Claw Shape Research Articles

Losers can win: Thermoregulatory advantages of regenerated claws of fiddler crab males for establishment in warmer microhabitats

Fiddler crab males present a hypertrophied claw, which is used for sexual and aggressive displays, fights with competitors, and has been proposed as an important thermoregulatory organ for heat control. Two claw morphologies can be observed within fiddler crab populations: brachychelous claws (unregenerated) and leptochelous claws (regenerated). The leptochelous morphotype presents less muscle mass and longer fingers, resulting in a less advantageous weapon in fights. Considering their slender shape, we hypothesized that the leptochelous morphotype would present lower thermal inertia and be more efficient at body heat dissipation. We evaluated the role of the fiddler crabs' claw shape as a heat sink and how this influences their distribution between unshaded and shaded microhabitats. We tested in the field whether the proportion of adult male Leptuca uruguayensis with leptochelous claws was higher in unshaded microhabitats than shaded ones. In the laboratory, we tested if heat transfer between the body and claw is higher in leptochelous males than in brachychelous males. Spontaneous waving behaviour and active time above the surface were compared between both morphotypes in the field during the hottest period of the day. Leptuca uruguayensis with regenerated claws comprised more than 60% of the sampled male population of unshaded microhabitats compared to 18% in shaded microhabitats. Leptochelous males showed a mean heat transfer between body to claw 35% higher than that observed for brachychelous males. During the hottest period of the day, brachychelous males waved approximately 28% more than leptochelous males. Moreover, brachychelous males spent less time under the sediment surface since the surface temperature increased, while activity of leptochelous males was not associated with a temperature increase. Therefore, regenerated claws may be advantageous for the establishment of L. uruguayensis males in warmer and unshaded microhabitats because they are more efficient for heat loss and allow crabs to cool down, spending less time waving. Our study shows the relevant context of winners and losers in the face of climate change and highlights the importance of morphological variations in thermoregulatory structures for the occupation of thermal niches.

Claw disorders as iceberg indicators of cattle welfare: Evidence-based on production system, severity, and associations with final muscle pH

This study presents a novel approach to use claw disorders in cattle as a retrospective welfare indicator characterized at the abattoir. A total of 1040 cattle (2080 front and back left claws) were analyzed from 143 batches, originating from feedlots, free-range, and dairy systems. Our results indicate that abnormal claw shapes (>55%) and fissures of the claw wall (>25%) had the highest prevalence, regardless of the system of origin. For the seven types of lesions monitored, numerous associations were found between lesions in the front and rear limbs typical of each production system. Ultimate meat pH was higher in animals with white line disease and skin wounds in feedlot and free-range cattle. We conclude that claw disorders can be used as an iceberg indicator to provide valuable information about animal fitness, and the ability to cope with the husbandry and pre-slaughter environment. These indicators can be used to improve the level of welfare of the animals.

Testing for phylogenetic signal in claws suggests great influence of ecology on Caribbean intertidal arthropods (Acari, Oribatida)

Claws are common biological attachment devices that can be found in a wide variety of animal groups. Their curvature and size are supposed to be parameters related to ecological aspects. Mites, known as very small arthropods, occupy a wide range of ecological niches and are a perfect model system to investigate correlations of claw morphology with ecology. There is only one study regarding this question in littoral mites but the phylogenetic impact, which plays an important role in the evolution of morphological traits, was not tested. We investigated claw shapes of different Caribbean populations of five species showing different substrate/habitat preferences. We used geometric morphometrics to quantify claw shape and tested for phylogenetic signal within this morphological trait. Even in closely related populations, we found clear claw shapes for hard versus soft substrate, confirming previous findings. Surprisingly, we found no phylogenetic signal within the trait, which demonstrates that ecology (different surfaces and substrates) has acted as one of the primary selective forces in the diversification of claw shapes. Considering that the basic claw design may be the same in the majority of arthropods, our results have important implications for further investigations of claw morphology and its ecological relevance within this phylum.

A new charismatic Caenis Stephens, 1835 (Ephemeroptera: Caenidae)from Southern India.

Caenis americani sp. nov. is described based on larvae and female imagoes from the Mangalamkombu stream of Southern India. Caenis americani is most likely a parthenogenetic species, in the light of the fact that only females have been collected. The larva can be distinguished from other species of Caenis by the i) shape of the sternum IX and its shagreen field, ii) shape and denticulation of hind claws and iii) lateral lobes of mesonotum distinctly bulged. The phylogenetic relationships of the new species remain unknown, as molecular records of Caenis throughout the Oriental region are largely unknown, and the taxonomically important males are absent.

Habitat, Sexual and Allometric Influences on Morphological Traits of Intertidal Crabs

Intertidal crabs display distinct morphological traits that allow differential interactions with biotic and abiotic features of the intertidal landscape, but are also influenced by allometry and sexual selection. This study aimed to explore the influence of sexual, allometric and habitat factors on morphological variation in the intertidal mangrove crab assemblage. A standardized photographic protocol was developed using readily available, low-cost technology to capture the morphology of carapaces and claws as sets of Cartesian landmarks. Digitization errors were 1 to 2 orders of magnitude smaller than the variation among individuals. In Tubuca seismella and Tubuca signata (superfamily Ocypodoidea), species that have traditionally been studied for sexual dimorphism, standardized major claw sizes were 2.8 and 3.7, respectively, times larger for males than females. Sexual dimorphism in claw size was also observed for Metopograpsus frontalis and Parasesarma longicristatum (superfamily Grapsoidea), with the largest claw in males being 15% and 33%, respectively, larger than in females. In contrast to size, claw shape did not relate to sex, except for T. seismella. Carapace shape, although variable among individuals and displaying asymmetry, was unrelated to sex. Claw and carapace shapes displayed high correlations, with values around 0.78. Carapace shapes grouped into taxonomic families and linked to habitat preferences, while claw shapes varied along a taxonomic gradient. These results complement studies on crab morphology that focus on specific factors or species, and stress the importance of multiple, interacting factors including sexual, allometric and habitat influences as drivers of morphological trait variability.

The finer points of urban adaptation: intraspecific variation in lizard claw morphology

AbstractHuman activity drastically transforms landscapes, generating novel habitats to which species must adaptively respond. Consequently, urbanization is increasingly recognized as a driver of phenotypic change. The structural environment of urban habitats presents a replicated natural experiment to examine trait–environment relationships and phenotypic variation related to locomotion. We use geometric morphometrics to examine claw morphology of five species of Anolis lizards in urban and forest habitats. We find that urban lizards undergo a shift in claw shape in the same direction but varying magnitude across species. Urban claws are overall taller, less curved, less pointed and shorter in length than those of forest lizards. These differences may enable more effective attachment or reduce interference with toepad function on smooth anthropogenic substrates. We also find an increase in shape disparity, a measurement of variation, in urban populations, suggesting relaxed selection or niche expansion rather than directional selection. This study expands our understanding of the relatively understudied trait of claw morphology and adds to a growing number of studies demonstrating phenotypic changes in urban lizards. The consistency in the direction of the shape changes we observed supports the intriguing possibility that urban environments may lead to predictable convergent adaptive change.

Harder, better, faster, stronger: Weapon size is more sexually dimorphic than weapon biomechanical components in two freshwater anomuran species.

Sexual selection influences the evolution of morphological traits that increase the likelihood of monopolizing scarce resources. When such traits are used during contests, they are termed weapons. Given that resources are typically linked to monopolizing mating partners, theory expects only males to bear weapons. In some species, however, females also bear weapons, although typically smaller than male weapons. Understanding why females bear smaller weapons can thus help us understand the selective pressures behind weapon evolution. However, most of our knowledge comes from studies on weapon size, while the biomechanics of weapons, such as the size of the muscles, efficiency, and shape are seldom studied. Our goal was to test if the theoretical expectations for weapon size sexual dimorphism also occur for weapon biomechanics using two aeglid crab species. Males of both species had larger claws which were also stronger than female claws. Male claws were also more efficient than females' claws (although we used only one species in this analysis). For weapon shape, though, only one species differed in the mean claw shape. Regarding scaling differences, in both species, male claws had higher size scaling than females, while only one species had a higher shape scaling. However, male weapons did not have higher scaling regarding strength and efficiency than females. Thus, males apparently allocate more resources in weapons than females, but once allocated, muscle and efficiency follow a similar developmental pathway in both sexes. Taken together, our results show that sexual dimorphism in weapons involves more than differences in size. Shape differences are especially intriguing because we cannot fully understand its causes. Yet, we highlight that such subtle differences can only be detected by measuring and analysing weapon shape and biomechanical components. Only then we might better understand how weapons are forged.

Adapting spherical-harmonics-based geometric morphometrics (SPHARM) for 3D images containing large cavity openings using ambient occlusion: a study with hermit crab claw shape variability

One of the advantages of mesh-based geometric morphometrics (GM) over landmark-based approaches, is that it affords the possibility of the precise examination of highly irregular shapes and complex topographic surfaces. In the case of spherical-harmonic-based GM, the main prerequisite is a completely closed mesh surface, which is often lacking, particularly when dealing with natural objects. Here we present a methodology to prepare 3D segmentations with large cavity openings for spherical-harmonics-based GM analysis. This will be exemplified by a case study of hermit crab (Paguroidea, Decapoda, and Crustacea) claws. The joint openings of the claws—between manus and ‘movable finger’ (dactylus)—typify the problem of the large cavity opening. We described a methodology, including an ambient-occlusion-based segmentation algorithm, which leads to precise results and thereby enables the study of inter- and intraspecific differences in the shape of hermit crab claws. Analysis showed a statistically significant separation between all examined diogenid and pagurid claws, whereas separation observed between all left and right claws was not significant. Additionally, the procedure offers other benefits: it is easy to reproduce and causes little variance in the data, closures integrate smoothly into the overall structures and the algorithm saves a significant amount of time.

Two new genera of Desmiphorini (Coleoptera, Cerambycidae, Lamiinae) with description of a species with non-retractile parameres

In this study, two new genera of Desmiphorini (Lamiinae) are proposed: Cleidaria gen. nov., to include Cleidaria cleidae sp. nov. from the state of Chiapas in Mexico, and Obscenoides gen. nov. for Desmiphora (D.) compta Martins & Galileo, 2005. The shape of tarsal claws of Cleidaria cleidae sp. nov. (abruptly narrowed from basal half) is so far, not found in any current genera of the tribe. With respect to Obscenoides compta (Martins & Galileo, 2005) comb. nov., the genitalia of males have an unusual shape with non-retractile parameres. The character combination related to this genital structure is unknown to us in other species in the family, and hypotheses about its function are suggested.

Get a grip-evolution of claw shape in relation to microhabitat use in intertidal arthropods (Acari, Oribatida).

Claws may be the most common biological attachment devices in animals but relatively few studies have examined the ecological and evolutionary significance of their morphology. We performed the first geometric morphometric investigation of arthropod claws using 15 intertidal oribatid mite species from two different families living in three different habitat types to determine if claw shape is correlated with ecology. Our results show that species living on rocky shores show remarkably high and strongly curved claws while species from mangrove habitats show significantly lower and less curved claws. Euryoecious species are able to dwell in a wide range of habitats and show an intermediate claw type. These results indicate a strong relationship between claw shape and microhabitat and the best predictors of microhabitat use seem to be claw height and curvature. Claw length varied to some degree among the species but without any noticeable ecological pattern. A comparison with terrestrial and freshwater aquatic oribatid mite species, on the other hand, confirms that their claws are only half as long as that of intertidal mites and it is suggested that tidal flooding and wave action strongly selects for long claws. In this microarthropod group which occupies a vast array of microhabitats, claw morphology may play an important role in niche separation and hence demonstrate the importance of ecomorphological studies.

The Development of a Hoof Conformation Assessment for Use in Dairy Goats.

Simple SummaryIn comparison to other species, there are little data evaluating hoof conformation in dairy goats. As poor conformation is associated with an increased risk of hoof lesions and lameness, it is important to be able to accurately and reliably assess hoof conformation. This study developed a reliable hoof conformation assessment for use in dairy goats using hoof photographs. The assessment included both subjective scores and objective measures. High levels of accuracy were achieved when comparing two aspects of the subjective scores against two objective measures. This suggests the subjective scores may be a suitable alternative to the more time-consuming objective measures.The assessment of hoof conformation is important due to its recognized relationship with the biomechanical functionality of the hoof. Hoof conformation can be assessed using objective measures or subjective scores. However, to date, there are limited data using either method in dairy goats. Therefore, the aims were to (1) develop a reliable method of assessing hoof conformation in dairy goats, and (2) compare two aspects of a subjective assessment against corresponding objective measures as a means of validation. A total of 1035 goats contributed photographs across 16 commercial dairy goat farms. Photographs were taken of the left front and left hind hoof in the lateral and dorsal aspect at five assessments across the goats′ first two lactations. Hoof conformation was assessed using five subjective scores (toe length, heel shape, fetlock shape, claw splay, and claw shape) and two objective measures (toe length ratio and claw splay distance). Following the training of two observers, high levels of inter and intra-reliability were achieved for both the subjective scores (>0.8 weighted kappa) and objective measures (>0.8 Lin′s concordance correlation coefficient). Two aspects of the subjectively assessed ordinal scores were compared with the objective measures with high levels of accuracy (>0.8). This suggests that the subjective scores may be a suitable alternative to more time-consuming objective measures when assessment is completed using photographs.

Convergent Evolution of Claw Shape in a Transcontinental Lizard Radiation.

Species occupying similar selective environments often share similar phenotypes as the result of natural selection. Recent discoveries, however, have led to the understanding that phenotypes may also converge for other reasons than recurring selection. We argue that the vertebrate claw system constitutes a promising but understudied model system for testing the adaptive nature of phenotypic, functional, and genetic convergence. In this study, we combine basic morphometrics and advanced techniques in form analysis to examine claw shape divergence in a transcontinental lizard radiation (Lacertidae). We find substantial interspecific variation in claw morphology and phylogenetic comparative statistics reveal a strong correlation with structural habitat use: ground-dwelling species living in open areas are equipped with long, thick, weakly curved, slender-bodied claws, whereas climbing species carry high, short, strongly curved, full-bodied claws. Species occupying densely vegetated habitats tend to carry intermediately shaped claws. Evolutionary models suggest that claw shape evolves toward multiple adaptive peaks, with structural habitat use pulling species toward a specific selective optimum. Contrary to findings in several other vertebrate taxa, our analyses indicate that environmental pressures, not phylogenetic relatedness, drive convergent evolution of similarly shaped claws in lacertids. Overall, our study suggests that lacertids independently evolved similarly shaped claws as an adaptation to similar structural environments in order to cope with the specific locomotory challenges posed by the habitat. Future biomechanical studies that link form and function in combination with genomic and development research will prove valuable in better understanding the adaptive significance of claw shape divergence.

Quantifying shape and ecology in avian pedal claws: The relationship between the bony core and keratinous sheath.

Terrestrial tetrapods use their claws to interact with their environments in a plethora of ways. Birds in particular have developed a diversity of claw shapes since they are often not bound to terrestrial locomotion and have heterogeneous body masses ranging several orders of magnitude. Numerous previous studies have hypothesized a connection between pedal claw shape and ecological mode in birds, yet have generated conflicting results, spanning from clear ecological groupings based on claw shape to a complete overlap of ecological modes. The majority of these studies have relied on traditional morphometric arc measurements of keratinous sheaths and have variably accounted for likely confounding factors such as body mass and phylogenetic relatedness. To better address the hypothesized relationship between ecology and claw shape in birds, we collected 580 radiographs allowing visualization of the bony core and keratinous sheath shape in 21 avian orders. Geometric morphometrics was used to quantify bony core and keratinous sheath shape and was compared to results using traditional arc measurements. Neither approach significantly separates bird claws into coarse ecological categories after integrating body size and phylogenetic relatedness; however, some separation between ecological groups is evident and we find a gradual shift from the claw shape of ground‐dwelling birds to those of predatory birds. Further, the bony claw core and keratinous sheath are significantly correlated, and the degree of functional integration does not differ across ecological groups. Therefore, it is likely possible to compare fossil bony cores with extant keratinous sheaths after applying corrections. Finally, traditional metrics and geometric morphometric shape are significantly, yet loosely correlated. Based on these results, future workers are encouraged to use geometric morphometric approaches to study claw geometry and account for confounding factors such as body size, phylogeny, and individual variation prior to predicting ecology in fossil taxa.

The Effect of Hoof Trimming on Milk Yield in Dairy Cattle

Hoof trimming is necessary for conformation and health of cattle. It is performed to prevent hoof lesions and maintenance the symmetry and shape of claw. At the same time it is a stress factor in dairy cattle. The aim of the study was to investigate the stress effects of hoof trimming on milk yield in healthy dairy cattle. Twenty Simmental dairy cattle were used as material. Functional hoof trimming was performed for all cattle. Dairy milk yield was measured before and after hoof trimming period. There were personal increases and decreases of milk yield recorded in animals. However, these increase and decrease were not statistically significant. As a result of this study hoof trimming is necessary for claw health and prevention for foot diseases. In healthy dairy cattle it causes stress and to decreases in milk yield. On the other hand the hoof trimming time, environmental factors such as flooring system and management style, and the animal related factors such as lactation period and stage, number of milking, breed and age affect the milk yield with hoof trimming positively or negatively. Keywords : Cattle, Dairy, Hoof, Milk, Simmental DOI : 10.7176/JSTR/5-5-07

Laminitis in dairy goats (Capra aegagrus hircus) on a low-forage diet

Dairy goats on high-concentrate diets attain high production levels, but at what cost? Here, ongoing lameness problems in a herd offered ad lib concentrates and roughages throughout their lifetime were...

Claw morphometrics in monitor lizards: Variable substrate and habitat use correlate to shape diversity within a predator guild.

Numerous studies investigate morphology in the context of habitat, and lizards have received particular attention. Substrate usage is often reflected in the morphology of characters associated with locomotion, and, as a result, claws have become well‐studied ecomorphological traits linking the two. The Kimberley predator guild of Western Australia consists of 10 sympatric varanid species. The purpose of this study was to quantify claw size and shape in the guild using geometric morphometrics, and determine whether these features correlated with substrate use and habitat. Each species was assigned a Habitat/substrate group based on the substrate their claws interact with in their respective habitat. Claw morphometrics were derived for both wild caught and preserved specimens from museum collections, using a 2D semilandmark analysis. Claw shape significantly separated based on Habitat/substrate group. Varanus gouldii and Varanus panoptes claws were associated with sprinting and extensive digging. Varanus mertensi claws were for shallow excavation. The remaining species’ claws reflected specialization for some form of climbing, and differed based on substrate compliance. Varanus glauerti was best adapted for climbing rough sandstone, whereas Varanus scalaris and Varanus tristis had claws ideal for puncturing wood. Phylogenetic signal also significantly influenced claw shape, with Habitat/substrate group limited to certain clades. Positive size allometry allowed for claws to cope with mass increases, and shape allometry reflected a potential size limit on climbing. Claw morphology may facilitate niche separation within this trophic guild, especially when considered with body size. As these varanids are generalist predators, morphological traits associated with locomotion may be more reliable candidates for detecting niche partitioning than those associated directly with diet.

Doryphoribius chetumalensis sp. nov. (Eutardigrada: Isohypsibiidae) a new tardigrade species discovered in an unusual habitat of urban areas of Mexico.

A new species, Doryphoribius chetumalensis, is described from specimens collected in the city of Chetumal (Quintana Roo state, Mexico). The species was found in a new and unusual habitat for urban tardigrades, i.e. the soil sediment accumulated on the border of streets. This discovery shows that tardigrades can live in this habitat, demonstrating once again the wide capacity of this taxon to tolerate adverse habitats, and to survive in environments with high anthropogenic impact. Doryphoribius chetumalensis sp. nov. differs from all the other species of the genus in having enlarged and wide bulbous base of the claws. Within Doryphoribius, it belongs to the zappalai group, and differs from the species in this group, not only in the claw shape, but also by the orange body colour, the smooth cuticle, the absence of a tooth in the wall of the buccal ring, and the absence of lunules under the claws. This is the first record of tardigrades, identified to species level, in Quintana Roo state. A taxonomic key of the Doryphoribius genus is also presented.

Appraisal of the fossil record ofHomarus(nephropid lobster), with description of a new species from the upper Oligocene of Hungary and remarks on the status ofHoploparia

AbstractThe fossil record of the clawed lobster genus,Homarus, is appraised. The taxonomic history ofHomarusandHoplopariais summarized, and a list of species recognized for each is provided. A tabulation of all fossil species of the family Nephropidae permits assessment of nephropid species diversity through time. A new species ofHomarus,H.hungaricus, is recorded from the upper Oligocene (Chattian) Mány Formation at Mány, northern Hungary. The species is known by a single specimen consisting of a partial cephalothorax, a pleon minus telson, and partial chelipeds.Homarusis now known by two extant species (H.americanusandH.gammarus) and six fossil taxa, one of Early Cretaceous (Albian;H.benedeni) and five of Cenozoic age (H.hungaricusn. sp.,H.klebsi,H.lehmanni,H.morrisi, andH.percyi). The new fossilHomarusdiffers from modern congeners in aspects of carapace and pleon ornamentation and, especially, cutter claw shape. This is the fourth Oligocene occurrence of a nephropid species; all areHomarusand all are from Western Europe.Homarusmakes its appearance in the fossil record in the Early Cretaceous (Albian) and then is not known again until the Paleogene, despite the fact that nephropid lobsters in general are well known from the Late Cretaceous. Nephropid lobsters are better known from the Cretaceous than from the Cenozoic. Both raw species numbers and numbers corrected (normalized) for epicontinental sea coverage show that shelf-dwelling nephropid lobsters were most diverse during the Late Cretaceous.

Points on the curve: An analysis of methods for assessing the shape of vertebrate claws.

The form of amniote claws has been extensively investigated, often with inferences about ecological association being drawn from studies of their geometry. Various methods have been used to quantify differences in the geometry of claws, but rarely have the underlying assumptions of such methods been addressed. Here, we use one set of bird claws and apply six methods (five that have been previously used, and a new one) that are tasked with comparing their shape. In doing so, we compare the (1) ability of these methods to represent the shape of the claw; (2) validity of the assumptions made about underlying claw geometry; (3) their ability to be applied unambiguously; and (4) their ability to differentiate between predetermined functional clusters. We find that of the six methods considered only the geometric morphometric approach reveals differences in the shapes of bird claws. Our comparison shows that geometry-based methods can provide a general estimate of the degree of curvature of claw arcs, but are unable to differentiate between shapes. Of all of the geometry-based approaches, we conclude that the adjusted version of the Zani (2000) method is the most useful because it can be applied without ambiguity, and provides a reliable estimate of claw curvature. The three landmarks that define that method (tip and base of the claw arc, plus the intersection between said claw arc and a line drawn perpendicular from the midpoint of tip and claw base) do not all bear biological significance, but relatively clearly circumscribe the length-to-height ratio of the claw, which relates to its curvature. Overall, our comparisons reveal that the shape of avian claws does not differ significantly between climbing and perching birds, and that the utilization of preordained functional clusters in comparative data analysis can hinder the discovery of meaningful differences in claw shape. J. Morphol. 278:150-169, 2017. © 2016 Wiley Periodicals,Inc.

Ontogenetic changes in diet and related morphological adaptations in Ocypode gaudichaudii

AbstractThere are conflicting reports as to whether Ocypode gaudichaudii individuals switch from carnivory as juveniles to deposit‐feeding primarily on diatoms as adults, or whether they expand diet range and become omnivorous with maturity. At the onset of deposit‐feeding, crabs develop specialized claws with truncated ends that they use to shovel sediment during foraging. Eighty‐eight crabs were collected from Culebra Island (Republic of Panama) to study how the diet of this crab shifts with changes in claw shape, mouthpart proportions, and setation, as well as gastric mill width. Forty‐four crabs had identifiable material in their foreguts: 30 had animal material, 12 had diatoms, and two had a mix of both. There were no differences between the gastric mill, mandibles, and the proximal endites of the first maxillipeds of predators and deposit‐feeders, but extra rows of plumose setae were present on the second maxilliped of deposit‐feeding crabs with carapace length (CL) >10.6 mm. All individuals with CL <12.3 mm and non‐truncated claws ate animals, but those with larger CL and truncated claws had animal, diatom, or mixed diets; hence, claw truncation does not restrict the crab's diet to diatoms but, instead, broadens the diet to include both animals and diatoms. Perhaps this is a strategy to balance the economics of foraging on animals and diatoms on medium to low‐energy beaches that lack the larger invertebrates that adults of other species of ghost crabs eat. More generally, our study shows that specialized feeding structures need not imply a narrow or specialist diet.