Shallow Fault Research Articles

Characteristics and distribution of geohazards since the middle miocene of the Xisha sea area, South China Sea

Geological hazards can cause significant harm to the construction and maintenance of reef infrastructure projects in the Xisha Sea area. This study uses high-resolution multichannel earthquake data, single-channel seismic profiles, and multi-beam survey data to identify and analyze the geological hazards in the Xisha Sea area since the Miocene. Based on the geophysical data interpretation, the destructive geological disaster factors that are active, such as active faults, shallow gas, diapers, landslides, multistage scarps (steps), scouring troughs, and canyons, as well as the restrictive geological disaster factors without activity ability, such as buried paleochannels, pockmarks, reefs, and undersea volcanoes, are identified and analyzed. This paper discusses the causes and hazards of geological hazards and, for the first time, draws a comprehensive plane layout of the geological hazards. The above analysis demonstrates that the scarps are mainly located around the atolls or platforms, and the slope of the southeast seabed topography is significantly higher than that of the northwest. There are seven medium and large landslides, mainly located around Yongxing Plateau and Yongle Plateau, caused by gravity and faulting. Shallow gas is mainly developed in the southern part of the North Reef and is indicated by diaper structures, faults, and gas chimneys. A series of shallow faults are developed in the study area, mainly steep normal faults. The scouring troughs are primarily distributed near the Yongxing Platform, Zhongjian North Platform, and Huaguang Platform. Submarine canyons are primarily located in the northern and southern parts of the Shidao Platform. Affected by multiple factors such as hydrodynamic conditions, the stability of sedimentary layers, and sediment supply, the scour degree varies, with the general depth ranging from several meters to several hundred meters. Underwater infrastructure in the study area should not be constructed in areas with active and destructive geological hazards. The results of this study can serve as a guide for further exploration in the Xisha area and disaster prevention and mitigation during construction activity in the area.

Modulation of Seismic Radiation by Fault-Scale Geology of the 2016 Mw 6.0 Shallow Petermann Ranges Earthquake (PRE) in Central Australia

ABSTRACTUnderstanding the modulatory influence of fault-scale geology on seismic behavior of earthquake faults is central to determining the physics of faulting and seismic hazard analysis. Although laboratory experiments predict that seismic parameters can be modulated by fault-scale geology, there is scant empirical evidence of this process at field scale due largely to a lack of shallow earthquakes of which causative faults can be mapped to known bedrock structure. The 20 May 2016 Mw 6 Petermann Ranges earthquake (PRE) is the best-recorded continental event in Australia to date, and it is an excellent candidate to investigate the possible link between seismic parameters and fault-scale geology as its causative fault has previously been linked to known bedrock structure using distributions of aftershocks, surface observations, and geophysical mapping. In this study, we analyze strain energy partitioning of PRE by determining seismic radiation efficiency (0.31) and apparent stress (0.34 MPa) together with previously estimated stress drop (2.2 MPa) and find that the combination of these macroseismic parameters deviates from that expected of a shallow immature fault in intraplate continental regions typically characterized by large recurrence intervals. It instead appears to have mimicked a mature fault, which we attribute to the characteristics of the causative fault confined to mechanically weaker, phyllosilicate-rich foliations of the bedrock that have anomalously lower fracture energy. Therefore, PRE rupture suggests the presence of a spectrum of shallow (<20 km) fault slip behavior modulated by fault-scale geology.

Fine structure interpretation and reservoir forming characteristics analysis of Jurassic Badaowan Formation in Madong area of Xiayan fault zone

Fine structural interpretation is one of the effective methods to find favorable structural traps and targets. Aiming at the fault interpretation of Jurassic Badaowan Fm in Madong area of Xiayan fault zone is not fine and structural characteristics are not implemented, the structural characteristics of Jurassic Badaowan Fm are implemented and favorable traps are found through the study of seismic, well logging and geological comprehensive methods. The results show that the structure of Jurassic Badaowan Fm in Madong area is high in the north and low in the south. The first member of Badaowan Fm is a delta front subaqueous distributary channel deposit, which is a hydrocarbon enrichment zone. Oil and gas are adjusted along the relay of deep and shallow faults, and the great fault zone and the inherited uplifting zone are favorable accumulation areas of Jurassic Badaowan Fm in Madong area. In this paper, the relationship between deep and shallow fault system and hydrocarbon distribution of Badaowan Fm in Madong area is systematically reviewed for the first time. Combined with the palaeohigh distribution, three favorable hydrocarbon accumulation zones are identified, which provides favorable targets for exploring the hydrocarbon accumulation potential of Badaowan Fm.

Shear-induced distortion of clay minerals aids in dynamic weakening of shallow faults during earthquakes

Coseismic faulting may activate complicated physicochemical processes in the fault zone through both mechanical deformation and frictional heating. While plenty of work emphasizes the great importance of thermal effects on dynamic fault weakening, less attention has been paid to the mechanochemical effects. We study the effects of mechanochemical changes of chlorite on its dynamic weakening process via low- and high-velocity friction experiments, simultaneous thermal analysis, X-ray diffraction, microstructural observation, and numerical modeling in this work. With higher degrees of deformation, the experimentally sheared chlorite samples generally show more pronounced reductions in the onset temperature of thermal decomposition (Td0; from 561°C to 189°C in the extreme case) and more striking increases in the reaction rate. The exponential-decay formula can well describe the relation between Td0 and the mechanical work (integral of shear stress with respect to displacement) in the shear deformation. Moreover, the presence of pore water and the variation in chlorite content could significantly affect the mechanochemical changes of the sheared chlorite-bearing samples. Taking the markedly lowered Td0 as the characteristic temperature leading to thermal softening of asperity contacts, numerical modeling shows that flash weakening of chlorite-rich samples can be significantly promoted, dwarfing the thermochemical pressurization that is also enhanced by mechanochemical effects though. This is largely supported by high-velocity experiments (∼m/s) performed on the pre-deformed chlorite samples, which show both lower peak friction and fracture energy, and earlier activation of dynamic weakening. Clearly, shear deformation plays a key role in aiding thermally-activated mechanisms in weakening faults and facilitating rupture propagation during earthquakes.

Shallow Composition and Structure of the Upper Part of the Exhumed San Gabriel Fault, California: Implications for Fault Processes

Quantifying shallow fault zone structure and characteristics is critical for accurately modeling the complex mechanical behavior of earthquakes as energy moves within faults from depth. We examine macro- to microstructures, mineralogy, and properties from drill core analyses of fault-related rocks in the steeply plunging ALT-B2 geotechnical borehole (total depth of 493 m) across the San Gabriel Fault zone, California. We use macroscopic drill core and outcrop-sample analyses, core-based damage estimates, optical microscopy, and X-ray diffraction mineralogic analyses to determine the fault zone structure, deformation mechanisms, and alteration patterns of exhumed deformed rocks formed in a section of the fault that slipped 5-12 million years ago, with evidence for some Quaternary slip. The fault consists of two principal slip zones composed of cohesive cataclasite, ultracataclasite, and intact clay-rich, highly foliated gouge within upper and lower damage zones 60 m and 50 m thick. The upper 6.5 m thick principal slip zone separates Mendenhall Gneiss and Josephine Granodiorite, and a lower 11 m thick principal slip is enclosed within the Josephine Granodiorite. Microstructures record overprinted brittle fractures, cohesive cataclasites, veins, sheared clay-rich rocks, and folded foliated and carbonate-rich horizons in the damage zones. Carbonate veins are common in the lower fault zone, and alteration and mineralization assemblages consist of clays, epidote, calcite, zeolites, and chloritic minerals. These data show that shallow portions of the fault experienced fluid-rock interactions that led to alteration, mineralization, and brittle and semi-brittle deformation that led to the formation of damage zones and narrow principal slip zones that are continuous down-dip and along strike.

Formation mechanism and hydrocarbon exploration significance of the box fold in the Qiulitage structural belt, the Kuqa Depression, Tarim Basin, China

Clarifying the deformation characteristics and formation mechanisms of the box fold in the eastern Qiulitage structural belt can provide important references for the reconstruction of the evolution process and petroleum exploration in the Qiulitage structural belt. As a result of the deep geological structure displayed by seismic data and characteristics of faults and fractures within the box fold, the mechanical mechanism and structural evolution of the box fold in the eastern Qiulitage structural belt were investigated, along with the genesis and significance of hydrocarbon exploration of faults and fractures within the box fold. The results show that the surface box fold in the Qiulitage structural belt was formed via the conjugate kinking of the supra-salt structural layer, driven by the intensive southward compression during the Middle and Late Himalayan movements. The box fold has experienced three evolution stages, namely, the tectonically-inactive stage before the deposition of the Kuqa Formation, the fold rudiment stage during the early to middle deposition of the Kuqa Formation (Kuqa period), and the stage of fold finalization and uplift-denudation. The front flank of the box fold develops north-dipping thrust faults and network fracture systems formed during the early to middle Kuqa period and cemented by gypsum due to the precipitation of deep, high-salinity formation water. However, later faulting can cut and dislocate the cement. The upper fold core develops north-dipping tensile faults and near EW tensile fractures, while the lower fold core is associated with small back-thrust structures and near NS shear fractures. The neutral plane is expected to be in the middle-lower part of the fold. The back-flank of the box fold develops south-dipping back-thrust faults and near EW interlayer shear fractures caused via interlayer detachment. The core and back flank of the fold were less affected by the high-salinity formation water, leaving faults and fractures with no considerable cementation. The kink zone and its surroundings have high storage and flow capacities and thus the potential to and develop oil and gas reservoirs. Correctly interpreting kink zones in concealed areas can help expand the scale of original oil and gas reservoirs or discover new petroleum exploration domains. In the Qiulitage structural belt, the connection between deep and shallow fault systems leads to the migration of deep hydrocarbons to shallow layers and subsequent accumulation. The structural-lithologic oil and gas reservoir formed in the Paleogene thin sand layers of the upper part of the Lower Cretaceous and the structural oil and gas reservoir formed in supra-salt sandstone layers of the surface box fold are among The potential exploration domains in shallow layers.

Linear Inversion of Fluvial Topography in the Northern Apennines: Comparison of Base‐Level Fall to Crustal Shortening

AbstractFluvial terraces, longitudinal river profiles, and growth strata carry comparable records of the deformation history in tectonically active mountain belts. In the northern Apennines, these markers are preserved across an actively uplifting, steep mountain front. We take advantage of this setting to model base‐level fall histories reconstructed from a linear inversion of fluvial topography on six transverse catchments spanning 110 km along the strike from Bologna to Parma. We compare these histories to records of crustal shortening preserved in growth strata. The fluvial inversion model is based on the detachment‐limited stream‐power model and considers the variable erodibility of bedrock lithology. Uplift is assumed to be spatially uniform at the catchment scale and crudely in balance with long‐term 10Be terrestrial cosmogenic nuclide (TCN) erosion rates that range from ∼0.3 to 0.7 mm yr−1. The model predicts rates of base‐level fall that are comparable with published rates of fault slip from growth strata and incision from terrace deposits. The modeling demonstrates how orogenic shortening and topographic growth are nonuniform and partitioned along the strike of the Apennine mountain front. Rivers record steady uplift in the last ∼1 Myrs, temporally coincident with overfilling of the Po Plain and reduction of shallow fault slip, supporting a proposed switch from thin‐to thick‐skinned crustal shortening. These results are a novel example of base‐level fall records assembled from both the erosional source and depositional sink and highlight the versatility and challenges of fluvial inversion modeling.

Effects of the accretionary wedge and sedimentary layers on subduction zone earthquake ruptures and ground motion: 2-D numerical simulations

SUMMARYLow-velocity accretionary wedges and sedimentary layers overlying continental plates are common in subduction zones. These low-velocity sedimentary structures should be considered to accurately model ground motions and estimate coseismic slip on subsurface faults. First, we simulated the rupture process of the 2011 Mw 9.0 Tohoku-Oki earthquake in 2-D dynamic rupture models and found that the co-existence of the accretionary wedge and sedimentary layer can cause an approximately 60 per cent increase in the shallow coseismic slip. Considering the inelastic attenuation, wave reverberations in the accretionary wedge and sedimentary layer significantly amplified offshore ground acceleration at 0.1–0.5 Hz by factors of 1–5 and prolonged ground motion durations. Additionally, high-frequency acceleration at 0.5–2.0 Hz is also amplified on the accretionary wedge with a maximum factor of 5. Our Tohoku-Oki earthquake model reproduces the observed coseismic slip qualitatively, but the model also results in higher scaled energy, due to the overestimation of radiated energy in 2-D models and the inadequate plastic properties in the accretionary wedge and sedimentary layer. We further simulated a suite of earthquake scenarios where the updip rupture terminates at different depths. Our results show that a sedimentary layer enhances coseismic slip in all cases, while an accretionary wedge can decrease the slip when the shallow fault has a strengthening frictional behaviour. Additionally, the effects on slip diminished when the extent of updip rupture becomes deeper. However, offshore ground acceleration at 0.1–0.5 Hz is still amplified due to the dynamic wave effects in the two structures. Furthermore, in the scenarios when earthquake rupture reaches the shallow fault, the existence of an accretionary wedge can cause amplified high-frequency acceleration (0.5–2.0 Hz) near the trench. Our results indicate that compared to those subduction zones with neither an accretionary wedge nor sedimentary layers, subduction zones featuring a co-existence between an accretionary wedge and sedimentary layers are susceptible to host earthquakes with larger shallow slip and amplified offshore ground motions.

Seismicity Induced at the Northern Dead Sea Transform Fault, Kinneret (Sea of Galilee) Basin, by Shallow Creep Involving a Salt Body

AbstractIn October 2013 and July–August 2018, two extensive earthquake swarms shook the northern reaches of Lake Kinneret (Sea of Galilee). Former studies explored the swarms, resulting in discrepant depths and mechanisms. Here, we attempt to settle the discrepant interpretations using alternative seismological methods and some unpublished data from borehole seismometers. We propose a hypothesis for the faulting phenomenon focusing on the interaction of the two plate boundary segments that step‐over the northern Kinneret depocenter: a creeping segment in the south and a locked segment in the north. The energy accumulated from the interaction induces earthquake swarms from time to time. A shallow fault patch (from the surface down to 1.5 ± 1.0 km) south of the swarms is thought to creep in association with a salt formation underlying some of the basin fill. We use regional seismograms, including two near‐source borehole stations, to refine the characteristics of the swarms. We test hypocentral and centroid depths using several methods and different velocity models and corroborate shallow ruptures: the majority are shallower than 6 km (all shallower than ≤10 km). The hypocentral locations and focal mechanisms suggest shallow NW‐SE normal faults splaying from the tip of the creeping segment in a horsetail pattern. We test the hypothesis by Coulomb stress calculations that show stress concentration at the step‐over interaction zone, consistent with focal locations and mechanisms of the earthquake swarms.

Spatiotemporal Evolution of the Seismicity in the Alto Tiberina Fault System Revealed by a High‐Resolution Template Matching Catalog

AbstractThe Alto Tiberina Fault system, located in the Northern Apennines (Italy), consists of a low angle normal fault (LANF) which radiates micro‐seismicity that can be explained by continuous creep. On top of the LANF, a network of syn‐ and antithetic high angle faults frequently hosts seismic swarms, one of which has been associated with a transient aseismic deformation signal. To study in detail the seismicity and its relationships with aseismic deformation processes occurring in this fault system, we apply template matching on seismic data recorded at an array of borehole stations, to derive a high‐resolution earthquake catalog. Thanks to the additionally detected events, we are able to reveal time periods of increased spatial‐ and temporal clustering during an aseismic deformation event. This reflects the complex evolution of aseismic slip together with the complexity of the shallow fault system. Along the LANF, we observe a bimodal type of seismicity, with diffuse seismicity active continuously, and short‐lived bursts of seismicity that could indicate rapid fluid releases. We additionally identify repeating earthquakes. These events not necessarily match a simple creep model and therefore open the possibility for new models to explain the seismicity along the LANF.

Structural characteristics of shallow faults in the Delaware Basin

The Delaware Basin of Texas and New Mexico is experiencing elevated levels of seismicity. There have been more than 130 earthquakes with local magnitudes of at least 3.0 recorded between 2017 and 2021, with earthquakes occurring in spatiotemporally isolated and diffuse clusters. Many of these events have been linked to oilfield operations such as hydraulic fracturing and wastewater disposal at multiple subsurface levels; however, the identification and characterization of earthquake-hosting faults have remained elusive. There are two distinct levels of faulting in the central region of the basin where most earthquakes have been measured. These fault systems include a contractional basement-rooted fault system and a shallow extensional fault system. Shallow faults trend parallel to and rotate along with, the azimuth of S HMAX, are vertically decoupled from the basement-rooted faults, accommodate dominantly dip-slip motion, and are the product of more recent processes including regional exhumation and anthropogenic influences. The shallow fault system is composed of northwest–southeast-striking, high angle, and parallel trending faults which delineate a series of elongate, narrow, and extensional graben. Although most apparent in 3D seismic reflection data, these narrow elongate graben features also are observed from interferometric synthetic aperture radar (InSAR) surface deformation measurements and can be delineated using well-located earthquakes. In contrast to the basin-compartmentalizing basement-rooted fault system, shallow faults do not display any shear movement indicators, and they have small throw displacement given their mapped length, producing an anomalous mean throw-to-length ratio of 1:1000. These characteristics indicate that these features are more segmented than can be mapped with conventional subsurface data. Much of the recent seismicity in the south-central Delaware Basin is associated with these faults and InSAR surface deformation observations find that these faults also may be slipping aseismically.

Transient fault creep on the Xidatan (Tibet) fault driven by viscoelastic relaxation following the 2001 Kokoxili earthquake

AbstractRecent geodetic observations of shallow fault creep have illuminated increasingly complex, time-dependent slip behaviors, including quasi-steady creep and temporary accelerations, termed slow-slip events. We documented two decades of deformation on the Xidatan fault on the Tibetan Plateau measured by radar interferometry during 2003–2010 and 2015–2020 CE, to probe the temporal evolution of shallow creep and illuminate the underlying mechanisms. The geodetic observations reveal an ~80-km-long fault section with temporally decaying creep along the Xidatan fault, one of the current seismic gaps along the Kunlun fault. The transient creep is likely driven by postseismic deformation processes, dominated by viscoelastic relaxation after the 2001 Kokoxili earthquake, rather than triggered by the coseismic rupture. The transient creep behavior, indicating rate-strengthening frictional properties of the fault, contradicts the inference of locking along the Xidatan fault, based on geodetic imaging before the Kokoxili earthquake and on historical ruptures. We propose that, during the interseismic period, the frictionally unlocked shallow portions of the fault are located in the stress shadow cast by the deeper locked asperities, but they creep at resolvable rates when exposed to transient stress and stressing rate increases. We argue that stress interactions in the triple junction of the Kusai Hu, Xidatan, and Kunlun Pass faults promote complex slip behaviors throughout the earthquake cycle.

Visualization of shallow subseafloor fluid migration in a shallow gas hydrate field using high-resolution acoustic mapping and ground-truthing and their implications on the formation process: a case study of the Sakata Knoll on the eastern margin of the Sea of Japan

Acoustic mapping enables an understanding of the surface distribution of shallow gas hydrate (GH) and related products. Acoustically characteristic materials such as fluid-seepage-related methane-derived authigenic carbonate and/or shallow GHs, may be widely distributed beneath the shallow seafloor of the Sakata Knoll. High-amplitude reflectors over the knoll are the top of gas-bearing permeable layers and connect to the reverse fault at the foot of the knoll. Shallow GH and bacterial mats were observed at the high-amplitude layer cut by depression and/or the locally disturbed seafloor. Acoustic blanking zones observed on the sub-bottom profiler sections are current gas migration routes from the depth to the seafloor. Optical observations indicate that fluid seepage is not active in the current seafloor, and it is not necessarily observed above the acoustic blanking zones or shallow faults reaching the seafloor. In the Sakata Knoll, the tectonically formed reverse fault and gas-bearing permeable layers play more important roles in fluid migration from depth to the summit area of the knoll compared to acoustic blanking and shallow faults. The depression at the summit area of the Sakata Knoll was formed by the dissociation of a shallow GH at around the last glacial maximum. Limited fluid seepage is currently witnessed within and around the depression and it is less extensive than that in the past. Such knolls, with tectonically formed large faults and an anticline are abundant in the area and they can be good reservoirs for shallow GH along the eastern margin of the Sea of Japan.

Detailed shallow structure of the seismogenic fault of the 1976 Ms7.8 Tangshan earthquake, China

In 1976, an Ms7.8 strong earthquake occurred in the Tangshan region of Northeast China within an ancient craton. In this study, we conducted shallow seismic exploration, drilling-based exploration, and exploratory trench excavation of ground fissures in the Tangshan Fault Zone and obtained a high-resolution shallow seismic profile. Through analysis of its lithology and sedimentary cycle, we constructed a composite drilling profile across the faults. Coupled with the shallow fault combination patterns identified from the exploratory trenches, the profile reveals that the Guye-Nanhu Fault was the shallow response fault in the seismogenic structure of the Tangshan earthquake. This fault is a strike-slip fault with a positive flower structure; the reverse fault branches become progressively steeper with depth and converge downward toward the vertical main strike-slip fault. A high-angle thrust fault is located to the west of the main strike-slip fault, and a series of small-scale normal faults appear in front of this fault, owing to local extension. The tectonic form revealed by the deep seismic reflection profiles further supports the superficial tectonic model. The near-NEE orientation of the stress field in North China and the lower strike-slip movement component of the Tanlu Fault Zone facilitate faulting in the Tangshan–Hejian–Xingtai Fault Zone, which lies diagonally in the middle rectangular area of the North China Plain faulted basin. The detailed structural model of the seismogenic fault obtained by various detection methods is of great significance for understanding the seismogenic mechanism of the Tangshan earthquake.

Ambient Noise Attenuation Tomography Reveals an Asymmetric Damage Zone Across San Jacinto Fault Near Anza, California

AbstractWe perform seismic attenuation tomography of the shallow structure for the San Jacinto Fault in the Ramona Reservation of southern California. The study uses ambient seismic noise recorded by a linear array of 65 3‐C sensors across the fault. We extract amplitude decay information, with uncertainty, from noise interferometry functions. To account for strong heterogeneities in the complex shallow fault zone structure, we apply a frequency‐dependent amplitude correction for focusing/defocusing effects using inverted phase velocity maps obtained by solving the transport equation. We then estimate the attenuation structure based on the linear station‐triplet method for both Love and Rayleigh waves. The attenuation tomography indicates strong attenuation correlated with known San Jacinto Fault surface traces. The Love wave attenuation tomography reveals an asymmetric damage zone that exists primarily on the fault side with faster seismic velocity, consistent with earthquake ruptures on a fault bimaterial interface with preferred propagation direction to the northwest.

The geometry of active shortening in the northwest Himalayas and the implications for seismic hazard

SUMMARYLarge thrust faults accommodate the convergence between India and Tibet along the southern margin of the Himalaya and have a history of producing great earthquakes that cause widespread damage. Along most parts of the Himalaya, there is geomorphological evidence that these thrusts can rupture to the surface in Mw >8 earthquakes. However, in the Himalayan state of Jammu & Kashmir (NW India), the thrust faults are blind and large-scale folding is the only expression of active deformation at the surface, making it difficult to assess the seismic hazard in this region. In this paper, we use field, satellite, and seismological observations to determine the fault geometry in Jammu & Kashmir. We then estimate the ground motions from potential earthquakes in the region using models of the seismic wavefield that would be generated if the thrust fault beneath Jammu & Kashmir were to rupture. We find that earthquakes that rupture the buried, shallow part of the locked Main Himalayan Thrust could generate peak ground velocities that are >3 times larger than earthquakes of the same magnitude on its deeper portions. We also model the ground motions that would result from the thrust fault geometries representative of different parts of the Himalayan arc. These simulations show that even seemingly minor variations in the shallow fault geometry can lead to large differences in the expected ground motions, highlighting the importance of accurately determining the shallow geometry of thrust faults along the margins of mountain ranges for estimating seismic hazard.

Regolith and host rock influences on CO2 leakage: Active source seismic profiling across the Little Grand Wash fault, Utah

Understanding carbon dioxide (CO2) reservoir to surface migration is crucial to successful carbon capture and sequestration approaches; especially fault/reservoir interactions under injection pressure. Through seismic imaging, we explore regolith and shallow stratigraphy across the Little Grand Wash fault. The presence of natural CO2 seeps, travertine and tufa deposits confirm modern and ancient fault-controlled CO2 leakage. We consider this an analogue for a long-failed sequestration site. We estimate bulk porosity and fracture density for host rock, regolith, and fault zone from petrophysical relationships. When combined with existing geochemical and geological data, we characterize a 60 m wide damage zone that represents the primary surface delivery channel for CO2 originating from reservoir depths. Within this damage zone, low seismic velocities suggest sediments have formed through host rock chemical dissolution or mechanical weathering. In contrast, velocities within the adjacent host rock are consistent with low fracture density clastic rocks. We measure anomalously high seismic velocities within the fault zone along one profile that best represents a sealed (cemented/plugged) low permeability, relic flow channel. This suggests that shallow fault zone permeability varies along strike. While regional stress changes may account for decadal- to millennial-scale changes in CO2 pathways, we speculate that the total fluid pressure has locally reduced the fault's minimum horizontal effective stress; thereby producing both low- and high-permeability fault segments that either block or promote fluid migration. Studying CO2 migration in this system can inform potential risks to future sequestration projects and guide monitoring efforts.

Analysis of the Spatiotemporal Evolution of the Maurienne Swarm (French Alps) Based on Earthquake Clustering

AbstractBetween August 2017 and March 2019, an intense seismic swarm was recorded in the Maurienne valley in the north of the Belledonne massif (Western French Alps). In order to study the spatiotemporal evolution of the Maurienne swarm, we created a high‐resolution catalog based on template matching, double‐difference relocation, and moment magnitudes. The catalog includes 71,064 events with a maximum moment magnitude of 3.5 and a magnitude of completeness of 0.7. The seismic activity is interpreted as the reactivation of an N80 strike‐slip fault system called Fond de France. Moreover, earthquake relocation reveals the presence of a shallower fault system with the same strike, but opposite dip direction and smaller size. The presence of two distinct fault systems may explain the observed variation of the b‐value with depth. The seismicity migrated asymmetrically in all directions during the course of about 15 months. Shorter migrations lasting 2–3 days are also observed. The different migration patterns suggest that the swarm is driven by several mechanisms, possibly pore‐pressure diffusion, aseismic slip, and earthquake interactions.

The Investigation of Shallow Structures at the Meishan Fault Zone with Ambient Noise Tomography Using a Dense Array Data

Seismic monitoring relies on seismography. However, the high cost of seismic equipment has presented a challenge to increasing the density of seismic networks in previous decades. Due to the large station spacing and inferior coverage of stations, this situation has led to a loss of detail in many research results. Along with the improvement of technology, the problem of increasing the density of seismographic observations is no longer an impossible issue. This makes it feasible to deploy a dense seismic network for monitoring earthquakes. This study deployed a linear dense array across the Meishan Fault in west-southern Taiwan for the purpose of analyzing the shallow fault zone structure. While the 1906 Meishan earthquake occurred in a period when historic records were available, the surficial geology surveys of the Meishan Fault are challenging because farming and construction engineering have obscured the outcrop. Early surveys of the Meishan Fault were mainly seismic surveys. In recent decades, over thirty profiles have been completed. However, the reflection seismic records had poor signal-to-noise ratios because the Meishan Fault is buried under thick sediments. Thus, the shallow structure of the Meishan Fault is still not known in detail. This study applied double-beamforming tomography to a dense seismic array to obtain high-resolution images of the Meishan Fault zone. The result shows that there is a south-dipping interface near the fault trace as indicated by the Central Geological Survey of Taiwan. In addition, we observed velocity transitions of perturbation profiles that may be caused by a branch fault, the Chentsoliao Fault. This study demonstrates that the ambient noise double beamforming method is an effective tool for imaging the detailed shallow structure along with the dense seismic array.

Plate‐Rate Frictional Behavior of Sediment Inputs to the Hikurangi Subduction Margin: How Does Lithology Control Slow Slip Events?

AbstractThe northern Hikurangi subduction margin hosts slow slip events (SSEs), which are exceptionally shallow (<15 km). The sedimentary sequence on the incoming plate is therefore representative of the shallow fault material where the SSEs will take place once they enter the subduction zone. Knowledge about the frictional behavior of these sediments is required to know which lithologies are capable of hosting SSEs, and what mechanisms are causing them. Frictional behavior is material specific and depends on sliding velocity, but it is unknown how these natural sediments behave at plate‐rate velocities. We performed laboratory shearing experiments testing the major lithologies sampled during International Ocean Discovery Program (IODP) Expedition 375, at velocities ranging from the plate convergence rate at the Hikurangi margin (5 cm/year), up to those characteristics of the shallow SSEs (160 and 530 cm/year), under simulated in‐situ as well as standardized conditions. We find that the calcite‐rich pelagic sediments are relatively strong and display the velocity‐weakening frictional behavior required for slip events, whereas other lithologies are weaker and show velocity‐neutral to velocity‐strengthening friction. We observe spontaneous laboratory SSEs in the calcareous pelagic sediments, which show partial locking in between sliding events, consistent with the interpretation of SSEs within the spectrum of slow to fast earthquakes. For the Hikurangi margin, our results suggest that SSE occurrence requires the stronger carbonate‐rich unit to be incorporated into the plate‐boundary fault zone, which we suggest occurs because the rough incoming plate introduces geometrical complexity into the fault zone.