) or 4 different ROI sizes (P=0.874, 0.778, and 0.865 for 3 operators, respectively). All machines produced substantial intra-system reproducibility (ICC, 0.61-0.80). Both probes demonstrated an almost perfect degree of intra-system agreement (ICC, >0.80), and nearly all ROI sizes demonstrated an almost perfect degree of intra- and inter-operator agreement (ICC, >0.80). The measurement reliability was higher when the acquisition angles were no more than 20°. The 3 machines had different SWS values. Attention should be paid when comparing SWS results using different machines. For the Aixplorer system, the ROI size had no effect on the SWS values. Angles larger than 25° will lead to SWS measurements with greater variability compared to smaller angles (≤20°).

Ankle syndesmosis biomechanical evaluation by shear-waves elastography in healthy young adults: Assessment of the reliability and accuracy of the measurements and definition of a corridor of normality

BackgroundAims of this study were: 1/ to evaluate the shear wave speed (SWS) properties of the anteroinferior tibiofibular ligament (AITFL) and the distal interosseous membrane (DIOM) in neutral, dorsal flexion and plantar flexion positions in a cohort of healthy adult volunteers; 2/ to assess the reliability and reproducibility of these measurements. MethodsBoth ankles were analyzed by shear wave elastography (SWE) in 20 healthy patients (10 females/10 males) standing on a hinge support with their ankles in neutral, 20° dorsal flexion and 30° plantar flexion positions. Stiffness of AITFL and DIOM was evaluated by SWS measurement. ResultsThe SWS of AITFL and DIOM were minimal in the plantar flexion position (4.28 m/s [2.65–5.11] and 3.35 m/s [1.69–4.55], respectively). It increased significantly for both ligaments in neutral position (4.69 m/s [3.53–5.71] and 3.81 m/s [1.91–4.74], respectively; p < 0.0001), and reached their maximum values in dorsal flexion (6.58 m/s [5.23–8.34] and 4.79 m/s [3.07–6.19], respectively; p < 0.0001). There was no correlation between each ligament regardless the positions. SWS of AITFL was independent of demographic characteristics analyzed. SWS of DIOM was negatively correlated with height in dorsal flexion (ρ = −0.35; p = 0.03) and in plantar flexion (ρ = −0.37; p = 0.02). Female gender was associated with increased DIOM SWS in neutral (p = 0.005), dorsal flexion (p = 0.003), and plantar flexion (p = 0.001) positions. Moreover, foot morphology (foot arch, hind foot frontal deviation) did not impact AITFL nor DIOM SWS. Inter- and intra-observer measurements were all good or excellent. ConclusionThe AITFL and DIOM, stabilizers of the distal tibiofibular syndesmosis, increase in stiffness while dorsal flexion increases. This study describes a reliable and reproducible protocol to assess their stiffness by SWE, and defines a corridor of normality.

Contribution of shear wave elastography in evaluation of the deltoid in reverse shoulder arthroplasty: reproducibility study and preliminary results

The current difficulty of reverse shoulder arthroplasty (RSA) is soft tissue management, and adequate deltoid tensionand at present there is no consensus and available tools (X-ray, MRI, EMG) remain difficult to apply in clinical follow-up.The objective of this study was (1) to determine reliability and feasibility of deltoid elasticity assessment using ultrasound elastographyand (2) to assess the change of deltoid stiffness after RSA by comparing shear wave speed (SWS) between healthyand RSA shoulders. Twenty-six healthy (native shoulder, painless and complete range of motion)subjects and twelve patients with RSA were included. Two independent investigators performed 3 measurements on each segment.Measurements were bilateral. Anterior segment was also evaluated at 45° and 60° of passive abduction. Reliability andfeasibility have been assessed (ISO5725-standard). Coefficient of measurements variation was less than 6.1% and0.13 m/s. In the healthy group, SWS was not significantly different between anterior and middle segments; however, the SWSof the posterior segment was significantly lower than others (p<0.0001). In abduction position, compared to the rest position,SWS of the anterior segment decreased at 45° abduction (p=0.0003) and increased at 60° abduction (p<0.0001). Variability ofmeasurement was higher in the RSA group. No significant difference was found between the SWS measurement of the operatedand non-operated side. SWS measurements of the operated side of the anterior and middle segment were significantlyhigher compared to the healthy group. In abduction position, compared to rest position, no difference in SWS of the anteriorsegment was found at 45° abduction (p=0.71) and nor at 60° abduction (p=0.75). This study demonstrated feasibilityand reliability of shoulder assessment with shear wave elastography. Reference values for asymptomatic patients canalready be used in future studies on shoulder pathology and surgery.

Comprehensive experimental assessments of rheological models’ performance in elastography of soft tissues

Elastography researchers have utilized several rheological models to characterize soft tissue viscoelasticity over the past thirty years. Due to the frequency-dependent behavior of viscoelastic parameters as well as the different techniques and frequencies employed in various studies of soft tissues, rheological models have value in standardizing disparate techniques via explicit mathematical representations. However, the important question remains: which of the several available models should be considered for widespread adoption within a theoretical framework? We address this by evaluating the performance of three well established rheological models to characterize ex vivo bovine liver tissues: the Kelvin-Voigt (KV) model as a 2-parameter model, and the standard linear solid (SLS) and Kelvin-Voigt fractional derivative (KVFD) models as 3-parameter models. The assessments were based on the analysis of time domain behavior (using stress relaxation tests) and frequency domain behavior (by measuring shear wave speed (SWS) dispersion). SWS was measured over a wide range of frequency from 1 Hz to 1 kHz using three different tests: (i) harmonic shear tests using a rheometer, (ii) reverberant shear wave (RSW) ultrasound elastography scans, and (iii) RSW optical coherence elastography scans, with each test targeting a distinct frequency range. Our results demonstrated that the KVFD model produces the only mutually consistent rendering of time and frequency domain data for liver. Furthermore, it reduces to a 2-parameter model for liver (correspondingly to a 2-parameter “spring-pot” or power-law model for SWS dispersion) and provides the most accurate predictions of the material viscoelastic behavior in time (>98% accuracy) and frequency (>96% accuracy) domains. Statement of SignificanceRheological models are applied in quantifying tissues viscoelastic properties. This study is unique in presenting comprehensive assessments of rheological models:•We employed experimental data in both the frequency domain (shear wave speed (SWS) vs. frequency) and time domain (stress relaxation) to assess rheological models’ performances.•SWS were acquired over a wide frequency range, 1 Hz to 1 kHz, by three independent techniques.•Using the frequency domain analysis, we evaluated how well each model can predict measured time domain behaviors (and vice versa).•This presents wide-ranging experimental proofs as the most comprehensive study of its type in terms of the number of experiments, frequency range, and conjoined assessments of time and frequency domains behaviors, demonstrating the most appropriate rheological model for soft tissues.

Ultrasound Shear Wave Elastography of the Intervertebral Disc and Idiopathic Scoliosis: A Systematic Review.

Ultrasound shear wave elastography is a radiation-free and low-cost technique for evaluating the mechanical properties of different tissues. This study systematically reviewed all relevant literature on shear wave elastography of the intervertebral disc. The purpose was twofold: first, to determine the validity of the elastography method, that is, the correlation between elastographically measured shear wave speed and disc mechanical properties, and inter-/intra-operator reliability; and second, to explore if disc elastography is potentially useful in identifying children at risk for idiopathic scoliosis. This systematic review was performed according to the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-analyses) guidelines. A comprehensive search was performed in PubMed and Embase, and study quality was assessed using the AXIS (Appraisal Tool for Cross-sectional Studies) critical appraisal instrument. Seven articles were included. Three animal ex vivo studies reported moderate-to-good correlations between shear wave speed and disc mechanical properties (r=0.45-0.81). Three studies reported high intra-operator repeatability (intra-class correlation coefficient [ICC] 0.94-0.99) and inter-operator reproducibility (ICC 0.97-0.98). Four clinical studies measured shear wave speed in asymptomatic children. Two studies reported significantly higher shear wave speeds in scoliosis patients compared with healthy controls, measured in discs both inside and outside the scoliotic curve. In conclusion, shear wave elastography appears reliable in assessing intervertebral disc mechanical characteristics. Despite its promising capabilities to distinguish patients with asymptomatic from those with pathological discs, the exact correlation between disc mechanical properties and shear wave speed remains unclear.

Characterizing Musculoskeletal Tissue Mechanics Based on Shear Wave Propagation: A Systematic Review of Current Methods and Reported Measurements.

Developing methods for the non-invasive characterization of the mechanics of musculoskeletal tissues is an ongoing research focus in biomechanics. Often, these methods use the speed of shear wave propagation to characterize tissue mechanics (e.g., shear wave elastography and shear wave tensiometry). The primary purpose of this systematic review was to identify, compare, and contrast current methods for exciting and measuring shear wave propagation in musculoskeletal tissues. We conducted searches in the Web of Science, PubMed, and Scopus databases for studies published from January 1, 1900, to May 1, 2020. These searches targeted both shear wave excitation using acoustic pushes and mechanical taps, and shear wave speed measurement using ultrasound, magnetic resonance imaging, accelerometers, and laser Doppler vibrometers. Two reviewers independently screened and reviewed the articles, identifying 524 articles that met our search criteria. Regarding shear wave excitation, we found that acoustic pushes are useful for exciting shear waves through the thickness of the tissue of interest, and mechanical taps are useful for exciting shear waves in wearable applications. Regarding shear wave speed measurement, we found that ultrasound is used most broadly to measure shear waves due to its ability to study regional differences and target specific tissues of interest. The strengths of magnetic resonance imaging, accelerometers, and laser Doppler vibrometers make them advantageous to measure shear wave speeds for high-resolution shear wave imaging, wearable measurements, and non-contact ex vivo measurements, respectively. The advantages that each method offers for exciting and measuring shear waves indicate that a variety of systems can be assembled using currently available technologies to determine musculoskeletal tissue material behavior across a range of innovative applications.

Basic investigation on identification of tissue composition based on propagation speeds of longitudinal and shear waves

The elastic modulus of tissue as a useful biomarker of disease detection can be quantitatively evaluated based on shear wave speed (SWS) measurements in shear wave elastography. Although the longitudinal wave speed (LWS) is also expected to be a promising biomarker for disease detection, the elasticity is not always dominant because the LWS is affected by the bulk modulus. In other words, LWS and SWS may reflect different tissue properties. Therefore, in this study, based on the improvement in LWS measurement, the relationship between the composition of a phantom mixed with agar and glycerol and ultrasonically measured LWS and SWS was investigated. The LWS had a good sensitivity in detecting glycerol, while the SWS had a good sensitivity in detecting agar. The calculated Poisson’s ratio had a better sensitivity in detecting agar. In conclusion, a simultaneous measurement of LWS and SWS may help identify the tissue composition.

Shear wave elastography: the relationship of the cervical stiffness with gestational age and cervical length- a feasibility study

Objectives To standardize the measurement of shear wave elastography for assessment of cervical stiffness and its relationship with gestational age and cervical length. Methods A prospective cross-sectional study was conducted from September 2017 to March 2019. Data from 125 unselected women (at 11–13 + 6, 18–22 and 24–28 weeks’ gestation) and 55 high-risk women were analyzed for the study. Six regions of interest were evaluated for cervical elastography in the mid-sagittal position by transvaginal ultrasound. Statistical analyses were performed using R statistical language in R-studio. Delivery outcomes were recorded for each patient. Results The shear wave elastography was feasible with good intraoperator and interoperator reproducibility. The endocervical canal and anterior lip internal position had the highest reproducibility (ICC-0.82, 0.75). Shear wave speed was significantly higher in all internal os regions than the external os. There was a statistically significant negative linear relationship of shear wave speed with the gestational age. There was a weak positive relationship between shear wave speed and cervical length. There was no difference between pregnancies with and without spontaneous preterm delivery in shear wave speed measurements and cervical length, although numbers were small for statistical analysis. The internal os of the large loop excision of the transformation zone group was stiffer than the normal population. Conclusion Cervical elastography is feasible and effectively evaluates the tensile properties of the cervix during pregnancy. The most reproducible measurements were obtained at the anterior lip of the internal cervical os. Combining evaluation of cervical elasticity and length might further improve the identification of women at risk of preterm delivery. Currently, technical issues hinder the practical application of shear wave elastography in the clinical setting and require further research and development of the imaging modality.

Cylindrical Transducer Array for Intravascular Shear Wave Elasticity Imaging: Preliminary Development.

We present an intravascular ultrasound (IVUS) transducer array designed to enable shear wave elasticity imaging (SWEI) of arteries for the detection and characterization of atherosclerotic soft plaques. Using a custom dicing fixture, we have fabricated single-element and axially-segmented array transducer prototypes from 4.6-Fr to 7.6-Fr piezoceramic tubes, respectively. Focused excitation of the array prototype at 4 MHz yielded a focal gain of 5× in intensity, for an estimated 60 mW/cm2 [Formula: see text] and 1.6-MPa negative peak pressure at 4.5-mm range in water. The single-element transducer generated a peak radial displacement of [Formula: see text] in a uniform elasticity phantom, with axial shear waves detectable by an external linear array probe up to 5 mm away from the excitation plane. In a vessel phantom with a soft inclusion, the array prototype generated peak displacements of 2.2 and [Formula: see text] in the soft inclusion and vessel wall regions, respectively. A SWEI image of the vessel phantom was reconstructed, with measured shear wave speed (SWS) of 1.66 ± 0.91 m/s and 0.97 ± 0.59 m/s for the soft inclusion and vessel wall regions, respectively. The array prototype was also used to obtain a SWEI image of an ex vivo porcine artery, with a mean SWS of 3.97 ± 1.12 m/s. These results suggest that a cylindrical intravascular ultrasound (IVUS) transducer array could be made capable of SWEI for atherosclerotic plaque detection in coronary arteries.

Imaging the Local Nonlinear Viscoelastic Properties of Soft Tissues: Initial Validation and Expected Benefits.

Imaging tissue mechanical properties has shown promise in noninvasive assessment of numerous pathologies. Researchers have successfully measured many linear tissue mechanical properties in laboratory and clinical settings. Currently, multiple complex mechanical effects such as frequency-dependence, anisotropy, and nonlinearity are being investigated separately. However, a concurrent assessment of these complex effects may enable more complete characterization of tissue biomechanics and offer improved diagnostic sensitivity. In this work, we report for the first time a method to map the frequency-dependent nonlinear parameters of soft tissues on a local scale. We recently developed a nonlinear elastography model that combines strain measurements from arbitrary tissue compression with radiation-force-based broadband shear wave speed (WS) measurements. Here, we extended this model to incorporate local measurements of frequency-dependent shear modulus. This combined approach provides a local frequency-dependent nonlinear parameter that can be obtained with arbitrary, clinically realizable tissue compression. Initial assessments using simulations and phantoms validate the accuracy of this approach. We also observed improved contrast in nonlinearity parameter at higher frequencies. Results from ex-vivo liver experiments show 32, 25, 34, and 38 dB higher contrast in elastograms than traditional linear elasticity, elastic nonlinearity, viscosity, and strain imaging methods, respectively. A lesion, artificially created by injection of glutaraldehyde into a liver specimen, showed a 59% increase in the frequency-dependent nonlinear parameter and a 17% increase in contrast ratio.

Performance of Shear Wave Speed Measurements by Using Reverberant Optical Coherence Elastography

Elasticity of biological tissue is important to understand its properties, which could play important role in medical diagnosis and treatment, especially in its early stage of pathology. Optical Coherence Elastography (OCE) has been intensively developed for mapping the elasticity contrast of various biological tissues. OCE techniques based on tracking of shear vibrational wave propagation is one of the most popular techniques. The high speed of shear wave propagation in biological media leads to challenges in both data acquisition and data processing. Recently, the concept of reverberant shear wave fi eld has been applied to OCE, called Rev3D-OCE. In this work, we experimentally investigate the performance of Rev3D-OCE to differentiate gelatin phantoms with a slight difference of elasticity. We verifi ed that Rev3D-OCE can differentiate different shear wave speeds associated with different concentrations of gelatin phantoms, where higher shear wave speed was observed in a higher concentration of the phantom as expected. The average shear wave speed of gelatin with 3 wt% and 4 wt% concentrations were measured as 1.3 ± 0.2 m/s and 1.5 ± 0.1 m/s with about 11% and 14% of errors as compared with that obtained by standard mechanical testing, respectively. In addition, the spatial resolution of Rev3D-OCE as determined from the edge response measurement at the boundary between two gelatins of 3 wt% and 4 wt% concentrations was measured to be 0.3 millimeters.

Shear wave speed measurement bias in a viscoelastic phantom across six ultrasound elastography systems: a comparative study with transient elastography and magnetic resonance elastography

PurposeTo quantify the bias of shear wave speed (SWS) measurements in a viscoelastic phantom across six different ultrasound (US) systems and to compare the SWS with those from transient elastography (TE) and magnetic resonance elastography (MRE).MethodsA viscoelastic phantom of stiffness representing fibrotic liver or healthy thyroid was measured with nine (linear probe) and 10 (convex probe) modes of six different US-based shear wave elastography (SWE) systems using linear and convex probes. SWS measurements of three regions of interest were repeated thrice at two focal depths, coupling the probe to the phantom using a jig. An MRE system using three motion-encoding gradient frequencies of 60, 90, and 120 Hz and TE were also used to measure the stiffness of the phantom.ResultsThe SWS from different SWE systems had mean coefficients of variation of 9.0–9.2% and 5.4–5.6% with linear and convex probes, respectively, in viscoelastic phantom measurement. The focal depth was a less significant source of SWS variability than the system. The total average SWS obtained with US-SWE systems was 19.9% higher than that obtained with MRE at 60 Hz, which is commonly used in clinical practice, and 31.5% higher than that obtained with TE using the M probe.ConclusionsDespite the measurement biases associated with the SWE systems, biases were not necessarily consistent, and they changed with the probes used and depth measured. The SWS of the viscoelastic phantom obtained using different modalities increased according to the shear wave frequency used.

Nonlinear Characterization of Tissue Viscoelasticity With Acoustoelastic Attenuation of Shear Waves.

Shear-wave elastography (SWE) measures shear-wave speed (SWS), which is related to the underlying shear modulus of soft tissue. SWS in soft tissue changes depending on the amount of external strain that soft tissue is subjected to due to the acoustoelastic (AE) phenomenon. In the literature, variations of SWS as a function of applied uniaxial strain were used for nonlinear characterization, assuming soft tissues to be elastic, although soft tissues are indeed viscoelastic in nature. Hence, nonlinear characterization using SWS alone is insufficient. In this work, we use SWS together with shear-wave attenuation (SWA) during incremental quasi-static compressions in order to derive biomechanical characterization based on the AE theory in terms of well-defined storage and loss moduli. As part of this study, we also quantify the effect of applied strain on measurements of SWS and SWA since such confounding effects need to be taken into account when using SWS and/or SWA, e.g., for staging a disease state, while such effects can also serve as an additional imaging biomarker. Our results from tissue-mimicking phantoms with varying oil percentages and ex vivo porcine liver experiments demonstrate the feasibility of our proposed methods. In both experiments, SWA was observed to decrease with applied strain. For 10% compression in ex vivo livers, shear-wave attenuation decreased, on average, by 28% (93 Np/m), while SWS increased, on average, by 20% (0.26 m/s).

Plantar Soft Tissue Characterization Using Reverberant Shear Wave Elastography: A Proof-of-Concept Study

Plantar soft tissue stiffness provides relevant information on biomechanical characteristics of the foot. Therefore, appropriate monitoring of foot elasticity could be useful for diagnosis, treatment or health care of people with complex pathologies such as a diabetic foot. In this work, the reliability of reverberant shear wave elastography (RSWE) applied to plantar soft tissue was investigated. Shear wave speed (SWS) measurements were estimated at the plantar soft tissue at the first metatarsal head, the third metatarsal head and the heel from both feet in five healthy volunteers. Experiments were repeated for a test-retest analysis with and without the use of gel pad using a mechanical excitation frequency range between 400 and 600 Hz. Statistical analysis was performed to evaluate the reliability of the SWS estimations. In addition, the results were compared against those obtained with a commercially available shear wave-based elastography technique, supersonic imaging (SSI). The results indicate a low coefficient of variation for test-retest experiments with gel pad (median: 5.59%) and without gel pad (median: 5.83%). Additionally, the values of the SWS measurements increase at higher frequencies (median values: 2.11 m/s at 400 Hz, 2.16 m/s at 450 Hz, 2.24 m/s at 500 Hz, 2.21 m/s at 550 Hz and 2.31 m/s at 600 Hz), consistent with previous reports at lower frequencies. The SWSs at the plantar soft tissue at the first metatarsal head, third metatarsal head and heel were found be significantly (p<0.05) different, with median values of 2.42, 2.16 and 2.03 m/s, respectively which indicates the ability of the method to differentiate between shear wave speeds at different anatomical locations. The results indicated better elastographic signal-to-noise ratios with RSWE compared to SSI because of the artifacts presented in the SWS generation. These preliminary results indicate that the RSWE approach can be used to estimate the plantar soft tissue elasticity, which may have great potential to better evaluate changes in biomechanical characteristics of the foot.

Measured Hyperelastic Properties of Cervical Tissue with Shear-Wave Elastography.

The nonlinear mechanical behaviour of cervical tissue causes unpredictable changes in measured elastograms when pressure is applied. These uncontrolled variables prevent the reliable measurement of tissue elasticity in a clinical setting. Measuring the nonlinear properties of tissue is difficult due to the need for both shear modulus and strain to be taken simultaneously. A simulation-based method is proposed in this paper to resolve this. This study describes the nonlinear behaviour of cervical tissue using the hyperelastic material models of Demiray–Fung and Veronda–Westmann. Elastograms from 33 low-risk patients between 18 and 22 weeks gestation were obtained. The average measured properties of the hyperelastic material models are: Demiray–Fung— = 2.07 (1.65–2.58) kPa, = 6.74 (4.07–19.55); Veronda–Westmann— = 4.12 (3.24–5.04) kPa, = 4.86 (2.86–14.28). The Demiray–Fung and Veronda–Westmann models performed similarly in fitting to the elastograms with an average root mean square deviation of 0.41 and 0.47 ms, respectively. The use of hyperelastic material models to calibrate shear-wave speed measurements improved the consistency of measurements. This method could be applied in a large-scale clinical setting but requires updated models and higher data resolution.

Sources of Variability in Shear Wave Speed and Dispersion Quantification with Ultrasound Elastography: A Phantom Study.

There is a growing interest in quantifying shear-wave dispersion (SWD) with ultrasound shear-wave elastography (SWE). Recent studies suggest that SWD complements shear-wave speed (SWS) in diffuse liver disease diagnosis. To accurately interpret these metrics in clinical practice, we analyzed the impact of operator-dependent acquisition parameters on SWD and SWS measurements. Considered parameters were the acquisition depth, lateral position and size of the region of interest (ROI), as well as the size of the SWE acquisition box. Measurements were performed using the Canon Aplio i800 system (Canon Medical Systems, Otawara, Tochigi, Japan) and four homogeneous elasticity phantoms with certified stiffness values ranging from 3.7 to 44 kPa. In general, SWD exhibited two to three times greater variability than SWS. The acquisition depth was the main variance-contributing factor for both SWS and SWD, which decayed significantly with depth. The lateral ROI position contributed as much as the acquisition depth to the total variance in SWD. Locations close to the initial shear-wave excitation pulse were more robust to biases because of inaccurate probe-phantom coupling. The size of the ROI and acquisition box did not introduce significant variations. These results suggest that future guidelines on multiparametric elastography should account for the depth- and lateral-dependent variability of measurements.

A Cross-Machine Comparison of Shear-Wave Speed Measurements Using 2D Shear-Wave Elastography in the Normal Female Breast

Quantitative measures of radiation-induced breast stiffness are required to support clinical studies of novel breast radiotherapy regimens and exploration of personalised therapy, however, variation between shear-wave elastography (SWE) machines may limit the usefulness of shear-wave speed (cs) for this purpose. Mean cs measured in four healthy volunteers’ breasts and a phantom using 2D-SWE machines Acuson S2000 (Siemens Medical Solutions) and Aixplorer (Supersonic Imagine) were compared. Shear-wave speed was measured in the skin region, subcutaneous adipose tissue and parenchyma. cs estimates were on average 2.3% greater when using the Aixplorer compared to S2000 in vitro. In vivo, cs estimates were on average 43.7%, 36.3% and 49.9% significantly greater (p &lt;&lt; 0.01) when using the Aixplorer compared to S2000, for skin region, subcutaneous adipose tissue and parenchyma, respectively. In conclusion, despite relatively small differences between machines observed in vitro, large differences in absolute measures of shear wave speed measured were observed in vivo, which may prevent pooling of cross-machine data in clinical studies of the breast.

Acoustic radiation force imaging (ARFI) in the non-distended bladder does not predict abnormal urodynamic parameters in children.

Acoustic radiation force imaging (ARFI) is a recently developed form of ultrasound imaging that allows in vivo measurement of tissue stiffness. This technology could be useful at predicting bladder compliance in children. We hypothesize that tissue stiffness, as measured by ARFI, correlates with abnormal bladder compliance and capacity in patients with bladder dysfunction. Patients who presented for cystometrography (CMG) underwent ARFI of the bladder wall. Nine bladder wall shear wave speed (SWS) measurements were acquired using point and 2D ultrasound shear wave elastography. The mean for each ARFI technique was correlated to bladder compliance, calculated using Wahl's dimensionless number. ARFI parameters also were correlated with bladder capacity. A total of 25 patients were enrolled. Mean age at time of enrollment was 4.2±3.9 years (range two months to 15 years). There was no significant correlation between bladder compliance and point shear wave speed measurements (r=-0.22, p=0.31) or 2D shear wave speed measurements (r=-0.35, p=0.1). A total of 19 patients had bladder capacity below expected bladder capacity (EBC). There was no significant correlation between bladder capacity and point shear wave speed measurements (r =-0.08, p=0.7) or 2D shear wave speed measurements (r=-0.36, p=0.09). Our results did not demonstrate a significant correlation between bladder wall ARFI shear wave measurements and bladder compliance or bladder capacity. Further studies are warranted to determine whether ARFI may be used to predict abnormal urodynamic parameters in children.