Shape Model Research Articles

Efficacy of modal curvature damage detection in various pre-damage data assumptions and modal identification techniques

The efficacy of modal curvature approach for damage localization is discussed in the paper in the context of input data. Three modal identification methods, i.e., Eigensystem Realization Algorithm (ERA), Natural Excitation Technique with ERA (NExT-ERA) and Covariance Driven Stochastic Subspace Identification (SSI-Cov), and four methods of determining baseline data, i.e., real measurement of the undamaged state, analytical function, Finite Element (FE) model and approximation of current experimental mode shape, are considered. Practical conclusions are formulated based on analysis of two cases. The first is a laboratory beam with a notch and the second is a stonemasonry historic lighthouse with modern restoration in its upper part. The analysis shows that NExT-ERA and SSI-Cov in combination with approximation of current mode shape provide high efficacy in damage localization alongside relatively straightforward determination of baseline data. It proves that the construction of advanced FE models of a structure can be replaced with a much simpler method of baseline data acquisition. Furthermore, the research shows the structural mode shapes identified with ERA may not always indicate the presence of damage.

Surface dynamics of small fast-rotating asteroids: Analysis of possible regolith on asteroid 2016 HO3

The Chinese Tianwen-2 mission is planned to explore and sample the near-Earth asteroid 2016 HO3, also named 469219 Kamo'oalewa. This paper intends to answer the question of whether 2016 HO3 has any regolith. A 3D model of an irregular shape was reconstructed from light curve data of 2016 HO3, with simulated impact craters embedded on its surface. We used numerical simulations to calculate the acceleration from gravity, fast rotation, and the van der Waals cohesive force. We found that the poles have a higher chance of hosting regolith, and the regolith may also rest on the walls of craters that face toward the rotation axis, making them potential sample collection sites. On the surface of 2016 HO3, the van der Waals force is strong enough to hold particles smaller than several centimeters against centrifugal force. Furthermore, we compare a pair of transient processes: thermal fatigue, which generates small particles, and micro-impacts, which remove the surface mass. Thermal fatigue is at least comparable to, and perhaps more efficient than, micro-impacts for 2016 HO3. Therefore, it is highly possible that regolith exists on the surface of 2016 HO3.

Ranking performances of Olympic-style weightlifters adjusted for body mass on the same scale for both sexes: A novel approach

ABSTRACT Males typically outperform females in Olympic-style weightlifting, as judged by total weight lifted, and similarly heavier athletes outperform lighter athletes. Current methods can standardise weightlifting performances across body mass to compare different body mass classes, but they do not address the sex gap. This study introduces a novel approach that puts male and female performances on a single unified scale, across the range of body mass, allowing mixed sex teams to be compared. The method uses standardised residuals or “z-scores” derived from models of performance regressed on sex and body mass fitted by GAMLSS (generalised additive models for location, scale and shape). Reference data come from the International Weightlifting Federation (IWF) world championships and Olympics 2017–2023. To ensure the validity of the model for ranking team performances in the future, results from 2000 to 2023 were compared and shown to be stable over time. A web application is available to aid athletes, coaches and health professionals to compare performances and monitor progress over time.

The scope and limits of fine-grained image and category information in the ventral visual pathway.

Humans can easily abstract incoming visual information into discrete semantic categories. Previous research employing functional MRI (fMRI) in humans has identified cortical organizing principles that allow not only for coarse-scale distinctions such as animate versus inanimate objects but also more fine-grained distinctions at the level of individual objects. This suggests that fMRI carries rather fine-grained information about individual objects. However, most previous work investigating fine-grained category representations either additionally included coarse-scale category comparisons of objects, which confounds fine-grained and coarse-scale distinctions, or only used a single exemplar of each object, which confounds visual and semantic information. To address these challenges, here we used multisession human fMRI (female and male) paired with a broad yet homogenous stimulus class of 48 terrestrial mammals, with 2 exemplars per mammal. Multivariate decoding and representational similarity analysis (RSA) revealed high image-specific reliability in low- and high-level visual regions, indicating stable representational patterns at the image level. In contrast, analyses across exemplars of the same animal yielded only small effects in the lateral occipital complex (LOC), indicating rather subtle category effects in this region. Variance partitioning with a deep neural network and shape model showed that across exemplar effects in EVC were largely explained by low-level visual appearance, while representations in LOC appeared to also contain higher category-specific information. These results suggest that representations typically measured with fMRI are dominated by image-specific visual or coarse-grained category information but indicate that commonly employed fMRI protocols may reveal subtle yet reliable distinctions between individual objects.Significance Statement While it has been suggested that functional MRI (fMRI) responses in ventral visual cortex carry fine-grained information about individual objects, much previous research has confounded fine-grained with coarse-scale category information or only used individual visual exemplars, which potentially confounds semantic and visual object information. Here we address these challenges in a multisession fMRI study where participants viewed a highly homogenous stimulus set of 48 land mammals with 2 exemplars per animal. Our results reveal a strong dominance of image-specific effects and additionally indicate subtle yet reliable category-specific effects in lateral occipital complex, underscoring the capacity of commonly employed fMRI protocols to uncover fine-grained visual information.

Development and validation of an ultrasound-based estimated fetal weight reference for Chinese twin pregnancy: a retrospective cohort study

BackgroundFetal growth monitoring is important for twin pregnancies. However, there has been no clinically validated tool for monitoring fetal growth of twin pregnancies in China. This study aims to develop and validate a chorionicity-specific growth chart of ultrasound estimated fetal weight (EFW) for Chinese twin pregnancies.MethodsThis retrospective cohort study included all twin pregnancies who delivered two live fetuses with gestational age ≥ 34 weeks without severe obstetric complications at a tertiary hospital from January 2007 to March 2021. The participants were divided into a development set (delivered in or before December 2017) and a validation set (delivered in or after January 2018). Chorionicity-specific growth charts were created using the generalized additive models for location, scale, and shape (GAMLSS) based on the development set. The fetuses from the validation set were classified into three groups based on the last EFW: small-for-gestational-age (SGA) indicated by both the newly established twin charts and the Hadlock singleton chart currently used for twin pregnancies in China, suspected SGA indicated by only the singleton chart, and no SGA indicated by either chart. The incidence of neonatal outcomes among the three groups was then compared accordingly, including intensive care unit (NICU) stay length, respiratory diseases, and neurological disorders.ResultsThe development set included 883 twin pregnancies and a total of 6374 EFW measurements between 16 and 38 weeks of gestation, and the validation set included 801 twin pregnancies and 7630 EFW measurements. In the development set, monochorionic diamniotic (MCDA) twins had a significantly lower EFW compared to dichorionic diamniotic (DCDA) twins beginning at 26 weeks, with the difference gradually increasing thereafter, supporting the establishment of chorionicity-specific growth charts. Of the 1,602 twin neonates in the validation set, 103 (6.4%) were classified into the SGA group, 164 (10.2%) into the suspected SGA group, and 1335 (83.3%) into the no SGA group. The incidence of respiratory diseases and neurological disorders was comparable between the suspected SGA group and the no SGA group, but apparently higher in the SGA group. Meanwhile, NICU stay lengths were consistently longer for twins in the SGA group compared to the no SGA group (difference: 0.57, 95% CI: 0.31–0.83), with no significant differences observed between the suspected SGA and no SGA groups.ConclusionsThe fetal growth trajectories differed by chorionicity, with a lower EFW for MCDA twins beginning at 26 weeks. The establishment of chorionicity-specific growth chart could reduce overdiagnosis of SGA and improve fetal growth monitoring of twin pregnancies.

Rice Responses to the Stem Borer Diatraea saccharalis (Lepidoptera: Crambidae) by Infrared-Thermal Imaging: Implications for Field Management

Diatraea saccharalis (Fabricius) is a major pest of rice crops, and its early detection—before any visible plant damage occurs—is crucial to prevent yield losses and establish effective, rational control methods. This study aimed to model the infrared-thermal responses of rice cultivars to D. saccharalis infestation levels. Between 2019 and 2020, two experiments were conducted in a controlled environment using the cultivars IR 40 and BR IRGA 409, previously identified as having different resistance reactions. Rice plants grown in pots were manually infested with first-instar larvae of D. saccharalis, ranging from 0 to 10 caterpillars per plant, with the plants maintained in cages covered with voile fabric throughout the trial. After 30 days of infestation, the number of live and dead caterpillars, the number of damaged and healthy stems, and the dry mass of the aerial parts were evaluated. A generalized linear mixed model was applied to the data obtained from leaf temperature as a function of infestation level throughout the infestation period, using the F-test to detect significant differences between cultivars. Generalized Additive Models for Location, Scale, and Shape (GAMLSS) were fitted to the variables related to resistance. It was observed that leaf surface temperature is related to the level of infestation and could be used to detect susceptibility in IR 40. In both cultivars, leaf temperatures were higher within the first 15 days post-infestation.

Design and experiment of a deviation information detection mechanism for sugar beet harvesters based on agricultural machinery and agronomy integration

To address large geometric shape differences, poor ridge distribution straightness and the uncertain spatial distribution of beet roots during the harvesting period, as well as damage caused by the inaccurate row correction detection mechanisms of combine harvesters, this study conducts a design analysis and performance tests of deviation information detection mechanisms based on the integration of agricultural machinery and agronomy. The agronomic process of mechanized sugar beet production was analyzed, the geometric dimensions of root tubers under typical planting patterns of typical varieties in main sugar beet production areas were measured, and a three-dimensional geometric model of beet root tubers was established. A device for measuring ridge shape and root tuber distribution was designed, and agronomic parameters during the harvesting period, such as plant spacing, ridge height, unearthed height, and deviation distance of beet root tubers, were measured and analyzed. A spatial model of ridge shape and beet root tuber growth distribution on the ridge during harvesting was established. The overall structure of the deviation information detection mechanism was analyzed and designed, and the structural forms and key parameters of key mechanisms, such as left‒right swing detection and up‒down floating profiling, were designed on the basis of agronomic parameter analysis. Using the missed detection rate as the evaluation index, field performance tests of the deviation information detection mechanism were conducted. The results revealed that when the average forward speed of the harvester was 0.84 m/s, the average missed detection rate of the deviation information detection mechanism was 0.56%. This method has high adaptability and detection accuracy and achieves a high level of integration for agricultural machinery (detection spatial region of the detection mechanism) and agronomy (beet root distribution spatial region). This study provides a technical basis and methodological reference for improving the quality and efficiency of automatic row correction combined with harvesting operations for crops such as sugar beets.

SECEC Grammont Award 2024: The critical role of posture adjustment for range of motion simulation in reverse total shoulder arthroplasty preoperative planning.

The objective of this study was to compare simulated range of motion (ROM) for reverse total shoulder arthroplasty (rTSA) with and without adjustment for scapulothoracic orientation in a global reference system. We hypothesized that values for simulated ROM in preoperative planning software with and without adjustment for scapulothoracic orientation would be significantly different. A statistical shape model of the entire humerus and scapula was fitted into ten shoulder CT scans randomly selected from 162 patients who underwent rTSA. Six shoulder surgeons independently planned a rTSA in each model using prototype development software with the ability to adjust for scapulothoracic orientation, the starting position of the humerus, as well as kinematic planes in a global reference system simulating previously described posture types A, B, and C. ROM with and without posture adjustment was calculated and compared in all movement planes. All movement planes showed significant differences when comparing protocols with and without adjustment for posture. The largest mean difference was seen in external rotation, being 62° (SD 16°) without adjustment compared to 25° (SD 9°) with posture adjustment (p < 0.001), with the highest mean difference being 49° (SD 15°) in type C. Mean extension was 57° (SD 18°) without adjustment versus 24° (SD 11°) with adjustment (p < 0.001) and the highest mean difference of 47° (SD 18°) in type C. Mean abducted internal rotation was 69° (SD 11°) without adjustment versus 31° (SD 6°) with posture adjustment (p < 0.001), showing the highest mean difference of 51° (SD 11°) in type C. The present study demonstrates that accounting for scapulothoracic orientation has a significant impact on simulated ROM for rTSA in all motion planes, specifically rendering vastly lower values for external rotation, extension, and high internal rotation. The substantial differences observed in this study warrant a critical re-evaluation of all previously published studies that examined component choice and placement for optimized ROM in rTSA using conventional preoperative planning software.

Shape modelling reveals age-related knee bony shape changes in asymptomatic knees.

Osteoarthritis (OA) causes bony shape changes within the knee. Furthermore, the risk of developing OA increases with age. However, age alone does not cause OA. It is therefore important to understand the healthy age-related trajectories of knee shape before attributing these changes to OA. The aim of this study was to determine the association between bony knee shape and age using statistical-shape modelling (SSM). 96 participants received a CT scan of their knee. Three-dimensional models were created using manual segmentation. Separate SSM's for the distal femur and proximal tibia were created. Linear regression models were used to assess the association between age and femoral and tibial shape. Fourteen modes of the femoral and tibial SSM's captured 68% and 73% shape variation, respectively. Only femoral mode 3 and tibial mode 7 were associated with age. Increasing age was related to larger femoral bone volume and deepening of the femoral trochlear groove. Furthermore, increased age was associated with medial tibial plateau expansion. Aspects of bony femoral and tibial shape were significantly associated with aging, including femoral and tibial bone size, femoral trochlear groove, and medial tibial plateau area. Changes in knee morphology occur as a normal process of aging without osteoarthritis development. This may be a response to mechanical loading over time. Further research investigating the effect of these changes on loading in the knee may provide valuable information for knee health in older age.

Population-based in silico modeling of anatomical shape variation of the knee and its impact on joint loading in knee osteoarthritis.

Anatomical knee joint features and osteoarthritis (OA) severity are associated, however confirming causals link to altered knee loading is challenging. This study leverages statistical shape models (SSM) to investigate the relationship between joint shape/alignment and knee loading during gait in knee OA(KOA) patients to understand their contribution to elevated medial knee loading in OA. Musculoskeletal (MSK) models were created for the mean as well as the first eightSSM principal modes of variation (-3,-2,-1, +1, +2, +3 standard deviations for each mode) and used as input to a MSK modeling framework. Using an identical KOA gait pattern (i.e., joint kinematics and ground reaction forces), we ran simulations for each MSK model and evaluated medial compartment loading magnitude and contact distribution at the instant of first and second peak of knee joint loading. An increase in external rotation, posterior tibia translation and a decrease in medial joint space and medial femoral condylar size predisposed the medial compartment knee joint to overloading during gait. This was coupled with an anterior and medial shift in contact location with increasing external rotated tibial position and increasing posterior tibial translation with respect to the femur. Next, results also highlighted a posterior shift of the medial compartment loading location with decreasing medial joint space. This study provides important population-based insights on how knee shape and alignment predispose individuals with KOA to elevated medial compartmental knee loading. This information can be crucial in assessing the risk for medial KOA development and progression.

Computer-aided design and fabrication of nasal prostheses: a semi-automated algorithm using statistical shape modeling.

This research aimed to develop an innovative method for designing and fabricating nasal prostheses that reduces anaplastologist expertise dependency while maintaining quality and appearance, allowing patients to regain their normal facial appearance. The method involved statistical shape modeling using a morphable face model and 3D data acquired through optical scanning or CT. An automated design process generated patient-specific fits and appearances using regular prosthesis materials and 3D printing of molds. Manual input was required for specific case-related details. The developed method met all predefined requirements, replacing analog impression-making and offering compatibility with various data acquisition methods. Prostheses created through this method exhibited equivalent aesthetics to conventionally fabricated ones while reducing the skill dependency typically associated with prosthetic design and fabrication. This method provides a promising approach for both temporary and definitive nasal prostheses, with the potential for remote prosthesis fabrication in areas lacking anaplastology care. While new skills are required for data acquisition and algorithm control, these technologies are increasingly accessible. Further clinical studies will help validate its effectiveness, and ongoing technological advancements may lead to even more advanced and skill-independent prosthesis fabrication methods in the future.

Big data-based reference centiles for body composition in Korean children and adolescents: a cross-sectional study

BackgroundThe changes in body composition during puberty not only contribute to the differences in body composition between adult males and females but also have associations with growth problems and metabolic disorders, including obesity. Therefore, understanding the changes in body composition during the pubertal period and analyzing reference values based on race and gender are essential research resources. The objective of this study was to generate reference centiles for body composition on a monthly basis using an extensive dataset of body composition information from Korean children and adolescents.MethodsA total of 88,069 measurements from 22,515 children (11,062 boys and 11,453 girls) aged 7–16 years using a bioelectrical impedance analysis were included in the study after performing a Z-score-based data management procedure. Height, weight, body fat mass (BFM), and fat-free mass (FFM) were measured and used to derive body fat percentage (BF%), body mass index (BMI), fat mass index (FMI), and fat-free mass index (FFMI). Sex- and age-specific centiles were estimated using generalized additive models for location, scale, and shape with the Box-Cox Cole and Green distribution (i.e., lambda-mu-sigma method).ResultsThe sex- and age-related disparities in body composition were most pronounced when weight was partitioned into BFM and FFM. In boys, the FFM increased markedly during pubertal growth spurts, whereas BFM remained relatively stable. In girls, the BFM increased steadily, whereas the rate of FFM increased slowly. The BMI increased steadily with age in both sexes. However, when BMI was parsed into FMI and FFMI, it became clear that the FFMI increased substantially during pubertal growth in boys, whereas the FMI peaked around age 11 and then declined. Conversely, the FMI increased steadily in girls, albeit with a slowing rate in the increase of the FFMI beginning around age 12.ConclusionsThis study produced age- and sex-specific reference percentiles for body composition indices in Korean children and adolescents using extensive biometric data.

Assessing aortic morphology post aortic valve replacement using unsupervised hierarchical clustering and statistical shape modelling

Abstract Introduction There are different surgical procedures used to treat aortic valve disease such as aortic valve replacement (AVR), the Ozaki procedure, the Ross procedure, and the valve-sparing procedure. There may be postoperative side effects associated with aortic morphology. Computational analyses that assess morphology are thus necessary in such scenario. Statistical shape modelling is used to assess three-dimensional morphology, discover unique shape features, create mean shapes, and create shape modes that display morphological variability. Hierarchical cluster analysis is a machine learning method used to classify a population into subgroups. Both of these statistical methods were applied to aortic valve replacement patients to evaluate morphological variability after aortic valve replacement (AVR) surgery. Purpose The purpose of this study is to assess the aortic morphology of AVR patients, identify morphological differences between different surgical procedures, identify subgroups postoperatively using statistical shape modelling and hierarchical cluster analysis, and assessing possible correlations between the resultant clusters and function i.e. ejection fraction. Methods Computed tomography and cardiac magnetic resonance images were used to reconstruct aortas into 3D models using segmentation and 3D reconstruction software. For each patient, two models were created (i.e. ascending aorta only and aorta including the arch and the descending aorta). N=35 patients were included in the study. Statistical shape analysis was run to create templates and shape modes. Statistical environment and language software was used to run hierarchical cluster analysis. Results Overall, the hierarchical cluster analysis did not classify the aortas based on type of surgery, but most patients in the Ross group demonstrated morphological differences from the other surgical groups and many of the aortas belonging to the Ross group were clustered together in both clustering analyses. No significant differences between clusters were seen (p=0.47 for ascending, p=0.19 for whole aorta). No correlation was found between clusters and ejection fraction (p=0.75, r2&amp;lt;0.01), possibly indicating that post-AVR aortic morphology in this sample does not reflect overt functional changes. Conclusion Both statistical shape modelling and hierarchical cluster analyses were successful in assessing morphological variability and identifying subgroups in this population. This framework could therefore be extended to larger samples to inform on surgical decision-making allowing surgeons to choose the appropriate surgery for the patient or design prosthetic valves that are more customised to the patient’s anatomy.Cluster-Ejection Fraction Correlation

Deep‐Learning‐Based Facial Retargeting Using Local Patches

AbstractIn the era of digital animation, the quest to produce lifelike facial animations for virtual characters has led to the development of various retargeting methods. While the retargeting facial motion between models of similar shapes has been very successful, challenges arise when the retargeting is performed on stylized or exaggerated 3D characters that deviate significantly from human facial structures. In this scenario, it is important to consider the target character's facial structure and possible range of motion to preserve the semantics assumed by the original facial motions after the retargeting. To achieve this, we propose a local patch‐based retargeting method that transfers facial animations captured in a source performance video to a target stylized 3D character. Our method consists of three modules. The Automatic Patch Extraction Module extracts local patches from the source video frame. These patches are processed through the Reenactment Module to generate correspondingly re‐enacted target local patches. The Weight Estimation Module calculates the animation parameters for the target character at every frame for the creation of a complete facial animation sequence. Extensive experiments demonstrate that our method can successfully transfer the semantic meaning of source facial expressions to stylized characters with considerable variations in facial feature proportion.

A 3D Statistical Shape Model of the Right Ventricular Outflow Tract in Pulmonary Valve Replacement Patients Post-Surgical Repair.

Assessment of the right ventricular outflow tract and pulmonary arteries (RVOT) for percutaneous pulmonary valve implantation (PPVI) uses discrete measurements (diameters and lengths) from medical images. This multi-centre study identified the 3D RVOT shape features prevalent in patients late after surgical repair of congenital heart disease (CHD). A 3D RVOT statistical shape model (SSM) was computed from 81 retrospectively selected CHD patients (14.7 ± 6.8 years) who required pulmonary valve replacement late after surgical repair. A principal component analysis identified prevalent shape features (modes) within the population which were compared with standard geometric measurements (diameter, length and surface area) and between sub-groups of diagnosis, RVOT type and dysfunction. Shape mode 1 and 2 represented RVOT size and curvature and tapering and length, respectively. Shape modes 3-5 related to branch pulmonary artery calibre, conical vs. bulbous RVOTs and RVOT curvature, respectively. Tetralogy of Fallot, transannular patch type and regurgitant RVOTs were larger and straighter while conduit and stenotic types were longer and more cylindrical than other subgroups. This SSM analysed the main 3D shape features present in a population of RVOTs, exploiting the wide 3D anatomical information provided by routine imaging. This morphological information may have implications for PPVI patient selection and device design.

Small Area Estimation of Household Economic Indicators under Unit-Level Generalized Additive Models for Location, Scale and Shape

Abstract We propose a small area estimation model based on Generalized Additive Models for Location, Scale and Shape (SAE-GAMLSS) for the estimation of household economic indicators. SAE-GAMLSS relax the exponential family distributional assumption and allow each distributional parameter to depend on covariates. A bootstrap approach to estimate the MSE is proposed. The SAE-GAMLSS estimator shows a largely better performance than the well-known Empirical Best Linear Unbiased Predictor (EBLUP) under various simulated scenarios. Per-capita consumption of Italian and foreign households in Italian regions, in urban and rural areas, is estimated using SAE-GAMLSS. Results show that the well-known Italian North–South divide does not hold for foreigners.

Reference Values for Handgrip Strength, Five Times Sit-to-stand, and Gait Speed in Patients on Hemodialysis.

Low levels of muscle strength and function predict adverse clinical outcomes in patients on hemodialysis; however, reference values remain lacking. We described reference values for handgrip strength, five times sit-to-stand (STS-5), and 4-m gait speed in a large-scale sample in patients on hemodialysis. Baseline data from the SARCopenia trajectories and associations with adverse clinical outcomes in patients on HemoDialysis (SARC-HD) study were analyzed. Muscle strength was evaluated using handgrip strength and the STS-5, whereas physical performance was evaluated using usual 4-m gait speed before a midweek dialysis session. Sex- and age-specific smoothed reference curves for each test at the 3rd, 15th, 50th, 85th, and 97th percentiles were constructed using generalized additive models for location shape and scale. Comparisons between sex and age were also performed. Data from 1004 patients (39% female; 19 to 96 years; 49% ≥ 60 years) were analyzed. Declines in muscle strength and physical performance were observed with advancing age in both sexes. However, among males, muscle strength and performance were similar between 18 and 49 years of age. Males exhibited substantially greater performance in handgrip strength (10.3 kg, 95% confidence interval (CI) 9.1 to 11.4) and 4-m gait speed (-0.10 seconds, 95% CI: -0.14 to -0.05) compared to females. Older patients, independent of sex, exhibited poorer performance on most tests. Lower handgrip strength in the arm with arteriovenous fistula was observed in both sexes (males -2.3 kg, 95% CI: -2.8 to -1.7; and females -2.1 kg, 95% CI: -2.6 to -1.6). Reference values obtained in this study may be used in clinical and research settings to identify patients on hemodialysis with low physical function according to sex and age. Future studies should test these reference values as potential predictors of adverse clinical outcomes.

Canadian adult reference data for body composition, trabecular bone score and advanced hip analysis using DXA

DXA-derived reference data for visceral adipose tissue (VAT) and advanced hip analysis (AHA) parameters spanning the entire adult lifespan are limited. The purpose of this study was to develop age-, site- and sex-specific reference data for dual X-ray absorptiometry (DXA) -derived body composition, trabecular bone score (TBS) and advanced hip analysis (AHA) parameters across the adult lifespan. Adults (N = 908; female: 561 and male: 347) from Calgary and the surrounding area over the age of 20 years participated in this study. Participants received DXA scans of their hip (total hip [TH] and femoral neck [FN]), lumbar spine [LS], forearm [33 % site] and total body (iDXA, GE Lunar, GE Healthcare). Areal bone mineral density (aBMD, g/cm2) was captured at all sites, and body composition variables, including lean mass, fat mass and percent fat, were analyzed from the total body scan. VAT mass was assessed from total body DXA scans. Advanced hip analysis (AHA) was performed on hip scans and trabecular bone score (TBS) on the LS scans to assess bone quality. Site- and sex-specific centile curves and tables were generated using the Generalized Additive Models for Location, Scale, and Shape (GAMLSS) method. Clinicians and researchers can use these Canadian reference data as a tool to assess body composition, TBS and AHA parameters across the adult lifespan.

Three-dimensional characterization of sex differences in abdominal aortic aneurysm progression via vascular deformation mapping

Although abdominal aortic aneurysms (AAA) are more common in men, women are at greater risk for AAA growth/rupture. Vascular deformation mapping (VDM) utilizes deformable image registration to qualify and quantify 3D-AAA growth using computed tomography angiograms (CTA). In this study we leveraged VDM to investigate sex differences in AAA growth patterns. Patients with infra-renal AAA and ≥ 2 CTA were identified. Males and females were matched for age, hypertension, and smoking history. Patient characteristics, maximum diameter (Dmax), and AAA volume were obtained. CTA images were segmented, and VDM was conducted to quantify 3D AAA growth rate per year (GR, cm/year). Statistical shape modeling was utilized to compute mean aneurysm shapes and 3D GR. Average GR was evaluated at specific regions of the aortic surface for males and females. Seventeen males and 17 females were matched. At the individual level, there were no sex differences in changes in Dmax or AAA volume. However, females had larger GR across the anterior and right lateral AAA (1.33 vs 0.89 and 1.56 vs 0.74 cm/year, respectively), despite no difference in posterior or left lateral AAA GR. Despite comparable changes in Dmax, AAA volume, and GR magnitude, women demonstrated a more eccentric, anterior-predominant, AAA growth pattern.

Photometry and Models of Seven Main-Belt Asteroids

The China Near-Earth Object Survey Telescope (CNEOST) conducted four photometric surveys from 2015 to 2018 using image processing and aperture photometry techniques to obtain extensive light curve data on asteroids. The second-order Fourier series method was selected for its efficiency in determining the rotation periods of the observed asteroids. Our study successfully derived rotation periods for 892 asteroids, with 648 of those matching values recorded in the LCDB (for asteroids with U &gt; 2). To enhance the reliability of the derived spin parameters and shape models, we also amassed a comprehensive collection of published light curve data supplemented by additional photometric observations on a targeted subset of asteroids conducted using multiple telescopes between 2021 and 2022. Through the application of convex inversion techniques, we successfully derived spin parameters and shape models for seven main-belt asteroids (MBAs): (2233) Kuznetsov, (2294) Andronikov, (2253) Espinette, (4796) Lewis, (1563) Noel, (2912) Lapalma, and (5150) Fellini. Our thorough analysis identified two credible orientations for the rotational poles of these MBAs, shedding light on the prevalent issue of “ambiguity in pole direction” that often accompanies photometric inversion processes. CNEOST continues its observational endeavors, and future collected data combined with other independent photometric measurements will facilitate further inversion to better constrain the spin parameters and yield more refined shape models.